/* longlong.h -- definitions for mixed size 32/64 bit arithmetic. Copyright 1991, 1992, 1993, 1994, 1996, 1997, 1999, 2000, 2001 Free Software Foundation, Inc. This file is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this file; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* You have to define the following before including this file: UWtype -- An unsigned type, default type for operations (typically a "word") UHWtype -- An unsigned type, at least half the size of UWtype. UDWtype -- An unsigned type, at least twice as large a UWtype W_TYPE_SIZE -- size in bits of UWtype SItype, USItype -- Signed and unsigned 32 bit types. DItype, UDItype -- Signed and unsigned 64 bit types. On a 32 bit machine UWtype should typically be USItype; on a 64 bit machine, UWtype should typically be UDItype. */ #define __BITS4 (W_TYPE_SIZE / 4) #define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) #define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) #define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) /* This is used to make sure no undesirable sharing between different libraries that use this file takes place. */ #ifndef __MPN #define __MPN(x) __##x #endif #ifndef _PROTO #if (__STDC__-0) || defined (__cplusplus) #define _PROTO(x) x #else #define _PROTO(x) () #endif #endif /* Define auxiliary asm macros. 1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype word product in HIGH_PROD and LOW_PROD. 2) __umulsidi3(a,b) multiplies two UWtype integers A and B, and returns a UDWtype product. This is just a variant of umul_ppmm. 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, denominator) divides a UDWtype, composed by the UWtype integers HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient in QUOTIENT and the remainder in REMAINDER. HIGH_NUMERATOR must be less than DENOMINATOR for correct operation. If, in addition, the most significant bit of DENOMINATOR must be 1, then the pre-processor symbol UDIV_NEEDS_NORMALIZATION is defined to 1. 4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator, denominator). Like udiv_qrnnd but the numbers are signed. The quotient is rounded towards 0. 5) count_leading_zeros(count, x) counts the number of zero-bits from the msb to the first non-zero bit in the UWtype X. This is the number of steps X needs to be shifted left to set the msb. Undefined for X == 0, unless the symbol COUNT_LEADING_ZEROS_0 is defined to some value. 6) count_trailing_zeros(count, x) like count_leading_zeros, but counts from the least significant end. 7) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1, high_addend_2, low_addend_2) adds two UWtype integers, composed by HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2 respectively. The result is placed in HIGH_SUM and LOW_SUM. Overflow (i.e. carry out) is not stored anywhere, and is lost. 8) sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend, high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers, composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and LOW_SUBTRAHEND_2 respectively. The result is placed in HIGH_DIFFERENCE and LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere, and is lost. If any of these macros are left undefined for a particular CPU, C macros are used. */ /* The CPUs come in alphabetical order below. Please add support for more CPUs here, or improve the current support for the CPUs below! */ /* FIXME: The macros using external routines like __MPN(count_leading_zeros) don't need to be under !NO_ASM */ #if ! defined (NO_ASM) #if defined (__alpha) && W_TYPE_SIZE == 64 /* Most alpha-based machines, except Cray systems. */ #if defined (__GNUC__) #define umul_ppmm(ph, pl, m0, m1) \ do { \ UDItype __m0 = (m0), __m1 = (m1); \ __asm__ ("umulh %r1,%2,%0" \ : "=r" (ph) \ : "%rJ" (m0), "rI" (m1)); \ (pl) = __m0 * __m1; \ } while (0) #define UMUL_TIME 18 #else /* ! __GNUC__ */ #include #define umul_ppmm(ph, pl, m0, m1) \ do { \ UDItype __m0 = (m0), __m1 = (m1); \ (ph) = __UMULH (m0, m1); \ (pl) = __m0 * __m1; \ } while (0) #endif #ifndef LONGLONG_STANDALONE #define udiv_qrnnd(q, r, n1, n0, d) \ do { UWtype __di; \ __di = __MPN(invert_limb) (d); \ udiv_qrnnd_preinv (q, r, n1, n0, d, __di); \ } while (0) #define UDIV_PREINV_ALWAYS 1 #define UDIV_NEEDS_NORMALIZATION 1 #define UDIV_TIME 220 #if HAVE_ATTRIBUTE_CONST long __MPN(count_leading_zeros) _PROTO ((UDItype)) __attribute__ ((const)); #else long __MPN(count_leading_zeros) _PROTO ((UDItype)); #endif #define count_leading_zeros(count, x) \ ((count) = __MPN(count_leading_zeros) (x)) #define COUNT_LEADING_ZEROS_NEED_CLZ_TAB #endif /* LONGLONG_STANDALONE */ #endif /* __alpha */ #if defined (_CRAY) && W_TYPE_SIZE == 64 #include #define UDIV_PREINV_ALWAYS 1 #define UDIV_NEEDS_NORMALIZATION 1 #define UDIV_TIME 220 long __MPN(count_leading_zeros) _PROTO ((UDItype)); #define count_leading_zeros(count, x) \ ((count) = _leadz ((UWtype) (x))) #if defined (_CRAYIEEE) /* I.e., Cray T90/ieee, T3D, and T3E */ #define umul_ppmm(ph, pl, m0, m1) \ do { \ UDItype __m0 = (m0), __m1 = (m1); \ (ph) = _int_mult_upper (m0, m1); \ (pl) = __m0 * __m1; \ } while (0) #ifndef LONGLONG_STANDALONE #define udiv_qrnnd(q, r, n1, n0, d) \ do { UWtype __di; \ __di = __MPN(invert_limb) (d); \ udiv_qrnnd_preinv (q, r, n1, n0, d, __di); \ } while (0) #endif /* LONGLONG_STANDALONE */ #endif /* _CRAYIEEE */ #endif /* _CRAY */ #if defined (__hppa) && W_TYPE_SIZE == 64 #if defined (__GNUC__) #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("add %4,%5,%1\n\tadd,dc %2,%3,%0" \ : "=r" (sh), "=&r" (sl) \ : "%rM" (ah), "rM" (bh), "%rM" (al), "rM" (bl)) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("sub %4,%5,%1\n\tsub,db %2,%3,%0" \ : "=r" (sh), "=&r" (sl) \ : "rM" (ah), "rM" (bh), "rM" (al), "rM" (bl)) #endif /* We put the result pointer parameter last here, since it makes passing of the other parameters more efficient. */ #ifndef LONGLONG_STANDALONE #define umul_ppmm(wh, wl, u, v) \ do { \ UWtype __p0; \ (wh) = __MPN(umul_ppmm) (u, v, &__p0); \ (wl) = __p0; \ } while (0) extern UWtype __MPN(umul_ppmm) _PROTO ((UWtype, UWtype, UWtype *)); #define udiv_qrnnd(q, r, n1, n0, d) \ do { UWtype __r; \ (q) = __MPN(udiv_qrnnd) (n1, n0, d, &__r); \ (r) = __r; \ } while (0) extern UWtype __MPN(udiv_qrnnd) _PROTO ((UWtype, UWtype, UWtype, UWtype *)); #define UMUL_TIME 8 #define UDIV_TIME 60 #endif /* LONGLONG_STANDALONE */ #endif /* hppa */ #if defined (__ia64) && W_TYPE_SIZE == 64 #if defined (__GNUC__) #define umul_ppmm(ph, pl, m0, m1) \ do { \ UDItype __m0 = (m0), __m1 = (m1); \ __asm__ ("xma.hu %0 = %1, %2, f0" \ : "=f" (ph) \ : "f" (m0), "f" (m1)); \ (pl) = __m0 * __m1; \ } while (0) #define UMUL_TIME 14 #define count_leading_zeros(count, x) \ do { \ UWtype _x = (x), _y, _a, _c; \ __asm__ ("mux1 %0 = %1, @rev" : "=r" (_y) : "r" (_x)); \ __asm__ ("czx1.l %0 = %1" : "=r" (_a) : "r" (-_y | _y)); \ _c = (_a - 1) << 3; \ _x >>= _c; \ if (_x >= 1 << 4) \ _x >>= 4, _c += 4; \ if (_x >= 1 << 2) \ _x >>= 2, _c += 2; \ _c += _x >> 1; \ (count) = W_TYPE_SIZE - 1 - _c; \ } while (0) #endif #ifndef LONGLONG_STANDALONE #define udiv_qrnnd(q, r, n1, n0, d) \ do { UWtype __di; \ __di = __MPN(invert_limb) (d); \ udiv_qrnnd_preinv (q, r, n1, n0, d, __di); \ } while (0) #define UDIV_PREINV_ALWAYS 1 #define UDIV_NEEDS_NORMALIZATION 1 #endif #define UDIV_TIME 220 #endif #if defined (__GNUC__) /* We sometimes need to clobber "cc" with gcc2, but that would not be understood by gcc1. Use cpp to avoid major code duplication. */ #if __GNUC__ < 2 #define __CLOBBER_CC #define __AND_CLOBBER_CC #else /* __GNUC__ >= 2 */ #define __CLOBBER_CC : "cc" #define __AND_CLOBBER_CC , "cc" #endif /* __GNUC__ < 2 */ #if (defined (__a29k__) || defined (_AM29K)) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("add %1,%4,%5\n\taddc %0,%2,%3" \ : "=r" (sh), "=&r" (sl) \ : "%r" (ah), "rI" (bh), "%r" (al), "rI" (bl)) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("sub %1,%4,%5\n\tsubc %0,%2,%3" \ : "=r" (sh), "=&r" (sl) \ : "r" (ah), "rI" (bh), "r" (al), "rI" (bl)) #define umul_ppmm(xh, xl, m0, m1) \ do { \ USItype __m0 = (m0), __m1 = (m1); \ __asm__ ("multiplu %0,%1,%2" \ : "=r" (xl) \ : "r" (__m0), "r" (__m1)); \ __asm__ ("multmu %0,%1,%2" \ : "=r" (xh) \ : "r" (__m0), "r" (__m1)); \ } while (0) #define udiv_qrnnd(q, r, n1, n0, d) \ __asm__ ("dividu %0,%3,%4" \ : "=r" (q), "=q" (r) \ : "1" (n1), "r" (n0), "r" (d)) #define count_leading_zeros(count, x) \ __asm__ ("clz %0,%1" \ : "=r" (count) \ : "r" (x)) #define COUNT_LEADING_ZEROS_0 32 #endif /* __a29k__ */ #if defined (__arc__) #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("add.f\t%1, %4, %5\n\tadc\t%0, %2, %3" \ : "=r" ((USItype) (sh)), \ "=&r" ((USItype) (sl)) \ : "%r" ((USItype) (ah)), \ "rIJ" ((USItype) (bh)), \ "%r" ((USItype) (al)), \ "rIJ" ((USItype) (bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("sub.f\t%1, %4, %5\n\tsbc\t%0, %2, %3" \ : "=r" ((USItype) (sh)), \ "=&r" ((USItype) (sl)) \ : "r" ((USItype) (ah)), \ "rIJ" ((USItype) (bh)), \ "r" ((USItype) (al)), \ "rIJ" ((USItype) (bl))) #endif #if defined (__arm__) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("adds\t%1, %4, %5\n\tadc\t%0, %2, %3" \ : "=r" (sh), "=&r" (sl) \ : "%r" (ah), "rI" (bh), "%r" (al), "rI" (bl) __CLOBBER_CC) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ do { \ if (__builtin_constant_p (al)) \ { \ if (__builtin_constant_p (ah)) \ __asm__ ("rsbs\t%1, %5, %4\n\trsc\t%0, %3, %2" \ : "=r" (sh), "=&r" (sl) \ : "rI" (ah), "r" (bh), "rI" (al), "r" (bl) __CLOBBER_CC); \ else \ __asm__ ("rsbs\t%1, %5, %4\n\tsbc\t%0, %2, %3" \ : "=r" (sh), "=&r" (sl) \ : "r" (ah), "rI" (bh), "rI" (al), "r" (bl) __CLOBBER_CC); \ } \ else if (__builtin_constant_p (ah)) \ { \ if (__builtin_constant_p (bl)) \ __asm__ ("subs\t%1, %4, %5\n\trsc\t%0, %3, %2" \ : "=r" (sh), "=&r" (sl) \ : "rI" (ah), "r" (bh), "r" (al), "rI" (bl) __CLOBBER_CC); \ else \ __asm__ ("rsbs\t%1, %5, %4\n\trsc\t%0, %3, %2" \ : "=r" (sh), "=&r" (sl) \ : "rI" (ah), "r" (bh), "rI" (al), "r" (bl) __CLOBBER_CC); \ } \ else if (__builtin_constant_p (bl)) \ { \ if (__builtin_constant_p (bh)) \ __asm__ ("subs\t%1, %4, %5\n\tsbc\t%0, %2, %3" \ : "=r" (sh), "=&r" (sl) \ : "r" (ah), "rI" (bh), "r" (al), "rI" (bl) __CLOBBER_CC); \ else \ __asm__ ("subs\t%1, %4, %5\n\trsc\t%0, %3, %2" \ : "=r" (sh), "=&r" (sl) \ : "rI" (ah), "r" (bh), "r" (al), "rI" (bl) __CLOBBER_CC); \ } \ else /* only bh might be a constant */ \ __asm__ ("subs\t%1, %4, %5\n\tsbc\t%0, %2, %3" \ : "=r" (sh), "=&r" (sl) \ : "r" (ah), "rI" (bh), "r" (al), "rI" (bl) __CLOBBER_CC);\ } while (0) #if 1 || defined (__arm_m__) /* `M' series has widening multiply support */ #define umul_ppmm(xh, xl, a, b) \ __asm__ ("umull %0,%1,%2,%3" : "=&r" (xl), "=&r" (xh) : "r" (a), "r" (b)) #define UMUL_TIME 5 #define smul_ppmm(xh, xl, a, b) \ __asm__ ("smull %0,%1,%2,%3" : "=&r" (xl), "=&r" (xh) : "r" (a), "r" (b)) #ifndef LONGLONG_STANDALONE #define udiv_qrnnd(q, r, n1, n0, d) \ do { UWtype __di; \ __di = __MPN(invert_limb) (d); \ udiv_qrnnd_preinv (q, r, n1, n0, d, __di); \ } while (0) #define UDIV_PREINV_ALWAYS 1 #define UDIV_NEEDS_NORMALIZATION 1 #define UDIV_TIME 70 #endif /* LONGLONG_STANDALONE */ #else #define umul_ppmm(xh, xl, a, b) \ __asm__ ("%@ Inlined umul_ppmm\n" \ " mov %|r0, %2, lsr #16\n" \ " mov %|r2, %3, lsr #16\n" \ " bic %|r1, %2, %|r0, lsl #16\n" \ " bic %|r2, %3, %|r2, lsl #16\n" \ " mul %1, %|r1, %|r2\n" \ " mul %|r2, %|r0, %|r2\n" \ " mul %|r1, %0, %|r1\n" \ " mul %0, %|r0, %0\n" \ " adds %|r1, %|r2, %|r1\n" \ " addcs %0, %0, #65536\n" \ " adds %1, %1, %|r1, lsl #16\n" \ " adc %0, %0, %|r1, lsr #16" \ : "=&r" (xh), "=r" (xl) \ : "r" (a), "r" (b) \ : "r0", "r1", "r2") #define UMUL_TIME 20 #ifndef LONGLONG_STANDALONE #define udiv_qrnnd(q, r, n1, n0, d) \ do { UWtype __r; \ (q) = __MPN(udiv_qrnnd) (&__r, (n1), (n0), (d)); \ (r) = __r; \ } while (0) extern UWtype __MPN(udiv_qrnnd) _PROTO ((UWtype *, UWtype, UWtype, UWtype)); #define UDIV_TIME 200 #endif /* LONGLONG_STANDALONE */ #endif #endif /* __arm__ */ #if defined (__clipper__) && W_TYPE_SIZE == 32 #define umul_ppmm(w1, w0, u, v) \ ({union {UDItype __ll; \ struct {USItype __l, __h;} __i; \ } __x; \ __asm__ ("mulwux %2,%0" \ : "=r" (__x.__ll) \ : "%0" ((USItype)(u)), "r" ((USItype)(v))); \ (w1) = __x.__i.__h; (w0) = __x.__i.__l;}) #define smul_ppmm(w1, w0, u, v) \ ({union {DItype __ll; \ struct {SItype __l, __h;} __i; \ } __x; \ __asm__ ("mulwx %2,%0" \ : "=r" (__x.__ll) \ : "%0" ((SItype)(u)), "r" ((SItype)(v))); \ (w1) = __x.__i.__h; (w0) = __x.__i.__l;}) #define __umulsidi3(u, v) \ ({UDItype __w; \ __asm__ ("mulwux %2,%0" \ : "=r" (__w) : "%0" ((USItype)(u)), "r" ((USItype)(v))); \ __w; }) #endif /* __clipper__ */ /* Fujitsu vector computers. */ #if defined (__uxp__) && W_TYPE_SIZE == 32 #define umul_ppmm(ph, pl, u, v) \ do { \ union {UDItype __ll; \ struct {USItype __h, __l;} __i; \ } __x; \ __asm__ ("mult.lu %1,%2,%0" : "=r" (__x.__ll) : "%r" (u), "rK" (v));\ (ph) = __x.__i.__h; \ (pl) = __x.__i.__l; \ } while (0) #define smul_ppmm(ph, pl, u, v) \ do { \ union {UDItype __ll; \ struct {USItype __h, __l;} __i; \ } __x; \ __asm__ ("mult.l %1,%2,%0" : "=r" (__x.__ll) : "%r" (u), "rK" (v)); \ (ph) = __x.__i.__h; \ (pl) = __x.__i.__l; \ } while (0) #endif #if defined (__gmicro__) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("add.w %5,%1\n\taddx %3,%0" \ : "=g" ((USItype)(sh)), "=&g" ((USItype)(sl)) \ : "%0" ((USItype)(ah)), "g" ((USItype)(bh)), \ "%1" ((USItype)(al)), "g" ((USItype)(bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("sub.w %5,%1\n\tsubx %3,%0" \ : "=g" ((USItype)(sh)), "=&g" ((USItype)(sl)) \ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \ "1" ((USItype)(al)), "g" ((USItype)(bl))) #define umul_ppmm(ph, pl, m0, m1) \ __asm__ ("mulx %3,%0,%1" \ : "=g" ((USItype)(ph)), "=r" ((USItype)(pl)) \ : "%0" ((USItype)(m0)), "g" ((USItype)(m1))) #define udiv_qrnnd(q, r, nh, nl, d) \ __asm__ ("divx %4,%0,%1" \ : "=g" ((USItype)(q)), "=r" ((USItype)(r)) \ : "1" ((USItype)(nh)), "0" ((USItype)(nl)), "g" ((USItype)(d))) #define count_leading_zeros(count, x) \ __asm__ ("bsch/1 %1,%0" \ : "=g" (count) : "g" ((USItype)(x)), "0" ((USItype)0)) #endif #if defined (__hppa) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("add %4,%5,%1\n\taddc %2,%3,%0" \ : "=r" (sh), "=&r" (sl) \ : "%rM" (ah), "rM" (bh), "%rM" (al), "rM" (bl)) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("sub %4,%5,%1\n\tsubb %2,%3,%0" \ : "=r" (sh), "=&r" (sl) \ : "rM" (ah), "rM" (bh), "rM" (al), "rM" (bl)) #if defined (_PA_RISC1_1) #define umul_ppmm(wh, wl, u, v) \ do { \ union {UDItype __ll; \ struct {USItype __h, __l;} __i; \ } __x; \ __asm__ ("xmpyu %1,%2,%0" : "=*f" (__x.__ll) : "*f" (u), "*f" (v)); \ (wh) = __x.__i.__h; \ (wl) = __x.__i.__l; \ } while (0) #define UMUL_TIME 8 #define UDIV_TIME 60 #else #define UMUL_TIME 40 #define UDIV_TIME 80 #endif #ifndef LONGLONG_STANDALONE #define udiv_qrnnd(q, r, n1, n0, d) \ do { UWtype __r; \ (q) = __MPN(udiv_qrnnd) (&__r, (n1), (n0), (d)); \ (r) = __r; \ } while (0) extern UWtype __MPN(udiv_qrnnd) _PROTO ((UWtype *, UWtype, UWtype, UWtype)); #endif /* LONGLONG_STANDALONE */ #define count_leading_zeros(count, x) \ do { \ USItype __tmp; \ __asm__ ( \ "ldi 1,%0\n" \ " extru,= %1,15,16,%%r0 ; Bits 31..16 zero?\n" \ " extru,tr %1,15,16,%1 ; No. Shift down, skip add.\n" \ " ldo 16(%0),%0 ; Yes. Perform add.\n" \ " extru,= %1,23,8,%%r0 ; Bits 15..8 zero?\n" \ " extru,tr %1,23,8,%1 ; No. Shift down, skip add.\n" \ " ldo 8(%0),%0 ; Yes. Perform add.\n" \ " extru,= %1,27,4,%%r0 ; Bits 7..4 zero?\n" \ " extru,tr %1,27,4,%1 ; No. Shift down, skip add.\n" \ " ldo 4(%0),%0 ; Yes. Perform add.\n" \ " extru,= %1,29,2,%%r0 ; Bits 3..2 zero?\n" \ " extru,tr %1,29,2,%1 ; No. Shift down, skip add.\n" \ " ldo 2(%0),%0 ; Yes. Perform add.\n" \ " extru %1,30,1,%1 ; Extract bit 1.\n" \ " sub %0,%1,%0 ; Subtract it.\n" \ : "=r" (count), "=r" (__tmp) : "1" (x)); \ } while (0) #endif /* hppa */ #if (defined (__i370__) || defined (__s390__) || defined (__mvs__)) && W_TYPE_SIZE == 32 #define smul_ppmm(xh, xl, m0, m1) \ do { \ union {DItype __ll; \ struct {USItype __h, __l;} __i; \ } __x; \ __asm__ ("lr %N0,%1\n\tmr %0,%2" \ : "=&r" (__x.__ll) \ : "r" (m0), "r" (m1)); \ (xh) = __x.__i.__h; (xl) = __x.__i.__l; \ } while (0) #define sdiv_qrnnd(q, r, n1, n0, d) \ do { \ union {DItype __ll; \ struct {USItype __h, __l;} __i; \ } __x; \ __x.__i.__h = n1; __x.__i.__l = n0; \ __asm__ ("dr %0,%2" \ : "=r" (__x.__ll) \ : "0" (__x.__ll), "r" (d)); \ (q) = __x.__i.__l; (r) = __x.__i.__h; \ } while (0) #endif #if (defined (__i386__) || defined (__i486__)) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("addl %5,%1\n\tadcl %3,%0" \ : "=r" ((USItype)(sh)), "=&r" ((USItype)(sl)) \ : "%0" ((USItype)(ah)), "g" ((USItype)(bh)), \ "%1" ((USItype)(al)), "g" ((USItype)(bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("subl %5,%1\n\tsbbl %3,%0" \ : "=r" ((USItype)(sh)), "=&r" ((USItype)(sl)) \ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \ "1" ((USItype)(al)), "g" ((USItype)(bl))) #define umul_ppmm(w1, w0, u, v) \ __asm__ ("mull %3" \ : "=a" (w0), "=d" (w1) \ : "%0" ((USItype)(u)), "rm" ((USItype)(v))) #define udiv_qrnnd(q, r, n1, n0, dx) /* d renamed to dx avoiding "=d" */\ __asm__ ("divl %4" /* stringification in K&R C */ \ : "=a" (q), "=d" (r) \ : "0" ((USItype)(n0)), "1" ((USItype)(n1)), "rm" ((USItype)(dx))) /* P5 bsrl takes between 10 and 72 cycles depending where the most significant 1 bit is, hence the use of the alternatives below. bsfl is slow too, between 18 and 42 depending where the least significant 1 bit is. The faster count_leading_zeros are pressed into service via the generic count_trailing_zeros at the end of the file. */ #if HAVE_HOST_CPU_i586 || HAVE_HOST_CPU_pentium /* The following should be a fixed 14 cycles or so. Some scheduling opportunities should be available between the float load/store too. This is used (with "n&-n" to get trailing zeros) in gcc 3 for __builtin_ffs and is apparently suggested by the Intel optimizing manual (don't know exactly where). gcc 2.95 or up will be best for this, so the "double" is correctly aligned on the stack. */ #define count_leading_zeros(c,n) \ do { \ union { \ double d; \ unsigned a[2]; \ } __u; \ ASSERT ((n) != 0); \ __u.d = (UWtype) (n); \ (c) = 0x3FF + 31 - (__u.a[1] >> 20); \ } while (0) #define COUNT_LEADING_ZEROS_0 (0x3FF + 31) #else /* ! pentium */ #if HAVE_HOST_CPU_pentiummmx /* The following should be a fixed 14 or 15 cycles, but possibly plus an L1 cache miss reading from __clz_tab. It's favoured over the float above so as to avoid mixing MMX and x87, since the penalty for switching between the two is about 100 cycles. The asm block sets __shift to -3 if the high 24 bits are clear, -2 for 16, -1 for 8, or 0 otherwise. This could be written equivalently as follows, but as of gcc 2.95.2 it results in conditional jumps. __shift = -(__n < 0x1000000); __shift -= (__n < 0x10000); __shift -= (__n < 0x100); The middle two sbbl and cmpl's pair, and with luck something gcc generates might pair with the first cmpl and the last sbbl. The "32+1" constant could be folded into __clz_tab[], but it doesn't seem worth making a different table just for that. */ #define count_leading_zeros(c,n) \ do { \ USItype __n = (n); \ USItype __shift; \ __asm__ ("cmpl $0x1000000, %1\n" \ "sbbl %0, %0\n" \ "cmpl $0x10000, %1\n" \ "sbbl $0, %0\n" \ "cmpl $0x100, %1\n" \ "sbbl $0, %0\n" \ : "=&r" (__shift) : "r" (__n)); \ __shift = __shift*8 + 24 + 1; \ (c) = 32 + 1 - __shift - __clz_tab[__n >> __shift]; \ } while (0) #define COUNT_LEADING_ZEROS_NEED_CLZ_TAB #define COUNT_LEADING_ZEROS_0 31 /* n==0 indistinguishable from n==1 */ #else /* !pentiummmx */ /* On P6, gcc prior to 3.0 generates a partial register stall for __cbtmp^31, due to using "xorb $31" instead of "xorl $31", the former being 1 code byte smaller. "31-__cbtmp" is a workaround, probably at the cost of one extra instruction. Do this for "i386" too, since that means generic x86. */ #if __GNUC__ < 3 \ && (HAVE_HOST_CPU_i386 || HAVE_HOST_CPU_pentiumpro \ || HAVE_HOST_CPU_pentium2 || HAVE_HOST_CPU_pentium3) #define count_leading_zeros(count, x) \ do { \ USItype __cbtmp; \ ASSERT ((x) != 0); \ __asm__ ("bsrl %1,%0" : "=r" (__cbtmp) : "rm" ((USItype)(x))); \ (count) = 31 - __cbtmp; \ } while (0) #else #define count_leading_zeros(count, x) \ do { \ USItype __cbtmp; \ ASSERT ((x) != 0); \ __asm__ ("bsrl %1,%0" : "=r" (__cbtmp) : "rm" ((USItype)(x))); \ (count) = __cbtmp ^ 31; \ } while (0) #endif #define count_trailing_zeros(count, x) \ do { \ ASSERT ((x) != 0); \ __asm__ ("bsfl %1,%0" : "=r" (count) : "rm" ((USItype)(x))); \ } while (0) #endif /* ! pentiummmx */ #endif /* ! pentium */ #ifndef UMUL_TIME #define UMUL_TIME 10 #endif #ifndef UDIV_TIME #define UDIV_TIME 40 #endif #endif /* 80x86 */ #if defined (__i860__) && W_TYPE_SIZE == 32 #define rshift_rhlc(r,h,l,c) \ __asm__ ("shr %3,r0,r0\;shrd %1,%2,%0" \ "=r" (r) : "r" (h), "r" (l), "rn" (c)) #endif /* i860 */ #if defined (__i960__) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("cmpo 1,0\;addc %5,%4,%1\;addc %3,%2,%0" \ : "=r" (sh), "=&r" (sl) \ : "%dI" (ah), "dI" (bh), "%dI" (al), "dI" (bl)) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("cmpo 0,0\;subc %5,%4,%1\;subc %3,%2,%0" \ : "=r" (sh), "=&r" (sl) \ : "dI" (ah), "dI" (bh), "dI" (al), "dI" (bl)) #define umul_ppmm(w1, w0, u, v) \ ({union {UDItype __ll; \ struct {USItype __l, __h;} __i; \ } __x; \ __asm__ ("emul %2,%1,%0" \ : "=d" (__x.__ll) : "%dI" (u), "dI" (v)); \ (w1) = __x.__i.__h; (w0) = __x.__i.__l;}) #define __umulsidi3(u, v) \ ({UDItype __w; \ __asm__ ("emul %2,%1,%0" : "=d" (__w) : "%dI" (u), "dI" (v)); \ __w; }) #define udiv_qrnnd(q, r, nh, nl, d) \ do { \ union {UDItype __ll; \ struct {USItype __l, __h;} __i; \ } __nn; \ __nn.__i.__h = (nh); __nn.__i.__l = (nl); \ __asm__ ("ediv %d,%n,%0" \ : "=d" (__rq.__ll) : "dI" (__nn.__ll), "dI" (d)); \ (r) = __rq.__i.__l; (q) = __rq.__i.__h; \ } while (0) #define count_leading_zeros(count, x) \ do { \ USItype __cbtmp; \ __asm__ ("scanbit %1,%0" : "=r" (__cbtmp) : "r" (x)); \ (count) = __cbtmp ^ 31; \ } while (0) #define COUNT_LEADING_ZEROS_0 (-32) /* sic */ #if defined (__i960mx) /* what is the proper symbol to test??? */ #define rshift_rhlc(r,h,l,c) \ do { \ union {UDItype __ll; \ struct {USItype __l, __h;} __i; \ } __nn; \ __nn.__i.__h = (h); __nn.__i.__l = (l); \ __asm__ ("shre %2,%1,%0" : "=d" (r) : "dI" (__nn.__ll), "dI" (c)); \ } #endif /* i960mx */ #endif /* i960 */ #if (defined (__mc68000__) || defined (__mc68020__) || defined(mc68020) \ || defined (__m68k__) || defined (__mc5200__) || defined (__mc5206e__) \ || defined (__mc5307__)) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("add%.l %5,%1\n\taddx%.l %3,%0" \ : "=d" ((USItype)(sh)), "=&d" ((USItype)(sl)) \ : "%0" ((USItype)(ah)), "d" ((USItype)(bh)), \ "%1" ((USItype)(al)), "g" ((USItype)(bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("sub%.l %5,%1\n\tsubx%.l %3,%0" \ : "=d" ((USItype)(sh)), "=&d" ((USItype)(sl)) \ : "0" ((USItype)(ah)), "d" ((USItype)(bh)), \ "1" ((USItype)(al)), "g" ((USItype)(bl))) /* The '020, '030, '040 and CPU32 have 32x32->64 and 64/32->32q-32r. */ #if defined (__mc68020__) || defined(mc68020) \ || defined (__mc68030__) || defined (mc68030) \ || defined (__mc68040__) || defined (mc68040) \ || defined (__mcpu32__) || defined (mcpu32) \ || defined (__NeXT__) #define umul_ppmm(w1, w0, u, v) \ __asm__ ("mulu%.l %3,%1:%0" \ : "=d" ((USItype)(w0)), "=d" ((USItype)(w1)) \ : "%0" ((USItype)(u)), "dmi" ((USItype)(v))) #define UMUL_TIME 45 #define udiv_qrnnd(q, r, n1, n0, d) \ __asm__ ("divu%.l %4,%1:%0" \ : "=d" ((USItype)(q)), "=d" ((USItype)(r)) \ : "0" ((USItype)(n0)), "1" ((USItype)(n1)), "dmi" ((USItype)(d))) #define UDIV_TIME 90 #define sdiv_qrnnd(q, r, n1, n0, d) \ __asm__ ("divs%.l %4,%1:%0" \ : "=d" ((USItype)(q)), "=d" ((USItype)(r)) \ : "0" ((USItype)(n0)), "1" ((USItype)(n1)), "dmi" ((USItype)(d))) #else /* for other 68k family members use 16x16->32 multiplication */ #define umul_ppmm(xh, xl, a, b) \ do { USItype __umul_tmp1, __umul_tmp2; \ __asm__ ("| Inlined umul_ppmm\n" \ " move%.l %5,%3\n" \ " move%.l %2,%0\n" \ " move%.w %3,%1\n" \ " swap %3\n" \ " swap %0\n" \ " mulu%.w %2,%1\n" \ " mulu%.w %3,%0\n" \ " mulu%.w %2,%3\n" \ " swap %2\n" \ " mulu%.w %5,%2\n" \ " add%.l %3,%2\n" \ " jcc 1f\n" \ " add%.l %#0x10000,%0\n" \ "1: move%.l %2,%3\n" \ " clr%.w %2\n" \ " swap %2\n" \ " swap %3\n" \ " clr%.w %3\n" \ " add%.l %3,%1\n" \ " addx%.l %2,%0\n" \ " | End inlined umul_ppmm" \ : "=&d" ((USItype)(xh)), "=&d" ((USItype)(xl)), \ "=d" (__umul_tmp1), "=&d" (__umul_tmp2) \ : "%2" ((USItype)(a)), "d" ((USItype)(b))); \ } while (0) #define UMUL_TIME 100 #define UDIV_TIME 400 #endif /* not mc68020 */ /* The '020, '030, '040 and '060 have bitfield insns. */ #if defined (__mc68020__) || defined (mc68020) \ || defined (__mc68030__) || defined (mc68030) \ || defined (__mc68040__) || defined (mc68040) \ || defined (__mc68060__) || defined (mc68060) \ || defined (__NeXT__) #define count_leading_zeros(count, x) \ __asm__ ("bfffo %1{%b2:%b2},%0" \ : "=d" ((USItype) (count)) \ : "od" ((USItype) (x)), "n" (0)) #define COUNT_LEADING_ZEROS_0 32 #endif #endif /* mc68000 */ #if defined (__m88000__) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("addu.co %1,%r4,%r5\n\taddu.ci %0,%r2,%r3" \ : "=r" (sh), "=&r" (sl) \ : "%rJ" (ah), "rJ" (bh), "%rJ" (al), "rJ" (bl)) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("subu.co %1,%r4,%r5\n\tsubu.ci %0,%r2,%r3" \ : "=r" (sh), "=&r" (sl) \ : "rJ" (ah), "rJ" (bh), "rJ" (al), "rJ" (bl)) #define count_leading_zeros(count, x) \ do { \ USItype __cbtmp; \ __asm__ ("ff1 %0,%1" : "=r" (__cbtmp) : "r" (x)); \ (count) = __cbtmp ^ 31; \ } while (0) #define COUNT_LEADING_ZEROS_0 63 /* sic */ #if defined (__m88110__) #define umul_ppmm(wh, wl, u, v) \ do { \ union {UDItype __ll; \ struct {USItype __h, __l;} __i; \ } __x; \ __asm__ ("mulu.d %0,%1,%2" : "=r" (__x.__ll) : "r" (u), "r" (v)); \ (wh) = __x.__i.__h; \ (wl) = __x.__i.__l; \ } while (0) #define udiv_qrnnd(q, r, n1, n0, d) \ ({union {UDItype __ll; \ struct {USItype __h, __l;} __i; \ } __x, __q; \ __x.__i.__h = (n1); __x.__i.__l = (n0); \ __asm__ ("divu.d %0,%1,%2" \ : "=r" (__q.__ll) : "r" (__x.__ll), "r" (d)); \ (r) = (n0) - __q.__l * (d); (q) = __q.__l; }) #define UMUL_TIME 5 #define UDIV_TIME 25 #else #define UMUL_TIME 17 #define UDIV_TIME 150 #endif /* __m88110__ */ #endif /* __m88000__ */ #if defined (__mips) && W_TYPE_SIZE == 32 #if __GNUC__ > 2 || __GNUC_MINOR__ >= 7 #define umul_ppmm(w1, w0, u, v) \ __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v)) #else #define umul_ppmm(w1, w0, u, v) \ __asm__ ("multu %2,%3\n\tmflo %0\n\tmfhi %1" \ : "=d" (w0), "=d" (w1) : "d" (u), "d" (v)) #endif #define UMUL_TIME 10 #define UDIV_TIME 100 #endif /* __mips */ #if (defined (__mips) && __mips >= 3) && W_TYPE_SIZE == 64 #if __GNUC__ > 2 || __GNUC_MINOR__ >= 7 #define umul_ppmm(w1, w0, u, v) \ __asm__ ("dmultu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v)) #else #define umul_ppmm(w1, w0, u, v) \ __asm__ ("dmultu %2,%3\n\tmflo %0\n\tmfhi %1" \ : "=d" (w0), "=d" (w1) : "d" (u), "d" (v)) #endif #define UMUL_TIME 20 #define UDIV_TIME 140 #endif /* __mips */ #if defined (__ns32000__) && W_TYPE_SIZE == 32 #define umul_ppmm(w1, w0, u, v) \ ({union {UDItype __ll; \ struct {USItype __l, __h;} __i; \ } __x; \ __asm__ ("meid %2,%0" \ : "=g" (__x.__ll) \ : "%0" ((USItype)(u)), "g" ((USItype)(v))); \ (w1) = __x.__i.__h; (w0) = __x.__i.__l;}) #define __umulsidi3(u, v) \ ({UDItype __w; \ __asm__ ("meid %2,%0" \ : "=g" (__w) \ : "%0" ((USItype)(u)), "g" ((USItype)(v))); \ __w; }) #define udiv_qrnnd(q, r, n1, n0, d) \ ({union {UDItype __ll; \ struct {USItype __l, __h;} __i; \ } __x; \ __x.__i.__h = (n1); __x.__i.__l = (n0); \ __asm__ ("deid %2,%0" \ : "=g" (__x.__ll) \ : "0" (__x.__ll), "g" ((USItype)(d))); \ (r) = __x.__i.__l; (q) = __x.__i.__h; }) #define count_trailing_zeros(count,x) \ do { \ __asm__ ("ffsd %2,%0" \ : "=r" ((USItype) (count)) \ : "0" ((USItype) 0), "r" ((USItype) (x))); \ } while (0) #endif /* __ns32000__ */ /* FIXME: We should test _IBMR2 here when we add assembly support for the system vendor compilers. */ #if (defined (_ARCH_PPC) /* AIX */ \ || defined (_ARCH_PWR) /* AIX */ \ || defined (__powerpc__) /* gcc */ \ || defined (__POWERPC__) /* BEOS */ \ || defined (__ppc__) /* Darwin */ \ || defined (PPC) /* GNU/Linux, SysV */ \ || defined (__vxworks__) /* VxWorks */ \ ) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ do { \ if (__builtin_constant_p (bh) && (bh) == 0) \ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \ : "=r" (sh), "=&r" (sl) : "%r" (ah), "%r" (al), "rI" (bl));\ else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0) \ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \ : "=r" (sh), "=&r" (sl) : "%r" (ah), "%r" (al), "rI" (bl));\ else \ __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \ : "=r" (sh), "=&r" (sl) \ : "%r" (ah), "r" (bh), "%r" (al), "rI" (bl)); \ } while (0) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ do { \ if (__builtin_constant_p (ah) && (ah) == 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\ else if (__builtin_constant_p (ah) && (ah) == ~(USItype) 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\ else if (__builtin_constant_p (bh) && (bh) == 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\ else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\ else \ __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \ : "=r" (sh), "=&r" (sl) \ : "r" (ah), "r" (bh), "rI" (al), "r" (bl)); \ } while (0) #define count_leading_zeros(count, x) \ __asm__ ("{cntlz|cntlzw} %0,%1" : "=r" (count) : "r" (x)) #define COUNT_LEADING_ZEROS_0 32 #if defined (_ARCH_PPC) || defined (__powerpc__) || defined (__POWERPC__) \ || defined (__ppc__) || defined (PPC) || defined (__vxworks__) #define umul_ppmm(ph, pl, m0, m1) \ do { \ USItype __m0 = (m0), __m1 = (m1); \ __asm__ ("mulhwu %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \ (pl) = __m0 * __m1; \ } while (0) #define UMUL_TIME 15 #define smul_ppmm(ph, pl, m0, m1) \ do { \ SItype __m0 = (m0), __m1 = (m1); \ __asm__ ("mulhw %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \ (pl) = __m0 * __m1; \ } while (0) #define SMUL_TIME 14 #define UDIV_TIME 120 #else #define UMUL_TIME 8 #define smul_ppmm(xh, xl, m0, m1) \ __asm__ ("mul %0,%2,%3" : "=r" (xh), "=q" (xl) : "r" (m0), "r" (m1)) #define SMUL_TIME 4 #define sdiv_qrnnd(q, r, nh, nl, d) \ __asm__ ("div %0,%2,%4" : "=r" (q), "=q" (r) : "r" (nh), "1" (nl), "r" (d)) #define UDIV_TIME 100 #endif #endif /* 32-bit POWER architecture variants. */ /* We should test _IBMR2 here when we add assembly support for the system vendor compilers. */ #if (defined (_ARCH_PPC) || defined (__powerpc__)) && W_TYPE_SIZE == 64 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ do { \ if (__builtin_constant_p (bh) && (bh) == 0) \ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \ : "=r" (sh), "=&r" (sl) : "%r" (ah), "%r" (al), "rI" (bl));\ else if (__builtin_constant_p (bh) && (bh) == ~(UDItype) 0) \ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \ : "=r" (sh), "=&r" (sl) : "%r" (ah), "%r" (al), "rI" (bl));\ else \ __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \ : "=r" (sh), "=&r" (sl) \ : "%r" (ah), "r" (bh), "%r" (al), "rI" (bl)); \ } while (0) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ do { \ if (__builtin_constant_p (ah) && (ah) == 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\ else if (__builtin_constant_p (ah) && (ah) == ~(UDItype) 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\ else if (__builtin_constant_p (bh) && (bh) == 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\ else if (__builtin_constant_p (bh) && (bh) == ~(UDItype) 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\ else \ __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \ : "=r" (sh), "=&r" (sl) \ : "r" (ah), "r" (bh), "rI" (al), "r" (bl)); \ } while (0) #define count_leading_zeros(count, x) \ __asm__ ("cntlzd %0,%1" : "=r" (count) : "r" (x)) #define COUNT_LEADING_ZEROS_0 64 #define umul_ppmm(ph, pl, m0, m1) \ do { \ UDItype __m0 = (m0), __m1 = (m1); \ __asm__ ("mulhdu %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \ (pl) = __m0 * __m1; \ } while (0) #define UMUL_TIME 15 #define smul_ppmm(ph, pl, m0, m1) \ do { \ DItype __m0 = (m0), __m1 = (m1); \ __asm__ ("mulhd %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \ (pl) = __m0 * __m1; \ } while (0) #define SMUL_TIME 14 /* ??? */ #define UDIV_TIME 120 /* ??? */ #endif /* 64-bit PowerPC. */ #if defined (__pyr__) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("addw %5,%1\n\taddwc %3,%0" \ : "=r" ((USItype)(sh)), "=&r" ((USItype)(sl)) \ : "%0" ((USItype)(ah)), "g" ((USItype)(bh)), \ "%1" ((USItype)(al)), "g" ((USItype)(bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("subw %5,%1\n\tsubwb %3,%0" \ : "=r" ((USItype)(sh)), "=&r" ((USItype)(sl)) \ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \ "1" ((USItype)(al)), "g" ((USItype)(bl))) /* This insn works on Pyramids with AP, XP, or MI CPUs, but not with SP. */ #define umul_ppmm(w1, w0, u, v) \ ({union {UDItype __ll; \ struct {USItype __h, __l;} __i; \ } __x; \ __asm__ ("movw %1,%R0\n\tuemul %2,%0" \ : "=&r" (__x.__ll) \ : "g" ((USItype) (u)), "g" ((USItype)(v))); \ (w1) = __x.__i.__h; (w0) = __x.__i.__l;}) #endif /* __pyr__ */ #if defined (__ibm032__) /* RT/ROMP */ && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("a %1,%5\n\tae %0,%3" \ : "=r" ((USItype)(sh)), "=&r" ((USItype)(sl)) \ : "%0" ((USItype)(ah)), "r" ((USItype)(bh)), \ "%1" ((USItype)(al)), "r" ((USItype)(bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("s %1,%5\n\tse %0,%3" \ : "=r" ((USItype)(sh)), "=&r" ((USItype)(sl)) \ : "0" ((USItype)(ah)), "r" ((USItype)(bh)), \ "1" ((USItype)(al)), "r" ((USItype)(bl))) #define smul_ppmm(ph, pl, m0, m1) \ __asm__ ( \ "s r2,r2\n" \ " mts r10,%2\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " m r2,%3\n" \ " cas %0,r2,r0\n" \ " mfs r10,%1" \ : "=r" ((USItype)(ph)), "=r" ((USItype)(pl)) \ : "%r" ((USItype)(m0)), "r" ((USItype)(m1)) \ : "r2") #define UMUL_TIME 20 #define UDIV_TIME 200 #define count_leading_zeros(count, x) \ do { \ if ((x) >= 0x10000) \ __asm__ ("clz %0,%1" \ : "=r" ((USItype)(count)) : "r" ((USItype)(x) >> 16)); \ else \ { \ __asm__ ("clz %0,%1" \ : "=r" ((USItype)(count)) : "r" ((USItype)(x))); \ (count) += 16; \ } \ } while (0) #endif /* RT/ROMP */ #if defined (__sh2__) && W_TYPE_SIZE == 32 #define umul_ppmm(w1, w0, u, v) \ __asm__ ("dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \ : "=r" (w1), "=r" (w0) : "r" (u), "r" (v) : "macl", "mach") #define UMUL_TIME 5 #endif #if defined (__sparc__) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("addcc %r4,%5,%1\n\taddx %r2,%3,%0" \ : "=r" (sh), "=&r" (sl) \ : "%rJ" (ah), "rI" (bh),"%rJ" (al), "rI" (bl) \ __CLOBBER_CC) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("subcc %r4,%5,%1\n\tsubx %r2,%3,%0" \ : "=r" (sh), "=&r" (sl) \ : "rJ" (ah), "rI" (bh), "rJ" (al), "rI" (bl) \ __CLOBBER_CC) /* FIXME: When gcc -mcpu=v9 is used on solaris, gcc/config/sol2-sld-64.h doesn't define anything to indicate that to us, it only sets __sparcv8. */ #if defined (__sparc_v9__) || defined (__sparcv9) /* Perhaps we should use floating-point operations here? */ #if 0 /* Triggers a bug making mpz/tests/t-gcd.c fail. Perhaps we simply need explicitly zero-extend the inputs? */ #define umul_ppmm(w1, w0, u, v) \ __asm__ ("mulx %2,%3,%%g1; srl %%g1,0,%1; srlx %%g1,32,%0" : \ "=r" (w1), "=r" (w0) : "r" (u), "r" (v) : "g1") #else /* Use v8 umul until above bug is fixed. */ #define umul_ppmm(w1, w0, u, v) \ __asm__ ("umul %2,%3,%1;rd %%y,%0" : "=r" (w1), "=r" (w0) : "r" (u), "r" (v)) #endif /* Use a plain v8 divide for v9. */ #define udiv_qrnnd(q, r, n1, n0, d) \ do { \ USItype __q; \ __asm__ ("mov %1,%%y;nop;nop;nop;udiv %2,%3,%0" \ : "=r" (__q) : "r" (n1), "r" (n0), "r" (d)); \ (r) = (n0) - __q * (d); \ (q) = __q; \ } while (0) #else #if defined (__sparc_v8__) /* gcc normal */ \ || defined (__sparcv8) /* gcc solaris */ /* Don't match immediate range because, 1) it is not often useful, 2) the 'I' flag thinks of the range as a 13 bit signed interval, while we want to match a 13 bit interval, sign extended to 32 bits, but INTERPRETED AS UNSIGNED. */ #define umul_ppmm(w1, w0, u, v) \ __asm__ ("umul %2,%3,%1;rd %%y,%0" : "=r" (w1), "=r" (w0) : "r" (u), "r" (v)) #define UMUL_TIME 5 #if HAVE_HOST_CPU_supersparc #define UDIV_TIME 60 /* SuperSPARC timing */ #else /* Don't use this on SuperSPARC because its udiv only handles 53 bit dividends and will trap to the kernel for the rest. */ #define udiv_qrnnd(q, r, n1, n0, d) \ do { \ USItype __q; \ __asm__ ("mov %1,%%y;nop;nop;nop;udiv %2,%3,%0" \ : "=r" (__q) : "r" (n1), "r" (n0), "r" (d)); \ (r) = (n0) - __q * (d); \ (q) = __q; \ } while (0) #define UDIV_TIME 25 #endif /* HAVE_HOST_CPU_supersparc */ #else /* ! __sparc_v8__ */ #if defined (__sparclite__) /* This has hardware multiply but not divide. It also has two additional instructions scan (ffs from high bit) and divscc. */ #define umul_ppmm(w1, w0, u, v) \ __asm__ ("umul %2,%3,%1;rd %%y,%0" : "=r" (w1), "=r" (w0) : "r" (u), "r" (v)) #define UMUL_TIME 5 #define udiv_qrnnd(q, r, n1, n0, d) \ __asm__ ("! Inlined udiv_qrnnd\n" \ " wr %%g0,%2,%%y ! Not a delayed write for sparclite\n" \ " tst %%g0\n" \ " divscc %3,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%%g1\n" \ " divscc %%g1,%4,%0\n" \ " rd %%y,%1\n" \ " bl,a 1f\n" \ " add %1,%4,%1\n" \ "1: ! End of inline udiv_qrnnd" \ : "=r" (q), "=r" (r) : "r" (n1), "r" (n0), "rI" (d) \ : "%g1" __AND_CLOBBER_CC) #define UDIV_TIME 37 #define count_leading_zeros(count, x) \ __asm__ ("scan %1,1,%0" : "=r" (x) : "r" (count)) /* Early sparclites return 63 for an argument of 0, but they warn that future implementations might change this. Therefore, leave COUNT_LEADING_ZEROS_0 undefined. */ #endif /* __sparclite__ */ #endif /* __sparc_v8__ */ #endif /* __sparc_v9__ */ /* Default to sparc v7 versions of umul_ppmm and udiv_qrnnd. */ #ifndef umul_ppmm #define umul_ppmm(w1, w0, u, v) \ __asm__ ("! Inlined umul_ppmm\n" \ " wr %%g0,%2,%%y ! SPARC has 0-3 delay insn after a wr\n" \ " sra %3,31,%%g2 ! Don't move this insn\n" \ " and %2,%%g2,%%g2 ! Don't move this insn\n" \ " andcc %%g0,0,%%g1 ! Don't move this insn\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,%3,%%g1\n" \ " mulscc %%g1,0,%%g1\n" \ " add %%g1,%%g2,%0\n" \ " rd %%y,%1" \ : "=r" (w1), "=r" (w0) : "%rI" (u), "r" (v) \ : "%g1", "%g2" __AND_CLOBBER_CC) #define UMUL_TIME 39 /* 39 instructions */ #endif #ifndef udiv_qrnnd #ifndef LONGLONG_STANDALONE #define udiv_qrnnd(q, r, n1, n0, d) \ do { UWtype __r; \ (q) = __MPN(udiv_qrnnd) (&__r, (n1), (n0), (d)); \ (r) = __r; \ } while (0) extern UWtype __MPN(udiv_qrnnd) _PROTO ((UWtype *, UWtype, UWtype, UWtype)); #ifndef UDIV_TIME #define UDIV_TIME 140 #endif #endif /* LONGLONG_STANDALONE */ #endif /* udiv_qrnnd */ #endif /* __sparc__ */ #if defined (__sparc__) && W_TYPE_SIZE == 64 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ( \ "addcc %4,%5,%1\n" \ " addccc %6,%7,%%g0\n" \ " addc %2,%3,%0" \ : "=r" (sh), "=&r" (sl) \ : "%rJ" (ah), "rI" (bh), "%rJ" (al), "rI" (bl), \ "rJ" ((al) >> 32), "rJ" ((bl) >> 32) \ __CLOBBER_CC) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ( \ "subcc %4,%5,%1\n" \ " subccc %6,%7,%%g0\n" \ " subc %2,%3,%0" \ : "=r" (sh), "=&r" (sl) \ : "%rJ" (ah), "rI" (bh), "%rJ" (al), "rI" (bl), \ "rJ" ((al) >> 32), "rJ" ((bl) >> 32) \ __CLOBBER_CC) #endif #if defined (__vax__) && W_TYPE_SIZE == 32 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("addl2 %5,%1\n\tadwc %3,%0" \ : "=g" ((USItype)(sh)), "=&g" ((USItype)(sl)) \ : "%0" ((USItype)(ah)), "g" ((USItype)(bh)), \ "%1" ((USItype)(al)), "g" ((USItype)(bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("subl2 %5,%1\n\tsbwc %3,%0" \ : "=g" ((USItype)(sh)), "=&g" ((USItype)(sl)) \ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \ "1" ((USItype)(al)), "g" ((USItype)(bl))) #define smul_ppmm(xh, xl, m0, m1) \ do { \ union {UDItype __ll; \ struct {USItype __l, __h;} __i; \ } __x; \ USItype __m0 = (m0), __m1 = (m1); \ __asm__ ("emul %1,%2,$0,%0" \ : "=g" (__x.__ll) : "g" (__m0), "g" (__m1)); \ (xh) = __x.__i.__h; (xl) = __x.__i.__l; \ } while (0) #define sdiv_qrnnd(q, r, n1, n0, d) \ do { \ union {DItype __ll; \ struct {SItype __l, __h;} __i; \ } __x; \ __x.__i.__h = n1; __x.__i.__l = n0; \ __asm__ ("ediv %3,%2,%0,%1" \ : "=g" (q), "=g" (r) : "g" (__x.__ll), "g" (d)); \ } while (0) #endif /* __vax__ */ #if defined (__z8000__) && W_TYPE_SIZE == 16 #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ __asm__ ("add %H1,%H5\n\tadc %H0,%H3" \ : "=r" ((unsigned int)(sh)), "=&r" ((unsigned int)(sl)) \ : "%0" ((unsigned int)(ah)), "r" ((unsigned int)(bh)), \ "%1" ((unsigned int)(al)), "rQR" ((unsigned int)(bl))) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ __asm__ ("sub %H1,%H5\n\tsbc %H0,%H3" \ : "=r" ((unsigned int)(sh)), "=&r" ((unsigned int)(sl)) \ : "0" ((unsigned int)(ah)), "r" ((unsigned int)(bh)), \ "1" ((unsigned int)(al)), "rQR" ((unsigned int)(bl))) #define umul_ppmm(xh, xl, m0, m1) \ do { \ union {long int __ll; \ struct {unsigned int __h, __l;} __i; \ } __x; \ unsigned int __m0 = (m0), __m1 = (m1); \ __asm__ ("mult %S0,%H3" \ : "=r" (__x.__i.__h), "=r" (__x.__i.__l) \ : "%1" (m0), "rQR" (m1)); \ (xh) = __x.__i.__h; (xl) = __x.__i.__l; \ (xh) += ((((signed int) __m0 >> 15) & __m1) \ + (((signed int) __m1 >> 15) & __m0)); \ } while (0) #endif /* __z8000__ */ #endif /* __GNUC__ */ #endif /* NO_ASM */ #if !defined (umul_ppmm) && defined (__umulsidi3) #define umul_ppmm(ph, pl, m0, m1) \ { \ UDWtype __ll = __umulsidi3 (m0, m1); \ ph = (UWtype) (__ll >> W_TYPE_SIZE); \ pl = (UWtype) __ll; \ } #endif #if !defined (__umulsidi3) #define __umulsidi3(u, v) \ ({UWtype __hi, __lo; \ umul_ppmm (__hi, __lo, u, v); \ ((UDWtype) __hi << W_TYPE_SIZE) | __lo; }) #endif /* Note the prototypes are under !define(umul_ppmm) etc too, since the HPPA versions above are different and we don't want to conflict. */ #if ! defined (umul_ppmm) && HAVE_NATIVE_mpn_umul_ppmm #define mpn_umul_ppmm __MPN(umul_ppmm) extern mp_limb_t mpn_umul_ppmm _PROTO ((mp_limb_t *, mp_limb_t, mp_limb_t)); #define umul_ppmm(wh, wl, u, v) \ do { \ mp_limb_t __umul_ppmm__p0; \ (wh) = __MPN(umul_ppmm) (&__umul_ppmm__p0, \ (mp_limb_t) (u), (mp_limb_t) (v)); \ (wl) = __umul_ppmm__p0; \ } while (0) #endif #if ! defined (udiv_qrnnd) && HAVE_NATIVE_mpn_udiv_qrnnd #define mpn_udiv_qrnnd __MPN(udiv_qrnnd) extern mp_limb_t mpn_udiv_qrnnd _PROTO ((mp_limb_t *, mp_limb_t, mp_limb_t, mp_limb_t)); #define udiv_qrnnd(q, r, n1, n0, d) \ do { \ mp_limb_t __udiv_qrnnd__r; \ (q) = mpn_udiv_qrnnd (&__udiv_qrnnd__r, \ (mp_limb_t) (n1), (mp_limb_t) (n0), (mp_limb_t) d); \ (r) = __udiv_qrnnd__r; \ } while (0) #endif /* If this machine has no inline assembler, use C macros. */ #if !defined (add_ssaaaa) #define add_ssaaaa(sh, sl, ah, al, bh, bl) \ do { \ UWtype __x; \ __x = (al) + (bl); \ (sh) = (ah) + (bh) + (__x < (al)); \ (sl) = __x; \ } while (0) #endif #if !defined (sub_ddmmss) #define sub_ddmmss(sh, sl, ah, al, bh, bl) \ do { \ UWtype __x; \ __x = (al) - (bl); \ (sh) = (ah) - (bh) - (__x > (al)); \ (sl) = __x; \ } while (0) #endif /* If we lack umul_ppmm but have smul_ppmm, define umul_ppmm in terms of smul_ppmm. */ #if !defined (umul_ppmm) && defined (smul_ppmm) #define umul_ppmm(w1, w0, u, v) \ do { \ UWtype __w1; \ UWtype __xm0 = (u), __xm1 = (v); \ smul_ppmm (__w1, w0, __xm0, __xm1); \ (w1) = __w1 + (-(__xm0 >> (W_TYPE_SIZE - 1)) & __xm1) \ + (-(__xm1 >> (W_TYPE_SIZE - 1)) & __xm0); \ } while (0) #endif /* If we still don't have umul_ppmm, define it using plain C. */ #if !defined (umul_ppmm) #define umul_ppmm(w1, w0, u, v) \ do { \ UWtype __x0, __x1, __x2, __x3; \ UHWtype __ul, __vl, __uh, __vh; \ UWtype __u = (u), __v = (v); \ \ __ul = __ll_lowpart (__u); \ __uh = __ll_highpart (__u); \ __vl = __ll_lowpart (__v); \ __vh = __ll_highpart (__v); \ \ __x0 = (UWtype) __ul * __vl; \ __x1 = (UWtype) __ul * __vh; \ __x2 = (UWtype) __uh * __vl; \ __x3 = (UWtype) __uh * __vh; \ \ __x1 += __ll_highpart (__x0);/* this can't give carry */ \ __x1 += __x2; /* but this indeed can */ \ if (__x1 < __x2) /* did we get it? */ \ __x3 += __ll_B; /* yes, add it in the proper pos. */ \ \ (w1) = __x3 + __ll_highpart (__x1); \ (w0) = (__x1 << W_TYPE_SIZE/2) + __ll_lowpart (__x0); \ } while (0) #endif /* If we don't have smul_ppmm, define it using umul_ppmm (which surely will exist in one form or another. */ #if !defined (smul_ppmm) #define smul_ppmm(w1, w0, u, v) \ do { \ UWtype __w1; \ UWtype __xm0 = (u), __xm1 = (v); \ umul_ppmm (__w1, w0, __xm0, __xm1); \ (w1) = __w1 - (-(__xm0 >> (W_TYPE_SIZE - 1)) & __xm1) \ - (-(__xm1 >> (W_TYPE_SIZE - 1)) & __xm0); \ } while (0) #endif /* Define this unconditionally, so it can be used for debugging. */ #define __udiv_qrnnd_c(q, r, n1, n0, d) \ do { \ UWtype __d1, __d0, __q1, __q0, __r1, __r0, __m; \ \ ASSERT ((d) != 0); \ ASSERT ((n1) < (d)); \ \ __d1 = __ll_highpart (d); \ __d0 = __ll_lowpart (d); \ \ __q1 = (n1) / __d1; \ __r1 = (n1) - __q1 * __d1; \ __m = (UWtype) __q1 * __d0; \ __r1 = __r1 * __ll_B | __ll_highpart (n0); \ if (__r1 < __m) \ { \ __q1--, __r1 += (d); \ if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ if (__r1 < __m) \ __q1--, __r1 += (d); \ } \ __r1 -= __m; \ \ __q0 = __r1 / __d1; \ __r0 = __r1 - __q0 * __d1; \ __m = (UWtype) __q0 * __d0; \ __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ if (__r0 < __m) \ { \ __q0--, __r0 += (d); \ if (__r0 >= (d)) \ if (__r0 < __m) \ __q0--, __r0 += (d); \ } \ __r0 -= __m; \ \ (q) = (UWtype) __q1 * __ll_B | __q0; \ (r) = __r0; \ } while (0) /* If the processor has no udiv_qrnnd but sdiv_qrnnd, go through __udiv_w_sdiv (defined in libgcc or elsewhere). */ #if !defined (udiv_qrnnd) && defined (sdiv_qrnnd) #define udiv_qrnnd(q, r, nh, nl, d) \ do { \ UWtype __r; \ (q) = __MPN(udiv_w_sdiv) (&__r, nh, nl, d); \ (r) = __r; \ } while (0) #endif /* If udiv_qrnnd was not defined for this processor, use __udiv_qrnnd_c. */ #if !defined (udiv_qrnnd) #define UDIV_NEEDS_NORMALIZATION 1 #define udiv_qrnnd __udiv_qrnnd_c #endif #if !defined (count_leading_zeros) #define count_leading_zeros(count, x) \ do { \ UWtype __xr = (x); \ UWtype __a; \ \ if (W_TYPE_SIZE == 32) \ { \ __a = __xr < ((UWtype) 1 << 2*__BITS4) \ ? (__xr < ((UWtype) 1 << __BITS4) ? 1 : __BITS4 + 1) \ : (__xr < ((UWtype) 1 << 3*__BITS4) ? 2*__BITS4 + 1 \ : 3*__BITS4 + 1); \ } \ else \ { \ for (__a = W_TYPE_SIZE - 8; __a > 0; __a -= 8) \ if (((__xr >> __a) & 0xff) != 0) \ break; \ ++__a; \ } \ \ (count) = W_TYPE_SIZE + 1 - __a - __clz_tab[__xr >> __a]; \ } while (0) /* This version gives a well-defined value for zero. */ #define COUNT_LEADING_ZEROS_0 (W_TYPE_SIZE - 1) #define COUNT_LEADING_ZEROS_NEED_CLZ_TAB #endif #ifdef COUNT_LEADING_ZEROS_NEED_CLZ_TAB extern const unsigned char __GMP_DECLSPEC __clz_tab[128]; #endif #if !defined (count_trailing_zeros) /* Define count_trailing_zeros using count_leading_zeros. The latter might be defined in asm, but if it is not, the C version above is good enough. */ #define count_trailing_zeros(count, x) \ do { \ UWtype __ctz_x = (x); \ UWtype __ctz_c; \ ASSERT (__ctz_x != 0); \ count_leading_zeros (__ctz_c, __ctz_x & -__ctz_x); \ (count) = W_TYPE_SIZE - 1 - __ctz_c; \ } while (0) #endif #ifndef UDIV_NEEDS_NORMALIZATION #define UDIV_NEEDS_NORMALIZATION 0 #endif /* Whether udiv_qrnnd is actually implemented with udiv_qrnnd_preinv, and that hence the latter should always be used. */ #ifndef UDIV_PREINV_ALWAYS #define UDIV_PREINV_ALWAYS 0 #endif /* Give defaults for UMUL_TIME and UDIV_TIME. */ #ifndef UMUL_TIME #define UMUL_TIME 1 #endif #ifndef UDIV_TIME #define UDIV_TIME UMUL_TIME #endif /* count_trailing_zeros is often on the slow side, so make that the default */ #ifndef COUNT_TRAILING_ZEROS_TIME #define COUNT_TRAILING_ZEROS_TIME 15 /* cycles */ #endif