/* GStreamer * Copyright (C) <2006> Edward Hervey * Copyright (C) <2009> Sebastian Dröge * Copyright (C) <2011> Hewlett-Packard Development Company, L.P. * Author: Sebastian Dröge , Collabora Ltd. * Copyright (C) <2013> Collabora Ltd. * Author: Sebastian Dröge * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, * Boston, MA 02110-1301, USA. */ /** * SECTION:element-decodebin * * #GstBin that auto-magically constructs a decoding pipeline using available * decoders and demuxers via auto-plugging. * * decodebin is considered stable now and replaces the old #decodebin element. * #uridecodebin uses decodebin internally and is often more convenient to * use, as it creates a suitable source element as well. */ /* Implementation notes: * * The following section describes how decodebin works internally. * * The first part of decodebin is its typefind element, which tries * to determine the media type of the input stream. If the type is found * autoplugging starts. * * decodebin internally organizes the elements it autoplugged into GstDecodeChains * and GstDecodeGroups. A decode chain is a single chain of decoding, this * means that if decodebin every autoplugs an element with two+ srcpads * (e.g. a demuxer) this will end the chain and everything following this * demuxer will be put into decode groups below the chain. Otherwise, * if an element has a single srcpad that outputs raw data the decode chain * is ended too and a GstDecodePad is stored and blocked. * * A decode group combines a number of chains that are created by a * demuxer element. All those chains are connected through a multiqueue to * the demuxer. A new group for the same demuxer is only created if the * demuxer has signaled no-more-pads, in which case all following pads * create a new chain in the new group. * * This continues until the top-level decode chain is complete. A decode * chain is complete if it either ends with a blocked endpad, if autoplugging * stopped because no suitable plugins could be found or if the active group * is complete. A decode group on the other hand is complete if all child * chains are complete. * * If this happens at some point, all endpads of all active groups are exposed. * For this decodebin adds the endpads, signals no-more-pads and then unblocks * them. Now playback starts. * * If one of the chains that end on a endpad receives EOS decodebin checks * if all chains and groups are drained. In that case everything goes into EOS. * If there is a chain where the active group is drained but there exist next * groups, the active group is hidden (endpads are removed) and the next group * is exposed. This means that in some cases more pads may be created even * after the initial no-more-pads signal. This happens for example with * so-called "chained oggs", most commonly found among ogg/vorbis internet * radio streams. * * Note 1: If we're talking about blocked endpads this really means that the * *target* pads of the endpads are blocked. Pads that are exposed to the outside * should never ever be blocked! * * Note 2: If a group is complete and the parent's chain demuxer adds new pads * but never signaled no-more-pads this additional pads will be ignored! * */ /* FIXME 0.11: suppress warnings for deprecated API such as GValueArray * with newer GLib versions (>= 2.31.0) */ #define GLIB_DISABLE_DEPRECATION_WARNINGS #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include "gstplay-enum.h" #include "gstplayback.h" #include "gstrawcaps.h" /* Also used by gsturidecodebin.c */ gint _decode_bin_compare_factories_func (gconstpointer p1, gconstpointer p2); /* generic templates */ static GstStaticPadTemplate decoder_bin_sink_template = GST_STATIC_PAD_TEMPLATE ("sink", GST_PAD_SINK, GST_PAD_ALWAYS, GST_STATIC_CAPS_ANY); static GstStaticPadTemplate decoder_bin_src_template = GST_STATIC_PAD_TEMPLATE ("src_%u", GST_PAD_SRC, GST_PAD_SOMETIMES, GST_STATIC_CAPS_ANY); GST_DEBUG_CATEGORY_STATIC (gst_decode_bin_debug); #define GST_CAT_DEFAULT gst_decode_bin_debug typedef struct _GstPendingPad GstPendingPad; typedef struct _GstDecodeElement GstDecodeElement; typedef struct _GstDecodeChain GstDecodeChain; typedef struct _GstDecodeGroup GstDecodeGroup; typedef struct _GstDecodePad GstDecodePad; typedef GstGhostPadClass GstDecodePadClass; typedef struct _GstDecodeBin GstDecodeBin; typedef struct _GstDecodeBinClass GstDecodeBinClass; #define GST_TYPE_DECODE_BIN (gst_decode_bin_get_type()) #define GST_DECODE_BIN_CAST(obj) ((GstDecodeBin*)(obj)) #define GST_DECODE_BIN(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj),GST_TYPE_DECODE_BIN,GstDecodeBin)) #define GST_DECODE_BIN_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST((klass),GST_TYPE_DECODE_BIN,GstDecodeBinClass)) #define GST_IS_DECODE_BIN(obj) (G_TYPE_CHECK_INSTANCE_TYPE((obj),GST_TYPE_DECODE_BIN)) #define GST_IS_DECODE_BIN_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE((klass),GST_TYPE_DECODE_BIN)) /** * GstDecodeBin: * * The opaque #GstDecodeBin data structure */ struct _GstDecodeBin { GstBin bin; /* we extend GstBin */ /* properties */ GstCaps *caps; /* caps on which to stop decoding */ gchar *encoding; /* encoding of subtitles */ gboolean use_buffering; /* configure buffering on multiqueues */ gint low_percent; gint high_percent; guint max_size_bytes; guint max_size_buffers; guint64 max_size_time; gboolean post_stream_topology; guint64 connection_speed; GstElement *typefind; /* this holds the typefind object */ GMutex expose_lock; /* Protects exposal and removal of groups */ GstDecodeChain *decode_chain; /* Top level decode chain */ guint nbpads; /* unique identifier for source pads */ GMutex factories_lock; guint32 factories_cookie; /* Cookie from last time when factories was updated */ GList *factories; /* factories we can use for selecting elements */ GMutex subtitle_lock; /* Protects changes to subtitles and encoding */ GList *subtitles; /* List of elements with subtitle-encoding, * protected by above mutex! */ gboolean have_type; /* if we received the have_type signal */ guint have_type_id; /* signal id for have-type from typefind */ gboolean async_pending; /* async-start has been emitted */ GMutex dyn_lock; /* lock protecting pad blocking */ gboolean shutdown; /* if we are shutting down */ GList *blocked_pads; /* pads that have set to block */ gboolean expose_allstreams; /* Whether to expose unknow type streams or not */ GList *filtered; /* elements for which error messages are filtered */ GList *filtered_errors; /* filtered error messages */ GList *buffering_status; /* element currently buffering messages */ GMutex buffering_lock; }; struct _GstDecodeBinClass { GstBinClass parent_class; /* signal fired when we found a pad that we cannot decode */ void (*unknown_type) (GstElement * element, GstPad * pad, GstCaps * caps); /* signal fired to know if we continue trying to decode the given caps */ gboolean (*autoplug_continue) (GstElement * element, GstPad * pad, GstCaps * caps); /* signal fired to get a list of factories to try to autoplug */ GValueArray *(*autoplug_factories) (GstElement * element, GstPad * pad, GstCaps * caps); /* signal fired to sort the factories */ GValueArray *(*autoplug_sort) (GstElement * element, GstPad * pad, GstCaps * caps, GValueArray * factories); /* signal fired to select from the proposed list of factories */ GstAutoplugSelectResult (*autoplug_select) (GstElement * element, GstPad * pad, GstCaps * caps, GstElementFactory * factory); /* signal fired when a autoplugged element that is not linked downstream * or exposed wants to query something */ gboolean (*autoplug_query) (GstElement * element, GstPad * pad, GstQuery * query); /* fired when the last group is drained */ void (*drained) (GstElement * element); }; /* signals */ enum { SIGNAL_UNKNOWN_TYPE, SIGNAL_AUTOPLUG_CONTINUE, SIGNAL_AUTOPLUG_FACTORIES, SIGNAL_AUTOPLUG_SELECT, SIGNAL_AUTOPLUG_SORT, SIGNAL_AUTOPLUG_QUERY, SIGNAL_DRAINED, LAST_SIGNAL }; /* automatic sizes, while prerolling we buffer up to 2MB, we ignore time * and buffers in this case. */ #define AUTO_PREROLL_SIZE_BYTES 2 * 1024 * 1024 #define AUTO_PREROLL_SIZE_BUFFERS 0 #define AUTO_PREROLL_NOT_SEEKABLE_SIZE_TIME 10 * GST_SECOND #define AUTO_PREROLL_SEEKABLE_SIZE_TIME 0 /* when playing, keep a max of 2MB of data but try to keep the number of buffers * as low as possible (try to aim for 5 buffers) */ #define AUTO_PLAY_SIZE_BYTES 2 * 1024 * 1024 #define AUTO_PLAY_SIZE_BUFFERS 5 #define AUTO_PLAY_SIZE_TIME 0 #define DEFAULT_SUBTITLE_ENCODING NULL #define DEFAULT_USE_BUFFERING FALSE #define DEFAULT_LOW_PERCENT 10 #define DEFAULT_HIGH_PERCENT 99 /* by default we use the automatic values above */ #define DEFAULT_MAX_SIZE_BYTES 0 #define DEFAULT_MAX_SIZE_BUFFERS 0 #define DEFAULT_MAX_SIZE_TIME 0 #define DEFAULT_POST_STREAM_TOPOLOGY FALSE #define DEFAULT_EXPOSE_ALL_STREAMS TRUE #define DEFAULT_CONNECTION_SPEED 0 /* Properties */ enum { PROP_0, PROP_CAPS, PROP_SUBTITLE_ENCODING, PROP_SINK_CAPS, PROP_USE_BUFFERING, PROP_LOW_PERCENT, PROP_HIGH_PERCENT, PROP_MAX_SIZE_BYTES, PROP_MAX_SIZE_BUFFERS, PROP_MAX_SIZE_TIME, PROP_POST_STREAM_TOPOLOGY, PROP_EXPOSE_ALL_STREAMS, PROP_CONNECTION_SPEED }; static GstBinClass *parent_class; static guint gst_decode_bin_signals[LAST_SIGNAL] = { 0 }; static GstStaticCaps default_raw_caps = GST_STATIC_CAPS (DEFAULT_RAW_CAPS); static void do_async_start (GstDecodeBin * dbin); static void do_async_done (GstDecodeBin * dbin); static void type_found (GstElement * typefind, guint probability, GstCaps * caps, GstDecodeBin * decode_bin); static void decodebin_set_queue_size (GstDecodeBin * dbin, GstElement * multiqueue, gboolean preroll, gboolean seekable); static void decodebin_set_queue_size_full (GstDecodeBin * dbin, GstElement * multiqueue, gboolean use_buffering, gboolean preroll, gboolean seekable); static gboolean gst_decode_bin_autoplug_continue (GstElement * element, GstPad * pad, GstCaps * caps); static GValueArray *gst_decode_bin_autoplug_factories (GstElement * element, GstPad * pad, GstCaps * caps); static GValueArray *gst_decode_bin_autoplug_sort (GstElement * element, GstPad * pad, GstCaps * caps, GValueArray * factories); static GstAutoplugSelectResult gst_decode_bin_autoplug_select (GstElement * element, GstPad * pad, GstCaps * caps, GstElementFactory * factory); static gboolean gst_decode_bin_autoplug_query (GstElement * element, GstPad * pad, GstQuery * query); static void gst_decode_bin_set_property (GObject * object, guint prop_id, const GValue * value, GParamSpec * pspec); static void gst_decode_bin_get_property (GObject * object, guint prop_id, GValue * value, GParamSpec * pspec); static void gst_decode_bin_set_caps (GstDecodeBin * dbin, GstCaps * caps); static GstCaps *gst_decode_bin_get_caps (GstDecodeBin * dbin); static void caps_notify_cb (GstPad * pad, GParamSpec * unused, GstDecodeChain * chain); static void flush_chain (GstDecodeChain * chain, gboolean flushing); static void flush_group (GstDecodeGroup * group, gboolean flushing); static GstPad *find_sink_pad (GstElement * element); static GstStateChangeReturn gst_decode_bin_change_state (GstElement * element, GstStateChange transition); static void gst_decode_bin_handle_message (GstBin * bin, GstMessage * message); static gboolean gst_decode_bin_remove_element (GstBin * bin, GstElement * element); static gboolean check_upstream_seekable (GstDecodeBin * dbin, GstPad * pad); static GstCaps *get_pad_caps (GstPad * pad); #define EXPOSE_LOCK(dbin) G_STMT_START { \ GST_LOG_OBJECT (dbin, \ "expose locking from thread %p", \ g_thread_self ()); \ g_mutex_lock (&GST_DECODE_BIN_CAST(dbin)->expose_lock); \ GST_LOG_OBJECT (dbin, \ "expose locked from thread %p", \ g_thread_self ()); \ } G_STMT_END #define EXPOSE_UNLOCK(dbin) G_STMT_START { \ GST_LOG_OBJECT (dbin, \ "expose unlocking from thread %p", \ g_thread_self ()); \ g_mutex_unlock (&GST_DECODE_BIN_CAST(dbin)->expose_lock); \ } G_STMT_END #define DYN_LOCK(dbin) G_STMT_START { \ GST_LOG_OBJECT (dbin, \ "dynlocking from thread %p", \ g_thread_self ()); \ g_mutex_lock (&GST_DECODE_BIN_CAST(dbin)->dyn_lock); \ GST_LOG_OBJECT (dbin, \ "dynlocked from thread %p", \ g_thread_self ()); \ } G_STMT_END #define DYN_UNLOCK(dbin) G_STMT_START { \ GST_LOG_OBJECT (dbin, \ "dynunlocking from thread %p", \ g_thread_self ()); \ g_mutex_unlock (&GST_DECODE_BIN_CAST(dbin)->dyn_lock); \ } G_STMT_END #define SUBTITLE_LOCK(dbin) G_STMT_START { \ GST_LOG_OBJECT (dbin, \ "subtitle locking from thread %p", \ g_thread_self ()); \ g_mutex_lock (&GST_DECODE_BIN_CAST(dbin)->subtitle_lock); \ GST_LOG_OBJECT (dbin, \ "subtitle lock from thread %p", \ g_thread_self ()); \ } G_STMT_END #define SUBTITLE_UNLOCK(dbin) G_STMT_START { \ GST_LOG_OBJECT (dbin, \ "subtitle unlocking from thread %p", \ g_thread_self ()); \ g_mutex_unlock (&GST_DECODE_BIN_CAST(dbin)->subtitle_lock); \ } G_STMT_END #define BUFFERING_LOCK(dbin) G_STMT_START { \ GST_LOG_OBJECT (dbin, \ "buffering locking from thread %p", \ g_thread_self ()); \ g_mutex_lock (&GST_DECODE_BIN_CAST(dbin)->buffering_lock); \ GST_LOG_OBJECT (dbin, \ "buffering lock from thread %p", \ g_thread_self ()); \ } G_STMT_END #define BUFFERING_UNLOCK(dbin) G_STMT_START { \ GST_LOG_OBJECT (dbin, \ "buffering unlocking from thread %p", \ g_thread_self ()); \ g_mutex_unlock (&GST_DECODE_BIN_CAST(dbin)->buffering_lock); \ } G_STMT_END struct _GstPendingPad { GstPad *pad; GstDecodeChain *chain; gulong event_probe_id; gulong notify_caps_id; }; struct _GstDecodeElement { GstElement *element; GstElement *capsfilter; /* Optional capsfilter for Parser/Convert */ gulong pad_added_id; gulong pad_removed_id; gulong no_more_pads_id; }; /* GstDecodeGroup * * Streams belonging to the same group/chain of a media file * * When changing something here lock the parent chain! */ struct _GstDecodeGroup { GstDecodeBin *dbin; GstDecodeChain *parent; GstElement *multiqueue; /* Used for linking all child chains */ gulong overrunsig; /* the overrun signal for multiqueue */ gboolean overrun; /* TRUE if the multiqueue signaled overrun. This * means that we should really expose the group */ gboolean no_more_pads; /* TRUE if the demuxer signaled no-more-pads */ gboolean drained; /* TRUE if the all children are drained */ GList *children; /* List of GstDecodeChains in this group */ GList *reqpads; /* List of RequestPads for multiqueue, there is * exactly one RequestPad per child chain */ }; struct _GstDecodeChain { GstDecodeGroup *parent; GstDecodeBin *dbin; gint refs; /* Number of references to this object */ GMutex lock; /* Protects this chain and its groups */ GstPad *pad; /* srcpad that caused creation of this chain */ gboolean drained; /* TRUE if the all children are drained */ gboolean demuxer; /* TRUE if elements->data is a demuxer */ gboolean adaptive_demuxer; /* TRUE if elements->data is an adaptive streaming demuxer */ gboolean seekable; /* TRUE if this chain ends on a demuxer and is seekable */ GList *elements; /* All elements in this group, first is the latest and most downstream element */ /* Note: there are only groups if the last element of this chain * is a demuxer, otherwise the chain will end with an endpad. * The other way around this means, that endpad only exists if this * chain doesn't end with a demuxer! */ GstDecodeGroup *active_group; /* Currently active group */ GList *next_groups; /* head is newest group, tail is next group. a new group will be created only if the head group had no-more-pads. If it's only exposed all new pads will be ignored! */ GList *pending_pads; /* Pads that have no fixed caps yet */ GstDecodePad *current_pad; /* Current ending pad of the chain that can't * be exposed yet but would be the same as endpad * once it can be exposed */ GstDecodePad *endpad; /* Pad of this chain that could be exposed */ gboolean deadend; /* This chain is incomplete and can't be completed, e.g. no suitable decoder could be found e.g. stream got EOS without buffers */ gchar *deadend_details; GstCaps *endcaps; /* Caps that were used when linking to the endpad or that resulted in the deadend */ /* FIXME: This should be done directly via a thread! */ GList *old_groups; /* Groups that should be freed later */ }; static GstDecodeChain *gst_decode_chain_ref (GstDecodeChain * chain); static void gst_decode_chain_unref (GstDecodeChain * chain); static void gst_decode_chain_free (GstDecodeChain * chain); static GstDecodeChain *gst_decode_chain_new (GstDecodeBin * dbin, GstDecodeGroup * group, GstPad * pad); static void gst_decode_group_hide (GstDecodeGroup * group); static void gst_decode_group_free (GstDecodeGroup * group); static GstDecodeGroup *gst_decode_group_new (GstDecodeBin * dbin, GstDecodeChain * chain); static gboolean gst_decode_chain_is_complete (GstDecodeChain * chain); static gboolean gst_decode_chain_expose (GstDecodeChain * chain, GList ** endpads, gboolean * missing_plugin, GString * missing_plugin_details, gboolean * last_group); static gboolean gst_decode_chain_is_drained (GstDecodeChain * chain); static gboolean gst_decode_chain_reset_buffering (GstDecodeChain * chain); static gboolean gst_decode_group_is_complete (GstDecodeGroup * group); static GstPad *gst_decode_group_control_demuxer_pad (GstDecodeGroup * group, GstPad * pad); static gboolean gst_decode_group_is_drained (GstDecodeGroup * group); static gboolean gst_decode_group_reset_buffering (GstDecodeGroup * group); static gboolean gst_decode_bin_expose (GstDecodeBin * dbin); static void gst_decode_bin_reset_buffering (GstDecodeBin * dbin); #define CHAIN_MUTEX_LOCK(chain) G_STMT_START { \ GST_LOG_OBJECT (chain->dbin, \ "locking chain %p from thread %p", \ chain, g_thread_self ()); \ g_mutex_lock (&chain->lock); \ GST_LOG_OBJECT (chain->dbin, \ "locked chain %p from thread %p", \ chain, g_thread_self ()); \ } G_STMT_END #define CHAIN_MUTEX_UNLOCK(chain) G_STMT_START { \ GST_LOG_OBJECT (chain->dbin, \ "unlocking chain %p from thread %p", \ chain, g_thread_self ()); \ g_mutex_unlock (&chain->lock); \ } G_STMT_END /* GstDecodePad * * GstPad private used for source pads of chains */ struct _GstDecodePad { GstGhostPad parent; GstDecodeBin *dbin; GstDecodeChain *chain; gboolean blocked; /* the *target* pad is blocked */ gboolean exposed; /* the pad is exposed */ gboolean drained; /* an EOS has been seen on the pad */ gulong block_id; }; GType gst_decode_pad_get_type (void); G_DEFINE_TYPE (GstDecodePad, gst_decode_pad, GST_TYPE_GHOST_PAD); #define GST_TYPE_DECODE_PAD (gst_decode_pad_get_type ()) #define GST_DECODE_PAD(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj),GST_TYPE_DECODE_PAD,GstDecodePad)) static GstDecodePad *gst_decode_pad_new (GstDecodeBin * dbin, GstDecodeChain * chain); static void gst_decode_pad_activate (GstDecodePad * dpad, GstDecodeChain * chain); static void gst_decode_pad_unblock (GstDecodePad * dpad); static void gst_decode_pad_set_blocked (GstDecodePad * dpad, gboolean blocked); static gboolean gst_decode_pad_query (GstPad * pad, GstObject * parent, GstQuery * query); static void gst_pending_pad_free (GstPendingPad * ppad); static GstPadProbeReturn pad_event_cb (GstPad * pad, GstPadProbeInfo * info, gpointer data); /******************************** * Standard GObject boilerplate * ********************************/ static void gst_decode_bin_class_init (GstDecodeBinClass * klass); static void gst_decode_bin_init (GstDecodeBin * decode_bin); static void gst_decode_bin_dispose (GObject * object); static void gst_decode_bin_finalize (GObject * object); static GType gst_decode_bin_get_type (void) { static GType gst_decode_bin_type = 0; if (!gst_decode_bin_type) { static const GTypeInfo gst_decode_bin_info = { sizeof (GstDecodeBinClass), NULL, NULL, (GClassInitFunc) gst_decode_bin_class_init, NULL, NULL, sizeof (GstDecodeBin), 0, (GInstanceInitFunc) gst_decode_bin_init, NULL }; gst_decode_bin_type = g_type_register_static (GST_TYPE_BIN, "GstDecodeBin", &gst_decode_bin_info, 0); } return gst_decode_bin_type; } static gboolean _gst_boolean_accumulator (GSignalInvocationHint * ihint, GValue * return_accu, const GValue * handler_return, gpointer dummy) { gboolean myboolean; myboolean = g_value_get_boolean (handler_return); if (!(ihint->run_type & G_SIGNAL_RUN_CLEANUP)) g_value_set_boolean (return_accu, myboolean); /* stop emission if FALSE */ return myboolean; } static gboolean _gst_boolean_or_accumulator (GSignalInvocationHint * ihint, GValue * return_accu, const GValue * handler_return, gpointer dummy) { gboolean myboolean; gboolean retboolean; myboolean = g_value_get_boolean (handler_return); retboolean = g_value_get_boolean (return_accu); if (!(ihint->run_type & G_SIGNAL_RUN_CLEANUP)) g_value_set_boolean (return_accu, myboolean || retboolean); return TRUE; } /* we collect the first result */ static gboolean _gst_array_accumulator (GSignalInvocationHint * ihint, GValue * return_accu, const GValue * handler_return, gpointer dummy) { gpointer array; array = g_value_get_boxed (handler_return); if (!(ihint->run_type & G_SIGNAL_RUN_CLEANUP)) g_value_set_boxed (return_accu, array); return FALSE; } static gboolean _gst_select_accumulator (GSignalInvocationHint * ihint, GValue * return_accu, const GValue * handler_return, gpointer dummy) { GstAutoplugSelectResult res; res = g_value_get_enum (handler_return); if (!(ihint->run_type & G_SIGNAL_RUN_CLEANUP)) g_value_set_enum (return_accu, res); /* Call the next handler in the chain (if any) when the current callback * returns TRY. This makes it possible to register separate autoplug-select * handlers that implement different TRY/EXPOSE/SKIP strategies. */ if (res == GST_AUTOPLUG_SELECT_TRY) return TRUE; return FALSE; } static gboolean _gst_array_hasvalue_accumulator (GSignalInvocationHint * ihint, GValue * return_accu, const GValue * handler_return, gpointer dummy) { gpointer array; array = g_value_get_boxed (handler_return); if (!(ihint->run_type & G_SIGNAL_RUN_CLEANUP)) g_value_set_boxed (return_accu, array); if (array != NULL) return FALSE; return TRUE; } static void gst_decode_bin_class_init (GstDecodeBinClass * klass) { GObjectClass *gobject_klass; GstElementClass *gstelement_klass; GstBinClass *gstbin_klass; gobject_klass = (GObjectClass *) klass; gstelement_klass = (GstElementClass *) klass; gstbin_klass = (GstBinClass *) klass; parent_class = g_type_class_peek_parent (klass); gobject_klass->dispose = gst_decode_bin_dispose; gobject_klass->finalize = gst_decode_bin_finalize; gobject_klass->set_property = gst_decode_bin_set_property; gobject_klass->get_property = gst_decode_bin_get_property; /** * GstDecodeBin::unknown-type: * @bin: The decodebin. * @pad: The new pad containing caps that cannot be resolved to a 'final' * stream type. * @caps: The #GstCaps of the pad that cannot be resolved. * * This signal is emitted when a pad for which there is no further possible * decoding is added to the decodebin. */ gst_decode_bin_signals[SIGNAL_UNKNOWN_TYPE] = g_signal_new ("unknown-type", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstDecodeBinClass, unknown_type), NULL, NULL, g_cclosure_marshal_generic, G_TYPE_NONE, 2, GST_TYPE_PAD, GST_TYPE_CAPS); /** * GstDecodeBin::autoplug-continue: * @bin: The decodebin. * @pad: The #GstPad. * @caps: The #GstCaps found. * * This signal is emitted whenever decodebin finds a new stream. It is * emitted before looking for any elements that can handle that stream. * * * Invocation of signal handlers stops after the first signal handler * returns #FALSE. Signal handlers are invoked in the order they were * connected in. * * * Returns: #TRUE if you wish decodebin to look for elements that can * handle the given @caps. If #FALSE, those caps will be considered as * final and the pad will be exposed as such (see 'pad-added' signal of * #GstElement). */ gst_decode_bin_signals[SIGNAL_AUTOPLUG_CONTINUE] = g_signal_new ("autoplug-continue", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstDecodeBinClass, autoplug_continue), _gst_boolean_accumulator, NULL, g_cclosure_marshal_generic, G_TYPE_BOOLEAN, 2, GST_TYPE_PAD, GST_TYPE_CAPS); /** * GstDecodeBin::autoplug-factories: * @bin: The decodebin. * @pad: The #GstPad. * @caps: The #GstCaps found. * * This function is emited when an array of possible factories for @caps on * @pad is needed. Decodebin will by default return an array with all * compatible factories, sorted by rank. * * If this function returns NULL, @pad will be exposed as a final caps. * * If this function returns an empty array, the pad will be considered as * having an unhandled type media type. * * * Only the signal handler that is connected first will ever by invoked. * Don't connect signal handlers with the #G_CONNECT_AFTER flag to this * signal, they will never be invoked! * * * Returns: a #GValueArray* with a list of factories to try. The factories are * by default tried in the returned order or based on the index returned by * "autoplug-select". */ gst_decode_bin_signals[SIGNAL_AUTOPLUG_FACTORIES] = g_signal_new ("autoplug-factories", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstDecodeBinClass, autoplug_factories), _gst_array_accumulator, NULL, g_cclosure_marshal_generic, G_TYPE_VALUE_ARRAY, 2, GST_TYPE_PAD, GST_TYPE_CAPS); /** * GstDecodeBin::autoplug-sort: * @bin: The decodebin. * @pad: The #GstPad. * @caps: The #GstCaps. * @factories: A #GValueArray of possible #GstElementFactory to use. * * Once decodebin has found the possible #GstElementFactory objects to try * for @caps on @pad, this signal is emited. The purpose of the signal is for * the application to perform additional sorting or filtering on the element * factory array. * * The callee should copy and modify @factories or return #NULL if the * order should not change. * * * Invocation of signal handlers stops after one signal handler has * returned something else than #NULL. Signal handlers are invoked in * the order they were connected in. * Don't connect signal handlers with the #G_CONNECT_AFTER flag to this * signal, they will never be invoked! * * * Returns: A new sorted array of #GstElementFactory objects. */ gst_decode_bin_signals[SIGNAL_AUTOPLUG_SORT] = g_signal_new ("autoplug-sort", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstDecodeBinClass, autoplug_sort), _gst_array_hasvalue_accumulator, NULL, g_cclosure_marshal_generic, G_TYPE_VALUE_ARRAY, 3, GST_TYPE_PAD, GST_TYPE_CAPS, G_TYPE_VALUE_ARRAY | G_SIGNAL_TYPE_STATIC_SCOPE); /** * GstDecodeBin::autoplug-select: * @bin: The decodebin. * @pad: The #GstPad. * @caps: The #GstCaps. * @factory: A #GstElementFactory to use. * * This signal is emitted once decodebin has found all the possible * #GstElementFactory that can be used to handle the given @caps. For each of * those factories, this signal is emitted. * * The signal handler should return a #GST_TYPE_AUTOPLUG_SELECT_RESULT enum * value indicating what decodebin should do next. * * A value of #GST_AUTOPLUG_SELECT_TRY will try to autoplug an element from * @factory. * * A value of #GST_AUTOPLUG_SELECT_EXPOSE will expose @pad without plugging * any element to it. * * A value of #GST_AUTOPLUG_SELECT_SKIP will skip @factory and move to the * next factory. * * * The signal handler will not be invoked if any of the previously * registered signal handlers (if any) return a value other than * GST_AUTOPLUG_SELECT_TRY. Which also means that if you return * GST_AUTOPLUG_SELECT_TRY from one signal handler, handlers that get * registered next (again, if any) can override that decision. * * * Returns: a #GST_TYPE_AUTOPLUG_SELECT_RESULT that indicates the required * operation. the default handler will always return * #GST_AUTOPLUG_SELECT_TRY. */ gst_decode_bin_signals[SIGNAL_AUTOPLUG_SELECT] = g_signal_new ("autoplug-select", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstDecodeBinClass, autoplug_select), _gst_select_accumulator, NULL, g_cclosure_marshal_generic, GST_TYPE_AUTOPLUG_SELECT_RESULT, 3, GST_TYPE_PAD, GST_TYPE_CAPS, GST_TYPE_ELEMENT_FACTORY); /** * GstDecodeBin::autoplug-query: * @bin: The decodebin. * @pad: The #GstPad. * @child: The child element doing the query * @query: The #GstQuery. * * This signal is emitted whenever an autoplugged element that is * not linked downstream yet and not exposed does a query. It can * be used to tell the element about the downstream supported caps * for example. * * Returns: #TRUE if the query was handled, #FALSE otherwise. */ gst_decode_bin_signals[SIGNAL_AUTOPLUG_QUERY] = g_signal_new ("autoplug-query", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstDecodeBinClass, autoplug_query), _gst_boolean_or_accumulator, NULL, g_cclosure_marshal_generic, G_TYPE_BOOLEAN, 3, GST_TYPE_PAD, GST_TYPE_ELEMENT, GST_TYPE_QUERY | G_SIGNAL_TYPE_STATIC_SCOPE); /** * GstDecodeBin::drained * @bin: The decodebin * * This signal is emitted once decodebin has finished decoding all the data. */ gst_decode_bin_signals[SIGNAL_DRAINED] = g_signal_new ("drained", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstDecodeBinClass, drained), NULL, NULL, g_cclosure_marshal_generic, G_TYPE_NONE, 0, G_TYPE_NONE); g_object_class_install_property (gobject_klass, PROP_CAPS, g_param_spec_boxed ("caps", "Caps", "The caps on which to stop decoding.", GST_TYPE_CAPS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_klass, PROP_SUBTITLE_ENCODING, g_param_spec_string ("subtitle-encoding", "subtitle encoding", "Encoding to assume if input subtitles are not in UTF-8 encoding. " "If not set, the GST_SUBTITLE_ENCODING environment variable will " "be checked for an encoding to use. If that is not set either, " "ISO-8859-15 will be assumed.", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_klass, PROP_SINK_CAPS, g_param_spec_boxed ("sink-caps", "Sink Caps", "The caps of the input data. (NULL = use typefind element)", GST_TYPE_CAPS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin::use-buffering * * Activate buffering in decodebin. This will instruct the multiqueues behind * decoders to emit BUFFERING messages. */ g_object_class_install_property (gobject_klass, PROP_USE_BUFFERING, g_param_spec_boolean ("use-buffering", "Use Buffering", "Emit GST_MESSAGE_BUFFERING based on low-/high-percent thresholds", DEFAULT_USE_BUFFERING, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin:low-percent * * Low threshold percent for buffering to start. */ g_object_class_install_property (gobject_klass, PROP_LOW_PERCENT, g_param_spec_int ("low-percent", "Low percent", "Low threshold for buffering to start", 0, 100, DEFAULT_LOW_PERCENT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin:high-percent * * High threshold percent for buffering to finish. */ g_object_class_install_property (gobject_klass, PROP_HIGH_PERCENT, g_param_spec_int ("high-percent", "High percent", "High threshold for buffering to finish", 0, 100, DEFAULT_HIGH_PERCENT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin:max-size-bytes * * Max amount of bytes in the queue (0=automatic). */ g_object_class_install_property (gobject_klass, PROP_MAX_SIZE_BYTES, g_param_spec_uint ("max-size-bytes", "Max. size (bytes)", "Max. amount of bytes in the queue (0=automatic)", 0, G_MAXUINT, DEFAULT_MAX_SIZE_BYTES, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin:max-size-buffers * * Max amount of buffers in the queue (0=automatic). */ g_object_class_install_property (gobject_klass, PROP_MAX_SIZE_BUFFERS, g_param_spec_uint ("max-size-buffers", "Max. size (buffers)", "Max. number of buffers in the queue (0=automatic)", 0, G_MAXUINT, DEFAULT_MAX_SIZE_BUFFERS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin:max-size-time * * Max amount of time in the queue (in ns, 0=automatic). */ g_object_class_install_property (gobject_klass, PROP_MAX_SIZE_TIME, g_param_spec_uint64 ("max-size-time", "Max. size (ns)", "Max. amount of data in the queue (in ns, 0=automatic)", 0, G_MAXUINT64, DEFAULT_MAX_SIZE_TIME, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin::post-stream-topology * * Post stream-topology messages on the bus every time the topology changes. */ g_object_class_install_property (gobject_klass, PROP_POST_STREAM_TOPOLOGY, g_param_spec_boolean ("post-stream-topology", "Post Stream Topology", "Post stream-topology messages", DEFAULT_POST_STREAM_TOPOLOGY, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin::expose-all-streams * * Expose streams of unknown type. * * If set to %FALSE, then only the streams that can be decoded to the final * caps (see 'caps' property) will have a pad exposed. Streams that do not * match those caps but could have been decoded will not have decoder plugged * in internally and will not have a pad exposed. */ g_object_class_install_property (gobject_klass, PROP_EXPOSE_ALL_STREAMS, g_param_spec_boolean ("expose-all-streams", "Expose All Streams", "Expose all streams, including those of unknown type or that don't match the 'caps' property", DEFAULT_EXPOSE_ALL_STREAMS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstDecodeBin2::connection-speed * * Network connection speed in kbps (0 = unknownw) */ g_object_class_install_property (gobject_klass, PROP_CONNECTION_SPEED, g_param_spec_uint64 ("connection-speed", "Connection Speed", "Network connection speed in kbps (0 = unknown)", 0, G_MAXUINT64 / 1000, DEFAULT_CONNECTION_SPEED, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); klass->autoplug_continue = GST_DEBUG_FUNCPTR (gst_decode_bin_autoplug_continue); klass->autoplug_factories = GST_DEBUG_FUNCPTR (gst_decode_bin_autoplug_factories); klass->autoplug_sort = GST_DEBUG_FUNCPTR (gst_decode_bin_autoplug_sort); klass->autoplug_select = GST_DEBUG_FUNCPTR (gst_decode_bin_autoplug_select); klass->autoplug_query = GST_DEBUG_FUNCPTR (gst_decode_bin_autoplug_query); gst_element_class_add_pad_template (gstelement_klass, gst_static_pad_template_get (&decoder_bin_sink_template)); gst_element_class_add_pad_template (gstelement_klass, gst_static_pad_template_get (&decoder_bin_src_template)); gst_element_class_set_static_metadata (gstelement_klass, "Decoder Bin", "Generic/Bin/Decoder", "Autoplug and decode to raw media", "Edward Hervey , " "Sebastian Dröge "); gstelement_klass->change_state = GST_DEBUG_FUNCPTR (gst_decode_bin_change_state); gstbin_klass->handle_message = GST_DEBUG_FUNCPTR (gst_decode_bin_handle_message); gstbin_klass->remove_element = GST_DEBUG_FUNCPTR (gst_decode_bin_remove_element); g_type_class_ref (GST_TYPE_DECODE_PAD); } gint _decode_bin_compare_factories_func (gconstpointer p1, gconstpointer p2) { GstPluginFeature *f1, *f2; gboolean is_parser1, is_parser2; f1 = (GstPluginFeature *) p1; f2 = (GstPluginFeature *) p2; is_parser1 = gst_element_factory_list_is_type (GST_ELEMENT_FACTORY_CAST (f1), GST_ELEMENT_FACTORY_TYPE_PARSER); is_parser2 = gst_element_factory_list_is_type (GST_ELEMENT_FACTORY_CAST (f2), GST_ELEMENT_FACTORY_TYPE_PARSER); /* We want all parsers first as we always want to plug parsers * before decoders */ if (is_parser1 && !is_parser2) return -1; else if (!is_parser1 && is_parser2) return 1; /* And if it's a both a parser we first sort by rank * and then by factory name */ return gst_plugin_feature_rank_compare_func (p1, p2); } /* Must be called with factories lock! */ static void gst_decode_bin_update_factories_list (GstDecodeBin * dbin) { guint cookie; cookie = gst_registry_get_feature_list_cookie (gst_registry_get ()); if (!dbin->factories || dbin->factories_cookie != cookie) { if (dbin->factories) gst_plugin_feature_list_free (dbin->factories); dbin->factories = gst_element_factory_list_get_elements (GST_ELEMENT_FACTORY_TYPE_DECODABLE, GST_RANK_MARGINAL); dbin->factories = g_list_sort (dbin->factories, _decode_bin_compare_factories_func); dbin->factories_cookie = cookie; } } static void gst_decode_bin_init (GstDecodeBin * decode_bin) { /* first filter out the interesting element factories */ g_mutex_init (&decode_bin->factories_lock); /* we create the typefind element only once */ decode_bin->typefind = gst_element_factory_make ("typefind", "typefind"); if (!decode_bin->typefind) { g_warning ("can't find typefind element, decodebin will not work"); } else { GstPad *pad; GstPad *gpad; GstPadTemplate *pad_tmpl; /* add the typefind element */ if (!gst_bin_add (GST_BIN (decode_bin), decode_bin->typefind)) { g_warning ("Could not add typefind element, decodebin will not work"); gst_object_unref (decode_bin->typefind); decode_bin->typefind = NULL; } /* get the sinkpad */ pad = gst_element_get_static_pad (decode_bin->typefind, "sink"); /* get the pad template */ pad_tmpl = gst_static_pad_template_get (&decoder_bin_sink_template); /* ghost the sink pad to ourself */ gpad = gst_ghost_pad_new_from_template ("sink", pad, pad_tmpl); gst_pad_set_active (gpad, TRUE); gst_element_add_pad (GST_ELEMENT (decode_bin), gpad); gst_object_unref (pad_tmpl); gst_object_unref (pad); } g_mutex_init (&decode_bin->expose_lock); decode_bin->decode_chain = NULL; g_mutex_init (&decode_bin->dyn_lock); decode_bin->shutdown = FALSE; decode_bin->blocked_pads = NULL; g_mutex_init (&decode_bin->subtitle_lock); g_mutex_init (&decode_bin->buffering_lock); decode_bin->encoding = g_strdup (DEFAULT_SUBTITLE_ENCODING); decode_bin->caps = gst_static_caps_get (&default_raw_caps); decode_bin->use_buffering = DEFAULT_USE_BUFFERING; decode_bin->low_percent = DEFAULT_LOW_PERCENT; decode_bin->high_percent = DEFAULT_HIGH_PERCENT; decode_bin->max_size_bytes = DEFAULT_MAX_SIZE_BYTES; decode_bin->max_size_buffers = DEFAULT_MAX_SIZE_BUFFERS; decode_bin->max_size_time = DEFAULT_MAX_SIZE_TIME; decode_bin->expose_allstreams = DEFAULT_EXPOSE_ALL_STREAMS; decode_bin->connection_speed = DEFAULT_CONNECTION_SPEED; } static void gst_decode_bin_dispose (GObject * object) { GstDecodeBin *decode_bin; decode_bin = GST_DECODE_BIN (object); if (decode_bin->factories) gst_plugin_feature_list_free (decode_bin->factories); decode_bin->factories = NULL; if (decode_bin->decode_chain) gst_decode_chain_free (decode_bin->decode_chain); decode_bin->decode_chain = NULL; if (decode_bin->caps) gst_caps_unref (decode_bin->caps); decode_bin->caps = NULL; g_free (decode_bin->encoding); decode_bin->encoding = NULL; g_list_free (decode_bin->subtitles); decode_bin->subtitles = NULL; G_OBJECT_CLASS (parent_class)->dispose (object); } static void gst_decode_bin_finalize (GObject * object) { GstDecodeBin *decode_bin; decode_bin = GST_DECODE_BIN (object); g_mutex_clear (&decode_bin->expose_lock); g_mutex_clear (&decode_bin->dyn_lock); g_mutex_clear (&decode_bin->subtitle_lock); g_mutex_clear (&decode_bin->buffering_lock); g_mutex_clear (&decode_bin->factories_lock); G_OBJECT_CLASS (parent_class)->finalize (object); } /* _set_caps * Changes the caps on which decodebin will stop decoding. * Will unref the previously set one. The refcount of the given caps will be * increased. * @caps can be NULL. * * MT-safe */ static void gst_decode_bin_set_caps (GstDecodeBin * dbin, GstCaps * caps) { GST_DEBUG_OBJECT (dbin, "Setting new caps: %" GST_PTR_FORMAT, caps); GST_OBJECT_LOCK (dbin); gst_caps_replace (&dbin->caps, caps); GST_OBJECT_UNLOCK (dbin); } /* _get_caps * Returns the currently configured caps on which decodebin will stop decoding. * The returned caps (if not NULL), will have its refcount incremented. * * MT-safe */ static GstCaps * gst_decode_bin_get_caps (GstDecodeBin * dbin) { GstCaps *caps; GST_DEBUG_OBJECT (dbin, "Getting currently set caps"); GST_OBJECT_LOCK (dbin); caps = dbin->caps; if (caps) gst_caps_ref (caps); GST_OBJECT_UNLOCK (dbin); return caps; } static void gst_decode_bin_set_sink_caps (GstDecodeBin * dbin, GstCaps * caps) { GST_DEBUG_OBJECT (dbin, "Setting new caps: %" GST_PTR_FORMAT, caps); g_object_set (dbin->typefind, "force-caps", caps, NULL); } static GstCaps * gst_decode_bin_get_sink_caps (GstDecodeBin * dbin) { GstCaps *caps; GST_DEBUG_OBJECT (dbin, "Getting currently set caps"); g_object_get (dbin->typefind, "force-caps", &caps, NULL); return caps; } static void gst_decode_bin_set_subs_encoding (GstDecodeBin * dbin, const gchar * encoding) { GList *walk; GST_DEBUG_OBJECT (dbin, "Setting new encoding: %s", GST_STR_NULL (encoding)); SUBTITLE_LOCK (dbin); g_free (dbin->encoding); dbin->encoding = g_strdup (encoding); /* set the subtitle encoding on all added elements */ for (walk = dbin->subtitles; walk; walk = g_list_next (walk)) { g_object_set (G_OBJECT (walk->data), "subtitle-encoding", dbin->encoding, NULL); } SUBTITLE_UNLOCK (dbin); } static gchar * gst_decode_bin_get_subs_encoding (GstDecodeBin * dbin) { gchar *encoding; GST_DEBUG_OBJECT (dbin, "Getting currently set encoding"); SUBTITLE_LOCK (dbin); encoding = g_strdup (dbin->encoding); SUBTITLE_UNLOCK (dbin); return encoding; } static void gst_decode_bin_set_property (GObject * object, guint prop_id, const GValue * value, GParamSpec * pspec) { GstDecodeBin *dbin; dbin = GST_DECODE_BIN (object); switch (prop_id) { case PROP_CAPS: gst_decode_bin_set_caps (dbin, g_value_get_boxed (value)); break; case PROP_SUBTITLE_ENCODING: gst_decode_bin_set_subs_encoding (dbin, g_value_get_string (value)); break; case PROP_SINK_CAPS: gst_decode_bin_set_sink_caps (dbin, g_value_get_boxed (value)); break; case PROP_USE_BUFFERING: dbin->use_buffering = g_value_get_boolean (value); break; case PROP_LOW_PERCENT: dbin->low_percent = g_value_get_int (value); break; case PROP_HIGH_PERCENT: dbin->high_percent = g_value_get_int (value); break; case PROP_MAX_SIZE_BYTES: dbin->max_size_bytes = g_value_get_uint (value); break; case PROP_MAX_SIZE_BUFFERS: dbin->max_size_buffers = g_value_get_uint (value); break; case PROP_MAX_SIZE_TIME: dbin->max_size_time = g_value_get_uint64 (value); break; case PROP_POST_STREAM_TOPOLOGY: dbin->post_stream_topology = g_value_get_boolean (value); break; case PROP_EXPOSE_ALL_STREAMS: dbin->expose_allstreams = g_value_get_boolean (value); break; case PROP_CONNECTION_SPEED: GST_OBJECT_LOCK (dbin); dbin->connection_speed = g_value_get_uint64 (value) * 1000; GST_OBJECT_UNLOCK (dbin); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } static void gst_decode_bin_get_property (GObject * object, guint prop_id, GValue * value, GParamSpec * pspec) { GstDecodeBin *dbin; dbin = GST_DECODE_BIN (object); switch (prop_id) { case PROP_CAPS: g_value_take_boxed (value, gst_decode_bin_get_caps (dbin)); break; case PROP_SUBTITLE_ENCODING: g_value_take_string (value, gst_decode_bin_get_subs_encoding (dbin)); break; case PROP_SINK_CAPS: g_value_take_boxed (value, gst_decode_bin_get_sink_caps (dbin)); break; case PROP_USE_BUFFERING: g_value_set_boolean (value, dbin->use_buffering); break; case PROP_LOW_PERCENT: g_value_set_int (value, dbin->low_percent); break; case PROP_HIGH_PERCENT: g_value_set_int (value, dbin->high_percent); break; case PROP_MAX_SIZE_BYTES: g_value_set_uint (value, dbin->max_size_bytes); break; case PROP_MAX_SIZE_BUFFERS: g_value_set_uint (value, dbin->max_size_buffers); break; case PROP_MAX_SIZE_TIME: g_value_set_uint64 (value, dbin->max_size_time); break; case PROP_POST_STREAM_TOPOLOGY: g_value_set_boolean (value, dbin->post_stream_topology); break; case PROP_EXPOSE_ALL_STREAMS: g_value_set_boolean (value, dbin->expose_allstreams); break; case PROP_CONNECTION_SPEED: GST_OBJECT_LOCK (dbin); g_value_set_uint64 (value, dbin->connection_speed / 1000); GST_OBJECT_UNLOCK (dbin); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } /***** * Default autoplug signal handlers *****/ static gboolean gst_decode_bin_autoplug_continue (GstElement * element, GstPad * pad, GstCaps * caps) { GST_DEBUG_OBJECT (element, "autoplug-continue returns TRUE"); /* by default we always continue */ return TRUE; } static GValueArray * gst_decode_bin_autoplug_factories (GstElement * element, GstPad * pad, GstCaps * caps) { GList *list, *tmp; GValueArray *result; GstDecodeBin *dbin = GST_DECODE_BIN_CAST (element); GST_DEBUG_OBJECT (element, "finding factories"); /* return all compatible factories for caps */ g_mutex_lock (&dbin->factories_lock); gst_decode_bin_update_factories_list (dbin); list = gst_element_factory_list_filter (dbin->factories, caps, GST_PAD_SINK, gst_caps_is_fixed (caps)); g_mutex_unlock (&dbin->factories_lock); result = g_value_array_new (g_list_length (list)); for (tmp = list; tmp; tmp = tmp->next) { GstElementFactory *factory = GST_ELEMENT_FACTORY_CAST (tmp->data); GValue val = { 0, }; g_value_init (&val, G_TYPE_OBJECT); g_value_set_object (&val, factory); g_value_array_append (result, &val); g_value_unset (&val); } gst_plugin_feature_list_free (list); GST_DEBUG_OBJECT (element, "autoplug-factories returns %p", result); return result; } static GValueArray * gst_decode_bin_autoplug_sort (GstElement * element, GstPad * pad, GstCaps * caps, GValueArray * factories) { return NULL; } static GstAutoplugSelectResult gst_decode_bin_autoplug_select (GstElement * element, GstPad * pad, GstCaps * caps, GstElementFactory * factory) { GST_DEBUG_OBJECT (element, "default autoplug-select returns TRY"); /* Try factory. */ return GST_AUTOPLUG_SELECT_TRY; } static gboolean gst_decode_bin_autoplug_query (GstElement * element, GstPad * pad, GstQuery * query) { /* No query handled here */ return FALSE; } /******** * Discovery methods *****/ static gboolean are_final_caps (GstDecodeBin * dbin, GstCaps * caps); static gboolean is_demuxer_element (GstElement * srcelement); static gboolean is_adaptive_demuxer_element (GstElement * srcelement); static gboolean connect_pad (GstDecodeBin * dbin, GstElement * src, GstDecodePad * dpad, GstPad * pad, GstCaps * caps, GValueArray * factories, GstDecodeChain * chain, gchar ** deadend_details); static GList *connect_element (GstDecodeBin * dbin, GstDecodeElement * delem, GstDecodeChain * chain); static void expose_pad (GstDecodeBin * dbin, GstElement * src, GstDecodePad * dpad, GstPad * pad, GstCaps * caps, GstDecodeChain * chain); static void pad_added_cb (GstElement * element, GstPad * pad, GstDecodeChain * chain); static void pad_removed_cb (GstElement * element, GstPad * pad, GstDecodeChain * chain); static void no_more_pads_cb (GstElement * element, GstDecodeChain * chain); static GstDecodeGroup *gst_decode_chain_get_current_group (GstDecodeChain * chain); static gboolean clear_sticky_events (GstPad * pad, GstEvent ** event, gpointer user_data) { GST_DEBUG_OBJECT (pad, "clearing sticky event %" GST_PTR_FORMAT, *event); gst_event_unref (*event); *event = NULL; return TRUE; } static gboolean copy_sticky_events (GstPad * pad, GstEvent ** event, gpointer user_data) { GstPad *gpad = GST_PAD_CAST (user_data); GST_DEBUG_OBJECT (gpad, "store sticky event %" GST_PTR_FORMAT, *event); gst_pad_store_sticky_event (gpad, *event); return TRUE; } static void decode_pad_set_target (GstDecodePad * dpad, GstPad * target) { gst_ghost_pad_set_target (GST_GHOST_PAD_CAST (dpad), target); if (target == NULL) gst_pad_sticky_events_foreach (GST_PAD_CAST (dpad), clear_sticky_events, NULL); else gst_pad_sticky_events_foreach (target, copy_sticky_events, dpad); } /* called when a new pad is discovered. It will perform some basic actions * before trying to link something to it. * * - Check the caps, don't do anything when there are no caps or when they have * no good type. * - signal AUTOPLUG_CONTINUE to check if we need to continue autoplugging this * pad. * - if the caps are non-fixed, setup a handler to continue autoplugging when * the caps become fixed (connect to notify::caps). * - get list of factories to autoplug. * - continue autoplugging to one of the factories. */ /* returns whether to expose the pad */ static gboolean analyze_new_pad (GstDecodeBin * dbin, GstElement * src, GstPad * pad, GstCaps * caps, GstDecodeChain * chain, GstDecodeChain ** new_chain) { gboolean apcontinue = TRUE; GValueArray *factories = NULL, *result = NULL; GstDecodePad *dpad; GstElementFactory *factory; const gchar *classification; gboolean is_parser_converter = FALSE; gboolean res; gchar *deadend_details = NULL; GST_DEBUG_OBJECT (dbin, "Pad %s:%s caps:%" GST_PTR_FORMAT, GST_DEBUG_PAD_NAME (pad), caps); if (new_chain) *new_chain = chain; if (chain->elements && src != ((GstDecodeElement *) chain->elements->data)->element && src != ((GstDecodeElement *) chain->elements->data)->capsfilter) { GST_ERROR_OBJECT (dbin, "New pad from not the last element in this chain"); return FALSE; } if (chain->endpad) { GST_ERROR_OBJECT (dbin, "New pad in a chain that is already complete"); return FALSE; } if (chain->demuxer) { GstDecodeGroup *group; GstDecodeChain *oldchain = chain; GstDecodeElement *demux = (chain->elements ? chain->elements->data : NULL); if (chain->current_pad) gst_object_unref (chain->current_pad); chain->current_pad = NULL; /* we are adding a new pad for a demuxer (see is_demuxer_element(), * start a new chain for it */ CHAIN_MUTEX_LOCK (oldchain); group = gst_decode_chain_get_current_group (chain); if (group && !g_list_find (group->children, chain)) { g_assert (new_chain != NULL); *new_chain = chain = gst_decode_chain_new (dbin, group, pad); group->children = g_list_prepend (group->children, chain); } CHAIN_MUTEX_UNLOCK (oldchain); if (!group) { GST_WARNING_OBJECT (dbin, "No current group"); return FALSE; } /* If this is not a dynamic pad demuxer, we're no-more-pads * already before anything else happens */ if (demux == NULL || !demux->no_more_pads_id) group->no_more_pads = TRUE; } /* From here on we own a reference to the caps as * we might create new caps below and would need * to unref them later */ if (caps) gst_caps_ref (caps); if ((caps == NULL) || gst_caps_is_empty (caps)) goto unknown_type; if (gst_caps_is_any (caps)) goto any_caps; if (!chain->current_pad) chain->current_pad = gst_decode_pad_new (dbin, chain); dpad = gst_object_ref (chain->current_pad); gst_pad_set_active (GST_PAD_CAST (dpad), TRUE); decode_pad_set_target (dpad, pad); /* 1. Emit 'autoplug-continue' the result will tell us if this pads needs * further autoplugging. Only do this for fixed caps, for unfixed caps * we will later come here again from the notify::caps handler. The * problem with unfixed caps is that, we can't reliably tell if the output * is e.g. accepted by a sink because only parts of the possible final * caps might be accepted by the sink. */ if (gst_caps_is_fixed (caps)) g_signal_emit (G_OBJECT (dbin), gst_decode_bin_signals[SIGNAL_AUTOPLUG_CONTINUE], 0, dpad, caps, &apcontinue); else apcontinue = TRUE; /* 1.a if autoplug-continue is FALSE or caps is a raw format, goto pad_is_final */ if ((!apcontinue) || are_final_caps (dbin, caps)) goto expose_pad; /* 1.b For Parser/Converter that can output different stream formats * we insert a capsfilter with the sorted caps of all possible next * elements and continue with the capsfilter srcpad */ factory = gst_element_get_factory (src); classification = gst_element_factory_get_metadata (factory, GST_ELEMENT_METADATA_KLASS); is_parser_converter = (strstr (classification, "Parser") && strstr (classification, "Converter")); /* 1.c when the caps are not fixed yet, we can't be sure what element to * connect. We delay autoplugging until the caps are fixed */ if (!is_parser_converter && !gst_caps_is_fixed (caps)) { goto non_fixed; } else if (!is_parser_converter) { gst_caps_unref (caps); caps = gst_pad_get_current_caps (pad); if (!caps) { GST_DEBUG_OBJECT (dbin, "No final caps set yet, delaying autoplugging"); gst_object_unref (dpad); goto setup_caps_delay; } } /* 1.d else get the factories and if there's no compatible factory goto * unknown_type */ g_signal_emit (G_OBJECT (dbin), gst_decode_bin_signals[SIGNAL_AUTOPLUG_FACTORIES], 0, dpad, caps, &factories); /* NULL means that we can expose the pad */ if (factories == NULL) goto expose_pad; /* if the array is empty, we have a type for which we have no decoder */ if (factories->n_values == 0) { if (!dbin->expose_allstreams) { GstCaps *raw = gst_static_caps_get (&default_raw_caps); /* If the caps are raw, this just means we don't want to expose them */ if (gst_caps_is_subset (caps, raw)) { g_value_array_free (factories); gst_caps_unref (raw); gst_object_unref (dpad); goto discarded_type; } gst_caps_unref (raw); } /* if not we have a unhandled type with no compatible factories */ g_value_array_free (factories); gst_object_unref (dpad); goto unknown_type; } /* 1.e sort some more. */ g_signal_emit (G_OBJECT (dbin), gst_decode_bin_signals[SIGNAL_AUTOPLUG_SORT], 0, dpad, caps, factories, &result); if (result) { g_value_array_free (factories); factories = result; } /* At this point we have a potential decoder, but we might not need it * if it doesn't match the output caps */ if (!dbin->expose_allstreams && gst_caps_is_fixed (caps)) { guint i; const GList *tmps; gboolean dontuse = FALSE; GST_DEBUG ("Checking if we can abort early"); /* 1.f Do an early check to see if the candidates are potential decoders, but * due to the fact that they decode to a mediatype that is not final we don't * need them */ for (i = 0; i < factories->n_values && !dontuse; i++) { GstElementFactory *factory = g_value_get_object (g_value_array_get_nth (factories, i)); GstCaps *tcaps; /* We are only interested in skipping decoders */ if (strstr (gst_element_factory_get_metadata (factory, GST_ELEMENT_METADATA_KLASS), "Decoder")) { GST_DEBUG ("Trying factory %s", gst_plugin_feature_get_name (GST_PLUGIN_FEATURE (factory))); /* Check the source pad template caps to see if they match raw caps but don't match * our final caps*/ for (tmps = gst_element_factory_get_static_pad_templates (factory); tmps && !dontuse; tmps = tmps->next) { GstStaticPadTemplate *st = (GstStaticPadTemplate *) tmps->data; if (st->direction != GST_PAD_SRC) continue; tcaps = gst_static_pad_template_get_caps (st); apcontinue = TRUE; /* Emit autoplug-continue to see if the caps are considered to be raw caps */ g_signal_emit (G_OBJECT (dbin), gst_decode_bin_signals[SIGNAL_AUTOPLUG_CONTINUE], 0, dpad, tcaps, &apcontinue); /* If autoplug-continue returns TRUE and the caps are not final, don't use them */ if (apcontinue && !are_final_caps (dbin, tcaps)) dontuse = TRUE; gst_caps_unref (tcaps); } } } if (dontuse) { gst_object_unref (dpad); g_value_array_free (factories); goto discarded_type; } } /* 1.g now get the factory template caps and insert the capsfilter if this * is a parser/converter */ if (is_parser_converter) { GstCaps *filter_caps; gint i; GstPad *p; GstDecodeElement *delem; g_assert (chain->elements != NULL); delem = (GstDecodeElement *) chain->elements->data; filter_caps = gst_caps_new_empty (); for (i = 0; i < factories->n_values; i++) { GstElementFactory *factory = g_value_get_object (g_value_array_get_nth (factories, i)); GstCaps *tcaps, *intersection; const GList *tmps; GST_DEBUG ("Trying factory %s", gst_plugin_feature_get_name (GST_PLUGIN_FEATURE (factory))); if (gst_element_get_factory (src) == factory || gst_element_factory_list_is_type (factory, GST_ELEMENT_FACTORY_TYPE_PARSER)) { GST_DEBUG ("Skipping factory"); continue; } for (tmps = gst_element_factory_get_static_pad_templates (factory); tmps; tmps = tmps->next) { GstStaticPadTemplate *st = (GstStaticPadTemplate *) tmps->data; if (st->direction != GST_PAD_SINK || st->presence != GST_PAD_ALWAYS) continue; tcaps = gst_static_pad_template_get_caps (st); intersection = gst_caps_intersect_full (tcaps, caps, GST_CAPS_INTERSECT_FIRST); filter_caps = gst_caps_merge (filter_caps, intersection); gst_caps_unref (tcaps); } } /* Append the parser caps to prevent any not-negotiated errors */ filter_caps = gst_caps_merge (filter_caps, gst_caps_ref (caps)); delem->capsfilter = gst_element_factory_make ("capsfilter", NULL); g_object_set (G_OBJECT (delem->capsfilter), "caps", filter_caps, NULL); gst_caps_unref (filter_caps); gst_element_set_state (delem->capsfilter, GST_STATE_PAUSED); gst_bin_add (GST_BIN_CAST (dbin), gst_object_ref (delem->capsfilter)); decode_pad_set_target (dpad, NULL); p = gst_element_get_static_pad (delem->capsfilter, "sink"); gst_pad_link_full (pad, p, GST_PAD_LINK_CHECK_NOTHING); gst_object_unref (p); p = gst_element_get_static_pad (delem->capsfilter, "src"); decode_pad_set_target (dpad, p); pad = p; gst_caps_unref (caps); caps = gst_pad_get_current_caps (pad); if (!caps) { GST_DEBUG_OBJECT (dbin, "No final caps set yet, delaying autoplugging"); gst_object_unref (dpad); g_value_array_free (factories); goto setup_caps_delay; } } /* 1.h else continue autoplugging something from the list. */ GST_LOG_OBJECT (pad, "Let's continue discovery on this pad"); res = connect_pad (dbin, src, dpad, pad, caps, factories, chain, &deadend_details); /* Need to unref the capsfilter srcpad here if * we inserted a capsfilter */ if (is_parser_converter) gst_object_unref (pad); gst_object_unref (dpad); g_value_array_free (factories); if (!res) goto unknown_type; gst_caps_unref (caps); return FALSE; expose_pad: { GST_LOG_OBJECT (dbin, "Pad is final and should expose the pad. " "autoplug-continue:%d", apcontinue); gst_object_unref (dpad); gst_caps_unref (caps); return TRUE; } discarded_type: { GST_LOG_OBJECT (pad, "Known type, but discarded because not final caps"); chain->deadend = TRUE; chain->endcaps = caps; gst_object_replace ((GstObject **) & chain->current_pad, NULL); /* Try to expose anything */ EXPOSE_LOCK (dbin); if (dbin->decode_chain) { if (gst_decode_chain_is_complete (dbin->decode_chain)) { gst_decode_bin_expose (dbin); } } EXPOSE_UNLOCK (dbin); do_async_done (dbin); return FALSE; } unknown_type: { GST_LOG_OBJECT (pad, "Unknown type, posting message and firing signal"); chain->deadend_details = deadend_details; chain->deadend = TRUE; chain->endcaps = caps; gst_object_replace ((GstObject **) & chain->current_pad, NULL); gst_element_post_message (GST_ELEMENT_CAST (dbin), gst_missing_decoder_message_new (GST_ELEMENT_CAST (dbin), caps)); g_signal_emit (G_OBJECT (dbin), gst_decode_bin_signals[SIGNAL_UNKNOWN_TYPE], 0, pad, caps); /* Try to expose anything */ EXPOSE_LOCK (dbin); if (dbin->decode_chain) { if (gst_decode_chain_is_complete (dbin->decode_chain)) { gst_decode_bin_expose (dbin); } } EXPOSE_UNLOCK (dbin); if (src == dbin->typefind) { if (!caps || gst_caps_is_empty (caps)) { GST_ELEMENT_ERROR (dbin, STREAM, TYPE_NOT_FOUND, (_("Could not determine type of stream")), (NULL)); } do_async_done (dbin); } return FALSE; } non_fixed: { GST_DEBUG_OBJECT (pad, "pad has non-fixed caps delay autoplugging"); gst_object_unref (dpad); goto setup_caps_delay; } any_caps: { GST_DEBUG_OBJECT (pad, "pad has ANY caps, delaying auto-pluggin"); goto setup_caps_delay; } setup_caps_delay: { GstPendingPad *ppad; /* connect to caps notification */ CHAIN_MUTEX_LOCK (chain); GST_LOG_OBJECT (dbin, "Chain %p has now %d dynamic pads", chain, g_list_length (chain->pending_pads)); ppad = g_slice_new0 (GstPendingPad); ppad->pad = gst_object_ref (pad); ppad->chain = chain; ppad->event_probe_id = gst_pad_add_probe (pad, GST_PAD_PROBE_TYPE_EVENT_DOWNSTREAM, pad_event_cb, ppad, NULL); chain->pending_pads = g_list_prepend (chain->pending_pads, ppad); ppad->notify_caps_id = g_signal_connect (pad, "notify::caps", G_CALLBACK (caps_notify_cb), chain); CHAIN_MUTEX_UNLOCK (chain); /* If we're here because we have a Parser/Converter * we have to unref the pad */ if (is_parser_converter) gst_object_unref (pad); if (caps) gst_caps_unref (caps); return FALSE; } } static void add_error_filter (GstDecodeBin * dbin, GstElement * element) { GST_OBJECT_LOCK (dbin); dbin->filtered = g_list_prepend (dbin->filtered, element); GST_OBJECT_UNLOCK (dbin); } static void remove_error_filter (GstDecodeBin * dbin, GstElement * element, GstMessage ** error) { GList *l; GST_OBJECT_LOCK (dbin); dbin->filtered = g_list_remove (dbin->filtered, element); if (error) *error = NULL; l = dbin->filtered_errors; while (l) { GstMessage *msg = l->data; if (GST_MESSAGE_SRC (msg) == GST_OBJECT_CAST (element)) { /* Get the last error of this element, i.e. the earliest */ if (error) gst_message_replace (error, msg); gst_message_unref (msg); l = dbin->filtered_errors = g_list_delete_link (dbin->filtered_errors, l); } else { l = l->next; } } GST_OBJECT_UNLOCK (dbin); } typedef struct { gboolean ret; GstPad *peer; } SendStickyEventsData; static gboolean send_sticky_event (GstPad * pad, GstEvent ** event, gpointer user_data) { SendStickyEventsData *data = user_data; gboolean ret; ret = gst_pad_send_event (data->peer, gst_event_ref (*event)); if (!ret) data->ret = FALSE; return data->ret; } static gboolean send_sticky_events (GstDecodeBin * dbin, GstPad * pad) { SendStickyEventsData data; data.ret = TRUE; data.peer = gst_pad_get_peer (pad); gst_pad_sticky_events_foreach (pad, send_sticky_event, &data); gst_object_unref (data.peer); return data.ret; } static gchar * error_message_to_string (GstMessage * msg) { GError *err; gchar *debug, *message, *full_message; gst_message_parse_error (msg, &err, &debug); message = gst_error_get_message (err->domain, err->code); if (debug) full_message = g_strdup_printf ("%s\n%s\n%s", message, err->message, debug); else full_message = g_strdup_printf ("%s\n%s", message, err->message); g_free (message); g_free (debug); g_clear_error (&err); return full_message; } static GstPadProbeReturn demuxer_source_pad_probe (GstPad * pad, GstPadProbeInfo * info, gpointer user_data) { GstEvent *event = GST_PAD_PROBE_INFO_EVENT (info); GstDecodeGroup *group = (GstDecodeGroup *) user_data; GstDecodeChain *parent_chain = group->parent; GST_DEBUG_OBJECT (pad, "Saw event %s", GST_EVENT_TYPE_NAME (event)); /* Check if we are the active group, if not we need to proxy the flush * events to the other groups (of which at least one is exposed, ensuring * flushing properly propagates downstream of decodebin */ if (parent_chain->active_group == group) return GST_PAD_PROBE_OK; switch (GST_EVENT_TYPE (event)) { case GST_EVENT_FLUSH_START: case GST_EVENT_FLUSH_STOP: { GList *tmp; GST_DEBUG_OBJECT (pad, "Proxying flush events to inactive groups"); /* Proxy to active group */ for (tmp = parent_chain->active_group->reqpads; tmp; tmp = tmp->next) { GstPad *reqpad = (GstPad *) tmp->data; gst_pad_send_event (reqpad, gst_event_ref (event)); } /* Proxy to other non-active groups (except ourself) */ for (tmp = parent_chain->next_groups; tmp; tmp = tmp->next) { GList *tmp2; GstDecodeGroup *tmpgroup = (GstDecodeGroup *) tmp->data; if (tmpgroup != group) { for (tmp2 = tmpgroup->reqpads; tmp2; tmp2 = tmp2->next) { GstPad *reqpad = (GstPad *) tmp2->data; gst_pad_send_event (reqpad, gst_event_ref (event)); } } } flush_chain (parent_chain, GST_EVENT_TYPE (event) == GST_EVENT_FLUSH_START); } break; default: break; } return GST_PAD_PROBE_OK; } typedef struct { GstDecodeChain *chain; GstPad *pad; } PadExposeData; /* connect_pad: * * Try to connect the given pad to an element created from one of the factories, * and recursively. * * Note that dpad is ghosting pad, and so pad is linked; be sure to unset dpad's * target before trying to link pad. * * Returns TRUE if an element was properly created and linked */ static gboolean connect_pad (GstDecodeBin * dbin, GstElement * src, GstDecodePad * dpad, GstPad * pad, GstCaps * caps, GValueArray * factories, GstDecodeChain * chain, gchar ** deadend_details) { gboolean res = FALSE; GstPad *mqpad = NULL; gboolean is_demuxer = chain->parent && !chain->elements; /* First pad after the demuxer */ GString *error_details = NULL; g_return_val_if_fail (factories != NULL, FALSE); g_return_val_if_fail (factories->n_values > 0, FALSE); GST_DEBUG_OBJECT (dbin, "pad %s:%s , chain:%p, %d factories, caps %" GST_PTR_FORMAT, GST_DEBUG_PAD_NAME (pad), chain, factories->n_values, caps); /* 1. is element demuxer or parser */ if (is_demuxer) { GST_LOG_OBJECT (src, "is a demuxer, connecting the pad through multiqueue '%s'", GST_OBJECT_NAME (chain->parent->multiqueue)); /* Set a flush-start/-stop probe on the downstream events */ gst_pad_add_probe (pad, GST_PAD_PROBE_TYPE_EVENT_FLUSH, demuxer_source_pad_probe, chain->parent, NULL); decode_pad_set_target (dpad, NULL); if (!(mqpad = gst_decode_group_control_demuxer_pad (chain->parent, pad))) goto beach; src = chain->parent->multiqueue; pad = mqpad; decode_pad_set_target (dpad, pad); } error_details = g_string_new (""); /* 2. Try to create an element and link to it */ while (factories->n_values > 0) { GstAutoplugSelectResult ret; GstElementFactory *factory; GstDecodeElement *delem; GstElement *element; GstPad *sinkpad; GParamSpec *pspec; gboolean subtitle; GList *to_connect = NULL; GList *to_expose = NULL; gboolean is_parser_converter = FALSE; /* Set dpad target to pad again, it might've been unset * below but we came back here because something failed */ decode_pad_set_target (dpad, pad); /* take first factory */ factory = g_value_get_object (g_value_array_get_nth (factories, 0)); /* Remove selected factory from the list. */ g_value_array_remove (factories, 0); GST_LOG_OBJECT (src, "trying factory %" GST_PTR_FORMAT, factory); /* Check if the caps are really supported by the factory. The * factory list is non-empty-subset filtered while caps * are only accepted by a pad if they are a subset of the * pad caps. * * FIXME: Only do this for fixed caps here. Non-fixed caps * can happen if a Parser/Converter was autoplugged before * this. We then assume that it will be able to convert to * everything that the decoder would want. * * A subset check will fail here because the parser caps * will be generic and while the decoder will only * support a subset of the parser caps. */ if (gst_caps_is_fixed (caps)) { const GList *templs; gboolean skip = FALSE; templs = gst_element_factory_get_static_pad_templates (factory); while (templs) { GstStaticPadTemplate *templ = (GstStaticPadTemplate *) templs->data; if (templ->direction == GST_PAD_SINK) { GstCaps *templcaps = gst_static_caps_get (&templ->static_caps); if (!gst_caps_is_subset (caps, templcaps)) { GST_DEBUG_OBJECT (src, "caps %" GST_PTR_FORMAT " not subset of %" GST_PTR_FORMAT, caps, templcaps); gst_caps_unref (templcaps); skip = TRUE; break; } gst_caps_unref (templcaps); } templs = g_list_next (templs); } if (skip) continue; } /* If the factory is for a parser we first check if the factory * was already used for the current chain. If it was used already * we would otherwise create an infinite loop here because the * parser apparently accepts its own output as input. * This is only done for parsers because it's perfectly valid * to have other element classes after each other because a * parser is the only one that does not change the data. A * valid example for this would be multiple id3demux in a row. */ is_parser_converter = strstr (gst_element_factory_get_metadata (factory, GST_ELEMENT_METADATA_KLASS), "Parser") != NULL; if (is_parser_converter) { gboolean skip = FALSE; GList *l; CHAIN_MUTEX_LOCK (chain); for (l = chain->elements; l; l = l->next) { GstDecodeElement *delem = (GstDecodeElement *) l->data; GstElement *otherelement = delem->element; if (gst_element_get_factory (otherelement) == factory) { skip = TRUE; break; } } if (!skip && chain->parent && chain->parent->parent) { GstDecodeChain *parent_chain = chain->parent->parent; GstDecodeElement *pelem = parent_chain->elements ? parent_chain->elements->data : NULL; if (pelem && gst_element_get_factory (pelem->element) == factory) skip = TRUE; } CHAIN_MUTEX_UNLOCK (chain); if (skip) { GST_DEBUG_OBJECT (dbin, "Skipping factory '%s' because it was already used in this chain", gst_plugin_feature_get_name (GST_PLUGIN_FEATURE_CAST (factory))); continue; } } /* emit autoplug-select to see what we should do with it. */ g_signal_emit (G_OBJECT (dbin), gst_decode_bin_signals[SIGNAL_AUTOPLUG_SELECT], 0, dpad, caps, factory, &ret); switch (ret) { case GST_AUTOPLUG_SELECT_TRY: GST_DEBUG_OBJECT (dbin, "autoplug select requested try"); break; case GST_AUTOPLUG_SELECT_EXPOSE: GST_DEBUG_OBJECT (dbin, "autoplug select requested expose"); /* expose the pad, we don't have the source element */ expose_pad (dbin, src, dpad, pad, caps, chain); res = TRUE; goto beach; case GST_AUTOPLUG_SELECT_SKIP: GST_DEBUG_OBJECT (dbin, "autoplug select requested skip"); continue; default: GST_WARNING_OBJECT (dbin, "autoplug select returned unhandled %d", ret); break; } /* 2.0. Unlink pad */ decode_pad_set_target (dpad, NULL); /* 2.1. Try to create an element */ if ((element = gst_element_factory_create (factory, NULL)) == NULL) { GST_WARNING_OBJECT (dbin, "Could not create an element from %s", gst_plugin_feature_get_name (GST_PLUGIN_FEATURE (factory))); g_string_append_printf (error_details, "Could not create an element from %s\n", gst_plugin_feature_get_name (GST_PLUGIN_FEATURE (factory))); continue; } /* Filter errors, this will prevent the element from causing the pipeline * to error while we test it using READY state. */ add_error_filter (dbin, element); /* We don't yet want the bin to control the element's state */ gst_element_set_locked_state (element, TRUE); /* ... add it ... */ if (!(gst_bin_add (GST_BIN_CAST (dbin), element))) { GST_WARNING_OBJECT (dbin, "Couldn't add %s to the bin", GST_ELEMENT_NAME (element)); remove_error_filter (dbin, element, NULL); g_string_append_printf (error_details, "Couldn't add %s to the bin\n", GST_ELEMENT_NAME (element)); gst_object_unref (element); continue; } /* Find its sink pad. */ if (!(sinkpad = find_sink_pad (element))) { GST_WARNING_OBJECT (dbin, "Element %s doesn't have a sink pad", GST_ELEMENT_NAME (element)); remove_error_filter (dbin, element, NULL); g_string_append_printf (error_details, "Element %s doesn't have a sink pad", GST_ELEMENT_NAME (element)); gst_bin_remove (GST_BIN (dbin), element); continue; } /* ... and try to link */ if ((gst_pad_link_full (pad, sinkpad, GST_PAD_LINK_CHECK_NOTHING)) != GST_PAD_LINK_OK) { GST_WARNING_OBJECT (dbin, "Link failed on pad %s:%s", GST_DEBUG_PAD_NAME (sinkpad)); remove_error_filter (dbin, element, NULL); g_string_append_printf (error_details, "Link failed on pad %s:%s", GST_DEBUG_PAD_NAME (sinkpad)); gst_object_unref (sinkpad); gst_bin_remove (GST_BIN (dbin), element); continue; } /* ... activate it ... */ if ((gst_element_set_state (element, GST_STATE_READY)) == GST_STATE_CHANGE_FAILURE) { GstMessage *error_msg; GST_WARNING_OBJECT (dbin, "Couldn't set %s to READY", GST_ELEMENT_NAME (element)); remove_error_filter (dbin, element, &error_msg); if (error_msg) { gchar *error_string = error_message_to_string (error_msg); g_string_append_printf (error_details, "Couldn't set %s to READY:\n%s", GST_ELEMENT_NAME (element), error_string); gst_message_unref (error_msg); g_free (error_string); } else { g_string_append_printf (error_details, "Couldn't set %s to READY", GST_ELEMENT_NAME (element)); } gst_object_unref (sinkpad); gst_bin_remove (GST_BIN (dbin), element); continue; } /* check if we still accept the caps on the pad after setting * the element to READY */ if (!gst_pad_query_accept_caps (sinkpad, caps)) { GstMessage *error_msg; GST_WARNING_OBJECT (dbin, "Element %s does not accept caps", GST_ELEMENT_NAME (element)); remove_error_filter (dbin, element, &error_msg); if (error_msg) { gchar *error_string = error_message_to_string (error_msg); g_string_append_printf (error_details, "Element %s does not accept caps:\n%s", GST_ELEMENT_NAME (element), error_string); gst_message_unref (error_msg); g_free (error_string); } else { g_string_append_printf (error_details, "Element %s does not accept caps", GST_ELEMENT_NAME (element)); } gst_element_set_state (element, GST_STATE_NULL); gst_object_unref (sinkpad); gst_bin_remove (GST_BIN (dbin), element); continue; } gst_object_unref (sinkpad); GST_LOG_OBJECT (dbin, "linked on pad %s:%s", GST_DEBUG_PAD_NAME (pad)); CHAIN_MUTEX_LOCK (chain); delem = g_slice_new0 (GstDecodeElement); delem->element = gst_object_ref (element); delem->capsfilter = NULL; chain->elements = g_list_prepend (chain->elements, delem); chain->demuxer = is_demuxer_element (element); chain->adaptive_demuxer = is_adaptive_demuxer_element (element); /* For adaptive streaming demuxer we insert a multiqueue after * this demuxer. * Now for the case where we have a container stream inside these * buffers, another demuxer will be plugged and after this second * demuxer there will be a second multiqueue. This second multiqueue * will get smaller buffers and will be the one emitting buffering * messages. * If we don't have a container stream inside the fragment buffers, * we'll insert a multiqueue below right after the next element after * the adaptive streaming demuxer. This is going to be a parser or * decoder, and will output smaller buffers. */ if (chain->parent && chain->parent->parent) { GstDecodeChain *parent_chain = chain->parent->parent; if (parent_chain->adaptive_demuxer) chain->demuxer = TRUE; } CHAIN_MUTEX_UNLOCK (chain); /* Set connection-speed property if needed */ if (chain->demuxer) { GParamSpec *pspec; if ((pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (element), "connection-speed"))) { guint64 speed = dbin->connection_speed / 1000; gboolean wrong_type = FALSE; if (G_PARAM_SPEC_TYPE (pspec) == G_TYPE_PARAM_UINT) { GParamSpecUInt *pspecuint = G_PARAM_SPEC_UINT (pspec); speed = CLAMP (speed, pspecuint->minimum, pspecuint->maximum); } else if (G_PARAM_SPEC_TYPE (pspec) == G_TYPE_PARAM_INT) { GParamSpecInt *pspecint = G_PARAM_SPEC_INT (pspec); speed = CLAMP (speed, pspecint->minimum, pspecint->maximum); } else if (G_PARAM_SPEC_TYPE (pspec) == G_TYPE_PARAM_UINT64) { GParamSpecUInt64 *pspecuint = G_PARAM_SPEC_UINT64 (pspec); speed = CLAMP (speed, pspecuint->minimum, pspecuint->maximum); } else if (G_PARAM_SPEC_TYPE (pspec) == G_TYPE_PARAM_INT64) { GParamSpecInt64 *pspecint = G_PARAM_SPEC_INT64 (pspec); speed = CLAMP (speed, pspecint->minimum, pspecint->maximum); } else { GST_WARNING_OBJECT (dbin, "The connection speed property %" G_GUINT64_FORMAT " of type %s" " is not usefull not setting it", speed, g_type_name (G_PARAM_SPEC_TYPE (pspec))); wrong_type = TRUE; } if (!wrong_type) { GST_DEBUG_OBJECT (dbin, "setting connection-speed=%" G_GUINT64_FORMAT " to demuxer element", speed); g_object_set (element, "connection-speed", speed, NULL); } } } /* try to configure the subtitle encoding property when we can */ pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (element), "subtitle-encoding"); if (pspec && G_PARAM_SPEC_VALUE_TYPE (pspec) == G_TYPE_STRING) { SUBTITLE_LOCK (dbin); GST_DEBUG_OBJECT (dbin, "setting subtitle-encoding=%s to element", dbin->encoding); g_object_set (G_OBJECT (element), "subtitle-encoding", dbin->encoding, NULL); SUBTITLE_UNLOCK (dbin); subtitle = TRUE; } else { subtitle = FALSE; } /* link this element further */ to_connect = connect_element (dbin, delem, chain); while (to_connect) { GstPad *opad = to_connect->data; gboolean expose_pad = FALSE; GstDecodeChain *new_chain; GstCaps *ocaps; ocaps = get_pad_caps (opad); expose_pad = analyze_new_pad (dbin, delem->element, opad, ocaps, chain, &new_chain); if (ocaps) gst_caps_unref (ocaps); if (expose_pad) { PadExposeData *expose_data = g_new0 (PadExposeData, 1); expose_data->chain = new_chain; expose_data->pad = gst_object_ref (opad); to_expose = g_list_prepend (to_expose, expose_data); } gst_object_unref (opad); to_connect = g_list_delete_link (to_connect, to_connect); } /* any pads left in to_expose are to be exposed */ /* Bring the element to the state of the parent */ /* First lock element's sinkpad stream lock so no data reaches * the possible new element added when caps are sent by element * while we're still sending sticky events */ GST_PAD_STREAM_LOCK (sinkpad); if ((gst_element_set_state (element, GST_STATE_PAUSED)) == GST_STATE_CHANGE_FAILURE || !send_sticky_events (dbin, pad)) { GstDecodeElement *dtmp = NULL; GstElement *tmp = NULL; GstMessage *error_msg; GST_PAD_STREAM_UNLOCK (sinkpad); GST_WARNING_OBJECT (dbin, "Couldn't set %s to PAUSED", GST_ELEMENT_NAME (element)); while (to_expose) { PadExposeData *expose_data = to_expose->data; gst_object_unref (expose_data->pad); g_free (expose_data); to_expose = g_list_delete_link (to_expose, to_expose); } remove_error_filter (dbin, element, &error_msg); if (error_msg) { gchar *error_string = error_message_to_string (error_msg); g_string_append_printf (error_details, "Couldn't set %s to PAUSED:\n%s", GST_ELEMENT_NAME (element), error_string); gst_message_unref (error_msg); g_free (error_string); } else { g_string_append_printf (error_details, "Couldn't set %s to PAUSED", GST_ELEMENT_NAME (element)); } /* Remove all elements in this chain that were just added. No * other thread could've added elements in the meantime */ CHAIN_MUTEX_LOCK (chain); do { GList *l; dtmp = chain->elements->data; tmp = dtmp->element; /* Disconnect any signal handlers that might be connected * in connect_element() or analyze_pad() */ if (dtmp->pad_added_id) g_signal_handler_disconnect (tmp, dtmp->pad_added_id); if (dtmp->pad_removed_id) g_signal_handler_disconnect (tmp, dtmp->pad_removed_id); if (dtmp->no_more_pads_id) g_signal_handler_disconnect (tmp, dtmp->no_more_pads_id); for (l = chain->pending_pads; l;) { GstPendingPad *pp = l->data; GList *n; if (GST_PAD_PARENT (pp->pad) != tmp) { l = l->next; continue; } gst_pending_pad_free (pp); /* Remove element from the list, update list head and go to the * next element in the list */ n = l->next; chain->pending_pads = g_list_delete_link (chain->pending_pads, l); l = n; } if (dtmp->capsfilter) { gst_bin_remove (GST_BIN (dbin), dtmp->capsfilter); gst_element_set_state (dtmp->capsfilter, GST_STATE_NULL); gst_object_unref (dtmp->capsfilter); } gst_bin_remove (GST_BIN (dbin), tmp); gst_element_set_state (tmp, GST_STATE_NULL); gst_object_unref (tmp); g_slice_free (GstDecodeElement, dtmp); chain->elements = g_list_delete_link (chain->elements, chain->elements); } while (tmp != element); CHAIN_MUTEX_UNLOCK (chain); continue; } else { /* Everything went well, the spice must flow now */ GST_PAD_STREAM_UNLOCK (sinkpad); } /* Remove error filter now, from now on we can't gracefully * handle errors of the element anymore */ remove_error_filter (dbin, element, NULL); /* Now let the bin handle the state */ gst_element_set_locked_state (element, FALSE); if (subtitle) { SUBTITLE_LOCK (dbin); /* we added the element now, add it to the list of subtitle-encoding * elements when we can set the property */ dbin->subtitles = g_list_prepend (dbin->subtitles, element); SUBTITLE_UNLOCK (dbin); } while (to_expose) { PadExposeData *expose_data = to_expose->data; GstCaps *ocaps; ocaps = get_pad_caps (expose_data->pad); expose_pad (dbin, delem->element, expose_data->chain->current_pad, expose_data->pad, ocaps, expose_data->chain); if (ocaps) gst_caps_unref (ocaps); gst_object_unref (expose_data->pad); g_free (expose_data); to_expose = g_list_delete_link (to_expose, to_expose); } res = TRUE; break; } beach: if (mqpad) gst_object_unref (mqpad); if (error_details) *deadend_details = g_string_free (error_details, (error_details->len == 0 || res)); else *deadend_details = NULL; return res; } static GstCaps * get_pad_caps (GstPad * pad) { GstCaps *caps; /* first check the pad caps, if this is set, we are positively sure it is * fixed and exactly what the element will produce. */ caps = gst_pad_get_current_caps (pad); /* then use the getcaps function if we don't have caps. These caps might not * be fixed in some cases, in which case analyze_new_pad will set up a * notify::caps signal to continue autoplugging. */ if (caps == NULL) caps = gst_pad_query_caps (pad, NULL); return caps; } /* Returns a list of pads that can be connected to already and * connects to pad-added and related signals */ static GList * connect_element (GstDecodeBin * dbin, GstDecodeElement * delem, GstDecodeChain * chain) { GstElement *element = delem->element; GList *pads; gboolean dynamic = FALSE; GList *to_connect = NULL; GST_DEBUG_OBJECT (dbin, "Attempting to connect element %s [chain:%p] further", GST_ELEMENT_NAME (element), chain); /* 1. Loop over pad templates, grabbing existing pads along the way */ for (pads = GST_ELEMENT_GET_CLASS (element)->padtemplates; pads; pads = g_list_next (pads)) { GstPadTemplate *templ = GST_PAD_TEMPLATE (pads->data); const gchar *templ_name; /* we are only interested in source pads */ if (GST_PAD_TEMPLATE_DIRECTION (templ) != GST_PAD_SRC) continue; templ_name = GST_PAD_TEMPLATE_NAME_TEMPLATE (templ); GST_DEBUG_OBJECT (dbin, "got a source pad template %s", templ_name); /* figure out what kind of pad this is */ switch (GST_PAD_TEMPLATE_PRESENCE (templ)) { case GST_PAD_ALWAYS: { /* get the pad that we need to autoplug */ GstPad *pad = gst_element_get_static_pad (element, templ_name); if (pad) { GST_DEBUG_OBJECT (dbin, "got the pad for always template %s", templ_name); /* here is the pad, we need to autoplug it */ to_connect = g_list_prepend (to_connect, pad); } else { /* strange, pad is marked as always but it's not * there. Fix the element */ GST_WARNING_OBJECT (dbin, "could not get the pad for always template %s", templ_name); } break; } case GST_PAD_SOMETIMES: { /* try to get the pad to see if it is already created or * not */ GstPad *pad = gst_element_get_static_pad (element, templ_name); if (pad) { GST_DEBUG_OBJECT (dbin, "got the pad for sometimes template %s", templ_name); /* the pad is created, we need to autoplug it */ to_connect = g_list_prepend (to_connect, pad); } else { GST_DEBUG_OBJECT (dbin, "did not get the sometimes pad of template %s", templ_name); /* we have an element that will create dynamic pads */ dynamic = TRUE; } break; } case GST_PAD_REQUEST: /* ignore request pads */ GST_DEBUG_OBJECT (dbin, "ignoring request padtemplate %s", templ_name); break; } } /* 2. if there are more potential pads, connect to relevant signals */ if (dynamic) { GST_LOG_OBJECT (dbin, "Adding signals to element %s in chain %p", GST_ELEMENT_NAME (element), chain); delem->pad_added_id = g_signal_connect (element, "pad-added", G_CALLBACK (pad_added_cb), chain); delem->pad_removed_id = g_signal_connect (element, "pad-removed", G_CALLBACK (pad_removed_cb), chain); delem->no_more_pads_id = g_signal_connect (element, "no-more-pads", G_CALLBACK (no_more_pads_cb), chain); } /* 3. return all pads that can be connected to already */ return to_connect; } /* expose_pad: * * Expose the given pad on the chain as a decoded pad. */ static void expose_pad (GstDecodeBin * dbin, GstElement * src, GstDecodePad * dpad, GstPad * pad, GstCaps * caps, GstDecodeChain * chain) { GstPad *mqpad = NULL; GST_DEBUG_OBJECT (dbin, "pad %s:%s, chain:%p", GST_DEBUG_PAD_NAME (pad), chain); /* If this is the first pad for this chain, there are no other elements * and the source element is not the multiqueue we must link through the * multiqueue. * * This is the case if a demuxer directly exposed a raw pad. */ if (chain->parent && !chain->elements && src != chain->parent->multiqueue) { GST_LOG_OBJECT (src, "connecting the pad through multiqueue"); decode_pad_set_target (dpad, NULL); if (!(mqpad = gst_decode_group_control_demuxer_pad (chain->parent, pad))) goto beach; pad = mqpad; decode_pad_set_target (dpad, pad); } gst_decode_pad_activate (dpad, chain); chain->endpad = gst_object_ref (dpad); chain->endcaps = gst_caps_ref (caps); EXPOSE_LOCK (dbin); if (dbin->decode_chain) { if (gst_decode_chain_is_complete (dbin->decode_chain)) { gst_decode_bin_expose (dbin); } } EXPOSE_UNLOCK (dbin); if (mqpad) gst_object_unref (mqpad); beach: return; } /* check_upstream_seekable: * * Check if upstream is seekable. */ static gboolean check_upstream_seekable (GstDecodeBin * dbin, GstPad * pad) { GstQuery *query; gint64 start = -1, stop = -1; gboolean seekable = FALSE; query = gst_query_new_seeking (GST_FORMAT_BYTES); if (!gst_pad_peer_query (pad, query)) { GST_DEBUG_OBJECT (dbin, "seeking query failed"); gst_query_unref (query); return FALSE; } gst_query_parse_seeking (query, NULL, &seekable, &start, &stop); gst_query_unref (query); /* try harder to query upstream size if we didn't get it the first time */ if (seekable && stop == -1) { GST_DEBUG_OBJECT (dbin, "doing duration query to fix up unset stop"); gst_pad_peer_query_duration (pad, GST_FORMAT_BYTES, &stop); } /* if upstream doesn't know the size, it's likely that it's not seekable in * practice even if it technically may be seekable */ if (seekable && (start != 0 || stop <= start)) { GST_DEBUG_OBJECT (dbin, "seekable but unknown start/stop -> disable"); return FALSE; } GST_DEBUG_OBJECT (dbin, "upstream seekable: %d", seekable); return seekable; } static void type_found (GstElement * typefind, guint probability, GstCaps * caps, GstDecodeBin * decode_bin) { GstPad *pad, *sink_pad; GstDecodeChain *chain; GST_DEBUG_OBJECT (decode_bin, "typefind found caps %" GST_PTR_FORMAT, caps); /* If the typefinder (but not something else) finds text/plain - i.e. that's * the top-level type of the file - then error out. */ if (gst_structure_has_name (gst_caps_get_structure (caps, 0), "text/plain")) { GST_ELEMENT_ERROR (decode_bin, STREAM, WRONG_TYPE, (_("This appears to be a text file")), ("decodebin cannot decode plain text files")); goto exit; } pad = gst_element_get_static_pad (typefind, "src"); sink_pad = gst_element_get_static_pad (typefind, "sink"); /* need some lock here to prevent race with shutdown state change * which might yank away e.g. decode_chain while building stuff here. * In typical cases, STREAM_LOCK is held and handles that, it need not * be held (if called from a proxied setcaps), so grab it anyway */ GST_PAD_STREAM_LOCK (sink_pad); /* FIXME: we can only deal with one type, we don't yet support dynamically changing * caps from the typefind element */ if (decode_bin->have_type || decode_bin->decode_chain) { } else { decode_bin->have_type = TRUE; decode_bin->decode_chain = gst_decode_chain_new (decode_bin, NULL, pad); chain = gst_decode_chain_ref (decode_bin->decode_chain); if (analyze_new_pad (decode_bin, typefind, pad, caps, decode_bin->decode_chain, NULL)) expose_pad (decode_bin, typefind, decode_bin->decode_chain->current_pad, pad, caps, decode_bin->decode_chain); gst_decode_chain_unref (chain); } GST_PAD_STREAM_UNLOCK (sink_pad); gst_object_unref (sink_pad); gst_object_unref (pad); exit: return; } static GstPadProbeReturn pad_event_cb (GstPad * pad, GstPadProbeInfo * info, gpointer data) { GstEvent *event = GST_PAD_PROBE_INFO_EVENT (info); GstPendingPad *ppad = (GstPendingPad *) data; GstDecodeChain *chain = ppad->chain; GstDecodeBin *dbin = chain->dbin; g_assert (ppad); g_assert (chain); g_assert (dbin); switch (GST_EVENT_TYPE (event)) { case GST_EVENT_EOS: GST_DEBUG_OBJECT (pad, "Received EOS on a non final pad, this stream " "ended too early"); chain->deadend = TRUE; chain->drained = TRUE; gst_object_replace ((GstObject **) & chain->current_pad, NULL); /* we don't set the endcaps because NULL endcaps means early EOS */ EXPOSE_LOCK (dbin); if (dbin->decode_chain) if (gst_decode_chain_is_complete (dbin->decode_chain)) gst_decode_bin_expose (dbin); EXPOSE_UNLOCK (dbin); break; default: break; } return GST_PAD_PROBE_OK; } static void pad_added_cb (GstElement * element, GstPad * pad, GstDecodeChain * chain) { GstCaps *caps; GstDecodeBin *dbin; GstDecodeChain *new_chain; dbin = chain->dbin; GST_DEBUG_OBJECT (pad, "pad added, chain:%p", chain); GST_PAD_STREAM_LOCK (pad); if (!gst_pad_is_active (pad)) { GST_PAD_STREAM_UNLOCK (pad); GST_DEBUG_OBJECT (pad, "Ignoring pad-added from a deactivated pad"); return; } caps = get_pad_caps (pad); if (analyze_new_pad (dbin, element, pad, caps, chain, &new_chain)) expose_pad (dbin, element, new_chain->current_pad, pad, caps, new_chain); if (caps) gst_caps_unref (caps); GST_PAD_STREAM_UNLOCK (pad); } static GstPadProbeReturn sink_pad_event_probe (GstPad * pad, GstPadProbeInfo * info, gpointer user_data) { GstDecodeGroup *group = (GstDecodeGroup *) user_data; GstEvent *event = GST_PAD_PROBE_INFO_EVENT (info); GstPad *peer = gst_pad_get_peer (pad); GstPadProbeReturn proberet = GST_PAD_PROBE_OK; GST_DEBUG_OBJECT (pad, "Got upstream event %s", GST_EVENT_TYPE_NAME (event)); if (peer == NULL) { GST_DEBUG_OBJECT (pad, "We are unlinked !"); if (group->parent && group->parent->next_groups) { GstDecodeGroup *last_group = g_list_last (group->parent->next_groups)->data; GST_DEBUG_OBJECT (pad, "We could send the event to another group (%p)", last_group); /* Grab another sinkpad for that last group through which we will forward this event */ if (last_group->reqpads) { GstPad *sinkpad = (GstPad *) last_group->reqpads->data; GstPad *otherpeer = gst_pad_get_peer (sinkpad); if (otherpeer) { GST_DEBUG_OBJECT (otherpeer, "Attempting to forward event"); if (gst_pad_send_event (otherpeer, gst_event_ref (event))) { gst_event_unref (event); proberet = GST_PAD_PROBE_HANDLED; } gst_object_unref (otherpeer); } } else { GST_DEBUG_OBJECT (pad, "No request pads, can't forward event"); } } } else { gst_object_unref (peer); } return proberet; } static GstPadProbeReturn sink_pad_query_probe (GstPad * pad, GstPadProbeInfo * info, gpointer user_data) { GstDecodeGroup *group = (GstDecodeGroup *) user_data; GstPad *peer = gst_pad_get_peer (pad); GstQuery *query = GST_PAD_PROBE_INFO_QUERY (info); GstPadProbeReturn proberet = GST_PAD_PROBE_OK; GST_DEBUG_OBJECT (pad, "Got upstream query %s", GST_QUERY_TYPE_NAME (query)); if (peer == NULL) { GST_DEBUG_OBJECT (pad, "We are unlinked !"); if (group->parent && group->parent->next_groups) { GstDecodeGroup *last_group = g_list_last (group->parent->next_groups)->data; GST_DEBUG_OBJECT (pad, "We could send the query to another group"); /* Grab another sinkpad for that last group through which we will forward this event */ if (last_group->reqpads) { GstPad *sinkpad = (GstPad *) last_group->reqpads->data; GstPad *otherpeer = gst_pad_get_peer (sinkpad); if (otherpeer) { GST_DEBUG_OBJECT (otherpeer, "Attempting to forward query"); if (gst_pad_query (otherpeer, query)) { proberet = GST_PAD_PROBE_HANDLED; } else GST_DEBUG ("FAILURE"); gst_object_unref (otherpeer); } else GST_DEBUG_OBJECT (sinkpad, "request pad not connected ??"); } else GST_DEBUG_OBJECT (pad, "No request pads ???"); } } else gst_object_unref (peer); return proberet; } static void pad_removed_cb (GstElement * element, GstPad * pad, GstDecodeChain * chain) { GList *l; GST_LOG_OBJECT (pad, "pad removed, chain:%p", chain); /* In fact, we don't have to do anything here, the active group will be * removed when the group's multiqueue is drained */ CHAIN_MUTEX_LOCK (chain); for (l = chain->pending_pads; l; l = l->next) { GstPendingPad *ppad = l->data; GstPad *opad = ppad->pad; if (pad == opad) { gst_pending_pad_free (ppad); chain->pending_pads = g_list_delete_link (chain->pending_pads, l); break; } } CHAIN_MUTEX_UNLOCK (chain); } static void no_more_pads_cb (GstElement * element, GstDecodeChain * chain) { GstDecodeGroup *group = NULL; GST_LOG_OBJECT (element, "got no more pads"); CHAIN_MUTEX_LOCK (chain); if (!chain->elements || ((GstDecodeElement *) chain->elements->data)->element != element) { GST_LOG_OBJECT (chain->dbin, "no-more-pads from old chain element '%s'", GST_OBJECT_NAME (element)); CHAIN_MUTEX_UNLOCK (chain); return; } else if (!chain->demuxer) { GST_LOG_OBJECT (chain->dbin, "no-more-pads from a non-demuxer element '%s'", GST_OBJECT_NAME (element)); CHAIN_MUTEX_UNLOCK (chain); return; } /* when we received no_more_pads, we can complete the pads of the chain */ if (!chain->next_groups && chain->active_group) { group = chain->active_group; } else if (chain->next_groups) { GList *iter; for (iter = chain->next_groups; iter; iter = g_list_next (iter)) { group = iter->data; if (!group->no_more_pads) break; } } if (!group) { GST_ERROR_OBJECT (chain->dbin, "can't find group for element"); CHAIN_MUTEX_UNLOCK (chain); return; } GST_DEBUG_OBJECT (element, "Setting group %p to complete", group); group->no_more_pads = TRUE; /* this group has prerolled enough to not need more pads, * we can probably set its buffering state to playing now */ GST_DEBUG_OBJECT (group->dbin, "Setting group %p multiqueue to " "'playing' buffering mode", group); decodebin_set_queue_size (group->dbin, group->multiqueue, FALSE, (group->parent ? group->parent->seekable : TRUE)); CHAIN_MUTEX_UNLOCK (chain); EXPOSE_LOCK (chain->dbin); if (chain->dbin->decode_chain) { if (gst_decode_chain_is_complete (chain->dbin->decode_chain)) { gst_decode_bin_expose (chain->dbin); } } EXPOSE_UNLOCK (chain->dbin); } static void caps_notify_cb (GstPad * pad, GParamSpec * unused, GstDecodeChain * chain) { GstElement *element; GList *l; GST_LOG_OBJECT (pad, "Notified caps for pad %s:%s", GST_DEBUG_PAD_NAME (pad)); /* Disconnect this; if we still need it, we'll reconnect to this in * analyze_new_pad */ element = GST_ELEMENT_CAST (gst_pad_get_parent (pad)); CHAIN_MUTEX_LOCK (chain); for (l = chain->pending_pads; l; l = l->next) { GstPendingPad *ppad = l->data; if (ppad->pad == pad) { gst_pending_pad_free (ppad); chain->pending_pads = g_list_delete_link (chain->pending_pads, l); break; } } CHAIN_MUTEX_UNLOCK (chain); pad_added_cb (element, pad, chain); gst_object_unref (element); } /* Decide whether an element is a demuxer based on the * klass and number/type of src pad templates it has */ static gboolean is_demuxer_element (GstElement * srcelement) { GstElementFactory *srcfactory; GstElementClass *elemclass; GList *walk; const gchar *klass; gint potential_src_pads = 0; srcfactory = gst_element_get_factory (srcelement); klass = gst_element_factory_get_metadata (srcfactory, GST_ELEMENT_METADATA_KLASS); /* Can't be a demuxer unless it has Demux in the klass name */ if (!strstr (klass, "Demux")) return FALSE; /* Walk the src pad templates and count how many the element * might produce */ elemclass = GST_ELEMENT_GET_CLASS (srcelement); walk = gst_element_class_get_pad_template_list (elemclass); while (walk != NULL) { GstPadTemplate *templ; templ = (GstPadTemplate *) walk->data; if (GST_PAD_TEMPLATE_DIRECTION (templ) == GST_PAD_SRC) { switch (GST_PAD_TEMPLATE_PRESENCE (templ)) { case GST_PAD_ALWAYS: case GST_PAD_SOMETIMES: if (strstr (GST_PAD_TEMPLATE_NAME_TEMPLATE (templ), "%")) potential_src_pads += 2; /* Might make multiple pads */ else potential_src_pads += 1; break; case GST_PAD_REQUEST: potential_src_pads += 2; break; } } walk = g_list_next (walk); } if (potential_src_pads < 2) return FALSE; return TRUE; } static gboolean is_adaptive_demuxer_element (GstElement * srcelement) { GstElementFactory *srcfactory; const gchar *klass; srcfactory = gst_element_get_factory (srcelement); klass = gst_element_factory_get_metadata (srcfactory, GST_ELEMENT_METADATA_KLASS); /* Can't be a demuxer unless it has Demux in the klass name */ if (!strstr (klass, "Demux") || !strstr (klass, "Adaptive")) return FALSE; return TRUE; } /* Returns TRUE if the caps are compatible with the caps specified in the 'caps' * property (which by default are the raw caps) * * The decodebin_lock should be taken ! */ static gboolean are_final_caps (GstDecodeBin * dbin, GstCaps * caps) { gboolean res; GST_LOG_OBJECT (dbin, "Checking with caps %" GST_PTR_FORMAT, caps); /* lock for getting the caps */ GST_OBJECT_LOCK (dbin); res = gst_caps_is_subset (caps, dbin->caps); GST_OBJECT_UNLOCK (dbin); GST_LOG_OBJECT (dbin, "Caps are %sfinal caps", res ? "" : "not "); return res; } /* gst_decode_bin_reset_buffering: * * Enables buffering on the last multiqueue of each group only, * disabling the rest * */ static void gst_decode_bin_reset_buffering (GstDecodeBin * dbin) { if (!dbin->use_buffering) return; GST_DEBUG_OBJECT (dbin, "Reseting multiqueues buffering"); if (dbin->decode_chain) { CHAIN_MUTEX_LOCK (dbin->decode_chain); gst_decode_chain_reset_buffering (dbin->decode_chain); CHAIN_MUTEX_UNLOCK (dbin->decode_chain); } } /**** * GstDecodeChain functions ****/ static gboolean gst_decode_chain_reset_buffering (GstDecodeChain * chain) { GstDecodeGroup *group; group = chain->active_group; GST_LOG_OBJECT (chain->dbin, "Resetting chain %p buffering, active group: %p", chain, group); if (group) { return gst_decode_group_reset_buffering (group); } return FALSE; } /* gst_decode_chain_get_current_group: * * Returns the current group of this chain, to which * new chains should be attached or NULL if the last * group didn't have no-more-pads. * * Not MT-safe: Call with parent chain lock! */ static GstDecodeGroup * gst_decode_chain_get_current_group (GstDecodeChain * chain) { GstDecodeGroup *group; if (!chain->next_groups && chain->active_group && chain->active_group->overrun && !chain->active_group->no_more_pads) { GST_WARNING_OBJECT (chain->dbin, "Currently active group %p is exposed" " and wants to add a new pad without having signaled no-more-pads", chain->active_group); return NULL; } if (chain->next_groups && (group = chain->next_groups->data) && group->overrun && !group->no_more_pads) { GST_WARNING_OBJECT (chain->dbin, "Currently newest pending group %p " "had overflow but didn't signal no-more-pads", group); return NULL; } /* Now we know that we can really return something useful */ if (!chain->active_group) { chain->active_group = group = gst_decode_group_new (chain->dbin, chain); } else if (!chain->active_group->overrun && !chain->active_group->no_more_pads) { group = chain->active_group; } else { GList *iter; group = NULL; for (iter = chain->next_groups; iter; iter = g_list_next (iter)) { GstDecodeGroup *next_group = iter->data; if (!next_group->overrun && !next_group->no_more_pads) { group = next_group; break; } } } if (!group) { group = gst_decode_group_new (chain->dbin, chain); chain->next_groups = g_list_append (chain->next_groups, group); } return group; } static void gst_decode_group_free_internal (GstDecodeGroup * group, gboolean hide); static void gst_decode_chain_unref (GstDecodeChain * chain) { if (g_atomic_int_dec_and_test (&chain->refs)) { g_mutex_clear (&chain->lock); g_slice_free (GstDecodeChain, chain); } } static GstDecodeChain * gst_decode_chain_ref (GstDecodeChain * chain) { g_atomic_int_inc (&chain->refs); return chain; } static void gst_decode_chain_free_internal (GstDecodeChain * chain, gboolean hide) { GList *l, *set_to_null = NULL; CHAIN_MUTEX_LOCK (chain); GST_DEBUG_OBJECT (chain->dbin, "%s chain %p", (hide ? "Hiding" : "Freeing"), chain); if (chain->active_group) { gst_decode_group_free_internal (chain->active_group, hide); if (!hide) chain->active_group = NULL; } for (l = chain->next_groups; l; l = l->next) { gst_decode_group_free_internal ((GstDecodeGroup *) l->data, hide); if (!hide) l->data = NULL; } if (!hide) { g_list_free (chain->next_groups); chain->next_groups = NULL; } if (!hide) { for (l = chain->old_groups; l; l = l->next) { GstDecodeGroup *group = l->data; gst_decode_group_free (group); } g_list_free (chain->old_groups); chain->old_groups = NULL; } for (l = chain->pending_pads; l; l = l->next) { GstPendingPad *ppad = l->data; gst_pending_pad_free (ppad); l->data = NULL; } g_list_free (chain->pending_pads); chain->pending_pads = NULL; for (l = chain->elements; l; l = l->next) { GstDecodeElement *delem = l->data; GstElement *element = delem->element; if (delem->pad_added_id) g_signal_handler_disconnect (element, delem->pad_added_id); delem->pad_added_id = 0; if (delem->pad_removed_id) g_signal_handler_disconnect (element, delem->pad_removed_id); delem->pad_removed_id = 0; if (delem->no_more_pads_id) g_signal_handler_disconnect (element, delem->no_more_pads_id); delem->no_more_pads_id = 0; if (delem->capsfilter) { if (GST_OBJECT_PARENT (delem->capsfilter) == GST_OBJECT_CAST (chain->dbin)) gst_bin_remove (GST_BIN_CAST (chain->dbin), delem->capsfilter); if (!hide) { set_to_null = g_list_append (set_to_null, gst_object_ref (delem->capsfilter)); } } if (GST_OBJECT_PARENT (element) == GST_OBJECT_CAST (chain->dbin)) gst_bin_remove (GST_BIN_CAST (chain->dbin), element); if (!hide) { set_to_null = g_list_append (set_to_null, gst_object_ref (element)); } SUBTITLE_LOCK (chain->dbin); /* remove possible subtitle element */ chain->dbin->subtitles = g_list_remove (chain->dbin->subtitles, element); SUBTITLE_UNLOCK (chain->dbin); if (!hide) { if (delem->capsfilter) { gst_object_unref (delem->capsfilter); delem->capsfilter = NULL; } gst_object_unref (element); l->data = NULL; g_slice_free (GstDecodeElement, delem); } } if (!hide) { g_list_free (chain->elements); chain->elements = NULL; } if (chain->endpad) { if (chain->endpad->exposed) { gst_element_remove_pad (GST_ELEMENT_CAST (chain->dbin), GST_PAD_CAST (chain->endpad)); } decode_pad_set_target (chain->endpad, NULL); chain->endpad->exposed = FALSE; if (!hide) { gst_object_unref (chain->endpad); chain->endpad = NULL; } } if (!hide && chain->current_pad) { gst_object_unref (chain->current_pad); chain->current_pad = NULL; } if (chain->pad) { gst_object_unref (chain->pad); chain->pad = NULL; } if (chain->endcaps) { gst_caps_unref (chain->endcaps); chain->endcaps = NULL; } g_free (chain->deadend_details); chain->deadend_details = NULL; GST_DEBUG_OBJECT (chain->dbin, "%s chain %p", (hide ? "Hidden" : "Freed"), chain); CHAIN_MUTEX_UNLOCK (chain); while (set_to_null) { GstElement *element = set_to_null->data; set_to_null = g_list_delete_link (set_to_null, set_to_null); gst_element_set_state (element, GST_STATE_NULL); gst_object_unref (element); } if (!hide) gst_decode_chain_unref (chain); } /* gst_decode_chain_free: * * Completely frees and removes the chain and all * child groups from decodebin. * * MT-safe, don't hold the chain lock or any child chain's lock * when calling this! */ static void gst_decode_chain_free (GstDecodeChain * chain) { gst_decode_chain_free_internal (chain, FALSE); } /* gst_decode_chain_new: * * Creates a new decode chain and initializes it. * * It's up to the caller to add it to the list of child chains of * a group! */ static GstDecodeChain * gst_decode_chain_new (GstDecodeBin * dbin, GstDecodeGroup * parent, GstPad * pad) { GstDecodeChain *chain = g_slice_new0 (GstDecodeChain); GST_DEBUG_OBJECT (dbin, "Creating new chain %p with parent group %p", chain, parent); chain->dbin = dbin; chain->parent = parent; chain->refs = 1; g_mutex_init (&chain->lock); chain->pad = gst_object_ref (pad); return chain; } /**** * GstDecodeGroup functions ****/ /* The overrun callback is used to expose groups that have not yet had their * no_more_pads called while the (large) multiqueue overflowed. When this * happens we must assume that the no_more_pads will not arrive anymore and we * must expose the pads that we have. */ static void multi_queue_overrun_cb (GstElement * queue, GstDecodeGroup * group) { GstDecodeBin *dbin; dbin = group->dbin; GST_LOG_OBJECT (dbin, "multiqueue '%s' (%p) is full", GST_OBJECT_NAME (queue), queue); group->overrun = TRUE; /* this group has prerolled enough to not need more pads, * we can probably set its buffering state to playing now */ GST_DEBUG_OBJECT (group->dbin, "Setting group %p multiqueue to " "'playing' buffering mode", group); decodebin_set_queue_size (group->dbin, group->multiqueue, FALSE, (group->parent ? group->parent->seekable : TRUE)); /* FIXME: We should make sure that everything gets exposed now * even if child chains are not complete because the will never * be complete! Ignore any non-complete chains when exposing * and never expose them later */ EXPOSE_LOCK (dbin); if (dbin->decode_chain) { if (gst_decode_chain_is_complete (dbin->decode_chain)) { if (!gst_decode_bin_expose (dbin)) GST_WARNING_OBJECT (dbin, "Couldn't expose group"); } } EXPOSE_UNLOCK (dbin); } static void gst_decode_group_free_internal (GstDecodeGroup * group, gboolean hide) { GList *l; GST_DEBUG_OBJECT (group->dbin, "%s group %p", (hide ? "Hiding" : "Freeing"), group); for (l = group->children; l; l = l->next) { GstDecodeChain *chain = (GstDecodeChain *) l->data; gst_decode_chain_free_internal (chain, hide); if (!hide) l->data = NULL; } if (!hide) { g_list_free (group->children); group->children = NULL; } if (!hide) { for (l = group->reqpads; l; l = l->next) { GstPad *pad = l->data; gst_element_release_request_pad (group->multiqueue, pad); gst_object_unref (pad); l->data = NULL; } g_list_free (group->reqpads); group->reqpads = NULL; } if (group->multiqueue) { if (group->overrunsig) { g_signal_handler_disconnect (group->multiqueue, group->overrunsig); group->overrunsig = 0; } if (GST_OBJECT_PARENT (group->multiqueue) == GST_OBJECT_CAST (group->dbin)) gst_bin_remove (GST_BIN_CAST (group->dbin), group->multiqueue); if (!hide) { gst_element_set_state (group->multiqueue, GST_STATE_NULL); gst_object_unref (group->multiqueue); group->multiqueue = NULL; } } GST_DEBUG_OBJECT (group->dbin, "%s group %p", (hide ? "Hid" : "Freed"), group); if (!hide) g_slice_free (GstDecodeGroup, group); } /* gst_decode_group_free: * * Completely frees and removes the decode group and all * it's children. * * Never call this from any streaming thread! * * Not MT-safe, call with parent's chain lock! */ static void gst_decode_group_free (GstDecodeGroup * group) { gst_decode_group_free_internal (group, FALSE); } /* gst_decode_group_hide: * * Hide the decode group only, this means that * all child endpads are removed from decodebin * and all signals are unconnected. * * No element is set to NULL state and completely * unrefed here. * * Can be called from streaming threads. * * Not MT-safe, call with parent's chain lock! */ static void gst_decode_group_hide (GstDecodeGroup * group) { gst_decode_group_free_internal (group, TRUE); } /* gst_decode_chain_free_hidden_groups: * * Frees any decode groups that were hidden previously. * This allows keeping memory use from ballooning when * switching chains repeatedly. * * A new throwaway thread will be created to free the * groups, so any delay does not block the setup of a * new group. * * Not MT-safe, call with parent's chain lock! */ static void gst_decode_chain_free_hidden_groups (GList * old_groups) { GList *l; for (l = old_groups; l; l = l->next) { GstDecodeGroup *group = l->data; gst_decode_group_free (group); } g_list_free (old_groups); } static void gst_decode_chain_start_free_hidden_groups_thread (GstDecodeChain * chain) { GThread *thread; GError *error = NULL; GList *old_groups; old_groups = chain->old_groups; if (!old_groups) return; chain->old_groups = NULL; thread = g_thread_try_new ("free-hidden-groups", (GThreadFunc) gst_decode_chain_free_hidden_groups, old_groups, &error); if (!thread || error) { GST_ERROR ("Failed to start free-hidden-groups thread: %s", error ? error->message : "unknown reason"); g_clear_error (&error); chain->old_groups = old_groups; return; } GST_DEBUG_OBJECT (chain->dbin, "Started free-hidden-groups thread"); /* We do not need to wait for it or get any results from it */ g_thread_unref (thread); } static void decodebin_set_queue_size (GstDecodeBin * dbin, GstElement * multiqueue, gboolean preroll, gboolean seekable) { gboolean use_buffering; /* get the current config from the multiqueue */ g_object_get (multiqueue, "use-buffering", &use_buffering, NULL); decodebin_set_queue_size_full (dbin, multiqueue, use_buffering, preroll, seekable); } /* configure queue sizes, this depends on the buffering method and if we are * playing or prerolling. */ static void decodebin_set_queue_size_full (GstDecodeBin * dbin, GstElement * multiqueue, gboolean use_buffering, gboolean preroll, gboolean seekable) { guint max_bytes, max_buffers; guint64 max_time; GST_DEBUG_OBJECT (multiqueue, "use buffering %d", use_buffering); if (preroll || use_buffering) { /* takes queue limits, initially we only queue up up to the max bytes limit, * with a default of 2MB. we use the same values for buffering mode. */ if (preroll || (max_bytes = dbin->max_size_bytes) == 0) max_bytes = AUTO_PREROLL_SIZE_BYTES; if (preroll || (max_buffers = dbin->max_size_buffers) == 0) max_buffers = AUTO_PREROLL_SIZE_BUFFERS; if (preroll || (max_time = dbin->max_size_time) == 0) { if (dbin->use_buffering && !preroll) max_time = 5 * GST_SECOND; else max_time = seekable ? AUTO_PREROLL_SEEKABLE_SIZE_TIME : AUTO_PREROLL_NOT_SEEKABLE_SIZE_TIME; } } else { /* update runtime limits. At runtime, we try to keep the amount of buffers * in the queues as low as possible (but at least 5 buffers). */ if (dbin->use_buffering) max_bytes = 0; else if ((max_bytes = dbin->max_size_bytes) == 0) max_bytes = AUTO_PLAY_SIZE_BYTES; if ((max_buffers = dbin->max_size_buffers) == 0) max_buffers = AUTO_PLAY_SIZE_BUFFERS; /* this is a multiqueue with disabled buffering, don't limit max_time */ if (dbin->use_buffering) max_time = 0; else if ((max_time = dbin->max_size_time) == 0) max_time = AUTO_PLAY_SIZE_TIME; } GST_DEBUG_OBJECT (multiqueue, "setting limits %u bytes, %u buffers, " "%" G_GUINT64_FORMAT " time", max_bytes, max_buffers, max_time); g_object_set (multiqueue, "max-size-bytes", max_bytes, "max-size-time", max_time, "max-size-buffers", max_buffers, NULL); } /* gst_decode_group_new: * @dbin: Parent decodebin * @parent: Parent chain or %NULL * * Creates a new GstDecodeGroup. It is up to the caller to add it to the list * of groups. */ static GstDecodeGroup * gst_decode_group_new (GstDecodeBin * dbin, GstDecodeChain * parent) { GstDecodeGroup *group = g_slice_new0 (GstDecodeGroup); GstElement *mq; gboolean seekable; GST_DEBUG_OBJECT (dbin, "Creating new group %p with parent chain %p", group, parent); group->dbin = dbin; group->parent = parent; mq = group->multiqueue = gst_element_factory_make ("multiqueue", NULL); if (G_UNLIKELY (!group->multiqueue)) goto missing_multiqueue; /* configure queue sizes for preroll */ seekable = FALSE; if (parent && parent->demuxer) { GstElement *element = ((GstDecodeElement *) parent->elements->data)->element; GstPad *pad = gst_element_get_static_pad (element, "sink"); if (pad) { seekable = parent->seekable = check_upstream_seekable (dbin, pad); gst_object_unref (pad); } } decodebin_set_queue_size_full (dbin, mq, FALSE, TRUE, seekable); group->overrunsig = g_signal_connect (mq, "overrun", G_CALLBACK (multi_queue_overrun_cb), group); gst_element_set_state (mq, GST_STATE_PAUSED); gst_bin_add (GST_BIN (dbin), gst_object_ref (mq)); return group; /* ERRORS */ missing_multiqueue: { gst_element_post_message (GST_ELEMENT_CAST (dbin), gst_missing_element_message_new (GST_ELEMENT_CAST (dbin), "multiqueue")); GST_ELEMENT_ERROR (dbin, CORE, MISSING_PLUGIN, (NULL), ("no multiqueue!")); g_slice_free (GstDecodeGroup, group); return NULL; } } /* gst_decode_group_control_demuxer_pad * * Adds a new demuxer srcpad to the given group. * * Returns the srcpad of the multiqueue corresponding the given pad. * Returns NULL if there was an error. */ static GstPad * gst_decode_group_control_demuxer_pad (GstDecodeGroup * group, GstPad * pad) { GstDecodeBin *dbin; GstPad *srcpad, *sinkpad; GstIterator *it = NULL; GValue item = { 0, }; dbin = group->dbin; GST_LOG_OBJECT (dbin, "group:%p pad %s:%s", group, GST_DEBUG_PAD_NAME (pad)); srcpad = NULL; if (G_UNLIKELY (!group->multiqueue)) return NULL; if (!(sinkpad = gst_element_get_request_pad (group->multiqueue, "sink_%u"))) { GST_ERROR_OBJECT (dbin, "Couldn't get sinkpad from multiqueue"); return NULL; } if ((gst_pad_link_full (pad, sinkpad, GST_PAD_LINK_CHECK_NOTHING) != GST_PAD_LINK_OK)) { GST_ERROR_OBJECT (dbin, "Couldn't link demuxer and multiqueue"); goto error; } it = gst_pad_iterate_internal_links (sinkpad); if (!it || (gst_iterator_next (it, &item)) != GST_ITERATOR_OK || ((srcpad = g_value_dup_object (&item)) == NULL)) { GST_ERROR_OBJECT (dbin, "Couldn't get srcpad from multiqueue for sinkpad %" GST_PTR_FORMAT, sinkpad); goto error; } gst_pad_add_probe (sinkpad, GST_PAD_PROBE_TYPE_EVENT_UPSTREAM, sink_pad_event_probe, group, NULL); gst_pad_add_probe (sinkpad, GST_PAD_PROBE_TYPE_QUERY_UPSTREAM, sink_pad_query_probe, group, NULL); CHAIN_MUTEX_LOCK (group->parent); group->reqpads = g_list_prepend (group->reqpads, gst_object_ref (sinkpad)); CHAIN_MUTEX_UNLOCK (group->parent); beach: if (G_IS_VALUE (&item)) g_value_unset (&item); if (it) gst_iterator_free (it); gst_object_unref (sinkpad); return srcpad; error: gst_element_release_request_pad (group->multiqueue, sinkpad); goto beach; } /* gst_decode_group_is_complete: * * Checks if the group is complete, this means that * a) overrun of the multiqueue or no-more-pads happened * b) all child chains are complete * * Not MT-safe, always call with decodebin expose lock */ static gboolean gst_decode_group_is_complete (GstDecodeGroup * group) { GList *l; gboolean complete = TRUE; if (!group->overrun && !group->no_more_pads) { complete = FALSE; goto out; } for (l = group->children; l; l = l->next) { GstDecodeChain *chain = l->data; if (!gst_decode_chain_is_complete (chain)) { complete = FALSE; goto out; } } out: GST_DEBUG_OBJECT (group->dbin, "Group %p is complete: %d", group, complete); return complete; } /* gst_decode_chain_is_complete: * * Returns TRUE if the chain is complete, this means either * a) This chain is a dead end, i.e. we have no suitable plugins * b) This chain ends in an endpad and this is blocked or exposed * * Not MT-safe, always call with decodebin expose lock */ static gboolean gst_decode_chain_is_complete (GstDecodeChain * chain) { gboolean complete = FALSE; CHAIN_MUTEX_LOCK (chain); if (chain->dbin->shutdown) goto out; if (chain->deadend) { complete = TRUE; goto out; } if (chain->endpad && (chain->endpad->blocked || chain->endpad->exposed)) { complete = TRUE; goto out; } if (chain->demuxer) { if (chain->active_group && gst_decode_group_is_complete (chain->active_group)) { complete = TRUE; goto out; } } out: CHAIN_MUTEX_UNLOCK (chain); GST_DEBUG_OBJECT (chain->dbin, "Chain %p is complete: %d", chain, complete); return complete; } /* Flushing group/chains */ static void flush_group (GstDecodeGroup * group, gboolean flushing) { GList *tmp; GST_DEBUG ("group %p flushing:%d", group, flushing); if (group->drained == flushing) return; for (tmp = group->children; tmp; tmp = tmp->next) { GstDecodeChain *chain = (GstDecodeChain *) tmp->data; flush_chain (chain, flushing); } GST_DEBUG ("Setting group %p to drained:%d", group, flushing); group->drained = flushing; } static void flush_chain (GstDecodeChain * chain, gboolean flushing) { GList *tmp; GstDecodeBin *dbin = chain->dbin; GST_DEBUG_OBJECT (dbin, "chain %p (pad %s:%s) flushing:%d", chain, GST_DEBUG_PAD_NAME (chain->pad), flushing); if (chain->drained == flushing) return; /* if unflushing, check if we should switch to last group */ if (flushing == FALSE && chain->next_groups) { GstDecodeGroup *target_group = (GstDecodeGroup *) g_list_last (chain->next_groups)->data; gst_decode_chain_start_free_hidden_groups_thread (chain); /* Hide active group (we're sure it's not that one we'll be using) */ GST_DEBUG_OBJECT (dbin, "Switching from active group %p to group %p", chain->active_group, target_group); gst_decode_group_hide (chain->active_group); chain->old_groups = g_list_prepend (chain->old_groups, chain->active_group); chain->active_group = target_group; /* Hide all groups but the target_group */ for (tmp = chain->next_groups; tmp; tmp = tmp->next) { GstDecodeGroup *group = (GstDecodeGroup *) tmp->data; if (group != target_group) { gst_decode_group_hide (group); chain->old_groups = g_list_prepend (chain->old_groups, group); } } /* Clear next groups */ g_list_free (chain->next_groups); chain->next_groups = NULL; } /* Mark all groups as flushing */ if (chain->active_group) flush_group (chain->active_group, flushing); for (tmp = chain->next_groups; tmp; tmp = tmp->next) { GstDecodeGroup *group = (GstDecodeGroup *) tmp->data; flush_group (group, flushing); } GST_DEBUG ("Setting chain %p to drained:%d", chain, flushing); chain->drained = flushing; } static gboolean drain_and_switch_chains (GstDecodeChain * chain, GstDecodePad * drainpad, gboolean * last_group, gboolean * drained, gboolean * switched); /* drain_and_switch_chains/groups: * * CALL WITH CHAIN LOCK (or group parent) TAKEN ! * * Goes down the chains/groups until it finds the chain * to which the drainpad belongs. * * It marks that pad/chain as drained and then will figure * out which group to switch to or not. * * last_chain will be set to TRUE if the group to which the * pad belongs is the last one. * * drained will be set to TRUE if the chain/group is drained. * * Returns: TRUE if the chain contained the target pad */ static gboolean drain_and_switch_group (GstDecodeGroup * group, GstDecodePad * drainpad, gboolean * last_group, gboolean * drained, gboolean * switched) { gboolean handled = FALSE; GList *tmp; GST_DEBUG ("Checking group %p (target pad %s:%s)", group, GST_DEBUG_PAD_NAME (drainpad)); /* Definitely can't be in drained groups */ if (G_UNLIKELY (group->drained)) { goto beach; } /* Figure out if all our chains are drained with the * new information */ group->drained = TRUE; for (tmp = group->children; tmp; tmp = tmp->next) { GstDecodeChain *chain = (GstDecodeChain *) tmp->data; gboolean subdrained = FALSE; handled |= drain_and_switch_chains (chain, drainpad, last_group, &subdrained, switched); if (!subdrained) group->drained = FALSE; } beach: GST_DEBUG ("group %p (last_group:%d, drained:%d, switched:%d, handled:%d)", group, *last_group, group->drained, *switched, handled); *drained = group->drained; return handled; } static gboolean drain_and_switch_chains (GstDecodeChain * chain, GstDecodePad * drainpad, gboolean * last_group, gboolean * drained, gboolean * switched) { gboolean handled = FALSE; GstDecodeBin *dbin = chain->dbin; GST_DEBUG ("Checking chain %p %s:%s (target pad %s:%s)", chain, GST_DEBUG_PAD_NAME (chain->pad), GST_DEBUG_PAD_NAME (drainpad)); CHAIN_MUTEX_LOCK (chain); /* Definitely can't be in drained chains */ if (G_UNLIKELY (chain->drained)) { goto beach; } if (chain->endpad) { /* Check if we're reached the target endchain */ if (drainpad != NULL && chain == drainpad->chain) { GST_DEBUG ("Found the target chain"); drainpad->drained = TRUE; handled = TRUE; } chain->drained = chain->endpad->drained; goto beach; } /* We known there are groups to switch to */ if (chain->next_groups) *last_group = FALSE; /* Check the active group */ if (chain->active_group) { gboolean subdrained = FALSE; handled = drain_and_switch_group (chain->active_group, drainpad, last_group, &subdrained, switched); /* The group is drained, see if we can switch to another */ if ((handled || drainpad == NULL) && subdrained && !*switched) { if (chain->next_groups) { /* Switch to next group */ GST_DEBUG_OBJECT (dbin, "Hiding current group %p", chain->active_group); gst_decode_group_hide (chain->active_group); chain->old_groups = g_list_prepend (chain->old_groups, chain->active_group); GST_DEBUG_OBJECT (dbin, "Switching to next group %p", chain->next_groups->data); chain->active_group = chain->next_groups->data; chain->next_groups = g_list_delete_link (chain->next_groups, chain->next_groups); gst_decode_chain_start_free_hidden_groups_thread (chain); *switched = TRUE; chain->drained = FALSE; } else { GST_DEBUG ("Group %p was the last in chain %p", chain->active_group, chain); chain->drained = TRUE; /* We're drained ! */ } } else { if (subdrained && !chain->next_groups) *drained = TRUE; } } beach: CHAIN_MUTEX_UNLOCK (chain); GST_DEBUG ("Chain %p (handled:%d, last_group:%d, drained:%d, switched:%d)", chain, handled, *last_group, chain->drained, *switched); *drained = chain->drained; if (*drained) g_signal_emit (dbin, gst_decode_bin_signals[SIGNAL_DRAINED], 0, NULL); return handled; } /* check if the group is drained, meaning all pads have seen an EOS * event. */ static gboolean gst_decode_pad_handle_eos (GstDecodePad * pad) { gboolean last_group = TRUE; gboolean switched = FALSE; gboolean drained = FALSE; GstDecodeChain *chain = pad->chain; GstDecodeBin *dbin = chain->dbin; GST_LOG_OBJECT (dbin, "pad %p", pad); EXPOSE_LOCK (dbin); if (dbin->decode_chain) { drain_and_switch_chains (dbin->decode_chain, pad, &last_group, &drained, &switched); if (switched) { /* If we resulted in a group switch, expose what's needed */ if (gst_decode_chain_is_complete (dbin->decode_chain)) gst_decode_bin_expose (dbin); } } EXPOSE_UNLOCK (dbin); return last_group; } /* gst_decode_group_is_drained: * * Check is this group is drained and cache this result. * The group is drained if all child chains are drained. * * Not MT-safe, call with group->parent's lock */ static gboolean gst_decode_group_is_drained (GstDecodeGroup * group) { GList *l; gboolean drained = TRUE; if (group->drained) { drained = TRUE; goto out; } for (l = group->children; l; l = l->next) { GstDecodeChain *chain = l->data; CHAIN_MUTEX_LOCK (chain); if (!gst_decode_chain_is_drained (chain)) drained = FALSE; CHAIN_MUTEX_UNLOCK (chain); if (!drained) goto out; } group->drained = drained; out: GST_DEBUG_OBJECT (group->dbin, "Group %p is drained: %d", group, drained); return drained; } /* gst_decode_chain_is_drained: * * Check is the chain is drained, which means that * either * * a) it's endpad is drained * b) there are no pending pads, the active group is drained * and there are no next groups * * Not MT-safe, call with chain lock */ static gboolean gst_decode_chain_is_drained (GstDecodeChain * chain) { gboolean drained = FALSE; if (chain->endpad) { drained = chain->endpad->drained; goto out; } if (chain->pending_pads) { drained = FALSE; goto out; } if (chain->active_group && gst_decode_group_is_drained (chain->active_group) && !chain->next_groups) { drained = TRUE; goto out; } out: GST_DEBUG_OBJECT (chain->dbin, "Chain %p is drained: %d", chain, drained); return drained; } static gboolean gst_decode_group_reset_buffering (GstDecodeGroup * group) { GList *l; gboolean ret = TRUE; GST_DEBUG_OBJECT (group->dbin, "Group reset buffering %p %s", group, GST_ELEMENT_NAME (group->multiqueue)); for (l = group->children; l; l = l->next) { GstDecodeChain *chain = l->data; CHAIN_MUTEX_LOCK (chain); if (!gst_decode_chain_reset_buffering (chain)) { ret = FALSE; } CHAIN_MUTEX_UNLOCK (chain); } decodebin_set_queue_size_full (group->dbin, group->multiqueue, !ret, FALSE, (group->parent ? group->parent->seekable : TRUE)); if (ret) { /* all chains are buffering already, no need to do it here */ g_object_set (group->multiqueue, "use-buffering", FALSE, NULL); } else { g_object_set (group->multiqueue, "use-buffering", TRUE, "low-percent", group->dbin->low_percent, "high-percent", group->dbin->high_percent, NULL); } GST_DEBUG_OBJECT (group->dbin, "Setting %s buffering to %d", GST_ELEMENT_NAME (group->multiqueue), !ret); return TRUE; } /* sort_end_pads: * GCompareFunc to use with lists of GstPad. * Sorts pads by mime type. * First video (raw, then non-raw), then audio (raw, then non-raw), * then others. * * Return: negative if ab */ static gint sort_end_pads (GstDecodePad * da, GstDecodePad * db) { gint va, vb; GstCaps *capsa, *capsb; GstStructure *sa, *sb; const gchar *namea, *nameb; gchar *ida, *idb; gint ret; capsa = get_pad_caps (GST_PAD_CAST (da)); capsb = get_pad_caps (GST_PAD_CAST (db)); sa = gst_caps_get_structure ((const GstCaps *) capsa, 0); sb = gst_caps_get_structure ((const GstCaps *) capsb, 0); namea = gst_structure_get_name (sa); nameb = gst_structure_get_name (sb); if (g_strrstr (namea, "video/x-raw")) va = 0; else if (g_strrstr (namea, "video/")) va = 1; else if (g_strrstr (namea, "audio/x-raw")) va = 2; else if (g_strrstr (namea, "audio/")) va = 3; else va = 4; if (g_strrstr (nameb, "video/x-raw")) vb = 0; else if (g_strrstr (nameb, "video/")) vb = 1; else if (g_strrstr (nameb, "audio/x-raw")) vb = 2; else if (g_strrstr (nameb, "audio/")) vb = 3; else vb = 4; gst_caps_unref (capsa); gst_caps_unref (capsb); if (va != vb) return va - vb; /* if otherwise the same, sort by stream-id */ ida = gst_pad_get_stream_id (GST_PAD_CAST (da)); idb = gst_pad_get_stream_id (GST_PAD_CAST (db)); ret = (ida) ? ((idb) ? strcmp (ida, idb) : -1) : 1; g_free (ida); g_free (idb); return ret; } static GstCaps * _gst_element_get_linked_caps (GstElement * src, GstElement * sink, GstPad ** srcpad) { GstIterator *it; GstElement *parent; GstPad *pad, *peer; gboolean done = FALSE; GstCaps *caps = NULL; GValue item = { 0, }; it = gst_element_iterate_src_pads (src); while (!done) { switch (gst_iterator_next (it, &item)) { case GST_ITERATOR_OK: pad = g_value_get_object (&item); peer = gst_pad_get_peer (pad); if (peer) { parent = gst_pad_get_parent_element (peer); if (parent == sink) { caps = gst_pad_get_current_caps (pad); if (srcpad) { gst_object_ref (pad); *srcpad = pad; } done = TRUE; } if (parent) gst_object_unref (parent); gst_object_unref (peer); } g_value_reset (&item); break; case GST_ITERATOR_RESYNC: gst_iterator_resync (it); break; case GST_ITERATOR_ERROR: case GST_ITERATOR_DONE: done = TRUE; break; } } g_value_unset (&item); gst_iterator_free (it); return caps; } static GQuark topology_structure_name = 0; static GQuark topology_caps = 0; static GQuark topology_next = 0; static GQuark topology_pad = 0; static GQuark topology_element_srcpad = 0; /* FIXME: Invent gst_structure_take_structure() to prevent all the * structure copying for nothing */ static GstStructure * gst_decode_chain_get_topology (GstDecodeChain * chain) { GstStructure *s, *u; GList *l; GstCaps *caps; if (G_UNLIKELY ((chain->endpad || chain->deadend) && (chain->endcaps == NULL))) { GST_WARNING ("End chain without valid caps !"); return NULL; } u = gst_structure_new_id_empty (topology_structure_name); /* Now at the last element */ if ((chain->elements || !chain->active_group) && (chain->endpad || chain->deadend)) { s = gst_structure_new_id_empty (topology_structure_name); gst_structure_id_set (u, topology_caps, GST_TYPE_CAPS, chain->endcaps, NULL); if (chain->endpad) { gst_structure_id_set (u, topology_pad, GST_TYPE_PAD, chain->endpad, NULL); gst_structure_id_set (u, topology_element_srcpad, GST_TYPE_PAD, chain->endpad, NULL); } gst_structure_id_set (s, topology_next, GST_TYPE_STRUCTURE, u, NULL); gst_structure_free (u); u = s; } else if (chain->active_group) { GValue list = { 0, }; GValue item = { 0, }; g_value_init (&list, GST_TYPE_LIST); g_value_init (&item, GST_TYPE_STRUCTURE); for (l = chain->active_group->children; l; l = l->next) { s = gst_decode_chain_get_topology (l->data); if (s) { gst_value_set_structure (&item, s); gst_value_list_append_value (&list, &item); g_value_reset (&item); gst_structure_free (s); } } gst_structure_id_set_value (u, topology_next, &list); g_value_unset (&list); g_value_unset (&item); } /* Get caps between all elements in this chain */ l = (chain->elements && chain->elements->next) ? chain->elements : NULL; for (; l && l->next; l = l->next) { GstDecodeElement *delem, *delem_next; GstElement *elem, *elem_next; GstCaps *caps; GstPad *srcpad; delem = l->data; elem = delem->element; delem_next = l->next->data; elem_next = delem_next->element; srcpad = NULL; caps = _gst_element_get_linked_caps (elem_next, elem, &srcpad); if (caps) { s = gst_structure_new_id_empty (topology_structure_name); gst_structure_id_set (u, topology_caps, GST_TYPE_CAPS, caps, NULL); gst_caps_unref (caps); gst_structure_id_set (s, topology_next, GST_TYPE_STRUCTURE, u, NULL); gst_structure_free (u); u = s; } if (srcpad) { gst_structure_id_set (u, topology_element_srcpad, GST_TYPE_PAD, srcpad, NULL); gst_object_unref (srcpad); } } /* Caps that resulted in this chain */ caps = get_pad_caps (chain->pad); if (G_UNLIKELY (!caps)) { GST_WARNING_OBJECT (chain->pad, "Couldn't get the caps of decode chain"); return u; } gst_structure_id_set (u, topology_caps, GST_TYPE_CAPS, caps, NULL); gst_structure_id_set (u, topology_element_srcpad, GST_TYPE_PAD, chain->pad, NULL); gst_caps_unref (caps); return u; } static void gst_decode_bin_post_topology_message (GstDecodeBin * dbin) { GstStructure *s; GstMessage *msg; s = gst_decode_chain_get_topology (dbin->decode_chain); if (G_UNLIKELY (s == NULL)) return; msg = gst_message_new_element (GST_OBJECT (dbin), s); gst_element_post_message (GST_ELEMENT (dbin), msg); } static gboolean debug_sticky_event (GstPad * pad, GstEvent ** event, gpointer user_data) { GST_DEBUG_OBJECT (pad, "sticky event %s (%p)", GST_EVENT_TYPE_NAME (*event), *event); return TRUE; } /* Must only be called if the toplevel chain is complete and blocked! */ /* Not MT-safe, call with decodebin expose lock! */ static gboolean gst_decode_bin_expose (GstDecodeBin * dbin) { GList *tmp, *endpads; gboolean missing_plugin; GString *missing_plugin_details; gboolean already_exposed; gboolean last_group; retry: endpads = NULL; missing_plugin = FALSE; already_exposed = TRUE; last_group = TRUE; missing_plugin_details = g_string_new (""); GST_DEBUG_OBJECT (dbin, "Exposing currently active chains/groups"); /* Don't expose if we're currently shutting down */ DYN_LOCK (dbin); if (G_UNLIKELY (dbin->shutdown)) { GST_WARNING_OBJECT (dbin, "Currently, shutting down, aborting exposing"); DYN_UNLOCK (dbin); return FALSE; } DYN_UNLOCK (dbin); /* Get the pads that we're going to expose and mark things as exposed */ if (!gst_decode_chain_expose (dbin->decode_chain, &endpads, &missing_plugin, missing_plugin_details, &last_group)) { g_list_foreach (endpads, (GFunc) gst_object_unref, NULL); g_list_free (endpads); g_string_free (missing_plugin_details, TRUE); GST_ERROR_OBJECT (dbin, "Broken chain/group tree"); g_return_val_if_reached (FALSE); return FALSE; } if (endpads == NULL) { if (missing_plugin) { if (missing_plugin_details->len > 0) { gchar *details = g_string_free (missing_plugin_details, FALSE); GST_ELEMENT_ERROR (dbin, CORE, MISSING_PLUGIN, (NULL), ("no suitable plugins found:\n%s", details)); g_free (details); } else { g_string_free (missing_plugin_details, TRUE); GST_ELEMENT_ERROR (dbin, CORE, MISSING_PLUGIN, (NULL), ("no suitable plugins found")); } } else { /* in this case, the stream ended without buffers, * just post a warning */ g_string_free (missing_plugin_details, TRUE); GST_WARNING_OBJECT (dbin, "All streams finished without buffers. " "Last group: %d", last_group); if (last_group) { GST_ELEMENT_ERROR (dbin, STREAM, FAILED, (NULL), ("all streams without buffers")); } else { gboolean switched = FALSE; gboolean drained = FALSE; drain_and_switch_chains (dbin->decode_chain, NULL, &last_group, &drained, &switched); GST_ELEMENT_WARNING (dbin, STREAM, FAILED, (NULL), ("all streams without buffers")); if (switched) { if (gst_decode_chain_is_complete (dbin->decode_chain)) goto retry; else return FALSE; } } } do_async_done (dbin); return FALSE; } g_string_free (missing_plugin_details, TRUE); /* Check if this was called when everything was exposed already */ for (tmp = endpads; tmp && already_exposed; tmp = tmp->next) { GstDecodePad *dpad = tmp->data; already_exposed &= dpad->exposed; if (!already_exposed) break; } if (already_exposed) { GST_DEBUG_OBJECT (dbin, "Everything was exposed already!"); g_list_foreach (endpads, (GFunc) gst_object_unref, NULL); g_list_free (endpads); return TRUE; } /* going to expose something, reset buffering */ gst_decode_bin_reset_buffering (dbin); /* Set all already exposed pads to blocked */ for (tmp = endpads; tmp; tmp = tmp->next) { GstDecodePad *dpad = tmp->data; if (dpad->exposed) { GST_DEBUG_OBJECT (dpad, "blocking exposed pad"); gst_decode_pad_set_blocked (dpad, TRUE); } } /* re-order pads : video, then audio, then others */ endpads = g_list_sort (endpads, (GCompareFunc) sort_end_pads); /* Expose pads */ for (tmp = endpads; tmp; tmp = tmp->next) { GstDecodePad *dpad = (GstDecodePad *) tmp->data; gchar *padname; /* 1. rewrite name */ padname = g_strdup_printf ("src_%u", dbin->nbpads); dbin->nbpads++; GST_DEBUG_OBJECT (dbin, "About to expose dpad %s as %s", GST_OBJECT_NAME (dpad), padname); gst_object_set_name (GST_OBJECT (dpad), padname); g_free (padname); gst_pad_sticky_events_foreach (GST_PAD_CAST (dpad), debug_sticky_event, dpad); /* 2. activate and add */ if (!dpad->exposed) { dpad->exposed = TRUE; if (!gst_element_add_pad (GST_ELEMENT (dbin), GST_PAD_CAST (dpad))) { /* not really fatal, we can try to add the other pads */ g_warning ("error adding pad to decodebin"); dpad->exposed = FALSE; continue; } } /* 3. emit signal */ GST_INFO_OBJECT (dpad, "added new decoded pad"); } /* 4. Signal no-more-pads. This allows the application to hook stuff to the * exposed pads */ GST_LOG_OBJECT (dbin, "signaling no-more-pads"); gst_element_no_more_pads (GST_ELEMENT (dbin)); /* 5. Send a custom element message with the stream topology */ if (dbin->post_stream_topology) gst_decode_bin_post_topology_message (dbin); /* 6. Unblock internal pads. The application should have connected stuff now * so that streaming can continue. */ for (tmp = endpads; tmp; tmp = tmp->next) { GstDecodePad *dpad = (GstDecodePad *) tmp->data; GST_DEBUG_OBJECT (dpad, "unblocking"); gst_decode_pad_unblock (dpad); GST_DEBUG_OBJECT (dpad, "unblocked"); gst_object_unref (dpad); } g_list_free (endpads); do_async_done (dbin); GST_DEBUG_OBJECT (dbin, "Exposed everything"); return TRUE; } /* gst_decode_chain_expose: * * Check if the chain can be exposed and add all endpads * to the endpads list. * * Also update the active group's multiqueue to the * runtime limits. * * Not MT-safe, call with decodebin expose lock! * */ static gboolean gst_decode_chain_expose (GstDecodeChain * chain, GList ** endpads, gboolean * missing_plugin, GString * missing_plugin_details, gboolean * last_group) { GstDecodeGroup *group; GList *l; GstDecodeBin *dbin; if (chain->deadend) { if (chain->endcaps) { if (chain->deadend_details) { g_string_append (missing_plugin_details, chain->deadend_details); g_string_append_c (missing_plugin_details, '\n'); } else { gchar *desc = gst_pb_utils_get_codec_description (chain->endcaps); gchar *caps_str = gst_caps_to_string (chain->endcaps); g_string_append_printf (missing_plugin_details, "Missing decoder: %s (%s)\n", desc, caps_str); g_free (caps_str); g_free (desc); } *missing_plugin = TRUE; } return TRUE; } if (chain->endpad) { if (!chain->endpad->blocked && !chain->endpad->exposed) return FALSE; *endpads = g_list_prepend (*endpads, gst_object_ref (chain->endpad)); return TRUE; } if (chain->next_groups) *last_group = FALSE; group = chain->active_group; if (!group) return FALSE; if (!group->no_more_pads && !group->overrun) return FALSE; dbin = group->dbin; /* we can now disconnect any overrun signal, which is used to expose the * group. */ if (group->overrunsig) { GST_LOG_OBJECT (dbin, "Disconnecting overrun"); g_signal_handler_disconnect (group->multiqueue, group->overrunsig); group->overrunsig = 0; } for (l = group->children; l; l = l->next) { GstDecodeChain *childchain = l->data; if (!gst_decode_chain_expose (childchain, endpads, missing_plugin, missing_plugin_details, last_group)) return FALSE; } return TRUE; } /************************* * GstDecodePad functions *************************/ static void gst_decode_pad_class_init (GstDecodePadClass * klass) { } static void gst_decode_pad_init (GstDecodePad * pad) { pad->chain = NULL; pad->blocked = FALSE; pad->exposed = FALSE; pad->drained = FALSE; gst_object_ref_sink (pad); } static GstPadProbeReturn source_pad_blocked_cb (GstPad * pad, GstPadProbeInfo * info, gpointer user_data) { GstDecodePad *dpad = user_data; GstDecodeChain *chain; GstDecodeBin *dbin; GstPadProbeReturn ret = GST_PAD_PROBE_OK; if (GST_PAD_PROBE_INFO_TYPE (info) & GST_PAD_PROBE_TYPE_EVENT_DOWNSTREAM) { GstEvent *event = GST_PAD_PROBE_INFO_EVENT (info); GST_LOG_OBJECT (pad, "Seeing event '%s'", GST_EVENT_TYPE_NAME (event)); if (!GST_EVENT_IS_SERIALIZED (event)) { /* do not block on sticky or out of band events otherwise the allocation query from demuxer might block the loop thread */ GST_LOG_OBJECT (pad, "Letting OOB event through"); return GST_PAD_PROBE_PASS; } if (GST_EVENT_IS_STICKY (event) && GST_EVENT_TYPE (event) != GST_EVENT_EOS) { /* manually push sticky events to ghost pad to avoid exposing pads * that don't have the sticky events. Handle EOS separately as we * want to block the pad on it if we didn't get any buffers before * EOS and expose the pad then. */ gst_pad_push_event (GST_PAD_CAST (dpad), gst_event_ref (event)); /* let the sticky events pass */ ret = GST_PAD_PROBE_PASS; /* we only want to try to expose on CAPS events */ if (GST_EVENT_TYPE (event) != GST_EVENT_CAPS) { GST_LOG_OBJECT (pad, "Letting sticky non-CAPS event through"); goto done; } } } else if (GST_PAD_PROBE_INFO_TYPE (info) & GST_PAD_PROBE_TYPE_QUERY_DOWNSTREAM) { GstQuery *query = GST_PAD_PROBE_INFO_QUERY (info); if (!GST_QUERY_IS_SERIALIZED (query)) { /* do not block on non-serialized queries */ GST_LOG_OBJECT (pad, "Letting non-serialized query through"); return GST_PAD_PROBE_PASS; } if (!gst_pad_has_current_caps (pad)) { /* do not block on allocation queries before we have caps, * this would deadlock because we are doing no autoplugging * without caps. * TODO: Try to do autoplugging based on the query caps */ GST_LOG_OBJECT (pad, "Letting serialized query before caps through"); return GST_PAD_PROBE_PASS; } } chain = dpad->chain; dbin = chain->dbin; GST_LOG_OBJECT (dpad, "blocked: dpad->chain:%p", chain); dpad->blocked = TRUE; EXPOSE_LOCK (dbin); if (dbin->decode_chain) { if (gst_decode_chain_is_complete (dbin->decode_chain)) { if (!gst_decode_bin_expose (dbin)) GST_WARNING_OBJECT (dbin, "Couldn't expose group"); } } EXPOSE_UNLOCK (dbin); done: return ret; } static GstPadProbeReturn source_pad_event_probe (GstPad * pad, GstPadProbeInfo * info, gpointer user_data) { GstEvent *event = GST_PAD_PROBE_INFO_EVENT (info); GstDecodePad *dpad = user_data; gboolean res = TRUE; GST_LOG_OBJECT (pad, "%s dpad:%p", GST_EVENT_TYPE_NAME (event), dpad); if (GST_EVENT_TYPE (event) == GST_EVENT_EOS) { GST_DEBUG_OBJECT (pad, "we received EOS"); /* Check if all pads are drained. * * If there is no next group, we will let the EOS go through. * * If there is a next group but the current group isn't completely * drained, we will drop the EOS event. * * If there is a next group to expose and this was the last non-drained * pad for that group, we will remove the ghostpad of the current group * first, which unlinks the peer and so drops the EOS. */ res = gst_decode_pad_handle_eos (dpad); } if (res) return GST_PAD_PROBE_OK; else return GST_PAD_PROBE_DROP; } static void gst_decode_pad_set_blocked (GstDecodePad * dpad, gboolean blocked) { GstDecodeBin *dbin = dpad->dbin; GstPad *opad; DYN_LOCK (dbin); GST_DEBUG_OBJECT (dpad, "blocking pad: %d", blocked); opad = gst_ghost_pad_get_target (GST_GHOST_PAD_CAST (dpad)); if (!opad) goto out; /* do not block if shutting down. * we do not consider/expect it blocked further below, but use other trick */ if (!blocked || !dbin->shutdown) { if (blocked) { if (dpad->block_id == 0) dpad->block_id = gst_pad_add_probe (opad, GST_PAD_PROBE_TYPE_BLOCK_DOWNSTREAM | GST_PAD_PROBE_TYPE_QUERY_DOWNSTREAM, source_pad_blocked_cb, gst_object_ref (dpad), (GDestroyNotify) gst_object_unref); } else { if (dpad->block_id != 0) { gst_pad_remove_probe (opad, dpad->block_id); dpad->block_id = 0; } dpad->blocked = FALSE; } } if (blocked) { if (dbin->shutdown) { /* deactivate to force flushing state to prevent NOT_LINKED errors */ gst_pad_set_active (GST_PAD_CAST (dpad), FALSE); /* note that deactivating the target pad would have no effect here, * since elements are typically connected first (and pads exposed), * and only then brought to PAUSED state (so pads activated) */ } else { gst_object_ref (dpad); dbin->blocked_pads = g_list_prepend (dbin->blocked_pads, dpad); } } else { GList *l; if ((l = g_list_find (dbin->blocked_pads, dpad))) { gst_object_unref (dpad); dbin->blocked_pads = g_list_delete_link (dbin->blocked_pads, l); } } gst_object_unref (opad); out: DYN_UNLOCK (dbin); } static void gst_decode_pad_add_drained_check (GstDecodePad * dpad) { gst_pad_add_probe (GST_PAD_CAST (dpad), GST_PAD_PROBE_TYPE_EVENT_DOWNSTREAM, source_pad_event_probe, dpad, NULL); } static void gst_decode_pad_activate (GstDecodePad * dpad, GstDecodeChain * chain) { g_return_if_fail (chain != NULL); dpad->chain = chain; gst_pad_set_active (GST_PAD_CAST (dpad), TRUE); gst_decode_pad_set_blocked (dpad, TRUE); gst_decode_pad_add_drained_check (dpad); } static void gst_decode_pad_unblock (GstDecodePad * dpad) { gst_decode_pad_set_blocked (dpad, FALSE); } static gboolean gst_decode_pad_event (GstPad * pad, GstObject * parent, GstEvent * event) { GstDecodeBin *dbin = GST_DECODE_BIN (parent); if (GST_EVENT_TYPE (event) == GST_EVENT_SEEK && dbin && dbin->decode_chain) { GstElement *demuxer = NULL; /* For adaptive demuxers we send the seek event directly to the demuxer. * See https://bugzilla.gnome.org/show_bug.cgi?id=606382 */ CHAIN_MUTEX_LOCK (dbin->decode_chain); if (dbin->decode_chain->adaptive_demuxer) { GstDecodeElement *delem = dbin->decode_chain->elements->data; demuxer = gst_object_ref (delem->element); } CHAIN_MUTEX_UNLOCK (dbin->decode_chain); if (demuxer) { gboolean ret; GST_DEBUG_OBJECT (dbin, "Sending SEEK event directly to adaptive streaming demuxer %s", GST_OBJECT_NAME (demuxer)); ret = gst_element_send_event (demuxer, event); gst_object_unref (demuxer); return ret; } } return gst_pad_event_default (pad, parent, event); } static gboolean gst_decode_pad_query (GstPad * pad, GstObject * parent, GstQuery * query) { GstDecodePad *dpad = GST_DECODE_PAD (parent); gboolean ret = FALSE; CHAIN_MUTEX_LOCK (dpad->chain); if (!dpad->exposed && !dpad->dbin->shutdown && !dpad->chain->deadend && dpad->chain->elements) { GstDecodeElement *delem = dpad->chain->elements->data; ret = FALSE; GST_DEBUG_OBJECT (dpad->dbin, "calling autoplug-query for %s (element %s): %" GST_PTR_FORMAT, GST_PAD_NAME (dpad), GST_ELEMENT_NAME (delem->element), query); g_signal_emit (G_OBJECT (dpad->dbin), gst_decode_bin_signals[SIGNAL_AUTOPLUG_QUERY], 0, dpad, delem->element, query, &ret); if (ret) GST_DEBUG_OBJECT (dpad->dbin, "autoplug-query returned %d: %" GST_PTR_FORMAT, ret, query); else GST_DEBUG_OBJECT (dpad->dbin, "autoplug-query returned %d", ret); } CHAIN_MUTEX_UNLOCK (dpad->chain); /* If exposed or nothing handled the query use the default handler */ if (!ret) ret = gst_pad_query_default (pad, parent, query); return ret; } /*gst_decode_pad_new: * * Creates a new GstDecodePad for the given pad. */ static GstDecodePad * gst_decode_pad_new (GstDecodeBin * dbin, GstDecodeChain * chain) { GstDecodePad *dpad; GstProxyPad *ppad; GstPadTemplate *pad_tmpl; GST_DEBUG_OBJECT (dbin, "making new decodepad"); pad_tmpl = gst_static_pad_template_get (&decoder_bin_src_template); dpad = g_object_new (GST_TYPE_DECODE_PAD, "direction", GST_PAD_SRC, "template", pad_tmpl, NULL); gst_ghost_pad_construct (GST_GHOST_PAD_CAST (dpad)); dpad->chain = chain; dpad->dbin = dbin; gst_object_unref (pad_tmpl); ppad = gst_proxy_pad_get_internal (GST_PROXY_PAD (dpad)); gst_pad_set_query_function (GST_PAD_CAST (ppad), gst_decode_pad_query); gst_pad_set_event_function (GST_PAD_CAST (dpad), gst_decode_pad_event); gst_object_unref (ppad); return dpad; } static void gst_pending_pad_free (GstPendingPad * ppad) { g_assert (ppad); g_assert (ppad->pad); if (ppad->event_probe_id != 0) gst_pad_remove_probe (ppad->pad, ppad->event_probe_id); if (ppad->notify_caps_id) g_signal_handler_disconnect (ppad->pad, ppad->notify_caps_id); gst_object_unref (ppad->pad); g_slice_free (GstPendingPad, ppad); } /***** * Element add/remove *****/ static void do_async_start (GstDecodeBin * dbin) { GstMessage *message; dbin->async_pending = TRUE; message = gst_message_new_async_start (GST_OBJECT_CAST (dbin)); parent_class->handle_message (GST_BIN_CAST (dbin), message); } static void do_async_done (GstDecodeBin * dbin) { GstMessage *message; if (dbin->async_pending) { message = gst_message_new_async_done (GST_OBJECT_CAST (dbin), GST_CLOCK_TIME_NONE); parent_class->handle_message (GST_BIN_CAST (dbin), message); dbin->async_pending = FALSE; } } /***** * convenience functions *****/ /* find_sink_pad * * Returns the first sink pad of the given element, or NULL if it doesn't have * any. */ static GstPad * find_sink_pad (GstElement * element) { GstIterator *it; GstPad *pad = NULL; GValue item = { 0, }; it = gst_element_iterate_sink_pads (element); if ((gst_iterator_next (it, &item)) == GST_ITERATOR_OK) pad = g_value_dup_object (&item); g_value_unset (&item); gst_iterator_free (it); return pad; } /* call with dyn_lock held */ static void unblock_pads (GstDecodeBin * dbin) { GList *tmp; GST_LOG_OBJECT (dbin, "unblocking pads"); for (tmp = dbin->blocked_pads; tmp; tmp = tmp->next) { GstDecodePad *dpad = (GstDecodePad *) tmp->data; GstPad *opad; opad = gst_ghost_pad_get_target (GST_GHOST_PAD_CAST (dpad)); if (!opad) continue; GST_DEBUG_OBJECT (dpad, "unblocking"); if (dpad->block_id != 0) { gst_pad_remove_probe (opad, dpad->block_id); dpad->block_id = 0; } dpad->blocked = FALSE; /* make flushing, prevent NOT_LINKED */ gst_pad_set_active (GST_PAD_CAST (dpad), FALSE); gst_object_unref (dpad); gst_object_unref (opad); GST_DEBUG_OBJECT (dpad, "unblocked"); } /* clear, no more blocked pads */ g_list_free (dbin->blocked_pads); dbin->blocked_pads = NULL; } static GstStateChangeReturn gst_decode_bin_change_state (GstElement * element, GstStateChange transition) { GstStateChangeReturn ret = GST_STATE_CHANGE_SUCCESS; GstDecodeBin *dbin = GST_DECODE_BIN (element); GstDecodeChain *chain_to_free = NULL; switch (transition) { case GST_STATE_CHANGE_NULL_TO_READY: if (dbin->typefind == NULL) goto missing_typefind; break; case GST_STATE_CHANGE_READY_TO_PAUSED: /* Make sure we've cleared all existing chains */ EXPOSE_LOCK (dbin); if (dbin->decode_chain) { gst_decode_chain_free (dbin->decode_chain); dbin->decode_chain = NULL; } EXPOSE_UNLOCK (dbin); DYN_LOCK (dbin); GST_LOG_OBJECT (dbin, "clearing shutdown flag"); dbin->shutdown = FALSE; DYN_UNLOCK (dbin); dbin->have_type = FALSE; ret = GST_STATE_CHANGE_ASYNC; do_async_start (dbin); /* connect a signal to find out when the typefind element found * a type */ dbin->have_type_id = g_signal_connect (dbin->typefind, "have-type", G_CALLBACK (type_found), dbin); break; case GST_STATE_CHANGE_PAUSED_TO_READY: if (dbin->have_type_id) g_signal_handler_disconnect (dbin->typefind, dbin->have_type_id); dbin->have_type_id = 0; DYN_LOCK (dbin); GST_LOG_OBJECT (dbin, "setting shutdown flag"); dbin->shutdown = TRUE; unblock_pads (dbin); DYN_UNLOCK (dbin); default: break; } { GstStateChangeReturn bret; bret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition); if (G_UNLIKELY (bret == GST_STATE_CHANGE_FAILURE)) goto activate_failed; else if (G_UNLIKELY (bret == GST_STATE_CHANGE_NO_PREROLL)) { do_async_done (dbin); ret = bret; } } switch (transition) { case GST_STATE_CHANGE_PAUSED_TO_READY: do_async_done (dbin); EXPOSE_LOCK (dbin); if (dbin->decode_chain) { chain_to_free = dbin->decode_chain; gst_decode_chain_free_internal (dbin->decode_chain, TRUE); dbin->decode_chain = NULL; } EXPOSE_UNLOCK (dbin); if (chain_to_free) gst_decode_chain_free (chain_to_free); g_list_free_full (dbin->buffering_status, (GDestroyNotify) gst_message_unref); dbin->buffering_status = NULL; break; case GST_STATE_CHANGE_READY_TO_NULL: default: break; } return ret; /* ERRORS */ missing_typefind: { gst_element_post_message (element, gst_missing_element_message_new (element, "typefind")); GST_ELEMENT_ERROR (dbin, CORE, MISSING_PLUGIN, (NULL), ("no typefind!")); return GST_STATE_CHANGE_FAILURE; } activate_failed: { GST_DEBUG_OBJECT (element, "element failed to change states -- activation problem?"); do_async_done (dbin); return GST_STATE_CHANGE_FAILURE; } } static void gst_decode_bin_handle_message (GstBin * bin, GstMessage * msg) { GstDecodeBin *dbin = GST_DECODE_BIN (bin); gboolean drop = FALSE; if (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_ERROR) { GST_OBJECT_LOCK (dbin); drop = (g_list_find (dbin->filtered, GST_MESSAGE_SRC (msg)) != NULL); if (drop) dbin->filtered_errors = g_list_prepend (dbin->filtered_errors, gst_message_ref (msg)); GST_OBJECT_UNLOCK (dbin); } else if (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_BUFFERING) { gint perc, msg_perc; gint smaller_perc = 100; GstMessage *smaller = NULL; GList *found = NULL; GList *iter; /* buffering messages must be aggregated as there might be multiple * multiqueue in the pipeline and their independent buffering messages * will confuse the application * * decodebin keeps a list of messages received from elements that are * buffering. * Rules are: * 1) Always post the smaller buffering % * 2) If an element posts a 100% buffering message, remove it from the list * 3) When there are no more messages on the list, post 100% message * 4) When an element posts a new buffering message, update the one * on the list to this new value */ BUFFERING_LOCK (dbin); gst_message_parse_buffering (msg, &msg_perc); /* * Single loop for 2 things: * 1) Look for a message with the same source * 1.1) If the received message is 100%, remove it from the list * 2) Find the minimum buffering from the list */ for (iter = dbin->buffering_status; iter;) { GstMessage *bufstats = iter->data; if (GST_MESSAGE_SRC (bufstats) == GST_MESSAGE_SRC (msg)) { found = iter; if (msg_perc < 100) { gst_message_unref (iter->data); bufstats = iter->data = gst_message_ref (msg); } else { GList *current = iter; /* remove the element here and avoid confusing the loop */ iter = g_list_next (iter); gst_message_unref (current->data); dbin->buffering_status = g_list_delete_link (dbin->buffering_status, current); continue; } } gst_message_parse_buffering (bufstats, &perc); if (perc < smaller_perc) { smaller_perc = perc; smaller = bufstats; } iter = g_list_next (iter); } if (found == NULL && msg_perc < 100) { if (msg_perc < smaller_perc) { smaller_perc = msg_perc; smaller = msg; } dbin->buffering_status = g_list_prepend (dbin->buffering_status, gst_message_ref (msg)); } /* now compute the buffering message that should be posted */ if (smaller_perc == 100) { g_assert (dbin->buffering_status == NULL); /* we are posting the original received msg */ } else { gst_message_replace (&msg, smaller); } BUFFERING_UNLOCK (dbin); } if (drop) gst_message_unref (msg); else GST_BIN_CLASS (parent_class)->handle_message (bin, msg); } static gboolean gst_decode_bin_remove_element (GstBin * bin, GstElement * element) { GstDecodeBin *dbin = GST_DECODE_BIN (bin); gboolean removed = FALSE, post = FALSE; GList *iter; BUFFERING_LOCK (bin); for (iter = dbin->buffering_status; iter; iter = iter->next) { GstMessage *bufstats = iter->data; if (GST_MESSAGE_SRC (bufstats) == GST_OBJECT_CAST (element) || gst_object_has_as_ancestor (GST_MESSAGE_SRC (bufstats), GST_OBJECT_CAST (element))) { gst_message_unref (bufstats); dbin->buffering_status = g_list_delete_link (dbin->buffering_status, iter); removed = TRUE; break; } } if (removed && dbin->buffering_status == NULL) post = TRUE; BUFFERING_UNLOCK (bin); if (post) { gst_element_post_message (GST_ELEMENT_CAST (bin), gst_message_new_buffering (GST_OBJECT_CAST (dbin), 100)); } return GST_BIN_CLASS (parent_class)->remove_element (bin, element); } gboolean gst_decode_bin_plugin_init (GstPlugin * plugin) { GST_DEBUG_CATEGORY_INIT (gst_decode_bin_debug, "decodebin", 0, "decoder bin"); /* Register some quarks here for the stream topology message */ topology_structure_name = g_quark_from_static_string ("stream-topology"); topology_caps = g_quark_from_static_string ("caps"); topology_next = g_quark_from_static_string ("next"); topology_pad = g_quark_from_static_string ("pad"); topology_element_srcpad = g_quark_from_static_string ("element-srcpad"); return gst_element_register (plugin, "decodebin", GST_RANK_NONE, GST_TYPE_DECODE_BIN); }