delta/linux.git/drivers/input/mouse, branch proc-cmdline

Input: alps - fix reporting pressure of v3 trackstick

2018-04-23T23:38:16+00:00

According to documentation, all 7 lower bits represents trackpoint pressure.

Fixes: 4621c9660459 ("Input: alps - report pressure of v3 and v7 trackstick")
Signed-off-by: Pali Rohár 
Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2018-04-04T23:11:49+00:00

Prepare input updates for 4.17 merge window.

Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370

2018-03-30T22:30:25+00:00

The primary interface for the touchpad device in Thinkpad L570 is SMBus,
so ALPS overlooked PS2 interface Firmware setting of TrackStick, and
shipped with TrackStick otp bit is disabled.

The address 0xD7 contains device number information, so we can identify
the device by checking this value, but to access it we need to enable
Command mode, and then re-enable the device. Devices shipped in Thinkpad
L570 report either 0x0C or 0x1D as device numbers, if we see them we assume
that the devices are DualPoints.

The same issue exists on Dell Latitude 7370.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929
Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads")
Signed-off-by: Masaki Ota 
Tested-by: Aaron Ma 
Tested-by: Jonathan Liu 
Tested-by: Jaak Ristioja 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov

Input: alps - report pressure of v3 and v7 trackstick

2018-03-27T00:03:05+00:00

ALPS v3 and v7 packet formats reports trackstick pressure. This information
is already parsed in unused "z" variable.

ALPS SS4 S2 devices already reports trackstick pressure as ABS_PRESSURE
attribute, therefore reports pressure in the same way also for v3 and v7.

This patch also updates parsing v3 pressure information, it is also stored
in 7 bits.

Signed-off-by: Pali Rohár 
Signed-off-by: Dmitry Torokhov

Input: synaptics_usb - do not rely on input_dev->users

2018-03-17T18:05:18+00:00

If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().

input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:

	if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) &&
	    usb_submit_urb(synusb->urb, GFP_NOIO) < 0) {
		retval = -EIO;
	}

The same URB will then be fail when resubmitted in synusb_open().

Introduce synusb->is_open to keep track of the state instead.

Signed-off-by: Marcus Folkesson 
Signed-off-by: Dmitry Torokhov

Input: synaptics_usb - fix deadlock in autosuspend

2018-03-17T18:05:18+00:00

usb_autopm_get_interface() that is called in synusb_open() does an
autoresume if the device is suspended.

input_dev->mutex used in synusb_resume() is in this case already
taken by the input subsystem and will cause a deadlock.

Signed-off-by: Marcus Folkesson 
Signed-off-by: Dmitry Torokhov

Merge branch 'psmouse' into next

2018-03-17T17:58:05+00:00

Merge various PS/2 handling improvements.

Input: appletouch - use true and false for boolean values

2018-03-14T17:13:08+00:00

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Dmitry Torokhov

Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"

2018-03-07T23:50:29+00:00

This reverts commit 48282969826b3d3c76e908182f69724d86d995fe which
caused the following issues:

1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working
after suspend-resume cycle. Due to strange state of the device another
suspend is impossible.

The following dmesg errors can be observed:
thinkpad_acpi: EC reports that Thermal Table has changed
rmi4_smbus 7-002c: failed to get SMBus version number!
rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16.
rmi4_f01 rmi4-00.fn01: Resume failed with code -16.
rmi4_physical rmi4-00: Failed to suspend functions: -16
rmi4_smbus 7-002c: Failed to resume device: -16
PM: resume devices took 0.640 seconds
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16).
rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
psmouse: probe of serio3 failed with error -1

2. On another T460p with BIOS version 2.15 two finger scrolling gesture
on the touchpad stops working after suspend-resume cycle (about 75%
reproducibility, when it still works, the scrolling gesture becomes
laggy). Nothing suspicious appears in the dmesg.

Analysis form Richard Schütz:

"RMI is unreliable on the ThinkPad T460p because the device is affected
by the firmware behavior addressed in a7ae81952cda ("i2c: i801: Allow
ACPI SystemIO OpRegion to conflict with PCI BAR")."

The affected devices often show:

i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited

Reported-by: Richard Schütz 
Signed-off-by: Arkadiusz Hiler 
Tested-by: Martin Peres 
Tested-by: Arkadiusz Hiler 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov

Input: synaptics - handle errors from input_mt_init_slots()

2018-02-03T01:04:08+00:00

input_mt_init_slots() may fail, we need to handle this condition.

Signed-off-by: Dmitry Torokhov