version 1.8.14 2014-03-28 * ID: 299 - openipmi plugin writes zero to wrong byte * ID: 301 - Add OS/Hypervisor installation status events * ID: 298 - fix LANplus retry * ID: 295 - inform user if SOL session disconnected * ID: 297 - don't print-out SEL entry if ID not present * ID: 296 - Fix PSD size decoding * ID: 293 - Use of uninitialized variable in ipmi_main() * ID: 278 - Error in sol looptest * ID: 290 - ipmi_sol.c needs a clean-up * ID: 85 - Supermicro memory ECC error display * ID: 290 - ipmi_sol.c needs a clean-up * ID: 286 - Open session retries hit assert in ipmi_lanplus_send_payload * ID: 285 - Fix SEGV in ipmi_lanplus_open_session * ID: 284 - Fix SEGV in ipmi_main * ID: 283 - ipmi_intf_socket_connect fails with IPv4 hosts * ID: 46 - ipmi_fwum needs some re-work * ID: 50 - ipmi_hpmfwupg needs a clean up * ID: 279 - ipmitool sdr list broken * ID: 44 - dummy interface support - fake-ipmistack project * ID: 48 - Remove hard-coded FRU inventory access length restriction * ID: 276 - HPM.1 upgrade combined patch * ID: 90 - Add options to chassis bootparam set bootflag * ID: 292 -Properly handle plugin non-zero target adddress with -t * Numerous Fixes based on running Coverity * Use TIOCFLUSH if TCFLSH is missing to get the serial plugin building on Hurd. * Disable imb and open plugins by default on Hurd. The platform lack the required kernel support. * Change serial plugin to only try to disable the IUCLC serial line flag on platforms supporting it. Fixes build problem on Hurd and FreeBSD. * PA: 83 - Revised IPv6 patch * FR: 24 - Exchange OS Name Hostname BMC URL during startup * ID: 304 - Incorect byteswap in SOL maximum payload * ID: 303 - Fix build error in HPM.2 code * ID: 300 - new sunoem functionality * ID: 144 - Fix 'dcmi power set_limit action ' * ID: 302 - HPM.2 long message support * ID: 309 - Add new SEL entries for ipmi 2.0 rev 1.1 version 1.8.13 2013-09-09 * ID: 3611905 - Direct Serial Basic/Terminal Mode Interface drivers * ID: 3577766 - configure's knobs and switches don't work * ID: 3611253 - do not override OS-default values for interfaces * ID: 65 - Fixes for configure.in for cross compilation * ID: 3571153 - OpenIPMI/ipmievd fails to compile on Solaris * numerous ipmitool man page updates * ID: 3611226 - Bridging support for PICMG Platforms * Add support for getsysinfo/setsysinfo commands to ipmi mc * Cleanup Dell OEM code to use new sysinfo interface * ID: 93 - str-to-int conversion is weak * ID: 3582307 - ipmi_fru - ipmi_fru_main() return codes * ID: 3582310 - ipmi_fru - ipmi_fru_main() - misuse of printf() * ID: 3576213 - ipmi_fru - unused variable * ID: 3578276 - ipmi_fru - free() on freed memory possible * ID: 3578275 - ipmi_fru - memory leaks * ID: 3528271 - ipmi_fru - possible *flow via FRUID * ID: 3578277 - ipmi_fru - possible NULL pointer * ID: 3612372 - Recognize Broadcom IANA number and BCM5725 product * ID: 3608758 - add IPMI_NETFN_OEM * ID: 143 - Reversed 'channel authcap' capabilities Fixes reversed IPMIv1.5/2.0 'channel authcap' capabilities * ID: 3587318 - "dcmi discover" is not DCMI 1.5 compatible * ID: 3608757 - ipmi_fru - various fixes * ID: 3598203 - 'mc getsysinfo|setsysinfo' needs a bit of re-work * ID: 3597782 - ipmi_mc - sysinfo_param() has two consecutive returns * ID: 3597781 - 'mc getsysinfo|setsysinfo' help has typos * ID: 3608763 - ipmi_sdr - code cleanup & output display cleanup * ID: 3610286 - ipmi_sdr - ipmi_sdr_print_type - incorrect eval * ID: 3600930 - ipmi_sdr - code cleanup * ID: 3602439 - ipmi_sdr - memory leaks * ID: 3595199 - ipmi_sdr - Add support for 'ipmitool sdr help' * ID: 3592773 - 'ipmitool sdr info'; prints incorrect info * ID: 3592770 - 'ipmitool sdr list|elist INV_INPUT' return code * ID: 3577159 - ipmi_sdr - uint32_t cast to uint8_t and back * ID: 3528368 - ipmi_sdr - possible int *flow * ID: 226 - ipmi_sdradd - typo * ID: 258 - ipmi_sdradd - error printed on STDOUT * Fixed ipmievd start under systemd. * ID: 3608760 - Add bswap.h to ipmi_chassis.c and ipmi_pef.c * ID: 3564701 - ipmitool 1.8.12 doesn't build on big endian architectures * ID: 3600907 - defined value for "Chassis may not support Force Identify" * ID: 256 - ipmitool could crash when IPv6 address is returned * ID: 211 - 'lib/ipmi_dcmi.c' - typo & error printed on STDOUT * ID: 3612237 - If DCMI command fails, incorrect completion code is printed * ID: 3608149 - ipmitool - set pointer to NULL after free() * ID: 3603419 - DCMI - waste of resources * ID: 3600908 - DMCI - crash in ipmi_print_sensor_info(), NULL ref * ID: 3609985 - delloem : Wrong MAC returned when flex addressing is enabled * ID: 113 - delloem exec file won't handle more than one command * ID: 28 - delloem - clean up the code * ID: 3608261 - delloem - code formatting * ID: 3528247 - delloem - fix possible *int flows * ID: 3600910 - delloem - code cleanup * ID: 3576211 - delloem - unused variable * ID: 3578022 - delloem - fix typos * ID: 263 - ipmi_ek* - cleanup * ID: 3308765 - ipmi_ek* - cleanup * ID: 3586228 - ipmi_ek* - ipmi_ekanalyzer_usage() rework * ID: 3528388 - ipmi_ek* - a typo in error message * ID: 3576212 - ipmi_event - better rsp handling * ID: 3607393 - ipmi_event - redundant '\n' in error message * ID: 153 - ipmi_firewall - printf() used instead of lprintf() * ID: 3608003 - ipmi_fru - atol() should be replaced with str2*() * ID: 3600911 - ipmi_fru - fix multiple increments in args to printf * ID: 3600914 - no more crash on no response. allow more send/recv loops of waiting. * ID: 70 - Fixes and updates for ipmitool hpm * ID: 3528308 - ipmi_hpmfwupg - possible int *flow * ID: 3608762 - ipmi_hpmfwup - Fixed help messages for hpm command * ID: 3607981 - ipmi_lanp - replace atoi() calls * ID: 3607320 - ipmi_lanp - possible NULL reference * ID: 3600926 - ipmi_lanp - code cleanup * ID: 3613575 - memory leak - ipmi_password_file_read() * ID: 3522740 - reading password from file is limited to 16byte passwords * ID: 3613605 - ipmi_main - call free() on pointer to static data * ID: 3608761 - ipmi_main - PICMG Get Device Locator was never run * ID: 3577155 - ipmi_main' - memory leaks * ID: 239 - typo in 'mc selftest', add details * ID: 3597471 - ipmi_mc - needs a bit of re-work - rc, inv. options * ID: 3597468 - ipmi_mc - print_mc_usage() prints to STDOUT * ID: 3597469 - 'mc watchdog off' prints on STDERR, should be STDOUT * ID: 3597470 - 'mc watchdog reset' prints on STDERR, should be STDOUT * ID: 3611254 - OEM handle for Intel 82751 in SPT mode * ID: 3600927 - change eval order of input param in ipmi_oem_setup() * ID: 3600928 - ipmi_pef - code cleanup * ID: 3592732 - ipmi_picmg.c - printf() misuse * ID: 3528310 - ipmi_picmg.c - NULL reference * ID: 3528347 - ipmi_raw.c - possible int *flow * ID: 3587913 - Command % ipmitool raw help; returns 1 * Added code to support sensors on other luns (On behalf of Kontron Germany) * ID: 3611912 - Add missing newlines when cvs output is specified * ID: 244 - ipmi_sel - "0.0" displayed for unspecified threshold values * ID: 3612371 - Typo in impi_sel debug output * ID: 3016359 - ipmi_sel - Get SEL Alloc Information is incorrect * ID: 3568976 - 'sel set time' behaviour is inconsistent * ID: 3528371 - ipmi_sensor - possible int *flow * ID: 3601265 - 'ipmitool sensor get' leaks memory * ID: 3601106 - 'ipmitool sensor get NACname' output incorrect/inconsistent * ID: 3608007 - ipmi_session - typo in error message * ID: 101 - ipmi_sol - possible int *flow * ID: 3600933 - ipmi_sol - use of deprecated bzero() * ID: 3609472 - ipmi_sol - Add the instance to the SOL commands * ID: 3588726 - 'ipmitool sol payload status ...;'segfaults on no rsp * ID: 3522731 - ipmi_sol - ipmi_get_sol_info() returns always 0 * ID: 3613042 - add missing Entity IDs * ID: 3611306 - ipmi_tsol - fix always fail in case of error * ID: 259 - ipmi_user - memory leak * ID: 260 - ipmi_user - replace atoi() call * ID: 2871903 - ipmitool user priv incorrectly sets Link Auth * ID: 3600960 - check the copy of password exists * ID: 3609473 - Add assertion/deassertion to threshold events * ID: 104 - ipmishell - possible int *flow * ID: 262 - 'set' segfaults when no IPMI inf present * ID: 257 ipmitool exec segfaults if invalid input given * ID: 254 - Fix retry of authentication capabilities retrieval * ID: 3611303 - lan - error check is missing braces * ID: 253 - Fix lanplus retransmission * ID: 212 - 'lib/ipmi_dcmi.c' - possible int *flow * ID: 264 - incorrect array index in get_lan_param_select() * ID: 269 - Fixes for configure.in for cross compilation * ID: 267 - Corruption in "lan alert print" output * ID: 41 - ipmi_sel_interpret() - clean up formatting, indentation * ID: 242 - Incorrect DCMI Power Reading "IPMI timestamp" interpretation * ID: 229 - 'lib/ipmi_ekanalyzer.c' - a typo ``Too few argument!'' * ID: 266 - file descriptor leak in ipmi_fwum and ipmi_ekanalyzer * ID: 99 - 'lib/ipmi_sel.c' - possible int *flow * ID: 222 - 'lib/ipmi_sdr.c' - a typo 'Not Reading' -> 'No Reading' * ID: 35 - Script to setup redirection of SNMP to/from BMC * ID: 273 - Reduce SOL Input buffer size by SOL header size version 1.8.12 released 2012-08-09 * Added IPMB dual bridge support (no need for driver support) * Enable compiler warnings and resolve all compiler warning so that ipmitool compiles and links with no warning or error messages * add ipmishell line to configure * fail configure when no curses or readline is found * support sensor bridging in free interface * applied fix for issue #2865160 (AIX build) * Document the ipmitool dcmi commands in the ipmitool man page * Document that some commands are blocked by OpenIPMI. ID 2962306 * Document the -N and -R options per tracker ID 3489643 * fix manpage misdocumentation on cipher suite privilige configuration * Add build support for Dell OEM commands * Add new Dell OEM commands and update man page * added hpm and fwum in man page * man page update for fwum and hpm commands * Added documentation for 'ime' operating mode, used to update Intel ME. * add new -Y option to prompt user to enter kgkey * Add DCMI module (Data Center Management Interface) * fixed oem/iana data type to allow 24 bits definition * Fixed AMC point-to-point record parsing in FRU * Fixed detection of packing support in GCC * Added packing support detection magic on all packed structures in project * Dell specific mac sub command is updated to support the latest 12G Dell servers. Support for virtual mac is also implemented. * Use consistent netfn/cmd for getsysinfo command * Add Dell OEM network commands * Resolve incorect Board Mfg Data due to incorrect date constant * Update ipmi_fru.h to SMBIOS spec 2.6.1 - ID 2916398 * Support for analog readings in discrete sensors on HP platforms. * Change device id mask (IPM_DEV_DEVICE_ID_REV_MASK) 0x07 for 0x0F. As per in IPMI spec V2: * Added PICMG clock e-keying and bused resource control identifiers * Added PICMG major version (ATCA/AMC/uTCA) identifiers * Correct Threshold/Discrete Sensor Display - Patch Tracker ID 3508759 * Sensor units now handle percentage units - ID 3014014 * Fixes ID 3421347 Sensor list command should use channel field from SDR * Added packing directive for ARM cross compile with GCC 3.4.5, otherwise the sdr structures gets padded and the pointer cast result in incorrect alignement * Added 'sdr fill sensors nosats' support to speed up SDR discovery * Added SDR name display during discovery (with -v) * Added support for sensor types - Processor related sensor type 0x07, system incharectorization 0x20, Memory sensor type. * Give more description for SEL which is generated for Uncorrectable ECC and errors with respect to each Memory Bank,Card or DIMM. The Sensor type supporting this are 0x0C and 0x10. * Add more details about Version Change event (source of firmware update) * enhanced PICMG fru control * Integrated Andy Wray's DDR3 SPD parser patch * Adds function str2uint() to convert from string to uint32_t with checks for valid input. * Fix possible buffer overflow in buf2str() * Fixes ID 3485004 - misuse of strtol() * Replaces calls to strtol() with str2uchar() calls and adds error messages if invalid input is given. * Don't overwite the iflags bits prior to setting the boot parameters. This fixes ipmitool so that chassis bootdev bios clear-cmos=yes will correctly clear the bios cmos. * Clarify DCMI get limit activation (add if activate or not). * Bug fixes for delloem lan command. This includes the support for 12G Dell license and 12G LAN Specific command. * delloem commands should not be executed before parsing command line. * Fix stack overflow in delloem setled * Fix delloem powermonitor on big-endian platforms. * ipmitool delloem powermonitor command should convert data from network-format to the native one, otherwise it shows garbage on ppc/ppc64 platform. * Add ipmi_getsysinfo command * Add support for drive backplane SetLED functionality * Fix for Platform Event Message incorrect Generator ID * Fix fru print so that it will display FRU info from satellite controllers. * Add support for AMC type 17h record. * Fix in fru edit. It is now possible to edit field 0 of sections * New FRU get OEM record command * fixed segfault for fru edit when "field id" is not supported and added user feedback for string substitution(success or failure) * Improvement to hpm upgrade during activation. This resolves issue where activation seems to have failed because ipmitool received an unsupported completion code. * hpm Fixes for multi-platform support. * hpm Fix for timeouts during firmware rollback. If completion code is C3, wait till timeout has expired before reporting it. * hpm During manual rollback, code now gets target capabilities instead of using a default timeout of 60 seconds. * Added firmware auxilliary bytes to hpm outputs * hpm Add support for BIG Buffer (Use when -z option is used) * Fix the case where ipmitool loses the iol connection during the upload block process. Once IPMITool was successfully sent the first byte, IPMITool will not resize the block size. * Fix the problem when we try to upgrade specific component and the component is already updated, * updated HPM firmware agent to version 1.04 * Fix exit code to return zero on '-o list' or '-o help' option * limit length of user name and password that can be supplied by user. Password is limited to 16 bytes, resp. 20 bytes, for LAN, resp. LAN+, interface. User name is limited to 16 bytes, no interface limitations. ID 3184687, ID 3001519 * Add retry / timeout options for LAN * Changed default cipher suite to 1 instead of 3 for iol20 * added fix for tracker ID 2849300 "Incorrect Firmware Revision" * avoid reopening the interface when already opened * Remove message for unsupported PEF capabilities that return valid CC (80h) * Added OEM byte (47) to verbose output * Add option to provide a list when filling sdr repository * SDR discovery speedups * Added support for Dell specific sensors * Fix segmentation fault on unrecognize OEM events. * changed SEL timestamp formatting for 'preinit' SEL entries, allowing the number of seconds to be displayed. * Added sensor raw data in verbose mode. Useful for OEM sensor type. * Add sensor hysteresis (positive & negative) to the following command ipmitool sensor -v * Fixes bug ID 3484936 - missing user input validation * Add missing RMCP+ auth type strings * Add new Kontron Product in ipmi_strings for product ID. Kontron KTC5520/EATX Server Motherboard with integrated iBMC/KVM/VM added identification support for Kontron AT8050 ATCA board * Constrain setting of the username to no greater than 16 characters per the IPMI specification. ID 3001519 * Constrain User ID between 1 and 63. ID 3519225 * Fixes ID 3485340 - user input not handled in 'lib/ipmi_user.c' * Fixes ignorance of existing daemon PID file which results in PID being overwritten. Adds proper umask() before writing PID file. * applied fix for ID 2865111 (AIX build) * Fix a proplem when using bridged IPMI commands on the lanplus interface (-I lanplus with -b -t or -m switches) resulting in "Close Session command failure". * Add fix with usage of CFh (duplicate request). Usefull for slow commands * Fix issue with sequence number. (Speed up transfer) version 1.8.11 released 2009-02-25 * Fix new GCC compilation issues in regards to Packing * Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded for 2.4 kernel instead of ipmi_si_drv driver module * New -y option added to allow specification of kg keys with non-printable characters * New -K option added to allow kgkey settings via environmental variable IPMI_KGKEY * Generic device support added for EEPROM with SDR Type 10h (gendev) * Fix to lan-bridging for a double-bridging crash and to fix an issue with bridging multiple concurrent requests and erroneous handling of raw Send Message * Lanplus fix for commands like 'sensor list' without the -t option causing wrong double bridged requests of a sensor is located on another satellite controller * Fix lan and lanplus request list entry removal bugs * Fix non-working issue when trying to send a bridge message with Cipher 3 * Change bridge message handling to reuse command ipmi_lan_poll_recv * Added PICMG 2.0 and 2.3 support * Fix PICMG (ATCA) extension verification and reversal of BCD encoded values for "major" and "minor" fields * Add IANA support for Pigeon Point * Add OEM SW/FW Record identification * Fix to include I2C and LUN addresses so sensors are correctly managed * Patch ID 1990560 to get readings from non-linear analog sensors * Add support for SOL payload status command * SOL set parameter range checking added * Fixed SOL activate options usage * Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967) * Added retries to SOL keepalive * Fixed wrong mask values for Front Panel disable/enable status * Add support to access fru internal use area * Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow blocks of data within the FRU storage area to be write protected. * Fix node reporting in GUID; Tracker bug #2339675 * Fix watchdog use/action print strings * Fix endian bug in SDR add from file; Tracker bug #2075258 * Fix crash when dumping SDRs in a file and there's an error getting an SDR; improve algorithm for optimal packet size * Fix occasional SDR dump segfault; #1793076 * Allow ipmitool sel delete to accept hex list entry numbers * Fix SEL total space reporting. * Fix for garbage sensor threshold values reported when none returned. Tracker Bug #863748 * ipmievd change to Monitor %used in SEL buffer and log warnings when the buffer is 80% and 100% full version 1.8.10 released 2008-08-08 * Added support for BULL IANA number. * Fixed contrib build so the oem_ibm_sel_map file gets included in rpm builds again. * Added support for Debian packages to be built from CVS * Fix for sdr and sel timestamp reporting issues * Fix for discrete sensor state print routines to address state bits 8-14 * Change ipmi_chassis_status() to non-static so it can be used externally * Added retries to SOL keepalive * Fix to stop sensor list command from reporting a failure due to missing sensor * Fix bug in sdr free space reporting * Add support for IANA number to vendor name conversion for many vendors * Fix segfault bug in lan set command * Fix bug in population of raw i2c wdata buffer * Fix bug in ipmb sensor reading * Fix misspellings, typos, incorrect strncmp lengths, white space * Update/fix printed help and usages for many commands * Add and update support for all commands in ipmitool man page * Fix for lanplus session re-open when the target becomes unavailable following a fw upgrade activation * Add support for watchdog timer shutoff, reset, and get info * Add support for more ibm systems in oem_ibm_sel_map * Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU info to 16 bytes at a time to allow more DIMM FRUs to respond. * Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg buffer length more aggressively when no response from iol * Fix HPM firmware activation via IOL; fake a timeout after IOL session re-open to force get upgrade status retry; Added retries on 0xD3 completion code * Add support for freeipmi 0.6.0; adjust autoconf for changes * Fix for oemval2str size * Add support for product name resolution in mc info * Fix FRU display format * Added PICMG ekeying analyzer module support (ekanalyzer); display point to point physical connectivity and power supply information between carriers and AMC modules; display matched results of ekeying match between an on-carrier device and AMC module or between 2 AMC modules * Fix AMC GUID display support * Improved amcportstate operations * Added resolution for new sensor types * Fix segfault in SOL * Fix bug that caused infinite loop on BMCs with empty SDRs * Fix to move out Kontron OEM sensor resolution for other OEMs which could lead to bad event descriptions * Add new FRU edit mode thereby allowing serial numbers, etc. to be changed; improvements to OEM edit mode * Added SPD support for parms: channel number, max read size * Add SDR support for adding SDR records from a dumped file, clearing SDR, adding partial SDR records * Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS, handle long response option, implement rollback override, garbage output fix * Add double bridge lan support , fix bridging issue * Add HPM support to pre-check which components need to be skipped * Fix autodetection of maximum packet size when using IPMB * Add new Kontron OEM command to set the BIOS boot option sequence * Add support for dual-bridge/ dual send message * Add auto-detect for local IPMB address using PICMG 2.X extension * Add support for HPM.1 1.0 specification compliance * Fix for improper lan/lanplus addressing * Added transit_channel and transit_addr to ipmi_intf struct * Fix bad password assertion bug due to rakp2 HMAC not being checked properly * Added ability to interpret PPS shelf manager clia sel dump * Corrected PICMG M7 state event definition macros * Added FRU parsing enhancements * Added "isol info", "isol set" and "isol activate" commands to support Intel IPMI v1.5 SOL functionality. Removed "isol setup" command. * Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces. * Fix bug in "chassis poh" command. * Fix HPM.1 upgrade to apply to only given component when instructed to do so * Added configure auto-detection if dual bridge extension is supported by OpenIPMI version 1.8.9 released 2007-03-06 * Added initial AMC ekey query operation support * Improvements to ekeying support (PICMG 3.x only) * Added initial interactive edition support for multirec; added IANA verification before interpreting PICMG records. * Added edit support for AMC activation "Maximum Internal Current" * Fix bug generating garbage on the screen when handling GetDeviceId and sol traffic occurs * Added ability to map OEM sensor types to OEM description string using IANA number; moved IANA number table * Fix lan set access command to use value already saved within parameters for PEF and authentication * Fix bug in cmd ipmitool lan stats get 1 * Add support to allow ipmitool/ipmievd to target specific device nodes on multi-BMC systems * Add support for name+privilege lookup for lanplus sessions * Fix time_t conversion bug for 64-bit OS * Added prefix of hostname on sel ipmievd sessions * Fixed FWUM Get Info * Fix ipmievd fd closing bug * Add set-in-progress flag support to chassis bootdev * Added new chassis bootdev options * Add sol payload enable/disable comman * Fix SOL set errors when commit-write not supported * Fix reset of session timeout for lanplus interface * Fixed lan interface accessibility timeout handling * Fix bug with Function Get Channel Cipher Suites command when more than 1 page used. * Fix missing firmware firewall top-level command * Fix bug in SOL keepalive functionality * Fix SOLv2 NACK and retry handling for Intel ESB2 BMC * Added ipmi_sel_get_oem_sensor* APIs * Added HPM.1 support * Fix segfault when incorrect oem option supplied * Fix bus problem with spd command * Fix segfault in SOL when remote BMC does not return packet * Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes * Added lan packet size reduction mechanism * Fix bug with sendMessage of bad length with different target * Fix for big endian (PPC) architecture * NetBSD fixes * Fix segfault and channel problem with user priv command * Add support for bus/chan on i2c raw command * Add freeipmi interface support * Add remote spd printing * Add better detection of linux/compiler.h to config * Makefile changes to fix makedistcheck, etc. version 1.8.8 * Fix segfaults in sensor data repository list * Fix ipmievd to open interface before daemonizing * Fix IPMIv1.5 authtype NONE to ignore supplied password * Fix cipher suite display bug in lan print * Fix typo in IPMIv2 SOL output when sending break * Fix improper LUN handling with Tyan SOL * Add LUN support to OpenIPMI interface * Add support for Kontron OEM commands * Update to Kontron Firmware Update command version 1.8.7 * Remove nuclear clause from license * Add Sun OEM command for blades * Increase argument size for raw commands in shell/exec * Fix handling of LUNs for LAN interfaces * Add IPMIv2 SOL loopback test * Add support for IBM OEM SEL messages * Disable file paranoia checks on read files by default * Support IPMIv2 SOL on older Intel boxes * Display message and exit if keepalive fails during SOL * Add support for setting VLAN id and priority * Add support for FreeBSD OpenIPMI-compatible driver * Add support for IPMIv2 Firmware Firewall * Fix gcc4 compile warnings * Make ipmievd generate pidfile * Add initscripts for ipmievd version 1.8.6 * Fix memory corruption when sending encrypted SOL traffic * Add keepalive timer to IPMIv2 SOL sessions version 1.8.5 * Add support for settable SOL escape character with -e option * Add support for Kg BMC key for IPMIv2 authentication with -k option * Add support for Tyan IPMIv1.5 SOL with tsol command * Add support for PICMG devices * Add support for OEM SEL event parsing * Add support for command bridging over lan and lanplus interfaces * New 'chassis selftest' command * Many bufxies and patches from contributors version 1.8.3 * Add support for 'sel readraw' and 'sel writeraw' commands. * Add support for entering NetFn as a string for RAW commands. * Add support for appending distro tag to integrated RPM builds. * Fix LAN parameter printing to handle Invalid Data Field response without errors. * Add 5ms delay to IPMIv2 SOL retry packets * IPMIv2 interface will now correctly set session privilege level to requested level after session is opened. version 1.8.2 (released May 18 2005) * Fix FRU reading for large (>255 bytes) areas. * Overhaul to ipmievd to support SEL polling in addition to OpenIPMI. * Fix LAN parameter segfault when no Ciphers supported by BMC. * Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus). * Separate option parsing code from main ipmitool source file. * Add raw I2C support with IPMI Master Read-Write command. * Add support for new 'sdr elist' extended output format. * Add support for listing sensors by type with 'sdr type' command. * Add support for new 'sel elist' extended output format that cross-references events with sensors. * Add support for sending dynamically generated platform events based on existing sensor information. * New '-S' argument to read local SDR cache created with 'sdr dump'. * Updated manpage for ipmitool and ipmievd. version 1.8.1 * ipmievd installs in /usr/sbin version 1.8.0 * Fix IPMIv2.0 issues * Fix chassis boot parameter support * Add support for linear sensors version 1.7.1 * Update bmc plugin to work with new Solaris bmc driver (new ioctl for interface detection and new STREAMS message-based interface) version 1.7.0 * Propogate errors correctly so exit status will be useful * More consistent display of errors including completion code text * Errors and debug is send to stderr now * New "sel get" command that will print details about SEL entry and corresponding SDR records as well as FRUs via entity association * Improved event generator, now supports reading events from text file * New "-o oemtype" option for specifying OEM boards exsting types are "supermicro" and "intelwv2" * New PEF subsystem from Tim Murphy at Dell * New "bmc" plugin for Solaris 10 x86 * Many bugfixes and contributed patches version 1.6.2 * Support for Supermicro BMC OEM authentication method version 1.6.1 * Fix minor problem with LAN parameter setting version 1.6.0 * Add a README file * Add Solaris x86 interface plugin * Add support for building Solaris packages * Fix segfault when doing "sel list" (from Matthew Braithwaite) * Fix "chassis identify" on some BMCs (from ebrower@sourceforge) * Add command "bmc info" and related output (from ebrower@sourceforge) * Add support for IPMIv2 and Serial-over-LAN from Jeremy at Newisys * Add support for building RPMs as non-root user * Add new "shell" and "exec" commands * Lots of other contributed patches version 1.5.9 * Add ability to get a particular sensor by name * Add ability to set a particular sensor threshold * Add support for displaying V2 channel authentication levels * Add README for rrdtool scripts in contrib directory * Improve lan interface retry handling * Support prompting for password or reading from environment * Move chaninfo command into channel subcommand * Fix reservation ID handling when two sessions open to BMC * Fix reading of large FRU data * Add configure option for changing binary to ipmiadm for Solaris * Fix compile problem on Solaris 8 version 1.5.8 * Enable static compilation of interfaces * Fix types to be 64-bit safe * Fix compilation problems on Solaris * Fix multiple big-endian problems for Solaris/SPARC * Fix channel access to save settings to NVRAM * Set channel privilege limit to ADMIN during "access on" * Enable gratuitous ARP in bmcautoconf.sh * Add support for Linux kernel panic messages in SEL output * Add support for type 3 SDR records version 1.5.7 * Add IPMIv1.5 eratta fixes * Additions to FRU printing and FRU multirecords * Better handling of SDR printing * Contrib scripts for creating rrdtool graphs version 1.5.6 * Fix SEL event decoding for generic events * Handle empty SEL gracefully when doing "sel list" * Fix sdr handling of sensors that do not return a reading * Fix for CSV display of sensor readings/units from Fredrik Öhrn version 1.5.5 * Add -U option for setting LAN username * Fix -v usage for plugin interfaces version 1.5.4 * Put interface plugin API into library * Fix ipmievd version 1.5.3 * Add -g option to work with grizzly bmc version 1.5.2 * Add support for setting gratuitous arp interval version 1.5.1 * Better SEL support * Fix display bug in SDR list version 1.5.0 * More robust UDP packet handling * Add Intel IMB driver support * Use autoconf/automake/libtool