\input texinfo @c -*- Texinfo -*- @comment $Id: gdbm.texinfo,v 1.34 2013/12/25 09:31:59 gray Exp $ @comment %**start of header (This is for running Texinfo on a region.) @setfilename gdbm.info @include version.texi @settitle GDBM manual @ifinfo @dircategory Programming & development tools @direntry * GDBM: (gdbm). The GNU database manager. * gdbm_dump: gdbm_dump(gdbm). Dump the GDBM database into a flat file. * gdbm_load: gdbm_load(gdbm). Load the database from a flat file. @end direntry @end ifinfo @c @setchapternewpage odd @comment %**end of header (This is for running Texinfo on a region.) @c Use @kwindex for keywords @defcodeindex kw @syncodeindex kw cp @c Use @flindex for files @defcodeindex fl @syncodeindex fl cp @c Use @prindex for programs @defcodeindex pr @syncodeindex pr cp @c Merge all indices into a single one @syncodeindex fn cp @syncodeindex vr cp @syncodeindex ky cp @syncodeindex pg cp @syncodeindex tp cp @iftex @finalout @end iftex @copying Published by the Free Software Foundation, 51 Franklin Street, Fifth Floor Boston, MA 02110-1301, USA Copyright @copyright{} 1989-1999, 2007-2011 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover, and no Back-Cover texts. A copy of the license is included in the section entitled ``GNU Free Documentation License.'' @end copying @titlepage @sp 6 @center @titlefont{GNU dbm} @sp 2 @center A Database Manager @sp 2 @center by Philip A. Nelson, Jason Downs and Sergey Poznyakoff @sp 4 @center Manual by Pierre Gaumond, Philip A. Nelson, Jason Downs @center and Sergey Poznyakoff @sp 1 @center Edition @value{EDITION} @sp 1 @center for GNU @code{dbm}, Version @value{VERSION} @page @vskip 0pt plus 1filll @insertcopying @end titlepage @ifnothtml @page @summarycontents @page @end ifnothtml @contents @ifnottex @node Top @top The GNU database manager. GNU @code{dbm} is a library of functions implementing a hashed database on a disk file. This manual documents GNU @code{dbm} Version @value{VERSION} (@code{gdbm}). The software was originally written by Philip A.@: Nelson. This document was originally written by Pierre Gaumond from texts written by Phil. @end ifnottex @menu Introduction: * Copying:: Your rights. * Intro:: Introduction to GNU dbm. * List:: List of functions. Functions: * Open:: Opening the database. * Close:: Closing the database. * Count:: Counting records in the database. * Store:: Inserting and replacing records in the database. * Fetch:: Searching records in the database. * Delete:: Removing records from the database. * Sequential:: Sequential access to records. * Reorganization:: Database reorganization. * Sync:: Insure all writes to disk have competed. * Flat files:: Export and import to Flat file format. * Errors:: Convert internal error codes into English. * Options:: Setting internal options. * Locking:: File locking. * Error codes:: Error codes returned by @code{gdbm} calls. * Variables:: Two useful variables. * Compatibility:: Compatibility with UNIX dbm and ndbm. Programs * gdbmtool:: Examine and modify a GDBM database. * gdbm_dump:: Dump the database into a flat file. * gdbm_load:: Load the database from a flat file. * gdbmexport:: Export a database into a portable format. * Exit codes:: Exit codes returned by GDBM utilities. Other topics: * Bugs:: Problems and bugs. * Resources:: Additional resources, * GNU Free Documentation License:: Document license. * Index:: Index @end menu @node Copying @chapter Copying Conditions. This library is @dfn{free}; this means that everyone is free to use it and free to redistribute it on a free basis. GNU @code{dbm} (@code{gdbm}) is not in the public domain; it is copyrighted and there are restrictions on its distribution, but these restrictions are designed to permit everything that a good cooperating citizen would want to do. What is not allowed is to try to prevent others from further sharing any version of @code{gdbm} that they might get from you.@refill Specifically, we want to make sure that you have the right to give away copies @code{gdbm}, that you receive source code or else can get it if you want it, that you can change these functions or use pieces of them in new free programs, and that you know you can do these things.@refill To make sure that everyone has such rights, we have to forbid you to deprive anyone else of these rights. For example, if you distribute copies @code{gdbm}, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights.@refill Also, for our own protection, we must make certain that everyone finds out that there is no warranty for anything in the @code{gdbm} distribution. If these functions are modified by someone else and passed on, we want their recipients to know that what they have is not what we distributed, so that any problems introduced by others will not reflect on our reputation.@refill @code{Gdbm} is currently distributed under the terms of the GNU General Public License, Version 3. (@emph{NOT} under the GNU General Library Public License.) A copy the GNU General Public License is included with the distribution of @code{gdbm}. @node Intro @chapter Introduction to GNU @code{dbm}. GNU @code{dbm} (@code{gdbm}) is a library of database functions that use extensible hashing and works similar to the standard UNIX @code{dbm} functions. These routines are provided to a programmer needing to create and manipulate a hashed database. (@code{gdbm} is @emph{NOT} a complete database package for an end user.) The basic use of @code{gdbm} is to store key/data pairs in a data file. Each key must be unique and each key is paired with only one data item. The keys can not be directly accessed in sorted order. The basic unit of data in @code{gdbm} is the structure: @example typedef struct @{ char *dptr; int dsize; @} datum; @end example This structure allows for arbitrary sized keys and data items. The key/data pairs are stored in a @code{gdbm} disk file, called a @code{gdbm} database. An application must open a @code{gdbm} database to be able manipulate the keys and data contained in the database. @code{gdbm} allows an application to have multiple databases open at the same time. When an application opens a @code{gdbm} database, it is designated as a @code{reader} or a @code{writer}. A @code{gdbm} database can be opened by at most one writer at a time. However, many readers may open the database simultaneously. Readers and writers can not open the @code{gdbm} database at the same time. @node List @chapter List of functions. The following is a quick list of the functions contained in the @code{gdbm} library. The include file @code{gdbm.h}, that can be included by the user, contains a definition of these functions. @example #include GDBM_FILE gdbm_open(name, block_size, flags, mode, fatal_func); void gdbm_close(dbf); int gdbm_store(dbf, key, content, flag); datum gdbm_fetch(dbf, key); int gdbm_delete(dbf, key); datum gdbm_firstkey(dbf); datum gdbm_nextkey(dbf, key); int gdbm_reorganize(dbf); void gdbm_sync(dbf); int gdbm_exists(dbf, key); char *gdbm_strerror(errno); int gdbm_setopt(dbf, option, value, size); int gdbm_fdesc(dbf); int gdbm_export (GDBM_FILE, const char *, int, int); int gdbm_export_to_file (GDBM_FILE dbf, FILE *fp); int gdbm_import (GDBM_FILE, const char *, int); int gdbm_import_from_file (GDBM_FILE dbf, FILE *fp, int flag); int gdbm_count (GDBM_FILE dbf, gdbm_count_t *pcount); int gdbm_version_cmp (int const a[], int const b[]); @end example The @code{gdbm.h} include file is often in the @file{/usr/local/include} directory. (The actual location of @code{gdbm.h} depends on your local installation of @code{gdbm}.) @node Open @chapter Opening the database. @cindex opening the database @cindex database, opening or creating @deftypefn {gdbm interface} GDBM_FILE gdbm_open (const char *@var{name}, int @var{block_size}, @ int @var{flags}, int @var{mode}, void (*fatal_func)(const char *)) Initializes @code{gdbm} system. If the file has a size of zero bytes, a file initialization procedure is performed, setting up the initial structure in the file. The arguments are: @table @var @item name The name of the file (the complete name, @code{gdbm} does not append any characters to this name). @item block_size It is used during initialization to determine the size of various constructs. It is the size of a single transfer from disk to memory. This parameter is ignored if the file has been previously initialized. The minimum size is 512. If the value is less than 512, the file system block size is used, otherwise the value of @var{block_size} is used. @item flags @kwindex GDBM_READER @kwindex GDBM_WRITER @kwindex GDBM_WRCREAT @kwindex GDBM_NEWDB If @code{flags} is set to @samp{GDBM_READER}, the user wants to just read the database and any call to @code{gdbm_store} or @code{gdbm_delete} will fail. Many readers can access the database at the same time. If @code{flags} is set to @samp{GDBM_WRITER}, the user wants both read and write access to the database and requires exclusive access. If @code{flags} is set to @samp{GDBM_WRCREAT}, the user wants both read and write access to the database and wants it created if it does not already exist. If @code{flags} is set to @samp{GDBM_NEWDB}, the user want a new database created, regardless of whether one existed, and wants read and write access to the new database. @kwindex GDBM_SYNC @kwindex GDBM_NOLOCK @kwindex GDBM_NOMMAP The following may also be logically or'd into the database flags: @samp{GDBM_SYNC}, which causes all database operations to be synchronized to the disk, @samp{GDBM_NOLOCK}, which prevents the library from performing any locking on the database file, and @samp{GDBM_NOMMAP}, which disables the memory mapping mechanism. The option @samp{GDBM_FAST} is now obsolete, since @code{gdbm} defaults to no-sync mode. @kwindex GDBM_CLOEXEC @cindex close-on-exec If the host @samp{open} call @ifhtml (@uref{http://www.manpagez.com/man/2/open, open(2)}) @end ifhtml @ifnothtml (@pxref{open,,,open(2),open(2) man page}) @end ifnothtml supports the @samp{O_CLOEXEC} flag, the @samp{GDBM_CLOEXEC} can be or'd into the flags, to enable the close-on-exec flag for the database file descriptor. @item mode File mode (see @ifhtml @uref{http://www.manpagez.com/man/2/chmod}, @end ifhtml @ifnothtml @ref{chmod,,change permissions of a file,chmod(2), chmod(2) man page}, @end ifnothtml and @ifhtml @uref{http://www.manpagez.com/man/2/open}), @end ifhtml @ifnothtml @pxref{open,,open a file,open(2), open(2) man page}), @end ifnothtml which is used if the file is created). @item fatal_func A function for @code{gdbm} to call if it detects a fatal error. The only parameter of this function is a string. If the value of @samp{NULL} is provided, @code{gdbm} will use a default function. @end table The return value, is the pointer needed by all other functions to access that @code{gdbm} file. If the return is the @samp{NULL} pointer, @code{gdbm_open} was not successful. The errors can be found in @code{gdbm_errno} variable (@pxref{Variables, gdbm_errno}). Available error codes are discussed in @ref{Error codes}. In all of the following calls, the parameter @var{dbf} refers to the pointer returned from @code{gdbm_open}. @end deftypefn @node Close @chapter Closing the database. @cindex closing database @cindex database, closing It is important that every file opened is also closed. This is needed to update the reader/writer count on the file: @deftypefn {gdbm interface} void gdbm_close (GDBM_FILE @var{dbf}) This function closes the @code{gdbm} file and frees all memory associated with it. The parameter is: @table @var @item dbf The pointer returned by @code{gdbm_open}. @end table @end deftypefn @node Count @chapter Number of Records @cindex number of records @deftypefn {gdbm interface} int gdbm_count (GDBM_FILE @var{dbf}, @ gdbm_count_t *@var{pcount}) Counts number of records in the database @var{dbf}. On success, stores it in the memory location pointed to by @var{pcount} and return 0. On error, sets @code{gdbm_errno} (if relevant, also @code{errno}) and returns -1. @end deftypefn @node Store @chapter Inserting and replacing records in the database. @cindex storing records @cindex records, storing @deftypefn {gdbm interface} int gdbm_store (GDBM_FILE @var{dbf}, datum @var{key}, @ datum @var{content}, int @var{flag}) The function @code{gdbm_store} inserts or replaces records in the database. The parameters are: @table @var @item dbf The pointer returned by @code{gdbm_open}. @item key The search key. @item content The data to be associated with the key. @item flag @kwindex GDBM_REPLACE @kwindex GDBM_INSERT Defines the action to take when the key is already in the database. The value @samp{GDBM_REPLACE} (defined in @file{gdbm.h}) asks that the old data be replaced by the new @var{content}. The value @samp{GDBM_INSERT} asks that an error be returned and no action taken if the @var{key} already exists. @end table This function can return the following values: @table @asis @item -1 The item was not stored in the database because the caller was not an official writer or either @var{key} or @var{content} have a @samp{NULL} @samp{dptr} field. Both @var{key} and @var{content} must have the @samp{dptr} field be a non-@samp{NULL} value. Since a @samp{NULL} @samp{dptr} field is used by other functions to indicate an error, it cannot be valid data. @item +1 The item was not stored because the argument @var{flag} was @samp{GDBM_INSERT} and the @var{key} was already in the database. @item 0 No error. The value of @var{content} is keyed by @var{key}. The file on disk is updated to reflect the structure of the new database before returning from this function. @end table @end deftypefn If you store data for a @var{key} that is already in the data base, @code{gdbm} replaces the old data with the new data if called with @samp{GDBM_REPLACE}. You do not get two data items for the same @code{key} and you do not get an error from @code{gdbm_store}. The size in @code{gdbm} is not restricted like @code{dbm} or @code{ndbm}. Your data can be as large as you want. @node Fetch @chapter Searching for records in the database. @cindex fetching records @cindex looking up records @cindex record, fetching @deftypefn {gdbm interface} datum gdbm_fetch (GDBM_FILE @var{dbf}, datum @var{key}) Looks up a given @var{key} and returns the information associated with it. The @samp{dptr} field in the structure that is returned points to a memory block allocated by @code{malloc}. It is the caller's responsibility to free it when no longer needed. If the @samp{dptr} is @samp{NULL}, no data was found. The parameters are: @table @var @item dbf The pointer returned by @code{gdbm_open}. @item key The search key. @end table @end deftypefn An example of using this function: @example content = gdbm_fetch (dbf, key); if (content.dptr == NULL) @{ fprintf(stderr, "key not found\n"); @} else @{ /* do something with content.dptr */ @} @end example @cindex records, testing existence You may also search for a particular key without retrieving it: @deftypefn {gdbm interface} int gdbm_exists (GDBM_FILE @var{dbf}, datum @var{key}) Returns @samp{true} (@samp{1}) if the @var{key} exists in @var{dbf} and @samp{false} (@samp{0}) otherwise. The parameters are: @table @var @item dbf The pointer returned by @code{gdbm_open}. @item key The search key. @end table @end deftypefn @node Delete @chapter Removing records from the database. @cindex deleting records @cindex record, deleting To remove some data from the database, use the @code{gdbm_delete} function. @deftypefn {gdbm interface} int gdbm_delete (GDBM_FILE @var{dbf}, datum @var{key}) Deletes the data associated with the given @var{key}, if it exists in the database @var{dbf}. The file on disk is updated to reflect the structure of the new database before returning from this function. The parameters are: @table @var @item dbf The pointer returned by @code{gdbm_open}. @item datum key The search key. @end table The function returns @samp{-1} if the item is not present or the requester is a reader. The return of @samp{0} marks a successful delete. @end deftypefn @node Sequential @chapter Sequential access to records. @cindex sequential access @cindex iterating over records @cindex records, iterating over The next two functions allow for accessing all items in the database. This access is not @code{key} sequential, but it is guaranteed to visit every @code{key} in the database once. The order has to do with the hash values. @code{gdbm_firstkey} starts the visit of all keys in the database. @code{gdbm_nextkey} finds and reads the next entry in the hash structure for @code{dbf}. @deftypefn {gdbm interface} datum gdbm_firstkey (GDBM_FILE @var{dbf}) Initiate sequential access to the database @var{dbf}. The returned value is the first key accessed in the database. If the @samp{dptr} field in the returned datum is @samp{NULL}, the database contains no data. Otherwise, @samp{dptr} points to a memory block obtained from @code{malloc}, which holds the key value. The caller is responsible for freeing this memory block when no longer needed. @end deftypefn @deftypefn {gdbm interface} datum gdbm_nextkey (GDBM_FILE @var{dbf}, datum @var{prev}) This function continues the iteration over the keys in @var{dbf}, initiated by @code{gdbm_firstkey}. The parameter @var{prev} holds the value returned from a previous call to @code{gdbm_nextkey} or @code{gdbm_firstkey}. The function returns next key from the database. If the @samp{dptr} field in the returned datum is @samp{NULL}, all keys in the database has been visited. Otherwise, @samp{dptr} points to a memory block obtained from @code{malloc}, which holds the key value. The caller is responsible for freeing this memory block when no longer needed. @end deftypefn @cindex iteration loop These functions were intended to visit the database in read-only algorithms, for instance, to validate the database or similar operations. The usual algorithm for sequential access is: @example @group key = gdbm_firstkey (dbf); while (key.dptr) @{ datum nextkey; /* do something with the key */ ... /* Obtain the next key */ nextkey = gdbm_nextkey (dbf, key); /* Reclaim the memory used by the key */ free (key.dptr); /* Use nextkey in the next iteration. */ key = nextkey; @} @end group @end example @cindex iteration and @code{gdbm_delete} @cindex deletion in iteration loops @cindex @code{gdbm_delete} and sequential access Care should be taken when the @code{gdbm_delete} function is used in such a loop. File visiting is based on a @dfn{hash table}. The @code{gdbm_delete} function re-arranges the hash table to make sure that any collisions in the table do not leave some item @dfn{un-findable}. The original key order is @emph{not} guaranteed to remain unchanged in all instances. So it is possible that some key will not be visited if a loop like the following is executed: @example @group key = gdbm_firstkey (dbf); while (key.dptr) @{ datum nextkey; if (some condition) @{ gdbm_delete (dbf, key); @} nextkey = gdbm_nextkey (dbf, key); free (key.dptr); key = nextkey; @} @end group @end example @node Reorganization @chapter Database reorganization. @cindex database reorganization @cindex reorganization, database The following function should be used very seldom. @deftypefn {gdbm interface} int gdbm_reorganize (GDBM_FILE @var{dbf}) Reorganizes the database. The parameter is: @table @var @item dbf The pointer returned by @code{gdbm_open}. @end table @end deftypefn If you have had a lot of deletions and would like to shrink the space used by the @code{gdbm} file, this function will reorganize the database. This results, in particular, in shortening the length of a @code{gdbm} file by removing the space occupied by deleted records. This reorganization requires creating a new file and inserting all the elements in the old file @var{dbf} into the new file. The new file is then renamed to the same name as the old file and @var{dbf} is updated to contain all the correct information about the new file. If an error is detected, the return value is negative. The value zero is returned after a successful reorganization. @node Sync @chapter Database Synchronization @cindex database synchronization @cindex synchronization, database @kwindex GDBM_SYNC Unless your database was opened with the @samp{GDBM_SYNC} flag, @code{gdbm} does not wait for writes to be flushed to the disk before continuing. This allows for faster writing of databases at the risk of having a corrupted database if the application terminates in an abnormal fashion. The following function allows the programmer to make sure the disk version of the database has been completely updated with all changes to the current time. @deftypefn {gdbm interface} void gdbm_sync (GDBM_FILE @var{dbf}) Synchronizes the changes in @var{dbf} with its disk file. The parameter is a pointer returned by @code{gdbm_open}. This function would usually be called after a complete set of changes have been made to the database and before some long waiting time. The @code{gdbm_close} function automatically calls the equivalent of @code{gdbm_sync} so no call is needed if the database is to be closed immediately after the set of changes have been made. @end deftypefn @node Flat files @chapter Export and Import @cindex Flat file format @cindex export @cindex import @code{Gdbm} databases can be converted into so-called @dfn{flat format} files. Such files cannot be used for searching, their sole purpose is to keep the data from the database for restoring it when the need arrives. There are two flat file formats, which differ in the way they represent the data and in the amount of meta-information stored. Both formats can be used, for example, to migrate between the different versions of @code{gdbm} databases. Generally speaking, flat files are safe to send over the network, and can be used to recreate the database on another machine. The recreated database is guaranteed to be a byte-to-byte equivalent of the database from which the flat file was created. This does not necessarily mean, however, that this file can be used in the same way as the original one. For example, if the original database contained non-@acronym{ASCII} data (e.g.@: @acronym{C} structures, integers etc.), the recreated database can be of any use only if the target machine has the same integer size and byte ordering as the source one and if its @acronym{C} compiler uses the same packing conventions as the one which generated @acronym{C} which populated the original database. In general, such binary databases are not portable between machines, unless you follow some stringent rules on what data is written to them and how it is interpreted. The GDBM version @value{VERSION} supports two flat file formats. The @dfn{binary} flat file format was first implemented in GDBM version 1.9.1. This format stores only key/data pairs, it does not keep information about the database file itself. As its name implies, files in this format are binary files. The @dfn{ascii} flat file format encodes all data in base64 and stores not only key/data pairs, but also the original database file metadata, such as file name, mode and ownership. Files in this format can be sent without additional encapsulation over transmission channels that normally allow only ASCII data, such as, e.g.@: SMTP. Due to additional metadata they allow for restoring an exact copy of the database, including file ownership and privileges, which is especially important if the database in question contained some security-related data. We call a process of creating a flat file from a database @dfn{exporting} or @dfn{dumping} this database. The reverse process, creating the database from a flat file is called @dfn{importing} or @dfn{loading} the database. @deftypefn {gdbm interface} int gdbm_dump (GDBM_FILE @var{dbf}, @ const char *@var{filename}, int @var{format}, @ int @var{open_flags}, int @var{mode}) Dumps the database file to the named file in requested format. Arguments are: @table @var @item dbf A pointer to the source database, returned by a prior call to @code{gdbm_open}. @item filename Name of the dump file. @item format Output file format. Allowed values are: @samp{GDBM_DUMP_FMT_BINARY} to create a binary dump and @samp{GDBM_DUMP_FMT_ASCII} to create an ASCII dump file. @item open_flags How to create the output file. If @var{flag} is @samp{GDBM_WRCREAT} the file will be created if it does not exist. If it does exist, the @code{gdbm_dump} will fail. If @var{flag} is @samp{GDBM_NEWDB}, the function will create a new output file, replacing it if it already exists. @item mode The permissions to use when creating the output file. See @ifhtml @uref{http://www.manpagez.com/man/2/open}, @end ifhtml @ifnothtml @ref{open,,open a file,open(2), open(2) man page}, @end ifnothtml for a detailed discussion. @end table @end deftypefn @anchor{gdbm_load function} @deftypefn {gdbm interface} int gdbm_load (GDBM_FILE *@var{pdbf}, @ const char *@var{filename}, int @var{flag}, @ int @var{meta_mask}, @ unsigned long *@var{errline}) Loads data from the dump file @var{filename} into the database pointed to by @var{pdbf}. The latter can point to @samp{NULL}, in which case the function will try to create a new database. If it succeeds, the function will return, in the memory location pointed to by @var{pdbf}, a pointer to the newly created database. If the dump file carries no information about the original database file name, the function will set @code{gdbm_errno} to @samp{GDBM_NO_DBNAME} and return @samp{-1}, indicating failure. The @var{flag} has the same meaning as the @var{flag} argument to the @code{gdbm_store} function (@pxref{Store}). The @var{meta_mask} argument can be used to disable restoring certain bits of file's meta-data from the information in the input dump file. It is a binary OR of zero or more of the following: @table @asis @item GDBM_META_MASK_MODE Do not restore file mode. @item GDBM_META_MASK_OWNER Do not restore file owner. @end table The function returns 0 upon successful completion or -1 on fatal errors and 1 on mild (non-fatal) errors. If a fatal error occurs, @code{gdbm_errno} will be set to one of the following values: @table @asis @item GDBM_FILE_OPEN_ERROR Input file (@var{filename}) cannot be opened. The @code{errno} variable can be used to get more detail about the failure. @item GDBM_MALLOC_ERROR Not enough memory to load data. @item GDBM_FILE_READ_ERROR Reading from @var{filename} failed. The @code{errno} variable can be used to get more detail about the failure. @item GDBM_ILLEGAL_DATA Input contained some illegal data. @item GDBM_ITEM_NOT_FOUND This error can occur only when the input file is in ASCII format. It indicates that the data part of the record about to be read lacked length specification. Application developers are advised to treat this error equally as @samp{GDBM_ILLEGAL_DATA}. @end table Mild errors mean that the function was able to successfully load and restore the data, but was unable to change database file metadata afterward. The table below lists possible values for @code{gdbm_errno} in this case. To get more detail, inspect the system @code{errno} variable. @table @asis @kwindex GDBM_ERR_FILE_OWNER @item GDBM_ERR_FILE_OWNER The function was unable to restore database file owner. @kwindex GDBM_ERR_FILE_MODE @item GDBM_ERR_FILE_MODE The function was unable to restore database file mode (permission bits). @end table If an error occurs while loading data from an input file in ASCII format, the number of line in which the error occurred will be stored in the location pointed to by the @var{errline} parameter, unless it is @samp{NULL}. If the line information is not available or applicable, @var{errline} will be set to @samp{0}. @end deftypefn @deftypefn {gdbm interface} int gdbm_dump_to_file (GDBM_FILE @var{dbf}, @ FILE *@var{fp}, int @var{format}) This is an alternative entry point to @code{gdbm_dump} (which see). Arguments are: @table @var @item dbf A pointer to the source database, returned by a call to @code{gdbm_open}. @item fp File to write the data to. @item format Format of the dump file. See the @var{format} argument to the @code{gdbm_dump} function. @end table @end deftypefn @deftypefn {gdbm interface} int gdbm_load_from_file (GDBM_FILE *@var{pdbf}, @ FILE *@var{fp}, int @var{replace}, int @var{meta_mask}, @ unsigned long *@var{line}) This is an alternative entry point to @code{gdbm_dump}. It writes the output to @var{fp} which must be a file open for writing. The rest of arguments is the same as for @code{gdbm_load} (excepting of course @var{flag}, which is not needed in this case). @end deftypefn @deftypefn {gdbm interface} int gdbm_export (GDBM_FILE @var{dbf}, @ const char *@var{exportfile}, int @var{flag}, int @var{mode}) This function is retained for compatibility with GDBM 1.10 and earlier. It dumps the database to a file in binary dump format and is entirely equivalent to @example gdbm_dump(@var{dbf}, @var{exportfile}, GDBM_DUMP_FMT_BINARY, @var{flag}, @var{mode}) @end example @end deftypefn @deftypefn {gdbm interface} int gdbm_export_to_file (GDBM_FILE @var{dbf}, FILE *@var{fp}) This is an alternative entry point to @code{gdbm_export}. This function writes to file @var{fp} a binary dump of the database @var{dbf}. @end deftypefn @deftypefn {gdbm interface} int gdbm_import (GDBM_FILE @var{dbf}, @ const char *@var{importfile}, int @var{flag}) This function is retained for compatibility with GDBM 1.10 and earlier. It loads the file @var{importfile}, which must be a binary flat file, into the database @var{dbf} and is equivalent to the following construct: @example @var{dbf} = gdbm_open (@var{importfile}, 0, @var{flag} == GDBM_REPLACE ? GDBM_WRCREAT : GDBM_NEWDB, 0600, NULL); gdbm_load (&@var{dbf}, @var{exportfile}, 0, @var{flag}, NULL) @end example @end deftypefn @deftypefn {gdbm interface} int gdbm_import_from_file (GDBM_FILE @var{dbf}, @ FILE *@var{fp}, int @var{flag}) An alternative entry point to @code{gdbm_import}. Reads the binary dump from the file @var{fp} and stores the key/value pairs to @var{dbf}. @xref{Store}, for a description of @var{flag}. This function is equivalent to: @example @var{dbf} = gdbm_open (@var{importfile}, 0, @var{flag} == GDBM_REPLACE ? GDBM_WRCREAT : GDBM_NEWDB, 0600, NULL); gdbm_load_from_file (@var{dbf}, @var{fp}, @var{flag}, 0, NULL); @end example @end deftypefn @node Errors @chapter Error strings. @cindex error strings To convert a @code{gdbm} error code into English text, use this routine: @deftypefn {gdbm interface} {const char *} gdbm_strerror (gdbm_error @var{errno}) Converts @var{errno} (which is an integer value) into a human-readable descriptive text. Returns a pointer to a static string. The caller must not alter or free the returned pointer. The @var{errno} argument is usually the value of the global variable @code{gdbm_errno}. @xref{Variables, gdbm_errno}. @end deftypefn @node Options @chapter Setting options @cindex database options @cindex options, database @code{Gdbm} supports the ability to set certain options on an already open database. @deftypefn {gdbm interface} int gdbm_setopt (GDBM_FILE @var{dbf}, int @var{option}, @ void *@var{value}, int @var{size}) Sets an option on the database or returns the value of an option. The parameters are: @table @var @item dbf The pointer returned by @code{gdbm_open}. @item option The option to be set or retrieved. @item value A pointer to the value to which @var{option} will be set or where to place the option value (depending on the option). @item size The length of the data pointed to by @var{value}. @end table @end deftypefn The valid options are: @table @asis @kwindex GDBM_CACHESIZE @kwindex GDBM_SETCACHESIZE @item GDBM_SETCACHESIZE @itemx GDBM_CACHESIZE Set the size of the internal bucket cache. This option may only be set once on each GDBM_FILE descriptor, and is set automatically to 100 upon the first access to the database. The @var{value} should point to a @code{size_t} holding the desired cache size. The @samp{GDBM_CACHESIZE} option is provided for compatibility with earlier versions. @kwindex GDBM_GETCACHESIZE @item GDBM_GETCACHESIZE Return the size of the internal bucket cache. The @var{value} should point to a @code{size_t} variable, where the size will be stored. @kwindex GDBM_GETFLAGS @item GDBM_GETFLAGS Return the flags describing the state of the database. The @var{value} should point to a @code{int} variable where to store the flags. The return is the same as the flags used when opening the database (@pxref{Open, gdbm_open}), except that it reflects the current state (which may have been altered by another calls to @code{gdbm_setopt}. @kwindex GDBM_FASTMODE @item GDBM_FASTMODE Enable or disable the @dfn{fast writes mode}, i.e.@: writes without subsequent synchronization. The @var{value} should point to an integer: @samp{TRUE} to enable fast mode, and @samp{FALSE} to disable it. This option is retained for compatibility with previous versions of @code{gdbm}. Its effect is the reverse of @code{GDBM_SETSYNCMODE} (see below). @kwindex GDBM_SETSYNCMODE @kwindex GDBM_SYNCMODE @item GDBM_SETSYNCMODE @itemx GDBM_SYNCMODE Turn on or off file system synchronization operations. This setting defaults to off. The @var{value} should point to an integer: @samp{TRUE} to turn synchronization on, and @samp{FALSE} to turn it off. Note, that this option is a reverse of @code{GDBM_FASTMODE}, i.e.@: calling @code{GDBM_SETSYNCMODE} with @samp{TRUE} has the same effect as calling @code{GDBM_FASTMODE} with @samp{FALSE}. The @samp{GDBM_SYNCMODE} option is provided for compatibility with earlier versions. @kwindex GDBM_GETSYNCMODE @item GDBM_GETSYNCMODE Return the current synchronization status. The @var{value} should point to an @code{int} where the status will be stored. @kwindex GDBM_SETCENTFREE @kwindex GDBM_CENTFREE @item GDBM_SETCENTFREE @itemx GDBM_CENTFREE @emph{NOTICE: This feature is still under study.} Set central free block pool to either on or off. The default is off, which is how previous versions of @code{gdbm} handled free blocks. If set, this option causes all subsequent free blocks to be placed in the @emph{global} pool, allowing (in theory) more file space to be reused more quickly. The @var{value} should point to an integer: @samp{TRUE} to turn central block pool on, and @samp{FALSE} to turn it off. The @samp{GDBM_CENTFREE} option is provided for compatibility with earlier versions. @kwindex GDBM_SETCOALESCEBLKS @kwindex GDBM_COALESCEBLKS @item GDBM_SETCOALESCEBLKS @itemx GDBM_COALESCEBLKS @emph{NOTICE: This feature is still under study.} Set free block merging to either on or off. The default is off, which is how previous versions of @code{gdbm} handled free blocks. If set, this option causes adjacent free blocks to be merged. This can become a @acronym{CPU} expensive process with time, though, especially if used in conjunction with GDBM_CENTFREE. The @var{value} should point to an integer: @samp{TRUE} to turn free block merging on, and @samp{FALSE} to turn it off. @kwindex GDBM_GETCOALESCEBLKS @item GDBM_GETCOALESCEBLKS Return the current status of free block merging. The @var{value} should point to an @code{int} where the status will be stored. @kwindex GDBM_SETMAXMAPSIZE @item GDBM_SETMAXMAPSIZE Sets maximum size of a memory mapped region. The @var{value} should point to a value of type @code{size_t}, @code{unsigned long} or @code{unsigned}. The actual value is rounded to the nearest page boundary (the page size is obtained from @code{sysconf(_SC_PAGESIZE)}). @kwindex GDBM_GETMAXMAPSIZE @item GDBM_GETMAXMAPSIZE Return the maximum size of a memory mapped region. The @var{value} should point to a value of type @code{size_t} where to return the data. @kwindex GDBM_SETMMAP @item GDBM_SETMMAP Enable or disable memory mapping mode. The @var{value} should point to an integer: @samp{TRUE} to enable memory mapping or @samp{FALSE} to disable it. @kwindex GDBM_GETMMAP @item GDBM_GETMMAP Check whether memory mapping is enabled. The @var{value} should point to an integer where to return the status. @kwindex GDBM_GETDBNAME @item GDBM_GETDBNAME Return the name of the database disk file. The @var{value} should point to a variable of type @code{char**}. A pointer to the newly allocated copy of the file name will be placed there. The caller is responsible for freeing this memory when no longer needed. For example: @example char *name; if (gdbm_setopt (dbf, GDBM_GETDBNAME, &name, sizeof (name))) @{ fprintf (stderr, "gdbm_setopt failed: %s\n", gdbm_strerror (gdbm_errno)); @} else @{ printf ("database name: %s\n", name); free (name); @} @end example @end table The return value will be @samp{-1} upon failure, or @samp{0} upon success. The global variable @code{gdbm_errno} will be set upon failure. For instance, to set a database to use a cache of 10, after opening it with @code{gdbm_open}, but prior to accessing it in any way, the following code could be used: @example @group int value = 10; ret = gdbm_setopt (dbf, GDBM_CACHESIZE, &value, sizeof (int)); @end group @end example @node Locking @chapter File Locking. @cindex locking @kwindex GDBM_NOLOCK With locking disabled (if @code{gdbm_open} was called with @samp{GDBM_NOLOCK}), the user may want to perform their own file locking on the database file in order to prevent multiple writers operating on the same file simultaneously. In order to support this, the @code{gdbm_fdesc} routine is provided. @deftypefn {gdbm interface} int gdbm_fdesc (GDBM_FILE @var{dbf}) Returns the file descriptor of the database @var{dbf}. This value can be used as an argument to @code{flock}, @code{lockf} or similar calls. @end deftypefn @node Variables @chapter Useful global variables. The following global variables and constants are available: @deftypevar gdbm_error gdbm_errno This variable contains error code from the last failed @code{gdbm} call. @xref{Error codes}, for a list of available error codes and their descriptions. Use @code{gdbm_strerror} (@pxref{Errors}) to convert it to a descriptive text. @end deftypevar @deftypevar {const char *} gdbm_errlist[] This variable is an array of error descriptions, which is used by @code{gdbm_strerror} to convert error codes to human-readable text (@pxref{Errors}). You can access it directly, if you wish so. It contains @code{_GDBM_MAX_ERRNO + 1} elements and can be directly indexed by the error code to obtain a corresponding descriptive text. @end deftypevar @defvr {Constant} _GDBM_MIN_ERRNO The minimum error code used by @code{gdbm}. @end defvr @defvr {Constant} _GDBM_MAX_ERRNO The maximum error code used by @code{gdbm}. @end defvr @cindex version number @deftypevar {const char *} gdbm_version A string containing the version information. @end deftypevar @deftypevar {int const} gdbm_version_number[3] This variable contains the @code{gdbm} version numbers: @multitable @columnfractions 0.4 0.5 @headitem Index @tab Meaning @item 0 @tab Major number @item 1 @tab Minor number @item 2 @tab Patchlevel number @end multitable Additionally, the following constants are defined in the @file{gdbm.h} file: @table @asis @kwindex GDBM_VERSION_MAJOR @item GDBM_VERSION_MAJOR Major number. @kwindex GDBM_VERSION_MINOR @item GDBM_VERSION_MINOR Minor number. @kwindex GDBM_VERSION_PATCH @item GDBM_VERSION_PATCH Patchlevel number. @end table These can be used to verify whether the header file matches the library. @end deftypevar To compare two split-out version numbers, use the following function: @deftypefn {gdbm interface} int gdbm_version_cmp (int const @var{a}[3], @ int const @var{b}[3]) Compare two version numbers. Return @samp{-1} if @var{a} is less than @var{b}, @samp{1} if @var{a} is greater than @var{b} and @samp{0} if they are equal. Comparison is done from left to right, so that: @example a = @{ 1, 8, 3 @}; b = @{ 1, 8, 3 @}; gdbm_version_cmp (a, b) @result{} 0 a = @{ 1, 8, 3 @}; b = @{ 1, 8, 2 @}; gdbm_version_cmp (a, b) @result{} 1 a = @{ 1, 8, 3 @}; b = @{ 1, 9. 0 @}; gdbm_version_cmp (a, b) @result{} -1 @end example @end deftypefn @node Error codes @chapter Error codes @cindex error codes This chapter summarizes error codes which can be set by the functions in @code{gdbm} library. @table @asis @kwindex GDBM_NO_ERROR @item GDBM_NO_ERROR No error occurred. @kwindex GDBM_MALLOC_ERROR @item GDBM_MALLOC_ERROR Memory allocation failed. Not enough memory. @kwindex GDBM_BLOCK_SIZE_ERROR @item GDBM_BLOCK_SIZE_ERROR This error is set by the @code{gdbm_open} function (@pxref{Open}), if the value of its @var{block_size} argument is incorrect. @kwindex GDBM_FILE_OPEN_ERROR @item GDBM_FILE_OPEN_ERROR The library was not able to open a disk file. This can be set by @code{gdbm_open} (@pxref{Open}), @code{gdbm_export} and @code{gdbm_import} functions (@pxref{Flat files}). Inspect the value of the system @code{errno} variable to get more detailed diagnostics. @kwindex GDBM_FILE_WRITE_ERROR @item GDBM_FILE_WRITE_ERROR Writing to a disk file failed. This can be set by @code{gdbm_open} (@pxref{Open}), @code{gdbm_export} and @code{gdbm_import} functions. Inspect the value of the system @code{errno} variable to get more detailed diagnostics. @kwindex GDBM_FILE_SEEK_ERROR @item GDBM_FILE_SEEK_ERROR Positioning in a disk file failed. This can be set by @code{gdbm_open} (@pxref{Open}) function. Inspect the value of the system @code{errno} variable to get a more detailed diagnostics. @kwindex GDBM_FILE_READ_ERROR @item GDBM_FILE_READ_ERROR Reading from a disk file failed. This can be set by @code{gdbm_open} (@pxref{Open}), @code{gdbm_export} and @code{gdbm_import} functions. Inspect the value of the system @code{errno} variable to get a more detailed diagnostics. @kwindex GDBM_BAD_MAGIC_NUMBER @item GDBM_BAD_MAGIC_NUMBER The file given as argument to @code{gdbm_open} function is not a valid @code{gdbm} file: it has a wrong magic number. @kwindex GDBM_EMPTY_DATABASE @item GDBM_EMPTY_DATABASE The file given as argument to @code{gdbm_open} function is not a valid @code{gdbm} file: it has zero length. @kwindex GDBM_CANT_BE_READER @item GDBM_CANT_BE_READER This error code is set by the @code{gdbm_open} function if it is not able to lock file when called in @samp{GDBM_READER} mode (@pxref{Open, GDBM_READER}). @kwindex GDBM_CANT_BE_WRITER @item GDBM_CANT_BE_WRITER This error code is set by the @code{gdbm_open} function if it is not able to lock file when called in writer mode (@pxref{Open}). @kwindex GDBM_READER_CANT_DELETE @item GDBM_READER_CANT_DELETE Set by the @code{gdbm_delete} (@pxref{Delete}) if it attempted to operate on a database that is open in read-only mode (@pxref{Open, GDBM_READER}). @kwindex GDBM_READER_CANT_STORE @item GDBM_READER_CANT_STORE Set by the @code{gdbm_store} (@pxref{Store}) if it attempted to operate on a database that is open in read-only mode (@pxref{Open, GDBM_READER}). @kwindex GDBM_READER_CANT_REORGANIZE @item GDBM_READER_CANT_REORGANIZE Set by the @code{gdbm_reorganize} (@pxref{Reorganization}) if it attempted to operate on a database that is open in read-only mode (@pxref{Open, GDBM_READER}). @kwindex GDBM_UNKNOWN_UPDATE @item GDBM_UNKNOWN_UPDATE Currently unused. Reserved for future uses. @kwindex GDBM_ITEM_NOT_FOUND @item GDBM_ITEM_NOT_FOUND Requested item was not found. This error is set by @code{gdbm_delete} (@pxref{Delete}) and @code{gdbm_fetch} (@pxref{Fetch}) when the requested @var{key} value is not found in the database. @kwindex GDBM_REORGANIZE_FAILED @item GDBM_REORGANIZE_FAILED The @code{gdbm_reorganize} function is not able to create a temporary database. @xref{Reorganization}. @kwindex GDBM_CANNOT_REPLACE @item GDBM_CANNOT_REPLACE Cannot replace existing item. This error is set by the @code{gdbm_store} if the requested @var{key} value is found in the database and the @var{flag} parameter is not @samp{GDBM_REPLACE}. @xref{Store}, for a detailed discussion. @kwindex GDBM_ILLEGAL_DATA @item GDBM_ILLEGAL_DATA Either @var{key} or @var{content} parameter was wrong in a call to to @code{gdbm_store} (@pxref{Store}). @kwindex GDBM_OPT_ALREADY_SET @item GDBM_OPT_ALREADY_SET Requested option can be set only once and was already set. This error is returned by the @code{gdbm_setopt} function. @xref{Options, GDBM_CACHESIZE}. @kwindex GDBM_OPT_ILLEGAL @item GDBM_OPT_ILLEGAL The @var{option} argument is not valid or the @var{value} argument points to an invalid value in a call to @code{gdbm_setopt} function. @xref{Options}. @kwindex GDBM_BYTE_SWAPPED @item GDBM_BYTE_SWAPPED The @code{gdbm_open} function (@pxref{Open}) attempts to open a database which is created on a machine with different byte ordering. @kwindex GDBM_BAD_FILE_OFFSET @item GDBM_BAD_FILE_OFFSET The @code{gdbm_open} function (@pxref{Open}) sets this error code if the file it tries to open has a wrong magic number. @kwindex GDBM_BAD_OPEN_FLAGS @item GDBM_BAD_OPEN_FLAGS Set by the @code{gdbm_export} function if supplied an invalid @var{flags} argument. @xref{Flat files}. @kwindex GDBM_FILE_STAT_ERROR @item GDBM_FILE_STAT_ERROR Getting information about a disk file failed. The system @code{errno} will give more details about the error. This error can be set by the following functions: @code{gdbm_open}, @code{gdbm_reorganize}. @kwindex GDBM_FILE_EOF @item GDBM_FILE_EOF End of file was encountered where more data was expected to be present. This error can occur when fetching data from the database and usually means that the database is truncated or otherwise corrupted. This error can be set by any GDBM function that does I/O. Some of these functions are: @code{gdbm_delete}, @code{gdbm_exists}, @code{gdbm_fetch}, @code{gdbm_export}, @code{gdbm_import}, @code{gdbm_reorganize}, @code{gdbm_firstkey}, @code{gdbm_nextkey}, @code{gdbm_store}. @kwindex GDBM_NO_DBNAME @item GDBM_NO_DBNAME Output database name is not specified. This error code is set by @code{gdbm_load} (@pxref{gdbm_load function,,gdbm_load}) if the first argument points to @samp{NULL} and the input file does not specify the database name. @kwindex GDBM_ERR_FILE_OWNER @item GDBM_ERR_FILE_OWNER This error code is set by @code{gdbm_load} if it is unable to restore database file owner. It is a mild error condition, meaning that the data have been restored successfully, only changing the target file owner failed. Inspect the system @code{errno} variable to get a more detailed diagnostics. @kwindex GDBM_ERR_FILE_MODE @item GDBM_ERR_FILE_MODE This error code is set by @code{gdbm_load} if it is unable to restore database file mode. It is a mild error condition, meaning that the data have been restored successfully, only changing the target file owner failed. Inspect the system @code{errno} variable to get a more detailed diagnostics. @end table @node Compatibility @chapter Compatibility with standard @code{dbm} and @code{ndbm}. @cindex compatibility layer @code{Gdbm} includes a compatibility layer, which provides traditional @samp{ndbm} and older @samp{dbm} functions. The layer is compiled and installed if the @option{--enable-libgdbm-compat} option is used when configuring the package. @findex ndbm.h @findex dbm.h @findex libgdbm_compat The compatibility layer consists of two header files: @file{ndbm.h} and @file{dbm.h} and the @file{libgdbm_compat} library. Older programs using @code{ndbm} or @code{dbm} interfaces can use @file{libgdbm_compat} without any changes. To link a program with the compatibility library, add the following two options to the @command{cc} invocation: @option{-lgdbm -lgdbm_compat}. The @option{-L} option may also be required, depending on where @code{gdbm} is installed, e.g.: @example cc ... -L/usr/local/lib -lgdbm -lgdbm_compat @end example @cindex @samp{dir} file @cindex @samp{pag} file Databases created and manipulated by the compatibility interfaces consist of two different files: @file{@var{file}.dir} and @file{@var{file}.pag}. This is required by the @acronym{POSIX} specification and corresponds to the traditional usage. Note, however, that despite the similarity of the naming convention, actual data stored in these files has not the same format as in the databases created by other @code{dbm} or @code{ndbm} libraries. In other words, you cannot access a standard UNIX @code{dbm} file with GNU @code{dbm}! GNU @code{dbm} files are not @code{sparse}. You can copy them with the usual @code{cp} command and they will not expand in the copying process. @menu * ndbm:: NDBM interface functions. * dbm:: DBM interface functions. @end menu @node ndbm @section NDBM interface functions. @cindex NDBM functions The functions below implement the @acronym{POSIX} @samp{ndbm} interface: @deftypefn {ndbm} {DBM *} dbm_open (char *@var{file}, int @var{flags}, int @var{mode}) Opens a database. The @var{file} argument is the full name of the database file to be opened. The function opens two files: @file{@var{file}.pag} and @file{@var{file}.dir}. The @var{flags} and @var{mode} arguments have the same meaning as the second and third arguments of @ifhtml @uref{http://www.manpagez.com/man/2/open,,open(2)}, @end ifhtml @ifnothtml @code{open} (@pxref{open,,open a file,open(2), open(2) man page}), @end ifnothtml except that a database opened for write-only access opens the files for read and write access and the behavior of the @code{O_APPEND} flag is unspecified. The function returns a pointer to the @code{DBM} structure describing the database. This pointer is used to refer to this database in all operations described below. Any error detected will cause a return value of @samp{NULL} and an appropriate value will be stored in @code{gdbm_errno} (@pxref{Variables}). @end deftypefn @deftypefn {ndbm} void dbm_close (DBM *@var{dbf}) Closes the database. The @var{dbf} argument must be a pointer returned by an earlier call to @code{dbm_open}. @end deftypefn @deftypefn {ndbm} datum dbm_fetch (DBM *@var{dbf}, datum @var{key}) Reads a record from the database with the matching key. The @var{key} argument supplies the key that is being looked for. If no matching record is found, the @code{dptr} member of the returned datum is @samp{NULL}. Otherwise, the @code{dptr} member of the returned datum points to the memory managed by the compatibility library. The application should never free it. @end deftypefn @deftypefn {ndbm} int dbm_store (DBM *@var{dbf}, datum @var{key}, @ datum @var{content}, int @var{mode}) Writes a key/value pair to the database. The argument @var{dbf} is a pointer to the @code{DBM} structure returned from a call to @code{dbm_open}. The @var{key} and @var{content} provide the values for the record key and content. The @var{mode} argument controls the behavior of @code{dbm_store} in case a matching record already exists in the database. It can have one of the following two values: @table @code @kwindex DBM_REPLACE @item DBM_REPLACE Replace existing record with the new one. @kwindex DBM_INSERT @item DBM_INSERT The existing record is left unchanged, and the function returns @samp{1}. @end table If no matching record exists in the database, new record will be inserted no matter what the value of the @var{mode} is. @end deftypefn @deftypefn {ndbm} int dbm_delete (DBM *@var{dbf}, datum @var{key}) Deletes the record with the matching key from the database. If the function succeeds, @samp{0} is returned. Otherwise, if no matching record is found or if an error occurs, @samp{-1} is returned. @end deftypefn @deftypefn {ndbm} datum dbm_firstkey (DBM *@var{dbf}) Initializes iteration over the keys from the database and returns the first key. Note, that the word @samp{first} does not imply any specific ordering of the keys. If there are no records in the database, the @code{dptr} member of the returned datum is @samp{NULL}. Otherwise, the @code{dptr} member of the returned datum points to the memory managed by the compatibility library. The application should never free it. @end deftypefn @deftypefn {ndbm} datum dbm_nextkey (DBM *@var{dbf}) Continues the iteration started by @code{dbm_firstkey}. Returns the next key in the database. If the iteration covered all keys in the database, the @code{dptr} member of the returned datum is @samp{NULL}. Otherwise, the @code{dptr} member of the returned datum points to the memory managed by the compatibility library. The application should never free it. @cindex sequential access, using @samp{NDBM} @cindex iteration loop, using @samp{NDBM} The usual way of iterating over all the records in the database is: @example for (key = dbm_firstkey (dbf); key.ptr; key = dbm_nextkey (dbf)) @{ /* do something with the key */ @} @end example The loop above should not try to delete any records from the database, otherwise the iteration is not guaranteed to cover all the keys. @xref{Sequential}, for a detailed discussion of this. @end deftypefn @deftypefn {ndbm} int dbm_error (DBM *@var{dbf}) Returns the error condition of the database: @samp{0} if no errors occurred so far while manipulating the database, and a non-zero value otherwise. @end deftypefn @deftypefn {ndbm} void dbm_clearerr (DBM *@var{dbf}) Clears the error condition of the database. @end deftypefn @deftypefn {ndbm} int dbm_dirfno (DBM *@var{dbf}) Returns the file descriptor of the @samp{dir} file of the database. It is guaranteed to be different from the descriptor returned by the @code{dbm_pagfno} function (see below). The application can lock this descriptor to serialize accesses to the database. @end deftypefn @deftypefn {ndbm} int dbm_pagfno (DBM *@var{dbf}) Returns the file descriptor of the @samp{pag} file of the database. See also @code{dbm_dirfno}. @end deftypefn @deftypefn {ndbm} int dbm_rdonly (DBM *@var{dbf}) Returns @samp{1} if the database @var{dbf} is open in a read-only mode and @samp{0} otherwise. @end deftypefn @node dbm @section DBM interface functions. @cindex DBM functions The functions below are provided for compatibility with the old UNIX @samp{DBM} interface. Only one database at a time can be manipulated using them. @deftypefn {dbm} int dbminit (char *@var{file}) Opens a database. The @var{file} argument is the full name of the database file to be opened. The function opens two files: @file{@var{file}.pag} and @file{@var{file}.dir}. If any of them does not exist, the function fails. It never attempts to create the files. The database is opened in the read-write mode, if its disk permissions permit. The application must ensure that the functions described below in this section are called only after a successful call to @code{dbminit}. @end deftypefn @deftypefn {dbm} int dbmclose (void) Closes the database opened by an earlier call to @code{dbminit}. @end deftypefn @deftypefn {dbm} datum fetch (datum @var{key}) Reads a record from the database with the matching key. The @var{key} argument supplies the key that is being looked for. If no matching record is found, the @code{dptr} member of the returned datum is @samp{NULL}. Otherwise, the @code{dptr} member of the returned datum points to the memory managed by the compatibility library. The application should never free it. @end deftypefn @deftypefn {dbm} int store (datum @var{key}, datum @var{content}) Stores the key/value pair in the database. If a record with the matching key already exists, its content will be replaced with the new one. Returns @samp{0} on success and @samp{-1} on error. @end deftypefn @deftypefn {dbm} int delete (datum @var{key}) Deletes a record with the matching key. If the function succeeds, @samp{0} is returned. Otherwise, if no matching record is found or if an error occurs, @samp{-1} is returned. @end deftypefn @deftypefn {dbm} datum firstkey (void) Initializes iteration over the keys from the database and returns the first key. Note, that the word @samp{first} does not imply any specific ordering of the keys. If there are no records in the database, the @code{dptr} member of the returned datum is @samp{NULL}. Otherwise, the @code{dptr} member of the returned datum points to the memory managed by the compatibility library. The application should never free it. @end deftypefn @deftypefn {dbm} datum nextkey (datum @var{key}) Continues the iteration started by a call to @code{firstkey}. Returns the next key in the database. If the iteration covered all keys in the database, the @code{dptr} member of the returned datum is @samp{NULL}. Otherwise, the @code{dptr} member of the returned datum points to the memory managed by the compatibility library. The application should never free it. @end deftypefn @node gdbmtool @chapter Examine and modify a GDBM database. @prindex gdbmtool The @command{gdbmtool} utility allows you to view and modify an existing @acronym{GDBM} database or to create a new one. @cindex default database, @command{gdbmtool} @flindex junk.gdbm When invoked without arguments, it tries to open a database file called @file{junk.gdbm}, located in the current working directory. You can change this default by supplying the name of the database to use as an argument to the program, e.g.: @example $ gdbmtool file.db @end example @cindex read-only mode, @command{gdbmtool} @cindex @option{-r}, @command{gdbmtool} option @cindex @option{--read-only}, @command{gdbmtool} option The database will be opened in read-write mode, unless the @option{-r} (@option{--read-only}) option is specified, in which case it will be opened only for reading. @cindex creating a database, @command{gdbmtool} @cindex @option{-n}, @command{gdbmtool} option @cindex @option{--newdb}, @command{gdbmtool} option If the database does not exist, @command{gdbmtool} will create it. There is a special option @option{-n} (@option{--newdb}, which instructs the utility to create a new database. If it is used and if the database already exists, it will be deleted, so use it sparingly. @menu * invocation:: * shell:: @end menu @node invocation @section gdbmtool invocation @cindex command line options, @command{gdbmtool} The following table summarizes all @command{gdbmtool} command line options: @table @option @item -b @var{size} @itemx --block-size=@var{size} Set block size. @item -c @var{size} @itemx --cache-size=@var{size} Set cache size. @item -f @var{file} @item --file @var{file} Read commands from @var{file}, instead of the standard input. @item -h @itemx --help Print a concise help summary. @item -N @itemx --norc Don't read startup files (@pxref{startup files}). @item -n @itemx --newdb Create the database. @item -l @itemx --no-lock Disable file locking. @item -m @itemx --no-mmap Disable mmap. @anchor{-q option} @item -q @itemx --quiet Don't print the usual welcome banner at startup. This is the same as setting the variable @samp{quiet} in the startup file. @xref{quiet}. @item -r @itemx --read-only Open the database in read-only mode. @item -s @itemx --synchronize Synchronize to the disk after each write. @item -V @itemx --version Print program version and licensing information and exit. @item --usage Print a terse invocation syntax summary along with a list of available command line options. @end table @node shell @section gdbmtool interactive mode @cindex interactive mode, @command{gdbmtool} After successful startup, @command{gdbmtool} starts a loop, in which it reads commands from the standard input, executes them and prints the results on the standard output. If the standard input is attached to a console, @command{gdbmtool} runs in interactive mode, which is indicated by its @dfn{prompt}: @example gdbmtool> _ @end example The utility finishes when it reads the @samp{quit} command (see below) or detects end-of-file on its standard input, whichever occurs first. A @command{gdbmtool} command consists of a @dfn{command verb}, optionally followed by @dfn{arguments}, separated by any amount of white space. A command verb can be entered either in full or in an abbreviated form, as long as that abbreviation does not match any other verb. For example, @samp{co} can be used instead of @samp{count} and @samp{ca} instead of @samp{cache}. Any sequence of non-whitespace characters appearing after the command verb forms an argument. If the argument contains whitespace or unprintable characters it must be enclosed in double quotes. Within double quotes the usual @dfn{escape sequences} are understood, as shown in the table below: @float Table, backslash-interpretation @caption{Backslash escapes} @multitable @columnfractions 0.30 .5 @item Sequence @tab Replaced with @item \a @tab Audible bell character (@acronym{ASCII} 7) @item \b @tab Backspace character (@acronym{ASCII} 8) @item \f @tab Form-feed character (@acronym{ASCII} 12) @item \n @tab Newline character (@acronym{ASCII} 10) @item \r @tab Carriage return character (@acronym{ASCII} 13) @item \t @tab Horizontal tabulation character (@acronym{ASCII} 9) @item \v @tab Vertical tabulation character (@acronym{ASCII} 11) @item \\ @tab Single slash @item \" @tab Double quote @end multitable @end float In addition, a backslash immediately followed by the end-of-line character effectively removes that character, allowing to split long arguments over several input lines. Command parameters may be optional or mandatory. If the number of actual arguments is less than the number of mandatory parameters, @command{gdbmtool} will prompt you to supply missing arguments. For example, the @samp{store} command takes two mandatory parameters, so if you invoked it with no arguments, you would be prompted twice to supply the necessary data, as shown in example below: @example gdbmtool> @kbd{store} key? @kbd{three} data? @kbd{3} @end example However, such prompting is possible only in interactive mode. In non-interactive mode (e.g.@: when running a script), all arguments must be supplied with each command, otherwise @command{gdbmtool} will report an error and exit immediately. @menu * variables:: shell variables. * commands:: shell commands. * definitions:: how to define structured data. * startup files:: @end menu @node variables @subsection Shell Variables @cindex variables, gdbmtool A number of @command{gdbmtool} parameters is kept in its internal variables. @deftypevr {gdbmtool variable} bool confirm Whether to ask for confirmation before certain destructive operations, such as truncating the existing database. Default is @samp{true}. @end deftypevr @deftypevr {gdbmtool variable} string ps1 Primary prompt string. Its value can contain @dfn{conversion specifiers}, consisting of the @samp{%} character followed by another character. These specifiers are expanded in the resulting prompt as follows: @multitable @columnfractions 0.4 0.5 @headitem Sequence @tab Expansion @item %f @tab name of the current database file @item %p @tab program invocation name @item %P @tab package name (@samp{GDBM}) @item %v @tab program version @item %_ @tab single space character @item %% @tab % @end multitable The default value is @samp{%p>%_}, i.e. the program name, followed by a ``greater than'' sign, followed by a single space. @end deftypevr @deftypevr {gdbmtool variable} string ps2 Secondary prompt. See @samp{ps1} for a description of its value. This prompt is displayed before reading the second and subsequent lines of a multi-line command. The default value is @samp{%_>%_}. @end deftypevr @deftypevr {gdbmtool variable} string delim1 A string used to delimit fields of a structured datum on output (@pxref{definitions}). Default is @samp{,} (a comma). This variable cannot be unset. @end deftypevr @deftypevr {gdbmtool variable} string delim2 A string used to delimit array items when printing a structured datum (@pxref{definitions}). Default is @samp{,} (a comma). This variable cannot be unset. @end deftypevr @deftypevr {gdbmtool variable} string pager The name and command line of the pager program to pipe output to. This program is used in interactive mode when the estimated number of output lines is greater then the number of lines on your screen. The default value is inherited from the environment variable @env{PAGER}. Unsetting this variable disables paging. @end deftypevr @anchor{quiet} @deftypevr {gdbmtool variable} bool quiet Whether to display a welcome banner at startup. This variable should be set in a startup script file (@pxref{startup files}). @xref{-q option}. @end deftypevr @anchor{open parameters} The following variables control how the database is opened: @deftypevr {gdbmtool variable} numeric blocksize Sets the block size. @xref{Open, block_size}. Unset by default. @end deftypevr @deftypevr {gdbmtool variable} numeric cachesize Sets the cache size. @xref{Options, GDBM_SETCACHESIZE}. By default this variable is not set. @end deftypevr @anchor{openvar} @deftypevr {gdbmtool variable} string open Open mode. The following values are allowed: @table @asis @item newdb Truncate the database if it exists or create a new one. Open it in read-write mode. Technically, this sets the @samp{GDBM_NEWDB} flag in call to @samp{gdbm_open}. @xref{Open, GDBM_NEWDB}. @item wrcreat @itemx rw Open the database in read-write mode. Create it if it does not exist. This is the default. Technically speaking, it sets the @samp{GDBM_WRCREAT} flag in call to @code{gdbm_open}. @xref{Open, GDBM_WRCREAT}. @item reader @itemx readonly Open the database in read-only mode. Signal an error if it does not exist. This sets the @samp{GDBM_READER} flag (@pxref{Open, GDBM_READER}). @end table Attempting to set any other value or to unset this variable produces an error. @end deftypevr @anchor{filemode} @deftypevr {gdbmtool variable} number filemode File mode (in octal) for creating new database files and database dumps. @end deftypevr @deftypevr {gdbmtool variable} bool lock Lock the database. This is the default. Setting this variable to false or unsetting it results in passing @samp{GDBM_NOLOCK} flag to @code{gdbm_open} (@pxref{Open, GDBM_NOLOCK}). @end deftypevr @deftypevr {gdbmtool variable} bool mmap Use memory mapping. This is the default. Setting this variable to false or unsetting it results in passing @samp{GDBM_NOMMAP} flag to @code{gdbm_open} (@pxref{Open, GDBM_NOMMAP}). @end deftypevr @deftypevr {gdbmtool variable} bool sync Flush all database writes on disk immediately. Default is false. @xref{Open, GDBM_SYNC}. @end deftypevr The following commands are used to list or modify the variables: @deffn {command verb} set [@var{assignments}] When used without arguments, lists all variables and their values. Unset variables are shown after a comment sign (@samp{#}). For string and numeric variables, values are shown after an equals sign. For boolean variables, only the variable name is displayed if the variable is @samp{true}. If it is @samp{false}, its name is prefixed with @samp{no}. For example: @example @group ps1="%p>%_" ps2="%_>%_" delim1="," delim2="," confirm # cachesize is unset # blocksize is unset open="wrcreat" lock mmap nosync pager="less" # quiet is unset @end group @end example If used with arguments, the @code{set} command alters the specified variables. In this case, arguments are variable assignments in the form @samp{@var{name}=@var{value}}. For boolean variables, the @var{value} is interpreted as follows: if it is numeric, @samp{0} stands for @samp{false}, any non-zero value stands for @samp{true}. Otherwise, the values @samp{on}, @samp{true}, and @samp{yes} denote @samp{true}, and @samp{off}, @samp{false}, @samp{no} stand for @samp{false}. Alternatively, only the name of a boolean variable can be supplied to set it to @samp{true}, and its name prefixed with @samp{no} can be used to set it to false. For example, the following command sets the @samp{delim2} variable to @samp{;} and the @samp{confirm} variable to @samp{false}: @example set delim2=";" noconfirm @end example @end deffn @deffn {command verb} unset @var{variables} Unsets the listed variables. The effect of unsetting depends on the variable. Unless explicitly described in the discussion of the variables above, unsetting a boolean variable is equivalent to setting it to @samp{false}. Unsetting a string variable is equivalent to assigning it an empty string. @end deffn @node commands @subsection Gdbmtool Commands @deffn {command verb} avail Print the @dfn{avail list}. @end deffn @deffn {command verb} bucket @var{num} Print the bucket number @var{num} and set it as the current one. @end deffn @deffn {command verb} cache Print the bucket cache. @end deffn @deffn {command verb} close Close the currently open database. @end deffn @deffn {command verb} count Print the number of entries in the database. @end deffn @deffn {command verb} current Print the current bucket. @end deffn @deffn {command verb} delete @var{key} Delete record with the given @var{key} @end deffn @deffn {command verb} dir Print hash directory. @end deffn @anchor{gdbmtool export} @deffn {command verb} export @var{file-name} [truncate] [binary|ascii] Export the database to the flat file @var{file-name}. @xref{Flat files}, for a description of the flat file format and its purposes. This command will not overwrite an existing file, unless the @samp{truncate} parameter is also given. Another optional argument determines the type of the dump (@pxref{Flat files}). By default, ASCII dump is created. The global variable @code{filemode} specifies the permissions to use for the created output file. See also @ref{gdbmexport}. @end deffn @deffn {command verb} fetch @var{key} Fetch and display the record with the given @var{key}. @end deffn @deffn {command verb} first Fetch and display the first record in the database. Subsequent records can be fetched using the @code{next} command (see below). @xref{Sequential}, for more information on sequential access. @end deffn @deffn {command verb} hash @var{key} Compute and display the hash value for the given @var{key}. @end deffn @deffn {command verb} header Print file header. @end deffn @deffn {command verb} help @deffnx {command verb} ? Print a concise command summary, showing each command verb with its parameters and a short description of what it does. Optional arguments are enclosed in square brackets. @end deffn @anchor{gdbmtool import} @deffn {command verb} import @var{file-name} [replace] [nometa] Import data from a flat dump file @var{file-name} (@pxref{Flat files}). If the word @samp{replace} is given as an argument, any records with the same keys as the already existing ones will replace them. The word @samp{nometa} turns off restoring meta-information from the dump file. @end deffn @deffn {command verb} list List the contents of the database. @end deffn @deffn {command verb} next [@var{key}] Sequential access: fetch and display the next record. If the @var{key} is given, the record following the one with this key will be fetched. See also @code{first}, above. @xref{Sequential}, for more information on sequential access. @end deffn @deffn {command verb} open @var{filename} Open the database file @var{filename}. If successful, any previously open database is closed. Otherwise, if the operation fails, the currently opened database remains unchanged. This command takes additional information from the following variables: @table @samp @item open The database access mode. @xref{openvar,, The @var{open} variable}, for a list of its values. @item lock Whether or not to lock the database. Default is @samp{on}. @item mmap Use the memory mapping. Default is @samp{on}. @item sync Synchronize after each write. Default is @samp{off}. @item filemode Specifies the permissions to use in case a new file is created. @end table @xref{open parameters}, for a detailed description of these variables. @end deffn @deffn {command verb} quit Close the database and quit the utility. @end deffn @deffn {command verb} reorganize Reorganize the database (@pxref{Reorganization}). @end deffn @deffn {command verb} source @var{filename} Read @command{gdbmtool} commands from the file @var{filename}. @end deffn @deffn {command verb} status Print current program status. The following example shows the information displayed: @example Database file: junk.gdbm Database is open define key string define content string @end example The two @samp{define} strings show the defined formats for key and content data. @xref{definitions}, for a detailed discussion of their meaning. @end deffn @deffn {command verb} store @var{key} @var{data} Store the @var{data} with @var{key} in the database. If @var{key} already exists, its data will be replaced. @end deffn @deffn {command verb} version Print the version of @command{gdbm}. @end deffn @node definitions @subsection Data Definitions GDBM databases are able to keep data of any type, both in the key and in the content part of a record. Quite often these data are structured, i.e. they consist of several fields of various types. @command{Gdbmtool} provides a mechanism for handling such kind of records. The @code{define} command defines a record structure. The general syntax is: @example define @var{what} @var{definition} @end example @noindent where @var{what} is @samp{key} to defining the structure of key data and @samp{content} to define the structure of the content records. The @var{definition} can be of two distinct formats. In the simplest case it is a single data type. For example, @example define content int @end example @noindent defines content records consisting of a single integer field. Supported data types are: @table @asis @item char Single byte (signed). @item short Signed short integer. @item ushort Unsigned short integer. @item int Signed integer. @item unsigned @itemx uint Unsigned integer. @item long Signed long integer. @item ulong Unsigned long integer. @item llong Signed long long integer. @item ullong Unsigned long long integer. @item float A floating point number. @item double Double-precision floating point number. @item string Array of bytes. @item stringz Null-terminated string, trailing null being part of the string. @end table All numeric data types (integer as well as floating point) have the same respective widths as in C language on the host where the database file resides. The @samp{string} and @samp{stringz} are special. Both define a string of bytes, similar to @samp{char x[]} in C. The former defines an array of bytes, the latter - a null-terminated string. This makes a difference, in particular, when the string is the only part of datum. Consider the following two definitions: @enumerate 1 @item @code{define key string} @item @code{define key stringz} @end enumerate @noindent Now, suppose we want to store the string "ab" in the key. Using the definition (1), the @code{dptr} member of GDBM @code{datum} will contain two bytes: @samp{a}, and @samp{b}. Consequently, the @code{dsize} member will have the value 2. Using the definition (2), the @code{dptr} member will contain three bytes: @samp{a}, @samp{b}, and ASCII 0. The @code{dsize} member will have the value 3. The definition (1) is the default for both key and content. The second form of the @code{define} statement is similar to the C @code{struct} statement and allows for defining structural data. In this form, the @var{definition} part is a comma-separated list of data types and variables enclosed in curly braces. In contrast to the rest of @command{gdbm} commands, this command is inherently multiline and is terminated with the closing curly brace. For example: @example define content @{ int status, pad 8, char id[3], string name @} @end example @noindent This defines a structure consisting of three members: an integer @code{status}, an array of 8 bytes @code{id}, and a null-terminated string @code{name}. Notice the @code{pad} statement: it allows to introduce padding between structure members. Another useful statement is @code{offset}: it specifies that the member following it begins at the given offset in the structure. Assuming the size of @code{int} is 8 bytes, the above definition can also be written as @example define content @{ int status, offset 16, char id[3], string name @} @end example @emph{NOTE}: The @samp{string} type can reasonably be used only if it is the last or the only member of the data structure. That's because it provides no information about the number of elements in the array, so it is interpreted to contain all bytes up to the end of the datum. When displaying the structured data, @command{gdbmtool} precedes each value with the corresponding field name and delimits parts of the structure with the string defined in the @samp{delim1} variable (@pxref{variables}). Array elements are delimited using the string from @samp{delim2}. For example: @example gdbmtool> fetch foo status=2,id=@{ a, u, x @},name="quux" @end example To supply a structured datum as an argument to a @command{gdbmtool} command, use the same notation, but without field names, e.g.: @example gdbmtool> hash @{ 2, @{a,u,x@}, "quux" @} hash value = 13089969. @end example @node startup files @subsection Startup Files @cindex startup file, gdbmtool @cindex init file, gdbmtool @flindex .gdbmtoolrc Upon startup @command{gdbmtool} looks for a file named @samp{.gdbmtoolrc} first in the current working directory and, if not found, in the home directory of the user who started the command. If found, this file is read and interpreted as a list of @command{gdbmtool} commands. This allows you to customize the program behavior. Following is an example startup file which disables the welcome banner, sets command line prompt to contain the name of the database file in parentheses and defines the structure of the database content records: @example @group set quiet set ps1="(%f) " define key stringz define content @{ int time, pad 4, int status @} @end group @end example @node gdbm_dump @chapter The @command{gdbm_dump} utility @prindex gdbm_dump The @command{gdbm_dump} utility creates a flat file dump of a GDBM database (@pxref{Flat files}). It takes one mandatory argument: the name of the source database file. The second argument, if given, specifies the name of the output file. If not given, @command{gdbm_dump} will produce the dump on the standard output. For example, the following invocation creates a dump of the database @file{file.db} in the file @file{file.dump}: @example $ gdbm_dump file.db file.dump @end example By default the utility creates dumps in ASCII format (@pxref{Flat files,ASCII}). Another format can be requested using the @option{--format} (@option{-H}) option. The @command{gdbm_dump} utility understands the following command line options: @table @option @item -H @var{fmt} @itemx --format=@var{fmt} Select output format. Valid values for @var{fmt} are: @samp{binary} or @samp{0} to select binary dump format, and @samp{ascii} or @samp{1} to select ASCII format. @item -h @itemx --help Print a concise help summary. @item -V @itemx --version Print program version and licensing information and exit. @item --usage Print a terse invocation syntax summary along with a list of available command line options. @end table @node gdbm_load @chapter The @command{gdbm_load} utility @prindex gdbm_load The @command{gdbm_load} utility restores a GDBM database from a flat file. The utility requires at least one argument: the name of the input flat file. If it is @samp{-}, the standard input will be read. The format of the input file is detected automatically. By default the utility attempts to restore the database under its original name, as stored in the input file. It will fail to do so if the input is in binary format. In that case, the name of the database must be given as the second argument. In general, if two arguments are given the second one is treated as the name of the database to create, overriding the file name specified in the flat file. The utility understands the following command line arguments: @table @option @item -b @var{num} @itemx --block-size=@var{num} Sets block size. @xref{Open, block_size}. @item -c @var{num} @itemx --cache-size=@var{num} Sets cache size. @xref{Options, GDBM_SETCACHESIZE}. @item -M @itemx --mmap Use memory mapping. @item -m @var{mode} @item --mode=@var{mode} Sets the file mode. The argument is the desired file mode in octal. @item -n @itemx --no-meta Do not restore file meta-data (ownership and mode) from the flat file. @item -r @itemx --replace Replace existing keys. @item -u @var{user}[:@var{group}] @itemx --user=@var{user}[:@var{group}] Set file owner. The @var{user} can be either a valid user name or UID. Similarly, the @var{group} is either a valid group name or GID. If @var{group} is not given, the main group of @var{user} is used. User and group parts can be separated by a dot, instead of the colon. @item -h @itemx --help Print a concise help summary. @item -V @itemx --version Print program version and licensing information and exit. @item --usage Print a terse invocation syntax summary along with a list of available command line options. @end table @node gdbmexport @chapter Export a database into a portable format. @prindex gdbmexport The @command{gdbmexport} utility converts the database of an older GDBM version into a binary flat format. The utility takes two mandatory arguments: the name of the database file to convert and the output file name, e.g.: @example $ gdbmexport junk.gdbm junk.flat @end example In addition the following two options are understood: @table @option @item -h Display short usage summary and exit. @item -v Display program version and licensing information, and exit. @end table @node Exit codes @chapter Exit codes @cindex exit code All GDBM utilities return uniform exit codes. These are summarized in the table below: @multitable @columnfractions 0.3 0.7 @headitem Code @tab Meaning @item 0 @tab Successful termination. @item 1 @tab A fatal error occurred. @item 2 @tab Program was unable to restore file ownership or mode. @item 3 @tab Command line usage error. @end multitable @node Bugs @chapter Problems and bugs. If you have problems with GNU @code{dbm} or think you've found a bug, please report it. Before reporting a bug, make sure you've actually found a real bug. Carefully reread the documentation and see if it really says you can do what you're trying to do. If it's not clear whether you should be able to do something or not, report that too; it's a bug in the documentation! Before reporting a bug or trying to fix it yourself, try to isolate it to the smallest possible input file that reproduces the problem. Then send us the input file and the exact results @code{gdbm} gave you. Also say what you expected to occur; this will help us decide whether the problem was really in the documentation. Once you've got a precise problem, send e-mail to @email{bug-gdbm@@gnu.org}. Please include the version number of GNU @code{dbm} you are using. You can get this information by printing the variable @code{gdbm_version} (@pxref{Variables}). Non-bug suggestions are always welcome as well. If you have questions about things that are unclear in the documentation or are just obscure features, please report them too. You may contact the authors and maintainers by e-mail: @example @email{phil@@cs.wwu.edu}, @email{downsj@@downsj.com}, @email{gray@@gnu.org.ua} @end example @node Resources @chapter Additional resources For the latest updates and pointers to additional resources, visit @uref{http://www.gnu.org/@/software/@/gdbm}. In particular, a copy of @code{gdbm} documentation in various formats is available online at @uref{http://www.gnu.org/@/software/@/gdbm/@/manual.html}. Latest versions of @code{gdbm} can be downloaded from anonymous FTP: @uref{ftp://ftp.gnu.org/@/gnu/@/gdbm}, or via HTTP from @uref{http://ftp.gnu.org/@/gnu/@/gdbm}, or from any @ifhtml @uref{http://www.gnu.org/order/ftp.html,,GNU mirror} worldwide. @end ifhtml @ifnothtml GNU mirror worldwide. See @uref{http://www.gnu.org/@/order/@/ftp.html}, for a list of mirrors. @end ifnothtml To track @code{gdbm} development, visit @uref{http://puszcza.gnu.org.ua/@/projects/@/gdbm}. @node GNU Free Documentation License @appendix GNU Free Documentation License @include fdl.texi @node Index @unnumbered Index @printindex cp @bye