From b22e5ea8ef609577dd48502897aa5d4fb49655fe Mon Sep 17 00:00:00 2001 From: "Robert J. Chassell" Date: Mon, 21 Aug 2006 14:22:22 +0000 Subject: * lispintro/texinfo.tex: changed to version 2006-02-13.16 to enable a DVI build using the more recent versions of TeX. --- lispintro/texinfo.tex | 6161 ++++++++++++++++++++++++++----------------------- 1 file changed, 3305 insertions(+), 2856 deletions(-) (limited to 'lispintro') diff --git a/lispintro/texinfo.tex b/lispintro/texinfo.tex index e960fb32992..dddd0140ff0 100644 --- a/lispintro/texinfo.tex +++ b/lispintro/texinfo.tex @@ -3,10 +3,11 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2003-12-30.09} +\def\texinfoversion{2006-02-13.16} % % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, -% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free +% Software Foundation, Inc. % % This texinfo.tex file is free software; you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -23,21 +24,16 @@ % to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, % Boston, MA 02110-1301, USA. % -% In other words, you are welcome to use, share and improve this program. -% You are forbidden to forbid anyone else to use, share and improve -% what you give them. Help stamp out software-hoarding! +% As a special exception, when this file is read by TeX when processing +% a Texinfo source document, you may use the result without +% restriction. (This has been our intent since Texinfo was invented.) % % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: -% ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex -% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) +% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or % ftp://tug.org/tex/texinfo.tex -% (and all CTAN mirrors, see http://www.ctan.org), -% and /home/gd/gnu/doc/texinfo.tex on the GNU machines. -% -% The GNU Texinfo home page is http://www.gnu.org/software/texinfo. -% -% The texinfo.tex in any given Texinfo distribution could well be out +% (and all CTAN mirrors, see http://www.ctan.org). +% The texinfo.tex in any given distribution could well be out % of date, so if that's what you're using, please check. % % Send bug reports to bug-texinfo@gnu.org. Please include including a @@ -59,6 +55,9 @@ % It is possible to adapt texinfo.tex for other languages, to some % extent. You can get the existing language-specific files from the % full Texinfo distribution. +% +% The GNU Texinfo home page is http://www.gnu.org/software/texinfo. + \message{Loading texinfo [version \texinfoversion]:} @@ -85,12 +84,16 @@ \let\ptexend=\end \let\ptexequiv=\equiv \let\ptexexclam=\! +\let\ptexfootnote=\footnote \let\ptexgtr=> \let\ptexhat=^ \let\ptexi=\i \let\ptexindent=\indent +\let\ptexinsert=\insert \let\ptexlbrace=\{ \let\ptexless=< +\let\ptexnewwrite\newwrite +\let\ptexnoindent=\noindent \let\ptexplus=+ \let\ptexrbrace=\} \let\ptexslash=\/ @@ -101,6 +104,15 @@ % starts a new line in the output. \newlinechar = `^^J +% Use TeX 3.0's \inputlineno to get the line number, for better error +% messages, but if we're using an old version of TeX, don't do anything. +% +\ifx\inputlineno\thisisundefined + \let\linenumber = \empty % Pre-3.0. +\else + \def\linenumber{l.\the\inputlineno:\space} +\fi + % Set up fixed words for English if not already set. \ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi @@ -139,43 +151,71 @@ \ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi \ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi \ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi -\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi \ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi -\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi -% In some macros, we cannot use the `\? notation---the left quote is -% in some cases the escape char. -\chardef\colonChar = `\: -\chardef\commaChar = `\, -\chardef\dotChar = `\. -\chardef\equalChar = `\= -\chardef\exclamChar= `\! -\chardef\questChar = `\? -\chardef\semiChar = `\; -\chardef\spaceChar = `\ % -\chardef\underChar = `\_ +% Since the category of space is not known, we have to be careful. +\chardef\spacecat = 10 +\def\spaceisspace{\catcode`\ =\spacecat} % Ignore a token. % \def\gobble#1{} -% True if #1 is the empty string, i.e., called like `\ifempty{}'. -% -\def\ifempty#1{\ifemptyx #1\emptymarkA\emptymarkB}% -\def\ifemptyx#1#2\emptymarkB{\ifx #1\emptymarkA}% +% The following is used inside several \edef's. +\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} % Hyphenation fixes. -\hyphenation{ap-pen-dix} -\hyphenation{eshell} -\hyphenation{mini-buf-fer mini-buf-fers} -\hyphenation{time-stamp} -\hyphenation{white-space} +\hyphenation{ + Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script + ap-pen-dix bit-map bit-maps + data-base data-bases eshell fall-ing half-way long-est man-u-script + man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm + par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces + spell-ing spell-ings + stand-alone strong-est time-stamp time-stamps which-ever white-space + wide-spread wrap-around +} % Margin to add to right of even pages, to left of odd pages. \newdimen\bindingoffset \newdimen\normaloffset \newdimen\pagewidth \newdimen\pageheight +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). +% +\def\finalout{\overfullrule=0pt} + +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + % Sometimes it is convenient to have everything in the transcript file % and nothing on the terminal. We don't just call \tracingall here, % since that produces some useless output on the terminal. We also make @@ -200,7 +240,7 @@ \tracingassigns1 \fi \tracingcommands3 % 3 gives us more in etex - \errorcontextlines\maxdimen + \errorcontextlines16 }% % add check for \lastpenalty to plain's definitions. If the last thing @@ -252,13 +292,17 @@ % take effect in \write's, yet the group defined by the \vbox ends % before the \shipout runs. % - \escapechar = `\\ % use backslash in output files. \indexdummies % don't expand commands in the output. \normalturnoffactive % \ in index entries must not stay \, e.g., if - % the page break happens to be in the middle of an example. + % the page break happens to be in the middle of an example. + % We don't want .vr (or whatever) entries like this: + % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} + % "\acronym" won't work when it's read back in; + % it needs to be + % {\code {{\tt \backslashcurfont }acronym} \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. - \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi + \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi % \ifcropmarks \vbox to \outervsize\bgroup \hsize = \outerhsize @@ -306,7 +350,7 @@ \egroup % \vbox from first cropmarks clause \fi }% end of \shipout\vbox - }% end of group with \normalturnoffactive + }% end of group with \indexdummies \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi } @@ -339,132 +383,162 @@ % the input line (except we remove a trailing comment). #1 should be a % macro which expects an ordinary undelimited TeX argument. % -\def\parsearg#1{% - \let\next = #1% +\def\parsearg{\parseargusing{}} +\def\parseargusing#1#2{% + \def\next{#2}% \begingroup \obeylines - \futurelet\temp\parseargx -} - -% If the next token is an obeyed space (from an @example environment or -% the like), remove it and recurse. Otherwise, we're done. -\def\parseargx{% - % \obeyedspace is defined far below, after the definition of \sepspaces. - \ifx\obeyedspace\temp - \expandafter\parseargdiscardspace - \else - \expandafter\parseargline - \fi + \spaceisspace + #1% + \parseargline\empty% Insert the \empty token, see \finishparsearg below. } -% Remove a single space (as the delimiter token to the macro call). -{\obeyspaces % - \gdef\parseargdiscardspace {\futurelet\temp\parseargx}} - {\obeylines % \gdef\parseargline#1^^M{% \endgroup % End of the group started in \parsearg. - % - % First remove any @c comment, then any @comment. - % Result of each macro is put in \toks0. - \argremovec #1\c\relax % - \expandafter\argremovecomment \the\toks0 \comment\relax % - % - % Call the caller's macro, saved as \next in \parsearg. - \expandafter\next\expandafter{\the\toks0}% + \argremovecomment #1\comment\ArgTerm% }% } -% Since all \c{,omment} does is throw away the argument, we can let TeX -% do that for us. The \relax here is matched by the \relax in the call -% in \parseargline; it could be more or less anything, its purpose is -% just to delimit the argument to the \c. -\def\argremovec#1\c#2\relax{\toks0 = {#1}} -\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}} +% First remove any @comment, then any @c comment. +\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} +\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} -% \argremovec{,omment} might leave us with trailing spaces, though; e.g., +% Each occurence of `\^^M' or `\^^M' is replaced by a single space. +% +% \argremovec might leave us with trailing space, e.g., % @end itemize @c foo -% will have two active spaces as part of the argument with the -% `itemize'. Here we remove all active spaces from #1, and assign the -% result to \toks0. -% -% This loses if there are any *other* active characters besides spaces -% in the argument -- _ ^ +, for example -- since they get expanded. -% Fortunately, Texinfo does not define any such commands. (If it ever -% does, the catcode of the characters in questionwill have to be changed -% here.) But this means we cannot call \removeactivespaces as part of -% \argremovec{,omment}, since @c uses \parsearg, and thus the argument -% that \parsearg gets might well have any character at all in it. -% -\def\removeactivespaces#1{% - \begingroup - \ignoreactivespaces - \edef\temp{#1}% - \global\toks0 = \expandafter{\temp}% - \endgroup +% This space token undergoes the same procedure and is eventually removed +% by \finishparsearg. +% +\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} +\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} +\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% + \def\temp{#3}% + \ifx\temp\empty + % We cannot use \next here, as it holds the macro to run; + % thus we reuse \temp. + \let\temp\finishparsearg + \else + \let\temp\argcheckspaces + \fi + % Put the space token in: + \temp#1 #3\ArgTerm } -% Change the active space to expand to nothing. +% If a _delimited_ argument is enclosed in braces, they get stripped; so +% to get _exactly_ the rest of the line, we had to prevent such situation. +% We prepended an \empty token at the very beginning and we expand it now, +% just before passing the control to \next. +% (Similarily, we have to think about #3 of \argcheckspacesY above: it is +% either the null string, or it ends with \^^M---thus there is no danger +% that a pair of braces would be stripped. % -\begingroup +% But first, we have to remove the trailing space token. +% +\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}} + +% \parseargdef\foo{...} +% is roughly equivalent to +% \def\foo{\parsearg\Xfoo} +% \def\Xfoo#1{...} +% +% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my +% favourite TeX trick. --kasal, 16nov03 + +\def\parseargdef#1{% + \expandafter \doparseargdef \csname\string#1\endcsname #1% +} +\def\doparseargdef#1#2{% + \def#2{\parsearg#1}% + \def#1##1% +} + +% Several utility definitions with active space: +{ \obeyspaces - \gdef\ignoreactivespaces{\obeyspaces\let =\empty} -\endgroup + \gdef\obeyedspace{ } + + % Make each space character in the input produce a normal interword + % space in the output. Don't allow a line break at this space, as this + % is used only in environments like @example, where each line of input + % should produce a line of output anyway. + % + \gdef\sepspaces{\obeyspaces\let =\tie} + + % If an index command is used in an @example environment, any spaces + % therein should become regular spaces in the raw index file, not the + % expansion of \tie (\leavevmode \penalty \@M \ ). + \gdef\unsepspaces{\let =\space} +} \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} -%% These are used to keep @begin/@end levels from running away -%% Call \inENV within environments (after a \begingroup) -\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} -\def\ENVcheck{% -\ifENV\errmessage{Still within an environment; press RETURN to continue} -\endgroup\fi} % This is not perfect, but it should reduce lossage +% Define the framework for environments in texinfo.tex. It's used like this: +% +% \envdef\foo{...} +% \def\Efoo{...} +% +% It's the responsibility of \envdef to insert \begingroup before the +% actual body; @end closes the group after calling \Efoo. \envdef also +% defines \thisenv, so the current environment is known; @end checks +% whether the environment name matches. The \checkenv macro can also be +% used to check whether the current environment is the one expected. +% +% Non-false conditionals (@iftex, @ifset) don't fit into this, so they +% are not treated as enviroments; they don't open a group. (The +% implementation of @end takes care not to call \endgroup in this +% special case.) -% @begin foo is the same as @foo, for now. -\newhelp\EMsimple{Press RETURN to continue.} -\outer\def\begin{\parsearg\beginxxx} +% At runtime, environments start with this: +\def\startenvironment#1{\begingroup\def\thisenv{#1}} +% initialize +\let\thisenv\empty -\def\beginxxx #1{% -\expandafter\ifx\csname #1\endcsname\relax -{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else -\csname #1\endcsname\fi} +% ... but they get defined via ``\envdef\foo{...}'': +\long\def\envdef#1#2{\def#1{\startenvironment#1#2}} +\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} -% @end foo executes the definition of \Efoo. -% -\def\end{\parsearg\endxxx} -\def\endxxx #1{% - \removeactivespaces{#1}% - \edef\endthing{\the\toks0}% - % - \expandafter\ifx\csname E\endthing\endcsname\relax - \expandafter\ifx\csname \endthing\endcsname\relax - % There's no \foo, i.e., no ``environment'' foo. - \errhelp = \EMsimple - \errmessage{Undefined command `@end \endthing'}% - \else - \unmatchedenderror\endthing - \fi +% Check whether we're in the right environment: +\def\checkenv#1{% + \def\temp{#1}% + \ifx\thisenv\temp \else - % Everything's ok; the right environment has been started. - \csname E\endthing\endcsname + \badenverr \fi } -% There is an environment #1, but it hasn't been started. Give an error. -% -\def\unmatchedenderror#1{% +% Evironment mismatch, #1 expected: +\def\badenverr{% \errhelp = \EMsimple - \errmessage{This `@end #1' doesn't have a matching `@#1'}% + \errmessage{This command can appear only \inenvironment\temp, + not \inenvironment\thisenv}% +} +\def\inenvironment#1{% + \ifx#1\empty + out of any environment% + \else + in environment \expandafter\string#1% + \fi } -% Define the control sequence \E#1 to give an unmatched @end error. +% @end foo executes the definition of \Efoo. +% But first, it executes a specialized version of \checkenv % -\def\defineunmatchedend#1{% - \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}% +\parseargdef\end{% + \if 1\csname iscond.#1\endcsname + \else + % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 + \expandafter\checkenv\csname#1\endcsname + \csname E#1\endcsname + \endgroup + \fi } +\newhelp\EMsimple{Press RETURN to continue.} + %% Simple single-character @ commands @@ -486,7 +560,7 @@ \let\}=\myrbrace \begingroup % Definitions to produce \{ and \} commands for indices, - % and @{ and @} for the aux file. + % and @{ and @} for the aux/toc files. \catcode`\{ = \other \catcode`\} = \other \catcode`\[ = 1 \catcode`\] = 2 \catcode`\! = 0 \catcode`\\ = \other @@ -496,6 +570,9 @@ !gdef!rbraceatcmd[@}]% !endgroup +% @comma{} to avoid , parsing problems. +\let\comma = , + % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent % Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. \let\, = \c @@ -505,10 +582,12 @@ \let\ubaraccent = \b \let\udotaccent = \d -% Other special characters: @questiondown @exclamdown +% Other special characters: @questiondown @exclamdown @ordf @ordm % Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. \def\questiondown{?`} \def\exclamdown{!`} +\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} +\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} % Dotless i and dotless j, used for accents. \def\imacro{i} @@ -521,6 +600,25 @@ \fi\fi } +% The \TeX{} logo, as in plain, but resetting the spacing so that a +% period following counts as ending a sentence. (Idea found in latex.) +% +\edef\TeX{\TeX \spacefactor=1000 } + +% @LaTeX{} logo. Not quite the same results as the definition in +% latex.ltx, since we use a different font for the raised A; it's most +% convenient for us to use an explicitly smaller font, rather than using +% the \scriptstyle font (since we don't reset \scriptstyle and +% \scriptscriptstyle). +% +\def\LaTeX{% + L\kern-.36em + {\setbox0=\hbox{T}% + \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% + \kern-.15em + \TeX +} + % Be sure we're in horizontal mode when doing a tie, since we make space % equivalent to this in @example-like environments. Otherwise, a space % at the beginning of a line will start with \penalty -- and @@ -543,13 +641,28 @@ \let\/=\allowbreak % @. is an end-of-sentence period. -\def\.{.\spacefactor=3000 } +\def\.{.\spacefactor=\endofsentencespacefactor\space} % @! is an end-of-sentence bang. -\def\!{!\spacefactor=3000 } +\def\!{!\spacefactor=\endofsentencespacefactor\space} % @? is an end-of-sentence query. -\def\?{?\spacefactor=3000 } +\def\?{?\spacefactor=\endofsentencespacefactor\space} + +% @frenchspacing on|off says whether to put extra space after punctuation. +% +\def\onword{on} +\def\offword{off} +% +\parseargdef\frenchspacing{% + \def\temp{#1}% + \ifx\temp\onword \plainfrenchspacing + \else\ifx\temp\offword \plainnonfrenchspacing + \else + \errhelp = \EMsimple + \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% + \fi\fi +} % @w prevents a word break. Without the \leavevmode, @w at the % beginning of a paragraph, when TeX is still in vertical mode, would @@ -574,59 +687,14 @@ \newbox\groupbox \def\vfilllimit{0.7} % -\def\group{\begingroup - \ifnum\catcode13=\active \else +\envdef\group{% + \ifnum\catcode`\^^M=\active \else \errhelp = \groupinvalidhelp \errmessage{@group invalid in context where filling is enabled}% \fi - % - % The \vtop we start below produces a box with normal height and large - % depth; thus, TeX puts \baselineskip glue before it, and (when the - % next line of text is done) \lineskip glue after it. (See p.82 of - % the TeXbook.) Thus, space below is not quite equal to space - % above. But it's pretty close. - \def\Egroup{% - \egroup % End the \vtop. - % \dimen0 is the vertical size of the group's box. - \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox - % \dimen2 is how much space is left on the page (more or less). - \dimen2 = \pageheight \advance\dimen2 by -\pagetotal - % if the group doesn't fit on the current page, and it's a big big - % group, force a page break. - \ifdim \dimen0 > \dimen2 - \ifdim \pagetotal < \vfilllimit\pageheight - \page - \fi - \fi - \copy\groupbox - \endgroup % End the \group. - }% + \startsavinginserts % \setbox\groupbox = \vtop\bgroup - % We have to put a strut on the last line in case the @group is in - % the midst of an example, rather than completely enclosing it. - % Otherwise, the interline space between the last line of the group - % and the first line afterwards is too small. But we can't put the - % strut in \Egroup, since there it would be on a line by itself. - % Hence this just inserts a strut at the beginning of each line. - \everypar = {\strut}% - % - % Since we have a strut on every line, we don't need any of TeX's - % normal interline spacing. - \offinterlineskip - % - % OK, but now we have to do something about blank - % lines in the input in @example-like environments, which normally - % just turn into \lisppar, which will insert no space now that we've - % turned off the interline space. Simplest is to make them be an - % empty paragraph. - \ifx\par\lisppar - \edef\par{\leavevmode \par}% - % - % Reset ^^M's definition to new definition of \par. - \obeylines - \fi - % % Do @comment since we are called inside an environment such as % @example, where each end-of-line in the input causes an % end-of-line in the output. We don't want the end-of-line after @@ -636,6 +704,32 @@ \comment } % +% The \vtop produces a box with normal height and large depth; thus, TeX puts +% \baselineskip glue before it, and (when the next line of text is done) +% \lineskip glue after it. Thus, space below is not quite equal to space +% above. But it's pretty close. +\def\Egroup{% + % To get correct interline space between the last line of the group + % and the first line afterwards, we have to propagate \prevdepth. + \endgraf % Not \par, as it may have been set to \lisppar. + \global\dimen1 = \prevdepth + \egroup % End the \vtop. + % \dimen0 is the vertical size of the group's box. + \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox + % \dimen2 is how much space is left on the page (more or less). + \dimen2 = \pageheight \advance\dimen2 by -\pagetotal + % if the group doesn't fit on the current page, and it's a big big + % group, force a page break. + \ifdim \dimen0 > \dimen2 + \ifdim \pagetotal < \vfilllimit\pageheight + \page + \fi + \fi + \box\groupbox + \prevdepth = \dimen1 + \checkinserts +} +% % TeX puts in an \escapechar (i.e., `@') at the beginning of the help % message, so this ends up printing `@group can only ...'. % @@ -648,10 +742,8 @@ where each line of input produces a line of output.} \newdimen\mil \mil=0.001in -\def\need{\parsearg\needx} - % Old definition--didn't work. -%\def\needx #1{\par % +%\parseargdef\need{\par % %% This method tries to make TeX break the page naturally %% if the depth of the box does not fit. %{\baselineskip=0pt% @@ -659,7 +751,7 @@ where each line of input produces a line of output.} %\prevdepth=-1000pt %}} -\def\needx#1{% +\parseargdef\need{% % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. \par @@ -698,35 +790,10 @@ where each line of input produces a line of output.} \fi } -% @br forces paragraph break +% @br forces paragraph break (and is undocumented). \let\br = \par -% @dots{} output an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in a typewriter -% font as three actual period characters. -% -\def\dots{% - \leavevmode - \hbox to 1.5em{% - \hskip 0pt plus 0.25fil minus 0.25fil - .\hss.\hss.% - \hskip 0pt plus 0.5fil minus 0.5fil - }% -} - -% @enddots{} is an end-of-sentence ellipsis. -% -\def\enddots{% - \leavevmode - \hbox to 2em{% - \hskip 0pt plus 0.25fil minus 0.25fil - .\hss.\hss.\hss.% - \hskip 0pt plus 0.5fil minus 0.5fil - }% - \spacefactor=3000 -} - % @page forces the start of a new page. % \def\page{\par\vfill\supereject} @@ -739,13 +806,11 @@ where each line of input produces a line of output.} \newskip\exdentamount % This defn is used inside fill environments such as @defun. -\def\exdent{\parsearg\exdentyyy} -\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}} +\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} % This defn is used inside nofill environments such as @example. -\def\nofillexdent{\parsearg\nofillexdentyyy} -\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount -\leftline{\hskip\leftskip{\rm#1}}}} +\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount + \leftline{\hskip\leftskip{\rm#1}}}} % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current % paragraph. For more general purposes, use the \margin insertion @@ -797,8 +862,19 @@ where each line of input produces a line of output.} } % @include file insert text of that file as input. -% Allow normal characters that we make active in the argument (a file name). -\def\include{\begingroup +% +\def\include{\parseargusing\filenamecatcodes\includezzz} +\def\includezzz#1{% + \pushthisfilestack + \def\thisfile{#1}% + {% + \makevalueexpandable + \def\temp{\input #1 }% + \expandafter + }\temp + \popthisfilestack +} +\def\filenamecatcodes{% \catcode`\\=\other \catcode`~=\other \catcode`^=\other @@ -807,33 +883,50 @@ where each line of input produces a line of output.} \catcode`<=\other \catcode`>=\other \catcode`+=\other - \parsearg\includezzz} -% Restore active chars for included file. -\def\includezzz#1{\endgroup\begingroup - % Read the included file in a group so nested @include's work. - \def\thisfile{#1}% - \let\value=\expandablevalue - \input\thisfile -\endgroup} + \catcode`-=\other +} + +\def\pushthisfilestack{% + \expandafter\pushthisfilestackX\popthisfilestack\StackTerm +} +\def\pushthisfilestackX{% + \expandafter\pushthisfilestackY\thisfile\StackTerm +} +\def\pushthisfilestackY #1\StackTerm #2\StackTerm {% + \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% +} + +\def\popthisfilestack{\errthisfilestackempty} +\def\errthisfilestackempty{\errmessage{Internal error: + the stack of filenames is empty.}} \def\thisfile{} % @center line % outputs that line, centered. % -\def\center{\parsearg\docenter} -\def\docenter#1{{% - \ifhmode \hfil\break \fi - \advance\hsize by -\leftskip - \advance\hsize by -\rightskip - \line{\hfil \ignorespaces#1\unskip \hfil}% - \ifhmode \break \fi -}} +\parseargdef\center{% + \ifhmode + \let\next\centerH + \else + \let\next\centerV + \fi + \next{\hfil \ignorespaces#1\unskip \hfil}% +} +\def\centerH#1{% + {% + \hfil\break + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{#1}% + \break + }% +} +\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} % @sp n outputs n lines of vertical space -\def\sp{\parsearg\spxxx} -\def\spxxx #1{\vskip #1\baselineskip} +\parseargdef\sp{\vskip #1\baselineskip} % @comment ...line which is ignored... % @c is the same as @comment @@ -854,8 +947,7 @@ where each line of input produces a line of output.} \def\asisword{asis} % no translation, these are keywords \def\noneword{none} % -\def\paragraphindent{\parsearg\doparagraphindent} -\def\doparagraphindent#1{% +\parseargdef\paragraphindent{% \def\temp{#1}% \ifx\temp\asisword \else @@ -872,8 +964,7 @@ where each line of input produces a line of output.} % We'll use ems for NCHARS like @paragraphindent. % It seems @exampleindent asis isn't necessary, but % I preserve it to make it similar to @paragraphindent. -\def\exampleindent{\parsearg\doexampleindent} -\def\doexampleindent#1{% +\parseargdef\exampleindent{% \def\temp{#1}% \ifx\temp\asisword \else @@ -887,21 +978,18 @@ where each line of input produces a line of output.} % @firstparagraphindent WORD % If WORD is `none', then suppress indentation of the first paragraph -% after a section heading. If WORD is `insert', then do indentat such +% after a section heading. If WORD is `insert', then do indent at such % paragraphs. % % The paragraph indentation is suppressed or not by calling -% \suppressfirstparagraphindent, which the sectioning commands do. We -% switch the definition of this back and forth according to WORD. By -% default, we suppress indentation. +% \suppressfirstparagraphindent, which the sectioning commands do. +% We switch the definition of this back and forth according to WORD. +% By default, we suppress indentation. % \def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} -\newdimen\currentparindent -% \def\insertword{insert} % -\def\firstparagraphindent{\parsearg\dofirstparagraphindent} -\def\dofirstparagraphindent#1{% +\parseargdef\firstparagraphindent{% \def\temp{#1}% \ifx\temp\noneword \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent @@ -921,15 +1009,24 @@ where each line of input produces a line of output.} % \gdef\dosuppressfirstparagraphindent{% \gdef\indent{% - \global\let\indent=\ptexindent - \global\everypar = {}% + \restorefirstparagraphindent + \indent + }% + \gdef\noindent{% + \restorefirstparagraphindent + \noindent }% \global\everypar = {% - \kern-\parindent - \global\let\indent=\ptexindent - \global\everypar = {}% + \kern -\parindent + \restorefirstparagraphindent }% -}% +} + +\gdef\restorefirstparagraphindent{% + \global \let \indent = \ptexindent + \global \let \noindent = \ptexnoindent + \global \everypar = {}% +} % @asis just yields its argument. Used with @table, for example. @@ -937,23 +1034,18 @@ where each line of input produces a line of output.} \def\asis#1{#1} % @math outputs its argument in math mode. -% We don't use $'s directly in the definition of \math because we need -% to set catcodes according to plain TeX first, to allow for subscripts, -% superscripts, special math chars, etc. -% -\let\implicitmath = $%$ font-lock fix % % One complication: _ usually means subscripts, but it could also mean % an actual _ character, as in @math{@var{some_variable} + 1}. So make -% _ within @math be active (mathcode "8000), and distinguish by seeing -% if the current family is \slfam, which is what @var uses. -% -{\catcode\underChar = \active -\gdef\mathunderscore{% - \catcode\underChar=\active - \def_{\ifnum\fam=\slfam \_\else\sb\fi}% -}} -% +% _ active, and distinguish by seeing if the current family is \slfam, +% which is what @var uses. +{ + \catcode`\_ = \active + \gdef\mathunderscore{% + \catcode`\_=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% + } +} % Another complication: we want \\ (and @\) to output a \ character. % FYI, plain.tex uses \\ as a temporary control sequence (why?), but % this is not advertised and we don't care. Texinfo does not @@ -964,15 +1056,16 @@ where each line of input produces a line of output.} % \def\math{% \tex - \mathcode`\_="8000 \mathunderscore + \mathunderscore \let\\ = \mathbackslash \mathactive - \implicitmath\finishmath} -\def\finishmath#1{#1\implicitmath\Etex} + $\finishmath +} +\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. % Some active characters (such as <) are spaced differently in math. -% We have to reset their definitions in case the @math was an -% argument to a command which set the catcodes (such as @item or @section). +% We have to reset their definitions in case the @math was an argument +% to a command which sets the catcodes (such as @item or @section). % { \catcode`^ = \active @@ -988,8 +1081,33 @@ where each line of input produces a line of output.} } % @bullet and @minus need the same treatment as @math, just above. -\def\bullet{\implicitmath\ptexbullet\implicitmath} -\def\minus{\implicitmath-\implicitmath} +\def\bullet{$\ptexbullet$} +\def\minus{$-$} + +% @dots{} outputs an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in a typewriter +% font as three actual period characters. +% +\def\dots{% + \leavevmode + \hbox to 1.5em{% + \hskip 0pt plus 0.25fil + .\hfil.\hfil.% + \hskip 0pt plus 0.5fil + }% +} + +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \dots + \spacefactor=\endofsentencespacefactor +} + +% @comma{} is so commas can be inserted into text without messing up +% Texinfo's parsing. +% +\let\comma = , % @refill is a no-op. \let\refill=\relax @@ -1005,20 +1123,20 @@ where each line of input produces a line of output.} % So open here the files we need to have open while reading the input. % This makes it possible to make a .fmt file for texinfo. \def\setfilename{% + \fixbackslash % Turn off hack to swallow `\input texinfo'. \iflinks - \readauxfile + \tryauxfile + % Open the new aux file. TeX will close it automatically at exit. + \immediate\openout\auxfile=\jobname.aux \fi % \openindices needs to do some work in any case. \openindices - \fixbackslash % Turn off hack to swallow `\input texinfo'. - \global\let\setfilename=\comment % Ignore extra @setfilename cmds. + \let\setfilename=\comment % Ignore extra @setfilename cmds. % % If texinfo.cnf is present on the system, read it. % Useful for site-wide @afourpaper, etc. - % Just to be on the safe side, close the input stream before the \input. \openin 1 texinfo.cnf - \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi - \closein1 - \temp + \ifeof 1 \else \input texinfo.cnf \fi + \closein 1 % \comment % Ignore the actual filename. } @@ -1054,17 +1172,72 @@ where each line of input produces a line of output.} \newif\ifpdf \newif\ifpdfmakepagedest +% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 +% can be set). So we test for \relax and 0 as well as \undefined, +% borrowed from ifpdf.sty. \ifx\pdfoutput\undefined - \pdffalse - \let\pdfmkdest = \gobble - \let\pdfurl = \gobble - \let\endlink = \relax - \let\linkcolor = \relax - \let\pdfmakeoutlines = \relax \else - \pdftrue - \pdfoutput = 1 + \ifx\pdfoutput\relax + \else + \ifcase\pdfoutput + \else + \pdftrue + \fi + \fi +\fi + +% PDF uses PostScript string constants for the names of xref targets, +% for display in the outlines, and in other places. Thus, we have to +% double any backslashes. Otherwise, a name like "\node" will be +% interpreted as a newline (\n), followed by o, d, e. Not good. +% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html +% (and related messages, the final outcome is that it is up to the TeX +% user to double the backslashes and otherwise make the string valid, so +% that's what we do). + +% double active backslashes. +% +{\catcode`\@=0 \catcode`\\=\active + @gdef@activebackslashdouble{% + @catcode`@\=@active + @let\=@doublebackslash} +} + +% To handle parens, we must adopt a different approach, since parens are +% not active characters. hyperref.dtx (which has the same problem as +% us) handles it with this amazing macro to replace tokens. I've +% tinkered with it a little for texinfo, but it's definitely from there. +% +% #1 is the tokens to replace. +% #2 is the replacement. +% #3 is the control sequence with the string. +% +\def\HyPsdSubst#1#2#3{% + \def\HyPsdReplace##1#1##2\END{% + ##1% + \ifx\\##2\\% + \else + #2% + \HyReturnAfterFi{% + \HyPsdReplace##2\END + }% + \fi + }% + \xdef#3{\expandafter\HyPsdReplace#3#1\END}% +} +\long\def\HyReturnAfterFi#1\fi{\fi#1} + +% #1 is a control sequence in which to do the replacements. +\def\backslashparens#1{% + \xdef#1{#1}% redefine it as its expansion; the definition is simply + % \lastnode when called from \setref -> \pdfmkdest. + \HyPsdSubst{(}{\realbackslash(}{#1}% + \HyPsdSubst{)}{\realbackslash)}{#1}% +} + +\ifpdf \input pdfcolor + \pdfcatalog{/PageMode /UseOutlines}% \def\dopdfimage#1#2#3{% \def\imagewidth{#2}% \def\imageheight{#3}% @@ -1085,8 +1258,19 @@ where each line of input produces a line of output.} \ifnum\pdftexversion < 14 \else \pdfrefximage \pdflastximage \fi} - \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}} - \def\pdfmkpgn#1{#1} + \def\pdfmkdest#1{{% + % We have to set dummies so commands such as @code, and characters + % such as \, aren't expanded when present in a section title. + \atdummies + \activebackslashdouble + \def\pdfdestname{#1}% + \backslashparens\pdfdestname + \pdfdest name{\pdfdestname} xyz% + }}% + % + % used to mark target names; must be expandable. + \def\pdfmkpgn#1{#1}% + % \let\linkcolor = \Blue % was Cyan, but that seems light? \def\endlink{\Black\pdfendlink} % Adding outlines to PDF; macros for calculating structure of outlines @@ -1094,79 +1278,106 @@ where each line of input produces a line of output.} \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% \else \csname#1\endcsname \fi} \def\advancenumber#1{\tempnum=\expnumber{#1}\relax - \advance\tempnum by1 + \advance\tempnum by 1 \expandafter\xdef\csname#1\endcsname{\the\tempnum}} - \def\pdfmakeoutlines{{% - \openin 1 \jobname.toc - \ifeof 1\else\begingroup - \closein 1 + % + % #1 is the section text, which is what will be displayed in the + % outline by the pdf viewer. #2 is the pdf expression for the number + % of subentries (or empty, for subsubsections). #3 is the node text, + % which might be empty if this toc entry had no corresponding node. + % #4 is the page number + % + \def\dopdfoutline#1#2#3#4{% + % Generate a link to the node text if that exists; else, use the + % page number. We could generate a destination for the section + % text in the case where a section has no node, but it doesn't + % seem worth the trouble, since most documents are normally structured. + \def\pdfoutlinedest{#3}% + \ifx\pdfoutlinedest\empty + \def\pdfoutlinedest{#4}% + \else + % Doubled backslashes in the name. + {\activebackslashdouble \xdef\pdfoutlinedest{#3}% + \backslashparens\pdfoutlinedest}% + \fi + % + % Also double the backslashes in the display string. + {\activebackslashdouble \xdef\pdfoutlinetext{#1}% + \backslashparens\pdfoutlinetext}% + % + \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% + } + % + \def\pdfmakeoutlines{% + \begingroup % Thanh's hack / proper braces in bookmarks \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace % - \def\chapentry ##1##2##3{} - \def\secentry ##1##2##3##4{\advancenumber{chap##2}} - \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}} - \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}} - \let\appendixentry = \chapentry - \let\unnumbchapentry = \chapentry - \let\unnumbsecentry = \secentry - \let\unnumbsubsecentry = \subsecentry - \let\unnumbsubsubsecentry = \subsubsecentry - \input \jobname.toc - \def\chapentry ##1##2##3{% - \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}} - \def\secentry ##1##2##3##4{% - \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}} - \def\subsecentry ##1##2##3##4##5{% - \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}} - \def\subsubsecentry ##1##2##3##4##5##6{% - \pdfoutline goto name{\pdfmkpgn{##6}}{##1}} - \let\appendixentry = \chapentry - \let\unnumbchapentry = \chapentry - \let\unnumbsecentry = \secentry - \let\unnumbsubsecentry = \subsecentry - \let\unnumbsubsubsecentry = \subsubsecentry + % Read toc silently, to get counts of subentries for \pdfoutline. + \def\numchapentry##1##2##3##4{% + \def\thischapnum{##2}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + }% + \def\numsecentry##1##2##3##4{% + \advancenumber{chap\thischapnum}% + \def\thissecnum{##2}% + \def\thissubsecnum{0}% + }% + \def\numsubsecentry##1##2##3##4{% + \advancenumber{sec\thissecnum}% + \def\thissubsecnum{##2}% + }% + \def\numsubsubsecentry##1##2##3##4{% + \advancenumber{subsec\thissubsecnum}% + }% + \def\thischapnum{0}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + % + % use \def rather than \let here because we redefine \chapentry et + % al. a second time, below. + \def\appentry{\numchapentry}% + \def\appsecentry{\numsecentry}% + \def\appsubsecentry{\numsubsecentry}% + \def\appsubsubsecentry{\numsubsubsecentry}% + \def\unnchapentry{\numchapentry}% + \def\unnsecentry{\numsecentry}% + \def\unnsubsecentry{\numsubsecentry}% + \def\unnsubsubsecentry{\numsubsubsecentry}% + \readdatafile{toc}% + % + % Read toc second time, this time actually producing the outlines. + % The `-' means take the \expnumber as the absolute number of + % subentries, which we calculated on our first read of the .toc above. % - % Make special characters normal for writing to the pdf file. + % We use the node names as the destinations. + \def\numchapentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% + \def\numsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% + \def\numsubsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% + \def\numsubsubsecentry##1##2##3##4{% count is always zero + \dopdfoutline{##1}{}{##3}{##4}}% % + % PDF outlines are displayed using system fonts, instead of + % document fonts. Therefore we cannot use special characters, + % since the encoding is unknown. For example, the eogonek from + % Latin 2 (0xea) gets translated to a | character. Info from + % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. + % + % xx to do this right, we have to translate 8-bit characters to + % their "best" equivalent, based on the @documentencoding. Right + % now, I guess we'll just let the pdf reader have its way. \indexnofonts - \let\tt=\relax - \turnoffactive + \setupdatafile + \catcode`\\=\active \otherbackslash \input \jobname.toc - \endgroup\fi - }} - \def\makelinks #1,{% - \def\params{#1}\def\E{END}% - \ifx\params\E - \let\nextmakelinks=\relax - \else - \let\nextmakelinks=\makelinks - \ifnum\lnkcount>0,\fi - \picknum{#1}% - \startlink attr{/Border [0 0 0]} - goto name{\pdfmkpgn{\the\pgn}}% - \linkcolor #1% - \advance\lnkcount by 1% - \endlink - \fi - \nextmakelinks - } - \def\picknum#1{\expandafter\pn#1} - \def\pn#1{% - \def\p{#1}% - \ifx\p\lbrace - \let\nextpn=\ppn - \else - \let\nextpn=\ppnn - \def\first{#1} - \fi - \nextpn + \endgroup } - \def\ppn#1{\pgn=#1\gobble} - \def\ppnn{\pgn=\first} - \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} - \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + % \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax \else\let\nextsp\skipspaces @@ -1181,21 +1392,28 @@ where each line of input produces a line of output.} \else \let \startlink \pdfstartlink \fi + % make a live url in pdf output. \def\pdfurl#1{% \begingroup - \normalturnoffactive\def\@{@}% - \let\value=\expandablevalue + % it seems we really need yet another set of dummies; have not + % tried to figure out what each command should do in the context + % of @url. for now, just make @/ a no-op, that's the only one + % people have actually reported a problem with. + % + \normalturnoffactive + \def\@{@}% + \let\/=\empty + \makevalueexpandable \leavevmode\Red \startlink attr{/Border [0 0 0]}% user{/Subtype /Link /A << /S /URI /URI (#1) >>}% - % #1 \endgroup} \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} \def\maketoks{% - \expandafter\poptoks\the\toksA|ENDTOKS| + \expandafter\poptoks\the\toksA|ENDTOKS|\relax \ifx\first0\adn0 \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 @@ -1215,20 +1433,44 @@ where each line of input produces a line of output.} \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} \linkcolor #1\endlink} \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} -\fi % \ifx\pdfoutput +\else + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\linkcolor = \relax + \let\pdfmakeoutlines = \relax +\fi % \ifx\pdfoutput \message{fonts,} -% Font-change commands. -% Texinfo sort of supports the sans serif font style, which plain TeX does not. -% So we set up a \sf analogous to plain's \rm, etc. +% Change the current font style to #1, remembering it in \curfontstyle. +% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in +% italics, not bold italics. +% +\def\setfontstyle#1{% + \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. + \csname ten#1\endcsname % change the current font +} + +% Select #1 fonts with the current style. +% +\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} + +\def\rm{\fam=0 \setfontstyle{rm}} +\def\it{\fam=\itfam \setfontstyle{it}} +\def\sl{\fam=\slfam \setfontstyle{sl}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} +\def\tt{\fam=\ttfam \setfontstyle{tt}} + +% Texinfo sort of supports the sans serif font style, which plain TeX does not. +% So we set up a \sf. \newfam\sffam -\def\sf{\fam=\sffam \tensf} +\def\sf{\fam=\sffam \setfontstyle{sf}} \let\li = \sf % Sometimes we call it \li, not \sf. -% We don't need math for this one. -\def\ttsl{\tenttsl} +% We don't need math for this font style. +\def\ttsl{\setfontstyle{ttsl}} % Default leading. \newdimen\textleading \textleading = 13.2pt @@ -1279,21 +1521,11 @@ where each line of input produces a line of output.} \def\scshape{csc} \def\scbshape{csc} -\newcount\mainmagstep -\ifx\bigger\relax - % not really supported. - \mainmagstep=\magstep1 - \setfont\textrm\rmshape{12}{1000} - \setfont\texttt\ttshape{12}{1000} -\else - \mainmagstep=\magstephalf - \setfont\textrm\rmshape{10}{\mainmagstep} - \setfont\texttt\ttshape{10}{\mainmagstep} -\fi -% Instead of cmb10, you may want to use cmbx10. -% cmbx10 is a prettier font on its own, but cmb10 -% looks better when embedded in a line with cmr10 -% (in Bob's opinion). +% Text fonts (11.2pt, magstep1). +\def\textnominalsize{11pt} +\edef\mainmagstep{\magstephalf} +\setfont\textrm\rmshape{10}{\mainmagstep} +\setfont\texttt\ttshape{10}{\mainmagstep} \setfont\textbf\bfshape{10}{\mainmagstep} \setfont\textit\itshape{10}{\mainmagstep} \setfont\textsl\slshape{10}{\mainmagstep} @@ -1303,12 +1535,14 @@ where each line of input produces a line of output.} \font\texti=cmmi10 scaled \mainmagstep \font\textsy=cmsy10 scaled \mainmagstep -% A few fonts for @defun, etc. -\setfont\defbf\bxshape{10}{\magstep1} %was 1314 +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstep1} \setfont\deftt\ttshape{10}{\magstep1} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} +\setfont\defttsl\ttslshape{10}{\magstep1} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} % Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} \setfont\smallrm\rmshape{9}{1000} \setfont\smalltt\ttshape{9}{1000} \setfont\smallbf\bfshape{10}{900} @@ -1321,6 +1555,7 @@ where each line of input produces a line of output.} \font\smallsy=cmsy9 % Fonts for small examples (8pt). +\def\smallernominalsize{8pt} \setfont\smallerrm\rmshape{8}{1000} \setfont\smallertt\ttshape{8}{1000} \setfont\smallerbf\bfshape{10}{800} @@ -1332,7 +1567,8 @@ where each line of input produces a line of output.} \font\smalleri=cmmi8 \font\smallersy=cmsy8 -% Fonts for title page: +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} \setfont\titlerm\rmbshape{12}{\magstep3} \setfont\titleit\itbshape{10}{\magstep4} \setfont\titlesl\slbshape{10}{\magstep4} @@ -1347,6 +1583,7 @@ where each line of input produces a line of output.} \def\authortt{\sectt} % Chapter (and unnumbered) fonts (17.28pt). +\def\chapnominalsize{17pt} \setfont\chaprm\rmbshape{12}{\magstep2} \setfont\chapit\itbshape{10}{\magstep3} \setfont\chapsl\slbshape{10}{\magstep3} @@ -1359,6 +1596,7 @@ where each line of input produces a line of output.} \font\chapsy=cmsy10 scaled \magstep3 % Section fonts (14.4pt). +\def\secnominalsize{14pt} \setfont\secrm\rmbshape{12}{\magstep1} \setfont\secit\itbshape{10}{\magstep2} \setfont\secsl\slbshape{10}{\magstep2} @@ -1371,6 +1609,7 @@ where each line of input produces a line of output.} \font\secsy=cmsy10 scaled \magstep2 % Subsection fonts (13.15pt). +\def\ssecnominalsize{13pt} \setfont\ssecrm\rmbshape{12}{\magstephalf} \setfont\ssecit\itbshape{10}{1315} \setfont\ssecsl\slbshape{10}{1315} @@ -1378,11 +1617,22 @@ where each line of input produces a line of output.} \setfont\ssecttsl\ttslshape{10}{1315} \setfont\ssecsf\sfbshape{12}{\magstephalf} \let\ssecbf\ssecrm -\setfont\ssecsc\scbshape{10}{\magstep1} +\setfont\ssecsc\scbshape{10}{1315} \font\sseci=cmmi12 scaled \magstephalf \font\ssecsy=cmsy10 scaled 1315 -% The smallcaps and symbol fonts should actually be scaled \magstep1.5, -% but that is not a standard magnification. + +% Reduced fonts for @acro in text (10pt). +\def\reducednominalsize{10pt} +\setfont\reducedrm\rmshape{10}{1000} +\setfont\reducedtt\ttshape{10}{1000} +\setfont\reducedbf\bfshape{10}{1000} +\setfont\reducedit\itshape{10}{1000} +\setfont\reducedsl\slshape{10}{1000} +\setfont\reducedsf\sfshape{10}{1000} +\setfont\reducedsc\scshape{10}{1000} +\setfont\reducedttsl\ttslshape{10}{1000} +\font\reducedi=cmmi10 +\font\reducedsy=cmsy10 % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since @@ -1397,50 +1647,81 @@ where each line of input produces a line of output.} } % The font-changing commands redefine the meanings of \tenSTYLE, instead -% of just \STYLE. We do this so that font changes will continue to work -% in math mode, where it is the current \fam that is relevant in most -% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam -% \tenbf}, for example. By redefining \tenbf, we obviate the need to -% redefine \bf itself. +% of just \STYLE. We do this because \STYLE needs to also set the +% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire +% \tenSTYLE to set the current font. +% +% Each font-changing command also sets the names \lsize (one size lower) +% and \lllsize (three sizes lower). These relative commands are used in +% the LaTeX logo and acronyms. +% +% This all needs generalizing, badly. +% \def\textfonts{% \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc - \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl + \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy + \let\tenttsl=\textttsl + \def\curfontsize{text}% + \def\lsize{reduced}\def\lllsize{smaller}% \resetmathfonts \setleading{\textleading}} \def\titlefonts{% \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy \let\tenttsl=\titlettsl + \def\curfontsize{title}% + \def\lsize{chap}\def\lllsize{subsec}% \resetmathfonts \setleading{25pt}} \def\titlefont#1{{\titlefonts\rm #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \let\tenttsl=\chapttsl + \def\curfontsize{chap}% + \def\lsize{sec}\def\lllsize{text}% \resetmathfonts \setleading{19pt}} \def\secfonts{% \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc - \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl + \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy + \let\tenttsl=\secttsl + \def\curfontsize{sec}% + \def\lsize{subsec}\def\lllsize{reduced}% \resetmathfonts \setleading{16pt}} \def\subsecfonts{% \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc - \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl + \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy + \let\tenttsl=\ssecttsl + \def\curfontsize{ssec}% + \def\lsize{text}\def\lllsize{small}% \resetmathfonts \setleading{15pt}} -\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf? +\let\subsubsecfonts = \subsecfonts +\def\reducedfonts{% + \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl + \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc + \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy + \let\tenttsl=\reducedttsl + \def\curfontsize{reduced}% + \def\lsize{small}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} \def\smallfonts{% \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy \let\tenttsl=\smallttsl + \def\curfontsize{small}% + \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallerfonts{% \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy \let\tenttsl=\smallerttsl + \def\curfontsize{smaller}% + \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{9.5pt}} % Set the fonts to use with the @small... environments. @@ -1449,7 +1730,7 @@ where each line of input produces a line of output.} % About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample % can fit this many characters: % 8.5x11=86 smallbook=72 a4=90 a5=69 -% If we use \smallerfonts (8pt), then we can fit this many characters: +% If we use \scriptfonts (8pt), then we can fit this many characters: % 8.5x11=90+ smallbook=80 a4=90+ a5=77 % For me, subjectively, the few extra characters that fit aren't worth % the additional smallness of 8pt. So I'm making the default 9pt. @@ -1457,14 +1738,13 @@ where each line of input produces a line of output.} % By the way, for comparison, here's what fits with @example (10pt): % 8.5x11=71 smallbook=60 a4=75 a5=58 % -% I wish we used A4 paper on this side of the Atlantic. -% +% I wish the USA used A4 paper. % --karl, 24jan03. % Set up the default fonts, so we can use them for creating boxes. % -\textfonts +\textfonts \rm % Define these so they can be easily changed for other fonts. \def\angleleft{$\langle$} @@ -1475,7 +1755,7 @@ where each line of input produces a line of output.} % Fonts for short table of contents. \setfont\shortcontrm\rmshape{12}{1000} -\setfont\shortcontbf\bxshape{12}{1000} +\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12 \setfont\shortcontsl\slshape{12}{1000} \setfont\shortconttt\ttshape{12}{1000} @@ -1489,15 +1769,27 @@ where each line of input produces a line of output.} \def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} \def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} +% like \smartslanted except unconditionally uses \ttsl. +% @var is set to this for defun arguments. +\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} + +% like \smartslanted except unconditionally use \sl. We never want +% ttsl for book titles, do we? +\def\cite#1{{\sl #1}\futurelet\next\smartitalicx} + \let\i=\smartitalic +\let\slanted=\smartslanted \let\var=\smartslanted \let\dfn=\smartslanted \let\emph=\smartitalic -\let\cite=\smartslanted +% @b, explicit bold. \def\b#1{{\bf #1}} \let\strong=\b +% @sansserif, explicit sans. +\def\sansserif#1{{\sf #1}} + % We can't just use \exhyphenpenalty, because that only has effect at % the end of a paragraph. Restore normal hyphenation at the end of the % group within which \nohyphenation is presumably called. @@ -1509,18 +1801,31 @@ where each line of input produces a line of output.} % Can't use plain's \frenchspacing because it uses the `\x notation, and % sometimes \x has an active definition that messes things up. % +\chardef\colonChar = `\: +\chardef\commaChar = `\, +\chardef\dotChar = `\. +\chardef\exclamChar= `\! +\chardef\questChar = `\? +\chardef\semiChar = `\; +% \catcode`@=11 - \def\frenchspacing{% + \def\plainfrenchspacing{% \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m + \def\endofsentencespacefactor{1000}% for @. and friends + } + \def\plainnonfrenchspacing{% + \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000 + \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250 + \def\endofsentencespacefactor{3000}% for @. and friends } \catcode`@=\other +\def\endofsentencespacefactor{3000}% default \def\t#1{% - {\tt \rawbackslash \frenchspacing #1}% + {\tt \rawbackslash \plainfrenchspacing #1}% \null } -\let\ttfont=\t \def\samp#1{`\tclose{#1}'\null} \setfont\keyrm\rmshape{8}{1000} \font\keysy=cmsy9 @@ -1555,13 +1860,13 @@ where each line of input produces a line of output.} \nohyphenation % \rawbackslash - \frenchspacing + \plainfrenchspacing #1% }% \null } -% We *must* turn on hyphenation at `-' and `_' in \code. +% We *must* turn on hyphenation at `-' and `_' in @code. % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. @@ -1575,14 +1880,16 @@ where each line of input produces a line of output.} \catcode`\_=\active % \global\def\code{\begingroup - \catcode`\-=\active \let-\codedash - \catcode`\_=\active \let_\codeunder + \catcode`\-=\active \catcode`\_=\active + \ifallowcodebreaks + \let-\codedash + \let_\codeunder + \else + \let-\realdash + \let_\realunder + \fi \codex } - % - % If we end up with any active - characters when handling the index, - % just treat them as a normal -. - \global\def\indexbreaks{\catcode`\-=\active \let-\realdash} } \def\realdash{-} @@ -1600,24 +1907,45 @@ where each line of input produces a line of output.} } \def\codex #1{\tclose{#1}\endgroup} +% An additional complication: the above will allow breaks after, e.g., +% each of the four underscores in __typeof__. This is undesirable in +% some manuals, especially if they don't have long identifiers in +% general. @allowcodebreaks provides a way to control this. +% +\newif\ifallowcodebreaks \allowcodebreakstrue + +\def\keywordtrue{true} +\def\keywordfalse{false} + +\parseargdef\allowcodebreaks{% + \def\txiarg{#1}% + \ifx\txiarg\keywordtrue + \allowcodebreakstrue + \else\ifx\txiarg\keywordfalse + \allowcodebreaksfalse + \else + \errhelp = \EMsimple + \errmessage{Unknown @allowcodebreaks option `\txiarg'}% + \fi\fi +} + % @kbd is like @code, except that if the argument is just one @key command, % then @kbd has no effect. % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). -\def\kbdinputstyle{\parsearg\kbdinputstylexxx} -\def\kbdinputstylexxx#1{% - \def\arg{#1}% - \ifx\arg\worddistinct +\parseargdef\kbdinputstyle{% + \def\txiarg{#1}% + \ifx\txiarg\worddistinct \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\arg\wordexample + \else\ifx\txiarg\wordexample \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\arg\wordcode + \else\ifx\txiarg\wordcode \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% \else \errhelp = \EMsimple - \errmessage{Unknown @kbdinputstyle option `\arg'}% + \errmessage{Unknown @kbdinputstyle option `\txiarg'}% \fi\fi\fi } \def\worddistinct{distinct} @@ -1633,8 +1961,8 @@ where each line of input produces a line of output.} \else{\tclose{\kbdfont\look}}\fi \else{\tclose{\kbdfont\look}}\fi} -% For @url, @env, @command quotes seem unnecessary, so use \code. -\let\url=\code +% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. +\let\indicateurl=\code \let\env=\code \let\command=\code @@ -1666,6 +1994,10 @@ where each line of input produces a line of output.} \endlink \endgroup} +% @url synonym for @uref, since that's how everyone uses it. +% +\let\url=\uref + % rms does not like angle brackets --karl, 17may97. % So now @email is just like @uref, unless we are pdf. % @@ -1707,22 +2039,101 @@ where each line of input produces a line of output.} \def\sc#1{{\smallcaps#1}} % smallcaps font \def\ii#1{{\it #1}} % italic font -% @acronym downcases the argument and prints in smallcaps. -\def\acronym#1{{\smallcaps \lowercase{#1}}} +% @acronym for "FBI", "NATO", and the like. +% We print this one point size smaller, since it's intended for +% all-uppercase. +% +\def\acronym#1{\doacronym #1,,\finish} +\def\doacronym#1,#2,#3\finish{% + {\selectfonts\lsize #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi +} + +% @abbr for "Comput. J." and the like. +% No font change, but don't do end-of-sentence spacing. +% +\def\abbr#1{\doabbr #1,,\finish} +\def\doabbr#1,#2,#3\finish{% + {\plainfrenchspacing #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi +} -% @pounds{} is a sterling sign. +% @pounds{} is a sterling sign, which Knuth put in the CM italic font. +% \def\pounds{{\it\$}} -% @registeredsymbol - R in a circle. For now, only works in text size; -% we'd have to redo the font mechanism to change the \scriptstyle and -% \scriptscriptstyle font sizes to make it look right in headings. +% @euro{} comes from a separate font, depending on the current style. +% We use the free feym* fonts from the eurosym package by Henrik +% Theiling, which support regular, slanted, bold and bold slanted (and +% "outlined" (blackboard board, sort of) versions, which we don't need). +% It is available from http://www.ctan.org/tex-archive/fonts/eurosym. +% +% Although only regular is the truly official Euro symbol, we ignore +% that. The Euro is designed to be slightly taller than the regular +% font height. +% +% feymr - regular +% feymo - slanted +% feybr - bold +% feybo - bold slanted +% +% There is no good (free) typewriter version, to my knowledge. +% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. +% Hmm. +% +% Also doesn't work in math. Do we need to do math with euro symbols? +% Hope not. +% +% +\def\euro{{\eurofont e}} +\def\eurofont{% + % We set the font at each command, rather than predefining it in + % \textfonts and the other font-switching commands, so that + % installations which never need the symbol don't have to have the + % font installed. + % + % There is only one designed size (nominal 10pt), so we always scale + % that to the current nominal size. + % + % By the way, simply using "at 1em" works for cmr10 and the like, but + % does not work for cmbx10 and other extended/shrunken fonts. + % + \def\eurosize{\csname\curfontsize nominalsize\endcsname}% + % + \ifx\curfontstyle\bfstylename + % bold: + \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize + \else + % regular: + \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize + \fi + \thiseurofont +} + +% @registeredsymbol - R in a circle. The font for the R should really +% be smaller yet, but lllsize is the best we can do for now. % Adapted from the plain.tex definition of \copyright. % \def\registeredsymbol{% - $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}% + $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% + \hfil\crcr\Orb}}% }$% } +% Laurent Siebenmann reports \Orb undefined with: +% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 +% so we'll define it if necessary. +% +\ifx\Orb\undefined +\def\Orb{\mathhexbox20D} +\fi + \message{page headings,} @@ -1741,87 +2152,103 @@ where each line of input produces a line of output.} \newif\ifsetshortcontentsaftertitlepage \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue -\def\shorttitlepage{\parsearg\shorttitlepagezzz} -\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% +\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% \endgroup\page\hbox{}\page} -\def\titlepage{\begingroup \parindent=0pt \textfonts - \let\subtitlerm=\tenrm - \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}% - % - \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines - \let\tt=\authortt}% - % - % Leave some space at the very top of the page. - \vglue\titlepagetopglue - % - % Now you can print the title using @title. - \def\title{\parsearg\titlezzz}% - \def\titlezzz##1{\leftline{\titlefonts\rm ##1} - % print a rule at the page bottom also. - \finishedtitlepagefalse - \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% - % No rule at page bottom unless we print one at the top with @title. - \finishedtitlepagetrue - % - % Now you can put text using @subtitle. - \def\subtitle{\parsearg\subtitlezzz}% - \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}% - % - % @author should come last, but may come many times. - \def\author{\parsearg\authorzzz}% - \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi - {\authorfont \leftline{##1}}}% - % - % Most title ``pages'' are actually two pages long, with space - % at the top of the second. We don't want the ragged left on the second. - \let\oldpage = \page - \def\page{% +\envdef\titlepage{% + % Open one extra group, as we want to close it in the middle of \Etitlepage. + \begingroup + \parindent=0pt \textfonts + % Leave some space at the very top of the page. + \vglue\titlepagetopglue + % No rule at page bottom unless we print one at the top with @title. + \finishedtitlepagetrue + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page + \def\page{% \iffinishedtitlepage\else - \finishtitlepage + \finishtitlepage \fi - \oldpage \let\page = \oldpage - \hbox{}}% -% \def\page{\oldpage \hbox{}} + \page + \null + }% } \def\Etitlepage{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - % It is important to do the page break before ending the group, - % because the headline and footline are only empty inside the group. - % If we use the new definition of \page, we always get a blank page - % after the title page, which we certainly don't want. - \oldpage - \endgroup - % - % Need this before the \...aftertitlepage checks so that if they are - % in effect the toc pages will come out with page numbers. - \HEADINGSon - % - % If they want short, they certainly want long too. - \ifsetshortcontentsaftertitlepage - \shortcontents - \contents - \global\let\shortcontents = \relax - \global\let\contents = \relax - \fi - % - \ifsetcontentsaftertitlepage - \contents - \global\let\contents = \relax - \global\let\shortcontents = \relax - \fi + \iffinishedtitlepage\else + \finishtitlepage + \fi + % It is important to do the page break before ending the group, + % because the headline and footline are only empty inside the group. + % If we use the new definition of \page, we always get a blank page + % after the title page, which we certainly don't want. + \oldpage + \endgroup + % + % Need this before the \...aftertitlepage checks so that if they are + % in effect the toc pages will come out with page numbers. + \HEADINGSon + % + % If they want short, they certainly want long too. + \ifsetshortcontentsaftertitlepage + \shortcontents + \contents + \global\let\shortcontents = \relax + \global\let\contents = \relax + \fi + % + \ifsetcontentsaftertitlepage + \contents + \global\let\contents = \relax + \global\let\shortcontents = \relax + \fi } \def\finishtitlepage{% - \vskip4pt \hrule height 2pt width \hsize - \vskip\titlepagebottomglue - \finishedtitlepagetrue + \vskip4pt \hrule height 2pt width \hsize + \vskip\titlepagebottomglue + \finishedtitlepagetrue +} + +%%% Macros to be used within @titlepage: + +\let\subtitlerm=\tenrm +\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} + +\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines + \let\tt=\authortt} + +\parseargdef\title{% + \checkenv\titlepage + \leftline{\titlefonts\rm #1} + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt +} + +\parseargdef\subtitle{% + \checkenv\titlepage + {\subtitlefont \rightline{#1}}% +} + +% @author should come last, but may come many times. +% It can also be used inside @quotation. +% +\parseargdef\author{% + \def\temp{\quotation}% + \ifx\thisenv\temp + \def\quotationauthor{#1}% printed in \Equotation. + \else + \checkenv\titlepage + \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi + {\authorfont \leftline{#1}}% + \fi } + %%% Set up page headings and footings. \let\thispage=\folio @@ -1831,7 +2258,7 @@ where each line of input produces a line of output.} \newtoks\evenfootline % footline on even pages \newtoks\oddfootline % footline on odd pages -% Now make Tex use those variables +% Now make TeX use those variables \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline \else \the\evenheadline \fi}} \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline @@ -1845,32 +2272,27 @@ where each line of input produces a line of output.} % @evenfooting @thisfile|| % @oddfooting ||@thisfile -\def\evenheading{\parsearg\evenheadingxxx} -\def\oddheading{\parsearg\oddheadingxxx} -\def\everyheading{\parsearg\everyheadingxxx} - -\def\evenfooting{\parsearg\evenfootingxxx} -\def\oddfooting{\parsearg\oddfootingxxx} -\def\everyfooting{\parsearg\everyfootingxxx} - -{\catcode`\@=0 % -\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish} -\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{% +\def\evenheading{\parsearg\evenheadingxxx} +\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} +\def\evenheadingyyy #1\|#2\|#3\|#4\finish{% \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish} -\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% +\def\oddheading{\parsearg\oddheadingxxx} +\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} +\def\oddheadingyyy #1\|#2\|#3\|#4\finish{% \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}% +\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% -\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} -\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% +\def\evenfooting{\parsearg\evenfootingxxx} +\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} +\def\evenfootingyyy #1\|#2\|#3\|#4\finish{% \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} -\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% +\def\oddfooting{\parsearg\oddfootingxxx} +\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} +\def\oddfootingyyy #1\|#2\|#3\|#4\finish{% \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% % % Leave some space for the footline. Hopefully ok to assume @@ -1879,9 +2301,8 @@ where each line of input produces a line of output.} \global\advance\vsize by -\baselineskip } -\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}} -% -}% unbind the catcode of @. +\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} + % @headings double turns headings on for double-sided printing. % @headings single turns headings on for single-sided printing. @@ -1895,7 +2316,7 @@ where each line of input produces a line of output.} \def\headings #1 {\csname HEADINGS#1\endcsname} -\def\HEADINGSoff{ +\def\HEADINGSoff{% \global\evenheadline={\hfil} \global\evenfootline={\hfil} \global\oddheadline={\hfil} \global\oddfootline={\hfil}} \HEADINGSoff @@ -1904,7 +2325,7 @@ where each line of input produces a line of output.} % chapter name on inside top of right hand pages, document % title on inside top of left hand pages, and page numbers on outside top % edge of all pages. -\def\HEADINGSdouble{ +\def\HEADINGSdouble{% \global\pageno=1 \global\evenfootline={\hfil} \global\oddfootline={\hfil} @@ -1916,7 +2337,7 @@ where each line of input produces a line of output.} % For single-sided printing, chapter title goes across top left of page, % page number on top right. -\def\HEADINGSsingle{ +\def\HEADINGSsingle{% \global\pageno=1 \global\evenfootline={\hfil} \global\oddfootline={\hfil} @@ -1963,12 +2384,11 @@ where each line of input produces a line of output.} % @settitle line... specifies the title of the document, for headings. % It generates no output of its own. \def\thistitle{\putwordNoTitle} -\def\settitle{\parsearg\settitlezzz} -\def\settitlezzz #1{\gdef\thistitle{#1}} +\def\settitle{\parsearg{\gdef\thistitle}} \message{tables,} -% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x). +% Tables -- @table, @ftable, @vtable, @item(x). % default indentation of table text \newdimen\tableindent \tableindent=.8in @@ -1980,7 +2400,7 @@ where each line of input produces a line of output.} % used internally for \itemindent minus \itemmargin \newdimen\itemmax -% Note @table, @vtable, and @vtable define @item, @itemx, etc., with +% Note @table, @ftable, and @vtable define @item, @itemx, etc., with % these defs. % They also define \itemindex % to index the item name in whatever manner is desired (perhaps none). @@ -1992,22 +2412,10 @@ where each line of input produces a line of output.} \def\internalBitem{\smallbreak \parsearg\itemzzz} \def\internalBitemx{\itemxpar \parsearg\itemzzz} -\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz} -\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz} - -\def\internalBkitem{\smallbreak \parsearg\kitemzzz} -\def\internalBkitemx{\itemxpar \parsearg\kitemzzz} - -\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}% - \itemzzz {#1}} - -\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}% - \itemzzz {#1}} - \def\itemzzz #1{\begingroup % \advance\hsize by -\rightskip \advance\hsize by -\tableindent - \setbox0=\hbox{\itemfont{#1}}% + \setbox0=\hbox{\itemindicate{#1}}% \itemindex{#1}% \nobreak % This prevents a break before @itemx. % @@ -2031,17 +2439,13 @@ where each line of input produces a line of output.} % \parskip glue -- logically it's part of the @item we just started. \nobreak \vskip-\parskip % - % Stop a page break at the \parskip glue coming up. (Unfortunately - % we can't prevent a possible page break at the following - % \baselineskip glue.) However, if what follows is an environment - % such as @example, there will be no \parskip glue; then - % the negative vskip we just would cause the example and the item to - % crash together. So we use this bizarre value of 10001 as a signal - % to \aboveenvbreak to insert \parskip glue after all. - % (Possibly there are other commands that could be followed by - % @example which need the same treatment, but not section titles; or - % maybe section titles are the only special case and they should be - % penalty 10001...) + % Stop a page break at the \parskip glue coming up. However, if + % what follows is an environment such as @example, there will be no + % \parskip glue; then the negative vskip we just inserted would + % cause the example and the item to crash together. So we use this + % bizarre value of 10001 as a signal to \aboveenvbreak to insert + % \parskip glue after all. Section titles are handled this way also. + % \penalty 10001 \endgroup \itemxneedsnegativevskipfalse @@ -2061,81 +2465,72 @@ where each line of input produces a line of output.} \fi } -\def\item{\errmessage{@item while not in a table}} -\def\itemx{\errmessage{@itemx while not in a table}} -\def\kitem{\errmessage{@kitem while not in a table}} -\def\kitemx{\errmessage{@kitemx while not in a table}} -\def\xitem{\errmessage{@xitem while not in a table}} -\def\xitemx{\errmessage{@xitemx while not in a table}} - -% Contains a kludge to get @end[description] to work. -\def\description{\tablez{\dontindex}{1}{}{}{}{}} +\def\item{\errmessage{@item while not in a list environment}} +\def\itemx{\errmessage{@itemx while not in a list environment}} % @table, @ftable, @vtable. -\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} -{\obeylines\obeyspaces% -\gdef\tablex #1^^M{% -\tabley\dontindex#1 \endtabley}} - -\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex} -{\obeylines\obeyspaces% -\gdef\ftablex #1^^M{% -\tabley\fnitemindex#1 \endtabley -\def\Eftable{\endgraf\afterenvbreak\endgroup}% -\let\Etable=\relax}} - -\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex} -{\obeylines\obeyspaces% -\gdef\vtablex #1^^M{% -\tabley\vritemindex#1 \endtabley -\def\Evtable{\endgraf\afterenvbreak\endgroup}% -\let\Etable=\relax}} - -\def\dontindex #1{} -\def\fnitemindex #1{\doind {fn}{\code{#1}}}% -\def\vritemindex #1{\doind {vr}{\code{#1}}}% - -{\obeyspaces % -\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup% -\tablez{#1}{#2}{#3}{#4}{#5}{#6}}} - -\def\tablez #1#2#3#4#5#6{% -\aboveenvbreak % -\begingroup % -\def\Edescription{\Etable}% Necessary kludge. -\let\itemindex=#1% -\ifnum 0#3>0 \advance \leftskip by #3\mil \fi % -\ifnum 0#4>0 \tableindent=#4\mil \fi % -\ifnum 0#5>0 \advance \rightskip by #5\mil \fi % -\def\itemfont{#2}% -\itemmax=\tableindent % -\advance \itemmax by -\itemmargin % -\advance \leftskip by \tableindent % -\exdentamount=\tableindent -\parindent = 0pt -\parskip = \smallskipamount -\ifdim \parskip=0pt \parskip=2pt \fi% -\def\Etable{\endgraf\afterenvbreak\endgroup}% -\let\item = \internalBitem % -\let\itemx = \internalBitemx % -\let\kitem = \internalBkitem % -\let\kitemx = \internalBkitemx % -\let\xitem = \internalBxitem % -\let\xitemx = \internalBxitemx % +\envdef\table{% + \let\itemindex\gobble + \tablecheck{table}% +} +\envdef\ftable{% + \def\itemindex ##1{\doind {fn}{\code{##1}}}% + \tablecheck{ftable}% +} +\envdef\vtable{% + \def\itemindex ##1{\doind {vr}{\code{##1}}}% + \tablecheck{vtable}% +} +\def\tablecheck#1{% + \ifnum \the\catcode`\^^M=\active + \endgroup + \errmessage{This command won't work in this context; perhaps the problem is + that we are \inenvironment\thisenv}% + \def\next{\doignore{#1}}% + \else + \let\next\tablex + \fi + \next +} +\def\tablex#1{% + \def\itemindicate{#1}% + \parsearg\tabley +} +\def\tabley#1{% + {% + \makevalueexpandable + \edef\temp{\noexpand\tablez #1\space\space\space}% + \expandafter + }\temp \endtablez +} +\def\tablez #1 #2 #3 #4\endtablez{% + \aboveenvbreak + \ifnum 0#1>0 \advance \leftskip by #1\mil \fi + \ifnum 0#2>0 \tableindent=#2\mil \fi + \ifnum 0#3>0 \advance \rightskip by #3\mil \fi + \itemmax=\tableindent + \advance \itemmax by -\itemmargin + \advance \leftskip by \tableindent + \exdentamount=\tableindent + \parindent = 0pt + \parskip = \smallskipamount + \ifdim \parskip=0pt \parskip=2pt \fi + \let\item = \internalBitem + \let\itemx = \internalBitemx } +\def\Etable{\endgraf\afterenvbreak} +\let\Eftable\Etable +\let\Evtable\Etable +\let\Eitemize\Etable +\let\Eenumerate\Etable % This is the counter used by @enumerate, which is really @itemize \newcount \itemno -\def\itemize{\parsearg\itemizezzz} +\envdef\itemize{\parsearg\doitemize} -\def\itemizezzz #1{% - \begingroup % ended by the @end itemize - \itemizey {#1}{\Eitemize} -} - -\def\itemizey#1#2{% +\def\doitemize#1{% \aboveenvbreak \itemmax=\itemindent \advance\itemmax by -\itemmargin @@ -2144,13 +2539,33 @@ where each line of input produces a line of output.} \parindent=0pt \parskip=\smallskipamount \ifdim\parskip=0pt \parskip=2pt \fi - \def#2{\endgraf\afterenvbreak\endgroup}% \def\itemcontents{#1}% % @itemize with no arg is equivalent to @itemize @bullet. \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi \let\item=\itemizeitem } +% Definition of @item while inside @itemize and @enumerate. +% +\def\itemizeitem{% + \advance\itemno by 1 % for enumerations + {\let\par=\endgraf \smallbreak}% reasonable place to break + {% + % If the document has an @itemize directly after a section title, a + % \nobreak will be last on the list, and \sectionheading will have + % done a \vskip-\parskip. In that case, we don't want to zero + % parskip, or the item text will crash with the heading. On the + % other hand, when there is normal text preceding the item (as there + % usually is), we do want to zero parskip, or there would be too much + % space. In that case, we won't have a \nobreak before. At least + % that's the theory. + \ifnum\lastpenalty<10000 \parskip=0in \fi + \noindent + \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% + \vadjust{\penalty 1200}}% not good to break after first line of item. + \flushcr +} + % \splitoff TOKENS\endmark defines \first to be the first token in % TOKENS, and \rest to be the remainder. % @@ -2160,11 +2575,8 @@ where each line of input produces a line of output.} % or number, to specify the first label in the enumerated list. No % argument is the same as `1'. % -\def\enumerate{\parsearg\enumeratezzz} -\def\enumeratezzz #1{\enumeratey #1 \endenumeratey} +\envparseargdef\enumerate{\enumeratey #1 \endenumeratey} \def\enumeratey #1 #2\endenumeratey{% - \begingroup % ended by the @end enumerate - % % If we were given no argument, pretend we were given `1'. \def\thearg{#1}% \ifx\thearg\empty \def\thearg{1}\fi @@ -2235,13 +2647,13 @@ where each line of input produces a line of output.} }% } -% Call itemizey, adding a period to the first argument and supplying the +% Call \doitemize, adding a period to the first argument and supplying the % common last two arguments. Also subtract one from the initial value in % \itemno, since @item increments \itemno. % \def\startenumeration#1{% \advance\itemno by -1 - \itemizey{#1.}\Eenumerate\flushcr + \doitemize{#1.}\flushcr } % @alphaenumerate and @capsenumerate are abbreviations for giving an arg @@ -2252,16 +2664,6 @@ where each line of input produces a line of output.} \def\Ealphaenumerate{\Eenumerate} \def\Ecapsenumerate{\Eenumerate} -% Definition of @item while inside @itemize. - -\def\itemizeitem{% -\advance\itemno by 1 -{\let\par=\endgraf \smallbreak}% -\ifhmode \errmessage{In hmode at itemizeitem}\fi -{\parskip=0in \hskip 0pt -\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% -\vadjust{\penalty 1200}}% -\flushcr} % @multitable macros % Amy Hendrickson, 8/18/94, 3/6/96 @@ -2288,24 +2690,14 @@ where each line of input produces a line of output.} % @multitable {Column 1 template} {Column 2 template} {Column 3 template} % @item ... % using the widest term desired in each column. -% -% For those who want to use more than one line's worth of words in -% the preamble, break the line within one argument and it -% will parse correctly, i.e., -% -% @multitable {Column 1 template} {Column 2 template} {Column 3 -% template} -% Not: -% @multitable {Column 1 template} {Column 2 template} -% {Column 3 template} % Each new table line starts with @item, each subsequent new column % starts with @tab. Empty columns may be produced by supplying @tab's % with nothing between them for as many times as empty columns are needed, % ie, @tab@tab@tab will produce two empty columns. -% @item, @tab, @multitable or @end multitable do not need to be on their -% own lines, but it will not hurt if they are. +% @item, @tab do not need to be on their own lines, but it will not hurt +% if they are. % Sample multitable: @@ -2349,13 +2741,12 @@ where each line of input produces a line of output.} \def\xcolumnfractions{\columnfractions} \newif\ifsetpercent -% #1 is the part of the @columnfraction before the decimal point, which -% is presumably either 0 or the empty string (but we don't check, we -% just throw it away). #2 is the decimal part, which we use as the -% percent of \hsize for this column. -\def\pickupwholefraction#1.#2 {% +% #1 is the @columnfraction, usually a decimal number like .5, but might +% be just 1. We just use it, whatever it is. +% +\def\pickupwholefraction#1 {% \global\advance\colcount by 1 - \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% + \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% \setuptable } @@ -2388,18 +2779,33 @@ where each line of input produces a line of output.} \go } +% multitable-only commands. +% +% @headitem starts a heading row, which we typeset in bold. +% Assignments have to be global since we are inside the implicit group +% of an alignment entry. Note that \everycr resets \everytab. +\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}% +% +% A \tab used to include \hskip1sp. But then the space in a template +% line is not enough. That is bad. So let's go back to just `&' until +% we encounter the problem it was intended to solve again. +% --karl, nathan@acm.org, 20apr99. +\def\tab{\checkenv\multitable &\the\everytab}% + % @multitable ... @end multitable definitions: % -\def\multitable{\parsearg\dotable} -\def\dotable#1{\bgroup +\newtoks\everytab % insert after every tab. +% +\envdef\multitable{% \vskip\parskip - \let\item=\crcrwithfootnotes - % A \tab used to include \hskip1sp. But then the space in a template - % line is not enough. That is bad. So let's go back to just & until - % we encounter the problem it was intended to solve again. --karl, - % nathan@acm.org, 20apr99. - \let\tab=&% - \let\startfootins=\startsavedfootnote + \startsavinginserts + % + % @item within a multitable starts a normal row. + % We use \def instead of \let so that if one of the multitable entries + % contains an @itemize, we don't choke on the \item (seen as \crcr aka + % \endtemplate) expanding \doitemize. + \def\item{\crcr}% + % \tolerance=9500 \hbadness=9500 \setmultitablespacing @@ -2407,85 +2813,93 @@ where each line of input produces a line of output.} \parindent=\multitableparindent \overfullrule=0pt \global\colcount=0 - \def\Emultitable{% - \global\setpercentfalse - \crcrwithfootnotes\crcr - \egroup\egroup + % + \everycr = {% + \noalign{% + \global\everytab={}% + \global\colcount=0 % Reset the column counter. + % Check for saved footnotes, etc. + \checkinserts + % Keeps underfull box messages off when table breaks over pages. + %\filbreak + % Maybe so, but it also creates really weird page breaks when the + % table breaks over pages. Wouldn't \vfil be better? Wait until the + % problem manifests itself, so it can be fixed for real --karl. + }% }% % + \parsearg\domultitable +} +\def\domultitable#1{% % To parse everything between @multitable and @item: \setuptable#1 \endsetuptable % - % \everycr will reset column counter, \colcount, at the end of - % each line. Every column entry will cause \colcount to advance by one. - % The table preamble - % looks at the current \colcount to find the correct column width. - \everycr{\noalign{% - % - % \filbreak%% keeps underfull box messages off when table breaks over pages. - % Maybe so, but it also creates really weird page breaks when the table - % breaks over pages. Wouldn't \vfil be better? Wait until the problem - % manifests itself, so it can be fixed for real --karl. - \global\colcount=0\relax}}% - % % This preamble sets up a generic column definition, which will % be used as many times as user calls for columns. % \vtop will set a single line and will also let text wrap and % continue for many paragraphs if desired. - \halign\bgroup&\global\advance\colcount by 1\relax - \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname - % - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % - % If the user has set preamble in terms of percent of \hsize we will - % use that dimension as the width of the column, and the \leftskip - % will keep entries from bumping into each other. Table will start at - % left margin and final column will justify at right margin. - % - % Make sure we don't inherit \rightskip from the outer environment. - \rightskip=0pt - \ifnum\colcount=1 - % The first column will be indented with the surrounding text. - \advance\hsize by\leftskip - \else - \ifsetpercent \else - % If user has not set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace. - \advance\hsize by \multitablecolspace - \fi - % In either case we will make \leftskip=\multitablecolspace: - \leftskip=\multitablecolspace - \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively marking - % characters. - \noindent\ignorespaces##\unskip\multistrut}\cr -} - -\def\setmultitablespacing{% test to see if user has set \multitablelinespace. -% If so, do nothing. If not, give it an appropriate dimension based on -% current baselineskip. + \halign\bgroup &% + \global\advance\colcount by 1 + \multistrut + \vtop{% + % Use the current \colcount to find the correct column width: + \hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively + % marking characters. + \noindent\ignorespaces##\unskip\multistrut + }\cr +} +\def\Emultitable{% + \crcr + \egroup % end the \halign + \global\setpercentfalse +} + +\def\setmultitablespacing{% + \def\multistrut{\strut}% just use the standard line spacing + % + % Compute \multitablelinespace (if not defined by user) for use in + % \multitableparskip calculation. We used define \multistrut based on + % this, but (ironically) that caused the spacing to be off. + % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. \ifdim\multitablelinespace=0pt \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 -%% strut to put in table in case some entry doesn't have descenders, -%% to keep lines equally spaced -\let\multistrut = \strut -\else -%% FIXME: what is \box0 supposed to be? -\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 -width0pt\relax} \fi +\fi %% Test to see if parskip is larger than space between lines of %% table. If not, do nothing. %% If so, set to same dimension as multitablelinespace. @@ -2500,364 +2914,175 @@ width0pt\relax} \fi %% than skip between lines in the table. \fi} -% In case a @footnote appears inside an alignment, save the footnote -% text to a box and make the \insert when a row of the table is -% finished. Otherwise, the insertion is lost, it never migrates to the -% main vertical list. --kasal, 22jan03. -% -\newbox\savedfootnotes -% -% \dotable \let's \startfootins to this, so that \dofootnote will call -% it instead of starting the insertion right away. -\def\startsavedfootnote{% - \global\setbox\savedfootnotes = \vbox\bgroup - \unvbox\savedfootnotes -} -\def\crcrwithfootnotes{% - \crcr - \ifvoid\savedfootnotes \else - \noalign{\insert\footins{\box\savedfootnotes}}% - \fi -} \message{conditionals,} -% Prevent errors for section commands. -% Used in @ignore and in failing conditionals. -\def\ignoresections{% - \let\chapter=\relax - \let\unnumbered=\relax - \let\top=\relax - \let\unnumberedsec=\relax - \let\unnumberedsection=\relax - \let\unnumberedsubsec=\relax - \let\unnumberedsubsection=\relax - \let\unnumberedsubsubsec=\relax - \let\unnumberedsubsubsection=\relax - \let\section=\relax - \let\subsec=\relax - \let\subsubsec=\relax - \let\subsection=\relax - \let\subsubsection=\relax - \let\appendix=\relax - \let\appendixsec=\relax - \let\appendixsection=\relax - \let\appendixsubsec=\relax - \let\appendixsubsection=\relax - \let\appendixsubsubsec=\relax - \let\appendixsubsubsection=\relax - \let\contents=\relax - \let\smallbook=\relax - \let\titlepage=\relax -} - -% Used in nested conditionals, where we have to parse the Texinfo source -% and so want to turn off most commands, in case they are used -% incorrectly. -% -% We use \empty instead of \relax for the @def... commands, so that \end -% doesn't throw an error. For instance: -% @ignore -% @deffn ... -% @end deffn -% @end ignore -% -% The @end deffn is going to get expanded, because we're trying to allow -% nested conditionals. But we don't want to expand the actual @deffn, -% since it might be syntactically correct and intended to be ignored. -% Since \end checks for \relax, using \empty does not cause an error. -% -\def\ignoremorecommands{% - \let\defcodeindex = \relax - \let\defcv = \empty - \let\defcvx = \empty - \let\Edefcv = \empty - \let\deffn = \empty - \let\deffnx = \empty - \let\Edeffn = \empty - \let\defindex = \relax - \let\defivar = \empty - \let\defivarx = \empty - \let\Edefivar = \empty - \let\defmac = \empty - \let\defmacx = \empty - \let\Edefmac = \empty - \let\defmethod = \empty - \let\defmethodx = \empty - \let\Edefmethod = \empty - \let\defop = \empty - \let\defopx = \empty - \let\Edefop = \empty - \let\defopt = \empty - \let\defoptx = \empty - \let\Edefopt = \empty - \let\defspec = \empty - \let\defspecx = \empty - \let\Edefspec = \empty - \let\deftp = \empty - \let\deftpx = \empty - \let\Edeftp = \empty - \let\deftypefn = \empty - \let\deftypefnx = \empty - \let\Edeftypefn = \empty - \let\deftypefun = \empty - \let\deftypefunx = \empty - \let\Edeftypefun = \empty - \let\deftypeivar = \empty - \let\deftypeivarx = \empty - \let\Edeftypeivar = \empty - \let\deftypemethod = \empty - \let\deftypemethodx = \empty - \let\Edeftypemethod = \empty - \let\deftypeop = \empty - \let\deftypeopx = \empty - \let\Edeftypeop = \empty - \let\deftypevar = \empty - \let\deftypevarx = \empty - \let\Edeftypevar = \empty - \let\deftypevr = \empty - \let\deftypevrx = \empty - \let\Edeftypevr = \empty - \let\defun = \empty - \let\defunx = \empty - \let\Edefun = \empty - \let\defvar = \empty - \let\defvarx = \empty - \let\Edefvar = \empty - \let\defvr = \empty - \let\defvrx = \empty - \let\Edefvr = \empty - \let\clear = \relax - \let\down = \relax - \let\evenfooting = \relax - \let\evenheading = \relax - \let\everyfooting = \relax - \let\everyheading = \relax - \let\headings = \relax - \let\include = \relax - \let\item = \relax - \let\lowersections = \relax - \let\oddfooting = \relax - \let\oddheading = \relax - \let\printindex = \relax - \let\pxref = \relax - \let\raisesections = \relax - \let\ref = \relax - \let\set = \relax - \let\setchapternewpage = \relax - \let\setchapterstyle = \relax - \let\settitle = \relax - \let\up = \relax - \let\verbatiminclude = \relax - \let\xref = \relax + +% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext, +% @ifnotxml always succeed. They currently do nothing; we don't +% attempt to check whether the conditionals are properly nested. But we +% have to remember that they are conditionals, so that @end doesn't +% attempt to close an environment group. +% +\def\makecond#1{% + \expandafter\let\csname #1\endcsname = \relax + \expandafter\let\csname iscond.#1\endcsname = 1 } +\makecond{iftex} +\makecond{ifnotdocbook} +\makecond{ifnothtml} +\makecond{ifnotinfo} +\makecond{ifnotplaintext} +\makecond{ifnotxml} % Ignore @ignore, @ifhtml, @ifinfo, and the like. % \def\direntry{\doignore{direntry}} -\def\documentdescriptionword{documentdescription} \def\documentdescription{\doignore{documentdescription}} +\def\docbook{\doignore{docbook}} \def\html{\doignore{html}} +\def\ifdocbook{\doignore{ifdocbook}} \def\ifhtml{\doignore{ifhtml}} \def\ifinfo{\doignore{ifinfo}} -\def\ifnottex{\nestedignore{ifnottex}} +\def\ifnottex{\doignore{ifnottex}} \def\ifplaintext{\doignore{ifplaintext}} \def\ifxml{\doignore{ifxml}} \def\ignore{\doignore{ignore}} \def\menu{\doignore{menu}} \def\xml{\doignore{xml}} -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory = \comment - -% Ignore text until a line `@end #1'. +% Ignore text until a line `@end #1', keeping track of nested conditionals. % +% A count to remember the depth of nesting. +\newcount\doignorecount + \def\doignore#1{\begingroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define a command to swallow text until we reach `@end #1'. - % This @ is a catcode 12 token (that is the normal catcode of @ in - % this texinfo.tex file). We change the catcode of @ below to match. - \long\def\doignoretext##1@end #1{\enddoignore}% + % Scan in ``verbatim'' mode: + \obeylines + \catcode`\@ = \other + \catcode`\{ = \other + \catcode`\} = \other % % Make sure that spaces turn into tokens that match what \doignoretext wants. - \catcode\spaceChar = 10 + \spaceisspace % - % Ignore braces, too, so mismatched braces don't cause trouble. - \catcode`\{ = 9 - \catcode`\} = 9 - % - % We must not have @c interpreted as a control sequence. - \catcode`\@ = 12 - % - \def\ignoreword{#1}% - \ifx\ignoreword\documentdescriptionword - % The c kludge breaks documentdescription, since - % `documentdescription' contains a `c'. Means not everything will - % be ignored inside @documentdescription, but oh well... - \else - % Make the letter c a comment character so that the rest of the line - % will be ignored. This way, the document can have (for example) - % @c @end ifinfo - % and the @end ifinfo will be properly ignored. - % (We've just changed @ to catcode 12.) - \catcode`\c = 14 - \fi + % Count number of #1's that we've seen. + \doignorecount = 0 % - % And now expand the command defined above. - \doignoretext -} - -% What we do to finish off ignored text. -% -\def\enddoignore{\endgroup\ignorespaces}% - -\newif\ifwarnedobs\warnedobsfalse -\def\obstexwarn{% - \ifwarnedobs\relax\else - % We need to warn folks that they may have trouble with TeX 3.0. - % This uses \immediate\write16 rather than \message to get newlines. - \immediate\write16{} - \immediate\write16{WARNING: for users of Unix TeX 3.0!} - \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} - \immediate\write16{If you are running another version of TeX, relax.} - \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} - \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.org/non-gnu/TeX.README.)} - \immediate\write16{If you are stuck with version 3.0, run the} - \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} - \immediate\write16{ to use a workaround.} - \immediate\write16{} - \global\warnedobstrue - \fi + % Swallow text until we reach the matching `@end #1'. + \dodoignore{#1}% } -% **In TeX 3.0, setting text in \nullfont hangs tex. For a -% workaround (which requires the file ``dummy.tfm'' to be installed), -% uncomment the following line: -%%%%%\font\nullfont=dummy\let\obstexwarn=\relax - -% Ignore text, except that we keep track of conditional commands for -% purposes of nesting, up to an `@end #1' command. -% -\def\nestedignore#1{% - \obstexwarn - % We must actually expand the ignored text to look for the @end - % command, so that nested ignore constructs work. Thus, we put the - % text into a \vbox and then do nothing with the result. To minimize - % the chance of memory overflow, we follow the approach outlined on - % page 401 of the TeXbook. +{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. + \obeylines % % - \setbox0 = \vbox\bgroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define `@end #1' to end the box, which will in turn undefine the - % @end command again. - \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% - % - % We are going to be parsing Texinfo commands. Most cause no - % trouble when they are used incorrectly, but some commands do - % complicated argument parsing or otherwise get confused, so we - % undefine them. - % - % We can't do anything about stray @-signs, unfortunately; - % they'll produce `undefined control sequence' errors. - \ignoremorecommands - % - % Set the current font to be \nullfont, a TeX primitive, and define - % all the font commands to also use \nullfont. We don't use - % dummy.tfm, as suggested in the TeXbook, because some sites - % might not have that installed. Therefore, math mode will still - % produce output, but that should be an extremely small amount of - % stuff compared to the main input. + \gdef\dodoignore#1{% + % #1 contains the command name as a string, e.g., `ifinfo'. % - \nullfont - \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont - \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont - \let\tensf=\nullfont - % Similarly for index fonts. - \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont - \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont - \let\smallsf=\nullfont - % Similarly for smallexample fonts. - \let\smallerrm=\nullfont \let\smallerit=\nullfont \let\smallersl=\nullfont - \let\smallerbf=\nullfont \let\smallertt=\nullfont \let\smallersc=\nullfont - \let\smallersf=\nullfont + % Define a command to find the next `@end #1'. + \long\def\doignoretext##1^^M@end #1{% + \doignoretextyyy##1^^M@#1\_STOP_}% % - % Don't complain when characters are missing from the fonts. - \tracinglostchars = 0 + % And this command to find another #1 command, at the beginning of a + % line. (Otherwise, we would consider a line `@c @ifset', for + % example, to count as an @ifset for nesting.) + \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% % - % Don't bother to do space factor calculations. - \frenchspacing - % - % Don't report underfull hboxes. - \hbadness = 10000 - % - % Do minimal line-breaking. - \pretolerance = 10000 - % - % Do not execute instructions in @tex. - \def\tex{\doignore{tex}}% - % Do not execute macro definitions. - % `c' is a comment character, so the word `macro' will get cut off. - \def\macro{\doignore{ma}}% + % And now expand that command. + \doignoretext ^^M% + }% +} + +\def\doignoreyyy#1{% + \def\temp{#1}% + \ifx\temp\empty % Nothing found. + \let\next\doignoretextzzz + \else % Found a nested condition, ... + \advance\doignorecount by 1 + \let\next\doignoretextyyy % ..., look for another. + % If we're here, #1 ends with ^^M\ifinfo (for example). + \fi + \next #1% the token \_STOP_ is present just after this macro. } +% We have to swallow the remaining "\_STOP_". +% +\def\doignoretextzzz#1{% + \ifnum\doignorecount = 0 % We have just found the outermost @end. + \let\next\enddoignore + \else % Still inside a nested condition. + \advance\doignorecount by -1 + \let\next\doignoretext % Look for the next @end. + \fi + \next +} + +% Finish off ignored text. +{ \obeylines% + % Ignore anything after the last `@end #1'; this matters in verbatim + % environments, where otherwise the newline after an ignored conditional + % would result in a blank line in the output. + \gdef\enddoignore#1^^M{\endgroup\ignorespaces}% +} + + % @set VAR sets the variable VAR to an empty value. % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. % % Since we want to separate VAR from REST-OF-LINE (which might be % empty), we can't just use \parsearg; we have to insert a space of our % own to delimit the rest of the line, and then take it out again if we -% didn't need it. Make sure the catcode of space is correct to avoid -% losing inside @example, for instance. +% didn't need it. +% We rely on the fact that \parsearg sets \catcode`\ =10. % -\def\set{\begingroup\catcode` =10 - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \parsearg\setxxx} -\def\setxxx#1{\setyyy#1 \endsetyyy} +\parseargdef\set{\setyyy#1 \endsetyyy} \def\setyyy#1 #2\endsetyyy{% - \def\temp{#2}% - \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty - \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. - \fi - \endgroup + {% + \makevalueexpandable + \def\temp{#2}% + \edef\next{\gdef\makecsname{SET#1}}% + \ifx\temp\empty + \next{}% + \else + \setzzz#2\endsetzzz + \fi + }% } -% Can't use \xdef to pre-expand #2 and save some time, since \temp or -% \next or other control sequences that we've defined might get us into -% an infinite loop. Consider `@set foo @cite{bar}'. -\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} +% Remove the trailing space \setxxx inserted. +\def\setzzz#1 \endsetzzz{\next{#1}} % @clear VAR clears (i.e., unsets) the variable VAR. % -\def\clear{\parsearg\clearxxx} -\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} +\parseargdef\clear{% + {% + \makevalueexpandable + \global\expandafter\let\csname SET#1\endcsname=\relax + }% +} % @value{foo} gets the text saved in variable foo. +\def\value{\begingroup\makevalueexpandable\valuexxx} +\def\valuexxx#1{\expandablevalue{#1}\endgroup} { - \catcode`\_ = \active + \catcode`\- = \active \catcode`\_ = \active % - % We might end up with active _ or - characters in the argument if - % we're called from @code, as @code{@value{foo-bar_}}. So \let any - % such active characters to their normal equivalents. - \gdef\value{\begingroup + \gdef\makevalueexpandable{% + \let\value = \expandablevalue + % We don't want these characters active, ... \catcode`\-=\other \catcode`\_=\other - \indexbreaks \let_\normalunderscore - \valuexxx} + % ..., but we might end up with active ones in the argument if + % we're called from @code, as @code{@value{foo-bar_}}, though. + % So \let them to their normal equivalents. + \let-\realdash \let_\normalunderscore + } } -\def\valuexxx#1{\expandablevalue{#1}\endgroup} % We have this subroutine so that we can handle at least some @value's -% properly in indexes (we \let\value to this in \indexdummies). Ones -% whose names contain - or _ still won't work, but we can't do anything -% about that. The command has to be fully expandable (if the variable -% is set), since the result winds up in the index file. This means that -% if the variable's value contains other Texinfo commands, it's almost -% certain it will fail (although perhaps we could fix that with -% sufficient work to do a one-level expansion on the result, instead of -% complete). +% properly in indexes (we call \makevalueexpandable in \indexdummies). +% The command has to be fully expandable (if the variable is set), since +% the result winds up in the index file. This means that if the +% variable's value contains other Texinfo commands, it's almost certain +% it will fail (although perhaps we could fix that with sufficient work +% to do a one-level expansion on the result, instead of complete). % \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax @@ -2871,55 +3096,36 @@ width0pt\relax} \fi % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. % -\def\ifset{\parsearg\doifset} -\def\doifset#1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \let\next=\ifsetfail - \else - \let\next=\ifsetsucceed - \fi - \next +% To get special treatment of `@end ifset,' call \makeond and the redefine. +% +\makecond{ifset} +\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} +\def\doifset#1#2{% + {% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname SET#2\endcsname\relax + #1% If not set, redefine \next. + \fi + \expandafter + }\next } -\def\ifsetsucceed{\conditionalsucceed{ifset}} -\def\ifsetfail{\nestedignore{ifset}} -\defineunmatchedend{ifset} +\def\ifsetfail{\doignore{ifset}} % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been % defined with @set, or has been undefined with @clear. % -\def\ifclear{\parsearg\doifclear} -\def\doifclear#1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \let\next=\ifclearsucceed - \else - \let\next=\ifclearfail - \fi - \next -} -\def\ifclearsucceed{\conditionalsucceed{ifclear}} -\def\ifclearfail{\nestedignore{ifclear}} -\defineunmatchedend{ifclear} - -% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we -% read the text following, through the first @end iftex (etc.). Make -% `@end iftex' (etc.) valid only after an @iftex. +% The `\else' inside the `\doifset' parameter is a trick to reuse the +% above code: if the variable is not set, do nothing, if it is set, +% then redefine \next to \ifclearfail. % -\def\iftex{\conditionalsucceed{iftex}} -\def\ifnothtml{\conditionalsucceed{ifnothtml}} -\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} -\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}} -\defineunmatchedend{iftex} -\defineunmatchedend{ifnothtml} -\defineunmatchedend{ifnotinfo} -\defineunmatchedend{ifnotplaintext} +\makecond{ifclear} +\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} +\def\ifclearfail{\doignore{ifclear}} -% True conditional. Since \set globally defines its variables, we can -% just start and end a group (to keep the @end definition undefined at -% the outer level). -% -\def\conditionalsucceed#1{\begingroup - \expandafter\def\csname E#1\endcsname{\endgroup}% -} +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory=\comment % @defininfoenclose. \let\definfoenclose=\comment @@ -2929,9 +3135,8 @@ width0pt\relax} \fi % Index generation facilities % Define \newwrite to be identical to plain tex's \newwrite -% except not \outer, so it can be used within \newindex. -{\catcode`\@=11 -\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} +% except not \outer, so it can be used within macros and \if's. +\edef\newwrite{\makecsname{ptexnewwrite}} % \newindex {foo} defines an index named foo. % It automatically defines \fooindex such that @@ -3017,6 +3222,7 @@ width0pt\relax} \fi % we have to laboriously prevent expansion for those that we don't. % \def\indexdummies{% + \escapechar = `\\ % use backslash in output files. \def\@{@}% change to @@ when we switch to @ as escape char in index files. \def\ {\realbackslash\space }% % Need these in case \tex is in effect and \{ is a \delimiter again. @@ -3025,33 +3231,14 @@ width0pt\relax} \fi \let\{ = \mylbrace \let\} = \myrbrace % - % \definedummyword defines \#1 as \realbackslash #1\space, thus - % effectively preventing its expansion. This is used only for control - % words, not control letters, because the \space would be incorrect - % for control characters, but is needed to separate the control word - % from whatever follows. - % - % For control letters, we have \definedummyletter, which omits the - % space. - % - % These can be used both for control words that take an argument and - % those that do not. If it is followed by {arg} in the input, then - % that will dutifully get written to the index (or wherever). - % - \def\definedummyword##1{% - \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}% - }% - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{\realbackslash ##1}% - }% - % % Do the redefinitions. \commondummies } -% For the aux file, @ is the escape character. So we want to redefine -% everything using @ instead of \realbackslash. When everything uses -% @, this will be simpler. +% For the aux and toc files, @ is the escape character. So we want to +% redefine everything using @ as the escape character (instead of +% \realbackslash, still used for index files). When everything uses @, +% this will be simpler. % \def\atdummies{% \def\@{@@}% @@ -3059,160 +3246,179 @@ width0pt\relax} \fi \let\{ = \lbraceatcmd \let\} = \rbraceatcmd % - % (See comments in \indexdummies.) - \def\definedummyword##1{% - \expandafter\def\csname ##1\endcsname{@##1\space}% - }% - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{@##1}% - }% - % % Do the redefinitions. \commondummies + \otherbackslash } -% Called from \indexdummies and \atdummies. \definedummyword and -% \definedummyletter must be defined first. +% Called from \indexdummies and \atdummies. % \def\commondummies{% % - \normalturnoffactive + % \definedummyword defines \#1 as \string\#1\space, thus effectively + % preventing its expansion. This is used only for control% words, + % not control letters, because the \space would be incorrect for + % control characters, but is needed to separate the control word + % from whatever follows. % - % Control letters and accents. - \definedummyletter{_}% - \definedummyletter{,}% - \definedummyletter{"}% - \definedummyletter{`}% - \definedummyletter{'}% - \definedummyletter{^}% - \definedummyletter{~}% - \definedummyletter{=}% - \definedummyword{u}% - \definedummyword{v}% - \definedummyword{H}% - \definedummyword{dotaccent}% - \definedummyword{ringaccent}% - \definedummyword{tieaccent}% - \definedummyword{ubaraccent}% - \definedummyword{udotaccent}% - \definedummyword{dotless}% - % - % Other non-English letters. - \definedummyword{AA}% - \definedummyword{AE}% - \definedummyword{L}% - \definedummyword{OE}% - \definedummyword{O}% - \definedummyword{aa}% - \definedummyword{ae}% - \definedummyword{l}% - \definedummyword{oe}% - \definedummyword{o}% - \definedummyword{ss}% + % For control letters, we have \definedummyletter, which omits the + % space. % - % Although these internal commands shouldn't show up, sometimes they do. - \definedummyword{bf}% - \definedummyword{gtr}% - \definedummyword{hat}% - \definedummyword{less}% - \definedummyword{sf}% - \definedummyword{sl}% - \definedummyword{tclose}% - \definedummyword{tt}% + % These can be used both for control words that take an argument and + % those that do not. If it is followed by {arg} in the input, then + % that will dutifully get written to the index (or wherever). % - % Texinfo font commands. - \definedummyword{b}% - \definedummyword{i}% - \definedummyword{r}% - \definedummyword{sc}% - \definedummyword{t}% - % - \definedummyword{TeX}% - \definedummyword{acronym}% - \definedummyword{cite}% - \definedummyword{code}% - \definedummyword{command}% - \definedummyword{dfn}% - \definedummyword{dots}% - \definedummyword{emph}% - \definedummyword{env}% - \definedummyword{file}% - \definedummyword{kbd}% - \definedummyword{key}% - \definedummyword{math}% - \definedummyword{option}% - \definedummyword{samp}% - \definedummyword{strong}% - \definedummyword{uref}% - \definedummyword{url}% - \definedummyword{var}% - \definedummyword{w}% + \def\definedummyword ##1{\def##1{\string##1\space}}% + \def\definedummyletter##1{\def##1{\string##1}}% + \let\definedummyaccent\definedummyletter + % + \commondummiesnofonts + % + \definedummyletter\_% + % + % Non-English letters. + \definedummyword\AA + \definedummyword\AE + \definedummyword\L + \definedummyword\OE + \definedummyword\O + \definedummyword\aa + \definedummyword\ae + \definedummyword\l + \definedummyword\oe + \definedummyword\o + \definedummyword\ss + \definedummyword\exclamdown + \definedummyword\questiondown + \definedummyword\ordf + \definedummyword\ordm + % + % Although these internal commands shouldn't show up, sometimes they do. + \definedummyword\bf + \definedummyword\gtr + \definedummyword\hat + \definedummyword\less + \definedummyword\sf + \definedummyword\sl + \definedummyword\tclose + \definedummyword\tt + % + \definedummyword\LaTeX + \definedummyword\TeX % % Assorted special characters. - \definedummyword{bullet}% - \definedummyword{copyright}% - \definedummyword{dots}% - \definedummyword{enddots}% - \definedummyword{equiv}% - \definedummyword{error}% - \definedummyword{expansion}% - \definedummyword{minus}% - \definedummyword{pounds}% - \definedummyword{point}% - \definedummyword{print}% - \definedummyword{result}% - % - % Handle some cases of @value -- where the variable name does not - % contain - or _, and the value does not contain any - % (non-fully-expandable) commands. - \let\value = \expandablevalue + \definedummyword\bullet + \definedummyword\comma + \definedummyword\copyright + \definedummyword\registeredsymbol + \definedummyword\dots + \definedummyword\enddots + \definedummyword\equiv + \definedummyword\error + \definedummyword\euro + \definedummyword\expansion + \definedummyword\minus + \definedummyword\pounds + \definedummyword\point + \definedummyword\print + \definedummyword\result + % + % We want to disable all macros so that they are not expanded by \write. + \macrolist % - % Normal spaces, not active ones. - \unsepspaces + \normalturnoffactive % - % No macro expansion. - \turnoffmacros + % Handle some cases of @value -- where it does not contain any + % (non-fully-expandable) commands. + \makevalueexpandable } -% If an index command is used in an @example environment, any spaces -% therein should become regular spaces in the raw index file, not the -% expansion of \tie (\leavevmode \penalty \@M \ ). -{\obeyspaces - \gdef\unsepspaces{\obeyspaces\let =\space}} - +% \commondummiesnofonts: common to \commondummies and \indexnofonts. +% +\def\commondummiesnofonts{% + % Control letters and accents. + \definedummyletter\!% + \definedummyaccent\"% + \definedummyaccent\'% + \definedummyletter\*% + \definedummyaccent\,% + \definedummyletter\.% + \definedummyletter\/% + \definedummyletter\:% + \definedummyaccent\=% + \definedummyletter\?% + \definedummyaccent\^% + \definedummyaccent\`% + \definedummyaccent\~% + \definedummyword\u + \definedummyword\v + \definedummyword\H + \definedummyword\dotaccent + \definedummyword\ringaccent + \definedummyword\tieaccent + \definedummyword\ubaraccent + \definedummyword\udotaccent + \definedummyword\dotless + % + % Texinfo font commands. + \definedummyword\b + \definedummyword\i + \definedummyword\r + \definedummyword\sc + \definedummyword\t + % + % Commands that take arguments. + \definedummyword\acronym + \definedummyword\cite + \definedummyword\code + \definedummyword\command + \definedummyword\dfn + \definedummyword\emph + \definedummyword\env + \definedummyword\file + \definedummyword\kbd + \definedummyword\key + \definedummyword\math + \definedummyword\option + \definedummyword\pxref + \definedummyword\ref + \definedummyword\samp + \definedummyword\strong + \definedummyword\tie + \definedummyword\uref + \definedummyword\url + \definedummyword\var + \definedummyword\verb + \definedummyword\w + \definedummyword\xref +} % \indexnofonts is used when outputting the strings to sort the index % by, and when constructing control sequence names. It eliminates all % control sequences and just writes whatever the best ASCII sort string % would be for a given command (usually its argument). % -\def\indexdummytex{TeX} -\def\indexdummydots{...} -% \def\indexnofonts{% + % Accent commands should become @asis. + \def\definedummyaccent##1{\let##1\asis}% + % We can just ignore other control letters. + \def\definedummyletter##1{\let##1\empty}% + % Hopefully, all control words can become @asis. + \let\definedummyword\definedummyaccent + % + \commondummiesnofonts + % + % Don't no-op \tt, since it isn't a user-level command + % and is used in the definitions of the active chars like <, >, |, etc. + % Likewise with the other plain tex font commands. + %\let\tt=\asis + % \def\ { }% \def\@{@}% % how to handle braces? \def\_{\normalunderscore}% % - \let\,=\asis - \let\"=\asis - \let\`=\asis - \let\'=\asis - \let\^=\asis - \let\~=\asis - \let\==\asis - \let\u=\asis - \let\v=\asis - \let\H=\asis - \let\dotaccent=\asis - \let\ringaccent=\asis - \let\tieaccent=\asis - \let\ubaraccent=\asis - \let\udotaccent=\asis - \let\dotless=\asis - % - % Other non-English letters. + % Non-English letters. \def\AA{AA}% \def\AE{AE}% \def\L{L}% @@ -3226,130 +3432,178 @@ width0pt\relax} \fi \def\ss{ss}% \def\exclamdown{!}% \def\questiondown{?}% + \def\ordf{a}% + \def\ordm{o}% % - % Don't no-op \tt, since it isn't a user-level command - % and is used in the definitions of the active chars like <, >, |, etc. - % Likewise with the other plain tex font commands. - %\let\tt=\asis + \def\LaTeX{LaTeX}% + \def\TeX{TeX}% % - % Texinfo font commands. - \let\b=\asis - \let\i=\asis - \let\r=\asis - \let\sc=\asis - \let\t=\asis - % - \let\TeX=\indexdummytex - \let\acronym=\asis - \let\cite=\asis - \let\code=\asis - \let\command=\asis - \let\dfn=\asis - \let\dots=\indexdummydots - \let\emph=\asis - \let\env=\asis - \let\file=\asis - \let\kbd=\asis - \let\key=\asis - \let\math=\asis - \let\option=\asis - \let\samp=\asis - \let\strong=\asis - \let\uref=\asis - \let\url=\asis - \let\var=\asis - \let\w=\asis + % Assorted special characters. + % (The following {} will end up in the sort string, but that's ok.) + \def\bullet{bullet}% + \def\comma{,}% + \def\copyright{copyright}% + \def\registeredsymbol{R}% + \def\dots{...}% + \def\enddots{...}% + \def\equiv{==}% + \def\error{error}% + \def\euro{euro}% + \def\expansion{==>}% + \def\minus{-}% + \def\pounds{pounds}% + \def\point{.}% + \def\print{-|}% + \def\result{=>}% + % + % We need to get rid of all macros, leaving only the arguments (if present). + % Of course this is not nearly correct, but it is the best we can do for now. + % makeinfo does not expand macros in the argument to @deffn, which ends up + % writing an index entry, and texindex isn't prepared for an index sort entry + % that starts with \. + % + % Since macro invocations are followed by braces, we can just redefine them + % to take a single TeX argument. The case of a macro invocation that + % goes to end-of-line is not handled. + % + \macrolist } \let\indexbackslash=0 %overridden during \printindex. \let\SETmarginindex=\relax % put index entries in margin (undocumented)? -% For \ifx comparisons. -\def\emptymacro{\empty} - % Most index entries go through here, but \dosubind is the general case. -% -\def\doind#1#2{\dosubind{#1}{#2}\empty} +% #1 is the index name, #2 is the entry text. +\def\doind#1#2{\dosubind{#1}{#2}{}} % Workhorse for all \fooindexes. % #1 is name of index, #2 is stuff to put there, #3 is subentry -- -% \empty if called from \doind, as we usually are. The main exception -% is with defuns, which call us directly. +% empty if called from \doind, as we usually are (the main exception +% is with most defuns, which call us directly). % \def\dosubind#1#2#3{% + \iflinks + {% + % Store the main index entry text (including the third arg). + \toks0 = {#2}% + % If third arg is present, precede it with a space. + \def\thirdarg{#3}% + \ifx\thirdarg\empty \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + \edef\writeto{\csname#1indfile\endcsname}% + % + \ifvmode + \dosubindsanitize + \else + \dosubindwrite + \fi + }% + \fi +} + +% Write the entry in \toks0 to the index file: +% +\def\dosubindwrite{% % Put the index entry in the margin if desired. \ifx\SETmarginindex\relax\else - \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}% + \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% \fi - {% - \count255=\lastpenalty - {% - \indexdummies % Must do this here, since \bf, etc expand at this stage - \escapechar=`\\ - {% - \let\folio = 0% We will expand all macros now EXCEPT \folio. - \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now - % so it will be output as is; and it will print as backslash. - % - % The main index entry text. - \toks0 = {#2}% - % - % If third arg is present, precede it with space in sort key. - \def\thirdarg{#3}% - \ifx\thirdarg\emptymacro \else - % If the third (subentry) arg is present, add it to the index - % line to write. - \toks0 = \expandafter{\the\toks0 \space #3}% - \fi - % - % Process the index entry with all font commands turned off, to - % get the string to sort by. - {\indexnofonts - \edef\temp{\the\toks0}% need full expansion - \xdef\indexsorttmp{\temp}% - }% - % - % Set up the complete index entry, with both the sort key and - % the original text, including any font commands. We write - % three arguments to \entry to the .?? file (four in the - % subentry case), texindex reduces to two when writing the .??s - % sorted result. - \edef\temp{% - \write\csname#1indfile\endcsname{% - \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}% - }% - % - % If a skip is the last thing on the list now, preserve it - % by backing up by \lastskip, doing the \write, then inserting - % the skip again. Otherwise, the whatsit generated by the - % \write will make \lastskip zero. The result is that sequences - % like this: - % @end defun - % @tindex whatever - % @defun ... - % will have extra space inserted, because the \medbreak in the - % start of the @defun won't see the skip inserted by the @end of - % the previous defun. - % - % But don't do any of this if we're not in vertical mode. We - % don't want to do a \vskip and prematurely end a paragraph. - % - % Avoid page breaks due to these extra skips, too. - % - \iflinks - \ifvmode - \skip0 = \lastskip - \ifdim\lastskip = 0pt \else \nobreak\vskip-\skip0 \fi - \fi - % - \temp % do the write - % - \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi - \fi - }% - }% - \penalty\count255 + % + % Remember, we are within a group. + \indexdummies % Must do this here, since \bf, etc expand at this stage + \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now + % so it will be output as is; and it will print as backslash. + % + % Process the index entry with all font commands turned off, to + % get the string to sort by. + {\indexnofonts + \edef\temp{\the\toks0}% need full expansion + \xdef\indexsorttmp{\temp}% + }% + % + % Set up the complete index entry, with both the sort key and + % the original text, including any font commands. We write + % three arguments to \entry to the .?? file (four in the + % subentry case), texindex reduces to two when writing the .??s + % sorted result. + \edef\temp{% + \write\writeto{% + \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}% }% + \temp +} + +% Take care of unwanted page breaks: +% +% If a skip is the last thing on the list now, preserve it +% by backing up by \lastskip, doing the \write, then inserting +% the skip again. Otherwise, the whatsit generated by the +% \write will make \lastskip zero. The result is that sequences +% like this: +% @end defun +% @tindex whatever +% @defun ... +% will have extra space inserted, because the \medbreak in the +% start of the @defun won't see the skip inserted by the @end of +% the previous defun. +% +% But don't do any of this if we're not in vertical mode. We +% don't want to do a \vskip and prematurely end a paragraph. +% +% Avoid page breaks due to these extra skips, too. +% +% But wait, there is a catch there: +% We'll have to check whether \lastskip is zero skip. \ifdim is not +% sufficient for this purpose, as it ignores stretch and shrink parts +% of the skip. The only way seems to be to check the textual +% representation of the skip. +% +% The following is almost like \def\zeroskipmacro{0.0pt} except that +% the ``p'' and ``t'' characters have catcode \other, not 11 (letter). +% +\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} +% +% ..., ready, GO: +% +\def\dosubindsanitize{% + % \lastskip and \lastpenalty cannot both be nonzero simultaneously. + \skip0 = \lastskip + \edef\lastskipmacro{\the\lastskip}% + \count255 = \lastpenalty + % + % If \lastskip is nonzero, that means the last item was a + % skip. And since a skip is discardable, that means this + % -\skip0 glue we're inserting is preceded by a + % non-discardable item, therefore it is not a potential + % breakpoint, therefore no \nobreak needed. + \ifx\lastskipmacro\zeroskipmacro + \else + \vskip-\skip0 + \fi + % + \dosubindwrite + % + \ifx\lastskipmacro\zeroskipmacro + % If \lastskip was zero, perhaps the last item was a penalty, and + % perhaps it was >=10000, e.g., a \nobreak. In that case, we want + % to re-insert the same penalty (values >10000 are used for various + % signals); since we just inserted a non-discardable item, any + % following glue (such as a \parskip) would be a breakpoint. For example: + % + % @deffn deffn-whatever + % @vindex index-whatever + % Description. + % would allow a break between the index-whatever whatsit + % and the "Description." paragraph. + \ifnum\count255>9999 \penalty\count255 \fi + \else + % On the other hand, if we had a nonzero \lastskip, + % this make-up glue would be preceded by a non-discardable item + % (the whatsit from the \write), so we must insert a \nobreak. + \nobreak\vskip\skip0 + \fi } % The index entry written in the file actually looks like @@ -3387,14 +3641,12 @@ width0pt\relax} \fi % @printindex causes a particular index (the ??s file) to get printed. % It does not print any chapter heading (usually an @unnumbered). % -\def\printindex{\parsearg\doprintindex} -\def\doprintindex#1{\begingroup +\parseargdef\printindex{\begingroup \dobreak \chapheadingskip{10000}% % \smallfonts \rm \tolerance = 9500 \everypar = {}% don't want the \kern\-parindent from indentation suppression. - \indexbreaks % % See if the index file exists and is nonempty. % Change catcode of @ here so that if the index file contains @@ -3421,7 +3673,7 @@ width0pt\relax} \fi % Index files are almost Texinfo source, but we use \ as the escape % character. It would be better to use @, but that's too big a change % to make right now. - \def\indexbackslash{\rawbackslashxx}% + \def\indexbackslash{\backslashcurfont}% \catcode`\\ = 0 \escapechar = `\\ \begindoublecolumns @@ -3443,7 +3695,10 @@ width0pt\relax} \fi \removelastskip % % We like breaks before the index initials, so insert a bonus. - \penalty -300 + \nobreak + \vskip 0pt plus 3\baselineskip + \penalty 0 + \vskip 0pt plus -3\baselineskip % % Typeset the initial. Making this add up to a whole number of % baselineskips increases the chance of the dots lining up from column @@ -3453,80 +3708,100 @@ width0pt\relax} \fi % No shrink because it confuses \balancecolumns. \vskip 1.67\baselineskip plus .5\baselineskip \leftline{\secbf #1}% - \vskip .33\baselineskip plus .1\baselineskip - % % Do our best not to break after the initial. \nobreak + \vskip .33\baselineskip plus .1\baselineskip }} -% This typesets a paragraph consisting of #1, dot leaders, and then #2 -% flush to the right margin. It is used for index and table of contents -% entries. The paragraph is indented by \leftskip. +% \entry typesets a paragraph consisting of the text (#1), dot leaders, and +% then page number (#2) flushed to the right margin. It is used for index +% and table of contents entries. The paragraph is indented by \leftskip. % -\def\entry#1#2{\begingroup - % - % Start a new paragraph if necessary, so our assignments below can't - % affect previous text. - \par - % - % Do not fill out the last line with white space. - \parfillskip = 0in - % - % No extra space above this paragraph. - \parskip = 0in - % - % Do not prefer a separate line ending with a hyphen to fewer lines. - \finalhyphendemerits = 0 - % - % \hangindent is only relevant when the entry text and page number - % don't both fit on one line. In that case, bob suggests starting the - % dots pretty far over on the line. Unfortunately, a large - % indentation looks wrong when the entry text itself is broken across - % lines. So we use a small indentation and put up with long leaders. - % - % \hangafter is reset to 1 (which is the value we want) at the start - % of each paragraph, so we need not do anything with that. - \hangindent = 2em - % - % When the entry text needs to be broken, just fill out the first line - % with blank space. - \rightskip = 0pt plus1fil - % - % A bit of stretch before each entry for the benefit of balancing columns. - \vskip 0pt plus1pt - % - % Start a ``paragraph'' for the index entry so the line breaking - % parameters we've set above will have an effect. - \noindent - % - % Insert the text of the index entry. TeX will do line-breaking on it. - #1% - % The following is kludged to not output a line of dots in the index if - % there are no page numbers. The next person who breaks this will be - % cursed by a Unix daemon. - \def\tempa{{\rm }}% - \def\tempb{#2}% - \edef\tempc{\tempa}% - \edef\tempd{\tempb}% - \ifx\tempc\tempd\ \else% +% A straightforward implementation would start like this: +% \def\entry#1#2{... +% But this frozes the catcodes in the argument, and can cause problems to +% @code, which sets - active. This problem was fixed by a kludge--- +% ``-'' was active throughout whole index, but this isn't really right. +% +% The right solution is to prevent \entry from swallowing the whole text. +% --kasal, 21nov03 +\def\entry{% + \begingroup + % + % Start a new paragraph if necessary, so our assignments below can't + % affect previous text. + \par + % + % Do not fill out the last line with white space. + \parfillskip = 0in + % + % No extra space above this paragraph. + \parskip = 0in + % + % Do not prefer a separate line ending with a hyphen to fewer lines. + \finalhyphendemerits = 0 + % + % \hangindent is only relevant when the entry text and page number + % don't both fit on one line. In that case, bob suggests starting the + % dots pretty far over on the line. Unfortunately, a large + % indentation looks wrong when the entry text itself is broken across + % lines. So we use a small indentation and put up with long leaders. % - % If we must, put the page number on a line of its own, and fill out - % this line with blank space. (The \hfil is overwhelmed with the - % fill leaders glue in \indexdotfill if the page number does fit.) - \hfil\penalty50 - \null\nobreak\indexdotfill % Have leaders before the page number. + % \hangafter is reset to 1 (which is the value we want) at the start + % of each paragraph, so we need not do anything with that. + \hangindent = 2em % - % The `\ ' here is removed by the implicit \unskip that TeX does as - % part of (the primitive) \par. Without it, a spurious underfull - % \hbox ensues. - \ifpdf - \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. + % When the entry text needs to be broken, just fill out the first line + % with blank space. + \rightskip = 0pt plus1fil + % + % A bit of stretch before each entry for the benefit of balancing + % columns. + \vskip 0pt plus1pt + % + % Swallow the left brace of the text (first parameter): + \afterassignment\doentry + \let\temp = +} +\def\doentry{% + \bgroup % Instead of the swallowed brace. + \noindent + \aftergroup\finishentry + % And now comes the text of the entry. +} +\def\finishentry#1{% + % #1 is the page number. + % + % The following is kludged to not output a line of dots in the index if + % there are no page numbers. The next person who breaks this will be + % cursed by a Unix daemon. + \def\tempa{{\rm }}% + \def\tempb{#1}% + \edef\tempc{\tempa}% + \edef\tempd{\tempb}% + \ifx\tempc\tempd + \ % \else - \ #2% The page number ends the paragraph. + % + % If we must, put the page number on a line of its own, and fill out + % this line with blank space. (The \hfil is overwhelmed with the + % fill leaders glue in \indexdotfill if the page number does fit.) + \hfil\penalty50 + \null\nobreak\indexdotfill % Have leaders before the page number. + % + % The `\ ' here is removed by the implicit \unskip that TeX does as + % part of (the primitive) \par. Without it, a spurious underfull + % \hbox ensues. + \ifpdf + \pdfgettoks#1.% + \ \the\toksA + \else + \ #1% + \fi \fi - \fi% - \par -\endgroup} + \par + \endgroup +} % Like \dotfill except takes at least 1 em. \def\indexdotfill{\cleaders @@ -3695,6 +3970,12 @@ width0pt\relax} \fi \message{sectioning,} % Chapters, sections, etc. +% \unnumberedno is an oxymoron, of course. But we count the unnumbered +% sections so that we can refer to them unambiguously in the pdf +% outlines by their "section number". We avoid collisions with chapter +% numbers by starting them at 10000. (If a document ever has 10000 +% chapters, we're in trouble anyway, I'm sure.) +\newcount\unnumberedno \unnumberedno = 10000 \newcount\chapno \newcount\secno \secno=0 \newcount\subsecno \subsecno=0 @@ -3702,9 +3983,12 @@ width0pt\relax} \fi % This counter is funny since it counts through charcodes of letters A, B, ... \newcount\appendixno \appendixno = `\@ +% % \def\appendixletter{\char\the\appendixno} -% We do the following for the sake of pdftex, which needs the actual +% We do the following ugly conditional instead of the above simple +% construct for the sake of pdftex, which needs the actual % letter in the expansion, not just typeset. +% \def\appendixletter{% \ifnum\appendixno=`A A% \else\ifnum\appendixno=`B B% @@ -3742,11 +4026,12 @@ width0pt\relax} \fi % Each @chapter defines this as the name of the chapter. % page headings and footings can use it. @section does likewise. +% However, they are not reliable, because we don't use marks. \def\thischapter{} \def\thissection{} \newcount\absseclevel % used to calculate proper heading level -\newcount\secbase\secbase=0 % @raise/lowersections modify this count +\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count % @raisesections: treat @section as chapter, @subsection as section, etc. \def\raisesections{\global\advance\secbase by -1} @@ -3756,121 +4041,142 @@ width0pt\relax} \fi \def\lowersections{\global\advance\secbase by 1} \let\down=\lowersections % original BFox name -% Choose a numbered-heading macro -% #1 is heading level if unmodified by @raisesections or @lowersections -% #2 is text for heading -\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \chapterzzz{#2} -\or - \seczzz{#2} -\or - \numberedsubseczzz{#2} -\or - \numberedsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \chapterzzz{#2} +% we only have subsub. +\chardef\maxseclevel = 3 +% +% A numbered section within an unnumbered changes to unnumbered too. +% To achive this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unmlevel = \maxseclevel +% +% Trace whether the current chapter is an appendix or not: +% \chapheadtype is "N" or "A", unnumbered chapters are ignored. +\def\chapheadtype{N} + +% Choose a heading macro +% #1 is heading type +% #2 is heading level +% #3 is text for heading +\def\genhead#1#2#3{% + % Compute the abs. sec. level: + \absseclevel=#2 + \advance\absseclevel by \secbase + % Make sure \absseclevel doesn't fall outside the range: + \ifnum \absseclevel < 0 + \absseclevel = 0 \else - \numberedsubsubseczzz{#2} + \ifnum \absseclevel > 3 + \absseclevel = 3 + \fi \fi -\fi -\suppressfirstparagraphindent -} - -% like \numhead, but chooses appendix heading levels -\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \appendixzzz{#2} -\or - \appendixsectionzzz{#2} -\or - \appendixsubseczzz{#2} -\or - \appendixsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \appendixzzz{#2} + % The heading type: + \def\headtype{#1}% + \if \headtype U% + \ifnum \absseclevel < \unmlevel + \chardef\unmlevel = \absseclevel + \fi \else - \appendixsubsubseczzz{#2} + % Check for appendix sections: + \ifnum \absseclevel = 0 + \edef\chapheadtype{\headtype}% + \else + \if \headtype A\if \chapheadtype N% + \errmessage{@appendix... within a non-appendix chapter}% + \fi\fi + \fi + % Check for numbered within unnumbered: + \ifnum \absseclevel > \unmlevel + \def\headtype{U}% + \else + \chardef\unmlevel = 3 + \fi \fi -\fi -\suppressfirstparagraphindent -} - -% like \numhead, but chooses numberless heading levels -\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \unnumberedzzz{#2} -\or - \unnumberedseczzz{#2} -\or - \unnumberedsubseczzz{#2} -\or - \unnumberedsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \unnumberedzzz{#2} + % Now print the heading: + \if \headtype U% + \ifcase\absseclevel + \unnumberedzzz{#3}% + \or \unnumberedseczzz{#3}% + \or \unnumberedsubseczzz{#3}% + \or \unnumberedsubsubseczzz{#3}% + \fi \else - \unnumberedsubsubseczzz{#2} + \if \headtype A% + \ifcase\absseclevel + \appendixzzz{#3}% + \or \appendixsectionzzz{#3}% + \or \appendixsubseczzz{#3}% + \or \appendixsubsubseczzz{#3}% + \fi + \else + \ifcase\absseclevel + \chapterzzz{#3}% + \or \seczzz{#3}% + \or \numberedsubseczzz{#3}% + \or \numberedsubsubseczzz{#3}% + \fi + \fi \fi -\fi -\suppressfirstparagraphindent -} - -% @chapter, @appendix, @unnumbered. -\def\thischaptername{No Chapter Title} -\outer\def\chapter{\parsearg\chapteryyy} -\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz -\def\chapterzzz #1{% - \secno=0 \subsecno=0 \subsubsecno=0 - \global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}% - \chapmacro {#1}{\the\chapno}% - \gdef\thissection{#1}% - \gdef\thischaptername{#1}% - % We don't substitute the actual chapter name into \thischapter - % because we don't want its macros evaluated now. - \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% - \writetocentry{chap}{#1}{{\the\chapno}} - \donoderef + \suppressfirstparagraphindent +} + +% an interface: +\def\numhead{\genhead N} +\def\apphead{\genhead A} +\def\unnmhead{\genhead U} + +% @chapter, @appendix, @unnumbered. Increment top-level counter, reset +% all lower-level sectioning counters to zero. +% +% Also set \chaplevelprefix, which we prepend to @float sequence numbers +% (e.g., figures), q.v. By default (before any chapter), that is empty. +\let\chaplevelprefix = \empty +% +\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz +\def\chapterzzz#1{% + % section resetting is \global in case the chapter is in a group, such + % as an @include file. + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\chapno by 1 + % + % Used for \float. + \gdef\chaplevelprefix{\the\chapno.}% + \resetallfloatnos + % + \message{\putwordChapter\space \the\chapno}% + % + % Write the actual heading. + \chapmacro{#1}{Ynumbered}{\the\chapno}% + % + % So @section and the like are numbered underneath this chapter. \global\let\section = \numberedsec \global\let\subsection = \numberedsubsec \global\let\subsubsection = \numberedsubsubsec } -% we use \chapno to avoid indenting back -\def\appendixbox#1{% - \setbox0 = \hbox{\putwordAppendix{} \the\chapno}% - \hbox to \wd0{#1\hss}} - -\outer\def\appendix{\parsearg\appendixyyy} -\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz -\def\appendixzzz #1{% - \secno=0 \subsecno=0 \subsubsecno=0 - \global\advance \appendixno by 1 - \message{\putwordAppendix\space \appendixletter}% - \chapmacro {#1}{\appendixbox{\putwordAppendix{} \appendixletter}}% - \gdef\thissection{#1}% - \gdef\thischaptername{#1}% - \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% - \writetocentry{appendix}{#1}{{\appendixletter}} - \appendixnoderef +\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz +\def\appendixzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\appendixno by 1 + \gdef\chaplevelprefix{\appendixletter.}% + \resetallfloatnos + % + \def\appendixnum{\putwordAppendix\space \appendixletter}% + \message{\appendixnum}% + % + \chapmacro{#1}{Yappendix}{\appendixletter}% + % \global\let\section = \appendixsec \global\let\subsection = \appendixsubsec \global\let\subsubsection = \appendixsubsubsec } -% @centerchap is like @unnumbered, but the heading is centered. -\outer\def\centerchap{\parsearg\centerchapyyy} -\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}} - -% @top is like @unnumbered. -\outer\def\top{\parsearg\unnumberedyyy} - -\outer\def\unnumbered{\parsearg\unnumberedyyy} -\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz -\def\unnumberedzzz #1{% - \secno=0 \subsecno=0 \subsubsecno=0 +\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +\def\unnumberedzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\unnumberedno by 1 + % + % Since an unnumbered has no number, no prefix for figures. + \global\let\chaplevelprefix = \empty + \resetallfloatnos % % This used to be simply \message{#1}, but TeX fully expands the % argument to \message. Therefore, if #1 contained @-commands, TeX @@ -3883,134 +4189,98 @@ width0pt\relax} \fi % \the to achieve this: TeX expands \the only once, % simply yielding the contents of . (We also do this for % the toc entries.) - \toks0 = {#1}\message{(\the\toks0)}% + \toks0 = {#1}% + \message{(\the\toks0)}% + % + \chapmacro{#1}{Ynothing}{\the\unnumberedno}% % - \unnumbchapmacro {#1}% - \gdef\thischapter{#1}\gdef\thissection{#1}% - \writetocentry{unnumbchap}{#1}{{\the\chapno}} - \unnumbnoderef \global\let\section = \unnumberedsec \global\let\subsection = \unnumberedsubsec \global\let\subsubsection = \unnumberedsubsubsec } +% @centerchap is like @unnumbered, but the heading is centered. +\outer\parseargdef\centerchap{% + % Well, we could do the following in a group, but that would break + % an assumption that \chapmacro is called at the outermost level. + % Thus we are safer this way: --kasal, 24feb04 + \let\centerparametersmaybe = \centerparameters + \unnmhead0{#1}% + \let\centerparametersmaybe = \relax +} + +% @top is like @unnumbered. +\let\top\unnumbered + % Sections. -\outer\def\numberedsec{\parsearg\secyyy} -\def\secyyy #1{\numhead1{#1}} % normally calls seczzz -\def\seczzz #1{% - \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % - \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% - \writetocentry{sec}{#1}{{\the\chapno}{\the\secno}} - \donoderef - \nobreak +\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz +\def\seczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% } -\outer\def\appendixsection{\parsearg\appendixsecyyy} -\outer\def\appendixsec{\parsearg\appendixsecyyy} -\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz -\def\appendixsectionzzz #1{% - \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % - \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% - \writetocentry{sec}{#1}{{\appendixletter}{\the\secno}} - \appendixnoderef - \nobreak +\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz +\def\appendixsectionzzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% } +\let\appendixsec\appendixsection -\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy} -\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz -\def\unnumberedseczzz #1{% - \plainsecheading {#1}\gdef\thissection{#1}% - \writetocentry{unnumbsec}{#1}{{\the\chapno}{\the\secno}} - \unnumbnoderef - \nobreak +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz +\def\unnumberedseczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% } % Subsections. -\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy} -\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz -\def\numberedsubseczzz #1{% - \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % - \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% - \writetocentry{subsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}} - \donoderef - \nobreak +\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz +\def\numberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% } -\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy} -\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz -\def\appendixsubseczzz #1{% - \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % - \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% - \writetocentry{subsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}} - \appendixnoderef - \nobreak +\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz +\def\appendixsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno}% } -\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy} -\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz -\def\unnumberedsubseczzz #1{% - \plainsubsecheading {#1}\gdef\thissection{#1}% - \writetocentry{unnumbsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}} - \unnumbnoderef - \nobreak +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +\def\unnumberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno}% } % Subsubsections. -\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy} -\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz -\def\numberedsubsubseczzz #1{% - \gdef\thissection{#1}\global\advance \subsubsecno by 1 % - \subsubsecheading {#1} - {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% - \writetocentry{subsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}} - \donoderef - \nobreak +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz +\def\numberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynumbered}% + {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% } -\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy} -\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz -\def\appendixsubsubseczzz #1{% - \gdef\thissection{#1}\global\advance \subsubsecno by 1 % - \subsubsecheading {#1} - {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% - \writetocentry{subsubsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}} - \appendixnoderef - \nobreak +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz +\def\appendixsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% } -\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy} -\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz -\def\unnumberedsubsubseczzz #1{% - \plainsubsubsecheading {#1}\gdef\thissection{#1}% - \writetocentry{unnumbsubsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}} - \unnumbnoderef - \nobreak +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +\def\unnumberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% } -% These are variants which are not "outer", so they can appear in @ifinfo. -% Actually, they should now be obsolete; ordinary section commands should work. -\def\infotop{\parsearg\unnumberedzzz} -\def\infounnumbered{\parsearg\unnumberedzzz} -\def\infounnumberedsec{\parsearg\unnumberedseczzz} -\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} -\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} - -\def\infoappendix{\parsearg\appendixzzz} -\def\infoappendixsec{\parsearg\appendixseczzz} -\def\infoappendixsubsec{\parsearg\appendixsubseczzz} -\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} - -\def\infochapter{\parsearg\chapterzzz} -\def\infosection{\parsearg\sectionzzz} -\def\infosubsection{\parsearg\subsectionzzz} -\def\infosubsubsection{\parsearg\subsubsectionzzz} - % These macros control what the section commands do, according % to what kind of chapter we are in (ordinary, appendix, or unnumbered). % Define them by default for a numbered chapter. -\global\let\section = \numberedsec -\global\let\subsection = \numberedsubsec -\global\let\subsubsection = \numberedsubsubsec +\let\section = \numberedsec +\let\subsection = \numberedsubsec +\let\subsubsection = \numberedsubsubsec % Define @majorheading, @heading and @subheading @@ -4023,23 +4293,27 @@ width0pt\relax} \fi % if justification is not attempted. Hence \raggedright. -\def\majorheading{\parsearg\majorheadingzzz} -\def\majorheadingzzz #1{% +\def\majorheading{% {\advance\chapheadingskip by 10pt \chapbreak }% - {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\penalty 200} + \parsearg\chapheadingzzz +} -\def\chapheading{\parsearg\chapheadingzzz} -\def\chapheadingzzz #1{\chapbreak % +\def\chapheading{\chapbreak \parsearg\chapheadingzzz} +\def\chapheadingzzz#1{% {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\penalty 200} + \rm #1\hfill}}% + \bigskip \par\penalty 200\relax + \suppressfirstparagraphindent +} % @heading, @subheading, @subsubheading. -\def\heading{\parsearg\plainsecheading} -\def\subheading{\parsearg\plainsubsecheading} -\def\subsubheading{\parsearg\plainsubsubsecheading} +\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} % These macros generate a chapter, section, etc. heading only % (including whitespace, linebreaking, etc. around it), @@ -4048,8 +4322,6 @@ width0pt\relax} \fi %%% Args are the skip and penalty (usually negative) \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} -\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} - %%% Define plain chapter starts, and page on/off switching for it % Parameter controlling skip before chapter headings (if needed) @@ -4072,7 +4344,7 @@ width0pt\relax} \fi \global\let\pagealignmacro=\chappager \global\def\HEADINGSon{\HEADINGSsingle}} -\def\CHAPPAGodd{ +\def\CHAPPAGodd{% \global\let\contentsalignmacro = \chapoddpage \global\let\pchapsepmacro=\chapoddpage \global\let\pagealignmacro=\chapoddpage @@ -4080,116 +4352,201 @@ width0pt\relax} \fi \CHAPPAGon -\def\CHAPFplain{ -\global\let\chapmacro=\chfplain -\global\let\unnumbchapmacro=\unnchfplain -\global\let\centerchapmacro=\centerchfplain} - -% Plain chapter opening. -% #1 is the text, #2 the chapter number or empty if unnumbered. -\def\chfplain#1#2{% +% Chapter opening. +% +% #1 is the text, #2 is the section type (Ynumbered, Ynothing, +% Yappendix, Yomitfromtoc), #3 the chapter number. +% +% To test against our argument. +\def\Ynothingkeyword{Ynothing} +\def\Yomitfromtockeyword{Yomitfromtoc} +\def\Yappendixkeyword{Yappendix} +% +\def\chapmacro#1#2#3{% \pchapsepmacro {% \chapfonts \rm - \def\chapnum{#2}% - \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}% + % + % Have to define \thissection before calling \donoderef, because the + % xref code eventually uses it. On the other hand, it has to be called + % after \pchapsepmacro, or the headline will change too soon. + \gdef\thissection{#1}% + \gdef\thischaptername{#1}% + % + % Only insert the separating space if we have a chapter/appendix + % number, and don't print the unnumbered ``number''. + \def\temptype{#2}% + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unnchap}% + \gdef\thischapter{#1}% + \else\ifx\temptype\Yomitfromtockeyword + \setbox0 = \hbox{}% contents like unnumbered, but no toc entry + \def\toctype{omit}% + \gdef\thischapter{}% + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% + \def\toctype{app}% + % We don't substitute the actual chapter name into \thischapter + % because we don't want its macros evaluated now. And we don't + % use \thissection because that changes with each section. + % + \xdef\thischapter{\putwordAppendix{} \appendixletter: + \noexpand\thischaptername}% + \else + \setbox0 = \hbox{#3\enspace}% + \def\toctype{numchap}% + \xdef\thischapter{\putwordChapter{} \the\chapno: + \noexpand\thischaptername}% + \fi\fi\fi + % + % Write the toc entry for this chapter. Must come before the + % \donoderef, because we include the current node name in the toc + % entry, and \donoderef resets it to empty. + \writetocentry{\toctype}{#1}{#3}% + % + % For pdftex, we have to write out the node definition (aka, make + % the pdfdest) after any page break, but before the actual text has + % been typeset. If the destination for the pdf outline is after the + % text, then jumping from the outline may wind up with the text not + % being visible, for instance under high magnification. + \donoderef{#2}% + % + % Typeset the actual heading. \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent = \wd0 \centerparametersmaybe + \hangindent=\wd0 \centerparametersmaybe \unhbox0 #1\par}% }% \nobreak\bigskip % no page break after a chapter title \nobreak } -% Plain opening for unnumbered. -\def\unnchfplain#1{\chfplain{#1}{}} - % @centerchap -- centered and unnumbered. \let\centerparametersmaybe = \relax -\def\centerchfplain#1{{% - \def\centerparametersmaybe{% - \advance\rightskip by 3\rightskip - \leftskip = \rightskip - \parfillskip = 0pt - }% - \chfplain{#1}{}% -}} +\def\centerparameters{% + \advance\rightskip by 3\rightskip + \leftskip = \rightskip + \parfillskip = 0pt +} -\CHAPFplain % The default +% I don't think this chapter style is supported any more, so I'm not +% updating it with the new noderef stuff. We'll see. --karl, 11aug03. +% +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} +% \def\unnchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright \rm #1\hfill}}\bigskip \par\nobreak } - \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } - \def\centerchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt \hfill {\rm #1}\hfill}}\bigskip \par\nobreak } - -\def\CHAPFopen{ -\global\let\chapmacro=\chfopen -\global\let\unnumbchapmacro=\unnchfopen -\global\let\centerchapmacro=\centerchfopen} +\def\CHAPFopen{% + \global\let\chapmacro=\chfopen + \global\let\centerchapmacro=\centerchfopen} -% Section titles. +% Section titles. These macros combine the section number parts and +% call the generic \sectionheading to do the printing. +% \newskip\secheadingskip -\def\secheadingbreak{\dobreak \secheadingskip {-1000}} -\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}} -\def\plainsecheading#1{\sectionheading{sec}{}{#1}} +\def\secheadingbreak{\dobreak \secheadingskip{-1000}} % Subsection titles. -\newskip \subsecheadingskip -\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}} -\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}} -\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}} +\newskip\subsecheadingskip +\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}} % Subsubsection titles. -\let\subsubsecheadingskip = \subsecheadingskip -\let\subsubsecheadingbreak = \subsecheadingbreak -\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}} -\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}} +\def\subsubsecheadingskip{\subsecheadingskip} +\def\subsubsecheadingbreak{\subsecheadingbreak} -% Print any size section title. +% Print any size, any type, section title. % -% #1 is the section type (sec/subsec/subsubsec), #2 is the section -% number (maybe empty), #3 the text. -\def\sectionheading#1#2#3{% - {% - \expandafter\advance\csname #1headingskip\endcsname by \parskip - \csname #1headingbreak\endcsname - }% +% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is +% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the +% section number. +% +\def\sectionheading#1#2#3#4{% {% % Switch to the right set of fonts. - \csname #1fonts\endcsname \rm + \csname #2fonts\endcsname \rm + % + % Insert space above the heading. + \csname #2headingbreak\endcsname + % + % Only insert the space after the number if we have a section number. + \def\sectionlevel{#2}% + \def\temptype{#3}% + % + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unn}% + \gdef\thissection{#1}% + \else\ifx\temptype\Yomitfromtockeyword + % for @headings -- no section number, don't include in toc, + % and don't redefine \thissection. + \setbox0 = \hbox{}% + \def\toctype{omit}% + \let\sectionlevel=\empty + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{#4\enspace}% + \def\toctype{app}% + \gdef\thissection{#1}% + \else + \setbox0 = \hbox{#4\enspace}% + \def\toctype{num}% + \gdef\thissection{#1}% + \fi\fi\fi + % + % Write the toc entry (before \donoderef). See comments in \chapmacro. + \writetocentry{\toctype\sectionlevel}{#1}{#4}% + % + % Write the node reference (= pdf destination for pdftex). + % Again, see comments in \chapmacro. + \donoderef{#3}% % - % Only insert the separating space if we have a section number. - \def\secnum{#2}% - \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}% + % Interline glue will be inserted when the vbox is completed. + % That glue will be a valid breakpoint for the page, since it'll be + % preceded by a whatsit (usually from the \donoderef, or from the + % \writetocentry if there was no node). We don't want to allow that + % break, since then the whatsits could end up on page n while the + % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000. + \nobreak % + % Output the actual section heading. \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent = \wd0 % zero if no section number - \unhbox0 #3}% + \hangindent=\wd0 % zero if no section number + \unhbox0 #1}% }% - % Add extra space after the heading -- either a line space or a - % paragraph space, whichever is more. (Some people like to set - % \parskip to large values for some reason.) Don't allow stretch, though. - \nobreak - \ifdim\parskip>\normalbaselineskip - \kern\parskip - \else - \kern\normalbaselineskip - \fi + % Add extra space after the heading -- half of whatever came above it. + % Don't allow stretch, though. + \kern .5 \csname #2headingskip\endcsname + % + % Do not let the kern be a potential breakpoint, as it would be if it + % was followed by glue. \nobreak + % + % We'll almost certainly start a paragraph next, so don't let that + % glue accumulate. (Not a breakpoint because it's preceded by a + % discardable item.) + \vskip-\parskip + % + % This is purely so the last item on the list is a known \penalty > + % 10000. This is so \startdefun can avoid allowing breakpoints after + % section headings. Otherwise, it would insert a valid breakpoint between: + % + % @section sec-whatever + % @deffn def-whatever + \penalty 10001 } @@ -4198,119 +4555,173 @@ width0pt\relax} \fi \newwrite\tocfile % Write an entry to the toc file, opening it if necessary. -% Called from @chapter, etc. We supply {\folio} at the end of the -% argument, which will end up as the last argument to the \...entry macro. +% Called from @chapter, etc. +% +% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} +% We append the current node name (if any) and page number as additional +% arguments for the \{chap,sec,...}entry macros which will eventually +% read this. The node name is used in the pdf outlines as the +% destination to jump to. % -% Usage: \writetocentry{chap}{The Name of The Game}{{\the\chapno}} % We open the .toc file for writing here instead of at @setfilename (or % any other fixed time) so that @contents can be anywhere in the document. +% But if #1 is `omit', then we don't do anything. This is used for the +% table of contents chapter openings themselves. % \newif\iftocfileopened +\def\omitkeyword{omit}% +% \def\writetocentry#1#2#3{% - \iftocfileopened\else - \immediate\openout\tocfile = \jobname.toc - \global\tocfileopenedtrue - \fi - % - \iflinks - \toks0 = {#2}% - \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}#3{\folio}}}% - \temp + \edef\writetoctype{#1}% + \ifx\writetoctype\omitkeyword \else + \iftocfileopened\else + \immediate\openout\tocfile = \jobname.toc + \global\tocfileopenedtrue + \fi + % + \iflinks + {\atdummies + \edef\temp{% + \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}% + \temp + }% + \fi \fi % - % Tell \shipout to create a page destination if we're doing pdf, which - % will be the target of the links in the table of contents. We can't - % just do it on every page because the title pages are numbered 1 and - % 2 (the page numbers aren't printed), and so are the first two pages - % of the document. Thus, we'd have two destinations named `1', and - % two named `2'. - \ifpdf \pdfmakepagedesttrue \fi + % Tell \shipout to create a pdf destination on each page, if we're + % writing pdf. These are used in the table of contents. We can't + % just write one on every page because the title pages are numbered + % 1 and 2 (the page numbers aren't printed), and so are the first + % two pages of the document. Thus, we'd have two destinations named + % `1', and two named `2'. + \ifpdf \global\pdfmakepagedesttrue \fi +} + + +% These characters do not print properly in the Computer Modern roman +% fonts, so we must take special care. This is more or less redundant +% with the Texinfo input format setup at the end of this file. +% +\def\activecatcodes{% + \catcode`\"=\active + \catcode`\$=\active + \catcode`\<=\active + \catcode`\>=\active + \catcode`\\=\active + \catcode`\^=\active + \catcode`\_=\active + \catcode`\|=\active + \catcode`\~=\active +} + + +% Read the toc file, which is essentially Texinfo input. +\def\readtocfile{% + \setupdatafile + \activecatcodes + \input \jobname.toc } \newskip\contentsrightmargin \contentsrightmargin=1in \newcount\savepageno \newcount\lastnegativepageno \lastnegativepageno = -1 -% Finish up the main text and prepare to read what we've written -% to \tocfile. +% Prepare to read what we've written to \tocfile. % \def\startcontents#1{% - % If @setchapternewpage on, and @headings double, the contents should - % start on an odd page, unlike chapters. Thus, we maintain - % \contentsalignmacro in parallel with \pagealignmacro. - % From: Torbjorn Granlund - \contentsalignmacro - \immediate\closeout\tocfile - % - % Don't need to put `Contents' or `Short Contents' in the headline. - % It is abundantly clear what they are. - \unnumbchapmacro{#1}\def\thischapter{}% - \savepageno = \pageno - \begingroup % Set up to handle contents files properly. - \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - % We can't do this, because then an actual ^ in a section - % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. - %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi - \raggedbottom % Worry more about breakpoints than the bottom. - \advance\hsize by -\contentsrightmargin % Don't use the full line length. - % - % Roman numerals for page numbers. - \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi + % If @setchapternewpage on, and @headings double, the contents should + % start on an odd page, unlike chapters. Thus, we maintain + % \contentsalignmacro in parallel with \pagealignmacro. + % From: Torbjorn Granlund + \contentsalignmacro + \immediate\closeout\tocfile + % + % Don't need to put `Contents' or `Short Contents' in the headline. + % It is abundantly clear what they are. + \def\thischapter{}% + \chapmacro{#1}{Yomitfromtoc}{}% + % + \savepageno = \pageno + \begingroup % Set up to handle contents files properly. + \raggedbottom % Worry more about breakpoints than the bottom. + \advance\hsize by -\contentsrightmargin % Don't use the full line length. + % + % Roman numerals for page numbers. + \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi } % Normal (long) toc. \def\contents{% - \startcontents{\putwordTOC}% - \openin 1 \jobname.toc - \ifeof 1 \else - \closein 1 - \input \jobname.toc - \fi - \vfill \eject - \contentsalignmacro % in case @setchapternewpage odd is in effect - \pdfmakeoutlines - \endgroup - \lastnegativepageno = \pageno - \global\pageno = \savepageno + \startcontents{\putwordTOC}% + \openin 1 \jobname.toc + \ifeof 1 \else + \readtocfile + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \ifeof 1 \else + \pdfmakeoutlines + \fi + \closein 1 + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno } % And just the chapters. \def\summarycontents{% - \startcontents{\putwordShortTOC}% - % - \let\chapentry = \shortchapentry - \let\appendixentry = \shortappendixentry - \let\unnumbchapentry = \shortunnumberedentry - % We want a true roman here for the page numbers. - \secfonts - \let\rm=\shortcontrm \let\bf=\shortcontbf - \let\sl=\shortcontsl \let\tt=\shortconttt - \rm - \hyphenpenalty = 10000 - \advance\baselineskip by 1pt % Open it up a little. - \def\secentry ##1##2##3##4{} - \def\subsecentry ##1##2##3##4##5{} - \def\subsubsecentry ##1##2##3##4##5##6{} - \let\unnumbsecentry = \secentry - \let\unnumbsubsecentry = \subsecentry - \let\unnumbsubsubsecentry = \subsubsecentry - \openin 1 \jobname.toc - \ifeof 1 \else - \closein 1 - \input \jobname.toc - \fi - \vfill \eject - \contentsalignmacro % in case @setchapternewpage odd is in effect - \endgroup - \lastnegativepageno = \pageno - \global\pageno = \savepageno + \startcontents{\putwordShortTOC}% + % + \let\numchapentry = \shortchapentry + \let\appentry = \shortchapentry + \let\unnchapentry = \shortunnchapentry + % We want a true roman here for the page numbers. + \secfonts + \let\rm=\shortcontrm \let\bf=\shortcontbf + \let\sl=\shortcontsl \let\tt=\shortconttt + \rm + \hyphenpenalty = 10000 + \advance\baselineskip by 1pt % Open it up a little. + \def\numsecentry##1##2##3##4{} + \let\appsecentry = \numsecentry + \let\unnsecentry = \numsecentry + \let\numsubsecentry = \numsecentry + \let\appsubsecentry = \numsecentry + \let\unnsubsecentry = \numsecentry + \let\numsubsubsecentry = \numsecentry + \let\appsubsubsecentry = \numsecentry + \let\unnsubsubsecentry = \numsecentry + \openin 1 \jobname.toc + \ifeof 1 \else + \readtocfile + \fi + \closein 1 + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno } \let\shortcontents = \summarycontents -\ifpdf - \pdfcatalog{/PageMode /UseOutlines}% -\fi +% Typeset the label for a chapter or appendix for the short contents. +% The arg is, e.g., `A' for an appendix, or `3' for a chapter. +% +\def\shortchaplabel#1{% + % This space should be enough, since a single number is .5em, and the + % widest letter (M) is 1em, at least in the Computer Modern fonts. + % But use \hss just in case. + % (This space doesn't include the extra space that gets added after + % the label; that gets put in by \shortchapentry above.) + % + % We'd like to right-justify chapter numbers, but that looks strange + % with appendix letters. And right-justifying numbers and + % left-justifying letters looks strange when there is less than 10 + % chapters. Have to read the whole toc once to know how many chapters + % there are before deciding ... + \hbox to 1em{#1\hss}% +} % These macros generate individual entries in the table of contents. % The first argument is the chapter or section name. @@ -4318,58 +4729,46 @@ width0pt\relax} \fi % The arguments in between are the chapter number, section number, ... % Chapters, in the main contents. -\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} +\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} % % Chapters, in the short toc. % See comments in \dochapentry re vbox and related settings. -\def\shortchapentry#1#2#3{% - \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}% +\def\shortchapentry#1#2#3#4{% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% } % Appendices, in the main contents. -\def\appendixentry#1#2#3{% - \dochapentry{\appendixbox{\putwordAppendix{} #2}\labelspace#1}{#3}} +% Need the word Appendix, and a fixed-size box. % -% Appendices, in the short toc. -\let\shortappendixentry = \shortchapentry - -% Typeset the label for a chapter or appendix for the short contents. -% The arg is, e.g., `Appendix A' for an appendix, or `3' for a chapter. -% We could simplify the code here by writing out an \appendixentry -% command in the toc file for appendices, instead of using \chapentry -% for both, but it doesn't seem worth it. -% -\newdimen\shortappendixwidth +\def\appendixbox#1{% + % We use M since it's probably the widest letter. + \setbox0 = \hbox{\putwordAppendix{} M}% + \hbox to \wd0{\putwordAppendix{} #1\hss}} % -\def\shortchaplabel#1{% - % This space should be enough, since a single number is .5em, and the - % widest letter (M) is 1em, at least in the Computer Modern fonts. - % But use \hss just in case. - % (This space doesn't include the extra space that gets added after - % the label; that gets put in by \shortchapentry above.) - \dimen0 = 1em - \hbox to \dimen0{#1\hss}% -} +\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}} % Unnumbered chapters. -\def\unnumbchapentry#1#2#3{\dochapentry{#1}{#3}} -\def\shortunnumberedentry#1#2#3{\tocentry{#1}{\doshortpageno\bgroup#3\egroup}} +\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} +\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} % Sections. -\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} -\def\unnumbsecentry#1#2#3#4{\dosecentry{#1}{#4}} +\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} +\let\appsecentry=\numsecentry +\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}} % Subsections. -\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} -\def\unnumbsubsecentry#1#2#3#4#5{\dosubsecentry{#1}{#5}} +\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}} +\let\appsubsecentry=\numsubsecentry +\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} % And subsubsections. -\def\subsubsecentry#1#2#3#4#5#6{% - \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} -\def\unnumbsubsubsecentry#1#2#3#4#5#6{\dosubsubsecentry{#1}{#6}} +\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}} +\let\appsubsubsecentry=\numsubsubsecentry +\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}} % This parameter controls the indentation of the various levels. -\newdimen\tocindent \tocindent = 3pc +% Same as \defaultparindent. +\newdimen\tocindent \tocindent = 15pt % Now for the actual typesetting. In all these, #1 is the text and #2 is the % page number. @@ -4400,17 +4799,8 @@ width0pt\relax} \fi \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} -% Final typesetting of a toc entry; we use the same \entry macro as for -% the index entries, but we want to suppress hyphenation here. (We -% can't do that in the \entry macro, since index entries might consist -% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.) -\def\tocentry#1#2{\begingroup - \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks - % Do not use \turnoffactive in these arguments. Since the toc is - % typeset in cmr, characters such as _ would come out wrong; we - % have to do the usual translation tricks. - \entry{#1}{#2}% -\endgroup} +% We use the same \entry macro as for the index entries. +\let\tocentry = \entry % Space between chapter (or whatever) number and the title. \def\labelspace{\hskip1em \relax} @@ -4420,8 +4810,8 @@ width0pt\relax} \fi \def\chapentryfonts{\secfonts \rm} \def\secentryfonts{\textfonts} -\let\subsecentryfonts = \textfonts -\let\subsubsecentryfonts = \textfonts +\def\subsecentryfonts{\textfonts} +\def\subsubsecentryfonts{\textfonts} \message{environments,} @@ -4448,10 +4838,10 @@ width0pt\relax} \fi % The text. (`r' is open on the right, `e' somewhat less so on the left.) \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} % -\global\setbox\errorbox=\hbox to \dimen0{\hfil +\setbox\errorbox=\hbox to \dimen0{\hfil \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. \advance\hsize by -2\dimen2 % Rules. - \vbox{ + \vbox{% \hrule height\dimen2 \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. @@ -4465,14 +4855,13 @@ width0pt\relax} \fi % One exception: @ is still an escape character, so that @end tex works. % But \@ or @@ will get a plain tex @ character. -\def\tex{\begingroup +\envdef\tex{% \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie \catcode `\%=14 \catcode `\+=\other \catcode `\"=\other - \catcode `\==\other \catcode `\|=\other \catcode `\<=\other \catcode `\>=\other @@ -4488,20 +4877,23 @@ width0pt\relax} \fi \let\!=\ptexexclam \let\i=\ptexi \let\indent=\ptexindent + \let\noindent=\ptexnoindent \let\{=\ptexlbrace \let\+=\tabalign \let\}=\ptexrbrace \let\/=\ptexslash \let\*=\ptexstar \let\t=\ptext + \let\frenchspacing=\plainfrenchspacing % \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% \def\@{@}% -\let\Etex=\endgroup} +} +% There is no need to define \Etex. % Define @lisp ... @end lisp. -% @lisp does a \begingroup so it can rebind things, +% @lisp environment forms a group so it can rebind things, % including the definition of @end lisp (which normally is erroneous). % Amount to narrow the margins by for @lisp. @@ -4512,19 +4904,6 @@ width0pt\relax} \fi % have any width. \def\lisppar{\null\endgraf} -% Make each space character in the input produce a normal interword -% space in the output. Don't allow a line break at this space, as this -% is used only in environments like @example, where each line of input -% should produce a line of output anyway. -% -{\obeyspaces % -\gdef\sepspaces{\obeyspaces\let =\tie}} - -% Define \obeyedspace to be our active space, whatever it is. This is -% for use in \parsearg. -{\sepspaces% -\global\let\obeyedspace= } - % This space is always present above and below environments. \newskip\envskipamount \envskipamount = 0pt @@ -4534,7 +4913,8 @@ width0pt\relax} \fi % start of the next paragraph will insert \parskip. % \def\aboveenvbreak{{% - % =10000 instead of <10000 because of a special case in \itemzzz, q.v. + % =10000 instead of <10000 because of a special case in \itemzzz and + % \sectionheading, q.v. \ifnum \lastpenalty=10000 \else \advance\envskipamount by \parskip \endgraf @@ -4542,7 +4922,7 @@ width0pt\relax} \fi \removelastskip % it's not a good place to break if the last penalty was \nobreak % or better ... - \ifnum\lastpenalty>10000 \else \penalty-50 \fi + \ifnum\lastpenalty<10000 \penalty-50 \fi \vskip\envskipamount \fi \fi @@ -4550,7 +4930,8 @@ width0pt\relax} \fi \let\afterenvbreak = \aboveenvbreak -% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins. +% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will +% also clear it, so that its embedded environments do the narrowing again. \let\nonarrowing=\relax % @cartouche ... @end cartouche: draw rectangle w/rounded corners around @@ -4574,52 +4955,52 @@ width0pt\relax} \fi % \newskip\lskip\newskip\rskip -\def\cartouche{% -\par % can't be in the midst of a paragraph. -\begingroup - \lskip=\leftskip \rskip=\rightskip - \leftskip=0pt\rightskip=0pt %we want these *outside*. - \cartinner=\hsize \advance\cartinner by-\lskip - \advance\cartinner by-\rskip - \cartouter=\hsize - \advance\cartouter by 18.4pt % allow for 3pt kerns on either -% side, and for 6pt waste from -% each corner char, and rule thickness - \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip - % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing=\comment - \vbox\bgroup - \baselineskip=0pt\parskip=0pt\lineskip=0pt - \carttop - \hbox\bgroup - \hskip\lskip - \vrule\kern3pt - \vbox\bgroup - \hsize=\cartinner - \kern3pt - \begingroup - \baselineskip=\normbskip - \lineskip=\normlskip - \parskip=\normpskip - \vskip -\parskip +\envdef\cartouche{% + \ifhmode\par\fi % can't be in the midst of a paragraph. + \startsavinginserts + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt % we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18.4pt % allow for 3pt kerns on either + % side, and for 6pt waste from + % each corner char, and rule thickness + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % Flag to tell @lisp, etc., not to narrow margin. + \let\nonarrowing = t% + \vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \kern3pt + \hsize=\cartinner + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip + \comment % For explanation, see the end of \def\group. +} \def\Ecartouche{% - \endgroup - \kern3pt - \egroup - \kern3pt\vrule - \hskip\rskip - \egroup - \cartbot - \egroup -\endgroup -}} + \ifhmode\par\fi + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup + \checkinserts +} % This macro is called at the beginning of all the @example variants, % inside a group. \def\nonfillstart{% \aboveenvbreak - \inENV % This group ends at the end of the body \hfuzz = 12pt % Don't be fussy \sepspaces % Make spaces be word-separators rather than space tokens. \let\par = \lisppar % don't ignore blank lines @@ -4627,116 +5008,134 @@ width0pt\relax} \fi \parskip = 0pt \parindent = 0pt \emergencystretch = 0pt % don't try to avoid overfull boxes - % @cartouche defines \nonarrowing to inhibit narrowing - % at next level down. \ifx\nonarrowing\relax \advance \leftskip by \lispnarrowing \exdentamount=\lispnarrowing - \let\exdent=\nofillexdent - \let\nonarrowing=\relax + \else + \let\nonarrowing = \relax \fi + \let\exdent=\nofillexdent } -% Define the \E... control sequence only if we are inside the particular -% environment, so the error checking in \end will work. -% -% To end an @example-like environment, we first end the paragraph (via -% \afterenvbreak's vertical glue), and then the group. That way we keep -% the zero \parskip that the environments set -- \parskip glue will be -% inserted at the beginning of the next paragraph in the document, after -% the environment. +% If you want all examples etc. small: @set dispenvsize small. +% If you want even small examples the full size: @set dispenvsize nosmall. +% This affects the following displayed environments: +% @example, @display, @format, @lisp % -\def\nonfillfinish{\afterenvbreak\endgroup} +\def\smallword{small} +\def\nosmallword{nosmall} +\let\SETdispenvsize\relax +\def\setnormaldispenv{% + \ifx\SETdispenvsize\smallword + \smallexamplefonts \rm + \fi +} +\def\setsmalldispenv{% + \ifx\SETdispenvsize\nosmallword + \else + \smallexamplefonts \rm + \fi +} -% @lisp: indented, narrowed, typewriter font. -\def\lisp{\begingroup - \nonfillstart - \let\Elisp = \nonfillfinish - \tt - \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. - \gobble % eat return +% We often define two environments, @foo and @smallfoo. +% Let's do it by one command: +\def\makedispenv #1#2{ + \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2} + \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2} + \expandafter\let\csname E#1\endcsname \afterenvbreak + \expandafter\let\csname Esmall#1\endcsname \afterenvbreak } -% @example: Same as @lisp. -\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp} +% Define two synonyms: +\def\maketwodispenvs #1#2#3{ + \makedispenv{#1}{#3} + \makedispenv{#2}{#3} +} +% @lisp: indented, narrowed, typewriter font; @example: same as @lisp. +% % @smallexample and @smalllisp: use smaller fonts. % Originally contributed by Pavel@xerox. -\def\smalllisp{\begingroup - \def\Esmalllisp{\nonfillfinish\endgroup}% - \def\Esmallexample{\nonfillfinish\endgroup}% - \smallexamplefonts - \lisp +% +\maketwodispenvs {lisp}{example}{% + \nonfillstart + \tt + \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. + \gobble % eat return } -\let\smallexample = \smalllisp - -% @display: same as @lisp except keep current font. +% @display/@smalldisplay: same as @lisp except keep current font. % -\def\display{\begingroup +\makedispenv {display}{% \nonfillstart - \let\Edisplay = \nonfillfinish \gobble } -% -% @smalldisplay: @display plus smaller fonts. -% -\def\smalldisplay{\begingroup - \def\Esmalldisplay{\nonfillfinish\endgroup}% - \smallexamplefonts \rm - \display -} -% @format: same as @display except don't narrow margins. +% @format/@smallformat: same as @display except don't narrow margins. % -\def\format{\begingroup - \let\nonarrowing = t +\makedispenv{format}{% + \let\nonarrowing = t% \nonfillstart - \let\Eformat = \nonfillfinish \gobble } -% -% @smallformat: @format plus smaller fonts. -% -\def\smallformat{\begingroup - \def\Esmallformat{\nonfillfinish\endgroup}% - \smallexamplefonts \rm - \format -} -% @flushleft (same as @format). -% -\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format} +% @flushleft: same as @format, but doesn't obey \SETdispenvsize. +\envdef\flushleft{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} +\let\Eflushleft = \afterenvbreak % @flushright. % -\def\flushright{\begingroup - \let\nonarrowing = t +\envdef\flushright{% + \let\nonarrowing = t% \nonfillstart - \let\Eflushright = \nonfillfinish \advance\leftskip by 0pt plus 1fill \gobble } +\let\Eflushright = \afterenvbreak % @quotation does normal linebreaking (hence we can't use \nonfillstart) -% and narrows the margins. +% and narrows the margins. We keep \parskip nonzero in general, since +% we're doing normal filling. So, when using \aboveenvbreak and +% \afterenvbreak, temporarily make \parskip 0. % -\def\quotation{% - \begingroup\inENV %This group ends at the end of the @quotation body +\envdef\quotation{% {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip \parindent=0pt - % We have retained a nonzero parskip for the environment, since we're - % doing normal filling. So to avoid extra space below the environment... - \def\Equotation{\parskip = 0pt \nonfillfinish}% % % @cartouche defines \nonarrowing to inhibit narrowing at next level down. \ifx\nonarrowing\relax \advance\leftskip by \lispnarrowing \advance\rightskip by \lispnarrowing \exdentamount = \lispnarrowing + \else \let\nonarrowing = \relax \fi + \parsearg\quotationlabel +} + +% We have retained a nonzero parskip for the environment, since we're +% doing normal filling. +% +\def\Equotation{% + \par + \ifx\quotationauthor\undefined\else + % indent a bit. + \leftline{\kern 2\leftskip \sl ---\quotationauthor}% + \fi + {\parskip=0pt \afterenvbreak}% +} + +% If we're given an argument, typeset it in bold with a colon after. +\def\quotationlabel#1{% + \def\temp{#1}% + \ifx\temp\empty \else + {\bf #1: }% + \fi } @@ -4758,7 +5157,7 @@ width0pt\relax} \fi % % [Knuth] p. 380 \def\uncatcodespecials{% - \def\do##1{\catcode`##1=12}\dospecials} + \def\do##1{\catcode`##1=\other}\dospecials} % % [Knuth] pp. 380,381,391 % Disable Spanish ligatures ?` and !` of \tt font @@ -4806,6 +5205,8 @@ width0pt\relax} \fi } \endgroup \def\setupverbatim{% + \let\nonarrowing = t% + \nonfillstart % Easiest (and conventionally used) font for verbatim \tt \def\par{\leavevmode\egroup\box0\endgraf}% @@ -4827,7 +5228,7 @@ width0pt\relax} \fi % % [Knuth] p. 382; only eat outer {} \begingroup - \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12 + \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] \endgroup % @@ -4844,13 +5245,6 @@ width0pt\relax} \fi % we need not redefine '\', '{' and '}'. % % Inspired by LaTeX's verbatim command set [latex.ltx] -%% Include LaTeX hack for completeness -- never know -%% \begingroup -%% \catcode`|=0 \catcode`[=1 -%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active -%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[ -%% #1|endgroup|def|Everbatim[]|end[verbatim]] -%% |endgroup % \begingroup \catcode`\ =\active @@ -4858,54 +5252,32 @@ width0pt\relax} \fi % ignore everything up to the first ^^M, that's the newline at the end % of the @verbatim input line itself. Otherwise we get an extra blank % line in the output. - \gdef\doverbatim#1^^M#2@end verbatim{#2\end{verbatim}}% + \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% + % We really want {...\end verbatim} in the body of the macro, but + % without the active space; thus we have to use \xdef and \gobble. \endgroup % -\def\verbatim{% - \def\Everbatim{\nonfillfinish\endgroup}% - \begingroup - \nonfillstart - \advance\leftskip by -\defbodyindent - \begingroup\setupverbatim\doverbatim +\envdef\verbatim{% + \setupverbatim\doverbatim } +\let\Everbatim = \afterenvbreak + % @verbatiminclude FILE - insert text of file in verbatim environment. % -% Allow normal characters that we make active in the argument (a file name). -\def\verbatiminclude{% - \begingroup - \catcode`\\=\other - \catcode`~=\other - \catcode`^=\other - \catcode`_=\other - \catcode`|=\other - \catcode`<=\other - \catcode`>=\other - \catcode`+=\other - \parsearg\doverbatiminclude -} -\def\setupverbatiminclude{% - \begingroup - \nonfillstart - \advance\leftskip by -\defbodyindent - \begingroup\setupverbatim -} +\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude} % \def\doverbatiminclude#1{% - % Restore active chars for included file. - \endgroup - \begingroup - \let\value=\expandablevalue - \def\thisfile{#1}% - \expandafter\expandafter\setupverbatiminclude\input\thisfile - \endgroup - \nonfillfinish - \endgroup + {% + \makevalueexpandable + \setupverbatim + \input #1 + \afterenvbreak + }% } % @copying ... @end copying. -% Save the text away for @insertcopying later. Many commands won't be -% allowed in this context, but that's ok. +% Save the text away for @insertcopying later. % % We save the uninterpreted tokens, rather than creating a box. % Saving the text in a box would be much easier, but then all the @@ -4914,641 +5286,349 @@ width0pt\relax} \fi % file; b) letting users define the frontmatter in as flexible order as % possible is very desirable. % -\def\copying{\begingroup - % Define a command to swallow text until we reach `@end copying'. - % \ is the escape char in this texinfo.tex file, so it is the - % delimiter for the command; @ will be the escape char when we read - % it, but that doesn't matter. - \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}% - % - % We must preserve ^^M's in the input file; see \insertcopying below. - \catcode`\^^M = \active - \docopying -} - -% What we do to finish off the copying text. -% -\def\enddocopying{\endgroup\ignorespaces} - -% @insertcopying. Here we must play games with ^^M's. On the one hand, -% we need them to delimit commands such as `@end quotation', so they -% must be active. On the other hand, we certainly don't want every -% end-of-line to be a \par, as would happen with the normal active -% definition of ^^M. On the third hand, two ^^M's in a row should still -% generate a \par. -% -% Our approach is to make ^^M insert a space and a penalty1 normally; -% then it can also check if \lastpenalty=1. If it does, then manually -% do \par. -% -% This messes up the normal definitions of @c[omment], so we redefine -% it. Similarly for @ignore. (These commands are used in the gcc -% manual for man page generation.) -% -% Seems pretty fragile, most line-oriented commands will presumably -% fail, but for the limited use of getting the copying text (which -% should be quite simple) inserted, we can hope it's ok. -% -{\catcode`\^^M=\active % -\gdef\insertcopying{\begingroup % - \parindent = 0pt % looks wrong on title page - \def^^M{% - \ifnum \lastpenalty=1 % - \par % - \else % - \space \penalty 1 % - \fi % - }% - % - % Fix @c[omment] for catcode 13 ^^M's. - \def\c##1^^M{\ignorespaces}% - \let\comment = \c % - % - % Don't bother jumping through all the hoops that \doignore does, it - % would be very hard since the catcodes are already set. - \long\def\ignore##1\end ignore{\ignorespaces}% - % - \copyingtext % -\endgroup}% +\def\copying{\checkenv{}\begingroup\scanargctxt\docopying} +\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}} +% +\def\insertcopying{% + \begingroup + \parindent = 0pt % paragraph indentation looks wrong on title page + \scanexp\copyingtext + \endgroup } \message{defuns,} % @defun etc. -% Allow user to change definition object font (\df) internally -\def\setdeffont#1 {\csname DEF#1\endcsname} - \newskip\defbodyindent \defbodyindent=.4in \newskip\defargsindent \defargsindent=50pt \newskip\deflastargmargin \deflastargmargin=18pt -\newcount\parencount - -% We want ()&[] to print specially on the defun line. -% -\def\activeparens{% - \catcode`\(=\active \catcode`\)=\active - \catcode`\&=\active - \catcode`\[=\active \catcode`\]=\active -} - -% Make control sequences which act like normal parenthesis chars. -\let\lparen = ( \let\rparen = ) - -{\activeparens % Now, smart parens don't turn on until &foo (see \amprm) - -% Be sure that we always have a definition for `(', etc. For example, -% if the fn name has parens in it, \boldbrax will not be in effect yet, -% so TeX would otherwise complain about undefined control sequence. -\global\let(=\lparen \global\let)=\rparen -\global\let[=\lbrack \global\let]=\rbrack - -\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 } -\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} -% This is used to turn on special parens -% but make & act ordinary (given that it's active). -\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr} - -% Definitions of (, ) and & used in args for functions. -% This is the definition of ( outside of all parentheses. -\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested - \global\advance\parencount by 1 -} -% -% This is the definition of ( when already inside a level of parens. -\gdef\opnested{\char`\(\global\advance\parencount by 1 } -% -\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. - % also in that case restore the outer-level definition of (. - \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi - \global\advance \parencount by -1 } -% If we encounter &foo, then turn on ()-hacking afterwards -\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } -% -\gdef\normalparens{\boldbrax\let&=\ampnr} -} % End of definition inside \activeparens -%% These parens (in \boldbrax) actually are a little bolder than the -%% contained text. This is especially needed for [ and ] -\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 } -\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 } -\let\ampnr = \& -\def\lbrb{{\bf\char`\[}} -\def\rbrb{{\bf\char`\]}} - -% Active &'s sneak into the index arguments, so make sure it's defined. -{ - \catcode`& = \active - \global\let& = \ampnr -} - -% \defname, which formats the name of the @def (not the args). -% #1 is the function name. -% #2 is the type of definition, such as "Function". -% -\def\defname#1#2{% - % How we'll output the type name. Putting it in brackets helps - % distinguish it from the body text that may end up on the next line - % just below it. - \ifempty{#2}% - \def\defnametype{}% +% Start the processing of @deffn: +\def\startdefun{% + \ifnum\lastpenalty<10000 + \medbreak \else - \def\defnametype{[\rm #2]}% + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we need to allow a + % break somewhere. Check specifically for penalty 10002, inserted + % by \defargscommonending, instead of 10000, since the sectioning + % commands also insert a nobreak penalty, and we don't want to allow + % a break between a section heading and a defun. + % + \ifnum\lastpenalty=10002 \penalty2000 \fi + % + % Similarly, after a section heading, do not allow a break. + % But do insert the glue. + \medskip % preceded by discardable penalty, so not a breakpoint \fi % - % Get the values of \leftskip and \rightskip as they were outside the @def... - \dimen2=\leftskip - \advance\dimen2 by -\defbodyindent - % - % Figure out values for the paragraph shape. - \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}% - \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line - \dimen1=\hsize \advance \dimen1 by -\defargsindent % size for continuations - \parshape 2 0in \dimen0 \defargsindent \dimen1 - % - % Output arg 2 ("Function" or some such) but stuck inside a box of - % width 0 so it does not interfere with linebreaking. - \noindent - % - {% Adjust \hsize to exclude the ambient margins, - % so that \rightline will obey them. - \advance \hsize by -\dimen2 - \dimen3 = 0pt % was -1.25pc - \rlap{\rightline{\defnametype\kern\dimen3}}% - }% - % - % Allow all lines to be underfull without complaint: - \tolerance=10000 \hbadness=10000 - \advance\leftskip by -\defbodyindent - \exdentamount=\defbodyindent - {\df #1}\enskip % output function name - % \defunargs will be called next to output the arguments, if any. -} - -% Common pieces to start any @def... -% #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence (which our caller defines). -% #3 is the control sequence to process the header, such as \defunheader. -% -\def\parsebodycommon#1#2#3{% - \begingroup\inENV - % If there are two @def commands in a row, we'll have a \nobreak, - % which is there to keep the function description together with its - % header. But if there's nothing but headers, we want to allow a - % break after all. Check for penalty 10002 (inserted by - % \defargscommonending) instead of 10000, since the sectioning - % commands insert a \penalty10000, and we don't want to allow a break - % between a section heading and a defun. - \ifnum\lastpenalty=10002 \penalty0 \fi - \medbreak - % - % Define the \E... end token that this defining construct specifies - % so that it will exit this group. - \def#1{\endgraf\endgroup\medbreak}% - % \parindent=0in \advance\leftskip by \defbodyindent \exdentamount=\defbodyindent } -% Common part of the \...x definitions. -% -\def\defxbodycommon{% - % As with \parsebodycommon above, allow line break if we have multiple - % x headers in a row. It's not a great place, though. - \ifnum\lastpenalty=10000 \penalty1000 \fi +\def\dodefunx#1{% + % First, check whether we are in the right environment: + \checkenv#1% + % + % As above, allow line break if we have multiple x headers in a row. + % It's not a great place, though. + \ifnum\lastpenalty=10002 \penalty3000 \fi % - \begingroup\obeylines + % And now, it's time to reuse the body of the original defun: + \expandafter\gobbledefun#1% } +\def\gobbledefun#1\startdefun{} -% Process body of @defun, @deffn, @defmac, etc. +% \printdefunline \deffnheader{text} % -\def\defparsebody#1#2#3{% - \parsebodycommon{#1}{#2}{#3}% - \def#2{\defxbodycommon \activeparens \spacesplit#3}% - \catcode\equalChar=\active - \begingroup\obeylines\activeparens - \spacesplit#3% +\def\printdefunline#1#2{% + \begingroup + % call \deffnheader: + #1#2 \endheader + % common ending: + \interlinepenalty = 10000 + \advance\rightskip by 0pt plus 1fil + \endgraf + \nobreak\vskip -\parskip + \penalty 10002 % signal to \startdefun and \dodefunx + % Some of the @defun-type tags do not enable magic parentheses, + % rendering the following check redundant. But we don't optimize. + \checkparencounts + \endgroup } -% #1, #2, #3 are the common arguments (see \parsebodycommon above). -% #4, delimited by the space, is the class name. -% -\def\defmethparsebody#1#2#3#4 {% - \parsebodycommon{#1}{#2}{#3}% - \def#2##1 {\defxbodycommon \activeparens \spacesplit{#3{##1}}}% - \begingroup\obeylines\activeparens - % The \empty here prevents misinterpretation of a construct such as - % @deffn {whatever} {Enharmonic comma} - % See comments at \deftpparsebody, although in our case we don't have - % to remove the \empty afterwards, since it is empty. - \spacesplit{#3{#4}}\empty -} +\def\Edefun{\endgraf\medbreak} -% Used for @deftypemethod and @deftypeivar. -% #1, #2, #3 are the common arguments (see \defparsebody). -% #4, delimited by a space, is the class name. -% #5 is the method's return type. +% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; +% the only thing remainnig is to define \deffnheader. % -\def\deftypemethparsebody#1#2#3#4 #5 {% - \parsebodycommon{#1}{#2}{#3}% - \def#2##1 ##2 {\defxbodycommon \activeparens \spacesplit{#3{##1}{##2}}}% - \begingroup\obeylines\activeparens - \spacesplit{#3{#4}{#5}}% +\def\makedefun#1{% + \expandafter\let\csname E#1\endcsname = \Edefun + \edef\temp{\noexpand\domakedefun + \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}% + \temp } -% Used for @deftypeop. The change from \deftypemethparsebody is an -% extra argument at the beginning which is the `category', instead of it -% being the hardwired string `Method' or `Instance Variable'. We have -% to account for this both in the \...x definition and in parsing the -% input at hand. Thus also need a control sequence (passed as #5) for -% the \E... definition to assign the category name to. +% \domakedefun \deffn \deffnx \deffnheader % -\def\deftypeopparsebody#1#2#3#4#5 #6 {% - \parsebodycommon{#1}{#2}{#3}% - \def#2##1 ##2 ##3 {\def#4{##1}% - \defxbodycommon \activeparens \spacesplit{#3{##2}{##3}}}% - \begingroup\obeylines\activeparens - \spacesplit{#3{#5}{#6}}% -} - -% For @defop. -\def\defopparsebody #1#2#3#4#5 {% - \parsebodycommon{#1}{#2}{#3}% - \def#2##1 ##2 {\def#4{##1}% - \defxbodycommon \activeparens \spacesplit{#3{##2}}}% - \begingroup\obeylines\activeparens - \spacesplit{#3{#5}}% -} - -% These parsing functions are similar to the preceding ones -% except that they do not make parens into active characters. -% These are used for "variables" since they have no arguments. +% Define \deffn and \deffnx, without parameters. +% \deffnheader has to be defined explicitly. % -\def\defvarparsebody #1#2#3{% - \parsebodycommon{#1}{#2}{#3}% - \def#2{\defxbodycommon \spacesplit#3}% - \catcode\equalChar=\active - \begingroup\obeylines - \spacesplit#3% -} - -% @defopvar. -\def\defopvarparsebody #1#2#3#4#5 {% - \parsebodycommon{#1}{#2}{#3}% - \def#2##1 ##2 {\def#4{##1}% - \defxbodycommon \spacesplit{#3{##2}}}% - \begingroup\obeylines - \spacesplit{#3{#5}}% -} - -\def\defvrparsebody#1#2#3#4 {% - \parsebodycommon{#1}{#2}{#3}% - \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}% - \begingroup\obeylines - \spacesplit{#3{#4}}% +\def\domakedefun#1#2#3{% + \envdef#1{% + \startdefun + \parseargusing\activeparens{\printdefunline#3}% + }% + \def#2{\dodefunx#1}% + \def#3% } -% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the -% type is just `struct', because we lose the braces in `{struct -% termios}' when \spacesplit reads its undelimited argument. Sigh. -% \let\deftpparsebody=\defvrparsebody -% -% So, to get around this, we put \empty in with the type name. That -% way, TeX won't find exactly `{...}' as an undelimited argument, and -% won't strip off the braces. -% -\def\deftpparsebody #1#2#3#4 {% - \parsebodycommon{#1}{#2}{#3}% - \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}% - \begingroup\obeylines - \spacesplit{\parsetpheaderline{#3{#4}}}\empty -} - -% Fine, but then we have to eventually remove the \empty *and* the -% braces (if any). That's what this does. -% -\def\removeemptybraces\empty#1\relax{#1} - -% After \spacesplit has done its work, this is called -- #1 is the final -% thing to call, #2 the type name (which starts with \empty), and #3 -% (which might be empty) the arguments. -% -\def\parsetpheaderline#1#2#3{% - #1{\removeemptybraces#2\relax}{#3}% -}% +%%% Untyped functions: -% Split up #2 (the rest of the input line) at the first space token. -% call #1 with two arguments: -% the first is all of #2 before the space token, -% the second is all of #2 after that space token. -% If #2 contains no space token, all of it is passed as the first arg -% and the second is passed as empty. -% -{\obeylines % - \gdef\spacesplit#1#2^^M{\endgroup\spacesplitx{#1}#2 \relax\spacesplitx}% - \long\gdef\spacesplitx#1#2 #3#4\spacesplitx{% - \ifx\relax #3% - #1{#2}{}% - \else % - #1{#2}{#3#4}% - \fi}% -} +% @deffn category name args +\makedefun{deffn}{\deffngeneral{}} -% Define @defun. +% @deffn category class name args +\makedefun{defop}#1 {\defopon{#1\ \putwordon}} -% This is called to end the arguments processing for all the @def... commands. -% -\def\defargscommonending{% - \interlinepenalty = 10000 - \advance\rightskip by 0pt plus 1fil - \endgraf - \nobreak\vskip -\parskip - \penalty 10002 % signal to \parsebodycommon. -} +% \defopon {category on}class name args +\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } -% This expands the args and terminates the paragraph they comprise. +% \deffngeneral {subind}category name args % -\def\defunargs#1{\functionparens \sl -% Expand, preventing hyphenation at `-' chars. -% Note that groups don't affect changes in \hyphenchar. -% Set the font temporarily and use \font in case \setfont made \tensl a macro. -{\tensl\hyphenchar\font=0}% -#1% -{\tensl\hyphenchar\font=45}% -\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi% - \defargscommonending +\def\deffngeneral#1#2 #3 #4\endheader{% + % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. + \dosubind{fn}{\code{#3}}{#1}% + \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% } -\def\deftypefunargs #1{% -% Expand, preventing hyphenation at `-' chars. -% Note that groups don't affect changes in \hyphenchar. -% Use \boldbraxnoamp, not \functionparens, so that & is not special. -\boldbraxnoamp -\tclose{#1}% avoid \code because of side effects on active chars - \defargscommonending -} +%%% Typed functions: -% Do complete processing of one @defun or @defunx line already parsed. +% @deftypefn category type name args +\makedefun{deftypefn}{\deftypefngeneral{}} -% @deffn Command forward-char nchars +% @deftypeop category class type name args +\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}} -\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader} +% \deftypeopon {category on}class type name args +\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } -\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}% -\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup % -\catcode\equalChar=\other % Turn off change made in \defparsebody +% \deftypefngeneral {subind}category type name args +% +\def\deftypefngeneral#1#2 #3 #4 #5\endheader{% + \dosubind{fn}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -% @defun == @deffn Function - -\def\defun{\defparsebody\Edefun\defunx\defunheader} +%%% Typed variables: -\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{\putwordDeffunc}% -\defunargs {#2}\endgroup % -\catcode\equalChar=\other % Turn off change made in \defparsebody -} +% @deftypevr category type var args +\makedefun{deftypevr}{\deftypecvgeneral{}} -% @deftypefun int foobar (int @var{foo}, float @var{bar}) +% @deftypecv category class type var args +\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}} -\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader} +% \deftypecvof {category of}class type var args +\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} } -% #1 is the data type. #2 is the name and args. -\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax} -% #1 is the data type, #2 the name, #3 the args. -\def\deftypefunheaderx #1#2 #3\relax{% -\doind {fn}{\code{#2}}% Make entry in function index -\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}% -\deftypefunargs {#3}\endgroup % -\catcode\equalChar=\other % Turn off change made in \defparsebody +% \deftypecvgeneral {subind}category type var args +% +\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{% + \dosubind{vr}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar}) - -\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader} +%%% Untyped variables: -% \defheaderxcond#1\relax$.$ -% puts #1 in @code, followed by a space, but does nothing if #1 is null. -\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi} +% @defvr category var args +\makedefun{defvr}#1 {\deftypevrheader{#1} {} } -% #1 is the classification. #2 is the data type. #3 is the name and args. -\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax} -% #1 is the classification, #2 the data type, #3 the name, #4 the args. -\def\deftypefnheaderx #1#2#3 #4\relax{% -\doind {fn}{\code{#3}}% Make entry in function index -\begingroup -\normalparens % notably, turn off `&' magic, which prevents -% at least some C++ text from working -\defname {\defheaderxcond#2\relax$.$#3}{#1}% -\deftypefunargs {#4}\endgroup % -\catcode\equalChar=\other % Turn off change made in \defparsebody -} - -% @defmac == @deffn Macro +% @defcv category class var args +\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}} -\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} +% \defcvof {category of}class var args +\def\defcvof#1#2 {\deftypecvof{#1}#2 {} } -\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{\putwordDefmac}% -\defunargs {#2}\endgroup % -\catcode\equalChar=\other % Turn off change made in \defparsebody +%%% Type: +% @deftp category name args +\makedefun{deftp}#1 #2 #3\endheader{% + \doind{tp}{\code{#2}}% + \defname{#1}{}{#2}\defunargs{#3\unskip}% } -% @defspec == @deffn Special Form +% Remaining @defun-like shortcuts: +\makedefun{defun}{\deffnheader{\putwordDeffunc} } +\makedefun{defmac}{\deffnheader{\putwordDefmac} } +\makedefun{defspec}{\deffnheader{\putwordDefspec} } +\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} } +\makedefun{defvar}{\defvrheader{\putwordDefvar} } +\makedefun{defopt}{\defvrheader{\putwordDefopt} } +\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} } +\makedefun{defmethod}{\defopon\putwordMethodon} +\makedefun{deftypemethod}{\deftypeopon\putwordMethodon} +\makedefun{defivar}{\defcvof\putwordInstanceVariableof} +\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof} -\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} - -\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{\putwordDefspec}% -\defunargs {#2}\endgroup % -\catcode\equalChar=\other % Turn off change made in \defparsebody -} - -% @defop CATEGORY CLASS OPERATION ARG... +% \defname, which formats the name of the @def (not the args). +% #1 is the category, such as "Function". +% #2 is the return type, if any. +% #3 is the function name. % -\def\defop #1 {\def\defoptype{#1}% -\defopparsebody\Edefop\defopx\defopheader\defoptype} +% We are followed by (but not passed) the arguments, if any. % -\def\defopheader#1#2#3{% - \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% function index entry - \begingroup - \defname{#2}{\defoptype\ \putwordon\ #1}% - \defunargs{#3}% - \endgroup +\def\defname#1#2#3{% + % Get the values of \leftskip and \rightskip as they were outside the @def... + \advance\leftskip by -\defbodyindent + % + % How we'll format the type name. Putting it in brackets helps + % distinguish it from the body text that may end up on the next line + % just below it. + \def\temp{#1}% + \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} + % + % Figure out line sizes for the paragraph shape. + % The first line needs space for \box0; but if \rightskip is nonzero, + % we need only space for the part of \box0 which exceeds it: + \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % The continuations: + \dimen2=\hsize \advance\dimen2 by -\defargsindent + % (plain.tex says that \dimen1 should be used only as global.) + \parshape 2 0in \dimen0 \defargsindent \dimen2 + % + % Put the type name to the right margin. + \noindent + \hbox to 0pt{% + \hfil\box0 \kern-\hsize + % \hsize has to be shortened this way: + \kern\leftskip + % Intentionally do not respect \rightskip, since we need the space. + }% + % + % Allow all lines to be underfull without complaint: + \tolerance=10000 \hbadness=10000 + \exdentamount=\defbodyindent + {% + % defun fonts. We use typewriter by default (used to be bold) because: + % . we're printing identifiers, they should be in tt in principle. + % . in languages with many accents, such as Czech or French, it's + % common to leave accents off identifiers. The result looks ok in + % tt, but exceedingly strange in rm. + % . we don't want -- and --- to be treated as ligatures. + % . this still does not fix the ?` and !` ligatures, but so far no + % one has made identifiers using them :). + \df \tt + \def\temp{#2}% return value type + \ifx\temp\empty\else \tclose{\temp} \fi + #3% output function name + }% + {\rm\enskip}% hskip 0.5 em of \tenrm + % + \boldbrax + % arguments will be output next, if any. } -% @deftypeop CATEGORY CLASS TYPE OPERATION ARG... -% -\def\deftypeop #1 {\def\deftypeopcategory{#1}% - \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader - \deftypeopcategory} +% Print arguments in slanted roman (not ttsl), inconsistently with using +% tt for the name. This is because literal text is sometimes needed in +% the argument list (groff manual), and ttsl and tt are not very +% distinguishable. Prevent hyphenation at `-' chars. % -% #1 is the class name, #2 the data type, #3 the operation name, #4 the args. -\def\deftypeopheader#1#2#3#4{% - \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index - \begingroup - \defname{\defheaderxcond#2\relax$.$#3} - {\deftypeopcategory\ \putwordon\ \code{#1}}% - \deftypefunargs{#4}% - \endgroup +\def\defunargs#1{% + % use sl by default (not ttsl), + % tt for the names. + \df \sl \hyphenchar\font=0 + % + % On the other hand, if an argument has two dashes (for instance), we + % want a way to get ttsl. Let's try @var for that. + \let\var=\ttslanted + #1% + \sl\hyphenchar\font=45 } -% @deftypemethod CLASS TYPE METHOD ARG... -% -\def\deftypemethod{% - \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader} +% We want ()&[] to print specially on the defun line. % -% #1 is the class name, #2 the data type, #3 the method name, #4 the args. -\def\deftypemethodheader#1#2#3#4{% - \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index - \begingroup - \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}% - \deftypefunargs{#4}% - \endgroup +\def\activeparens{% + \catcode`\(=\active \catcode`\)=\active + \catcode`\[=\active \catcode`\]=\active + \catcode`\&=\active } -% @deftypeivar CLASS TYPE VARNAME -% -\def\deftypeivar{% - \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader} -% -% #1 is the class name, #2 the data type, #3 the variable name. -\def\deftypeivarheader#1#2#3{% - \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index - \begingroup - \defname{\defheaderxcond#2\relax$.$#3} - {\putwordInstanceVariableof\ \code{#1}}% - \defvarargs{#3}% - \endgroup -} +% Make control sequences which act like normal parenthesis chars. +\let\lparen = ( \let\rparen = ) -% @defmethod == @defop Method -% -\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} -% -% #1 is the class name, #2 the method name, #3 the args. -\def\defmethodheader#1#2#3{% - \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index - \begingroup - \defname{#2}{\putwordMethodon\ \code{#1}}% - \defunargs{#3}% - \endgroup -} +% Be sure that we always have a definition for `(', etc. For example, +% if the fn name has parens in it, \boldbrax will not be in effect yet, +% so TeX would otherwise complain about undefined control sequence. +{ + \activeparens + \global\let(=\lparen \global\let)=\rparen + \global\let[=\lbrack \global\let]=\rbrack + \global\let& = \& -% @defcv {Class Option} foo-class foo-flag + \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} + \gdef\magicamp{\let&=\amprm} +} -\def\defcv #1 {\def\defcvtype{#1}% -\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} +\newcount\parencount -\def\defcvarheader #1#2#3{% - \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% variable index entry - \begingroup - \defname{#2}{\defcvtype\ \putwordof\ #1}% - \defvarargs{#3}% - \endgroup +% If we encounter &foo, then turn on ()-hacking afterwards +\newif\ifampseen +\def\amprm#1 {\ampseentrue{\bf\ }} + +\def\parenfont{% + \ifampseen + % At the first level, print parens in roman, + % otherwise use the default font. + \ifnum \parencount=1 \rm \fi + \else + % The \sf parens (in \boldbrax) actually are a little bolder than + % the contained text. This is especially needed for [ and ] . + \sf + \fi } - -% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME -% -\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} -% -\def\defivarheader#1#2#3{% - \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% entry in var index - \begingroup - \defname{#2}{\putwordInstanceVariableof\ #1}% - \defvarargs{#3}% - \endgroup +\def\infirstlevel#1{% + \ifampseen + \ifnum\parencount=1 + #1% + \fi + \fi } +\def\bfafterword#1 {#1 \bf} -% @defvar -% First, define the processing that is wanted for arguments of @defvar. -% This is actually simple: just print them in roman. -% This must expand the args and terminate the paragraph they make up -\def\defvarargs #1{\normalparens #1% - \defargscommonending +\def\opnr{% + \global\advance\parencount by 1 + {\parenfont(}% + \infirstlevel \bfafterword } - -% @defvr Counter foo-count - -\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader} - -\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}% -\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup} - -% @defvar == @defvr Variable - -\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader} - -\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{\putwordDefvar}% -\defvarargs {#2}\endgroup % +\def\clnr{% + {\parenfont)}% + \infirstlevel \sl + \global\advance\parencount by -1 } -% @defopt == @defvr {User Option} - -\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader} - -\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{\putwordDefopt}% -\defvarargs {#2}\endgroup % +\newcount\brackcount +\def\lbrb{% + \global\advance\brackcount by 1 + {\bf[}% +} +\def\rbrb{% + {\bf]}% + \global\advance\brackcount by -1 } -% @deftypevar int foobar - -\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader} - -% #1 is the data type. #2 is the name, perhaps followed by text that -% is actually part of the data type, which should not be put into the index. -\def\deftypevarheader #1#2{% -\dovarind#2 \relax% Make entry in variables index -\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}% - \defargscommonending -\endgroup} -\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}} - -% @deftypevr {Global Flag} int enable - -\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} - -\def\deftypevrheader #1#2#3{\dovarind#3 \relax% -\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1} - \defargscommonending -\endgroup} - -% Now define @deftp -% Args are printed in bold, a slight difference from @defvar. - -\def\deftpargs #1{\bf \defvarargs{#1}} - -% @deftp Class window height width ... - -\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader} - -\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% -\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} - -% These definitions are used if you use @defunx (etc.) -% anywhere other than immediately after a @defun or @defunx. -% -\def\defcvx#1 {\errmessage{@defcvx in invalid context}} -\def\deffnx#1 {\errmessage{@deffnx in invalid context}} -\def\defivarx#1 {\errmessage{@defivarx in invalid context}} -\def\defmacx#1 {\errmessage{@defmacx in invalid context}} -\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}} -\def\defoptx #1 {\errmessage{@defoptx in invalid context}} -\def\defopx#1 {\errmessage{@defopx in invalid context}} -\def\defspecx#1 {\errmessage{@defspecx in invalid context}} -\def\deftpx#1 {\errmessage{@deftpx in invalid context}} -\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}} -\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}} -\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}} -\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}} -\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}} -\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}} -\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}} -\def\defunx#1 {\errmessage{@defunx in invalid context}} -\def\defvarx#1 {\errmessage{@defvarx in invalid context}} -\def\defvrx#1 {\errmessage{@defvrx in invalid context}} +\def\checkparencounts{% + \ifnum\parencount=0 \else \badparencount \fi + \ifnum\brackcount=0 \else \badbrackcount \fi +} +\def\badparencount{% + \errmessage{Unbalanced parentheses in @def}% + \global\parencount=0 +} +\def\badbrackcount{% + \errmessage{Unbalanced square braces in @def}% + \global\brackcount=0 +} \message{macros,} @@ -5557,42 +5637,69 @@ width0pt\relax} \fi % To do this right we need a feature of e-TeX, \scantokens, % which we arrange to emulate with a temporary file in ordinary TeX. \ifx\eTeXversion\undefined - \newwrite\macscribble - \def\scanmacro#1{% - \begingroup \newlinechar`\^^M - % Undo catcode changes of \startcontents and \doprintindex - \catcode`\@=0 \catcode`\\=\other \escapechar=`\@ - % Append \endinput to make sure that TeX does not see the ending newline. - \toks0={#1\endinput}% - \immediate\openout\macscribble=\jobname.tmp - \immediate\write\macscribble{\the\toks0}% - \immediate\closeout\macscribble - \let\xeatspaces\eatspaces - \input \jobname.tmp - \endgroup -} -\else -\def\scanmacro#1{% -\begingroup \newlinechar`\^^M -% Undo catcode changes of \startcontents and \doprintindex -\catcode`\@=0 \catcode`\\=\other \escapechar=`\@ -\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup} + \newwrite\macscribble + \def\scantokens#1{% + \toks0={#1}% + \immediate\openout\macscribble=\jobname.tmp + \immediate\write\macscribble{\the\toks0}% + \immediate\closeout\macscribble + \input \jobname.tmp + } \fi +\def\scanmacro#1{% + \begingroup + \newlinechar`\^^M + \let\xeatspaces\eatspaces + % Undo catcode changes of \startcontents and \doprintindex + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. Previously, we had + % \catcode`\\=\other instead. We'll see whether a problem appears + % with macro expansion. --kasal, 19aug04 + \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ + % ... and \example + \spaceisspace + % + % Append \endinput to make sure that TeX does not see the ending newline. + % + % I've verified that it is necessary both for e-TeX and for ordinary TeX + % --kasal, 29nov03 + \scantokens{#1\endinput}% + \endgroup +} + +\def\scanexp#1{% + \edef\temp{\noexpand\scanmacro{#1}}% + \temp +} + \newcount\paramno % Count of parameters \newtoks\macname % Macro name \newif\ifrecursive % Is it recursive? -\def\macrolist{} % List of all defined macros in the form - % \do\macro1\do\macro2... + +% List of all defined macros in the form +% \definedummyword\macro1\definedummyword\macro2... +% Currently is also contains all @aliases; the list can be split +% if there is a need. +\def\macrolist{} + +% Add the macro to \macrolist +\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname} +\def\addtomacrolistxxx#1{% + \toks0 = \expandafter{\macrolist\definedummyword#1}% + \xdef\macrolist{\the\toks0}% +} % Utility routines. -% Thisdoes \let #1 = #2, except with \csnames. +% This does \let #1 = #2, with \csnames; that is, +% \let \csname#1\endcsname = \csname#2\endcsname +% (except of course we have to play expansion games). +% \def\cslet#1#2{% -\expandafter\expandafter -\expandafter\let -\expandafter\expandafter -\csname#1\endcsname -\csname#2\endcsname} + \expandafter\let + \csname#1\expandafter\endcsname + \csname#2\endcsname +} % Trim leading and trailing spaces off a string. % Concepts from aro-bend problem 15 (see CTAN). @@ -5619,30 +5726,36 @@ width0pt\relax} \fi % done by making ^^M (\endlinechar) catcode 12 when reading the macro % body, and then making it the \newlinechar in \scanmacro. -\def\macrobodyctxt{% - \catcode`\~=\other +\def\scanctxt{% + \catcode`\"=\other + \catcode`\+=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\@=\other \catcode`\^=\other \catcode`\_=\other \catcode`\|=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\+=\other + \catcode`\~=\other +} + +\def\scanargctxt{% + \scanctxt + \catcode`\\=\other + \catcode`\^^M=\other +} + +\def\macrobodyctxt{% + \scanctxt \catcode`\{=\other \catcode`\}=\other - \catcode`\@=\other \catcode`\^^M=\other - \usembodybackslash} + \usembodybackslash +} \def\macroargctxt{% - \catcode`\~=\other - \catcode`\^=\other - \catcode`\_=\other - \catcode`\|=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\+=\other - \catcode`\@=\other - \catcode`\\=\other} + \scanctxt + \catcode`\\=\other +} % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N @@ -5673,25 +5786,21 @@ width0pt\relax} \fi \else \errmessage{Macro name \the\macname\space already defined}\fi \global\cslet{macsave.\the\macname}{\the\macname}% \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% - % Add the macroname to \macrolist - \toks0 = \expandafter{\macrolist\do}% - \xdef\macrolist{\the\toks0 - \expandafter\noexpand\csname\the\macname\endcsname}% + \addtomacrolist{\the\macname}% \fi \begingroup \macrobodyctxt \ifrecursive \expandafter\parsermacbody \else \expandafter\parsemacbody \fi} -\def\unmacro{\parsearg\dounmacro} -\def\dounmacro#1{% +\parseargdef\unmacro{% \if1\csname ismacro.#1\endcsname \global\cslet{#1}{macsave.#1}% \global\expandafter\let \csname ismacro.#1\endcsname=0% % Remove the macro name from \macrolist: \begingroup \expandafter\let\csname#1\endcsname \relax - \let\do\unmacrodo + \let\definedummyword\unmacrodo \xdef\macrolist{\macrolist}% \endgroup \else @@ -5703,10 +5812,10 @@ width0pt\relax} \fi % macro definitions that have been changed to \relax. % \def\unmacrodo#1{% - \ifx#1\relax + \ifx #1\relax % remove this \else - \noexpand\do \noexpand #1% + \noexpand\definedummyword \noexpand#1% \fi } @@ -5825,25 +5934,23 @@ width0pt\relax} \fi \expandafter\parsearg \fi \next} -% We mant to disable all macros during \shipout so that they are not -% expanded by \write. -\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% - \edef\next{\macrolist}\expandafter\endgroup\next} - % @alias. % We need some trickery to remove the optional spaces around the equal % sign. Just make them active and then expand them all to nothing. -\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx} +\def\alias{\parseargusing\obeyspaces\aliasxxx} \def\aliasxxx #1{\aliasyyy#1\relax} -\def\aliasyyy #1=#2\relax{\ignoreactivespaces -\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=% - \expandafter\noexpand\csname#2\endcsname}% -\expandafter\endgroup\next} +\def\aliasyyy #1=#2\relax{% + {% + \expandafter\let\obeyedspace=\empty + \addtomacrolist{#1}% + \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% + }% + \next +} \message{cross references,} -% @xref etc. \newwrite\auxfile @@ -5855,64 +5962,68 @@ width0pt\relax} \fi \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, node \samp{\ignorespaces#1{}}} -% @node's job is to define \lastnode. -\def\node{\ENVcheck\parsearg\nodezzz} -\def\nodezzz#1{\nodexxx #1,\finishnodeparse} -\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}} +% @node's only job in TeX is to define \lastnode, which is used in +% cross-references. The @node line might or might not have commas, and +% might or might not have spaces before the first comma, like: +% @node foo , bar , ... +% We don't want such trailing spaces in the node name. +% +\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse} +% +% also remove a trailing comma, in case of something like this: +% @node Help-Cross, , , Cross-refs +\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} +\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} + \let\nwnode=\node -\let\lastnode=\relax - -% The sectioning commands (@chapter, etc.) call these. -\def\donoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}% - {Ysectionnumberandtype}% - \global\let\lastnode=\relax - \fi -} -\def\unnumbnoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}% - \global\let\lastnode=\relax - \fi -} -\def\appendixnoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}% - {Yappendixletterandtype}% - \global\let\lastnode=\relax +\let\lastnode=\empty + +% Write a cross-reference definition for the current node. #1 is the +% type (Ynumbered, Yappendix, Ynothing). +% +\def\donoderef#1{% + \ifx\lastnode\empty\else + \setref{\lastnode}{#1}% + \global\let\lastnode=\empty \fi } - % @anchor{NAME} -- define xref target at arbitrary point. % \newcount\savesfregister -\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} -\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} -\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} +% +\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an -% anchor), namely NAME-title (the corresponding @chapter/etc. name), -% NAME-pg (the page number), and NAME-snt (section number and type). -% Called from \foonoderef. -% -% We have to set \indexdummies so commands such as @code in a section -% title aren't expanded. It would be nicer not to expand the titles in -% the first place, but there's so many layers that that is hard to do. -% -% Likewise, use \turnoffactive so that punctuation chars such as underscore -% and backslash work in node names. -% -\def\setref#1#2{{% - \atdummies +% anchor), which consists of three parts: +% 1) NAME-title - the current sectioning name taken from \thissection, +% or the anchor name. +% 2) NAME-snt - section number and type, passed as the SNT arg, or +% empty for anchors. +% 3) NAME-pg - the page number. +% +% This is called from \donoderef, \anchor, and \dofloat. In the case of +% floats, there is an additional part, which is not written here: +% 4) NAME-lof - the text as it should appear in a @listoffloats. +% +\def\setref#1#2{% \pdfmkdest{#1}% - % - \turnoffactive - \dosetq{#1-title}{Ytitle}% - \dosetq{#1-pg}{Ypagenumber}% - \dosetq{#1-snt}{#2}% -}} + \iflinks + {% + \atdummies % preserve commands, but don't expand them + \edef\writexrdef##1##2{% + \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef + ##1}{##2}}% these are parameters of \writexrdef + }% + \toks0 = \expandafter{\thissection}% + \immediate \writexrdef{title}{\the\toks0 }% + \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. + \writexrdef{pg}{\folio}% will be written later, during \shipout + }% + \fi +} % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed @@ -5925,105 +6036,125 @@ width0pt\relax} \fi \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup \unsepspaces \def\printedmanual{\ignorespaces #5}% - \def\printednodename{\ignorespaces #3}% - \setbox1=\hbox{\printedmanual}% - \setbox0=\hbox{\printednodename}% + \def\printedrefname{\ignorespaces #3}% + \setbox1=\hbox{\printedmanual\unskip}% + \setbox0=\hbox{\printedrefname\unskip}% \ifdim \wd0 = 0pt % No printed node name was explicitly given. \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax % Use the node name inside the square brackets. - \def\printednodename{\ignorespaces #1}% + \def\printedrefname{\ignorespaces #1}% \else % Use the actual chapter/section title appear inside % the square brackets. Use the real section title if we have it. \ifdim \wd1 > 0pt % It is in another manual, so we don't have it. - \def\printednodename{\ignorespaces #1}% + \def\printedrefname{\ignorespaces #1}% \else \ifhavexrefs % We know the real title if we have the xref values. - \def\printednodename{\refx{#1-title}{}}% + \def\printedrefname{\refx{#1-title}{}}% \else % Otherwise just copy the Info node name. - \def\printednodename{\ignorespaces #1}% + \def\printedrefname{\ignorespaces #1}% \fi% \fi \fi \fi % - % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not - % insert empty discretionaries after hyphens, which means that it will - % not find a line break at a hyphen in a node names. Since some manuals - % are best written with fairly long node names, containing hyphens, this - % is a loss. Therefore, we give the text of the node name again, so it - % is as if TeX is seeing it for the first time. + % Make link in pdf output. \ifpdf \leavevmode \getfilename{#4}% - {\turnoffactive \otherbackslash + {\turnoffactive + % See comments at \activebackslashdouble. + {\activebackslashdouble \xdef\pdfxrefdest{#1}% + \backslashparens\pdfxrefdest}% + % \ifnum\filenamelength>0 \startlink attr{/Border [0 0 0]}% - goto file{\the\filename.pdf} name{#1}% + goto file{\the\filename.pdf} name{\pdfxrefdest}% \else \startlink attr{/Border [0 0 0]}% - goto name{#1}% + goto name{\pdfmkpgn{\pdfxrefdest}}% \fi }% \linkcolor \fi % - \ifdim \wd1 > 0pt - \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}% - \else - % _ (for example) has to be the character _ for the purposes of the - % control sequence corresponding to the node, but it has to expand - % into the usual \leavevmode...\vrule stuff for purposes of - % printing. So we \turnoffactive for the \refx-snt, back on for the - % printing, back off for the \refx-pg. - {\turnoffactive \otherbackslash - % Only output a following space if the -snt ref is nonempty; for - % @unnumbered and @anchor, it won't be. - \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% - \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi - }% - % output the `[mynode]' via a macro. - \xrefprintnodename\printednodename + % Float references are printed completely differently: "Figure 1.2" + % instead of "[somenode], p.3". We distinguish them by the + % LABEL-title being set to a magic string. + {% + % Have to otherify everything special to allow the \csname to + % include an _ in the xref name, etc. + \indexnofonts + \turnoffactive + \expandafter\global\expandafter\let\expandafter\Xthisreftitle + \csname XR#1-title\endcsname + }% + \iffloat\Xthisreftitle + % If the user specified the print name (third arg) to the ref, + % print it instead of our usual "Figure 1.2". + \ifdim\wd0 = 0pt + \refx{#1-snt}{}% + \else + \printedrefname + \fi % - % But we always want a comma and a space: - ,\space + % if the user also gave the printed manual name (fifth arg), append + % "in MANUALNAME". + \ifdim \wd1 > 0pt + \space \putwordin{} \cite{\printedmanual}% + \fi + \else + % node/anchor (non-float) references. % - % output the `page 3'. - \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}% + % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not + % insert empty discretionaries after hyphens, which means that it will + % not find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, this + % is a loss. Therefore, we give the text of the node name again, so it + % is as if TeX is seeing it for the first time. + \ifdim \wd1 > 0pt + \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% + \else + % _ (for example) has to be the character _ for the purposes of the + % control sequence corresponding to the node, but it has to expand + % into the usual \leavevmode...\vrule stuff for purposes of + % printing. So we \turnoffactive for the \refx-snt, back on for the + % printing, back off for the \refx-pg. + {\turnoffactive + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + }% + % output the `[mynode]' via a macro so it can be overridden. + \xrefprintnodename\printedrefname + % + % But we always want a comma and a space: + ,\space + % + % output the `page 3'. + \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + \fi \fi \endlink \endgroup} % This macro is called from \xrefX for the `[nodename]' part of xref % output. It's a separate macro only so it can be changed more easily, -% since not square brackets don't work in some documents. Particularly +% since square brackets don't work well in some documents. Particularly % one that Bob is working on :). % \def\xrefprintnodename#1{[#1]} -% \dosetq is called from \setref to do the actual \write (\iflinks). -% -\def\dosetq#1#2{% - {\let\folio=0% - \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}% - \iflinks \next \fi - }% -} - -% \internalsetq{foo}{page} expands into -% CHARACTERS @xrdef{foo}{...expansion of \page...} -\def\internalsetq#1#2{@xrdef{#1}{\csname #2\endcsname}} - -% Things to be expanded by \internalsetq. +% Things referred to by \setref. % -\def\Ypagenumber{\folio} -\def\Ytitle{\thissection} \def\Ynothing{} -\def\Ysectionnumberandtype{% +\def\Yomitfromtoc{} +\def\Ynumbered{% \ifnum\secno=0 \putwordChapter@tie \the\chapno \else \ifnum\subsecno=0 @@ -6034,8 +6165,7 @@ width0pt\relax} \fi \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno \fi\fi\fi } - -\def\Yappendixletterandtype{% +\def\Yappendix{% \ifnum\secno=0 \putwordAppendix@tie @char\the\appendixno{}% \else \ifnum\subsecno=0 @@ -6048,15 +6178,6 @@ width0pt\relax} \fi \fi\fi\fi } -% Use TeX 3.0's \inputlineno to get the line number, for better error -% messages, but if we're using an old version of TeX, don't do anything. -% -\ifx\inputlineno\thisisundefined - \let\linenumber = \empty % Pre-3.0. -\else - \def\linenumber{\the\inputlineno:\space} -\fi - % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. % If its value is nonempty, SUFFIX is output afterward. % @@ -6065,7 +6186,7 @@ width0pt\relax} \fi \indexnofonts \otherbackslash \expandafter\global\expandafter\let\expandafter\thisrefX - \csname X#1\endcsname + \csname XR#1\endcsname }% \ifx\thisrefX\relax % If not defined, say something at least. @@ -6087,12 +6208,45 @@ width0pt\relax} \fi #2% Output the suffix in any case. } -% This is the macro invoked by entries in the aux file. +% This is the macro invoked by entries in the aux file. Usually it's +% just a \def (we prepend XR to the control sequence name to avoid +% collisions). But if this is a float type, we have more work to do. % -\def\xrdef#1{\expandafter\gdef\csname X#1\endcsname} +\def\xrdef#1#2{% + \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value. + % + % Was that xref control sequence that we just defined for a float? + \expandafter\iffloat\csname XR#1\endcsname + % it was a float, and we have the (safe) float type in \iffloattype. + \expandafter\let\expandafter\floatlist + \csname floatlist\iffloattype\endcsname + % + % Is this the first time we've seen this float type? + \expandafter\ifx\floatlist\relax + \toks0 = {\do}% yes, so just \do + \else + % had it before, so preserve previous elements in list. + \toks0 = \expandafter{\floatlist\do}% + \fi + % + % Remember this xref in the control sequence \floatlistFLOATTYPE, + % for later use in \listoffloats. + \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}% + \fi +} % Read the last existing aux file, if any. No error if none exists. -\def\readauxfile{\begingroup +% +\def\tryauxfile{% + \openin 1 \jobname.aux + \ifeof 1 \else + \readdatafile{aux}% + \global\havexrefstrue + \fi + \closein 1 +} + +\def\setupdatafile{% \catcode`\^^@=\other \catcode`\^^A=\other \catcode`\^^B=\other @@ -6150,41 +6304,39 @@ width0pt\relax} \fi \catcode`\%=\other \catcode`+=\other % avoid \+ for paranoia even though we've turned it off % - % Make the characters 128-255 be printing characters + % This is to support \ in node names and titles, since the \ + % characters end up in a \csname. It's easier than + % leaving it active and making its active definition an actual \ + % character. What I don't understand is why it works in the *value* + % of the xrdef. Seems like it should be a catcode12 \, and that + % should not typeset properly. But it works, so I'm moving on for + % now. --karl, 15jan04. + \catcode`\\=\other + % + % Make the characters 128-255 be printing characters. {% - \count 1=128 + \count1=128 \def\loop{% - \catcode\count 1=\other - \advance\count 1 by 1 - \ifnum \count 1<256 \loop \fi + \catcode\count1=\other + \advance\count1 by 1 + \ifnum \count1<256 \loop \fi }% }% % - % Turn off \ as an escape so we do not lose on - % entries which were dumped with control sequences in their names. - % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^ - % Reference to such entries still does not work the way one would wish, - % but at least they do not bomb out when the aux file is read in. - \catcode`\\=\other - % - % @ is our escape character in .aux files. + % @ is our escape character in .aux files, and we need braces. \catcode`\{=1 \catcode`\}=2 \catcode`\@=0 - % - \openin 1 \jobname.aux - \ifeof 1 \else - \closein 1 - \input \jobname.aux - \global\havexrefstrue - \global\warnedobstrue - \fi - % Open the new aux file. TeX will close it automatically at exit. - \openout\auxfile=\jobname.aux -\endgroup} +} +\def\readdatafile#1{% +\begingroup + \setupdatafile + \input\jobname.#1 +\endgroup} -% Footnotes. +\message{insertions,} +% including footnotes. \newcount \footnoteno @@ -6198,13 +6350,12 @@ width0pt\relax} \fi % @footnotestyle is meaningful for info output only. \let\footnotestyle=\comment -\let\ptexfootnote=\footnote - {\catcode `\@=11 % % Auto-number footnotes. Otherwise like plain. \gdef\footnote{% \let\indent=\ptexindent + \let\noindent=\ptexnoindent \global\advance\footnoteno by \@ne \edef\thisfootno{$^{\the\footnoteno}$}% % @@ -6222,17 +6373,12 @@ width0pt\relax} \fi % Don't bother with the trickery in plain.tex to not require the % footnote text as a parameter. Our footnotes don't need to be so general. % -% Oh yes, they do; otherwise, @ifset and anything else that uses -% \parseargline fail inside footnotes because the tokens are fixed when +% Oh yes, they do; otherwise, @ifset (and anything else that uses +% \parseargline) fails inside footnotes because the tokens are fixed when % the footnote is read. --karl, 16nov96. % -% The start of the footnote looks usually like this: -\gdef\startfootins{\insert\footins\bgroup} -% -% ... but this macro is redefined inside @multitable. -% \gdef\dofootnote{% - \startfootins + \insert\footins\bgroup % We want to typeset this text as a normal paragraph, even if the % footnote reference occurs in (for example) a display environment. % So reset some parameters. @@ -6268,40 +6414,66 @@ width0pt\relax} \fi } }%end \catcode `\@=11 -% @| inserts a changebar to the left of the current line. It should -% surround any changed text. This approach does *not* work if the -% change spans more than two lines of output. To handle that, we would -% have adopt a much more difficult approach (putting marks into the main -% vertical list for the beginning and end of each change). +% In case a @footnote appears in a vbox, save the footnote text and create +% the real \insert just after the vbox finished. Otherwise, the insertion +% would be lost. +% Similarily, if a @footnote appears inside an alignment, save the footnote +% text to a box and make the \insert when a row of the table is finished. +% And the same can be done for other insert classes. --kasal, 16nov03. + +% Replace the \insert primitive by a cheating macro. +% Deeper inside, just make sure that the saved insertions are not spilled +% out prematurely. % -\def\|{% - % \vadjust can only be used in horizontal mode. - \leavevmode - % - % Append this vertical mode material after the current line in the output. - \vadjust{% - % We want to insert a rule with the height and depth of the current - % leading; that is exactly what \strutbox is supposed to record. - \vskip-\baselineskip - % - % \vadjust-items are inserted at the left edge of the type. So - % the \llap here moves out into the left-hand margin. - \llap{% - % - % For a thicker or thinner bar, change the `1pt'. - \vrule height\baselineskip width1pt - % - % This is the space between the bar and the text. - \hskip 12pt - }% - }% +\def\startsavinginserts{% + \ifx \insert\ptexinsert + \let\insert\saveinsert + \else + \let\checkinserts\relax + \fi } -% For a final copy, take out the rectangles -% that mark overfull boxes (in case you have decided -% that the text looks ok even though it passes the margin). +% This \insert replacement works for both \insert\footins{foo} and +% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}. % -\def\finalout{\overfullrule=0pt} +\def\saveinsert#1{% + \edef\next{\noexpand\savetobox \makeSAVEname#1}% + \afterassignment\next + % swallow the left brace + \let\temp = +} +\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}} +\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1} + +\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi} + +\def\placesaveins#1{% + \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname + {\box#1}% +} + +% eat @SAVE -- beware, all of them have catcode \other: +{ + \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-) + \gdef\gobblesave @SAVE{} +} + +% initialization: +\def\newsaveins #1{% + \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}% + \next +} +\def\newsaveinsX #1{% + \csname newbox\endcsname #1% + \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts + \checksaveins #1}% +} + +% initialize: +\let\checkinserts\empty +\newsaveins\footins +\newsaveins\margin + % @image. We use the macros from epsf.tex to support this. % If epsf.tex is not installed and @image is used, we complain. @@ -6311,12 +6483,12 @@ width0pt\relax} \fi % undone and the next image would fail. \openin 1 = epsf.tex \ifeof 1 \else - \closein 1 % Do not bother showing banner with epsf.tex v2.7k (available in % doc/epsf.tex and on ctan). \def\epsfannounce{\toks0 = }% \input epsf.tex \fi +\closein 1 % % We will only complain once about lack of epsf.tex. \newif\ifwarnednoepsf @@ -6355,7 +6527,7 @@ width0pt\relax} \fi % above and below. \nobreak\vskip\parskip \nobreak - \line\bgroup\hss + \line\bgroup \fi % % Output the image. @@ -6368,10 +6540,275 @@ width0pt\relax} \fi \epsfbox{#1.eps}% \fi % - \ifimagevmode \hss \egroup \bigbreak \fi % space after the image + \ifimagevmode \egroup \bigbreak \fi % space after the image \endgroup} +% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables, +% etc. We don't actually implement floating yet, we always include the +% float "here". But it seemed the best name for the future. +% +\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish} + +% There may be a space before second and/or third parameter; delete it. +\def\eatcommaspace#1, {#1,} + +% #1 is the optional FLOATTYPE, the text label for this float, typically +% "Figure", "Table", "Example", etc. Can't contain commas. If omitted, +% this float will not be numbered and cannot be referred to. +% +% #2 is the optional xref label. Also must be present for the float to +% be referable. +% +% #3 is the optional positioning argument; for now, it is ignored. It +% will somehow specify the positions allowed to float to (here, top, bottom). +% +% We keep a separate counter for each FLOATTYPE, which we reset at each +% chapter-level command. +\let\resetallfloatnos=\empty +% +\def\dofloat#1,#2,#3,#4\finish{% + \let\thiscaption=\empty + \let\thisshortcaption=\empty + % + % don't lose footnotes inside @float. + % + % BEWARE: when the floats start float, we have to issue warning whenever an + % insert appears inside a float which could possibly float. --kasal, 26may04 + % + \startsavinginserts + % + % We can't be used inside a paragraph. + \par + % + \vtop\bgroup + \def\floattype{#1}% + \def\floatlabel{#2}% + \def\floatloc{#3}% we do nothing with this yet. + % + \ifx\floattype\empty + \let\safefloattype=\empty + \else + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + \fi + % + % If label is given but no type, we handle that as the empty type. + \ifx\floatlabel\empty \else + % We want each FLOATTYPE to be numbered separately (Figure 1, + % Table 1, Figure 2, ...). (And if no label, no number.) + % + \expandafter\getfloatno\csname\safefloattype floatno\endcsname + \global\advance\floatno by 1 + % + {% + % This magic value for \thissection is output by \setref as the + % XREFLABEL-title value. \xrefX uses it to distinguish float + % labels (which have a completely different output format) from + % node and anchor labels. And \xrdef uses it to construct the + % lists of floats. + % + \edef\thissection{\floatmagic=\safefloattype}% + \setref{\floatlabel}{Yfloat}% + }% + \fi + % + % start with \parskip glue, I guess. + \vskip\parskip + % + % Don't suppress indentation if a float happens to start a section. + \restorefirstparagraphindent +} + +% we have these possibilities: +% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap +% @float Foo,lbl & no caption: Foo 1.1 +% @float Foo & @caption{Cap}: Foo: Cap +% @float Foo & no caption: Foo +% @float ,lbl & Caption{Cap}: 1.1: Cap +% @float ,lbl & no caption: 1.1 +% @float & @caption{Cap}: Cap +% @float & no caption: +% +\def\Efloat{% + \let\floatident = \empty + % + % In all cases, if we have a float type, it comes first. + \ifx\floattype\empty \else \def\floatident{\floattype}\fi + % + % If we have an xref label, the number comes next. + \ifx\floatlabel\empty \else + \ifx\floattype\empty \else % if also had float type, need tie first. + \appendtomacro\floatident{\tie}% + \fi + % the number. + \appendtomacro\floatident{\chaplevelprefix\the\floatno}% + \fi + % + % Start the printed caption with what we've constructed in + % \floatident, but keep it separate; we need \floatident again. + \let\captionline = \floatident + % + \ifx\thiscaption\empty \else + \ifx\floatident\empty \else + \appendtomacro\captionline{: }% had ident, so need a colon between + \fi + % + % caption text. + \appendtomacro\captionline{\scanexp\thiscaption}% + \fi + % + % If we have anything to print, print it, with space before. + % Eventually this needs to become an \insert. + \ifx\captionline\empty \else + \vskip.5\parskip + \captionline + % + % Space below caption. + \vskip\parskip + \fi + % + % If have an xref label, write the list of floats info. Do this + % after the caption, to avoid chance of it being a breakpoint. + \ifx\floatlabel\empty \else + % Write the text that goes in the lof to the aux file as + % \floatlabel-lof. Besides \floatident, we include the short + % caption if specified, else the full caption if specified, else nothing. + {% + \atdummies + % + % since we read the caption text in the macro world, where ^^M + % is turned into a normal character, we have to scan it back, so + % we don't write the literal three characters "^^M" into the aux file. + \scanexp{% + \xdef\noexpand\gtemp{% + \ifx\thisshortcaption\empty + \thiscaption + \else + \thisshortcaption + \fi + }% + }% + \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident + \ifx\gtemp\empty \else : \gtemp \fi}}% + }% + \fi + \egroup % end of \vtop + % + % place the captured inserts + % + % BEWARE: when the floats start floating, we have to issue warning + % whenever an insert appears inside a float which could possibly + % float. --kasal, 26may04 + % + \checkinserts +} + +% Append the tokens #2 to the definition of macro #1, not expanding either. +% +\def\appendtomacro#1#2{% + \expandafter\def\expandafter#1\expandafter{#1#2}% +} + +% @caption, @shortcaption +% +\def\caption{\docaption\thiscaption} +\def\shortcaption{\docaption\thisshortcaption} +\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption} +\def\defcaption#1#2{\egroup \def#1{#2}} + +% The parameter is the control sequence identifying the counter we are +% going to use. Create it if it doesn't exist and assign it to \floatno. +\def\getfloatno#1{% + \ifx#1\relax + % Haven't seen this figure type before. + \csname newcount\endcsname #1% + % + % Remember to reset this floatno at the next chap. + \expandafter\gdef\expandafter\resetallfloatnos + \expandafter{\resetallfloatnos #1=0 }% + \fi + \let\floatno#1% +} + +% \setref calls this to get the XREFLABEL-snt value. We want an @xref +% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we +% first read the @float command. +% +\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% + +% Magic string used for the XREFLABEL-title value, so \xrefX can +% distinguish floats from other xref types. +\def\floatmagic{!!float!!} + +% #1 is the control sequence we are passed; we expand into a conditional +% which is true if #1 represents a float ref. That is, the magic +% \thissection value which we \setref above. +% +\def\iffloat#1{\expandafter\doiffloat#1==\finish} +% +% #1 is (maybe) the \floatmagic string. If so, #2 will be the +% (safe) float type for this float. We set \iffloattype to #2. +% +\def\doiffloat#1=#2=#3\finish{% + \def\temp{#1}% + \def\iffloattype{#2}% + \ifx\temp\floatmagic +} + +% @listoffloats FLOATTYPE - print a list of floats like a table of contents. +% +\parseargdef\listoffloats{% + \def\floattype{#1}% floattype + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + % + % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE. + \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax + \ifhavexrefs + % if the user said @listoffloats foo but never @float foo. + \message{\linenumber No `\safefloattype' floats to list.}% + \fi + \else + \begingroup + \leftskip=\tocindent % indent these entries like a toc + \let\do=\listoffloatsdo + \csname floatlist\safefloattype\endcsname + \endgroup + \fi +} + +% This is called on each entry in a list of floats. We're passed the +% xref label, in the form LABEL-title, which is how we save it in the +% aux file. We strip off the -title and look up \XRLABEL-lof, which +% has the text we're supposed to typeset here. +% +% Figures without xref labels will not be included in the list (since +% they won't appear in the aux file). +% +\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} +\def\listoffloatsdoentry#1-title\finish{{% + % Can't fully expand XR#1-lof because it can contain anything. Just + % pass the control sequence. On the other hand, XR#1-pg is just the + % page number, and we want to fully expand that so we can get a link + % in pdf output. + \toksA = \expandafter{\csname XR#1-lof\endcsname}% + % + % use the same \entry macro we use to generate the TOC and index. + \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}% + \writeentry +}} + \message{localization,} % and i18n. @@ -6380,19 +6817,17 @@ width0pt\relax} \fi % properly. Single argument is the language abbreviation. % It would be nice if we could set up a hyphenation file here. % -\def\documentlanguage{\parsearg\dodocumentlanguage} -\def\dodocumentlanguage#1{% +\parseargdef\documentlanguage{% \tex % read txi-??.tex file in plain TeX. - % Read the file if it exists. - \openin 1 txi-#1.tex - \ifeof1 - \errhelp = \nolanghelp - \errmessage{Cannot read language file txi-#1.tex}% - \let\temp = \relax - \else - \def\temp{\input txi-#1.tex }% - \fi - \temp + % Read the file if it exists. + \openin 1 txi-#1.tex + \ifeof 1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \else + \input txi-#1.tex + \fi + \closein 1 \endgroup } \newhelp\nolanghelp{The given language definition file cannot be found or @@ -6437,9 +6872,9 @@ should work if nowhere else does.} \fi } -% Parameters in order: 1) textheight; 2) textwidth; 3) voffset; -% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8) -% physical page width. +% Parameters in order: 1) textheight; 2) textwidth; +% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip; +% 7) physical page height; 8) physical page width. % % We also call \setleading{\textleading}, so the caller should define % \textleading. The caller should also set \parskip. @@ -6486,7 +6921,7 @@ should work if nowhere else does.} {11in}{8.5in}% }} -% Use @smallbook to reset parameters for 7x9.5 (or so) format. +% Use @smallbook to reset parameters for 7x9.25 trim size. \def\smallbook{{\globaldefs = 1 \parskip = 2pt plus 1pt \textleading = 12pt @@ -6503,6 +6938,24 @@ should work if nowhere else does.} \defbodyindent = .5cm }} +% Use @smallerbook to reset parameters for 6x9 trim size. +% (Just testing, parameters still in flux.) +\def\smallerbook{{\globaldefs = 1 + \parskip = 1.5pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.4in}{4.8in}% + {-.2in}{-.4in}% + {0pt}{14pt}% + {9in}{6in}% + % + \lispnarrowing = 0.25in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .4cm +}} + % Use @afourpaper to print on European A4 paper. \def\afourpaper{{\globaldefs = 1 \parskip = 3pt plus 2pt minus 1pt @@ -6575,8 +7028,7 @@ should work if nowhere else does.} % Perhaps we should allow setting the margins, \topskip, \parskip, % and/or leading, also. Or perhaps we should compute them somehow. % -\def\pagesizes{\parsearg\pagesizesxxx} -\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish} +\parseargdef\pagesizes{\pagesizesyyy #1,,\finish} \def\pagesizesyyy#1,#2,#3\finish{{% \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi \globaldefs = 1 @@ -6623,8 +7075,8 @@ should work if nowhere else does.} \def\normalplus{+} \def\normaldollar{$}%$ font-lock fix -% This macro is used to make a character print one way in ttfont -% where it can probably just be output, and another way in other fonts, +% This macro is used to make a character print one way in \tt +% (where it can probably be output as-is), and another way in other fonts, % where something hairier probably needs to be done. % % #1 is what to print if we are indeed using \tt; #2 is what to print @@ -6656,6 +7108,7 @@ should work if nowhere else does.} \catcode`\_=\active \def_{\ifusingtt\normalunderscore\_} +\let\realunder=_ % Subroutine for the previous macro. \def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } @@ -6672,46 +7125,49 @@ should work if nowhere else does.} \catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix -% Set up an active definition for =, but don't enable it most of the time. -{\catcode`\==\active -\global\def={{\tt \char 61}}} - -\catcode`+=\active -\catcode`\_=\active - % If a .fmt file is being used, characters that might appear in a file % name cannot be active until we have parsed the command line. % So turn them off again, and have \everyjob (or @setfilename) turn them on. % \otherifyactive is called near the end of this file. \def\otherifyactive{\catcode`+=\other \catcode`\_=\other} +% Used sometimes to turn off (effectively) the active characters even after +% parsing them. +\def\turnoffactive{% + \normalturnoffactive + \otherbackslash +} + \catcode`\@=0 -% \rawbackslashxx outputs one backslash character in current font, +% \backslashcurfont outputs one backslash character in current font, % as in \char`\\. -\global\chardef\rawbackslashxx=`\\ - -% \rawbackslash defines an active \ to do \rawbackslashxx. -% \otherbackslash defines an active \ to be a literal `\' character with -% catcode other. -{\catcode`\\=\active - @gdef@rawbackslash{@let\=@rawbackslashxx} - @gdef@otherbackslash{@let\=@realbackslash} -} +\global\chardef\backslashcurfont=`\\ +\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work -% \realbackslash is an actual character `\' with catcode other. -{\catcode`\\=\other @gdef@realbackslash{\}} - -% \normalbackslash outputs one backslash in fixed width font. -\def\normalbackslash{{\tt\rawbackslashxx}} +% \realbackslash is an actual character `\' with catcode other, and +% \doublebackslash is two of them (for the pdf outlines). +{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} +% In texinfo, backslash is an active character; it prints the backslash +% in fixed width font. \catcode`\\=\active +@def@normalbackslash{{@tt@backslashcurfont}} +% On startup, @fixbackslash assigns: +% @let \ = @normalbackslash + +% \rawbackslash defines an active \ to do \backslashcurfont. +% \otherbackslash defines an active \ to be a literal `\' character with +% catcode other. +@gdef@rawbackslash{@let\=@backslashcurfont} +@gdef@otherbackslash{@let\=@realbackslash} -% Used sometimes to turn off (effectively) the active characters -% even after parsing them. -@def@turnoffactive{% +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. +% +@def@normalturnoffactive{% + @let\=@normalbackslash @let"=@normaldoublequote - @let\=@realbackslash @let~=@normaltilde @let^=@normalcaret @let_=@normalunderscore @@ -6720,14 +7176,9 @@ should work if nowhere else does.} @let>=@normalgreater @let+=@normalplus @let$=@normaldollar %$ font-lock fix + @unsepspaces } -% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of -% the literal character `\'. (Thus, \ is not expandable when this is in -% effect.) -% -@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash} - % Make _ and + \other characters, temporarily. % This is canceled by @fixbackslash. @otherifyactive @@ -6740,9 +7191,9 @@ should work if nowhere else does.} @global@let\ = @eatinput % On the other hand, perhaps the file did not have a `\input texinfo'. Then -% the first `\{ in the file would cause an error. This macro tries to fix +% the first `\' in the file would cause an error. This macro tries to fix % that, assuming it is called before the first `\' could plausibly occur. -% Also back turn on active characters that might appear in the input +% Also turn back on active characters that might appear in the input % file name, in case not using a pre-dumped format. % @gdef@fixbackslash{% @@ -6759,10 +7210,6 @@ should work if nowhere else does.} @catcode`@# = @other @catcode`@% = @other -@c Set initial fonts. -@textfonts -@rm - @c Local variables: @c eval: (add-hook 'write-file-hooks 'time-stamp) @@ -6772,6 +7219,8 @@ should work if nowhere else does.} @c time-stamp-end: "}" @c End: +@c vim:sw=2: + @ignore - arch-tag: 53261dd3-7df7-4ec3-9d90-af7a955d3c87 + arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 @end ignore -- cgit v1.2.1