From 67d3121cc7a2193c151a925e8c6cfe407c2df7cf Mon Sep 17 00:00:00 2001
From: meissner <meissner@138bc75d-0d04-0410-961f-82ee72b054a4>
Date: Wed, 11 May 2016 18:38:10 +0000
Subject: [gcc] 2016-05-11  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/predicates.md (quad_memory_operand): Move most of
	the code into quad_address_p and call it to share code with
	vsx_quad_dform_memory_operand.
	(vsx_quad_dform_memory_operand): New predicate for ISA 3.0 vector
	d-form support.
	* config/rs6000/rs6000.opt (-mlra): Switch to being an option mask
	bit instead of being a separate word.  Split -mpower9-dform into
	two switches, -mpower9-dform-scalar and -mpower9-dform-vector.
	* config/rs6000/rs6000.c (RELOAD_REG_QUAD_OFFSET): New addr_mask
	for the register class supporting 128-bit quad word memory
	offsets.
	(mode_supports_vsx_dform_quad): Helper function to return if the
	register class uses quad word memory offsets.
	(rs6000_debug_addr_mask): Add support for quad word memory
	offsets.
	(rs6000_debug_reg_global): Always print if we are using LRA or
	not.
	(rs6000_setup_reg_addr_masks): If ISA 3.0 vector d-form
	instructions are enabled, set up the appropriate addr_masks for
	128-bit types.
	(rs6000_init_hard_regno_mode_ok): wb constraint is now based on
	-mpower9-dform-scalar, instead of -mpower9-dform.
	(rs6000_option_override_internal): Split -mpower9-dform into two
	switches, -mpower9-dform-scalar and -mpower9-dform-vector.  The
	-mpower9-dform switch sets or clears both.  If we are not using
	the LRA register allocator, do not enable -mpower9-dform-vector by
	default.  If we are using LRA, enable -mpower9-dform-vector and
	-mvsx-timode if it is appropriate.  Issue a warning if either
	-mpower9-dform-vector or -mvsx-timode are explicitly used without
	enabling LRA.
	(quad_address_offset_p): New helper function to return if the
	offset is legal for quad word memory instructions.
	(quad_address_p): New function to determin if GPR or vector
	register quad word memory addresses are legal.
	(mem_operand_gpr): Validate quad word address offsets.
	(reg_offset_addressing_ok_p): Add support for ISA 3.0 vector
	d-form (register + offset) instructions.
	(offsettable_ok_by_alignment): Likewise.
	(rs6000_legitimate_offset_address_p): Likewise.
	(legitimate_lo_sum_address_p): Likewise.
	(rs6000_legitimize_address): Likewise.
	(rs6000_legitimize_reload_address): Add more debug statements for
	-mdebug=addr.
	(rs6000_legitimate_address_p): Add support for ISA 3.0 vector
	d-form instructions.
	(rs6000_secondary_reload_memory): Add support for ISA 3.0 vector
	d-form instructions.  Distinguish different cases in debug
	output.	(rs6000_secondary_reload_inner): Add support for ISA 3.0 vector
	d-form instructions.
	(rs6000_preferred_reload_class): Likewise.
	(rs6000_output_move_128bit): Add support for ISA 3.0 d-form
	instructions.  If ISA 3.0 is available, generate lxvx/stxvx instead
	of the ISA 2.06 indexed memory instructions.
	(rs6000_emit_prologue): If we have ISA 3.0 d-form instructions,
	use them to save/restore the saved vector registers instead of
	using Altivec instructions.
	(rs6000_emit_epilogue): Likewise.
	(rs6000_lra_p): Use TARGET_LRA instead of the old option word.
	(rs6000_opt_masks): Split -mpower9-dform into
	-mpower9-dform-scalar and -mpower9-dform-vector.
	(rs6000_print_options_internal): Print -mno-<switch> if <switch>
	was not selected.
	* config/rs6000/vsx.md (p9_vecload_<mode>): Delete hack to emit
	ISA 3.0 vector indexed memory instructions, and fold the code into
	the normal mov<mode> patterns.
	(p9_vecstore_<mode>): Likewise.
	(vsx_mov<mode>): Add support for ISA 3.0 vector d-form
	instructions.
	(vsx_movti_64bit): Likewise.
	(vsx_movti_32bit): Likewise.
	* config/rs6000/constraints.md (wO constraint): New constraint for
	ISA 3.0 vector d-form support.
	* config/rs6000/rs6000-cpus.def (ISA_3_0_MASKS_SERVER): Use
	-mpower9-dform-scalar instead of -mpower9-dform.  Add note not to
	include -mpower9-dform-vector until we switch over to LRA.
	(POWERPC_MASKS): Add -mlra. Split -mpower9-dform into two.
	switches, -mpower9-dform-scalar and -mpower9-dform-vector.
	* config/rs6000/rs6000-protos.h (quad_address_p): Add declaration.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Add documentation
	for -mpower9-dform and -mlra.
	* doc/md.texi (wO constraint): Document wO constraint.

[gcc/testsuite]
2016-05-11  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* gcc.target/powerpc/dform-3.c: New test for ISA 3.0 vector d-form
	support.
	* gcc.target/powerpc/dform-1.c: Add -mlra option to silence
	warning when using -mvsx-timode.
	* gcc.target/powerpc/p8vector-int128-1.c: Likewise.
	* gcc.target/powerpc/dform-2.c: Likewise.
	* gcc.target/powerpc/pr68805.c: Likewise.



git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@236133 138bc75d-0d04-0410-961f-82ee72b054a4
---
 gcc/config/rs6000/rs6000.c | 537 ++++++++++++++++++++++++++++++++++++---------
 1 file changed, 433 insertions(+), 104 deletions(-)

(limited to 'gcc/config/rs6000/rs6000.c')

diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c
index 0f70bb91126..3f721c67cd5 100644
--- a/gcc/config/rs6000/rs6000.c
+++ b/gcc/config/rs6000/rs6000.c
@@ -452,6 +452,7 @@ typedef unsigned char addr_mask_type;
 #define RELOAD_REG_PRE_INCDEC	0x10	/* PRE_INC/PRE_DEC valid.  */
 #define RELOAD_REG_PRE_MODIFY	0x20	/* PRE_MODIFY valid.  */
 #define RELOAD_REG_AND_M16	0x40	/* AND -16 addressing.  */
+#define RELOAD_REG_QUAD_OFFSET	0x80	/* quad offset is limited.  */
 
 /* Register type masks based on the type, of valid addressing modes.  */
 struct rs6000_reg_addr {
@@ -499,6 +500,16 @@ mode_supports_vmx_dform (machine_mode mode)
   return ((reg_addr[mode].addr_mask[RELOAD_REG_VMX] & RELOAD_REG_OFFSET) != 0);
 }
 
+/* Return true if we have D-form addressing in VSX registers.  This addressing
+   is more limited than normal d-form addressing in that the offset must be
+   aligned on a 16-byte boundary.  */
+static inline bool
+mode_supports_vsx_dform_quad (machine_mode mode)
+{
+  return ((reg_addr[mode].addr_mask[RELOAD_REG_ANY] & RELOAD_REG_QUAD_OFFSET)
+	  != 0);
+}
+
 
 /* Target cpu costs.  */
 
@@ -2111,7 +2122,9 @@ rs6000_debug_addr_mask (addr_mask_type mask, bool keep_spaces)
   else if (keep_spaces)
     *p++ = ' ';
 
-  if ((mask & RELOAD_REG_OFFSET) != 0)
+  if ((mask & RELOAD_REG_QUAD_OFFSET) != 0)
+    *p++ = 'O';
+  else if ((mask & RELOAD_REG_OFFSET) != 0)
     *p++ = 'o';
   else if (keep_spaces)
     *p++ = ' ';
@@ -2648,8 +2661,7 @@ rs6000_debug_reg_global (void)
   if (TARGET_LINK_STACK)
     fprintf (stderr, DEBUG_FMT_S, "link_stack", "true");
 
-  if (targetm.lra_p ())
-    fprintf (stderr, DEBUG_FMT_S, "lra", "true");
+  fprintf (stderr, DEBUG_FMT_S, "lra", TARGET_LRA ? "true" : "false");
 
   if (TARGET_P8_FUSION)
     {
@@ -2784,17 +2796,31 @@ rs6000_setup_reg_addr_masks (void)
 	    }
 
 	  /* GPR and FPR registers can do REG+OFFSET addressing, except
-	     possibly for SDmode.  ISA 3.0 (i.e. power9) adds D-form
-	     addressing for scalars to altivec registers.  */
+	     possibly for SDmode.  ISA 3.0 (i.e. power9) adds D-form addressing
+	     for 64-bit scalars and 32-bit SFmode to altivec registers.  */
 	  if ((addr_mask != 0) && !indexed_only_p
 	      && msize <= 8
 	      && (rc == RELOAD_REG_GPR
-		  || rc == RELOAD_REG_FPR
-		  || (rc == RELOAD_REG_VMX
-		      && TARGET_P9_DFORM
-		      && (m2 == DFmode || m2 == SFmode))))
+		  || ((msize == 8 || m2 == SFmode)
+		      && (rc == RELOAD_REG_FPR
+			  || (rc == RELOAD_REG_VMX
+			      && TARGET_P9_DFORM_SCALAR)))))
 	    addr_mask |= RELOAD_REG_OFFSET;
 
+	  /* VSX registers can do REG+OFFSET addresssing if ISA 3.0
+	     instructions are enabled.  The offset for 128-bit VSX registers is
+	     only 12-bits.  While GPRs can handle the full offset range, VSX
+	     registers can only handle the restricted range.  */
+	  else if ((addr_mask != 0) && !indexed_only_p
+		   && msize == 16 && TARGET_P9_DFORM_VECTOR
+		   && (ALTIVEC_OR_VSX_VECTOR_MODE (m2)
+		       || (m2 == TImode && TARGET_VSX_TIMODE)))
+	    {
+	      addr_mask |= RELOAD_REG_OFFSET;
+	      if (rc == RELOAD_REG_FPR || rc == RELOAD_REG_VMX)
+		addr_mask |= RELOAD_REG_QUAD_OFFSET;
+	    }
+
 	  /* VMX registers can do (REG & -16) and ((REG+REG) & -16)
 	     addressing on 128-bit types.  */
 	  if (rc == RELOAD_REG_VMX && msize == 16
@@ -3117,7 +3143,7 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p)
     }
 
   /* Support for new D-form instructions.  */
-  if (TARGET_P9_DFORM)
+  if (TARGET_P9_DFORM_SCALAR)
     rs6000_constraints[RS6000_CONSTRAINT_wb] = ALTIVEC_REGS;
 
   /* Support for ISA 3.0 (power9) vectors.  */
@@ -3990,7 +4016,8 @@ rs6000_option_override_internal (bool global_init_p)
 
   /* For the newer switches (vsx, dfp, etc.) set some of the older options,
      unless the user explicitly used the -mno-<option> to disable the code.  */
-  if (TARGET_P9_VECTOR || TARGET_MODULO || TARGET_P9_DFORM || TARGET_P9_MINMAX)
+  if (TARGET_P9_VECTOR || TARGET_MODULO || TARGET_P9_DFORM_SCALAR
+      || TARGET_P9_DFORM_VECTOR || TARGET_P9_DFORM_BOTH > 0 || TARGET_P9_MINMAX)
     rs6000_isa_flags |= (ISA_3_0_MASKS_SERVER & ~rs6000_isa_flags_explicit);
   else if (TARGET_P8_VECTOR || TARGET_DIRECT_MOVE || TARGET_CRYPTO)
     rs6000_isa_flags |= (ISA_2_7_MASKS_SERVER & ~rs6000_isa_flags_explicit);
@@ -4204,26 +4231,49 @@ rs6000_option_override_internal (bool global_init_p)
       && !(rs6000_isa_flags_explicit & OPTION_MASK_TOC_FUSION))
     rs6000_isa_flags |= OPTION_MASK_TOC_FUSION;
 
+  /* -mpower9-dform turns on both -mpower9-dform-scalar and
+      -mpower9-dform-vector. There are currently problems if
+      -mpower9-dform-vector instructions are enabled when we use the RELOAD
+      register allocator.  */
+  if (TARGET_P9_DFORM_BOTH > 0)
+    {
+      if (!(rs6000_isa_flags_explicit & OPTION_MASK_P9_DFORM_VECTOR)
+	  && TARGET_LRA)
+	rs6000_isa_flags |= OPTION_MASK_P9_DFORM_VECTOR;
+
+      if (!(rs6000_isa_flags_explicit & OPTION_MASK_P9_DFORM_SCALAR))
+	rs6000_isa_flags |= OPTION_MASK_P9_DFORM_SCALAR;
+    }
+  else if (TARGET_P9_DFORM_BOTH == 0)
+    {
+      if (!(rs6000_isa_flags_explicit & OPTION_MASK_P9_DFORM_VECTOR))
+	rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM_VECTOR;
+
+      if (!(rs6000_isa_flags_explicit & OPTION_MASK_P9_DFORM_SCALAR))
+	rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM_SCALAR;
+    }
+
   /* ISA 3.0 D-form instructions require p9-vector and upper-regs.  */
-  if (TARGET_P9_DFORM && !TARGET_P9_VECTOR)
+  if ((TARGET_P9_DFORM_SCALAR || TARGET_P9_DFORM_VECTOR) && !TARGET_P9_VECTOR)
     {
       if (rs6000_isa_flags_explicit & OPTION_MASK_P9_VECTOR)
 	error ("-mpower9-dform requires -mpower9-vector");
-      rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM;
+      rs6000_isa_flags &= ~(OPTION_MASK_P9_DFORM_SCALAR
+			    | OPTION_MASK_P9_DFORM_VECTOR);
     }
 
-  if (TARGET_P9_DFORM && !TARGET_UPPER_REGS_DF)
+  if (TARGET_P9_DFORM_SCALAR && !TARGET_UPPER_REGS_DF)
     {
       if (rs6000_isa_flags_explicit & OPTION_MASK_UPPER_REGS_DF)
 	error ("-mpower9-dform requires -mupper-regs-df");
-      rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM;
+      rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM_SCALAR;
     }
 
-  if (TARGET_P9_DFORM && !TARGET_UPPER_REGS_SF)
+  if (TARGET_P9_DFORM_SCALAR && !TARGET_UPPER_REGS_SF)
     {
       if (rs6000_isa_flags_explicit & OPTION_MASK_UPPER_REGS_SF)
 	error ("-mpower9-dform requires -mupper-regs-sf");
-      rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM;
+      rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM_SCALAR;
     }
 
   /* ISA 3.0 vector instructions include ISA 2.07.  */
@@ -4234,6 +4284,47 @@ rs6000_option_override_internal (bool global_init_p)
       rs6000_isa_flags &= ~OPTION_MASK_P9_VECTOR;
     }
 
+  /* There have been bugs with both -mvsx-timode and -mpower9-dform-vector that
+     don't show up with -mlra, but do show up with -mno-lra.  Given -mlra will
+     become the default once PR 69847 is fixed, turn off the options with
+     problems by default if -mno-lra was used, and warn if the user explicitly
+     asked for the option.
+
+     Enable -mpower9-dform-vector by default if LRA and other power9 options.
+     Enable -mvsx-timode by default if LRA and VSX.  */
+  if (!TARGET_LRA)
+    {
+      if (TARGET_VSX_TIMODE)
+	{
+	  if ((rs6000_isa_flags_explicit & OPTION_MASK_VSX_TIMODE) != 0)
+	    warning (0, "-mvsx-timode might need -mlra");
+
+	  else
+	    rs6000_isa_flags &= ~OPTION_MASK_VSX_TIMODE;
+	}
+
+      if (TARGET_P9_DFORM_VECTOR)
+	{
+	  if ((rs6000_isa_flags_explicit & OPTION_MASK_P9_DFORM_VECTOR) != 0)
+	    warning (0, "-mpower9-dform-vector might need -mlra");
+
+	  else
+	    rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM_VECTOR;
+	}
+    }
+
+  else
+    {
+      if (TARGET_VSX && !TARGET_VSX_TIMODE
+	  && (rs6000_isa_flags_explicit & OPTION_MASK_VSX_TIMODE) == 0)
+	rs6000_isa_flags |= OPTION_MASK_VSX_TIMODE;
+
+      if (TARGET_VSX && TARGET_P9_VECTOR && !TARGET_P9_DFORM_VECTOR
+	  && TARGET_P9_DFORM_SCALAR && TARGET_P9_DFORM_BOTH < 0
+	  && (rs6000_isa_flags_explicit & OPTION_MASK_P9_DFORM_VECTOR) == 0)
+	rs6000_isa_flags |= OPTION_MASK_P9_DFORM_VECTOR;
+    }
+
   /* Set -mallow-movmisalign to explicitly on if we have full ISA 2.07
      support. If we only have ISA 2.06 support, and the user did not specify
      the switch, leave it set to -1 so the movmisalign patterns are enabled,
@@ -6918,6 +7009,59 @@ direct_move_p (rtx op0, rtx op1)
   return false;
 }
 
+/* Return true if the OFFSET is valid for the quad address instructions that
+   use d-form (register + offset) addressing.  */
+
+static inline bool
+quad_address_offset_p (HOST_WIDE_INT offset)
+{
+  return (IN_RANGE (offset, -32768, 32767) && ((offset) & 0xf) == 0);
+}
+
+/* Return true if the ADDR is an acceptable address for a quad memory
+   operation of mode MODE (either LQ/STQ for general purpose registers, or
+   LXV/STXV for vector registers under ISA 3.0.  GPR_P is true if this address
+   is intended for LQ/STQ.  If it is false, the address is intended for the ISA
+   3.0 LXV/STXV instruction.  */
+
+bool
+quad_address_p (rtx addr, machine_mode mode, bool gpr_p)
+{
+  rtx op0, op1;
+
+  if (GET_MODE_SIZE (mode) != 16)
+    return false;
+
+  if (gpr_p)
+    {
+      if (!TARGET_QUAD_MEMORY && !TARGET_SYNC_TI)
+	return false;
+
+      /* LQ/STQ can handle indirect addresses.  */
+      if (base_reg_operand (addr, Pmode))
+	return true;
+    }
+
+  else
+    {
+      if (!mode_supports_vsx_dform_quad (mode))
+	return false;
+    }
+
+  if (GET_CODE (addr) != PLUS)
+    return false;
+
+  op0 = XEXP (addr, 0);
+  if (!base_reg_operand (op0, Pmode))
+    return false;
+
+  op1 = XEXP (addr, 1);
+  if (!CONST_INT_P (op1))
+    return false;
+
+  return quad_address_offset_p (INTVAL (op1));
+}
+
 /* Return true if this is a load or store quad operation.  This function does
    not handle the atomic quad memory instructions.  */
 
@@ -7010,6 +7154,10 @@ mem_operand_gpr (rtx op, machine_mode mode)
   if (TARGET_POWERPC64 && (offset & 3) != 0)
     return false;
 
+  if (mode_supports_vsx_dform_quad (mode)
+      && !quad_address_offset_p (offset))
+    return false;
+
   extra = GET_MODE_SIZE (mode) - UNITS_PER_WORD;
   if (extra < 0)
     extra = 0;
@@ -7039,13 +7187,14 @@ reg_offset_addressing_ok_p (machine_mode mode)
     case TImode:
     case TFmode:
     case KFmode:
-      /* AltiVec/VSX vector modes.  Only reg+reg addressing is valid.  While
-	 TImode is not a vector mode, if we want to use the VSX registers to
-	 move it around, we need to restrict ourselves to reg+reg addressing.
-	 Similarly for IEEE 128-bit floating point that is passed in a single
-	 vector register.  */
+      /* AltiVec/VSX vector modes.  Only reg+reg addressing was valid until the
+	 ISA 3.0 vector d-form addressing mode was added.  While TImode is not
+	 a vector mode, if we want to use the VSX registers to move it around,
+	 we need to restrict ourselves to reg+reg addressing.  Similarly for
+	 IEEE 128-bit floating point that is passed in a single vector
+	 register.  */
       if (VECTOR_MEM_ALTIVEC_OR_VSX_P (mode))
-	return false;
+	return mode_supports_vsx_dform_quad (mode);
       break;
 
     case V4HImode:
@@ -7112,6 +7261,11 @@ offsettable_ok_by_alignment (rtx op, HOST_WIDE_INT offset,
   if (GET_CODE (op) != SYMBOL_REF)
     return false;
 
+  /* ISA 3.0 vector d-form addressing is restricted, don't allow
+     SYMBOL_REF.  */
+  if (mode_supports_vsx_dform_quad (mode))
+    return false;
+
   dsize = GET_MODE_SIZE (mode);
   decl = SYMBOL_REF_DECL (op);
   if (!decl)
@@ -7266,6 +7420,9 @@ rs6000_legitimate_offset_address_p (machine_mode mode, rtx x,
     return false;
   if (!INT_REG_OK_FOR_BASE_P (XEXP (x, 0), strict))
     return false;
+  if (mode_supports_vsx_dform_quad (mode))
+    return (virtual_stack_registers_memory_p (x)
+	    || quad_address_p (x, mode, false));
   if (!reg_offset_addressing_ok_p (mode))
     return virtual_stack_registers_memory_p (x);
   if (legitimate_constant_pool_address_p (x, mode, strict || lra_in_progress))
@@ -7404,6 +7561,9 @@ legitimate_lo_sum_address_p (machine_mode mode, rtx x, int strict)
     return false;
   if (!INT_REG_OK_FOR_BASE_P (XEXP (x, 0), strict))
     return false;
+  /* quad word addresses are restricted, and we can't use LO_SUM.  */
+  if (mode_supports_vsx_dform_quad (mode))
+    return false;
   /* Restrict addressing for DI because of our SUBREG hackery.  */
   if (TARGET_E500_DOUBLE && GET_MODE_SIZE (mode) > UNITS_PER_WORD)
     return false;
@@ -7415,7 +7575,7 @@ legitimate_lo_sum_address_p (machine_mode mode, rtx x, int strict)
 
       if (DEFAULT_ABI == ABI_V4 && flag_pic)
 	return false;
-      /* LRA don't use LEGITIMIZE_RELOAD_ADDRESS as it usually calls
+      /* LRA doesn't use LEGITIMIZE_RELOAD_ADDRESS as it usually calls
 	 push_reload from reload pass code.  LEGITIMIZE_RELOAD_ADDRESS
 	 recognizes some LO_SUM addresses as valid although this
 	 function says opposite.  In most cases, LRA through different
@@ -7469,7 +7629,8 @@ rs6000_legitimize_address (rtx x, rtx oldx ATTRIBUTE_UNUSED,
 {
   unsigned int extra;
 
-  if (!reg_offset_addressing_ok_p (mode))
+  if (!reg_offset_addressing_ok_p (mode)
+      || mode_supports_vsx_dform_quad (mode))
     {
       if (virtual_stack_registers_memory_p (x))
 	return x;
@@ -8180,6 +8341,11 @@ rs6000_legitimize_reload_address (rtx x, machine_mode mode,
       && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
       && GET_CODE (XEXP (x, 1)) == CONST_INT)
     {
+      if (TARGET_DEBUG_ADDR)
+	{
+	  fprintf (stderr, "\nlegitimize_reload_address push_reload #1:\n");
+	  debug_rtx (x);
+	}
       push_reload (XEXP (x, 0), NULL_RTX, &XEXP (x, 0), NULL,
 		   BASE_REG_CLASS, GET_MODE (x), VOIDmode, 0, 0,
 		   opnum, (enum reload_type) type);
@@ -8191,6 +8357,11 @@ rs6000_legitimize_reload_address (rtx x, machine_mode mode,
   if (GET_CODE (x) == LO_SUM
       && GET_CODE (XEXP (x, 0)) == HIGH)
     {
+      if (TARGET_DEBUG_ADDR)
+	{
+	  fprintf (stderr, "\nlegitimize_reload_address push_reload #2:\n");
+	  debug_rtx (x);
+	}
       push_reload (XEXP (x, 0), NULL_RTX, &XEXP (x, 0), NULL,
 		   BASE_REG_CLASS, Pmode, VOIDmode, 0, 0,
 		   opnum, (enum reload_type) type);
@@ -8223,6 +8394,11 @@ rs6000_legitimize_reload_address (rtx x, machine_mode mode,
     {
       rtx hi = gen_rtx_HIGH (Pmode, copy_rtx (x));
       x = gen_rtx_LO_SUM (Pmode, hi, x);
+      if (TARGET_DEBUG_ADDR)
+	{
+	  fprintf (stderr, "\nlegitimize_reload_address push_reload #3:\n");
+	  debug_rtx (x);
+	}
       push_reload (XEXP (x, 0), NULL_RTX, &XEXP (x, 0), NULL,
 		   BASE_REG_CLASS, Pmode, VOIDmode, 0, 0,
 		   opnum, (enum reload_type) type);
@@ -8260,6 +8436,11 @@ rs6000_legitimize_reload_address (rtx x, machine_mode mode,
 				      GEN_INT (high)),
 			GEN_INT (low));
 
+      if (TARGET_DEBUG_ADDR)
+	{
+	  fprintf (stderr, "\nlegitimize_reload_address push_reload #4:\n");
+	  debug_rtx (x);
+	}
       push_reload (XEXP (x, 0), NULL_RTX, &XEXP (x, 0), NULL,
 		   BASE_REG_CLASS, GET_MODE (x), VOIDmode, 0, 0,
 		   opnum, (enum reload_type) type);
@@ -8320,6 +8501,11 @@ rs6000_legitimize_reload_address (rtx x, machine_mode mode,
 	x = gen_rtx_LO_SUM (GET_MODE (x),
 	      gen_rtx_HIGH (Pmode, x), x);
 
+      if (TARGET_DEBUG_ADDR)
+	{
+	  fprintf (stderr, "\nlegitimize_reload_address push_reload #5:\n");
+	  debug_rtx (x);
+	}
       push_reload (XEXP (x, 0), NULL_RTX, &XEXP (x, 0), NULL,
 		   BASE_REG_CLASS, Pmode, VOIDmode, 0, 0,
 		   opnum, (enum reload_type) type);
@@ -8353,9 +8539,16 @@ rs6000_legitimize_reload_address (rtx x, machine_mode mode,
     {
       x = create_TOC_reference (x, NULL_RTX);
       if (TARGET_CMODEL != CMODEL_SMALL)
-	push_reload (XEXP (x, 0), NULL_RTX, &XEXP (x, 0), NULL,
-		     BASE_REG_CLASS, Pmode, VOIDmode, 0, 0,
-		     opnum, (enum reload_type) type);
+	{
+	  if (TARGET_DEBUG_ADDR)
+	    {
+	      fprintf (stderr, "\nlegitimize_reload_address push_reload #6:\n");
+	      debug_rtx (x);
+	    }
+	  push_reload (XEXP (x, 0), NULL_RTX, &XEXP (x, 0), NULL,
+		       BASE_REG_CLASS, Pmode, VOIDmode, 0, 0,
+		       opnum, (enum reload_type) type);
+	}
       *win = 1;
       return x;
     }
@@ -8411,6 +8604,7 @@ static bool
 rs6000_legitimate_address_p (machine_mode mode, rtx x, bool reg_ok_strict)
 {
   bool reg_offset_p = reg_offset_addressing_ok_p (mode);
+  bool quad_offset_p = mode_supports_vsx_dform_quad (mode);
 
   /* If this is an unaligned stvx/ldvx type address, discard the outer AND.  */
   if (VECTOR_MEM_ALTIVEC_P (mode)
@@ -8430,15 +8624,26 @@ rs6000_legitimate_address_p (machine_mode mode, rtx x, bool reg_ok_strict)
     return 1;
   if (virtual_stack_registers_memory_p (x))
     return 1;
-  if (reg_offset_p && legitimate_small_data_p (mode, x))
-    return 1;
-  if (reg_offset_p
-      && legitimate_constant_pool_address_p (x, mode,
+
+  /* Handle restricted vector d-form offsets in ISA 3.0.  */
+  if (quad_offset_p)
+    {
+      if (quad_address_p (x, mode, false))
+	return 1;
+    }
+
+  else if (reg_offset_p)
+    {
+      if (legitimate_small_data_p (mode, x))
+	return 1;
+      if (legitimate_constant_pool_address_p (x, mode,
 					     reg_ok_strict || lra_in_progress))
-    return 1;
-  if (reg_offset_p && reg_addr[mode].fused_toc && GET_CODE (x) == UNSPEC
-      && XINT (x, 1) == UNSPEC_FUSION_ADDIS)
-    return 1;
+	return 1;
+      if (reg_addr[mode].fused_toc && GET_CODE (x) == UNSPEC
+	  && XINT (x, 1) == UNSPEC_FUSION_ADDIS)
+	return 1;
+    }
+
   /* For TImode, if we have load/store quad and TImode in VSX registers, only
      allow register indirect addresses.  This will allow the values to go in
      either GPRs or VSX registers without reloading.  The vector types would
@@ -8477,7 +8682,8 @@ rs6000_legitimate_address_p (machine_mode mode, rtx x, bool reg_ok_strict)
 	      && legitimate_indexed_address_p (XEXP (x, 1), reg_ok_strict)))
       && rtx_equal_p (XEXP (XEXP (x, 1), 0), XEXP (x, 0)))
     return 1;
-  if (reg_offset_p && legitimate_lo_sum_address_p (mode, x, reg_ok_strict))
+  if (reg_offset_p && !quad_offset_p
+      && legitimate_lo_sum_address_p (mode, x, reg_ok_strict))
     return 1;
   return 0;
 }
@@ -18423,13 +18629,23 @@ rs6000_secondary_reload_memory (rtx addr,
 	    }
 	}
 
+      else if ((addr_mask & RELOAD_REG_QUAD_OFFSET) != 0
+	       && CONST_INT_P (plus_arg1))
+	{
+	  if (!quad_address_offset_p (INTVAL (plus_arg1)))
+	    {
+	      extra_cost = 1;
+	      type = "vector d-form offset";
+	    }
+	}
+
       /* Make sure the register class can handle offset addresses.  */
       else if (rs6000_legitimate_offset_address_p (mode, addr, false, true))
 	{
 	  if ((addr_mask & RELOAD_REG_OFFSET) == 0)
 	    {
 	      extra_cost = 1;
-	      type = "offset";
+	      type = "offset #2";
 	    }
 	}
 
@@ -18442,7 +18658,14 @@ rs6000_secondary_reload_memory (rtx addr,
       break;
 
     case LO_SUM:
-      if (!legitimate_lo_sum_address_p (mode, addr, false))
+      /* Quad offsets are restricted and can't handle normal addresses.  */
+      if ((addr_mask & RELOAD_REG_QUAD_OFFSET) != 0)
+	{
+	  extra_cost = -1;
+	  type = "vector d-form lo_sum";
+	}
+
+      else if (!legitimate_lo_sum_address_p (mode, addr, false))
 	{
 	  fail_msg = "bad LO_SUM";
 	  extra_cost = -1;
@@ -18459,8 +18682,17 @@ rs6000_secondary_reload_memory (rtx addr,
     case CONST:
     case SYMBOL_REF:
     case LABEL_REF:
-      type = "address";
-      extra_cost = rs6000_secondary_reload_toc_costs (addr_mask);
+      if ((addr_mask & RELOAD_REG_QUAD_OFFSET) != 0)
+	{
+	  extra_cost = -1;
+	  type = "vector d-form lo_sum #2";
+	}
+
+      else
+	{
+	  type = "address";
+	  extra_cost = rs6000_secondary_reload_toc_costs (addr_mask);
+	}
       break;
 
       /* TOC references look like offsetable memory.  */
@@ -18471,6 +18703,12 @@ rs6000_secondary_reload_memory (rtx addr,
 	  extra_cost = -1;
 	}
 
+      else if ((addr_mask & RELOAD_REG_QUAD_OFFSET) != 0)
+	{
+	  extra_cost = -1;
+	  type = "vector d-form lo_sum #3";
+	}
+
       else if ((addr_mask & RELOAD_REG_OFFSET) == 0)
 	{
 	  extra_cost = 1;
@@ -19101,6 +19339,16 @@ rs6000_secondary_reload_inner (rtx reg, rtx mem, rtx scratch, bool store_p)
 	    }
 	}
 
+      else if (mode_supports_vsx_dform_quad (mode) && CONST_INT_P (op1))
+	{
+	  if (((addr_mask & RELOAD_REG_QUAD_OFFSET) == 0)
+	      || !quad_address_p (addr, mode, false))
+	    {
+	      emit_insn (gen_rtx_SET (scratch, addr));
+	      new_addr = scratch;
+	    }
+	}
+
       /* Make sure the register class can handle offset addresses.  */
       else if (rs6000_legitimate_offset_address_p (mode, addr, false, true))
 	{
@@ -19131,6 +19379,13 @@ rs6000_secondary_reload_inner (rtx reg, rtx mem, rtx scratch, bool store_p)
 	    }
 	}
 
+      /* Quad offsets are restricted and can't handle normal addresses.  */
+      else if (mode_supports_vsx_dform_quad (mode))
+	{
+	  emit_insn (gen_rtx_SET (scratch, addr));
+	  new_addr = scratch;
+	}
+
       /* Make sure the register class can handle offset addresses.  */
       else if (legitimate_lo_sum_address_p (mode, addr, false))
 	{
@@ -19351,7 +19606,8 @@ rs6000_preferred_reload_class (rtx x, enum reg_class rclass)
 	}
 
       /* D-form addressing can easily reload the value.  */
-      if (mode_supports_vmx_dform (mode))
+      if (mode_supports_vmx_dform (mode)
+	  || mode_supports_vsx_dform_quad (mode))
 	return rclass;
 
       /* If this is a scalar floating point value and we don't have D-form
@@ -19786,8 +20042,16 @@ rs6000_output_move_128bit (rtx operands[])
 
       else if (TARGET_VSX && dest_vsx_p)
 	{
-	  if (mode == V16QImode || mode == V8HImode || mode == V4SImode)
+	  if (mode_supports_vsx_dform_quad (mode)
+	      && quad_address_p (XEXP (src, 0), mode, false))
+	    return "lxv %x0,%1";
+
+	  else if (TARGET_P9_VECTOR)
+	    return "lxvx %x0,%y1";
+
+	  else if (mode == V16QImode || mode == V8HImode || mode == V4SImode)
 	    return "lxvw4x %x0,%y1";
+
 	  else
 	    return "lxvd2x %x0,%y1";
 	}
@@ -19816,8 +20080,16 @@ rs6000_output_move_128bit (rtx operands[])
 
       else if (TARGET_VSX && src_vsx_p)
 	{
-	  if (mode == V16QImode || mode == V8HImode || mode == V4SImode)
+	  if (mode_supports_vsx_dform_quad (mode)
+	      && quad_address_p (XEXP (dest, 0), mode, false))
+	    return "stxv %x1,%0";
+
+	  else if (TARGET_P9_VECTOR)
+	    return "stxvx %x1,%y0";
+
+	  else if (mode == V16QImode || mode == V8HImode || mode == V4SImode)
 	    return "stxvw4x %x1,%y0";
+
 	  else
 	    return "stxvd2x %x1,%y0";
 	}
@@ -26236,25 +26508,37 @@ rs6000_emit_prologue (void)
 	if (info->vrsave_mask & ALTIVEC_REG_BIT (i))
 	  {
 	    rtx areg, savereg, mem;
-	    int offset;
+	    HOST_WIDE_INT offset;
 
 	    offset = (info->altivec_save_offset + frame_off
 		      + 16 * (i - info->first_altivec_reg_save));
 
 	    savereg = gen_rtx_REG (V4SImode, i);
 
-	    NOT_INUSE (0);
-	    areg = gen_rtx_REG (Pmode, 0);
-	    emit_move_insn (areg, GEN_INT (offset));
-
-	    /* AltiVec addressing mode is [reg+reg].  */
-	    mem = gen_frame_mem (V4SImode,
-				 gen_rtx_PLUS (Pmode, frame_reg_rtx, areg));
+	    if (TARGET_P9_DFORM_VECTOR && quad_address_offset_p (offset))
+	      {
+		mem = gen_frame_mem (V4SImode,
+				     gen_rtx_PLUS (Pmode, frame_reg_rtx,
+						   GEN_INT (offset)));
+		insn = emit_insn (gen_rtx_SET (mem, savereg));
+		areg = NULL_RTX;
+	      }
+	    else
+	      {
+		NOT_INUSE (0);
+		areg = gen_rtx_REG (Pmode, 0);
+		emit_move_insn (areg, GEN_INT (offset));
 
-	    /* Rather than emitting a generic move, force use of the stvx
-	       instruction, which we always want.  In particular we don't
-	       want xxpermdi/stxvd2x for little endian.  */
-	    insn = emit_insn (gen_altivec_stvx_v4si_internal (mem, savereg));
+		/* AltiVec addressing mode is [reg+reg].  */
+		mem = gen_frame_mem (V4SImode,
+				     gen_rtx_PLUS (Pmode, frame_reg_rtx, areg));
+
+		/* Rather than emitting a generic move, force use of the stvx
+		   instruction, which we always want on ISA 2.07 (power8) systems.
+		   In particular we don't want xxpermdi/stxvd2x for little
+		   endian.  */
+		insn = emit_insn (gen_altivec_stvx_v4si_internal (mem, savereg));
+	      }
 
 	    rs6000_frame_related (insn, frame_reg_rtx, sp_off - frame_off,
 				  areg, GEN_INT (offset));
@@ -26974,23 +27258,35 @@ rs6000_emit_epilogue (int sibcall)
 	  for (i = info->first_altivec_reg_save; i <= LAST_ALTIVEC_REGNO; ++i)
 	    if (info->vrsave_mask & ALTIVEC_REG_BIT (i))
 	      {
-		rtx addr, areg, mem, reg;
+		rtx addr, areg, mem, insn;
+		rtx reg = gen_rtx_REG (V4SImode, i);
+		HOST_WIDE_INT offset
+		  = (info->altivec_save_offset + frame_off
+		     + 16 * (i - info->first_altivec_reg_save));
 
-		areg = gen_rtx_REG (Pmode, 0);
-		emit_move_insn
-		  (areg, GEN_INT (info->altivec_save_offset
-				  + frame_off
-				  + 16 * (i - info->first_altivec_reg_save)));
+		if (TARGET_P9_DFORM_VECTOR && quad_address_offset_p (offset))
+		  {
+		    mem = gen_frame_mem (V4SImode,
+					 gen_rtx_PLUS (Pmode, frame_reg_rtx,
+						       GEN_INT (offset)));
+		    insn = gen_rtx_SET (reg, mem);
+		  }
+		else
+		  {
+		    areg = gen_rtx_REG (Pmode, 0);
+		    emit_move_insn (areg, GEN_INT (offset));
 
-		/* AltiVec addressing mode is [reg+reg].  */
-		addr = gen_rtx_PLUS (Pmode, frame_reg_rtx, areg);
-		mem = gen_frame_mem (V4SImode, addr);
-
-		reg = gen_rtx_REG (V4SImode, i);
-		/* Rather than emitting a generic move, force use of the
-		   lvx instruction, which we always want.  In particular
-		   we don't want lxvd2x/xxpermdi for little endian.  */
-		(void) emit_insn (gen_altivec_lvx_v4si_internal (reg, mem));
+		    /* AltiVec addressing mode is [reg+reg].  */
+		    addr = gen_rtx_PLUS (Pmode, frame_reg_rtx, areg);
+		    mem = gen_frame_mem (V4SImode, addr);
+
+		    /* Rather than emitting a generic move, force use of the
+		       lvx instruction, which we always want.  In particular we
+		       don't want lxvd2x/xxpermdi for little endian.  */
+		    insn = gen_altivec_lvx_v4si_internal (reg, mem);
+		  }
+
+		(void) emit_insn (insn);
 	      }
 	}
 
@@ -27177,23 +27473,35 @@ rs6000_emit_epilogue (int sibcall)
 	  for (i = info->first_altivec_reg_save; i <= LAST_ALTIVEC_REGNO; ++i)
 	    if (info->vrsave_mask & ALTIVEC_REG_BIT (i))
 	      {
-		rtx addr, areg, mem, reg;
+		rtx addr, areg, mem, insn;
+		rtx reg = gen_rtx_REG (V4SImode, i);
+		HOST_WIDE_INT offset
+		  = (info->altivec_save_offset + frame_off
+		     + 16 * (i - info->first_altivec_reg_save));
 
-		areg = gen_rtx_REG (Pmode, 0);
-		emit_move_insn
-		  (areg, GEN_INT (info->altivec_save_offset
-				  + frame_off
-				  + 16 * (i - info->first_altivec_reg_save)));
+		if (TARGET_P9_DFORM_VECTOR && quad_address_offset_p (offset))
+		  {
+		    mem = gen_frame_mem (V4SImode,
+					 gen_rtx_PLUS (Pmode, frame_reg_rtx,
+						       GEN_INT (offset)));
+		    insn = gen_rtx_SET (reg, mem);
+		  }
+		else
+		  {
+		    areg = gen_rtx_REG (Pmode, 0);
+		    emit_move_insn (areg, GEN_INT (offset));
 
-		/* AltiVec addressing mode is [reg+reg].  */
-		addr = gen_rtx_PLUS (Pmode, frame_reg_rtx, areg);
-		mem = gen_frame_mem (V4SImode, addr);
-
-		reg = gen_rtx_REG (V4SImode, i);
-		/* Rather than emitting a generic move, force use of the
-		   lvx instruction, which we always want.  In particular
-		   we don't want lxvd2x/xxpermdi for little endian.  */
-		(void) emit_insn (gen_altivec_lvx_v4si_internal (reg, mem));
+		    /* AltiVec addressing mode is [reg+reg].  */
+		    addr = gen_rtx_PLUS (Pmode, frame_reg_rtx, areg);
+		    mem = gen_frame_mem (V4SImode, addr);
+
+		    /* Rather than emitting a generic move, force use of the
+		       lvx instruction, which we always want.  In particular we
+		       don't want lxvd2x/xxpermdi for little endian.  */
+		    insn = gen_altivec_lvx_v4si_internal (reg, mem);
+		  }
+
+		(void) emit_insn (insn);
 	      }
 	}
 
@@ -34365,7 +34673,7 @@ rs6000_libcall_value (machine_mode mode)
 static bool
 rs6000_lra_p (void)
 {
-  return rs6000_lra_flag;
+  return TARGET_LRA;
 }
 
 /* Given FROM and TO register numbers, say whether this elimination is allowed.
@@ -34726,7 +35034,8 @@ static struct rs6000_opt_mask const rs6000_opt_masks[] =
   { "power8-fusion",		OPTION_MASK_P8_FUSION,		false, true  },
   { "power8-fusion-sign",	OPTION_MASK_P8_FUSION_SIGN,	false, true  },
   { "power8-vector",		OPTION_MASK_P8_VECTOR,		false, true  },
-  { "power9-dform",		OPTION_MASK_P9_DFORM,		false, true  },
+  { "power9-dform-scalar",	OPTION_MASK_P9_DFORM_SCALAR,	false, true  },
+  { "power9-dform-vector",	OPTION_MASK_P9_DFORM_VECTOR,	false, true  },
   { "power9-fusion",		OPTION_MASK_P9_FUSION,		false, true  },
   { "power9-minmax",		OPTION_MASK_P9_MINMAX,		false, true  },
   { "power9-vector",		OPTION_MASK_P9_VECTOR,		false, true  },
@@ -35359,7 +35668,9 @@ rs6000_print_options_internal (FILE *file,
   size_t i;
   size_t start_column = 0;
   size_t cur_column;
-  size_t max_column = 76;
+  size_t max_column = 120;
+  size_t prefix_len = strlen (prefix);
+  size_t comma_len = 0;
   const char *comma = "";
 
   if (indent)
@@ -35377,27 +35688,45 @@ rs6000_print_options_internal (FILE *file,
   cur_column = start_column;
   for (i = 0; i < num_elements; i++)
     {
-      if ((flags & opts[i].mask) != 0)
+      bool invert = opts[i].invert;
+      const char *name = opts[i].name;
+      const char *no_str = "";
+      HOST_WIDE_INT mask = opts[i].mask;
+      size_t len = comma_len + prefix_len + strlen (name);
+
+      if (!invert)
 	{
-	  const char *no_str = rs6000_opt_masks[i].invert ? "no-" : "";
-	  size_t len = (strlen (comma)
-			+ strlen (prefix)
-			+ strlen (no_str)
-			+ strlen (rs6000_opt_masks[i].name));
+	  if ((flags & mask) == 0)
+	    {
+	      no_str = "no-";
+	      len += sizeof ("no-") - 1;
+	    }
 
-	  cur_column += len;
-	  if (cur_column > max_column)
+	  flags &= ~mask;
+	}
+
+      else
+	{
+	  if ((flags & mask) != 0)
 	    {
-	      fprintf (stderr, ", \\\n%*s", (int)start_column, "");
-	      cur_column = start_column + len;
-	      comma = "";
+	      no_str = "no-";
+	      len += sizeof ("no-") - 1;
 	    }
 
-	  fprintf (file, "%s%s%s%s", comma, prefix, no_str,
-		   rs6000_opt_masks[i].name);
-	  flags &= ~ opts[i].mask;
-	  comma = ", ";
+	  flags |= mask;
 	}
+
+      cur_column += len;
+      if (cur_column > max_column)
+	{
+	  fprintf (stderr, ", \\\n%*s", (int)start_column, "");
+	  cur_column = start_column + len;
+	  comma = "";
+	}
+
+      fprintf (file, "%s%s%s%s", comma, prefix, no_str, name);
+      comma = ", ";
+      comma_len = sizeof (", ") - 1;
     }
 
   fputs ("\n", file);
-- 
cgit v1.2.1