From 4a12b13939954ec16e21fcdb1b911f17d0ff5bab Mon Sep 17 00:00:00 2001 From: Dave Smith Date: Mon, 14 Jun 2010 18:16:26 -0600 Subject: Refactor of overlay support in reltool extension; adding support for templating overlay files --HG-- extra : rebase_source : f042bd65d63dbaf4177f444f66033883bf7522a5 --- src/rebar_reltool.erl | 265 +++++++++++++++++++++++++++++--------------------- 1 file changed, 155 insertions(+), 110 deletions(-) (limited to 'src/rebar_reltool.erl') diff --git a/src/rebar_reltool.erl b/src/rebar_reltool.erl index 960166c..c161e7a 100644 --- a/src/rebar_reltool.erl +++ b/src/rebar_reltool.erl @@ -49,7 +49,7 @@ generate(Config, ReltoolFile) -> validate_rel_apps(Server, sys_tuple(ReltoolConfig)), %% Finally, run reltool - case catch(run_reltool(Config, ReltoolConfig)) of + case catch(run_reltool(Server, Config, ReltoolConfig)) of ok -> ok; {error, failed} -> @@ -60,9 +60,9 @@ generate(Config, ReltoolFile) -> end. -clean(Config, ReltoolFile) -> +clean(_Config, ReltoolFile) -> ReltoolConfig = load_config(ReltoolFile), - TargetDir = target_dir(Config, sys_tuple(ReltoolConfig)), + TargetDir = target_dir(ReltoolConfig), rebar_file_utils:rm_rf(TargetDir), rebar_file_utils:delete_each(["reltool.spec"]). @@ -72,43 +72,65 @@ clean(Config, ReltoolFile) -> %% Internal functions %% =================================================================== +%% +%% Load terms from reltool.config +%% +load_config(ReltoolFile) -> + case file:consult(ReltoolFile) of + {ok, Terms} -> + Terms; + Other -> + ?ABORT("Failed to load expected config from ~s: ~p\n", [ReltoolFile, Other]) + end. + +%% +%% Look for the {sys, [...]} tuple in the reltool.config file. Without this present, we +%% can't run reltool. +%% sys_tuple(ReltoolConfig) -> case lists:keysearch(sys, 1, ReltoolConfig) of {value, {sys, Data}} -> {sys, Data}; false -> - ?ERROR("Failed to find {sys, ...} tuple in reltool.config.", []), - ?FAIL + ?ABORT("Failed to find {sys, [...]} tuple in reltool.config.", []) end. -load_config(ReltoolFile) -> - %% Load the reltool configuration from the file - case file:consult(ReltoolFile) of - {ok, Terms} -> - Terms; - Other -> - ?ERROR("Failed to load expected config from ~s: ~p\n", [ReltoolFile, Other]), - ?FAIL +%% +%% Look for {target_dir, TargetDir} in the reltool config file; if none is +%% found, use the name of the release as the default target directory. +%% +target_dir(ReltoolConfig) -> + case lists:keysearch(target_dir, 1, ReltoolConfig) of + {value, {target_dir, TargetDir}} -> + filename:absname(TargetDir); + false -> + {sys, SysInfo} = sys_tuple(ReltoolConfig), + case lists:keysearch(rel, 1, SysInfo) of + {value, {rel, Name, _Vsn, _Apps}} -> + filename:absname(Name); + false -> + filename:absname("target") + end end. - %% -%% Determine the name of the target directory; try the user provided name -%% first, or fall back to the release name if that's available. If neither -%% is available, just use "target" +%% Look for overlay_vars file reference. The user can override this from the +%% command line (i.e. globals), so we check there first and then fall back to +%% what is present in the reltool.config file %% -target_dir(Config, {sys, ReltoolConfig}) -> - case rebar_config:get(Config, target_name, undefined) of - undefined -> - case lists:keysearch(rel, 1, ReltoolConfig) of - {value, {rel, Name, _Vsn, _Apps}} -> - Name; - false -> - "target" - end; - Name -> - Name - end. +overlay_vars(ReltoolConfig) -> + case rebar_config:get_global(overlay_vars, undefined) of + undefined -> + case lists:keysearch(overlay_vars, 1, ReltoolConfig) of + {value, {overlay_vars, File}} -> + File; + false -> + undefined + end; + File -> + File + end. + validate_rel_apps(ReltoolServer, {sys, ReltoolConfig}) -> case lists:keysearch(rel, 1, ReltoolConfig) of @@ -121,13 +143,11 @@ validate_rel_apps(ReltoolServer, {sys, ReltoolConfig}) -> [] -> ok; _ -> - ?ERROR("Apps in {rel, ...} section not found by reltool: ~p\n", [Missing]), - ?FAIL + ?ABORT("Apps in {rel, ...} section not found by reltool: ~p\n", [Missing]) end; {value, Rel} -> %% Invalid release format! - ?ERROR("Invalid {rel, ...} section in reltools.config: ~p\n", [Rel]), - ?FAIL; + ?ABORT("Invalid {rel, ...} section in reltools.config: ~p\n", [Rel]); false -> ok end. @@ -143,33 +163,53 @@ app_exists(AppTuple, Server) when is_tuple(AppTuple) -> app_exists(element(1, AppTuple), Server). -run_reltool(Config, ReltoolConfig) -> - {ok, Server} = reltool:start_server([sys_tuple(ReltoolConfig)]), +run_reltool(Server, Config, ReltoolConfig) -> case reltool:get_target_spec(Server) of {ok, Spec} -> - TargetDir = target_dir(Config, sys_tuple(ReltoolConfig)), + %% Pull the target dir and make sure it exists + TargetDir = target_dir(ReltoolConfig), mk_target_dir(TargetDir), - %% Post process the specification with rebar directives (if any exist) - FinalSpec = case lists:keysearch(rebar, 1, ReltoolConfig) of - {value, {rebar, RebarConfig}} -> - process_rebar_specs(RebarConfig, Spec); - false -> - Spec - end, + %% Dump the spec, if necessary + dump_spec(Spec), - dump_spec(FinalSpec), - - case reltool:eval_target_spec(FinalSpec, code:root_dir(), TargetDir) of + %% Have reltool actually run + case reltool:eval_target_spec(Spec, code:root_dir(), TargetDir) of ok -> ok; {error, Reason} -> - ?ERROR("Failed to generate target from spec: ~p\n", [Reason]), - ?FAIL + ?ABORT("Failed to generate target from spec: ~p\n", [Reason]) + end, + + %% Initialize overlay vars with some basics (that can get overwritten) + OverlayVars0 = [{erts_vsn, "erts-" ++ erlang:system_info(version)}], + + %% Load up any variables specified by overlay_vars + OverlayVars = case overlay_vars(ReltoolConfig) of + undefined -> + dict:new(OverlayVars0); + File -> + case file:consult(File) of + {ok, Terms} -> + dict:from_list(OverlayVars0 ++ Terms); + {error, Reason2} -> + ?ABORT("Unable to load overlay_vars from ~s: ~p\n", + [File, Reason2]) + end + end, + + %% Finally, overlay the files specified by the overlay section + case lists:keysearch(overlay, 1, ReltoolConfig) of + {value, {overlay, Overlay}} when is_list(Overlay) -> + execute_overlay(Overlay, OverlayVars, rebar_utils:get_cwd(), TargetDir); + {value, _} -> + ?ABORT("{overlay, [...]} entry in reltool.config must be a list.\n", []); + false -> + ?INFO("No {overlay, [...]} found in reltool.config.\n", []) end; + {error, Reason} -> - ?ERROR("Unable to generate spec: ~s\n", [Reason]), - ?FAIL + ?ABORT("Unable to generate spec: ~s\n", [Reason]) end. @@ -199,67 +239,72 @@ dump_spec(Spec) -> ok end. -process_rebar_specs([], Spec) -> - Spec; -process_rebar_specs([{overlay, Source} | Rest], Spec) -> - case file:list_dir(Source) of - {ok, Files} -> - OverlaySpec = spec_copy_overlay(Files, Source, []), - process_rebar_specs(Rest, Spec ++ OverlaySpec); + +execute_overlay([], _Vars, _BaseDir, _TargetDir) -> + ok; +execute_overlay([{mkdir, Out} | Rest], Vars, BaseDir, TargetDir) -> + OutFile = render(filename:join([TargetDir, Out, "dummy"]), Vars), + filelib:ensure_dir(OutFile), + ?DEBUG("Created dir ~s\n", [filename:dirname(OutFile)]), + execute_overlay(Rest, Vars, BaseDir, TargetDir); +execute_overlay([{copy, In} | Rest], _Vars, BaseDir, TargetDir) -> + execute_overlay([{copy, In, ""} | Rest], _Vars, BaseDir, TargetDir); +execute_overlay([{copy, In, Out} | Rest], Vars, BaseDir, TargetDir) -> + InFile = render(filename:join(BaseDir, In), Vars), + OutFile = render(filename:join(TargetDir, Out), Vars), + case filelib:is_dir(InFile) of + true -> + ok; + false -> + ok = filelib:ensure_dir(OutFile) + end, + rebar_utils:sh(?FMT("cp -R ~p ~p", [InFile, OutFile])), + execute_overlay(Rest, Vars, BaseDir, TargetDir); +execute_overlay([{template, In, Out} | Rest], Vars, BaseDir, TargetDir) -> + {ok, InFileData} = file:read_file(render(filename:join(BaseDir, In), Vars)), + OutFile = render(filename:join(TargetDir, Out), Vars), + ok = filelib:ensure_dir(OutFile), + case file:write_file(OutFile, render(InFileData, Vars)) of + ok -> + ?DEBUG("Templated ~p\n", [OutFile]), + execute_overlay(Rest, Vars, BaseDir, TargetDir); {error, Reason} -> - ?ERROR("Failed to list overlay directory ~p: ~p\n", [Source, Reason]), - ?FAIL + ?ABORT("Failed to template ~p: ~p\n", [OutFile, Reason]) end; -process_rebar_specs([{empty_dirs, Dirs} | Rest], Spec) -> - Spec2 = lists:foldl(fun(Dir, SpecAcc) -> - spec_create_dir(filename:split(Dir), SpecAcc) - end, Spec, Dirs), - process_rebar_specs(Rest, Spec2); -process_rebar_specs([ Other | Rest], Spec) -> - ?WARN("Ignoring unknown rebar spec: ~p\n", [Other]), - process_rebar_specs(Rest, Spec). - - -spec_create_dir([], Spec) -> - Spec; -spec_create_dir([Path | Rest], Spec) -> - case lists:keysearch(Path, 2, Spec) of - {value, {create_dir, Path, Subspec}} -> - %% Directory already exists; process down into - %% Note: this is not tail recursive, but unless the directory structure - %% is insanely deep, shouldn't be a problem - lists:keystore(Path, 2, Spec, {create_dir, Path, spec_create_dir(Rest, Subspec)}); - {value, Other} -> - %% Collision -- something other than create_dir is associated with this - %% portion of our path name. - ?ERROR("Collision of path name with existing tuple in spec: ~p\n", [Other]), - ?FAIL; - false -> - %% Directory doesn't yet exist - [{create_dir, Path, spec_create_dir(Rest, [])} | Spec] - end. +execute_overlay([{create, Out, Contents} | Rest], Vars, BaseDir, TargetDir) -> + OutFile = render(filename:join(TargetDir, Out), Vars), + ok = filelib:ensure_dir(OutFile), + case file:write_file(OutFile, Contents) of + ok -> + ?DEBUG("Created ~p\n", [OutFile]), + execute_overlay(Rest, Vars, BaseDir, TargetDir); + {error, Reason} -> + ?ABORT("Failed to create ~p: ~p\n", [OutFile, Reason]) + end; +execute_overlay([{replace, Out, Regex, Replacement} | Rest], + Vars, BaseDir, TargetDir) -> + execute_overlay([{replace, Out, Regex, Replacement, []} | Rest], Vars, BaseDir, TargetDir); +execute_overlay([{replace, Out, Regex, Replacement, Opts} | Rest], + Vars, BaseDir, TargetDir) -> + Filename = render(filename:join(TargetDir, Out), Vars), + {ok, OrigData} = file:read_file(Filename), + Data = re:replace(OrigData, Regex, Replacement, [global, {return, binary}] ++ Opts), + case file:write_file(Filename, Data) of + ok -> + ?DEBUG("Edited ~s: s/~s/~s/\n", [Filename, Regex, Replacement]), + execute_overlay(Rest, Vars, BaseDir, TargetDir); + {error, Reason} -> + ?ABORT("Failed to edit ~p: ~p\n", [Filename, Reason]) + end; +execute_overlay([Other | _Rest], _Vars, _BaseDir, _TargetDir) -> + {error, {unsupported_operation, Other}}. -spec_copy_overlay([], _Dir, Acc) -> - lists:reverse(Acc); -spec_copy_overlay([F | Rest], Dir, Acc) -> - Filename = filename:join(Dir, F), - {ok, Info} = file:read_file_info(Filename), - case Info#file_info.type of - directory -> - %% If this directory has the special name of "erts-vsn", we are going to replace "vsn" with the - %% actual erts vsn for the output directory name - case filename:basename(Filename) of - "erts-vsn" -> OutDir = "erts-" ++ erlang:system_info(version); - OutDir -> ok - end, - {ok, Files} = file:list_dir(Filename), - Entry = {create_dir, OutDir, spec_copy_overlay(Files, Filename, [])}, - spec_copy_overlay(Rest, Dir, [Entry | Acc]); - regular -> - Entry = {copy_file, filename:basename(F), filename:absname(Filename)}, - spec_copy_overlay(Rest, Dir, [Entry | Acc]); - Other -> - ?DEBUG("Skipping ~p of type ~p\n", [F, Other]), - spec_copy_overlay(Rest, Dir, Acc) - end. + +%% +%% Render a binary to a string, using mustache and the specified context +%% +render(Bin, Context) -> + %% Be sure to escape any double-quotes before rendering... + Str = re:replace(Bin, "\"", "\\\\\"", [global, {return,list}]), + mustache:render(Str, Context). -- cgit v1.2.1