If $GIT_COMMON_DIR is set, it should be $GIT_COMMON_DIR/hooks/, not
$GIT_DIR/hooks/. Just let rev-parse --git-path handle it.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

"git rebase --skip" did not work well when it stopped due to a
conflict twice in a row.

* bc/fix-rebase-merge-skip:
  rebase--merge: fix --skip with two conflicts in a row

If git rebase --merge encountered a conflict, --skip would not work if the
next commit also conflicted.  The msgnum file would never be updated with
the new patch number, so no patch would actually be skipped, resulting in an
inescapable loop.

Update the msgnum file's value as the first thing in call_merge.  This also
avoids an "Already applied" message when skipping a commit.  There is no
visible change for the other contexts in which call_merge is invoked, as the
msgnum file's value remains unchanged in those situations.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Adjust shell scripts to use $(cmd) instead of `cmd`.

* ep/shell-command-substitution: (41 commits)
  t5000-tar-tree.sh: use the $( ... ) construct for command substitution
  t4204-patch-id.sh: use the $( ... ) construct for command substitution
  t4119-apply-config.sh: use the $( ... ) construct for command substitution
  t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
  t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
  t4038-diff-combined.sh: use the $( ... ) construct for command substitution
  t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
  t4014-format-patch.sh: use the $( ... ) construct for command substitution
  t4013-diff-various.sh: use the $( ... ) construct for command substitution
  t4012-diff-binary.sh: use the $( ... ) construct for command substitution
  t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
  t4006-diff-mode.sh: use the $( ... ) construct for command substitution
  t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
  t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
  t1050-large.sh: use the $( ... ) construct for command substitution
  t1020-subdirectory.sh: use the $( ... ) construct for command substitution
  t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
  t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
  t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
  t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
  ...

The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX.  However, all but the
simplest uses become complicated quickly.  In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
   sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Work around /bin/sh that does not like "return" at the top-level
of a file that is dot-sourced from inside a function definition.

* km/avoid-non-function-return-in-rebase:
  Revert "rebase: fix run_specific_rebase's use of "return" on FreeBSD"
  rebase: avoid non-function use of "return" on FreeBSD

Since a1549e10, 15d4bf2e and 01a1e646 (first appearing in v1.8.4)
the git-rebase--*.sh scripts have used a "return" to stop execution
of the dot-sourced file and return to the "dot" command that
dot-sourced it.  The /bin/sh utility on FreeBSD however behaves
poorly under some circumstances when such a "return" is executed.

In particular, if the "dot" command is contained within a function,
then when a "return" is executed by the script it runs (that is not
itself inside a function), control will return from the function
that contains the "dot" command skipping any statements that might
follow the dot command inside that function.  Commit 99855ddf (first
appearing in v1.8.4.1) addresses this by making the "dot" command
the last line in the function.

Unfortunately the FreeBSD /bin/sh may also execute some statements
in the script run by the "dot" command that appear after the
troublesome "return".  The fix in 99855ddf does not address this
problem.

For example, if you have script1.sh with these contents:

run_script2() {
        . "$(dirname -- "$0")/script2.sh"
        _e=$?
        echo only this line should show
        [ $_e -eq 5 ] || echo expected status 5 got $_e
        return 3
}
run_script2
e=$?
[ $e -eq 3 ] || { echo expected status 3 got $e; exit 1; }

And script2.sh with these contents:

if [ 5 -gt 3 ]; then
        return 5
fi
case bad in *)
        echo always shows
esac
echo should not get here
! :

When running script1.sh (e.g. '/bin/sh script1.sh' or './script1.sh'
after making it executable), the expected output from a POSIX shell
is simply the single line:

only this line should show

However, when run using FreeBSD's /bin/sh, the following output
appears instead:

should not get here
expected status 3 got 1

Not only did the lines following the "dot" command in the run_script2
function in script1.sh get skipped, but additional lines in script2.sh
following the "return" got executed -- but not all of them (e.g. the
"echo always shows" line did not run).

These issues can be avoided by not using a top-level "return" in
script2.sh.  If script2.sh is changed to this:

main() {
        if [ 5 -gt 3 ]; then
                return 5
        fi
        case bad in *)
                echo always shows
        esac
        echo should not get here
        ! :
}
main

Then it behaves the same when using FreeBSD's /bin/sh as when using
other more POSIX compliant /bin/sh implementations.

We fix the git-rebase--*.sh scripts in a similar fashion by moving
the top-level code that contains "return" statements into its own
function and then calling that as the last line in the script.

Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

In a shell snippet meant to be sourced by other shell scripts, an
opening #! line does more harm than good.

The harm:

 - When the shell library is sourced, the interpreter and options from
   the #! line are not used.  Specifying a particular shell can
   confuse the reader into thinking it is safe for the shell library
   to rely on idiosyncrasies of that shell.

 - Using #! instead of a plain comment drops a helpful visual clue
   that this is a shell library and not a self-contained script.

 - Tools such as lintian can use a #! line to tell when an
   installation script has failed by forgetting to set a script
   executable.  This check does not work if shell libraries also start
   with a #! line.

The good:

 - Text editors notice the #! line and use it for syntax highlighting
   if you try to edit the installed scripts (without ".sh" suffix) in
   place.

The use of the #! for file type detection is not needed because Git's
shell libraries are meant to be edited in source form (with ".sh"
suffix).  Replace the opening #! lines with comments.

This involves tweaking the test harness's valgrind support to find
shell libraries by looking for "# " in the first line instead of "#!"
(see v1.7.6-rc3~7, 2011-06-17).

Suggested by Russ Allbery through lintian.  Thanks to Jeff King and
Clemens Buchacher for further analysis.

Tested by searching for non-executable scripts with #! line:

	find . -name .git -prune -o -type f -not -executable |
	while read file
	do
		read line <"$file"
		case $line in
		'#!'*)
			echo "$file"
			;;
		esac
	done

The only remaining scripts found are templates for shell scripts
(unimplemented.sh, wrap-for-bin.sh) and sample input used in tests
(t/t4034/perl/{pre,post}).

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Return control to the caller git-rebase.sh to get these two tasks

    rm -fr "$dotest"
    git gc --auto

done by it.

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>