From a1e90b2352f9f45293d3d439270f81607284ca9a Mon Sep 17 00:00:00 2001 From: Alex Neronskiy Date: Wed, 8 Jun 2011 15:11:50 -0700 Subject: Fix documentation of fetch-pack that implies that the client can disconnect after sending wants. Specify conditions under which the client can terminate the connection early. Previously, an unintended behavior was possible which could confuse servers. Based-on-patch-by: Junio C Hamano Signed-off-by: Alex Neronskiy Signed-off-by: Junio C Hamano --- Documentation/technical/pack-protocol.txt | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'Documentation') diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index 369f91d3b9..ce69f57b5d 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -179,18 +179,19 @@ and descriptions. Packfile Negotiation -------------------- -After reference and capabilities discovery, the client can decide -to terminate the connection by sending a flush-pkt, telling the -server it can now gracefully terminate (as happens with the ls-remote -command) or it can enter the negotiation phase, where the client and -server determine what the minimal packfile necessary for transport is. - -Once the client has the initial list of references that the server -has, as well as the list of capabilities, it will begin telling the -server what objects it wants and what objects it has, so the server -can make a packfile that only contains the objects that the client needs. -The client will also send a list of the capabilities it wants to be in -effect, out of what the server said it could do with the first 'want' line. +After reference and capabilities discovery, the client can decide to +terminate the connection by sending a flush-pkt, telling the server it can +now gracefully terminate, and disconnect, when it does not need any pack +data. This can happen with the ls-remote command, and also can happen when +the client already is up-to-date. + +Otherwise, it enters the negotiation phase, where the client and +server determine what the minimal packfile necessary for transport is, +by telling the server what objects it wants and what objects it has, +so the server can make a packfile that only contains the objects that the +client needs. The client will also send a list of the capabilities it +wants to be in effect, out of what the server said it could do with the +first 'want' line. ---- upload-request = want-list @@ -219,8 +220,8 @@ If client is requesting a shallow clone, it will now send a 'deepen' line with the depth it is requesting. Once all the "want"s (and optional 'deepen') are transferred, -clients MUST send a flush-pkt. If the client has all the references -on the server, client flushes and disconnects. +clients MUST send a flush-pkt, to tell the server side that it is +done sending the list. TODO: shallow/unshallow response and document the deepen command in the ABNF. -- cgit v1.2.1 From 4a1c26951610fa1d2b9f8d9f7c85979bed856c94 Mon Sep 17 00:00:00 2001 From: Alex Neronskiy Date: Wed, 8 Jun 2011 15:11:51 -0700 Subject: Document the underlying protocol used by shallow repositories and --depth commands. Explain the exchange that occurs between a client and server when the client is requesting shallow history and/or is already using a shallow repository. Signed-off-by: Alex Neronskiy Signed-off-by: Junio C Hamano --- Documentation/technical/pack-protocol.txt | 88 +++++++++++++++++++++++-------- 1 file changed, 66 insertions(+), 22 deletions(-) (limited to 'Documentation') diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index ce69f57b5d..a7004c63e7 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -187,27 +187,28 @@ the client already is up-to-date. Otherwise, it enters the negotiation phase, where the client and server determine what the minimal packfile necessary for transport is, -by telling the server what objects it wants and what objects it has, -so the server can make a packfile that only contains the objects that the -client needs. The client will also send a list of the capabilities it -wants to be in effect, out of what the server said it could do with the -first 'want' line. +by telling the server what objects it wants, its shallow objects +(if any), and the maximum commit depth it wants (if any). The client +will also send a list of the capabilities it wants to be in effect, +out of what the server said it could do with the first 'want' line. ---- upload-request = want-list - have-list - compute-end + *shallow-line + *1depth-request + flush-pkt want-list = first-want *additional-want - flush-pkt + + shallow-line = PKT_LINE("shallow" SP obj-id) + + depth-request = PKT_LINE("deepen" SP depth) first-want = PKT-LINE("want" SP obj-id SP capability-list LF) additional-want = PKT-LINE("want" SP obj-id LF) - have-list = *have-line - have-line = PKT-LINE("have" SP obj-id LF) - compute-end = flush-pkt / PKT-LINE("done") + depth = 1*DIGIT ---- Clients MUST send all the obj-ids it wants from the reference @@ -216,21 +217,64 @@ discovery phase as 'want' lines. Clients MUST send at least one obj-id in a 'want' command which did not appear in the response obtained through ref discovery. -If client is requesting a shallow clone, it will now send a 'deepen' -line with the depth it is requesting. +The client MUST write all obj-ids which it only has shallow copies +of (meaning that it does not have the parents of a commit) as +'shallow' lines so that the server is aware of the limitations of +the client's history. Clients MUST NOT mention an obj-id which +it does not know exists on the server. + +The client now sends the maximum commit history depth it wants for +this transaction, which is the number of commits it wants from the +tip of the history, if any, as a 'deepen' line. A depth of 0 is the +same as not making a depth request. The client does not want to receive +any commits beyond this depth, nor objects needed only to complete +those commits. Commits whose parents are not received as a result are +defined as shallow and marked as such in the server. This information +is sent back to the client in the next step. + +Once all the 'want's and 'shallow's (and optional 'deepen') are +transferred, clients MUST send a flush-pkt, to tell the server side +that it is done sending the list. + +Otherwise, if the client sent a positive depth request, the server +will determine which commits will and will not be shallow and +send this information to the client. If the client did not request +a positive depth, this step is skipped. -Once all the "want"s (and optional 'deepen') are transferred, -clients MUST send a flush-pkt, to tell the server side that it is -done sending the list. +---- + shallow-update = *shallow-line + *unshallow-line + flush-pkt -TODO: shallow/unshallow response and document the deepen command in the ABNF. + shallow-line = PKT-LINE("shallow" SP obj-id) + + unshallow-line = PKT-LINE("unshallow" SP obj-id) +---- + +If the client has requested a positive depth, the server will compute +the set of commits which are no deeper than the desired depth, starting +at the client's wants. The server writes 'shallow' lines for each +commit whose parents will not be sent as a result. The server writes +an 'unshallow' line for each commit which the client has indicated is +shallow, but is no longer shallow at the currently requested depth +(that is, its parents will now be sent). The server MUST NOT mark +as unshallow anything which the client has not indicated was shallow. Now the client will send a list of the obj-ids it has using 'have' -lines. In multi_ack mode, the canonical implementation will send up -to 32 of these at a time, then will send a flush-pkt. The canonical -implementation will skip ahead and send the next 32 immediately, -so that there is always a block of 32 "in-flight on the wire" at a -time. +lines, so the server can make a packfile that only contains the objects +that the client needs. In multi_ack mode, the canonical implementation +will send up to 32 of these at a time, then will send a flush-pkt. The +canonical implementation will skip ahead and send the next 32 immediately, +so that there is always a block of 32 "in-flight on the wire" at a time. + +---- + upload-haves = have-list + compute-end + + have-list = *have-line + have-line = PKT-LINE("have" SP obj-id LF) + compute-end = flush-pkt / PKT-LINE("done") +---- If the server reads 'have' lines, it then will respond by ACKing any of the obj-ids the client said it had that the server also has. The -- cgit v1.2.1