@node gnutls-cli Invocation @section Invoking gnutls-cli @pindex gnutls-cli @cindex GnuTLS client @ignore # -*- buffer-read-only: t -*- vi: set ro: # # DO NOT EDIT THIS FILE (invoke-gnutls-cli.texi) # # It has been AutoGen-ed October 6, 2012 at 03:27:13 AM by AutoGen 5.16 # From the definitions ../src/cli-args.def # and the template file agtexi-cmd.tpl @end ignore Simple client program to set up a TLS connection to some other computer. It sets up a TLS connection and forwards data from the standard input to the secured socket and vice versa. This section was generated by @strong{AutoGen}, using the @code{agtexi-cmd} template and the option descriptions for the @code{gnutls-cli} program. This software is released under the GNU General Public License, version 3 or later. @anchor{gnutls-cli usage} @subheading gnutls-cli help/usage (-h) @cindex gnutls-cli help This is the automatically generated usage text for gnutls-cli. The text printed is the same whether for the @code{help} option (-h) or the @code{more-help} option (-!). @code{more-help} will print the usage text by passing it through a pager program. @code{more-help} is disabled on platforms without a working @code{fork(2)} function. The @code{PAGER} environment variable is used to select the program, defaulting to @file{more}. Both will exit with a status code of 0. @exampleindent 0 @example gnutls-cli - GnuTLS client - Ver. @@VERSION@@ USAGE: gnutls-cli [ - [] | --[@{=| @}] ]... [hostname] -d, --debug=num Enable debugging. - It must be in the range: 0 to 9999 -V, --verbose More verbose output - may appear multiple times --tofu Enable trust on first use authentication - disabled as --no-tofu --dane Enable DANE certificate verification (DNSSEC) - disabled as --no-dane --ocsp Enable OCSP certificate verification - disabled as --no-ocsp -r, --resume Establish a session and resume -b, --heartbeat Activate heartbeat support -e, --rehandshake Establish a session and rehandshake --noticket Don't accept session tickets --ocsp-status-request Enable OCSP status request - disabled as --no-ocsp-status-request - enabled by default -s, --starttls Connect, establish a plain session and start TLS. -u, --udp Use DTLS (datagram TLS) over UDP --mtu=num Set MTU for datagram TLS - It must be in the range: 0 to 17000 --crlf Send CR LF instead of LF --x509fmtder Use DER format for certificates to read from -f, --fingerprint Send the openpgp fingerprint, instead of the key --disable-extensions Disable all the TLS extensions --print-cert Print peer's certificate in PEM format --recordsize=num The maximum record size to advertize - It must be in the range: 0 to 4096 --dh-bits=num The minimum number of bits allowed for DH --priority=str Priorities string --x509cafile=str Certificate file or PKCS #11 URL to use --x509crlfile=file CRL file to use - file must pre-exist --pgpkeyfile=file PGP Key file to use - file must pre-exist --pgpkeyring=file PGP Key ring file to use - file must pre-exist --pgpcertfile=file PGP Public Key (certificate) file to use - file must pre-exist --x509keyfile=str X.509 key file or PKCS #11 URL to use --x509certfile=str X.509 Certificate file or PKCS #11 URL to use --pgpsubkey=str PGP subkey to use (hex or auto) --srpusername=str SRP username to use --srppasswd=str SRP password to use --pskusername=str PSK username to use --pskkey=str PSK key (in hex) to use -p, --port=str The port or service to connect to --insecure Don't abort program if server certificate can't be validated --benchmark-ciphers Benchmark individual ciphers --benchmark-soft-ciphers Benchmark individual software ciphers (no hw acceleration) --benchmark-tls-kx Benchmark TLS key exchange methods --benchmark-tls-ciphers Benchmark TLS ciphers -l, --list Print a list of the supported algorithms and modes -v, --version[=arg] Output version information and exit -h, --help Display extended usage information and exit -!, --more-help Extended usage information passed thru pager Options are specified by doubled hyphens and their name or by a single hyphen and the flag character. Operands and options may be intermixed. They will be reordered. Simple client program to set up a TLS connection to some other computer. It sets up a TLS connection and forwards data from the standard input to the secured socket and vice versa. please send bug reports to: bug-gnutls@@gnu.org @end example @exampleindent 4 @anchor{gnutls-cli debug} @subheading debug option (-d) @cindex gnutls-cli-debug This is the ``enable debugging.'' option. This option takes an argument number. Specifies the debug level. @anchor{gnutls-cli tofu} @subheading tofu option @cindex gnutls-cli-tofu This is the ``enable trust on first use authentication'' option. This option will, in addition to certificate authentication, perform authentication based on previously seen public keys, a model similar to SSH authentication. @anchor{gnutls-cli dane} @subheading dane option @cindex gnutls-cli-dane This is the ``enable dane certificate verification (dnssec)'' option. This option will, in addition to certificate authentication using the trusted CAs, verify the server certificates using on the DANE information available via DNSSEC. @anchor{gnutls-cli ocsp} @subheading ocsp option @cindex gnutls-cli-ocsp This is the ``enable ocsp certificate verification'' option. This option will enable verification of the peer's certificate using ocsp @anchor{gnutls-cli resume} @subheading resume option (-r) @cindex gnutls-cli-resume This is the ``establish a session and resume'' option. Connect, establish a session, reconnect and resume. @anchor{gnutls-cli rehandshake} @subheading rehandshake option (-e) @cindex gnutls-cli-rehandshake This is the ``establish a session and rehandshake'' option. Connect, establish a session and rehandshake immediately. @anchor{gnutls-cli ocsp-status-request} @subheading ocsp-status-request option @cindex gnutls-cli-ocsp-status-request This is the ``enable ocsp status request'' option. @noindent This option has some usage constraints. It: @itemize @bullet @item is enabled by default. @end itemize The client will indicate to the server in a TLS extension that it wants a OCSP status request. @anchor{gnutls-cli starttls} @subheading starttls option (-s) @cindex gnutls-cli-starttls This is the ``connect, establish a plain session and start tls.'' option. The TLS session will be initiated when EOF or a SIGALRM is received. @anchor{gnutls-cli dh-bits} @subheading dh-bits option @cindex gnutls-cli-dh-bits This is the ``the minimum number of bits allowed for dh'' option. This option takes an argument number. This option sets the minimum number of bits allowed for a Diffie-Hellman key exchange. You may want to lower the default value if the peer sends a weak prime and you get an connection error with unacceptable prime. @anchor{gnutls-cli priority} @subheading priority option @cindex gnutls-cli-priority This is the ``priorities string'' option. This option takes an argument string. TLS algorithms and protocols to enable. You can use predefined sets of ciphersuites such as PERFORMANCE, NORMAL, SECURE128, SECURE256. Check the GnuTLS manual on section ``Priority strings'' for more information on allowed keywords @anchor{gnutls-cli list} @subheading list option (-l) @cindex gnutls-cli-list This is the ``print a list of the supported algorithms and modes'' option. Print a list of the supported algorithms and modes. If a priority string is given then only the enabled ciphersuites are shown. @anchor{gnutls-cli exit status} @subheading gnutls-cli exit status One of the following exit values will be returned: @table @samp @item 0 (EXIT_SUCCESS) Successful program execution. @item 1 (EXIT_FAILURE) The operation failed or the command syntax was not valid. @end table @anchor{gnutls-cli See Also} @subheading gnutls-cli See Also gnutls-cli-debug(1), gnutls-serv(1) @anchor{gnutls-cli Examples} @subheading gnutls-cli Examples @subheading Connecting using PSK authentication To connect to a server using PSK authentication, you need to enable the choice of PSK by using a cipher priority parameter such as in the example below. @example $ ./gnutls-cli -p 5556 localhost --pskusername psk_identity \ --pskkey 88f3824b3e5659f52d00e959bacab954b6540344 \ --priority NORMAL:-KX-ALL:+ECDHE-PSK:+DHE-PSK:+PSK Resolving 'localhost'... Connecting to '127.0.0.1:5556'... - PSK authentication. - Version: TLS1.1 - Key Exchange: PSK - Cipher: AES-128-CBC - MAC: SHA1 - Compression: NULL - Handshake was completed - Simple Client Mode: @end example By keeping the --pskusername parameter and removing the --pskkey parameter, it will query only for the password during the handshake. @subheading Listing ciphersuites in a priority string To list the ciphersuites in a priority string: @example $ ./gnutls-cli --priority SECURE192 -l Cipher suites for SECURE192 TLS_ECDHE_ECDSA_AES_256_CBC_SHA384 0xc0, 0x24 TLS1.2 TLS_ECDHE_ECDSA_AES_256_GCM_SHA384 0xc0, 0x2e TLS1.2 TLS_ECDHE_RSA_AES_256_GCM_SHA384 0xc0, 0x30 TLS1.2 TLS_DHE_RSA_AES_256_CBC_SHA256 0x00, 0x6b TLS1.2 TLS_DHE_DSS_AES_256_CBC_SHA256 0x00, 0x6a TLS1.2 TLS_RSA_AES_256_CBC_SHA256 0x00, 0x3d TLS1.2 Certificate types: CTYPE-X.509 Protocols: VERS-TLS1.2, VERS-TLS1.1, VERS-TLS1.0, VERS-SSL3.0, VERS-DTLS1.0 Compression: COMP-NULL Elliptic curves: CURVE-SECP384R1, CURVE-SECP521R1 PK-signatures: SIGN-RSA-SHA384, SIGN-ECDSA-SHA384, SIGN-RSA-SHA512, SIGN-ECDSA-SHA512 @end example