If building on a subset of architectures only, it is easy to miss
wrapper headers which are required by other architectures because
they lack the corresponding sysdeps header.  The check ensures
that every installed header which is not itself a sysdeps header
has a header under include/ (that presumably wraps the header,
and perhaps also adding declarations and definitions for !_ISOMAC).

Also check for the absence of the sysdeps/generic/bits directory
removed in commit c72565e5f1124c2dc72573e83406fe999e56091f, to make
accidental re-introduction more difficult.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>

	* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.

I noticed that, now that build-many-glibcs.py no longer copies glibc
sources, I was getting core dumps in my glibc source directories.  The
cause appears to be, from the i686-gnu build:

for dso in ` env LD_TRACE_LOADED_OBJECTS=1  \
        /scratch/jmyers/glibc-bot/build/glibcs/i686-gnu/glibc/elf/ld.so.1 \
        /scratch/jmyers/glibc-bot/build/glibcs/i686-gnu/glibc/testroot.pristine/bin/sh \
[...]
Segmentation fault (core dumped)

In this case, the x86 architecture means the binary executes, but
dumps core rather than actually working.

Anything involving running the newly built glibc should only be done
ifeq ($(run-built-tests),yes).  This patch conditions the relevant
part of the testroot setup accordingly.

Tested for x86_64, and with build-many-glibcs.py for i686-gnu.

	* Makefile ($(objpfx)testroot.pristine/install.stamp): Do not run
	dynamic linker unless [$(run-built-tests) = yes].

* Makefile (testroot.pristine): New rules to initialize the
test-in-container "testroot".
* Makerules (all-testsuite): Add tests-container.
* Rules (tests-expected): Add tests-container.
(binaries-all-tests): Likewise.
(tests-container): New, run these tests in the testroot container.
* support/Makefile (others): Add *-container, support_paths.c,
xmkdirp, and links-dso-program.
* support/links-dso-program-c.c: New.
* support/links-dso-program.cc: New.
* support/test-container.c: New.
* support/shell-container.c: New.
* support/echo-container.c: New.
* support/true-container.c: New.
* support/xmkdirp.c: New.
* support/xsymlink.c: New.
* support/support_paths.c: New.
* support/support.h: Add support paths prototypes.
* support/xunistd.h: Add xmkdirp () and xsymlink ().

* nss/tst-nss-test3.c: Convert to test-in-container.
* nss/tst-nss-test3.root/: New.

$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables.  This needs make 4.0
(released in 2013), so update the requirement to match.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>

	* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.

glibc has an add-ons mechanism to allow additional software to be
integrated into the glibc build.  Such add-ons may be within the glibc
source tree, or outside it at a path passed to the --enable-add-ons
configure option.

localedata and crypt were once add-ons, distributed in separate
release tarballs, but long since stopped using that mechanism.
Linuxthreads was always an add-on.  Ports spent some time as an add-on
with separate release tarballs, then was first moved into the glibc
source tree, then had its sysdeps files moved into the main sysdeps
hierarchy so the add-ons mechanism was no longer used.  NPTL spent
some time as an add-on in the main glibc tree before stopping using
the add-on mechanism.  libidn used to have separate release tarballs
but no longer does so, but still uses the add-ons mechanism within the
glibc source tree.  Various other software has supported building with
the add-ons mechanism at times in the past, but I don't think any is
still widely used.

Add-ons involve significant, little-used complexity in the glibc build
system, and make it hard to understand what the space of possible
glibc configurations is.  This patch removes the add-ons mechanism.
libidn is now built via the Subdirs mechanism to cause any
configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN
(which effectively means shared libraries are available) is now
defined via sysdeps/unix/inet/configure.  Various references to
add-ons around the source tree are removed (in the case of maint.texi,
the example list of sysdeps directories is still very out of date).

Externally maintained ports should now put their files in the normal
sysdeps directory structure rather than being arranged as add-ons;
they probably need to change e.g. elf.h anyway, rather than actually
being able to work just as a drop-in subtree.  Hurd libpthread should
be arranged similarly to NPTL, so some files might go in a
hurd-pthreads (or similar) top-level directory in glibc, while sysdeps
files should go in the normal sysdeps directory structure (possibly in
hurd or hurd-pthreads subdirectories, just as there are nptl
subdirectories in the sysdeps tree).

Tested for x86_64, and with build-many-glibcs.py.

	* configure.ac (--enable-add-ons): Remove option.
	(machine): Do not mention add-ons in comment.
	(LIBC_PRECONFIGURE): Likewise.
	(add_ons): Remove variable and sanity checks and logic to locate
	add-ons.
	(add_ons_automatic): Remove variable.
	(configured_add_ons): Likewise.
	(add_ons_sfx): Likewise.
	(add_ons_pfx): Likewise.
	(add_on_subdirs): Likewise.
	(sysnames_add_ons): Likewise.  Remove loop over add-ons and
	consideration of add-ons in Implies handling.
	(sysdeps_add_ons): Likewise.
	* configure: Regenerated.
	* libidn/configure.ac: Remove.
	* libidn/configure: Likewise.
	* sysdeps/unix/inet/configure.ac: New file.
	* sysdeps/unix/inet/configure: New generated file.
	* sysdeps/unix/inet/Subdirs: Add libidn.
	* Makeconfig (sysdeps-srcdirs): Remove variable.
	(+sysdep_dirs): Do not include $(sysdeps-srcdirs).
	($(common-objpfx)config.status): Do not depend on add-on files.
	($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in
	comment.
	(all-subdirs): Do not include $(add-on-subdirs).
	* Makefile (dist-prepare): Do not use $(sysdeps-add-ons).
	* config.make.in (add-ons): Remove variable.
	(add-on-subdirs): Likewise.
	(sysdeps-add-ons): Likewise.
	* manual/Makefile (add-chapters): Remove.
	($(objpfx)texis): Do not depend on $(add-chapters).
	(nonexamples): Do not handle $(add-chapters).
	(examples): Do not handle $(add-ons).
	(chapters.% top-menu.%): Do not pass '$(add-chapters)' to
	libc-texinfo.sh.
	* manual/install.texi (Installation): Do not mention add-ons.
	(--enable-add-ons): Do not document configure option.
	* INSTALL: Regenerated.
	* manual/libc-texinfo.sh: Do not handle $2 add-ons argument.
	* manual/maint.texi (Hierarchy Conventions): Do not mention
	add-ons.
	* scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use
	--enable-add-ons.
	* scripts/gen-sorted.awk: Do not handle Subdirs files from
	add-ons.
	* scripts/test-installation.pl: Do not handle glibc-compat add-on.
	* sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.

This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.

There are still quite a few tests that need to see internal gunk of
one variety or another.  For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'.  There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.

There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all.  (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.)  When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.

The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change.  They should be
relatively self-explanatory.  In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.

	* Makerules: New subdir configuration variables 'tests-internal'
	and 'test-internal-extras'.  Test files in these categories will
	still be compiled with MODULE_NAME=nonlib.  Test files in the
	existing categories (tests, xtests, test-srcs, test-extras) are
	now compiled with MODULE_NAME=testsuite.
	New subdir configuration variable 'modules-names-tests'.  Files
	which are in both 'modules-names' and 'modules-names-tests' will
	be compiled with MODULE_NAME=testsuite instead of
	MODULE_NAME=extramodules.
	(gen-as-const-headers): Move to tests-internal.
	(do-tests-clean, common-mostlyclean): Support tests-internal.
	* Makeconfig (built-modules): Add testsuite.
	* Makefile: Change libof-check-installed-headers-c and
	libof-check-installed-headers-cxx to 'testsuite'.
	* Rules: Likewise.  Support tests-internal.
	* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
	Remove extra-modules.mk.

	* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
	* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
	PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
	very top of the file and rationalize their order.
	If MODULE_NAME is not defined at all, define IS_IN to always be
	false, and don't define _ISOMAC.
	If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
	true, define _ISOMAC and suppress everything else in this file,
	starting with the inclusion of config.h.
	Do check for inappropriate definitions of __OPTIMIZE__ and
	__FAST_MATH__ here, but only if _ISOMAC is not defined.
        Correct some out-of-date commentary.

	* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
	and _Mlong_double_ before including math.h.
	* include/string.h: If _ISOMAC is defined, don't expose
	_STRING_ARCH_unaligned. Move a comment to a more appropriate
	location.

	* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
	* include/time.h, include/unistd.h, include/wchar.h: No need to
	check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.

	* misc/sys/cdefs.h (__NTHNL): New macro.
	* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
	(__m81_defun): Use __NTHNL to avoid errors with GCC 6.

	* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
	defined, for HAVE_TUNABLES.
	* inet/tst-checks-posix.c: No need to define _ISOMAC.
	* intl/tst-gettext2.c: Provide own definition of N_.
	* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
	* math/test-signgam-main.c: No need to define _ISOMAC.
	* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
	* stdlib/tst-strtod1i.c: ...this new file.
	* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
        Split tests of __strtod_internal to...
	* stdlib/tst-strtod5i.c: ...this new file.
	* string/test-string.h: Include stdint.h. Duplicate definition of
	inhibit_loop_to_libcall here (from libc-symbols.h).
	* string/test-strstr.c: Provide dummy definition of
	libc_hidden_builtin_def when including strstr.c.
	* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
	mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
	* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
	Don't include init-arch.h.
	* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
	Don't include init-arch.h.

	* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
	tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
	unload, unload2, circleload1, neededtest, neededtest2,
	neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
	tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
	tst-stackguard1, tst-_dl_addr_inside_object, and all of the
	ifunc tests to tests-internal.
	Don't add $(modules-names) to test-extras.
	* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
	Add tst-deadline to tests-static-internal.
	* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
	tests-internal.
	* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
	* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
	tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
	tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
	tst-sem12-static, and tst-stackguard1-static to tests-internal.
        Link tests-internal with libpthread also.
	Don't add $(modules-names) to test-extras.
	* nss/Makefile: Move tst-field to tests-internal.
	* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
	tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
	* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
	tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
	tests-internal.
        * sunrpc/Makefile: Move tst-svc_register to tests-internal.
	* sysdeps/powerpc/Makefile: Move test-get_hwcap and
	test-get_hwcap-static to tests-internal.
	* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
	tests-internal.
	* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
	modules-names-tests.