/* Copyright (C) 2001-2021 Artifex Software, Inc. All Rights Reserved. This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of the license contained in the file LICENSE in this distribution. Refer to licensing information at http://www.artifex.com or contact Artifex Software, Inc., 1305 Grant Avenue - Suite 200, Novato, CA 94945, U.S.A., +1(415)492-9861, for further information. */ /* Command list reading for Ghostscript. */ #include "memory_.h" #include "gx.h" #include "gp.h" /* for gp_fmode_rb */ #include "gpcheck.h" #include "gserrors.h" #include "gxdevice.h" #include "gscoord.h" /* requires gsmatrix.h */ #include "gsdevice.h" /* for gs_deviceinitialmatrix */ #include "gxdevmem.h" /* must precede gxcldev.h */ #include "gxcldev.h" #include "gxgetbit.h" #include "gxhttile.h" #include "gdevplnx.h" #include "gdevp14.h" #include "gsmemory.h" #include "gsicc_cache.h" /* * We really don't like the fact that gdevprn.h is included here, since * command lists are supposed to be usable for purposes other than printer * devices; but gdev_prn_color_usage and gdev_create_buf_device are * currently only applicable to printer devices. */ #include "gdevprn.h" #include "stream.h" #include "strimpl.h" /* forward decl */ private_st_clist_icctable_entry(); private_st_clist_icctable(); /* ------ Band file reading stream ------ */ #ifdef DEBUG /* An auxiliary table for mapping clist buffer offsets to cfile offsets. */ typedef struct { uint buffered; int64_t file_offset; } cbuf_offset_map_elem; #endif /* * To separate banding per se from command list interpretation, * we make the command list interpreter simply read from a stream. * When we are actually doing banding, the stream filters the band file * and only passes through the commands for the current bands (or band * ranges that include a current band). */ typedef struct stream_band_read_state_s { stream_state_common; gx_band_page_info_t page_info; int band_first, band_last; uint left; /* amount of data left in this run */ cmd_block b_this; gs_memory_t *local_memory; #ifdef DEBUG bool skip_first; cbuf_offset_map_elem *offset_map; int offset_map_length; int offset_map_max_length; #endif } stream_band_read_state; static int s_band_read_init(stream_state * st) { stream_band_read_state *const ss = (stream_band_read_state *) st; const clist_io_procs_t *io_procs = ss->page_info.io_procs; ss->left = 0; ss->b_this.band_min = 0; ss->b_this.band_max = 0; ss->b_this.pos = 0; return io_procs->rewind(ss->page_bfile, false, ss->page_bfname); } #ifdef DEBUG static int s_band_read_init_offset_map(gx_device_clist_reader *crdev, stream_state * st) { stream_band_read_state *const ss = (stream_band_read_state *) st; if (gs_debug_c('L')) { ss->offset_map_length = 0; ss->offset_map_max_length = cbuf_size + 1; /* fixme: Wanted a more accurate implementation. */ ss->offset_map = (cbuf_offset_map_elem *)gs_alloc_byte_array(crdev->memory, ss->offset_map_max_length, sizeof(*ss->offset_map), "s_band_read_init_offset_map"); if (ss->offset_map == NULL) return_error(gs_error_VMerror); ss->offset_map[0].buffered = 0; crdev->offset_map = ss->offset_map; /* Prevent collecting it as garbage. Debugged with ppmraw -r300 014-09.ps . */ } else { ss->offset_map_length = 0; ss->offset_map_max_length = 0; ss->offset_map = NULL; crdev->offset_map = NULL; } ss->skip_first = true; return 0; } static void s_band_read_dnit_offset_map(gx_device_clist_reader *crdev, stream_state * st) { if (gs_debug_c('L')) { stream_band_read_state *const ss = (stream_band_read_state *) st; gs_free_object(crdev->memory, ss->offset_map, "s_band_read_dnit_offset_map"); crdev->offset_map = 0; } } #endif static int s_band_read_process(stream_state * st, stream_cursor_read * ignore_pr, stream_cursor_write * pw, bool last) { stream_band_read_state *const ss = (stream_band_read_state *) st; register byte *q = pw->ptr; byte *wlimit = pw->limit; clist_file_ptr cfile = ss->page_cfile; clist_file_ptr bfile = ss->page_bfile; uint left = ss->left; int status = 1; uint count; const clist_io_procs_t *io_procs = ss->page_info.io_procs; while ((count = wlimit - q) != 0) { if (left) { /* Read more data for the current run. */ if (count > left) count = left; # ifdef DEBUG if (gs_debug_c('L')) ss->offset_map[ss->offset_map_length - 1].buffered += count; # endif io_procs->fread_chars(q + 1, count, cfile); if (io_procs->ferror_code(cfile) < 0) { status = ERRC; break; } q += count; left -= count; process_interrupts(ss->local_memory); continue; } rb: /* * Scan for the next run for the current bands (or a band range * that includes a current band). */ if (ss->b_this.band_min == cmd_band_end && io_procs->ftell(bfile) == ss->page_bfile_end_pos ) { status = EOFC; break; } { int bmin = ss->b_this.band_min; int bmax = ss->b_this.band_max; int64_t pos = ss->b_this.pos; int nread; nread = io_procs->fread_chars(&ss->b_this, sizeof(ss->b_this), bfile); if (nread < sizeof(ss->b_this)) { DISCARD(gs_note_error(gs_error_unregistered)); /* Must not happen. */ return ERRC; } if (!(ss->band_last >= bmin && ss->band_first <= bmax)) goto rb; io_procs->fseek(cfile, pos, SEEK_SET, ss->page_cfname); left = (uint) (ss->b_this.pos - pos); # ifdef DEBUG if (left > 0 && gs_debug_c('L')) { if (ss->offset_map_length >= ss->offset_map_max_length) { DISCARD(gs_note_error(gs_error_unregistered)); /* Must not happen. */ return ERRC; } ss->offset_map[ss->offset_map_length].file_offset = pos; ss->offset_map[ss->offset_map_length].buffered = 0; ss->offset_map_length++; } # endif if_debug5m('l', ss->local_memory, "[l]reading for bands (%d,%d) at bfile %"PRId64", cfile %"PRId64", length %u\n", bmin, bmax, (io_procs->ftell(bfile) - sizeof(ss->b_this)), (int64_t)pos, left); } } pw->ptr = q; ss->left = left; return status; } /* Stream template */ static const stream_template s_band_read_template = { &st_stream_state, s_band_read_init, s_band_read_process, 1, cbuf_size }; #ifdef DEBUG static int buffer_segment_index(const stream_band_read_state *ss, uint buffer_offset, uint *poffset0) { uint i, offset0, offset = 0; for (i = 0; i < ss->offset_map_length; i++) { offset0 = offset; offset += ss->offset_map[i].buffered; if (buffer_offset < offset) { *poffset0 = offset0; return i; } } (void)gs_note_error(gs_error_unregistered); /* Must not happen. */ return -1; } int64_t clist_file_offset(const stream_state * st, uint buffer_offset) { const stream_band_read_state *ss = (const stream_band_read_state *) st; uint offset0; int i = buffer_segment_index(ss, buffer_offset, &offset0); if (i < 0) return -1; return ss->offset_map[i].file_offset + (uint)(buffer_offset - offset0); } int top_up_offset_map(stream_state * st, const byte *buf, const byte *ptr, const byte *end) { /* NOTE: The clist data are buffered in the clist reader buffer and in the internal buffer of the clist stream. Since the 1st buffer is not accessible from s_band_read_process, offset_map corresponds the union of the 2 buffers. */ stream_band_read_state *const ss = (stream_band_read_state *) st; if (!gs_debug_c('L')) { return 0; } else if (ss->skip_first) { /* Work around the trick with initializing the buffer pointer with the buffer end. */ ss->skip_first = false; return 0; } else if (ptr == buf) return 0; else { uint buffer_offset = ptr - buf; uint offset0, consumed; int i = buffer_segment_index(ss, buffer_offset, &offset0); if (i < 0) return_error(gs_error_unregistered); /* Must not happen. */ consumed = buffer_offset - offset0; ss->offset_map[i].buffered -= consumed; ss->offset_map[i].file_offset += consumed; if (i) { memmove(ss->offset_map, ss->offset_map + i, (ss->offset_map_length - i) * sizeof(*ss->offset_map)); ss->offset_map_length -= i; } } return 0; } #endif /* DEBUG */ /* ------ Reading/rendering ------ */ /* Calculate the raster for a chunky or planar device. */ static int clist_plane_raster(const gx_device *dev, const gx_render_plane_t *render_plane) { return gx_device_raster_plane(dev, render_plane); } /* Select full-pixel rendering if required for RasterOp. */ void clist_select_render_plane(gx_device *dev, int y, int height, gx_render_plane_t *render_plane, int index) { if (index >= 0) { gx_color_usage_t color_usage; int ignore_start; gdev_prn_color_usage(dev, y, height, &color_usage, &ignore_start); if (color_usage.slow_rop) index = -1; } if (index < 0) render_plane->index = index; else gx_render_plane_init(render_plane, dev, index); } /* * Do device setup from params stored in command list. This is only for * async rendering & assumes that the first command in every command list * is a put_params command which sets all space-related parameters to the * value they will have for the duration of that command list. */ int clist_setup_params(gx_device *dev) { gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_reader * const crdev = &cldev->reader; int code = clist_render_init(cldev); if (code < 0) return code; code = clist_playback_file_bands(playback_action_setup, crdev, &crdev->page_info, 0, 0, 0, 0, 0); /* put_params may have reinitialized device into a writer */ clist_render_init(cldev); return code; } int clist_close_writer_and_init_reader(gx_device_clist *cldev) { gx_device_clist_reader * const crdev = &cldev->reader; gs_memory_t *base_mem = crdev->memory->thread_safe_memory; gs_memory_status_t mem_status; int code = 0; /* Initialize for rendering if we haven't done so yet. */ if (crdev->ymin < 0) { code = clist_end_page(&cldev->writer); if (code < 0) return code; code = clist_render_init(cldev); if (code < 0) return code; /* allocate and load the color_usage_array */ code = clist_read_color_usage_array(crdev); if (code < 0) return code; /* Check for and get ICC profile table */ code = clist_read_icctable(crdev); if (code < 0) return code; /* Allocate the icc cache for the clist reader */ /* Since we may be rendering in multiple threads, make sure the memory */ /* is thread safe by using a known thread_safe memory allocator */ gs_memory_status(base_mem, &mem_status); if (mem_status.is_thread_safe == false) { return_error(gs_error_VMerror); } if (crdev->icc_cache_cl == NULL) { code = (crdev->icc_cache_cl = gsicc_cache_new(base_mem)) == NULL ? gs_error_VMerror : code; } } check_device_compatible_encoding((gx_device *)cldev); return code; } /* Used to find the command block information in the bfile that is related to extra information stored in a psuedo band. Currently application of this is storage of the ICC profile table, the per-band color_usage array, and the spot equivalent colors when doing overprint simulation. We may eventually use this for storing other information like compressed images. */ static int clist_find_pseudoband(gx_device_clist_reader *crdev, int band, cmd_block *cb) { gx_band_page_info_t *page_info = &(crdev->page_info); clist_file_ptr bfile = page_info->bfile; int64_t save_pos = page_info->bfile_end_pos; int64_t start_pos; int code; if (bfile == NULL) { /* files haven't been opened yet. Do it now */ char fmode[4]; strcpy(fmode, "r"); strncat(fmode, gp_fmode_binary_suffix, 1); if ((code=page_info->io_procs->fopen(page_info->cfname, fmode, &page_info->cfile, crdev->memory, crdev->memory, true)) < 0 || (code=page_info->io_procs->fopen(page_info->bfname, fmode, &page_info->bfile, crdev->memory, crdev->memory, false)) < 0) { return code; } bfile = page_info->bfile; } /* Go to the start of the last command block */ start_pos = page_info->bfile_end_pos - sizeof(cmd_block); page_info->io_procs->fseek(bfile, start_pos, SEEK_SET, page_info->bfname); while( 1 ) { int read = page_info->io_procs->fread_chars(cb, sizeof(cmd_block), bfile); if (read < sizeof(cmd_block)) return -1; if (cb->band_max == band && cb->band_min == band) { page_info->io_procs->fseek(bfile, save_pos, SEEK_SET, page_info->bfname); return(0); /* Found it */ } start_pos -= sizeof(cmd_block); if (start_pos < 0) { page_info->io_procs->fseek(bfile, save_pos, SEEK_SET, page_info->bfname); return(-1); /* Did not find it before getting into other stuff in normal bands */ } page_info->io_procs->fseek(bfile, start_pos, SEEK_SET, page_info->bfname); } } /* A procedure to read a chunk of data from the cfile at a particular location into buff */ int clist_read_chunk(gx_device_clist_reader *crdev, int64_t position, int size, unsigned char *buf) { clist_file_ptr cfile = crdev->page_info.cfile; int64_t save_pos; /* Save our current location */ save_pos = crdev->page_info.io_procs->ftell(cfile); /* Go to our new position */ crdev->page_info.io_procs->fseek(cfile, position, SEEK_SET, crdev->page_info.cfname); /* Get the data */ crdev->page_info.io_procs->fread_chars(buf, size, cfile); /* Restore our position */ crdev->page_info.io_procs->fseek(cfile, save_pos, SEEK_SET, crdev->page_info.cfname); return 0; } /* read the color_usage_array back from the pseudo band */ int clist_read_color_usage_array(gx_device_clist_reader *crdev) { int code, size_data = crdev->nbands * sizeof(gx_color_usage_t ); cmd_block cb; if (crdev->color_usage_array != NULL) gs_free_object(crdev->memory, crdev->color_usage_array, "clist reader color_usage_array"); crdev->color_usage_array = (gx_color_usage_t *)gs_alloc_bytes(crdev->memory, size_data, "clist reader color_usage_array"); if (crdev->color_usage_array == NULL) return_error(gs_error_VMerror); code = clist_find_pseudoband(crdev, crdev->nbands + COLOR_USAGE_OFFSET - 1, &cb); if (code < 0) return code; code = clist_read_chunk(crdev, cb.pos, size_data, (unsigned char *)crdev->color_usage_array); return code; } /* read the cmyk equivalent spot colors */ int clist_read_op_equiv_cmyk_colors(gx_device_clist_reader *crdev, equivalent_cmyk_color_params *op_equiv_cmyk_colors) { int code; cmd_block cb; code = clist_find_pseudoband(crdev, crdev->nbands + SPOT_EQUIV_COLORS - 1, &cb); if (code < 0) return code; code = clist_read_chunk(crdev, cb.pos, sizeof(equivalent_cmyk_color_params), (unsigned char *)op_equiv_cmyk_colors); return code; } /* Unserialize the icc table information stored in the cfile and place it in the reader device */ static int clist_unserialize_icctable(gx_device_clist_reader *crdev, cmd_block *cb) { clist_file_ptr cfile = crdev->page_info.cfile; clist_icctable_t *icc_table = crdev->icc_table; int64_t save_pos; int number_entries, size_data; unsigned char *buf, *buf_start; clist_icctable_entry_t *curr_entry; int k; gs_memory_t *stable_mem = crdev->memory->stable_memory; if ( icc_table != NULL ) return(0); save_pos = crdev->page_info.io_procs->ftell(cfile); crdev->page_info.io_procs->fseek(cfile, cb->pos, SEEK_SET, crdev->page_info.cfname); /* First four bytes tell us the number of entries. */ crdev->page_info.io_procs->fread_chars(&number_entries, sizeof(number_entries), cfile); /* Allocate the space */ size_data = number_entries*sizeof(clist_icc_serial_entry_t); buf = gs_alloc_bytes(crdev->memory, size_data, "clist_read_icctable"); buf_start = buf; if (buf == NULL) return gs_rethrow(-1, "insufficient memory for icc table buffer reader"); /* Get the data */ clist_read_chunk(crdev, cb->pos + 4, size_data, buf); icc_table = gs_alloc_struct(stable_mem, clist_icctable_t, &st_clist_icctable, "clist_read_icctable"); if (icc_table == NULL) { gs_free_object(stable_mem, buf_start, "clist_read_icctable"); return gs_rethrow(-1, "insufficient memory for icc table buffer reader"); } icc_table->memory = stable_mem; icc_table->head = NULL; icc_table->final = NULL; /* Allocate and fill each entry */ icc_table->tablesize = number_entries; crdev->icc_table = icc_table; for (k = 0; k < number_entries; k++) { curr_entry = gs_alloc_struct(stable_mem, clist_icctable_entry_t, &st_clist_icctable_entry, "clist_read_icctable"); if (curr_entry == NULL) { gs_free_object(stable_mem, buf_start, "clist_read_icctable"); return gs_rethrow(-1, "insufficient memory for icc table entry"); } memcpy(&(curr_entry->serial_data), buf, sizeof(clist_icc_serial_entry_t)); buf += sizeof(clist_icc_serial_entry_t); curr_entry->icc_profile = NULL; if ( icc_table->head == NULL ) { icc_table->head = curr_entry; icc_table->final = curr_entry; } else { icc_table->final->next = curr_entry; icc_table->final = curr_entry; } curr_entry->next = NULL; } gs_free_object(crdev->memory, buf_start, "clist_read_icctable"); crdev->page_info.io_procs->fseek(cfile, save_pos, SEEK_SET, crdev->page_info.cfname); return 0; } /* Get the ICC profile table information from the clist */ int clist_read_icctable(gx_device_clist_reader *crdev) { /* Look for the command block of the ICC Profile. */ cmd_block cb; int code; /* First get the command block which will tell us where the information is stored in the cfile */ code = clist_find_pseudoband(crdev, crdev->nbands + ICC_TABLE_OFFSET - 1, &cb); if (code < 0) return(0); /* No ICC information */ /* Unserialize the icc_table from the cfile */ code = clist_unserialize_icctable(crdev, &cb); return(code); } /* Initialize for reading. */ int clist_render_init(gx_device_clist *dev) { gx_device_clist_reader * const crdev = &dev->reader; crdev->ymin = crdev->ymax = 0; crdev->yplane.index = -1; /* For normal rasterizing, pages and num_pages is 1. */ crdev->pages = 0; crdev->num_pages = 1; /* always at least one page */ crdev->offset_map = NULL; crdev->icc_table = NULL; crdev->color_usage_array = NULL; crdev->render_threads = NULL; return 0; } /* Copy a rasterized rectangle to the client, rasterizing if needed. */ int clist_get_bits_rectangle(gx_device *dev, const gs_int_rect * prect, gs_get_bits_params_t *params, gs_int_rect **unread) { gx_device_clist *cldev = (gx_device_clist *)dev; gx_device_clist_reader *crdev = &cldev->reader; gx_device_clist_common *cdev = (gx_device_clist_common *)dev; gs_get_bits_options_t options = params->options; int y = prect->p.y; int end_y = prect->q.y; int line_count = end_y - y; gs_int_rect band_rect; int lines_rasterized; gx_device *bdev; uint num_planes = (options & GB_PACKING_CHUNKY ? 1 : options & GB_PACKING_PLANAR ? dev->color_info.num_components : options & GB_PACKING_BIT_PLANAR ? dev->color_info.depth : 0 /****** NOT POSSIBLE ******/); gx_render_plane_t render_plane; int plane_index; int my; int code; if (prect->p.x < 0 || prect->q.x > dev->width || y < 0 || end_y > dev->height ) return_error(gs_error_rangecheck); if (line_count <= 0 || prect->p.x >= prect->q.x) return 0; /* * Calculate the render_plane from the params. There are two cases: * full pixels, or a single plane. */ plane_index = -1; if (options & GB_SELECT_PLANES) { /* Look for the one selected plane. */ int i; for (i = 0; i < num_planes; ++i) if (params->data[i]) { if (plane_index >= 0) /* >1 plane requested */ return gx_default_get_bits_rectangle(dev, prect, params, unread); plane_index = i; } } if (0 > (code = clist_close_writer_and_init_reader(cldev))) return code; clist_select_render_plane(dev, y, line_count, &render_plane, plane_index); code = gdev_create_buf_device(cdev->buf_procs.create_buf_device, &bdev, cdev->target, y, &render_plane, dev->memory, &(crdev->color_usage_array[y/crdev->page_band_height])); if (code < 0) return code; code = clist_rasterize_lines(dev, y, line_count, bdev, &render_plane, &my); if (code >= 0) { lines_rasterized = min(code, line_count); /* Return as much of the rectangle as falls within the rasterized lines. */ band_rect = *prect; band_rect.p.y = my; band_rect.q.y = my + lines_rasterized; code = dev_proc(bdev, get_bits_rectangle) (bdev, &band_rect, params, unread); } cdev->buf_procs.destroy_buf_device(bdev); if (code < 0 || lines_rasterized == line_count) return code; /* * We'll have to return the rectangle in pieces. Force GB_RETURN_COPY * rather than GB_RETURN_POINTER, and require all subsequent pieces to * use the same values as the first piece for all of the other format * options. If copying isn't allowed, or if there are any unread * rectangles, punt. */ if (!(options & GB_RETURN_COPY) || code > 0) return gx_default_get_bits_rectangle(dev, prect, params, unread); options = params->options; if (!(options & GB_RETURN_COPY)) { /* Redo the first piece with copying. */ params->options = options = (params->options & ~GB_RETURN_ALL) | GB_RETURN_COPY; lines_rasterized = 0; } { gs_get_bits_params_t band_params; uint raster = gx_device_raster(bdev, true); code = gdev_create_buf_device(cdev->buf_procs.create_buf_device, &bdev, cdev->target, y, &render_plane, dev->memory, &(crdev->color_usage_array[y/crdev->page_band_height])); if (code < 0) return code; band_params = *params; while ((y += lines_rasterized) < end_y) { int i; /* Increment data pointers by lines_rasterized. */ for (i = 0; i < num_planes; ++i) if (band_params.data[i]) band_params.data[i] += raster * lines_rasterized; line_count = end_y - y; code = clist_rasterize_lines(dev, y, line_count, bdev, &render_plane, &my); if (code < 0) break; lines_rasterized = min(code, line_count); band_rect.p.y = my; band_rect.q.y = my + lines_rasterized; code = dev_proc(bdev, get_bits_rectangle) (bdev, &band_rect, &band_params, unread); if (code < 0) break; params->options = options = band_params.options; if (lines_rasterized == line_count) break; } cdev->buf_procs.destroy_buf_device(bdev); } return code; } /* Copy scan lines to the client. This is where rendering gets done. */ /* Processes min(requested # lines, # lines available thru end of band) */ int /* returns -ve error code, or # scan lines copied */ clist_rasterize_lines(gx_device *dev, int y, int line_count, gx_device *bdev, const gx_render_plane_t *render_plane, int *pmy) { gx_device_clist * const cldev = (gx_device_clist *)dev; gx_device_clist_reader * const crdev = &cldev->reader; gx_device *target = crdev->target; uint raster = clist_plane_raster(target, render_plane); byte *mdata = crdev->data + crdev->page_tile_cache_size; byte *mlines = (crdev->page_line_ptrs_offset == 0 ? NULL : mdata + crdev->page_line_ptrs_offset); int plane_index = (render_plane ? render_plane->index : -1); int code; /* Render a band if necessary, and copy it incrementally. */ if (crdev->ymin < 0 || crdev->yplane.index != plane_index || !(y >= crdev->ymin && y < crdev->ymax) ) { int band_height = crdev->page_band_height; int band = y / band_height; int band_begin_line = band * band_height; int band_end_line = band_begin_line + band_height; int band_num_lines; gs_int_rect band_rect; if (band_end_line > dev->height) band_end_line = dev->height; /* Clip line_count to current band */ if (line_count > band_end_line - y) line_count = band_end_line - y; band_num_lines = band_end_line - band_begin_line; if (y < 0 || y > dev->height) return_error(gs_error_rangecheck); code = crdev->buf_procs.setup_buf_device (bdev, mdata, raster, (byte **)mlines, 0, band_num_lines, band_num_lines); band_rect.p.x = 0; band_rect.p.y = band_begin_line; band_rect.q.x = dev->width; band_rect.q.y = band_end_line; if (code >= 0) code = clist_render_rectangle(cldev, &band_rect, bdev, render_plane, true); /* Reset the band boundaries now, so that we don't get */ /* an infinite loop. */ crdev->ymin = band_begin_line; crdev->ymax = band_end_line; crdev->offset_map = NULL; if (code < 0) return code; } if (line_count > crdev->ymax - y) line_count = crdev->ymax - y; code = crdev->buf_procs.setup_buf_device (bdev, mdata, raster, (byte **)mlines, y - crdev->ymin, line_count, crdev->ymax - crdev->ymin); if (code < 0) return code; *pmy = 0; return line_count; } /* * Render a rectangle to a client-supplied device. There is no necessary * relationship between band boundaries and the region being rendered. */ int clist_render_rectangle(gx_device_clist *cldev, const gs_int_rect *prect, gx_device *bdev, const gx_render_plane_t *render_plane, bool clear) { gx_device_clist_reader * const crdev = &cldev->reader; const gx_placed_page *ppages; int num_pages = crdev->num_pages; int band_height = crdev->page_band_height; int band_first = prect->p.y / band_height; int band_last = (prect->q.y - 1) / band_height; gx_band_page_info_t *pinfo; gx_band_page_info_t page_info; int code = 0; int i; bool save_pageneutralcolor; if (render_plane) crdev->yplane = *render_plane; else crdev->yplane.index = -1; if_debug2m('l', bdev->memory, "[l]rendering bands (%d,%d)\n", band_first, band_last); ppages = crdev->pages; /* Before playing back the clist, make sure that the gray detection is disabled */ /* so we don't slow down the rendering (primarily high level images). */ save_pageneutralcolor = crdev->icc_struct->pageneutralcolor; crdev->icc_struct->pageneutralcolor = false; for (i = 0; i < num_pages && code >= 0; ++i) { bool pdf14_needed = false; int band; if (ppages == NULL) { /* * If we aren't rendering saved pages, do the current one. * Note that this is the only case in which we may encounter * a gx_saved_page with non-zero cfile or bfile. */ bdev->band_offset_x = 0; bdev->band_offset_y = band_first * (long)band_height; pinfo = &(crdev->page_info); } else { const gx_placed_page *ppage = &ppages[i]; /* Store the page information. */ page_info.cfile = page_info.bfile = NULL; strncpy(page_info.cfname, ppage->page->cfname, sizeof(page_info.cfname)-1); strncpy(page_info.bfname, ppage->page->bfname, sizeof(page_info.bfname)-1); page_info.io_procs = ppage->page->io_procs; page_info.tile_cache_size = ppage->page->tile_cache_size; page_info.bfile_end_pos = ppage->page->bfile_end_pos; page_info.band_params = ppage->page->band_params; pinfo = &page_info; /* * Set the band_offset_? values in case the buffer device * needs this. Example, a device may need to adjust the * phase of the dithering based on the page position, NOT * the position within the band buffer to avoid band stitch * lines in the dither pattern. The old wtsimdi device did this * * The band_offset_x is not important for placed pages that * are nested on a 'master' page (imposition) since each * page expects to be dithered independently, but setting * this allows pages to be contiguous without a dithering * shift. * * The following sets the band_offset_? relative to the * master page. */ bdev->band_offset_x = ppage->offset.x; bdev->band_offset_y = ppage->offset.y + (band_first * band_height); } /* if any of the requested bands need transparency, use it for all of them */ /* The pdf14_ok_to_optimize checks if the target device (bdev) is compatible */ /* with the pdf14 compositor info that was written to the clist: colorspace, */ /* colorspace, etc. */ pdf14_needed = !pdf14_ok_to_optimize(bdev); for (band=band_first; !pdf14_needed && band <= band_last; band++) pdf14_needed |= (crdev->color_usage_array[band].trans_bbox.p.y <= crdev->color_usage_array[band].trans_bbox.q.y) ? true : false; code = clist_playback_file_bands(pdf14_needed ? playback_action_render : playback_action_render_no_pdf14, crdev, pinfo, bdev, band_first, band_last, prect->p.x - bdev->band_offset_x, prect->p.y); } crdev->icc_struct->pageneutralcolor = save_pageneutralcolor; /* restore it */ return code; } /* Playback the band file, taking the indicated action w/ its contents. */ int clist_playback_file_bands(clist_playback_action action, gx_device_clist_reader *crdev, gx_band_page_info_t *page_info, gx_device *target, int band_first, int band_last, int x0, int y0) { int code = 0; bool opened_bfile = false; bool opened_cfile = false; /* We have to pick some allocator for rendering.... */ gs_memory_t *mem =crdev->memory; stream_band_read_state rs; /* setup stream */ s_init_state((stream_state *)&rs, &s_band_read_template, (gs_memory_t *)0); /* Not mem, as we don't want to free rs */ rs.band_first = band_first; rs.band_last = band_last; rs.page_info = *page_info; rs.local_memory = mem; /* If this is a saved page, open the files. */ if (rs.page_cfile == 0) { code = crdev->page_info.io_procs->fopen(rs.page_cfname, gp_fmode_rb, &rs.page_cfile, crdev->bandlist_memory, crdev->bandlist_memory, true); opened_cfile = (code >= 0); } if (rs.page_bfile == 0 && code >= 0) { code = crdev->page_info.io_procs->fopen(rs.page_bfname, gp_fmode_rb, &rs.page_bfile, crdev->bandlist_memory, crdev->bandlist_memory, false); opened_bfile = (code >= 0); } if (rs.page_cfile != 0 && rs.page_bfile != 0) { stream s; byte sbuf[cbuf_size]; static const stream_procs no_procs = { s_std_noavailable, s_std_noseek, s_std_read_reset, s_std_read_flush, s_std_close, s_band_read_process }; s_band_read_init((stream_state *)&rs); # ifdef DEBUG s_band_read_init_offset_map(crdev, (stream_state *)&rs); # endif /* The stream doesn't need a memory, but we'll need to access s.memory->gs_lib_ctx. */ s_init(&s, mem); s_std_init(&s, sbuf, cbuf_size, &no_procs, s_mode_read); s.foreign = 1; s.state = (stream_state *)&rs; code = clist_playback_band(action, crdev, &s, target, x0, y0, mem); # ifdef DEBUG s_band_read_dnit_offset_map(crdev, (stream_state *)&rs); # endif } /* Close the files if we just opened them. */ if (opened_bfile && rs.page_bfile != 0) crdev->page_info.io_procs->fclose(rs.page_bfile, rs.page_bfname, false); if (opened_cfile && rs.page_cfile != 0) crdev->page_info.io_procs->fclose(rs.page_cfile, rs.page_cfname, false); return code; }