/* Copyright (C) 2001-2023 Artifex Software, Inc. All Rights Reserved. This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of the license contained in the file LICENSE in this distribution. Refer to licensing information at http://www.artifex.com or contact Artifex Software, Inc., 1305 Grant Avenue - Suite 200, Novato, CA 94945, U.S.A., +1(415)492-9861, for further information. */ /* Pattern color mapping for Ghostscript library */ #include "math_.h" #include "memory_.h" #include "gx.h" #include "gp.h" #include "gserrors.h" #include "gsstruct.h" #include "gsutil.h" /* for gs_next_ids */ #include "gxfixed.h" #include "gxmatrix.h" #include "gspath2.h" #include "gxcspace.h" /* for gscolor2.h */ #include "gxcolor2.h" #include "gxdcolor.h" #include "gxdevice.h" #include "gxdevmem.h" #include "gxpcolor.h" #include "gxp1impl.h" #include "gxclist.h" #include "gxcldev.h" #include "gzstate.h" #include "gxdevsop.h" #include "gdevmpla.h" #include "gdevp14.h" #include "gxgetbit.h" #include "gscoord.h" #include "gsicc_blacktext.h" #include "gscspace.h" #if RAW_PATTERN_DUMP unsigned int global_pat_index = 0; #endif /* Define the default size of the Pattern cache. */ #define max_cached_patterns_LARGE 50 #define max_pattern_bits_LARGE 100000 #define max_cached_patterns_SMALL 5 #define max_pattern_bits_SMALL 1000 uint gx_pat_cache_default_tiles(void) { #if ARCH_SMALL_MEMORY return max_cached_patterns_SMALL; #else #ifdef DEBUG return (gs_debug_c('.') ? max_cached_patterns_SMALL : max_cached_patterns_LARGE); #else return max_cached_patterns_LARGE; #endif #endif } ulong gx_pat_cache_default_bits(void) { #if ARCH_SMALL_MEMORY return max_pattern_bits_SMALL; #else #ifdef DEBUG return (gs_debug_c('.') ? max_pattern_bits_SMALL : max_pattern_bits_LARGE); #else return max_pattern_bits_LARGE; #endif #endif } /* Define the structures for Pattern rendering and caching. */ private_st_color_tile(); private_st_color_tile_element(); private_st_pattern_cache(); private_st_device_pattern_accum(); private_st_pattern_trans(); /* ------ Pattern rendering ------ */ /* Device procedures */ static dev_proc_open_device(pattern_accum_open); static dev_proc_close_device(pattern_accum_close); static dev_proc_fill_rectangle(pattern_accum_fill_rectangle); static dev_proc_copy_mono(pattern_accum_copy_mono); static dev_proc_copy_color(pattern_accum_copy_color); static dev_proc_copy_planes(pattern_accum_copy_planes); static dev_proc_get_bits_rectangle(pattern_accum_get_bits_rectangle); static dev_proc_fill_rectangle_hl_color(pattern_accum_fill_rectangle_hl_color); /* not static for use by clist_dev_spec_op with pattern-clist */ dev_proc_dev_spec_op(pattern_accum_dev_spec_op); /* The device descriptor */ static void pattern_accum_initialize_device_procs(gx_device *dev) { set_dev_proc(dev, open_device, pattern_accum_open); set_dev_proc(dev, close_device, pattern_accum_close); set_dev_proc(dev, fill_rectangle, pattern_accum_fill_rectangle); set_dev_proc(dev, copy_mono, pattern_accum_copy_mono); set_dev_proc(dev, copy_color, pattern_accum_copy_color); set_dev_proc(dev, get_clipping_box, gx_get_largest_clipping_box); set_dev_proc(dev, get_bits_rectangle, pattern_accum_get_bits_rectangle); set_dev_proc(dev, fill_rectangle_hl_color, pattern_accum_fill_rectangle_hl_color); set_dev_proc(dev, dev_spec_op, pattern_accum_dev_spec_op); set_dev_proc(dev, copy_planes, pattern_accum_copy_planes); /* It would be much nicer if gx_device_init set the following * defaults for us, but that doesn't work for some reason. */ set_dev_proc(dev, copy_alpha, gx_default_copy_alpha); set_dev_proc(dev, fill_path, gx_default_fill_path); set_dev_proc(dev, stroke_path, gx_default_stroke_path); set_dev_proc(dev, fill_mask, gx_default_fill_mask); set_dev_proc(dev, fill_trapezoid, gx_default_fill_trapezoid); set_dev_proc(dev, fill_parallelogram, gx_default_fill_parallelogram); set_dev_proc(dev, fill_triangle, gx_default_fill_triangle); set_dev_proc(dev, draw_thin_line, gx_default_draw_thin_line); set_dev_proc(dev, strip_tile_rectangle, gx_default_strip_tile_rectangle); set_dev_proc(dev, begin_typed_image, gx_default_begin_typed_image); set_dev_proc(dev, composite, gx_default_composite); set_dev_proc(dev, text_begin, gx_default_text_begin); set_dev_proc(dev, strip_copy_rop2, gx_default_strip_copy_rop2); set_dev_proc(dev, strip_tile_rect_devn, gx_default_strip_tile_rect_devn); set_dev_proc(dev, transform_pixel_region, gx_default_transform_pixel_region); set_dev_proc(dev, fill_stroke_path, gx_default_fill_stroke_path); set_dev_proc(dev, lock_pattern, gx_default_lock_pattern); set_dev_proc(dev, copy_alpha_hl_color, gx_default_copy_alpha_hl_color); } static const gx_device_pattern_accum gs_pattern_accum_device = {std_device_std_body_type_open(gx_device_pattern_accum, pattern_accum_initialize_device_procs, "pattern accumulator", &st_device_pattern_accum, 0, 0, 72, 72) }; extern dev_proc_open_device(clist_open); int pattern_clist_open_device(gx_device *dev) { /* This function is defiled only for clist_init_bands. */ return clist_open(dev); } static dev_proc_create_buf_device(dummy_create_buf_device) { gx_device_memory *mdev = (gx_device_memory *)*pbdev; gs_make_mem_device(mdev, gdev_mem_device_for_bits(target->color_info.depth), mem, 0, target); return 0; } static dev_proc_size_buf_device(dummy_size_buf_device) { return 0; } static dev_proc_setup_buf_device(dummy_setup_buf_device) { return 0; } static dev_proc_destroy_buf_device(dummy_destroy_buf_device) { } /* Attempt to determine the size of a pattern (the approximate amount that will */ /* be needed in the pattern cache). If we end up using the clist, this is only */ /* a guess -- we use the tile size which will _probably_ be too large. */ static size_t gx_pattern_size_estimate(gs_pattern1_instance_t *pinst, bool has_tags) { gx_device *tdev = pinst->saved->device; int depth = (pinst->templat.PaintType == 2 ? 1 : tdev->color_info.depth); size_t raster; size_t size; if (pinst->size.x == 0 || pinst->size.y == 0) return 0; if (pinst->templat.uses_transparency) { /* if the device has tags, add in an extra tag byte for the pdf14 compositor */ raster = ((size_t)pinst->size.x * ((depth/8) + 1 + (has_tags ? 1 : 0))); } else { raster = ((size_t)pinst->size.x * depth + 7) / 8; } size = raster > max_size_t / pinst->size.y ? (max_size_t - 0xFFFF) : raster * pinst->size.y; return size; } static void gx_pattern_accum_finalize_cw(gx_device * dev) { gx_device_clist_writer *cwdev = (gx_device_clist_writer *)dev; rc_decrement_only(cwdev->target, "gx_pattern_accum_finalize_cw"); } bool gx_device_is_pattern_accum(gx_device *dev) { return dev_proc(dev, open_device) == pattern_accum_open; } bool gx_device_is_pattern_clist(gx_device *dev) { return dev_proc(dev, open_device) == pattern_clist_open_device; } /* Allocate a pattern accumulator, with an initial refct of 0. */ gx_device_forward * gx_pattern_accum_alloc(gs_memory_t * mem, gs_memory_t * storage_memory, gs_pattern1_instance_t *pinst, client_name_t cname) { gx_device *tdev = pinst->saved->device; bool has_tags = device_encodes_tags(tdev); size_t size = gx_pattern_size_estimate(pinst, has_tags); gx_device_forward *fdev; int force_no_clist = 0; size_t max_pattern_bitmap = tdev->MaxPatternBitmap == 0 ? MaxPatternBitmap_DEFAULT : tdev->MaxPatternBitmap; pinst->is_planar = tdev->is_planar; /* * If the target device can accumulate a pattern stream and the language * client supports high level patterns (ps and pdf only) we don't need a * raster or clist representation for the pattern, but the code goes * through the motions of creating the device anyway. Later when the * pattern paint procedure is called an error is returned and whatever * has been set up here is destroyed. We try to make sure the same path * is taken in the code even though the device is never used because * there are pathological problems (see Bug689851.pdf) where the pattern * is so large we can't even allocate the memory for the device and the * dummy clist path must be used. None of this discussion is relevant if * the client language does not support high level patterns or the device * cannot accumulate the pattern stream. */ if (pinst->saved->have_pattern_streams == 0 && (*dev_proc(pinst->saved->device, dev_spec_op))((gx_device *)pinst->saved->device, gxdso_pattern_can_accum, pinst, 0) == 1) force_no_clist = 1; /* Set only for first time through */ if (force_no_clist || (size < max_pattern_bitmap && !pinst->is_clist) || pinst->templat.PaintType != 1 ) { gx_device_pattern_accum *adev = gs_alloc_struct(mem, gx_device_pattern_accum, &st_device_pattern_accum, cname); if (adev == 0) return 0; #ifdef DEBUG if (pinst->is_clist) emprintf(mem, "not using clist even though clist is requested\n"); #endif pinst->is_clist = false; (void)gx_device_init((gx_device *)adev, (const gx_device *)&gs_pattern_accum_device, mem, true); adev->instance = pinst; adev->bitmap_memory = storage_memory; fdev = (gx_device_forward *)adev; } else { gx_device_buf_procs_t buf_procs = {dummy_create_buf_device, dummy_size_buf_device, dummy_setup_buf_device, dummy_destroy_buf_device}; gx_device_clist *cdev; gx_device_clist_writer *cwdev; const int data_size = 1024*128; gx_band_params_t band_params = { 0 }; byte *data = gs_alloc_bytes(mem->non_gc_memory, data_size, cname); if (data == NULL) return 0; pinst->is_clist = true; /* NB: band_params.page_uses_transparency is set in clist_make_accum_device */ band_params.BandWidth = pinst->size.x; band_params.BandHeight = pinst->size.y; band_params.BandBufferSpace = 0; cdev = clist_make_accum_device(mem, tdev, "pattern-clist", data, data_size, &buf_procs, &band_params, true, /* use_memory_clist */ pinst->templat.uses_transparency, pinst); if (cdev == 0) { gs_free_object(tdev->memory->non_gc_memory, data, cname); return 0; } cwdev = (gx_device_clist_writer *)cdev; cwdev->finalize = gx_pattern_accum_finalize_cw; set_dev_proc(cwdev, open_device, pattern_clist_open_device); fdev = (gx_device_forward *)cdev; } fdev->log2_align_mod = tdev->log2_align_mod; fdev->pad = tdev->pad; fdev->is_planar = tdev->is_planar; fdev->graphics_type_tag = tdev->graphics_type_tag; fdev->interpolate_control = tdev->interpolate_control; fdev->non_strict_bounds = tdev->non_strict_bounds; gx_device_forward_fill_in_procs(fdev); return fdev; } gx_pattern_trans_t* new_pattern_trans_buff(gs_memory_t *mem) { gx_pattern_trans_t *result; /* Allocate structure that we will use for the trans pattern */ result = gs_alloc_struct(mem, gx_pattern_trans_t, &st_pattern_trans, "new_pattern_trans_buff"); result->transbytes = NULL; result->pdev14 = NULL; result->mem = NULL; result->fill_trans_buffer = NULL; result->buf = NULL; result->n_chan = 0; return(result); } /* * Initialize a pattern accumulator. * Client must already have set instance and bitmap_memory. * * Note that mask and bits accumulators are only created if necessary. */ static int pattern_accum_open(gx_device * dev) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *) dev; const gs_pattern1_instance_t *pinst = padev->instance; gs_memory_t *mem = padev->bitmap_memory; gx_device_memory *mask = 0; gx_device_memory *bits = 0; /* * The client should preset the target, because the device for which the * pattern is being rendered may not (in general, will not) be the same * as the one that was current when the pattern was instantiated. */ gx_device *target = (padev->target == 0 ? gs_currentdevice(pinst->saved) : padev->target); int width = pinst->size.x; int height = pinst->size.y; int code = 0; bool mask_open = false; /* * C's bizarre coercion rules force us to copy HWResolution in pieces * rather than using a single assignment. */ #define PDSET(dev)\ ((dev)->width = width, (dev)->height = height,\ /*(dev)->HWResolution = target->HWResolution*/\ (dev)->HWResolution[0] = target->HWResolution[0],\ (dev)->HWResolution[1] = target->HWResolution[1]) PDSET(padev); padev->color_info = target->color_info; /* Bug 689737: If PaintType == 2 (Uncolored tiling pattern), pattern is * 1bpp bitmap. No antialiasing in this case! */ if (pinst->templat.PaintType == 2) { padev->color_info.anti_alias.text_bits = 1; padev->color_info.anti_alias.graphics_bits = 1; } /* If we have transparency, then fix the color info now so that the mem device allocates the proper buffer space for the pattern template. We can do this since the transparency code all */ if (pinst->templat.uses_transparency) { /* Allocate structure that we will use for the trans pattern */ padev->transbuff = new_pattern_trans_buff(mem); if (padev->transbuff == NULL) return_error(gs_error_VMerror); } else { padev->transbuff = NULL; } if (pinst->uses_mask) { mask = gs_alloc_struct( mem, gx_device_memory, &st_device_memory, "pattern_accum_open(mask)" ); if (mask == 0) return_error(gs_error_VMerror); gs_make_mem_mono_device(mask, mem, 0); PDSET(mask); mask->bitmap_memory = mem; mask->base = 0; code = (*dev_proc(mask, open_device)) ((gx_device *) mask); if (code >= 0) { mask_open = true; memset(mask->base, 0, (size_t)mask->raster * mask->height); } } if (code >= 0) { if (pinst->templat.uses_transparency) { /* In this case, we will grab the buffer created by the graphic state's device (which is pdf14) and we will be tiling that into a transparency group buffer to blend with the pattern accumulator's target. Since all the transparency stuff is planar format, it is best just to keep the data in that form */ gx_device_set_target((gx_device_forward *)padev, target); } else { switch (pinst->templat.PaintType) { case 2: /* uncolored */ gx_device_set_target((gx_device_forward *)padev, target); break; case 1: /* colored */ bits = gs_alloc_struct(mem, gx_device_memory, &st_device_memory, "pattern_accum_open(bits)"); if (bits == 0) code = gs_note_error(gs_error_VMerror); else { gs_make_mem_device(bits, gdev_mem_device_for_bits(padev->color_info.depth), mem, -1, target); PDSET(bits); #undef PDSET bits->color_info = padev->color_info; bits->bitmap_memory = mem; if (target->is_planar > 0) { gx_render_plane_t planes[GX_DEVICE_COLOR_MAX_COMPONENTS]; uchar num_comp = padev->color_info.num_components; uchar i; int depth = target->color_info.depth / target->color_info.num_components; for (i = 0; i < num_comp; i++) { planes[i].shift = depth * (num_comp - 1 - i); planes[i].depth = depth; planes[i].index = i; } code = gdev_mem_set_planar(bits, num_comp, planes); } if (code >= 0) { code = (*dev_proc(bits, open_device)) ((gx_device *) bits); gx_device_set_target((gx_device_forward *)padev, (gx_device *)bits); /* The update_spot_equivalent_color proc for the bits device should forward to the real target device. This will ensure that the target device can get equivalent CMYK values for spot colors if we are using a separation device and the spot color occurs only in patterns on the page. */ bits->procs.update_spot_equivalent_colors = gx_forward_update_spot_equivalent_colors; } } } } } if (code < 0) { if (bits != 0) gs_free_object(mem, bits, "pattern_accum_open(bits)"); if (mask != 0) { if (mask_open) (*dev_proc(mask, close_device)) ((gx_device *) mask); gs_free_object(mem, mask, "pattern_accum_open(mask)"); } return code; } padev->mask = mask; padev->bits = bits; /* Retain the device, so it will survive anomalous grestores. */ gx_device_retain(dev, true); return code; } /* Close an accumulator and free the bits. */ static int pattern_accum_close(gx_device * dev) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *) dev; gs_memory_t *mem = padev->bitmap_memory; /* * If bits != 0, it is the target of the device; reference counting * will close and free it. */ gx_device_set_target((gx_device_forward *)padev, NULL); padev->bits = 0; if (padev->mask != 0) { (*dev_proc(padev->mask, close_device)) ((gx_device *) padev->mask); gs_free_object(mem, padev->mask, "pattern_accum_close(mask)"); padev->mask = 0; } if (padev->transbuff != 0) { gs_free_object(mem,padev->target,"pattern_accum_close(transbuff)"); padev->transbuff = NULL; } /* Un-retain the device now, so reference counting will free it. */ gx_device_retain(dev, false); return 0; } /* _hl_color */ static int pattern_accum_fill_rectangle_hl_color(gx_device *dev, const gs_fixed_rect *rect, const gs_gstate *pgs, const gx_drawing_color *pdcolor, const gx_clip_path *pcpath) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *) dev; int code; if (padev->bits) { code = (*dev_proc(padev->target, fill_rectangle_hl_color)) (padev->target, rect, pgs, pdcolor, pcpath); if (code < 0) return code; } if (padev->mask) { int x, y, w, h; x = fixed2int(rect->p.x); y = fixed2int(rect->p.y); w = fixed2int(rect->q.x) - x; h = fixed2int(rect->q.y) - y; return (*dev_proc(padev->mask, fill_rectangle)) ((gx_device *) padev->mask, x, y, w, h, (gx_color_index) 1); } return 0; } /* Fill a rectangle */ static int pattern_accum_fill_rectangle(gx_device * dev, int x, int y, int w, int h, gx_color_index color) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *) dev; if (padev->bits) (*dev_proc(padev->target, fill_rectangle)) (padev->target, x, y, w, h, color); if (padev->mask) return (*dev_proc(padev->mask, fill_rectangle)) ((gx_device *) padev->mask, x, y, w, h, (gx_color_index) 1); else return 0; } /* Copy a monochrome bitmap. */ static int pattern_accum_copy_mono(gx_device * dev, const byte * data, int data_x, int raster, gx_bitmap_id id, int x, int y, int w, int h, gx_color_index color0, gx_color_index color1) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *) dev; /* opt out early if nothing to render (some may think this a bug) */ if (color0 == gx_no_color_index && color1 == gx_no_color_index) return 0; if (padev->bits) (*dev_proc(padev->target, copy_mono)) (padev->target, data, data_x, raster, id, x, y, w, h, color0, color1); if (padev->mask) { if (color0 != gx_no_color_index) color0 = 1; if (color1 != gx_no_color_index) color1 = 1; if (color0 == 1 && color1 == 1) return (*dev_proc(padev->mask, fill_rectangle)) ((gx_device *) padev->mask, x, y, w, h, (gx_color_index) 1); else return (*dev_proc(padev->mask, copy_mono)) ((gx_device *) padev->mask, data, data_x, raster, id, x, y, w, h, color0, color1); } else return 0; } /* Copy a color bitmap. */ static int pattern_accum_copy_color(gx_device * dev, const byte * data, int data_x, int raster, gx_bitmap_id id, int x, int y, int w, int h) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *) dev; if (padev->bits) (*dev_proc(padev->target, copy_color)) (padev->target, data, data_x, raster, id, x, y, w, h); if (padev->mask) return (*dev_proc(padev->mask, fill_rectangle)) ((gx_device *) padev->mask, x, y, w, h, (gx_color_index) 1); else return 0; } /* Copy a color plane. */ static int pattern_accum_copy_planes(gx_device * dev, const byte * data, int data_x, int raster, gx_bitmap_id id, int x, int y, int w, int h, int plane_height) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *) dev; if (padev->bits) (*dev_proc(padev->target, copy_planes)) (padev->target, data, data_x, raster, id, x, y, w, h, plane_height); if (padev->mask) return (*dev_proc(padev->mask, fill_rectangle)) ((gx_device *) padev->mask, x, y, w, h, (gx_color_index) 1); else return 0; } static int blank_unmasked_bits(gx_device * mask, int polarity, int num_comps, int depth, const gs_int_rect *prect, gs_get_bits_params_t *p) { static const int required_options = GB_COLORS_NATIVE | GB_ALPHA_NONE | GB_RETURN_COPY | GB_ALIGN_STANDARD | GB_OFFSET_0 | GB_RASTER_STANDARD; int raster = p->raster; byte *min; int x0 = prect->p.x; int y0 = prect->p.y; int x, y; int w = prect->q.x - x0; int h = prect->q.y - y0; int code = 0; byte *ptr; int blank = (polarity == GX_CINFO_POLARITY_ADDITIVE ? 255 : 0); gs_int_rect rect; gs_get_bits_params_t params; if ((p->options & required_options) != required_options) return_error(gs_error_rangecheck); min = gs_alloc_bytes(mask->memory, (w+7)>>3, "blank_unmasked_bits"); if (min == NULL) return_error(gs_error_VMerror); rect.p.x = 0; rect.q.x = mask->width; params.x_offset = 0; params.raster = bitmap_raster(mask->width * mask->color_info.depth); if (p->options & GB_PACKING_CHUNKY) { if ((depth & 7) != 0 || depth > 64) { code = gs_note_error(gs_error_rangecheck); goto fail; } ptr = p->data[0]; depth >>= 3; raster -= w*depth; for (y = 0; y < h; y++) { byte *mine; rect.p.y = y+y0; rect.q.y = y+y0+1; params.options = (GB_ALIGN_ANY | (GB_RETURN_COPY | GB_RETURN_POINTER) | GB_OFFSET_0 | GB_RASTER_STANDARD | GB_PACKING_CHUNKY | GB_COLORS_NATIVE | GB_ALPHA_NONE); params.data[0] = min; code = (*dev_proc(mask, get_bits_rectangle))(mask, &rect, ¶ms); if (code < 0) goto fail; mine = params.data[0]; for (x = 0; x < w; x++) { int xx = x+x0; if (((mine[xx>>3]<<(x&7)) & 128) == 0) { switch (depth) { case 8: *ptr++ = blank; case 7: *ptr++ = blank; case 6: *ptr++ = blank; case 5: *ptr++ = blank; case 4: *ptr++ = blank; case 3: *ptr++ = blank; case 2: *ptr++ = blank; case 1: *ptr++ = blank; break; } } else { ptr += depth; } } ptr += raster; } } else { /* Planar, only handle 8 or 16 bits */ int bytes_per_component = (depth/num_comps) >> 3; if (depth/num_comps != 8 && depth/num_comps != 16) { code = gs_note_error(gs_error_rangecheck); goto fail; } for (y = 0; y < h; y++) { int c; byte *mine; rect.p.y = y+y0; rect.q.y = y+y0+1; params.options = (GB_ALIGN_ANY | (GB_RETURN_COPY | GB_RETURN_POINTER) | GB_OFFSET_0 | GB_RASTER_STANDARD | GB_PACKING_CHUNKY | GB_COLORS_NATIVE | GB_ALPHA_NONE); params.data[0] = min; code = (*dev_proc(mask, get_bits_rectangle))(mask, &rect, ¶ms); if (code < 0) goto fail; mine = params.data[0]; for (c = 0; c < num_comps; c++) { if (p->data[c] == NULL) continue; ptr = p->data[c] + raster * y; for (x = 0; x < w; x++) { int xx = x+x0; if (((mine[xx>>3]>>(x&7)) & 1) == 0) { *ptr++ = blank; if (bytes_per_component > 1) *ptr++ = blank; } else { ptr += bytes_per_component; } } } } } fail: gs_free_object(mask->memory, min, "blank_unmasked_bits"); return code; } /* Read back a rectangle of bits. */ /****** SHOULD USE MASK TO DEFINE UNREAD AREA *****/ static int pattern_accum_get_bits_rectangle(gx_device * dev, const gs_int_rect * prect, gs_get_bits_params_t * params) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *) dev; int code; gs_get_bits_params_t params2 = *params; if (padev->bits) { if (padev->mask) params2.options &= ~GB_RETURN_POINTER; code = (*dev_proc(padev->target, get_bits_rectangle)) (padev->target, prect, ¶ms2); /* If we have a mask, then unmarked pixels of the bits * will be undefined. Strictly speaking it makes no * sense for us to return any value here, but the only * caller of this currently is the overprint code, which * uses the the values to parrot back to us. Let's * make sure they are set to the default 'empty' values. */ if (code >= 0 && padev->mask) code = blank_unmasked_bits((gx_device *)padev->mask, padev->target->color_info.polarity, padev->target->color_info.num_components, padev->target->color_info.depth, prect, ¶ms2); return code; } return_error(gs_error_Fatal); /* shouldn't happen */ } /* ------ Color space implementation ------ */ /* Free all entries in a pattern cache. */ static bool pattern_cache_choose_all(gx_color_tile * ctile, void *proc_data) { return true; } static void pattern_cache_free_all(gx_pattern_cache * pcache) { gx_pattern_cache_winnow(pcache, pattern_cache_choose_all, NULL); } /* Allocate a Pattern cache. */ gx_pattern_cache * gx_pattern_alloc_cache(gs_memory_t * mem, uint num_tiles, ulong max_bits) { gx_pattern_cache *pcache = gs_alloc_struct(mem, gx_pattern_cache, &st_pattern_cache, "gx_pattern_alloc_cache(struct)"); gx_color_tile *tiles = gs_alloc_struct_array(mem, num_tiles, gx_color_tile, &st_color_tile_element, "gx_pattern_alloc_cache(tiles)"); uint i; if (pcache == 0 || tiles == 0) { gs_free_object(mem, tiles, "gx_pattern_alloc_cache(tiles)"); gs_free_object(mem, pcache, "gx_pattern_alloc_cache(struct)"); return 0; } pcache->memory = mem; pcache->tiles = tiles; pcache->num_tiles = num_tiles; pcache->tiles_used = 0; pcache->next = 0; pcache->bits_used = 0; pcache->max_bits = max_bits; pcache->free_all = pattern_cache_free_all; for (i = 0; i < num_tiles; tiles++, i++) { tiles->id = gx_no_bitmap_id; /* Clear the pointers to pacify the GC. */ uid_set_invalid(&tiles->uid); tiles->bits_used = 0; #ifdef PACIFY_VALGRIND /* The following memsets are required to avoid a valgrind warning * in: * gs -I./gs/lib -sOutputFile=out.pgm -dMaxBitmap=10000 * -sDEVICE=pgmraw -r300 -Z: -sDEFAULTPAPERSIZE=letter * -dNOPAUSE -dBATCH -K2000000 -dClusterJob -dJOBSERVER * tests_private/ps/ps3cet/11-14.PS * Setting the individual elements of the structures directly is * not enough, which leads me to believe that we are writing the * entire structs out, padding and all. */ memset(&tiles->tbits, 0, sizeof(tiles->tbits)); memset(&tiles->tmask, 0, sizeof(tiles->tmask)); #else tiles->tbits.data = 0; tiles->tmask.data = 0; #endif tiles->index = i; tiles->cdev = NULL; tiles->ttrans = NULL; tiles->is_planar = false; } return pcache; } /* Ensure that an imager has a Pattern cache. */ static int ensure_pattern_cache(gs_gstate * pgs) { if (pgs->pattern_cache == 0) { gx_pattern_cache *pcache = gx_pattern_alloc_cache(pgs->memory, gx_pat_cache_default_tiles(), gx_pat_cache_default_bits()); if (pcache == 0) return_error(gs_error_VMerror); pgs->pattern_cache = pcache; } return 0; } /* Free pattern cache and its components. */ void gx_pattern_cache_free(gx_pattern_cache *pcache) { if (pcache == NULL) return; pattern_cache_free_all(pcache); gs_free_object(pcache->memory, pcache->tiles, "gx_pattern_cache_free"); pcache->tiles = NULL; gs_free_object(pcache->memory, pcache, "gx_pattern_cache_free"); } /* Get and set the Pattern cache in a gstate. */ gx_pattern_cache * gstate_pattern_cache(gs_gstate * pgs) { return pgs->pattern_cache; } void gstate_set_pattern_cache(gs_gstate * pgs, gx_pattern_cache * pcache) { pgs->pattern_cache = pcache; } /* Free a Pattern cache entry. */ /* This will not free a pattern if it is 'locked' which should only be for */ /* a stroke pattern during fill_stroke_path. */ static void gx_pattern_cache_free_entry(gx_pattern_cache * pcache, gx_color_tile * ctile) { gx_device *temp_device; if ((ctile->id != gx_no_bitmap_id) && !ctile->is_dummy && !ctile->is_locked) { gs_memory_t *mem = pcache->memory; /* * We must initialize the memory device properly, even though * we aren't using it for drawing. */ if (ctile->tmask.data != 0) { gs_free_object(mem, ctile->tmask.data, "free_pattern_cache_entry(mask data)"); ctile->tmask.data = 0; /* for GC */ } if (ctile->tbits.data != 0) { gs_free_object(mem, ctile->tbits.data, "free_pattern_cache_entry(bits data)"); ctile->tbits.data = 0; /* for GC */ } if (ctile->cdev != NULL) { ctile->cdev->common.do_not_open_or_close_bandfiles = false; /* make sure memfile gets freed/closed */ dev_proc(&ctile->cdev->common, close_device)((gx_device *)&ctile->cdev->common); /* Free up the icc based stuff in the clist device. I am puzzled why the other objects are not released */ clist_free_icc_table(ctile->cdev->common.icc_table, ctile->cdev->common.memory); ctile->cdev->common.icc_table = NULL; rc_decrement(ctile->cdev->common.icc_cache_cl, "gx_pattern_cache_free_entry"); ctile->cdev->common.icc_cache_cl = NULL; ctile->cdev->writer.pinst = NULL; gs_free_object(ctile->cdev->common.memory->non_gc_memory, ctile->cdev->common.cache_chunk, "free tile cache for clist"); ctile->cdev->common.cache_chunk = 0; temp_device = (gx_device *)ctile->cdev; gx_device_retain(temp_device, false); ctile->cdev = NULL; } if (ctile->ttrans != NULL) { if_debug2m('v', mem, "[v*] Freeing trans pattern from cache, uid = %ld id = %ld\n", ctile->uid.id, ctile->id); if ( ctile->ttrans->pdev14 == NULL) { /* This can happen if we came from the clist */ if (ctile->ttrans->mem != NULL) gs_free_object(ctile->ttrans->mem ,ctile->ttrans->transbytes, "free_pattern_cache_entry(transbytes)"); gs_free_object(mem,ctile->ttrans->fill_trans_buffer, "free_pattern_cache_entry(fill_trans_buffer)"); ctile->ttrans->transbytes = NULL; ctile->ttrans->fill_trans_buffer = NULL; } else { dev_proc(ctile->ttrans->pdev14, close_device)((gx_device *)ctile->ttrans->pdev14); temp_device = (gx_device *)(ctile->ttrans->pdev14); gx_device_retain(temp_device, false); rc_decrement(temp_device,"gx_pattern_cache_free_entry"); ctile->ttrans->pdev14 = NULL; ctile->ttrans->transbytes = NULL; /* should be ok due to pdf14_close */ ctile->ttrans->fill_trans_buffer = NULL; /* This is always freed */ } gs_free_object(mem, ctile->ttrans, "free_pattern_cache_entry(ttrans)"); ctile->ttrans = NULL; } pcache->tiles_used--; pcache->bits_used -= ctile->bits_used; ctile->id = gx_no_bitmap_id; } } /* Historically, the pattern cache has used a very simple hashing scheme whereby pattern A goes into slot idx = (A.id % num_tiles). Unfortunately, now we allow tiles to be 'locked' into the pattern cache, we might run into the case where we want both tiles A and B to be in the cache at once where: (A.id % num_tiles) == (B.id % num_tiles). We have a maximum of 2 locked tiles, and one of those can be placed while the other one is locked. So we only need to cope with a single 'collision'. We therefore allow tiles to either go in at idx or at (idx + 1) % num_tiles. This means we need to be prepared to search a bit further for them, hence we now have 2 helper functions to do this. */ /* We can have at most 1 locked tile while looking for a place to * put another tile. */ gx_color_tile * gx_pattern_cache_find_tile_for_id(gx_pattern_cache *pcache, gs_id id) { gx_color_tile *ctile = &pcache->tiles[id % pcache->num_tiles]; gx_color_tile *ctile2 = &pcache->tiles[(id+1) % pcache->num_tiles]; if (ctile->id == id || ctile->id == gs_no_id) return ctile; if (ctile2->id == id || ctile2->id == gs_no_id) return ctile2; if (!ctile->is_locked) return ctile; return ctile2; } /* Given the size of a new pattern tile, free entries from the cache until */ /* enough space is available (or nothing left to free). */ /* This will allow 1 oversized entry */ void gx_pattern_cache_ensure_space(gs_gstate * pgs, size_t needed) { int code = ensure_pattern_cache(pgs); gx_pattern_cache *pcache; int start_free_id; if (code < 0) return; /* no cache -- just exit */ pcache = pgs->pattern_cache; start_free_id = pcache->next; /* for scan wrap check */ /* If too large then start freeing entries */ /* By starting just after 'next', we attempt to first free the oldest entries */ while (pcache->bits_used + needed > pcache->max_bits && pcache->bits_used != 0) { pcache->next = (pcache->next + 1) % pcache->num_tiles; gx_pattern_cache_free_entry(pcache, &pcache->tiles[pcache->next]); /* since a pattern may be temporarily locked (stroke pattern for fill_stroke_path) */ /* we may not have freed all entries even though we've scanned the entire cache. */ /* The following check for wrapping prevents infinite loop if stroke pattern was */ /* larger than pcache->max_bits, */ if (pcache->next == start_free_id) break; /* we wrapped -- cache may not be empty */ } } /* Export updating the pattern_cache bits_used and tiles_used for clist reading */ void gx_pattern_cache_update_used(gs_gstate *pgs, size_t used) { gx_pattern_cache *pcache = pgs->pattern_cache; pcache->bits_used += used; pcache->tiles_used++; } /* * Add a Pattern cache entry. This is exported for the interpreter. * Note that this does not free any of the data in the accumulator * device, but it may zero out the bitmap_memory pointers to prevent * the accumulated bitmaps from being freed when the device is closed. */ static void make_bitmap(gx_strip_bitmap *, const gx_device_memory *, gx_bitmap_id, const gs_memory_t *); int gx_pattern_cache_add_entry(gs_gstate * pgs, gx_device_forward * fdev, gx_color_tile ** pctile, gs_gstate* saved) { gx_pattern_cache *pcache; const gs_pattern1_instance_t *pinst; ulong used = 0, mask_used = 0, trans_used = 0; gx_bitmap_id id; gx_color_tile *ctile; int code = ensure_pattern_cache(pgs); gx_device_memory *mmask = NULL; gx_device_memory *mbits = NULL; gx_pattern_trans_t *trans = NULL; int size_b, size_c; if (code < 0) return code; pcache = pgs->pattern_cache; if (dev_proc(fdev, open_device) != pattern_clist_open_device) { gx_device_pattern_accum *padev = (gx_device_pattern_accum *)fdev; mbits = padev->bits; mmask = padev->mask; pinst = padev->instance; trans = padev->transbuff; /* * Check whether the pattern completely fills its box. * If so, we can avoid the expensive masking operations * when using the pattern. */ /* Bug 700624: In cases where the mask is completely full, * but the pattern cells are separated from one another, * we need to leave gaps between the cells when rendering * them. Sadly, the graphics library can't cope with this * in the no-mask case. Therefore, only do the optimisation * of not sending the mask if the step matrix is suitable. * * To do this, we compare the step matrix to the size. My * belief is that the mask will only ever be full if it's * orthogonal, cos otherwise the edges will be clipped, * hence we lose no generality by checking for .xy and .yx * being 0. */ if (mmask != 0 && fabsf(pinst->step_matrix.xx) <= pinst->size.x && fabsf(pinst->step_matrix.yy) <= pinst->size.y && pinst->step_matrix.xy == 0 && pinst->step_matrix.yx == 0) { int y; int w_less_8 = mmask->width-8; for (y = 0; y < mmask->height; y++) { const byte *row = scan_line_base(mmask, y); int w; for (w = w_less_8; w > 0; w -= 8) if (*row++ != 0xff) goto keep; w += 8; if ((*row | (0xff >> w)) != 0xff) goto keep; } /* We don't need a mask. */ mmask = 0; keep:; } /* Need to get size of buffers that are being added to the cache */ if (mbits != 0) gdev_mem_bitmap_size(mbits, &used); if (mmask != 0) { gdev_mem_bitmap_size(mmask, &mask_used); used += mask_used; } if (trans != 0) { trans_used = (size_t)trans->planestride*trans->n_chan; used += trans_used; } } else { gx_device_clist *cdev = (gx_device_clist *)fdev; gx_device_clist_writer * cldev = (gx_device_clist_writer *)cdev; code = clist_end_page(cldev); if (code < 0) return code; pinst = cdev->writer.pinst; size_b = clist_data_size(cdev, 0); if (size_b < 0) return_error(gs_error_unregistered); size_c = clist_data_size(cdev, 1); if (size_c < 0) return_error(gs_error_unregistered); /* The memfile size is the size, not the size determined by the depth*width*height */ used = size_b + size_c; } id = pinst->id; ctile = gx_pattern_cache_find_tile_for_id(pcache, id); gx_pattern_cache_free_entry(pcache, ctile); /* ensure that this cache slot is empty */ ctile->id = id; ctile->is_planar = pinst->is_planar; ctile->depth = fdev->color_info.depth; ctile->uid = pinst->templat.uid; ctile->tiling_type = pinst->templat.TilingType; ctile->step_matrix = pinst->step_matrix; ctile->bbox = pinst->bbox; ctile->is_simple = pinst->is_simple; ctile->has_overlap = pinst->has_overlap; ctile->is_dummy = false; ctile->is_locked = false; if (pinst->templat.uses_transparency) { /* to work with pdfi get the blend mode out of the saved pgs device */ ctile->blending_mode = ((pdf14_device*)(saved->device))->blend_mode; } else ctile->blending_mode = 0; ctile->trans_group_popped = false; if (dev_proc(fdev, open_device) != pattern_clist_open_device) { if (mbits != 0) { make_bitmap(&ctile->tbits, mbits, gs_next_ids(pgs->memory, 1), pgs->memory); mbits->bitmap_memory = 0; /* don't free the bits */ } else ctile->tbits.data = 0; if (mmask != 0) { make_bitmap(&ctile->tmask, mmask, id, pgs->memory); mmask->bitmap_memory = 0; /* don't free the bits */ } else ctile->tmask.data = 0; if (trans != 0) { if_debug2m('v', pgs->memory, "[v*] Adding trans pattern to cache, uid = %ld id = %ld\n", ctile->uid.id, ctile->id); ctile->ttrans = trans; } ctile->cdev = NULL; } else { gx_device_clist *cdev = (gx_device_clist *)fdev; gx_device_clist_writer *cwdev = (gx_device_clist_writer *)fdev; ctile->tbits.data = 0; ctile->tbits.size.x = 0; ctile->tbits.size.y = 0; ctile->tmask.data = 0; ctile->tmask.size.x = 0; ctile->tmask.size.y = 0; ctile->cdev = cdev; /* Prevent freeing files on pattern_paint_cleanup : */ cwdev->do_not_open_or_close_bandfiles = true; } /* In the clist case, used is accurate. In the non-clist case, it may * not be. The important thing is that we account the same for tiles * going in and coming out of the cache. Therefore we store the used * figure in the tile so we always remove the same amount. */ ctile->bits_used = used; gx_pattern_cache_update_used(pgs, used); *pctile = ctile; return 0; } /* set or clear the 'is_locked' flag for a tile in the cache. Used by */ /* fill_stroke_path to make sure a large stroke pattern stays in the */ /* cache even if the fill is also a pattern. */ int gx_pattern_cache_entry_set_lock(gs_gstate *pgs, gs_id id, bool new_lock_value) { gx_color_tile *ctile; int code = ensure_pattern_cache(pgs); if (code < 0) return code; ctile = gx_pattern_cache_find_tile_for_id(pgs->pattern_cache, id); if (ctile == NULL) return_error(gs_error_undefined); ctile->is_locked = new_lock_value; return 0; } /* Get entry for reading a pattern from clist. */ int gx_pattern_cache_get_entry(gs_gstate * pgs, gs_id id, gx_color_tile ** pctile) { gx_pattern_cache *pcache; gx_color_tile *ctile; int code = ensure_pattern_cache(pgs); if (code < 0) return code; pcache = pgs->pattern_cache; ctile = gx_pattern_cache_find_tile_for_id(pcache, id); gx_pattern_cache_free_entry(pgs->pattern_cache, ctile); ctile->id = id; *pctile = ctile; return 0; } bool gx_pattern_tile_is_clist(gx_color_tile *ptile) { return ptile != NULL && ptile->cdev != NULL; } /* Add a dummy Pattern cache entry. Stubs a pattern tile for interpreter when device handles high level patterns. */ int gx_pattern_cache_add_dummy_entry(gs_gstate *pgs, gs_pattern1_instance_t *pinst, int depth) { gx_color_tile *ctile; gx_pattern_cache *pcache; gx_bitmap_id id = pinst->id; int code = ensure_pattern_cache(pgs); if (code < 0) return code; pcache = pgs->pattern_cache; ctile = gx_pattern_cache_find_tile_for_id(pcache, id); gx_pattern_cache_free_entry(pcache, ctile); ctile->id = id; ctile->depth = depth; ctile->uid = pinst->templat.uid; ctile->tiling_type = pinst->templat.TilingType; ctile->step_matrix = pinst->step_matrix; ctile->bbox = pinst->bbox; ctile->is_simple = pinst->is_simple; ctile->has_overlap = pinst->has_overlap; ctile->is_dummy = true; ctile->is_locked = false; memset(&ctile->tbits, 0 , sizeof(ctile->tbits)); ctile->tbits.size = pinst->size; ctile->tbits.id = gs_no_bitmap_id; memset(&ctile->tmask, 0 , sizeof(ctile->tmask)); ctile->cdev = NULL; ctile->ttrans = NULL; ctile->bits_used = 0; pcache->tiles_used++; return 0; } #if RAW_PATTERN_DUMP /* Debug dump of pattern image data. Saved in interleaved form with global indexing in file name */ static void dump_raw_pattern(int height, int width, int n_chan, int depth, byte *Buffer, int raster, const gx_device_memory * mdev, const gs_memory_t *memory) { char full_file_name[50]; gp_file *fid; int max_bands; int j, k, m; int byte_number, bit_position; unsigned char current_byte; unsigned char output_val; bool is_planar; byte *curr_ptr = Buffer; int plane_offset; is_planar = mdev->is_planar; max_bands = ( n_chan < 57 ? n_chan : 56); /* Photoshop handles at most 56 bands */ if (is_planar) { gs_snprintf(full_file_name, sizeof(full_file_name), "%d)PATTERN_PLANE_%dx%dx%d.raw", global_pat_index, mdev->raster, height, max_bands); } else { gs_snprintf(full_file_name, sizeof(full_file_name), "%d)PATTERN_CHUNK_%dx%dx%d.raw", global_pat_index, width, height, max_bands); } fid = gp_fopen(memory,full_file_name,"wb"); if (depth >= 8) { /* Contone data. */ if (is_planar) { for (m = 0; m < max_bands; m++) { curr_ptr = mdev->line_ptrs[m*mdev->height]; gp_fwrite(curr_ptr, 1, mdev->height * mdev->raster, fid); } } else { /* Just dump it like it is */ gp_fwrite(Buffer, 1, max_bands * height * width, fid); } } else { /* Binary Data. Lets get to 8 bit for debugging. We have to worry about planar vs. chunky. Note this assumes 1 bit data only. */ if (is_planar) { plane_offset = mdev->raster * mdev->height; for (m = 0; m < max_bands; m++) { curr_ptr = mdev->line_ptrs[m*mdev->height]; for (j = 0; j < height; j++) { for (k = 0; k < width; k++) { byte_number = (int) ceil((( (float) k + 1.0) / 8.0)) - 1; current_byte = curr_ptr[j*(mdev->raster) + byte_number]; bit_position = 7 - (k - byte_number*8); output_val = ((current_byte >> bit_position) & 0x1) * 255; gp_fwrite(&output_val,1,1,fid); } } } } else { for (j = 0; j < height; j++) { for (k = 0; k < width; k++) { for (m = 0; m < max_bands; m++) { /* index current byte */ byte_number = (int) ceil((( (float) k * (float) max_bands + (float) m + 1.0) / 8.0)) - 1; /* get byte of interest */ current_byte = curr_ptr[j*(mdev->raster) + byte_number]; /* get bit position */ bit_position = 7 - (k * max_bands + m - byte_number * 8); /* extract and create byte */ output_val = ((current_byte >> bit_position) & 0x1) * 255; gp_fwrite(&output_val,1,1,fid); } } } } } gp_fclose(fid); } #endif static void make_bitmap(register gx_strip_bitmap * pbm, const gx_device_memory * mdev, gx_bitmap_id id, const gs_memory_t *memory) { pbm->data = mdev->base; pbm->raster = mdev->raster; pbm->rep_width = pbm->size.x = mdev->width; pbm->rep_height = pbm->size.y = mdev->height; pbm->id = id; pbm->rep_shift = pbm->shift = 0; pbm->num_planes = (mdev->is_planar ? mdev->color_info.num_components : 1); /* Lets dump this for debug purposes */ #if RAW_PATTERN_DUMP dump_raw_pattern(pbm->rep_height, pbm->rep_width, mdev->color_info.num_components, mdev->color_info.depth, (unsigned char*) mdev->base, pbm->raster, mdev, memory); global_pat_index++; #endif } /* Purge selected entries from the pattern cache. */ void gx_pattern_cache_winnow(gx_pattern_cache * pcache, bool(*proc) (gx_color_tile * ctile, void *proc_data), void *proc_data) { uint i; if (pcache == 0) /* no cache created yet */ return; for (i = 0; i < pcache->num_tiles; ++i) { gx_color_tile *ctile = &pcache->tiles[i]; ctile->is_locked = false; /* force freeing */ if (ctile->id != gx_no_bitmap_id && (*proc) (ctile, proc_data)) gx_pattern_cache_free_entry(pcache, ctile); } } /* blank the pattern accumulator device assumed to be in the graphics state */ int gx_erase_colored_pattern(gs_gstate *pgs) { int code; gx_device_pattern_accum *pdev = (gx_device_pattern_accum *)gs_currentdevice(pgs); if ((code = gs_gsave(pgs)) < 0) return code; if ((code = gs_setgray(pgs, 1.0)) >= 0) { gs_rect rect; gx_device_memory *mask; static const gs_matrix identity = { 1, 0, 0, 1, 0, 0 }; pgs->log_op = lop_default; rect.p.x = 0.0; rect.p.y = 0.0; rect.q.x = (double)pdev->width; rect.q.y = (double)pdev->height; code = gs_setmatrix(pgs, &identity); if (code < 0) { gs_grestore_only(pgs); return code; } /* we don't want the fill rectangle device call to use the mask */ mask = pdev->mask; pdev->mask = NULL; code = gs_rectfill(pgs, &rect, 1); /* restore the mask */ pdev->mask = mask; if (code < 0) { gs_grestore_only(pgs); return code; } } /* we don't need wraparound here */ gs_grestore_only(pgs); return code; } /* Reload a (non-null) Pattern color into the cache. */ /* *pdc is already set, except for colors.pattern.p_tile and mask.m_tile. */ int gx_pattern_load(gx_device_color * pdc, const gs_gstate * pgs, gx_device * dev, gs_color_select_t select) { gx_device_forward *adev = NULL; gs_pattern1_instance_t *pinst = (gs_pattern1_instance_t *)pdc->ccolor.pattern; gs_gstate *saved; gx_color_tile *ctile; gs_memory_t *mem = pgs->memory; bool has_tags = device_encodes_tags(dev); int code; if (pgs->pattern_cache == NULL) if ((code = ensure_pattern_cache((gs_gstate *) pgs))< 0) /* break const for call */ return code; if (gx_pattern_cache_lookup(pdc, pgs, dev, select)) return 0; /* Get enough space in the cache for this pattern (estimated if it is a clist) */ gx_pattern_cache_ensure_space((gs_gstate *)pgs, gx_pattern_size_estimate(pinst, has_tags)); /* * Note that adev is an internal device, so it will be freed when the * last reference to it from a graphics state is deleted. */ adev = gx_pattern_accum_alloc(mem, pgs->pattern_cache->memory, pinst, "gx_pattern_load"); if (adev == 0) return_error(gs_error_VMerror); gx_device_set_target((gx_device_forward *)adev, dev); code = dev_proc(adev, open_device)((gx_device *)adev); if (code < 0) { gs_free_object(mem, adev, "gx_pattern_load"); return code; } saved = gs_gstate_copy(pinst->saved, pinst->saved->memory); if (saved == 0) { code = gs_note_error(gs_error_VMerror); goto fail; } if (saved->pattern_cache == 0) saved->pattern_cache = pgs->pattern_cache; code = gs_setdevice_no_init(saved, (gx_device *)adev); if (code < 0) goto fail; if (pinst->templat.uses_transparency) { if_debug1m('v', mem, "gx_pattern_load: pushing the pdf14 compositor device into this graphics state pat_id = %ld\n", pinst->id); if ((code = gs_push_pdf14trans_device(saved, true, false, 0, 0)) < 0) /* spot_color_count taken from pdf14 target values */ return code; saved->device->is_open = true; } else { /* For colored patterns we clear the pattern device's background. This is necessary for the anti aliasing code and (unfortunately) it masks a difficult to fix UMR affecting pcl patterns, see bug #690487. Note we have to make a similar change in zpcolor.c where much of this pattern code is duplicated to support high level stream patterns. */ if (pinst->templat.PaintType == 1 && !(pinst->is_clist) && dev_proc(pinst->saved->device, dev_spec_op)(pinst->saved->device, gxdso_pattern_can_accum, NULL, 0) == 0) if ((code = gx_erase_colored_pattern(saved)) < 0) goto fail; } code = (*pinst->templat.PaintProc)(&pdc->ccolor, saved); if (code < 0) { if (dev_proc(adev, open_device) == pattern_accum_open) { // free pattern cache data that never got added to the dictionary gx_device_pattern_accum *padev = (gx_device_pattern_accum *) adev; if ((padev->bits != NULL) && (padev->bits->base != NULL)) { gs_free_object(padev->bits->memory, padev->bits->base, "mem_open"); } } /* RJW: At this point, in the non transparency case, * saved->device == adev. So unretain it, close it, and the * gs_gstate_free(saved) will remove it. In the transparency case, * saved->device = the pdf14 device. So we need to unretain it, * close adev, and finally close saved->device. */ gx_device_retain(saved->device, false); /* device no longer retained */ if (pinst->templat.uses_transparency) { if (pinst->is_clist == 0) { gs_free_object(((gx_device_pattern_accum *)adev)->bitmap_memory, ((gx_device_pattern_accum *)adev)->transbuff, "gx_pattern_load"); ((gx_device_pattern_accum *)adev)->transbuff = NULL; } dev_proc(adev, close_device)((gx_device *)adev); /* adev was the target of the pdf14 device, so also is no longer retained */ gx_device_retain((gx_device *)adev, false); /* device no longer retained */ } dev_proc(saved->device, close_device)((gx_device *)saved->device); /* Freeing the state should now free the device which may be the pdf14 compositor. */ gs_gstate_free_chain(saved); if (code == gs_error_handled) code = 0; return code; } if (pinst->templat.uses_transparency) { /* if_debug0m('v', saved->memory, "gx_pattern_load: popping the pdf14 compositor device from this graphics state\n"); if ((code = gs_pop_pdf14trans_device(saved, true)) < 0) return code; */ if (pinst->is_clist) { /* Send the compositor command to close the PDF14 device */ code = gs_pop_pdf14trans_device(saved, true); if (code < 0) goto fail; } else { /* Not a clist, get PDF14 buffer information */ code = pdf14_get_buffer_information(saved->device, ((gx_device_pattern_accum*)adev)->transbuff, saved->memory, true); /* PDF14 device (and buffer) is destroyed when pattern cache entry is removed */ if (code < 0) goto fail; } } /* We REALLY don't like the following cast.... */ code = gx_pattern_cache_add_entry((gs_gstate *)pgs, adev, &ctile, saved); if (code >= 0) { if (!gx_pattern_cache_lookup(pdc, pgs, dev, select)) { mlprintf(mem, "Pattern cache lookup failed after insertion!\n"); code = gs_note_error(gs_error_Fatal); } } #ifdef DEBUG if (gs_debug_c('B') && dev_proc(adev, open_device) == pattern_accum_open) { gx_device_pattern_accum *pdev = (gx_device_pattern_accum *)adev; if (pdev->mask) debug_dump_bitmap(pdev->memory, pdev->mask->base, pdev->mask->raster, pdev->mask->height, "[B]Pattern mask"); if (pdev->bits) debug_dump_bitmap(pdev->memory, ((gx_device_memory *) pdev->target)->base, ((gx_device_memory *) pdev->target)->raster, pdev->target->height, "[B]Pattern bits"); } #endif /* Free the bookkeeping structures, except for the bits and mask */ /* data iff they are still needed. */ dev_proc(adev, close_device)((gx_device *)adev); /* Free the chain of gstates. Freeing the state will free the device. */ gs_gstate_free_chain(saved); return code; fail: if (dev_proc(adev, open_device) == pattern_accum_open) { // free pattern cache data that never got added to the dictionary gx_device_pattern_accum *padev = (gx_device_pattern_accum *) adev; if ((padev->bits != NULL) && (padev->bits->base != NULL)) { gs_free_object(padev->bits->memory, padev->bits->base, "mem_open"); } } if (dev_proc(adev, open_device) == pattern_clist_open_device) { gx_device_clist *cdev = (gx_device_clist *)adev; gs_free_object(cdev->writer.bandlist_memory, cdev->common.data, "gx_pattern_load"); cdev->common.data = 0; } dev_proc(adev, close_device)((gx_device *)adev); gx_device_set_target(adev, NULL); rc_decrement(adev, "gx_pattern_load"); gs_gstate_free_chain(saved); return code; } /* Remap a PatternType 1 color. */ cs_proc_remap_color(gx_remap_Pattern); /* check the prototype */ int gs_pattern1_remap_color(const gs_client_color * pc, const gs_color_space * pcs, gx_device_color * pdc, const gs_gstate * pgs, gx_device * dev, gs_color_select_t select) { gs_pattern1_instance_t *pinst = (gs_pattern1_instance_t *)pc->pattern; int code; /* Save original color space and color info into dev color */ pdc->ccolor = *pc; pdc->ccolor_valid = true; if (pinst == 0) { /* Null pattern */ color_set_null_pattern(pdc); return 0; } if (pinst->templat.PaintType == 2) { /* uncolored */ if (pcs->base_space) { if (dev->icc_struct != NULL && dev->icc_struct->blackvector) { gs_client_color temppc; gs_color_space *graycs = gs_cspace_new_DeviceGray(pgs->memory); if (graycs == NULL) { code = (pcs->base_space->type->remap_color) (pc, pcs->base_space, pdc, pgs, dev, select); } else { if (gsicc_is_white_blacktextvec((gs_gstate*) pgs, dev, (gs_color_space*) pcs, (gs_client_color*) pc)) temppc.paint.values[0] = 1.0; else temppc.paint.values[0] = 0.0; code = (graycs->type->remap_color) (&temppc, graycs, pdc, pgs, dev, select); rc_decrement_cs(graycs, "gs_pattern1_remap_color"); } } else { code = (pcs->base_space->type->remap_color) (pc, pcs->base_space, pdc, pgs, dev, select); } } else code = gs_note_error(gs_error_unregistered); if (code < 0) return code; if (pdc->type == gx_dc_type_pure) pdc->type = &gx_dc_pure_masked; else if (pdc->type == gx_dc_type_ht_binary) pdc->type = &gx_dc_binary_masked; else if (pdc->type == gx_dc_type_ht_colored) pdc->type = &gx_dc_colored_masked; else if (pdc->type == gx_dc_type_devn) pdc->type = &gx_dc_devn_masked; else return_error(gs_error_unregistered); } else color_set_null_pattern(pdc); pdc->mask.id = pinst->id; pdc->mask.m_tile = 0; return gx_pattern_load(pdc, pgs, dev, select); } int pattern_accum_dev_spec_op(gx_device *dev, int dso, void *data, int size) { gx_device_pattern_accum *const padev = (gx_device_pattern_accum *)dev; const gs_pattern1_instance_t *pinst = padev->instance; gx_device *target = (padev->target == 0 ? gs_currentdevice(pinst->saved) : padev->target); if (dso == gxdso_in_pattern_accumulator) return (pinst->templat.PaintType == 2 ? 2 : 1); if (dso == gxdso_get_dev_param) { dev_param_req_t *request = (dev_param_req_t *)data; gs_param_list * plist = (gs_param_list *)request->list; bool bool_true = 1; if (strcmp(request->Param, "NoInterpolateImagemasks") == 0) { return param_write_bool(plist, "NoInterpolateImagemasks", &bool_true); } } /* Bug 704670. Pattern accumulator should not allow whatever targets lie beneath it to do any bbox adjustments. If we are here, the pattern accumulator is actually drawing into a buffer and it is not accumulating into a clist device. In this case, if it was a pattern clist, we would be going to the special op for the clist device of the pattern, which will have the proper extent and adjust the bbox. Here we just need to clip to the buffer into which we are drawing */ if (dso == gxdso_restrict_bbox) { gs_int_rect* ibox = (gs_int_rect*)data; if (ibox->p.y < 0) ibox->p.y = 0; if (ibox->q.y > padev->height) ibox->q.y = padev->height; if (ibox->p.x < 0) ibox->p.x = 0; if (ibox->q.x > padev->width) ibox->q.x = padev->width; return 0; } return dev_proc(target, dev_spec_op)(target, dso, data, size); }