GNU grep NEWS -*- outline -*- * Noteworthy changes in release ?.? (????-??-??) [?] ** Bug fixes PCRE support is once again detected on systems with [bug introduced in 2.6.2] * Noteworthy changes in release 2.6.2 (2010-03-29) [stable] ** Bug fixes grep -F no longer mistakenly reports a match when searching for an incomplete prefix of a multibyte character. [bug present since "the beginning"] grep -F no longer goes into an infinite loop when it finds a match for an incomplete (non-prefix of a) multibyte character. [bug introduced in 2.6] Using any of the --include or --exclude* options would cause a NULL dereference. [bugs introduced in 2.6] ** Build-related configure no longer relies on pkg-config to detect PCRE support. * Noteworthy changes in release 2.6.1 (2010-03-25) [stable] ** Bug fixes Character classes could cause a segmentation fault if they included a multibyte character. [bug introduced in 2.6] Character ranges would not work in single-byte character sets other than C (for example, ISO-8859-1 or KOI8-R) and some multi-byte locales. For example, this should print "1", but would find no match: $ echo 1 | env -i LC_COLLATE=en_US.UTF-8 grep '[0-9]' [bug introduced in 2.6] The output of grep was incorrect for whole-word (-w) matches if the patterns included a back-reference. [bug introduced in grep-2.5.2] ** Portability Avoid a link failure on Solaris 8. * Noteworthy changes in release 2.6 (2010-03-23) [stable] ** Speed improvements grep is much faster on multibyte character sets, especially (but not limited to) UTF-8 character sets. The speed improvement is also very pronounced with case-insensitive matches. ** Bug fixes Character classes would malfunction in multi-byte locales when using grep -i. Examples which would print nothing for LC_ALL=en_US.UTF-8 include: - for ranges, echo Z | grep -i '[a-z]' - for single characters, echo Y | grep -i '[y]' - for character types, echo Y | grep -i '[[:lower:]]' grep -i -o would fail to report some matches; grep -i --color, while not missing any line containing a match, would fail to color some matches. grep would fail to report a match in a multibyte character set other than UTF-8, if another match occurred earlier in the line but started in the middle of a multibyte character. Various bugs in grep -P, caused by expressions such as [^b] or \S matching newlines, were fixed. grep -P also supports the special sequences \Z and \z, and can be combined with the command-line option -z to perform searches on NUL-separated records. grep would mistakenly exit with status 1 upon error, rather than 2, as it is documented to do. Using options like -1 -2 or -1 -v -2 results in two lines of context (the last value that appears on the command line) instead twelve (the concatenation of all the values). This is consistent with the behavior of options -A/-B/-C. Two new command-line options, --group-separator=ARGUMENT and --no-group-separator, enable further customization of the output when -A, -B or -C is being used. ** Other changes egrep accepts the -E option and fgrep accepts the -F option. If egrep and fgrep are given another of the -E/-F/-G options, they print a more meaningful error message. * Noteworthy changes in release 2.5.4 (2009-02-10) [stable] - This is a bugfix release. No new features. Version 2.5.3 - The new option --exclude-dir allows to specify a directory pattern that will be excluded from recursive grep. - Numerous bug fixes Version 2.5.1 - This is a bugfix release. No new features. Version 2.5 - The new option --label allows to specify a different name for input from stdin. See the man or info pages for details. - The internal lib/getopt* files are no longer used on systems providing getopt functionality in their libc (e.g. glibc 2.2.x). If you need the old getopt files, use --with-included-getopt. - The new option --only-matching (-o) will print only the part of matching lines that matches the pattern. This is useful, for example, to extract IP addresses from log files. - i18n bug fixed ([A-Z0-9] wouldn't match A in locales other than C on systems using recent glibc builds - GNU grep can now be built with autoconf 2.52. - The new option --devices controls how grep handles device files. Its usage is analogous to --directories. - The new option --line-buffered fflush on everyline. There is a noticeable slow down when forcing line buffering. - Back references are now local to the regex. grep -e '\(a\)\1' -e '\(b\)\1' The last backref \1 in the second expression refer to \(b\) - The new option --include=PATTERN will search only matching files when recursing in directories - The new option --exclude=PATTERN will skip matching files when recursing in directories. - The new option --color will use the environment variable GREP_COLOR (default is red) to highlight the matching string. --color takes an optional argument specifying when to colorize a line: --color=always, --color=tty, --color=never - The following changes are for POSIX.2 conformance: . The -q or --quiet or --silent option now causes grep to exit with zero status when a input line is selected, even if an error also occurs. . The -s or --no-messages option no longer affects the exit status. . Bracket regular expressions like [a-z] are now locale-dependent. For example, many locales sort characters in dictionary order, and in these locales the regular expression [a-d] is not equivalent to [abcd]; it might be equivalent to [aBbCcDd], for example. To obtain the traditional interpretation of bracket expressions, you can use the C locale by setting the LC_ALL environment variable to the value "C". - The -C or --context option now requires an argument, partly for consistency, and partly because POSIX.2 recommends against optional arguments. - The new -P or --perl-regexp option tells grep to interpert the pattern as a Perl regular expression. - The new option --max-count=num makes grep stop reading a file after num matching lines. New option -m; equivalent to --max-count. - Translations for bg, ca, da, nb and tr have been added. Version 2.4.2 - Added more check in configure to default the grep-${version}/src/regex.c instead of the one in GNU Lib C. Version 2.4.1 - If the final byte of an input file is not a newline, grep now silently supplies one. - The new option --binary-files=TYPE makes grep assume that a binary input file is of type TYPE. --binary-files='binary' (the default) outputs a 1-line summary of matches. --binary-files='without-match' assumes binary files do not match. --binary-files='text' treats binary files as text (equivalent to the -a or --text option). - New option -I; equivalent to --binary-files='without-match'. Version 2.4: - egrep is now equivalent to `grep -E' as required by POSIX, removing a longstanding source of confusion and incompatibility. `grep' is now more forgiving about stray `{'s, for backward compatibility with traditional egrep. - The lower bound of an interval is not optional. You must use an explicit zero, e.g. `x{0,10}' instead of `x{,10}'. (The old documentation incorrectly claimed that it was optional.) - The --revert-match option has been renamed to --invert-match. - The --fixed-regexp option has been renamed to --fixed-string. - New option -H or --with-filename. - New option --mmap. By default, GNU grep now uses read instead of mmap. This is faster on some hosts, and is safer on all. - The new option -z or --null-data causes `grep' to treat a zero byte (the ASCII NUL character) as a line terminator in input data, and to treat newlines as ordinary data. - The new option -Z or --null causes `grep' to output a zero byte instead of the normal separator after a file name. - These two options can be used with commands like `find -print0', `perl -0', `sort -z', and `xargs -0' to process arbitrary file names, even those that contain newlines. - The environment variable GREP_OPTIONS specifies default options; e.g. GREP_OPTIONS='--directories=skip' reestablishes grep 2.1's behavior of silently skipping directories. - You can specify a matcher multiple times without error, e.g. `grep -E -E' or `fgrep -F'. It is still an error to specify conflicting matchers. - -u and -U are now allowed on non-DOS hosts, and have no effect. - Modifications of the tests scripts to go around the "Broken Pipe" errors from bash. See Bash FAQ. - New option -r or --recursive or --directories=recurse. (This option was also in grep 2.3, but wasn't announced here.) - --without-included-regex disable, was causing bogus reports .i.e doing more harm then good. Version 2.3: - When searching a binary file FOO, grep now just reports `Binary file FOO matches' instead of outputting binary data. This is typically more useful than the old behavior, and it is also more consistent with other utilities like `diff'. A file is considered to be binary if it contains a NUL (i.e. zero) byte. The new -a or --text option causes `grep' to assume that all input is text. (This option has the same meaning as with `diff'.) Use it if you want binary data in your output. - `grep' now searches directories just like ordinary files; it no longer silently skips directories. This is the traditional behavior of Unix text utilities (in particular, of traditional `grep'). Hence `grep PATTERN DIRECTORY' should report `grep: DIRECTORY: Is a directory' on hosts where the operating system does not permit programs to read directories directly, and `grep: DIRECTORY: Binary file matches' (or nothing) otherwise. The new -d ACTION or --directories=ACTION option affects directory handling. `-d skip' causes `grep' to silently skip directories, as in grep 2.1; `-d read' (the default) causes `grep' to read directories if possible, as in earlier versions of grep. - The MS-DOS and Microsoft Windows ports now behave identically to the GNU and Unix ports with respect to binary files and directories. Version 2.2: Bug fix release. - Status error number fix. - Skipping directories removed. - Many typos fix. - -f /dev/null fix(not to consider as an empty pattern). - Checks for wctype/wchar. - -E was using the wrong matcher fix. - bug in regex char class fix - Fixes for DJGPP Version 2.1: This is a bug fix release(see Changelog) i.e. no new features. - More compliance to GNU standard. - Long options. - Internationalisation. - Use automake/autoconf. - Directory hierarchy change. - Sigvec with -e on Linux corrected. - Sigvec with -f on Linux corrected. - Sigvec with the mmap() corrected. - Bug in kwset corrected. - -q, -L and -l stop on first match. - New and improve regex.[ch] from Ulrich Drepper. - New and improve dfa.[ch] from Arnold Robbins. - Prototypes for over zealous C compiler. - Not scanning a file, if it's a directory (cause problems on Sun). - Ported to MS-DOS/MS-Windows with DJGPP tools. See Changelog for the full story and proper credits. Version 2.0: The most important user visible change is that egrep and fgrep have disappeared as separate programs into the single grep program mandated by POSIX 1003.2. New options -G, -E, and -F have been added, selecting grep, egrep, and fgrep behavior respectively. For compatibility with historical practice, hard links named egrep and fgrep are also provided. See the manual page for details. In addition, the regular expression facilities described in Posix draft 11.2 are now supported, except for internationalization features related to locale-dependent collating sequence information. There is a new option, -L, which is like -l except it lists files which don't contain matches. The reason this option was added is because '-l -v' doesn't do what you expect. Performance has been improved; the amount of improvement is platform dependent, but (for example) grep 2.0 typically runs at least 30% faster than grep 1.6 on a DECstation using the MIPS compiler. Where possible, grep now uses mmap() for file input; on a Sun 4 running SunOS 4.1 this may cut system time by as much as half, for a total reduction in running time by nearly 50%. On machines that don't use mmap(), the buffering code has been rewritten to choose more favorable alignments and buffer sizes for read(). Portability has been substantially cleaned up, and an automatic configure script is now provided. The internals have changed in ways too numerous to mention. People brave enough to reuse the DFA matcher in other programs will now have their bravery amply "rewarded", for the interface to that file has been completely changed. Some changes were necessary to track the evolution of the regex package, and since I was changing it anyway I decided to do a general cleanup. ======================================================================== Copyright (C) 1992, 1997-2002, 2004-2010 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the ``GNU Free Documentation License'' file as part of this distribution.