/*************************************************************************** * _ _ ____ _ * Project ___| | | | _ \| | * / __| | | | |_) | | * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * * Copyright (C) 1998 - 2021, Daniel Stenberg, , et al. * * This software is licensed as described in the file COPYING, which * you should have received as part of this distribution. The terms * are also available at https://curl.se/docs/copyright.html. * * You may opt to use, copy, modify, merge, publish, distribute and/or sell * copies of the Software, and permit persons to whom the Software is * furnished to do so, under the terms of the COPYING file. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ***************************************************************************/ #include "tool_setup.h" #ifdef HAVE_FCNTL_H # include #endif #ifdef HAVE_LOCALE_H # include #endif #ifdef HAVE_SYS_SELECT_H # include #elif defined(HAVE_UNISTD_H) # include #endif #ifdef __VMS # include #endif #ifdef __AMIGA__ # include #endif #include "strcase.h" #define ENABLE_CURLX_PRINTF /* use our own printf() functions */ #include "curlx.h" #include "tool_binmode.h" #include "tool_cfgable.h" #include "tool_cb_dbg.h" #include "tool_cb_hdr.h" #include "tool_cb_prg.h" #include "tool_cb_rea.h" #include "tool_cb_see.h" #include "tool_cb_wrt.h" #include "tool_dirhie.h" #include "tool_doswin.h" #include "tool_easysrc.h" #include "tool_filetime.h" #include "tool_getparam.h" #include "tool_helpers.h" #include "tool_homedir.h" #include "tool_libinfo.h" #include "tool_main.h" #include "tool_metalink.h" #include "tool_msgs.h" #include "tool_operate.h" #include "tool_operhlp.h" #include "tool_paramhlp.h" #include "tool_parsecfg.h" #include "tool_setopt.h" #include "tool_sleep.h" #include "tool_urlglob.h" #include "tool_util.h" #include "tool_writeout.h" #include "tool_xattr.h" #include "tool_vms.h" #include "tool_help.h" #include "tool_hugehelp.h" #include "tool_progress.h" #include "memdebug.h" /* keep this as LAST include */ #ifdef CURLDEBUG /* libcurl's debug builds provide an extra function */ CURLcode curl_easy_perform_ev(CURL *easy); #endif #define CURLseparator "--_curl_--" #ifndef O_BINARY /* since O_BINARY as used in bitmasks, setting it to zero makes it usable in source code but yet it doesn't ruin anything */ # define O_BINARY 0 #endif #define CURL_CA_CERT_ERRORMSG \ "More details here: https://curl.se/docs/sslcerts.html\n\n" \ "curl failed to verify the legitimacy of the server and therefore " \ "could not\nestablish a secure connection to it. To learn more about " \ "this situation and\nhow to fix it, please visit the web page mentioned " \ "above.\n" static CURLcode single_transfer(struct GlobalConfig *global, struct OperationConfig *config, CURLSH *share, bool capath_from_env, bool *added); static CURLcode create_transfer(struct GlobalConfig *global, CURLSH *share, bool *added); static bool is_fatal_error(CURLcode code) { switch(code) { case CURLE_FAILED_INIT: case CURLE_OUT_OF_MEMORY: case CURLE_UNKNOWN_OPTION: case CURLE_FUNCTION_NOT_FOUND: case CURLE_BAD_FUNCTION_ARGUMENT: /* critical error */ return TRUE; default: break; } /* no error or not critical */ return FALSE; } /* * Check if a given string is a PKCS#11 URI */ static bool is_pkcs11_uri(const char *string) { if(curl_strnequal(string, "pkcs11:", 7)) { return TRUE; } else { return FALSE; } } #ifdef __VMS /* * get_vms_file_size does what it takes to get the real size of the file * * For fixed files, find out the size of the EOF block and adjust. * * For all others, have to read the entire file in, discarding the contents. * Most posted text files will be small, and binary files like zlib archives * and CD/DVD images should be either a STREAM_LF format or a fixed format. * */ static curl_off_t vms_realfilesize(const char *name, const struct_stat *stat_buf) { char buffer[8192]; curl_off_t count; int ret_stat; FILE * file; /* !checksrc! disable FOPENMODE 1 */ file = fopen(name, "r"); /* VMS */ if(file == NULL) { return 0; } count = 0; ret_stat = 1; while(ret_stat > 0) { ret_stat = fread(buffer, 1, sizeof(buffer), file); if(ret_stat != 0) count += ret_stat; } fclose(file); return count; } /* * * VmsSpecialSize checks to see if the stat st_size can be trusted and * if not to call a routine to get the correct size. * */ static curl_off_t VmsSpecialSize(const char *name, const struct_stat *stat_buf) { switch(stat_buf->st_fab_rfm) { case FAB$C_VAR: case FAB$C_VFC: return vms_realfilesize(name, stat_buf); break; default: return stat_buf->st_size; } } #endif /* __VMS */ #define BUFFER_SIZE (100*1024) struct per_transfer *transfers; /* first node */ static struct per_transfer *transfersl; /* last node */ /* add_per_transfer creates a new 'per_transfer' node in the linked list of transfers */ static CURLcode add_per_transfer(struct per_transfer **per) { struct per_transfer *p; p = calloc(sizeof(struct per_transfer), 1); if(!p) return CURLE_OUT_OF_MEMORY; if(!transfers) /* first entry */ transfersl = transfers = p; else { /* make the last node point to the new node */ transfersl->next = p; /* make the new node point back to the formerly last node */ p->prev = transfersl; /* move the last node pointer to the new entry */ transfersl = p; } *per = p; all_xfers++; /* count total number of transfers added */ return CURLE_OK; } /* Remove the specified transfer from the list (and free it), return the next in line */ static struct per_transfer *del_per_transfer(struct per_transfer *per) { struct per_transfer *n; struct per_transfer *p; DEBUGASSERT(transfers); DEBUGASSERT(transfersl); DEBUGASSERT(per); n = per->next; p = per->prev; if(p) p->next = n; else transfers = n; if(n) n->prev = p; else transfersl = p; free(per); return n; } static CURLcode pre_transfer(struct GlobalConfig *global, struct per_transfer *per) { curl_off_t uploadfilesize = -1; struct_stat fileinfo; CURLcode result = CURLE_OK; if(per->separator_err) fprintf(global->errors, "%s\n", per->separator_err); if(per->separator) printf("%s\n", per->separator); if(per->uploadfile && !stdin_upload(per->uploadfile)) { /* VMS Note: * * Reading binary from files can be a problem... Only FIXED, VAR * etc WITHOUT implied CC will work Others need a \n appended to a * line * * - Stat gives a size but this is UNRELIABLE in VMS As a f.e. a * fixed file with implied CC needs to have a byte added for every * record processed, this can by derived from Filesize & recordsize * for VARiable record files the records need to be counted! for * every record add 1 for linefeed and subtract 2 for the record * header for VARIABLE header files only the bare record data needs * to be considered with one appended if implied CC */ #ifdef __VMS /* Calculate the real upload size for VMS */ per->infd = -1; if(stat(per->uploadfile, &fileinfo) == 0) { fileinfo.st_size = VmsSpecialSize(uploadfile, &fileinfo); switch(fileinfo.st_fab_rfm) { case FAB$C_VAR: case FAB$C_VFC: case FAB$C_STMCR: per->infd = open(per->uploadfile, O_RDONLY | O_BINARY); break; default: per->infd = open(per->uploadfile, O_RDONLY | O_BINARY, "rfm=stmlf", "ctx=stm"); } } if(per->infd == -1) #else per->infd = open(per->uploadfile, O_RDONLY | O_BINARY); if((per->infd == -1) || fstat(per->infd, &fileinfo)) #endif { helpf(global->errors, "Can't open '%s'!\n", per->uploadfile); if(per->infd != -1) { close(per->infd); per->infd = STDIN_FILENO; } return CURLE_READ_ERROR; } per->infdopen = TRUE; /* we ignore file size for char/block devices, sockets, etc. */ if(S_ISREG(fileinfo.st_mode)) uploadfilesize = fileinfo.st_size; if(uploadfilesize != -1) { struct OperationConfig *config = per->config; /* for the macro below */ #ifdef CURL_DISABLE_LIBCURL_OPTION (void)config; #endif my_setopt(per->curl, CURLOPT_INFILESIZE_LARGE, uploadfilesize); } per->input.fd = per->infd; } return result; } /* * Call this after a transfer has completed. */ static CURLcode post_per_transfer(struct GlobalConfig *global, struct per_transfer *per, CURLcode result, bool *retryp, long *delay) /* milliseconds! */ { struct OutStruct *outs = &per->outs; CURL *curl = per->curl; struct OperationConfig *config = per->config; if(!curl || !config) return result; *retryp = FALSE; *delay = 0; /* for no retry, keep it zero */ if(per->infdopen) close(per->infd); #ifdef __VMS if(is_vms_shell()) { /* VMS DCL shell behavior */ if(!global->showerror) vms_show = VMSSTS_HIDE; } else #endif if(!config->synthetic_error && result && global->showerror) { fprintf(global->errors, "curl: (%d) %s\n", result, (per->errorbuffer[0]) ? per->errorbuffer : curl_easy_strerror(result)); if(result == CURLE_PEER_FAILED_VERIFICATION) fputs(CURL_CA_CERT_ERRORMSG, global->errors); } /* Set file extended attributes */ if(!result && config->xattr && outs->fopened && outs->stream) { int rc = fwrite_xattr(curl, fileno(outs->stream)); if(rc) warnf(config->global, "Error setting extended attributes: %s\n", strerror(errno)); } if(!result && !outs->stream && !outs->bytes) { /* we have received no data despite the transfer was successful ==> force cration of an empty output file (if an output file was specified) */ long cond_unmet = 0L; /* do not create (or even overwrite) the file in case we get no data because of unmet condition */ curl_easy_getinfo(curl, CURLINFO_CONDITION_UNMET, &cond_unmet); if(!cond_unmet && !tool_create_output_file(outs, config)) result = CURLE_WRITE_ERROR; } if(!outs->s_isreg && outs->stream) { /* Dump standard stream buffered data */ int rc = fflush(outs->stream); if(!result && rc) { /* something went wrong in the writing process */ result = CURLE_WRITE_ERROR; if(global->showerror) fprintf(global->errors, "curl: (%d) Failed writing body\n", result); } } #ifdef USE_METALINK if(per->metalink && !per->metalink_next_res) fprintf(global->errors, "Metalink: fetching (%s) from (%s) OK\n", per->mlfile->filename, per->this_url); if(!per->metalink && config->use_metalink && result == CURLE_OK) { int rv = parse_metalink(config, outs, per->this_url); if(!rv) { fprintf(config->global->errors, "Metalink: parsing (%s) OK\n", per->this_url); } else if(rv == -1) fprintf(config->global->errors, "Metalink: parsing (%s) FAILED\n", per->this_url); } else if(per->metalink && result == CURLE_OK && !per->metalink_next_res) { int rv; (void)fflush(outs->stream); rv = metalink_check_hash(global, per->mlfile, outs->filename); if(!rv) per->metalink_next_res = 1; } #endif /* USE_METALINK */ #ifdef USE_METALINK if(outs->metalink_parser) metalink_parser_context_delete(outs->metalink_parser); #endif /* USE_METALINK */ /* if retry-max-time is non-zero, make sure we haven't exceeded the time */ if(per->retry_numretries && (!config->retry_maxtime || (tvdiff(tvnow(), per->retrystart) < config->retry_maxtime*1000L)) ) { enum { RETRY_NO, RETRY_ALL_ERRORS, RETRY_TIMEOUT, RETRY_CONNREFUSED, RETRY_HTTP, RETRY_FTP, RETRY_LAST /* not used */ } retry = RETRY_NO; long response = 0; if((CURLE_OPERATION_TIMEDOUT == result) || (CURLE_COULDNT_RESOLVE_HOST == result) || (CURLE_COULDNT_RESOLVE_PROXY == result) || (CURLE_FTP_ACCEPT_TIMEOUT == result)) /* retry timeout always */ retry = RETRY_TIMEOUT; else if(config->retry_connrefused && (CURLE_COULDNT_CONNECT == result)) { long oserrno = 0; curl_easy_getinfo(curl, CURLINFO_OS_ERRNO, &oserrno); if(ECONNREFUSED == oserrno) retry = RETRY_CONNREFUSED; } else if((CURLE_OK == result) || (config->failonerror && (CURLE_HTTP_RETURNED_ERROR == result))) { /* If it returned OK. _or_ failonerror was enabled and it returned due to such an error, check for HTTP transient errors to retry on. */ long protocol = 0; curl_easy_getinfo(curl, CURLINFO_PROTOCOL, &protocol); if((protocol == CURLPROTO_HTTP) || (protocol == CURLPROTO_HTTPS)) { /* This was HTTP(S) */ curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response); switch(response) { case 408: /* Request Timeout */ case 429: /* Too Many Requests (RFC6585) */ case 500: /* Internal Server Error */ case 502: /* Bad Gateway */ case 503: /* Service Unavailable */ case 504: /* Gateway Timeout */ retry = RETRY_HTTP; /* * At this point, we have already written data to the output * file (or terminal). If we write to a file, we must rewind * or close/re-open the file so that the next attempt starts * over from the beginning. * * TODO: similar action for the upload case. We might need * to start over reading from a previous point if we have * uploaded something when this was returned. */ break; } } } /* if CURLE_OK */ else if(result) { long protocol = 0; curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response); curl_easy_getinfo(curl, CURLINFO_PROTOCOL, &protocol); if((protocol == CURLPROTO_FTP || protocol == CURLPROTO_FTPS) && response / 100 == 4) /* * This is typically when the FTP server only allows a certain * amount of users and we are not one of them. All 4xx codes * are transient. */ retry = RETRY_FTP; } if(result && !retry && config->retry_all_errors) retry = RETRY_ALL_ERRORS; if(retry) { long sleeptime = 0; curl_off_t retry_after = 0; static const char * const m[]={ NULL, "(retrying all errors)", ": timeout", ": connection refused", ": HTTP error", ": FTP error" }; sleeptime = per->retry_sleep; if(RETRY_HTTP == retry) { curl_easy_getinfo(curl, CURLINFO_RETRY_AFTER, &retry_after); if(retry_after) { /* store in a 'long', make sure it doesn't overflow */ if(retry_after > LONG_MAX/1000) sleeptime = LONG_MAX; else sleeptime = (long)retry_after * 1000; /* milliseconds */ } } warnf(config->global, "Problem %s. " "Will retry in %ld seconds. " "%ld retries left.\n", m[retry], sleeptime/1000L, per->retry_numretries); per->retry_numretries--; if(!config->retry_delay) { per->retry_sleep *= 2; if(per->retry_sleep > RETRY_SLEEP_MAX) per->retry_sleep = RETRY_SLEEP_MAX; } if(outs->bytes && outs->filename && outs->stream) { int rc; /* We have written data to a output file, we truncate file */ if(!global->mute) fprintf(global->errors, "Throwing away %" CURL_FORMAT_CURL_OFF_T " bytes\n", outs->bytes); fflush(outs->stream); /* truncate file at the position where we started appending */ #ifdef HAVE_FTRUNCATE if(ftruncate(fileno(outs->stream), outs->init)) { /* when truncate fails, we can't just append as then we'll create something strange, bail out */ if(global->showerror) fprintf(global->errors, "curl: (23) Failed to truncate file\n"); return CURLE_WRITE_ERROR; } /* now seek to the end of the file, the position where we just truncated the file in a large file-safe way */ rc = fseek(outs->stream, 0, SEEK_END); #else /* ftruncate is not available, so just reposition the file to the location we would have truncated it. This won't work properly with large files on 32-bit systems, but most of those will have ftruncate. */ rc = fseek(outs->stream, (long)outs->init, SEEK_SET); #endif if(rc) { if(global->showerror) fprintf(global->errors, "curl: (23) Failed seeking to end of file\n"); return CURLE_WRITE_ERROR; } outs->bytes = 0; /* clear for next round */ } *retryp = TRUE; *delay = sleeptime; return CURLE_OK; } } /* if retry_numretries */ else if(per->metalink) { /* Metalink: Decide to try the next resource or not. Try the next resource if download was not successful. */ long response = 0; if(CURLE_OK == result) { /* TODO We want to try next resource when download was not successful. How to know that? */ char *effective_url = NULL; curl_easy_getinfo(curl, CURLINFO_EFFECTIVE_URL, &effective_url); if(effective_url && curl_strnequal(effective_url, "http", 4)) { /* This was HTTP(S) */ curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response); if(response != 200 && response != 206) { per->metalink_next_res = 1; fprintf(global->errors, "Metalink: fetching (%s) from (%s) FAILED " "(HTTP status code %ld)\n", per->mlfile->filename, per->this_url, response); } } } else { per->metalink_next_res = 1; fprintf(global->errors, "Metalink: fetching (%s) from (%s) FAILED (%s)\n", per->mlfile->filename, per->this_url, curl_easy_strerror(result)); } } if((global->progressmode == CURL_PROGRESS_BAR) && per->progressbar.calls) /* if the custom progress bar has been displayed, we output a newline here */ fputs("\n", per->progressbar.out); if(config->writeout) ourWriteOut(per->curl, per, config->writeout, result); /* Close the outs file */ if(outs->fopened && outs->stream) { int rc = fclose(outs->stream); if(!result && rc) { /* something went wrong in the writing process */ result = CURLE_WRITE_ERROR; if(global->showerror) fprintf(global->errors, "curl: (%d) Failed writing body\n", result); } } /* File time can only be set _after_ the file has been closed */ if(!result && config->remote_time && outs->s_isreg && outs->filename) { /* Ask libcurl if we got a remote file time */ curl_off_t filetime = -1; curl_easy_getinfo(curl, CURLINFO_FILETIME_T, &filetime); setfiletime(filetime, outs->filename, config->global->errors); } /* Close function-local opened file descriptors */ if(per->heads.fopened && per->heads.stream) fclose(per->heads.stream); if(per->heads.alloc_filename) Curl_safefree(per->heads.filename); if(per->etag_save.fopened && per->etag_save.stream) fclose(per->etag_save.stream); if(per->etag_save.alloc_filename) Curl_safefree(per->etag_save.filename); curl_easy_cleanup(per->curl); if(outs->alloc_filename) free(outs->filename); free(per->this_url); free(per->separator_err); free(per->separator); free(per->outfile); free(per->uploadfile); return CURLE_OK; } static void single_transfer_cleanup(struct OperationConfig *config) { if(config) { struct State *state = &config->state; if(state->urls) { /* Free list of remaining URLs */ glob_cleanup(state->urls); state->urls = NULL; } Curl_safefree(state->outfiles); Curl_safefree(state->httpgetfields); Curl_safefree(state->uploadfile); if(state->inglob) { /* Free list of globbed upload files */ glob_cleanup(state->inglob); state->inglob = NULL; } } } /* create the next (singular) transfer */ static CURLcode single_transfer(struct GlobalConfig *global, struct OperationConfig *config, CURLSH *share, bool capath_from_env, bool *added) { CURLcode result = CURLE_OK; struct getout *urlnode; struct metalinkfile *mlfile_last = NULL; bool orig_noprogress = global->noprogress; bool orig_isatty = global->isatty; struct State *state = &config->state; char *httpgetfields = state->httpgetfields; *added = FALSE; /* not yet */ if(config->postfields) { if(config->use_httpget) { if(!httpgetfields) { /* Use the postfields data for a http get */ httpgetfields = state->httpgetfields = strdup(config->postfields); Curl_safefree(config->postfields); if(!httpgetfields) { errorf(global, "out of memory\n"); result = CURLE_OUT_OF_MEMORY; } else if(SetHTTPrequest(config, (config->no_body?HTTPREQ_HEAD:HTTPREQ_GET), &config->httpreq)) { result = CURLE_FAILED_INIT; } } } else { if(SetHTTPrequest(config, HTTPREQ_SIMPLEPOST, &config->httpreq)) result = CURLE_FAILED_INIT; } if(result) { single_transfer_cleanup(config); return result; } } if(!state->urlnode) { /* first time caller, setup things */ state->urlnode = config->url_list; state->infilenum = 1; } while(config->state.urlnode) { char *infiles; /* might be a glob pattern */ struct URLGlob *inglob = state->inglob; bool metalink = FALSE; /* metalink download? */ struct metalinkfile *mlfile; struct metalink_resource *mlres; urlnode = config->state.urlnode; if(urlnode->flags & GETOUT_METALINK) { metalink = 1; if(mlfile_last == NULL) { mlfile_last = config->metalinkfile_list; } mlfile = mlfile_last; mlfile_last = mlfile_last->next; mlres = mlfile->resource; } else { mlfile = NULL; mlres = NULL; } /* urlnode->url is the full URL (it might be NULL) */ if(!urlnode->url) { /* This node has no URL. Free node data without destroying the node itself nor modifying next pointer and continue to next */ Curl_safefree(urlnode->outfile); Curl_safefree(urlnode->infile); urlnode->flags = 0; config->state.urlnode = urlnode->next; state->up = 0; continue; /* next URL please */ } /* save outfile pattern before expansion */ if(urlnode->outfile && !state->outfiles) { state->outfiles = strdup(urlnode->outfile); if(!state->outfiles) { errorf(global, "out of memory\n"); result = CURLE_OUT_OF_MEMORY; break; } } infiles = urlnode->infile; if(!config->globoff && infiles && !inglob) { /* Unless explicitly shut off */ result = glob_url(&inglob, infiles, &state->infilenum, global->showerror?global->errors:NULL); if(result) break; config->state.inglob = inglob; } { int separator; unsigned long urlnum; if(!state->up && !infiles) Curl_nop_stmt; else { if(!state->uploadfile) { if(inglob) { result = glob_next_url(&state->uploadfile, inglob); if(result == CURLE_OUT_OF_MEMORY) errorf(global, "out of memory\n"); } else if(!state->up) { state->uploadfile = strdup(infiles); if(!state->uploadfile) { errorf(global, "out of memory\n"); result = CURLE_OUT_OF_MEMORY; } } } if(result) break; } if(!state->urlnum) { if(metalink) { /* For Metalink download, we don't use glob. Instead we use the number of resources as urlnum. */ urlnum = count_next_metalink_resource(mlfile); } else if(!config->globoff) { /* Unless explicitly shut off, we expand '{...}' and '[...]' expressions and return total number of URLs in pattern set */ result = glob_url(&state->urls, urlnode->url, &state->urlnum, global->showerror?global->errors:NULL); if(result) break; urlnum = state->urlnum; } else urlnum = 1; /* without globbing, this is a single URL */ } else urlnum = state->urlnum; /* if multiple files extracted to stdout, insert separators! */ separator = ((!state->outfiles || !strcmp(state->outfiles, "-")) && urlnum > 1); if(state->up < state->infilenum) { struct per_transfer *per; struct OutStruct *outs; struct InStruct *input; struct OutStruct *heads; struct OutStruct *etag_save; struct HdrCbData *hdrcbdata = NULL; CURL *curl = curl_easy_init(); result = add_per_transfer(&per); if(result || !curl) { curl_easy_cleanup(curl); result = CURLE_OUT_OF_MEMORY; break; } if(state->uploadfile) { per->uploadfile = strdup(state->uploadfile); if(!per->uploadfile) { curl_easy_cleanup(curl); result = CURLE_OUT_OF_MEMORY; break; } } *added = TRUE; per->config = config; per->curl = curl; per->urlnum = urlnode->num; /* default headers output stream is stdout */ heads = &per->heads; heads->stream = stdout; /* Single header file for all URLs */ if(config->headerfile) { /* open file for output: */ if(strcmp(config->headerfile, "-")) { FILE *newfile; newfile = fopen(config->headerfile, per->prev == NULL?"wb":"ab"); if(!newfile) { warnf(config->global, "Failed to open %s\n", config->headerfile); result = CURLE_WRITE_ERROR; break; } else { heads->filename = config->headerfile; heads->s_isreg = TRUE; heads->fopened = TRUE; heads->stream = newfile; } } else { /* always use binary mode for protocol header output */ set_binmode(heads->stream); } } hdrcbdata = &per->hdrcbdata; outs = &per->outs; input = &per->input; per->outfile = NULL; per->infdopen = FALSE; per->infd = STDIN_FILENO; /* default output stream is stdout */ outs->stream = stdout; /* --etag-compare */ if(config->etag_compare_file) { char *etag_from_file = NULL; char *header = NULL; /* open file for reading: */ FILE *file = fopen(config->etag_compare_file, FOPEN_READTEXT); if(!file && !config->etag_save_file) { errorf(config->global, "Failed to open %s\n", config->etag_compare_file); result = CURLE_READ_ERROR; break; } if((PARAM_OK == file2string(&etag_from_file, file)) && etag_from_file) { header = aprintf("If-None-Match: %s", etag_from_file); Curl_safefree(etag_from_file); } else header = aprintf("If-None-Match: \"\""); if(!header) { if(file) fclose(file); errorf(config->global, "Failed to allocate memory for custom etag header\n"); result = CURLE_OUT_OF_MEMORY; break; } /* add Etag from file to list of custom headers */ add2list(&config->headers, header); Curl_safefree(header); if(file) { fclose(file); } } /* --etag-save */ etag_save = &per->etag_save; etag_save->stream = stdout; if(config->etag_save_file) { /* open file for output: */ if(strcmp(config->etag_save_file, "-")) { FILE *newfile = fopen(config->etag_save_file, "wb"); if(!newfile) { warnf( config->global, "Failed to open %s\n", config->etag_save_file); result = CURLE_WRITE_ERROR; break; } else { etag_save->filename = config->etag_save_file; etag_save->s_isreg = TRUE; etag_save->fopened = TRUE; etag_save->stream = newfile; } } else { /* always use binary mode for protocol header output */ set_binmode(etag_save->stream); } } if(metalink) { /* For Metalink download, use name in Metalink file as filename. */ per->outfile = strdup(mlfile->filename); if(!per->outfile) { result = CURLE_OUT_OF_MEMORY; break; } per->this_url = strdup(mlres->url); if(!per->this_url) { result = CURLE_OUT_OF_MEMORY; break; } per->mlfile = mlfile; } else { if(state->urls) { result = glob_next_url(&per->this_url, state->urls); if(result) break; } else if(!state->li) { per->this_url = strdup(urlnode->url); if(!per->this_url) { result = CURLE_OUT_OF_MEMORY; break; } } else per->this_url = NULL; if(!per->this_url) break; if(state->outfiles) { per->outfile = strdup(state->outfiles); if(!per->outfile) { result = CURLE_OUT_OF_MEMORY; break; } } } if(((urlnode->flags&GETOUT_USEREMOTE) || (per->outfile && strcmp("-", per->outfile))) && (metalink || !config->use_metalink)) { /* * We have specified a file name to store the result in, or we have * decided we want to use the remote file name. */ if(!per->outfile) { /* extract the file name from the URL */ result = get_url_file_name(&per->outfile, per->this_url); if(result) break; if(!*per->outfile && !config->content_disposition) { errorf(global, "Remote file name has no length!\n"); result = CURLE_WRITE_ERROR; break; } } else if(state->urls) { /* fill '#1' ... '#9' terms from URL pattern */ char *storefile = per->outfile; result = glob_match_url(&per->outfile, storefile, state->urls); Curl_safefree(storefile); if(result) { /* bad globbing */ warnf(config->global, "bad output glob!\n"); break; } } if(config->output_dir) { char *d = aprintf("%s/%s", config->output_dir, per->outfile); if(!d) { result = CURLE_WRITE_ERROR; break; } free(per->outfile); per->outfile = d; } /* Create the directory hierarchy, if not pre-existent to a multiple file output call */ if(config->create_dirs || metalink) { result = create_dir_hierarchy(per->outfile, global->errors); /* create_dir_hierarchy shows error upon CURLE_WRITE_ERROR */ if(result) break; } if((urlnode->flags & GETOUT_USEREMOTE) && config->content_disposition) { /* Our header callback MIGHT set the filename */ DEBUGASSERT(!outs->filename); } if(config->resume_from_current) { /* We're told to continue from where we are now. Get the size of the file as it is now and open it for append instead */ struct_stat fileinfo; /* VMS -- Danger, the filesize is only valid for stream files */ if(0 == stat(per->outfile, &fileinfo)) /* set offset to current file size: */ config->resume_from = fileinfo.st_size; else /* let offset be 0 */ config->resume_from = 0; } if(config->resume_from) { #ifdef __VMS /* open file for output, forcing VMS output format into stream mode which is needed for stat() call above to always work. */ FILE *file = fopen(outfile, "ab", "ctx=stm", "rfm=stmlf", "rat=cr", "mrs=0"); #else /* open file for output: */ FILE *file = fopen(per->outfile, "ab"); #endif if(!file) { errorf(global, "Can't open '%s'!\n", per->outfile); result = CURLE_WRITE_ERROR; break; } outs->fopened = TRUE; outs->stream = file; outs->init = config->resume_from; } else { outs->stream = NULL; /* open when needed */ } outs->filename = per->outfile; outs->s_isreg = TRUE; } if(per->uploadfile && !stdin_upload(per->uploadfile)) { /* * We have specified a file to upload and it isn't "-". */ char *nurl = add_file_name_to_url(per->this_url, per->uploadfile); if(!nurl) { result = CURLE_OUT_OF_MEMORY; break; } per->this_url = nurl; } else if(per->uploadfile && stdin_upload(per->uploadfile)) { /* count to see if there are more than one auth bit set in the authtype field */ int authbits = 0; int bitcheck = 0; while(bitcheck < 32) { if(config->authtype & (1UL << bitcheck++)) { authbits++; if(authbits > 1) { /* more than one, we're done! */ break; } } } /* * If the user has also selected --anyauth or --proxy-anyauth * we should warn him/her. */ if(config->proxyanyauth || (authbits>1)) { warnf(config->global, "Using --anyauth or --proxy-anyauth with upload from stdin" " involves a big risk of it not working. Use a temporary" " file or a fixed auth type instead!\n"); } DEBUGASSERT(per->infdopen == FALSE); DEBUGASSERT(per->infd == STDIN_FILENO); set_binmode(stdin); if(!strcmp(per->uploadfile, ".")) { if(curlx_nonblock((curl_socket_t)per->infd, TRUE) < 0) warnf(config->global, "fcntl failed on fd=%d: %s\n", per->infd, strerror(errno)); } } if(per->uploadfile && config->resume_from_current) config->resume_from = -1; /* -1 will then force get-it-yourself */ if(output_expected(per->this_url, per->uploadfile) && outs->stream && isatty(fileno(outs->stream))) /* we send the output to a tty, therefore we switch off the progress meter */ per->noprogress = global->noprogress = global->isatty = TRUE; else { /* progress meter is per download, so restore config values */ per->noprogress = global->noprogress = orig_noprogress; global->isatty = orig_isatty; } if(urlnum > 1 && !global->mute) { per->separator_err = aprintf("\n[%lu/%lu]: %s --> %s", state->li + 1, urlnum, per->this_url, per->outfile ? per->outfile : ""); if(separator) per->separator = aprintf("%s%s", CURLseparator, per->this_url); } if(httpgetfields) { char *urlbuffer; /* Find out whether the url contains a file name */ const char *pc = strstr(per->this_url, "://"); char sep = '?'; if(pc) pc += 3; else pc = per->this_url; pc = strrchr(pc, '/'); /* check for a slash */ if(pc) { /* there is a slash present in the URL */ if(strchr(pc, '?')) /* Ouch, there's already a question mark in the URL string, we then append the data with an ampersand separator instead! */ sep = '&'; } /* * Then append ? followed by the get fields to the url. */ if(pc) urlbuffer = aprintf("%s%c%s", per->this_url, sep, httpgetfields); else /* Append / before the ? to create a well-formed url if the url contains a hostname only */ urlbuffer = aprintf("%s/?%s", per->this_url, httpgetfields); if(!urlbuffer) { result = CURLE_OUT_OF_MEMORY; break; } Curl_safefree(per->this_url); /* free previous URL */ per->this_url = urlbuffer; /* use our new URL instead! */ } if(!global->errors) global->errors = stderr; if((!per->outfile || !strcmp(per->outfile, "-")) && !config->use_ascii) { /* We get the output to stdout and we have not got the ASCII/text flag, then set stdout to be binary */ set_binmode(stdout); } /* explicitly passed to stdout means okaying binary gunk */ config->terminal_binary_ok = (per->outfile && !strcmp(per->outfile, "-")); /* Avoid having this setopt added to the --libcurl source output. */ result = curl_easy_setopt(curl, CURLOPT_SHARE, share); if(result) break; if(!config->tcp_nodelay) my_setopt(curl, CURLOPT_TCP_NODELAY, 0L); if(config->tcp_fastopen) my_setopt(curl, CURLOPT_TCP_FASTOPEN, 1L); /* where to store */ my_setopt(curl, CURLOPT_WRITEDATA, per); my_setopt(curl, CURLOPT_INTERLEAVEDATA, per); if(metalink || !config->use_metalink) /* what call to write */ my_setopt(curl, CURLOPT_WRITEFUNCTION, tool_write_cb); #ifdef USE_METALINK else /* Set Metalink specific write callback function to parse XML data progressively. */ my_setopt(curl, CURLOPT_WRITEFUNCTION, metalink_write_cb); #endif /* USE_METALINK */ /* for uploads */ input->config = config; /* Note that if CURLOPT_READFUNCTION is fread (the default), then * lib/telnet.c will Curl_poll() on the input file descriptor * rather then calling the READFUNCTION at regular intervals. * The circumstances in which it is preferable to enable this * behavior, by omitting to set the READFUNCTION & READDATA options, * have not been determined. */ my_setopt(curl, CURLOPT_READDATA, input); /* what call to read */ my_setopt(curl, CURLOPT_READFUNCTION, tool_read_cb); /* in 7.18.0, the CURLOPT_SEEKFUNCTION/DATA pair is taking over what CURLOPT_IOCTLFUNCTION/DATA pair previously provided for seeking */ my_setopt(curl, CURLOPT_SEEKDATA, input); my_setopt(curl, CURLOPT_SEEKFUNCTION, tool_seek_cb); if(config->recvpersecond && (config->recvpersecond < BUFFER_SIZE)) /* use a smaller sized buffer for better sleeps */ my_setopt(curl, CURLOPT_BUFFERSIZE, (long)config->recvpersecond); else my_setopt(curl, CURLOPT_BUFFERSIZE, (long)BUFFER_SIZE); my_setopt_str(curl, CURLOPT_URL, per->this_url); my_setopt(curl, CURLOPT_NOPROGRESS, global->noprogress?1L:0L); if(config->no_body) my_setopt(curl, CURLOPT_NOBODY, 1L); if(config->oauth_bearer) my_setopt_str(curl, CURLOPT_XOAUTH2_BEARER, config->oauth_bearer); { my_setopt_str(curl, CURLOPT_PROXY, config->proxy); /* new in libcurl 7.5 */ if(config->proxy) my_setopt_enum(curl, CURLOPT_PROXYTYPE, config->proxyver); my_setopt_str(curl, CURLOPT_PROXYUSERPWD, config->proxyuserpwd); /* new in libcurl 7.3 */ my_setopt(curl, CURLOPT_HTTPPROXYTUNNEL, config->proxytunnel?1L:0L); /* new in libcurl 7.52.0 */ if(config->preproxy) my_setopt_str(curl, CURLOPT_PRE_PROXY, config->preproxy); /* new in libcurl 7.10.6 */ if(config->proxyanyauth) my_setopt_bitmask(curl, CURLOPT_PROXYAUTH, (long)CURLAUTH_ANY); else if(config->proxynegotiate) my_setopt_bitmask(curl, CURLOPT_PROXYAUTH, (long)CURLAUTH_GSSNEGOTIATE); else if(config->proxyntlm) my_setopt_bitmask(curl, CURLOPT_PROXYAUTH, (long)CURLAUTH_NTLM); else if(config->proxydigest) my_setopt_bitmask(curl, CURLOPT_PROXYAUTH, (long)CURLAUTH_DIGEST); else if(config->proxybasic) my_setopt_bitmask(curl, CURLOPT_PROXYAUTH, (long)CURLAUTH_BASIC); /* new in libcurl 7.19.4 */ my_setopt_str(curl, CURLOPT_NOPROXY, config->noproxy); my_setopt(curl, CURLOPT_SUPPRESS_CONNECT_HEADERS, config->suppress_connect_headers?1L:0L); } my_setopt(curl, CURLOPT_FAILONERROR, config->failonerror?1L:0L); my_setopt(curl, CURLOPT_REQUEST_TARGET, config->request_target); my_setopt(curl, CURLOPT_UPLOAD, per->uploadfile?1L:0L); my_setopt(curl, CURLOPT_DIRLISTONLY, config->dirlistonly?1L:0L); my_setopt(curl, CURLOPT_APPEND, config->ftp_append?1L:0L); if(config->netrc_opt) my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_OPTIONAL); else if(config->netrc || config->netrc_file) my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_REQUIRED); else my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_IGNORED); if(config->netrc_file) my_setopt_str(curl, CURLOPT_NETRC_FILE, config->netrc_file); my_setopt(curl, CURLOPT_TRANSFERTEXT, config->use_ascii?1L:0L); if(config->login_options) my_setopt_str(curl, CURLOPT_LOGIN_OPTIONS, config->login_options); my_setopt_str(curl, CURLOPT_USERPWD, config->userpwd); my_setopt_str(curl, CURLOPT_RANGE, config->range); my_setopt(curl, CURLOPT_ERRORBUFFER, per->errorbuffer); my_setopt(curl, CURLOPT_TIMEOUT_MS, (long)(config->timeout * 1000)); switch(config->httpreq) { case HTTPREQ_SIMPLEPOST: my_setopt_str(curl, CURLOPT_POSTFIELDS, config->postfields); my_setopt(curl, CURLOPT_POSTFIELDSIZE_LARGE, config->postfieldsize); break; case HTTPREQ_MIMEPOST: /* free previous remainders */ curl_mime_free(config->mimepost); config->mimepost = NULL; result = tool2curlmime(curl, config->mimeroot, &config->mimepost); if(result) break; my_setopt_mimepost(curl, CURLOPT_MIMEPOST, config->mimepost); break; default: break; } if(result) break; /* new in libcurl 7.10.6 (default is Basic) */ if(config->authtype) my_setopt_bitmask(curl, CURLOPT_HTTPAUTH, (long)config->authtype); my_setopt_slist(curl, CURLOPT_HTTPHEADER, config->headers); if(built_in_protos & (CURLPROTO_HTTP | CURLPROTO_RTSP)) { my_setopt_str(curl, CURLOPT_REFERER, config->referer); my_setopt_str(curl, CURLOPT_USERAGENT, config->useragent); } if(built_in_protos & CURLPROTO_HTTP) { long postRedir = 0; my_setopt(curl, CURLOPT_FOLLOWLOCATION, config->followlocation?1L:0L); my_setopt(curl, CURLOPT_UNRESTRICTED_AUTH, config->unrestricted_auth?1L:0L); my_setopt(curl, CURLOPT_AUTOREFERER, config->autoreferer?1L:0L); /* new in libcurl 7.36.0 */ if(config->proxyheaders) { my_setopt_slist(curl, CURLOPT_PROXYHEADER, config->proxyheaders); my_setopt(curl, CURLOPT_HEADEROPT, CURLHEADER_SEPARATE); } /* new in libcurl 7.5 */ my_setopt(curl, CURLOPT_MAXREDIRS, config->maxredirs); if(config->httpversion) my_setopt_enum(curl, CURLOPT_HTTP_VERSION, config->httpversion); else if(curlinfo->features & CURL_VERSION_HTTP2) { my_setopt_enum(curl, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_2TLS); } /* curl 7.19.1 (the 301 version existed in 7.18.2), 303 was added in 7.26.0 */ if(config->post301) postRedir |= CURL_REDIR_POST_301; if(config->post302) postRedir |= CURL_REDIR_POST_302; if(config->post303) postRedir |= CURL_REDIR_POST_303; my_setopt(curl, CURLOPT_POSTREDIR, postRedir); /* new in libcurl 7.21.6 */ if(config->encoding) my_setopt_str(curl, CURLOPT_ACCEPT_ENCODING, ""); /* new in libcurl 7.21.6 */ if(config->tr_encoding) my_setopt(curl, CURLOPT_TRANSFER_ENCODING, 1L); /* new in libcurl 7.64.0 */ my_setopt(curl, CURLOPT_HTTP09_ALLOWED, config->http09_allowed ? 1L : 0L); } /* (built_in_protos & CURLPROTO_HTTP) */ my_setopt_str(curl, CURLOPT_FTPPORT, config->ftpport); my_setopt(curl, CURLOPT_LOW_SPEED_LIMIT, config->low_speed_limit); my_setopt(curl, CURLOPT_LOW_SPEED_TIME, config->low_speed_time); my_setopt(curl, CURLOPT_MAX_SEND_SPEED_LARGE, config->sendpersecond); my_setopt(curl, CURLOPT_MAX_RECV_SPEED_LARGE, config->recvpersecond); if(config->use_resume) my_setopt(curl, CURLOPT_RESUME_FROM_LARGE, config->resume_from); else my_setopt(curl, CURLOPT_RESUME_FROM_LARGE, CURL_OFF_T_C(0)); my_setopt_str(curl, CURLOPT_KEYPASSWD, config->key_passwd); my_setopt_str(curl, CURLOPT_PROXY_KEYPASSWD, config->proxy_key_passwd); if(built_in_protos & (CURLPROTO_SCP|CURLPROTO_SFTP)) { /* SSH and SSL private key uses same command-line option */ /* new in libcurl 7.16.1 */ my_setopt_str(curl, CURLOPT_SSH_PRIVATE_KEYFILE, config->key); /* new in libcurl 7.16.1 */ my_setopt_str(curl, CURLOPT_SSH_PUBLIC_KEYFILE, config->pubkey); /* new in libcurl 7.17.1: SSH host key md5 checking allows us to fail if we are not talking to who we think we should */ my_setopt_str(curl, CURLOPT_SSH_HOST_PUBLIC_KEY_MD5, config->hostpubmd5); /* new in libcurl 7.56.0 */ if(config->ssh_compression) my_setopt(curl, CURLOPT_SSH_COMPRESSION, 1L); } if(config->cacert) my_setopt_str(curl, CURLOPT_CAINFO, config->cacert); if(config->proxy_cacert) my_setopt_str(curl, CURLOPT_PROXY_CAINFO, config->proxy_cacert); if(config->capath) { result = res_setopt_str(curl, CURLOPT_CAPATH, config->capath); if(result == CURLE_NOT_BUILT_IN) { warnf(config->global, "ignoring %s, not supported by libcurl\n", capath_from_env? "SSL_CERT_DIR environment variable":"--capath"); } else if(result) break; } /* For the time being if --proxy-capath is not set then we use the --capath value for it, if any. See #1257 */ if((config->proxy_capath || config->capath) && !tool_setopt_skip(CURLOPT_PROXY_CAPATH)) { result = res_setopt_str(curl, CURLOPT_PROXY_CAPATH, (config->proxy_capath ? config->proxy_capath : config->capath)); if(result == CURLE_NOT_BUILT_IN) { if(config->proxy_capath) { warnf(config->global, "ignoring --proxy-capath, not supported by libcurl\n"); } } else if(result) break; } if(config->crlfile) my_setopt_str(curl, CURLOPT_CRLFILE, config->crlfile); if(config->proxy_crlfile) my_setopt_str(curl, CURLOPT_PROXY_CRLFILE, config->proxy_crlfile); else if(config->crlfile) /* CURLOPT_PROXY_CRLFILE default is crlfile */ my_setopt_str(curl, CURLOPT_PROXY_CRLFILE, config->crlfile); if(config->pinnedpubkey) my_setopt_str(curl, CURLOPT_PINNEDPUBLICKEY, config->pinnedpubkey); if(config->ssl_ec_curves) my_setopt_str(curl, CURLOPT_SSL_EC_CURVES, config->ssl_ec_curves); if(curlinfo->features & CURL_VERSION_SSL) { /* Check if config->cert is a PKCS#11 URI and set the * config->cert_type if necessary */ if(config->cert) { if(!config->cert_type) { if(is_pkcs11_uri(config->cert)) { config->cert_type = strdup("ENG"); } } } /* Check if config->key is a PKCS#11 URI and set the * config->key_type if necessary */ if(config->key) { if(!config->key_type) { if(is_pkcs11_uri(config->key)) { config->key_type = strdup("ENG"); } } } /* Check if config->proxy_cert is a PKCS#11 URI and set the * config->proxy_type if necessary */ if(config->proxy_cert) { if(!config->proxy_cert_type) { if(is_pkcs11_uri(config->proxy_cert)) { config->proxy_cert_type = strdup("ENG"); } } } /* Check if config->proxy_key is a PKCS#11 URI and set the * config->proxy_key_type if necessary */ if(config->proxy_key) { if(!config->proxy_key_type) { if(is_pkcs11_uri(config->proxy_key)) { config->proxy_key_type = strdup("ENG"); } } } /* In debug build of curl tool, using * --cert loadmem=: --cert-type p12 * must do the same thing than classic: * --cert : --cert-type p12 * but is designed to test blob */ #if defined(CURLDEBUG) || defined(DEBUGBUILD) if(config->cert && (strlen(config->cert) > 8) && (memcmp(config->cert, "loadmem=",8) == 0)) { FILE *fInCert = fopen(config->cert + 8, "rb"); void *certdata = NULL; long filesize = 0; bool continue_reading = fInCert != NULL; if(continue_reading) continue_reading = fseek(fInCert, 0, SEEK_END) == 0; if(continue_reading) filesize = ftell(fInCert); if(filesize < 0) continue_reading = FALSE; if(continue_reading) continue_reading = fseek(fInCert, 0, SEEK_SET) == 0; if(continue_reading) certdata = malloc(((size_t)filesize) + 1); if((!certdata) || ((int)fread(certdata, (size_t)filesize, 1, fInCert) != 1)) continue_reading = FALSE; if(fInCert) fclose(fInCert); if((filesize > 0) && continue_reading) { struct curl_blob structblob; structblob.data = certdata; structblob.len = (size_t)filesize; structblob.flags = CURL_BLOB_COPY; my_setopt_str(curl, CURLOPT_SSLCERT_BLOB, &structblob); /* if test run well, we are sure we don't reuse * original mem pointer */ memset(certdata, 0, (size_t)filesize); } free(certdata); } else #endif my_setopt_str(curl, CURLOPT_SSLCERT, config->cert); my_setopt_str(curl, CURLOPT_PROXY_SSLCERT, config->proxy_cert); my_setopt_str(curl, CURLOPT_SSLCERTTYPE, config->cert_type); my_setopt_str(curl, CURLOPT_PROXY_SSLCERTTYPE, config->proxy_cert_type); #if defined(CURLDEBUG) || defined(DEBUGBUILD) if(config->key && (strlen(config->key) > 8) && (memcmp(config->key, "loadmem=",8) == 0)) { FILE *fInCert = fopen(config->key + 8, "rb"); void *certdata = NULL; long filesize = 0; bool continue_reading = fInCert != NULL; if(continue_reading) continue_reading = fseek(fInCert, 0, SEEK_END) == 0; if(continue_reading) filesize = ftell(fInCert); if(filesize < 0) continue_reading = FALSE; if(continue_reading) continue_reading = fseek(fInCert, 0, SEEK_SET) == 0; if(continue_reading) certdata = malloc(((size_t)filesize) + 1); if((!certdata) || ((int)fread(certdata, (size_t)filesize, 1, fInCert) != 1)) continue_reading = FALSE; if(fInCert) fclose(fInCert); if((filesize > 0) && continue_reading) { struct curl_blob structblob; structblob.data = certdata; structblob.len = (size_t)filesize; structblob.flags = CURL_BLOB_COPY; my_setopt_str(curl, CURLOPT_SSLKEY_BLOB, &structblob); /* if test run well, we are sure we don't reuse * original mem pointer */ memset(certdata, 0, (size_t)filesize); } free(certdata); } else #endif my_setopt_str(curl, CURLOPT_SSLKEY, config->key); my_setopt_str(curl, CURLOPT_PROXY_SSLKEY, config->proxy_key); my_setopt_str(curl, CURLOPT_SSLKEYTYPE, config->key_type); my_setopt_str(curl, CURLOPT_PROXY_SSLKEYTYPE, config->proxy_key_type); my_setopt_str(curl, CURLOPT_AWS_SIGV4, config->aws_sigv4_provider); if(config->insecure_ok) { my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L); my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L); } else { my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L); /* libcurl default is strict verifyhost -> 2L */ /* my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 2L); */ } if(config->proxy_insecure_ok) { my_setopt(curl, CURLOPT_PROXY_SSL_VERIFYPEER, 0L); my_setopt(curl, CURLOPT_PROXY_SSL_VERIFYHOST, 0L); } else { my_setopt(curl, CURLOPT_PROXY_SSL_VERIFYPEER, 1L); } if(config->verifystatus) my_setopt(curl, CURLOPT_SSL_VERIFYSTATUS, 1L); if(config->falsestart) my_setopt(curl, CURLOPT_SSL_FALSESTART, 1L); my_setopt_enum(curl, CURLOPT_SSLVERSION, config->ssl_version | config->ssl_version_max); my_setopt_enum(curl, CURLOPT_PROXY_SSLVERSION, config->proxy_ssl_version); { long mask = (config->ssl_allow_beast ? CURLSSLOPT_ALLOW_BEAST : 0) | (config->ssl_revoke_best_effort ? CURLSSLOPT_REVOKE_BEST_EFFORT : 0) | (config->native_ca_store ? CURLSSLOPT_NATIVE_CA : 0) | (config->ssl_no_revoke ? CURLSSLOPT_NO_REVOKE : 0); if(mask) my_setopt_bitmask(curl, CURLOPT_SSL_OPTIONS, mask); } if(config->proxy_ssl_allow_beast) my_setopt(curl, CURLOPT_PROXY_SSL_OPTIONS, (long)CURLSSLOPT_ALLOW_BEAST); } if(config->path_as_is) my_setopt(curl, CURLOPT_PATH_AS_IS, 1L); if((built_in_protos & (CURLPROTO_SCP|CURLPROTO_SFTP)) && !config->insecure_ok) { char *home = homedir(NULL); if(home) { char *file = aprintf("%s/.ssh/known_hosts", home); if(file) { /* new in curl 7.19.6 */ result = res_setopt_str(curl, CURLOPT_SSH_KNOWNHOSTS, file); curl_free(file); if(result == CURLE_UNKNOWN_OPTION) /* libssh2 version older than 1.1.1 */ result = CURLE_OK; } Curl_safefree(home); if(result) break; } else warnf(global, "No home dir, couldn't find known_hosts file!"); } if(config->no_body || config->remote_time) { /* no body or use remote time */ my_setopt(curl, CURLOPT_FILETIME, 1L); } my_setopt(curl, CURLOPT_CRLF, config->crlf?1L:0L); my_setopt_slist(curl, CURLOPT_QUOTE, config->quote); my_setopt_slist(curl, CURLOPT_POSTQUOTE, config->postquote); my_setopt_slist(curl, CURLOPT_PREQUOTE, config->prequote); if(config->cookie) my_setopt_str(curl, CURLOPT_COOKIE, config->cookie); if(config->cookiefile) my_setopt_str(curl, CURLOPT_COOKIEFILE, config->cookiefile); /* new in libcurl 7.9 */ if(config->cookiejar) my_setopt_str(curl, CURLOPT_COOKIEJAR, config->cookiejar); /* new in libcurl 7.9.7 */ my_setopt(curl, CURLOPT_COOKIESESSION, config->cookiesession?1L:0L); my_setopt_enum(curl, CURLOPT_TIMECONDITION, (long)config->timecond); my_setopt(curl, CURLOPT_TIMEVALUE_LARGE, config->condtime); my_setopt_str(curl, CURLOPT_CUSTOMREQUEST, config->customrequest); customrequest_helper(config, config->httpreq, config->customrequest); my_setopt(curl, CURLOPT_STDERR, global->errors); /* three new ones in libcurl 7.3: */ my_setopt_str(curl, CURLOPT_INTERFACE, config->iface); my_setopt_str(curl, CURLOPT_KRBLEVEL, config->krblevel); progressbarinit(&per->progressbar, config); if((global->progressmode == CURL_PROGRESS_BAR) && !global->noprogress && !global->mute) { /* we want the alternative style, then we have to implement it ourselves! */ my_setopt(curl, CURLOPT_XFERINFOFUNCTION, tool_progress_cb); my_setopt(curl, CURLOPT_XFERINFODATA, per); } else if(per->uploadfile && !strcmp(per->uploadfile, ".")) { /* when reading from stdin in non-blocking mode, we use the progress function to unpause a busy read */ my_setopt(curl, CURLOPT_NOPROGRESS, 0L); my_setopt(curl, CURLOPT_XFERINFOFUNCTION, tool_readbusy_cb); my_setopt(curl, CURLOPT_XFERINFODATA, per); } /* new in libcurl 7.24.0: */ if(config->dns_servers) my_setopt_str(curl, CURLOPT_DNS_SERVERS, config->dns_servers); /* new in libcurl 7.33.0: */ if(config->dns_interface) my_setopt_str(curl, CURLOPT_DNS_INTERFACE, config->dns_interface); if(config->dns_ipv4_addr) my_setopt_str(curl, CURLOPT_DNS_LOCAL_IP4, config->dns_ipv4_addr); if(config->dns_ipv6_addr) my_setopt_str(curl, CURLOPT_DNS_LOCAL_IP6, config->dns_ipv6_addr); /* new in libcurl 7.6.2: */ my_setopt_slist(curl, CURLOPT_TELNETOPTIONS, config->telnet_options); /* new in libcurl 7.7: */ my_setopt_str(curl, CURLOPT_RANDOM_FILE, config->random_file); my_setopt_str(curl, CURLOPT_EGDSOCKET, config->egd_file); my_setopt(curl, CURLOPT_CONNECTTIMEOUT_MS, (long)(config->connecttimeout * 1000)); if(config->doh_url) my_setopt_str(curl, CURLOPT_DOH_URL, config->doh_url); if(config->cipher_list) my_setopt_str(curl, CURLOPT_SSL_CIPHER_LIST, config->cipher_list); if(config->proxy_cipher_list) my_setopt_str(curl, CURLOPT_PROXY_SSL_CIPHER_LIST, config->proxy_cipher_list); if(config->cipher13_list) my_setopt_str(curl, CURLOPT_TLS13_CIPHERS, config->cipher13_list); if(config->proxy_cipher13_list) my_setopt_str(curl, CURLOPT_PROXY_TLS13_CIPHERS, config->proxy_cipher13_list); /* new in libcurl 7.9.2: */ if(config->disable_epsv) /* disable it */ my_setopt(curl, CURLOPT_FTP_USE_EPSV, 0L); /* new in libcurl 7.10.5 */ if(config->disable_eprt) /* disable it */ my_setopt(curl, CURLOPT_FTP_USE_EPRT, 0L); if(global->tracetype != TRACE_NONE) { my_setopt(curl, CURLOPT_DEBUGFUNCTION, tool_debug_cb); my_setopt(curl, CURLOPT_DEBUGDATA, config); my_setopt(curl, CURLOPT_VERBOSE, 1L); } /* new in curl 7.9.3 */ if(config->engine) { result = res_setopt_str(curl, CURLOPT_SSLENGINE, config->engine); if(result) break; } /* new in curl 7.10.7, extended in 7.19.4. Modified to use CREATE_DIR_RETRY in 7.49.0 */ my_setopt(curl, CURLOPT_FTP_CREATE_MISSING_DIRS, (long)(config->ftp_create_dirs? CURLFTP_CREATE_DIR_RETRY: CURLFTP_CREATE_DIR_NONE)); /* new in curl 7.10.8 */ if(config->max_filesize) my_setopt(curl, CURLOPT_MAXFILESIZE_LARGE, config->max_filesize); my_setopt(curl, CURLOPT_IPRESOLVE, config->ip_version); /* new in curl 7.15.5 */ if(config->ftp_ssl_reqd) my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_ALL); /* new in curl 7.11.0 */ else if(config->ftp_ssl) my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_TRY); /* new in curl 7.16.0 */ else if(config->ftp_ssl_control) my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_CONTROL); /* new in curl 7.16.1 */ if(config->ftp_ssl_ccc) my_setopt_enum(curl, CURLOPT_FTP_SSL_CCC, (long)config->ftp_ssl_ccc_mode); /* new in curl 7.19.4 */ if(config->socks5_gssapi_nec) my_setopt_str(curl, CURLOPT_SOCKS5_GSSAPI_NEC, config->socks5_gssapi_nec); /* new in curl 7.55.0 */ if(config->socks5_auth) my_setopt_bitmask(curl, CURLOPT_SOCKS5_AUTH, (long)config->socks5_auth); /* new in curl 7.43.0 */ if(config->proxy_service_name) my_setopt_str(curl, CURLOPT_PROXY_SERVICE_NAME, config->proxy_service_name); /* new in curl 7.43.0 */ if(config->service_name) my_setopt_str(curl, CURLOPT_SERVICE_NAME, config->service_name); /* curl 7.13.0 */ my_setopt_str(curl, CURLOPT_FTP_ACCOUNT, config->ftp_account); my_setopt(curl, CURLOPT_IGNORE_CONTENT_LENGTH, config->ignorecl?1L:0L); /* curl 7.14.2 */ my_setopt(curl, CURLOPT_FTP_SKIP_PASV_IP, config->ftp_skip_ip?1L:0L); /* curl 7.15.1 */ my_setopt(curl, CURLOPT_FTP_FILEMETHOD, (long)config->ftp_filemethod); /* curl 7.15.2 */ if(config->localport) { my_setopt(curl, CURLOPT_LOCALPORT, config->localport); my_setopt_str(curl, CURLOPT_LOCALPORTRANGE, config->localportrange); } /* curl 7.15.5 */ my_setopt_str(curl, CURLOPT_FTP_ALTERNATIVE_TO_USER, config->ftp_alternative_to_user); /* curl 7.16.0 */ if(config->disable_sessionid) /* disable it */ my_setopt(curl, CURLOPT_SSL_SESSIONID_CACHE, 0L); /* curl 7.16.2 */ if(config->raw) { my_setopt(curl, CURLOPT_HTTP_CONTENT_DECODING, 0L); my_setopt(curl, CURLOPT_HTTP_TRANSFER_DECODING, 0L); } /* curl 7.17.1 */ if(!config->nokeepalive) { my_setopt(curl, CURLOPT_TCP_KEEPALIVE, 1L); if(config->alivetime != 0) { my_setopt(curl, CURLOPT_TCP_KEEPIDLE, config->alivetime); my_setopt(curl, CURLOPT_TCP_KEEPINTVL, config->alivetime); } } else my_setopt(curl, CURLOPT_TCP_KEEPALIVE, 0L); /* curl 7.20.0 */ if(config->tftp_blksize) my_setopt(curl, CURLOPT_TFTP_BLKSIZE, config->tftp_blksize); if(config->mail_from) my_setopt_str(curl, CURLOPT_MAIL_FROM, config->mail_from); if(config->mail_rcpt) my_setopt_slist(curl, CURLOPT_MAIL_RCPT, config->mail_rcpt); /* curl 7.69.x */ my_setopt(curl, CURLOPT_MAIL_RCPT_ALLLOWFAILS, config->mail_rcpt_allowfails ? 1L : 0L); /* curl 7.20.x */ if(config->ftp_pret) my_setopt(curl, CURLOPT_FTP_USE_PRET, 1L); if(config->proto_present) my_setopt_flags(curl, CURLOPT_PROTOCOLS, config->proto); if(config->proto_redir_present) my_setopt_flags(curl, CURLOPT_REDIR_PROTOCOLS, config->proto_redir); if(config->content_disposition && (urlnode->flags & GETOUT_USEREMOTE)) hdrcbdata->honor_cd_filename = TRUE; else hdrcbdata->honor_cd_filename = FALSE; hdrcbdata->outs = outs; hdrcbdata->heads = heads; hdrcbdata->etag_save = etag_save; hdrcbdata->global = global; hdrcbdata->config = config; my_setopt(curl, CURLOPT_HEADERFUNCTION, tool_header_cb); my_setopt(curl, CURLOPT_HEADERDATA, per); if(config->resolve) /* new in 7.21.3 */ my_setopt_slist(curl, CURLOPT_RESOLVE, config->resolve); if(config->connect_to) /* new in 7.49.0 */ my_setopt_slist(curl, CURLOPT_CONNECT_TO, config->connect_to); /* new in 7.21.4 */ if(curlinfo->features & CURL_VERSION_TLSAUTH_SRP) { if(config->tls_username) my_setopt_str(curl, CURLOPT_TLSAUTH_USERNAME, config->tls_username); if(config->tls_password) my_setopt_str(curl, CURLOPT_TLSAUTH_PASSWORD, config->tls_password); if(config->tls_authtype) my_setopt_str(curl, CURLOPT_TLSAUTH_TYPE, config->tls_authtype); if(config->proxy_tls_username) my_setopt_str(curl, CURLOPT_PROXY_TLSAUTH_USERNAME, config->proxy_tls_username); if(config->proxy_tls_password) my_setopt_str(curl, CURLOPT_PROXY_TLSAUTH_PASSWORD, config->proxy_tls_password); if(config->proxy_tls_authtype) my_setopt_str(curl, CURLOPT_PROXY_TLSAUTH_TYPE, config->proxy_tls_authtype); } /* new in 7.22.0 */ if(config->gssapi_delegation) my_setopt_str(curl, CURLOPT_GSSAPI_DELEGATION, config->gssapi_delegation); if(config->mail_auth) my_setopt_str(curl, CURLOPT_MAIL_AUTH, config->mail_auth); /* new in 7.66.0 */ if(config->sasl_authzid) my_setopt_str(curl, CURLOPT_SASL_AUTHZID, config->sasl_authzid); /* new in 7.31.0 */ if(config->sasl_ir) my_setopt(curl, CURLOPT_SASL_IR, 1L); if(config->nonpn) { my_setopt(curl, CURLOPT_SSL_ENABLE_NPN, 0L); } if(config->noalpn) { my_setopt(curl, CURLOPT_SSL_ENABLE_ALPN, 0L); } /* new in 7.40.0, abstract support added in 7.53.0 */ if(config->unix_socket_path) { if(config->abstract_unix_socket) { my_setopt_str(curl, CURLOPT_ABSTRACT_UNIX_SOCKET, config->unix_socket_path); } else { my_setopt_str(curl, CURLOPT_UNIX_SOCKET_PATH, config->unix_socket_path); } } /* new in 7.45.0 */ if(config->proto_default) my_setopt_str(curl, CURLOPT_DEFAULT_PROTOCOL, config->proto_default); /* new in 7.47.0 */ if(config->expect100timeout > 0) my_setopt_str(curl, CURLOPT_EXPECT_100_TIMEOUT_MS, (long)(config->expect100timeout*1000)); /* new in 7.48.0 */ if(config->tftp_no_options) my_setopt(curl, CURLOPT_TFTP_NO_OPTIONS, 1L); /* new in 7.59.0 */ if(config->happy_eyeballs_timeout_ms != CURL_HET_DEFAULT) my_setopt(curl, CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS, config->happy_eyeballs_timeout_ms); /* new in 7.60.0 */ if(config->haproxy_protocol) my_setopt(curl, CURLOPT_HAPROXYPROTOCOL, 1L); if(config->disallow_username_in_url) my_setopt(curl, CURLOPT_DISALLOW_USERNAME_IN_URL, 1L); if(config->altsvc) my_setopt_str(curl, CURLOPT_ALTSVC, config->altsvc); if(config->hsts) my_setopt_str(curl, CURLOPT_HSTS, config->hsts); #ifdef USE_METALINK if(!metalink && config->use_metalink) { outs->metalink_parser = metalink_parser_context_new(); if(outs->metalink_parser == NULL) { result = CURLE_OUT_OF_MEMORY; break; } fprintf(config->global->errors, "Metalink: parsing (%s) metalink/XML...\n", per->this_url); } else if(metalink) fprintf(config->global->errors, "Metalink: fetching (%s) from (%s)...\n", mlfile->filename, per->this_url); #endif /* USE_METALINK */ per->metalink = metalink; /* initialize retry vars for loop below */ per->retry_sleep_default = (config->retry_delay) ? config->retry_delay*1000L : RETRY_SLEEP_DEFAULT; /* ms */ per->retry_numretries = config->req_retry; per->retry_sleep = per->retry_sleep_default; /* ms */ per->retrystart = tvnow(); state->li++; /* Here's looping around each globbed URL */ if(state->li >= urlnum) { state->li = 0; state->urlnum = 0; /* forced reglob of URLs */ glob_cleanup(state->urls); state->urls = NULL; state->up++; Curl_safefree(state->uploadfile); /* clear it to get the next */ } } else { /* Free this URL node data without destroying the the node itself nor modifying next pointer. */ Curl_safefree(urlnode->outfile); Curl_safefree(urlnode->infile); urlnode->flags = 0; glob_cleanup(state->urls); state->urls = NULL; state->urlnum = 0; Curl_safefree(state->outfiles); Curl_safefree(state->uploadfile); if(state->inglob) { /* Free list of globbed upload files */ glob_cleanup(state->inglob); state->inglob = NULL; } config->state.urlnode = urlnode->next; state->up = 0; continue; } } break; } if(!*added || result) { *added = FALSE; single_transfer_cleanup(config); } return result; } static long all_added; /* number of easy handles currently added */ /* * add_parallel_transfers() sets 'morep' to TRUE if there are more transfers * to add even after this call returns. sets 'addedp' to TRUE if one or more * transfers were added. */ static CURLcode add_parallel_transfers(struct GlobalConfig *global, CURLM *multi, CURLSH *share, bool *morep, bool *addedp) { struct per_transfer *per; CURLcode result = CURLE_OK; CURLMcode mcode; bool sleeping = FALSE; *addedp = FALSE; *morep = FALSE; result = create_transfer(global, share, addedp); if(result) return result; for(per = transfers; per && (all_added < global->parallel_max); per = per->next) { bool getadded = FALSE; if(per->added) /* already added */ continue; if(per->startat && (time(NULL) < per->startat)) { /* this is still delaying */ sleeping = TRUE; continue; } result = pre_transfer(global, per); if(result) return result; /* parallel connect means that we don't set PIPEWAIT since pipewait will make libcurl prefer multiplexing */ (void)curl_easy_setopt(per->curl, CURLOPT_PIPEWAIT, global->parallel_connect ? 0L : 1L); (void)curl_easy_setopt(per->curl, CURLOPT_PRIVATE, per); (void)curl_easy_setopt(per->curl, CURLOPT_XFERINFOFUNCTION, xferinfo_cb); (void)curl_easy_setopt(per->curl, CURLOPT_XFERINFODATA, per); mcode = curl_multi_add_handle(multi, per->curl); if(mcode) return CURLE_OUT_OF_MEMORY; result = create_transfer(global, share, &getadded); if(result) return result; per->added = TRUE; all_added++; *addedp = TRUE; } *morep = (per || sleeping) ? TRUE : FALSE; return CURLE_OK; } static CURLcode parallel_transfers(struct GlobalConfig *global, CURLSH *share) { CURLM *multi; CURLMcode mcode = CURLM_OK; CURLcode result = CURLE_OK; int still_running = 1; struct timeval start = tvnow(); bool more_transfers; bool added_transfers; time_t tick = time(NULL); multi = curl_multi_init(); if(!multi) return CURLE_OUT_OF_MEMORY; result = add_parallel_transfers(global, multi, share, &more_transfers, &added_transfers); if(result) { curl_multi_cleanup(multi); return result; } while(!mcode && (still_running || more_transfers)) { mcode = curl_multi_poll(multi, NULL, 0, 1000, NULL); if(!mcode) mcode = curl_multi_perform(multi, &still_running); progress_meter(global, &start, FALSE); if(!mcode) { int rc; CURLMsg *msg; bool checkmore = FALSE; do { msg = curl_multi_info_read(multi, &rc); if(msg) { bool retry; long delay; struct per_transfer *ended; CURL *easy = msg->easy_handle; result = msg->data.result; curl_easy_getinfo(easy, CURLINFO_PRIVATE, (void *)&ended); curl_multi_remove_handle(multi, easy); result = post_per_transfer(global, ended, result, &retry, &delay); progress_finalize(ended); /* before it goes away */ all_added--; /* one fewer added */ checkmore = TRUE; if(retry) { ended->added = FALSE; /* add it again */ /* we delay retries in full integer seconds only */ ended->startat = delay ? time(NULL) + delay/1000 : 0; } else (void)del_per_transfer(ended); } } while(msg); if(!checkmore) { time_t tock = time(NULL); if(tick != tock) { checkmore = TRUE; tick = tock; } } if(checkmore) { /* one or more transfers completed, add more! */ (void)add_parallel_transfers(global, multi, share, &more_transfers, &added_transfers); if(added_transfers) /* we added new ones, make sure the loop doesn't exit yet */ still_running = 1; } } } (void)progress_meter(global, &start, TRUE); /* Make sure to return some kind of error if there was a multi problem */ if(mcode) { result = (mcode == CURLM_OUT_OF_MEMORY) ? CURLE_OUT_OF_MEMORY : /* The other multi errors should never happen, so return something suitably generic */ CURLE_BAD_FUNCTION_ARGUMENT; } curl_multi_cleanup(multi); return result; } static CURLcode serial_transfers(struct GlobalConfig *global, CURLSH *share) { CURLcode returncode = CURLE_OK; CURLcode result = CURLE_OK; struct per_transfer *per; bool added = FALSE; result = create_transfer(global, share, &added); if(result || !added) return result; for(per = transfers; per;) { bool retry; long delay; bool bailout = FALSE; result = pre_transfer(global, per); if(result) break; #ifndef CURL_DISABLE_LIBCURL_OPTION if(global->libcurl) { result = easysrc_perform(); if(result) break; } #endif #ifdef CURLDEBUG if(global->test_event_based) result = curl_easy_perform_ev(per->curl); else #endif result = curl_easy_perform(per->curl); /* store the result of the actual transfer */ returncode = result; result = post_per_transfer(global, per, result, &retry, &delay); if(retry) { tool_go_sleep(delay); continue; } /* Bail out upon critical errors or --fail-early */ if(result || is_fatal_error(returncode) || (returncode && global->fail_early)) bailout = TRUE; else { /* setup the next one just before we delete this */ result = create_transfer(global, share, &added); if(result) bailout = TRUE; } /* Release metalink related resources here */ delete_metalinkfile(per->mlfile); per = del_per_transfer(per); if(bailout) break; } if(returncode) /* returncode errors have priority */ result = returncode; if(result) single_transfer_cleanup(global->current); return result; } /* setup a transfer for the given config */ static CURLcode transfer_per_config(struct GlobalConfig *global, struct OperationConfig *config, CURLSH *share, bool *added) { CURLcode result = CURLE_OK; bool capath_from_env; *added = FALSE; /* Check we have a url */ if(!config->url_list || !config->url_list->url) { helpf(global->errors, "no URL specified!\n"); return CURLE_FAILED_INIT; } /* On WIN32 we can't set the path to curl-ca-bundle.crt * at compile time. So we look here for the file in two ways: * 1: look at the environment variable CURL_CA_BUNDLE for a path * 2: if #1 isn't found, use the windows API function SearchPath() * to find it along the app's path (includes app's dir and CWD) * * We support the environment variable thing for non-Windows platforms * too. Just for the sake of it. */ capath_from_env = false; if(!config->cacert && !config->capath && !config->insecure_ok) { CURL *curltls = curl_easy_init(); struct curl_tlssessioninfo *tls_backend_info = NULL; /* With the addition of CAINFO support for Schannel, this search could find * a certificate bundle that was previously ignored. To maintain backward * compatibility, only perform this search if not using Schannel. */ result = curl_easy_getinfo(curltls, CURLINFO_TLS_SSL_PTR, &tls_backend_info); if(result) return result; /* Set the CA cert locations specified in the environment. For Windows if * no environment-specified filename is found then check for CA bundle * default filename curl-ca-bundle.crt in the user's PATH. * * If Schannel is the selected SSL backend then these locations are * ignored. We allow setting CA location for schannel only when explicitly * specified by the user via CURLOPT_CAINFO / --cacert. */ if(tls_backend_info->backend != CURLSSLBACKEND_SCHANNEL) { char *env; env = curlx_getenv("CURL_CA_BUNDLE"); if(env) { config->cacert = strdup(env); if(!config->cacert) { curl_free(env); errorf(global, "out of memory\n"); return CURLE_OUT_OF_MEMORY; } } else { env = curlx_getenv("SSL_CERT_DIR"); if(env) { config->capath = strdup(env); if(!config->capath) { curl_free(env); helpf(global->errors, "out of memory\n"); return CURLE_OUT_OF_MEMORY; } capath_from_env = true; } else { env = curlx_getenv("SSL_CERT_FILE"); if(env) { config->cacert = strdup(env); if(!config->cacert) { curl_free(env); errorf(global, "out of memory\n"); return CURLE_OUT_OF_MEMORY; } } } } if(env) curl_free(env); #ifdef WIN32 else { result = FindWin32CACert(config, tls_backend_info->backend, TEXT("curl-ca-bundle.crt")); } #endif } curl_easy_cleanup(curltls); } if(!result) result = single_transfer(global, config, share, capath_from_env, added); return result; } /* * 'create_transfer' gets the details and sets up a new transfer if 'added' * returns TRUE. */ static CURLcode create_transfer(struct GlobalConfig *global, CURLSH *share, bool *added) { CURLcode result = CURLE_OK; *added = FALSE; while(global->current) { result = transfer_per_config(global, global->current, share, added); if(!result && !*added) { /* when one set is drained, continue to next */ global->current = global->current->next; continue; } break; } return result; } static CURLcode run_all_transfers(struct GlobalConfig *global, CURLSH *share, CURLcode result) { /* Save the values of noprogress and isatty to restore them later on */ bool orig_noprogress = global->noprogress; bool orig_isatty = global->isatty; struct per_transfer *per; /* Time to actually do the transfers */ if(!result) { if(global->parallel) result = parallel_transfers(global, share); else result = serial_transfers(global, share); } /* cleanup if there are any left */ for(per = transfers; per;) { bool retry; long delay; CURLcode result2 = post_per_transfer(global, per, result, &retry, &delay); if(!result) /* don't overwrite the original error */ result = result2; /* Free list of given URLs */ clean_getout(per->config); /* Release metalink related resources here */ clean_metalink(per->config); per = del_per_transfer(per); } /* Reset the global config variables */ global->noprogress = orig_noprogress; global->isatty = orig_isatty; return result; } CURLcode operate(struct GlobalConfig *global, int argc, argv_item_t argv[]) { CURLcode result = CURLE_OK; char *first_arg = curlx_convert_tchar_to_UTF8(argv[1]); /* Setup proper locale from environment */ #ifdef HAVE_SETLOCALE setlocale(LC_ALL, ""); #endif /* Parse .curlrc if necessary */ if((argc == 1) || (first_arg && strncmp(first_arg, "-q", 2) && !curl_strequal(first_arg, "--disable"))) { parseconfig(NULL, global); /* ignore possible failure */ /* If we had no arguments then make sure a url was specified in .curlrc */ if((argc < 2) && (!global->first->url_list)) { helpf(global->errors, NULL); result = CURLE_FAILED_INIT; } } curlx_unicodefree(first_arg); if(!result) { /* Parse the command line arguments */ ParameterError res = parse_args(global, argc, argv); if(res) { result = CURLE_OK; /* Check if we were asked for the help */ if(res == PARAM_HELP_REQUESTED) tool_help(global->help_category); /* Check if we were asked for the manual */ else if(res == PARAM_MANUAL_REQUESTED) hugehelp(); /* Check if we were asked for the version information */ else if(res == PARAM_VERSION_INFO_REQUESTED) tool_version_info(); /* Check if we were asked to list the SSL engines */ else if(res == PARAM_ENGINES_REQUESTED) tool_list_engines(); else if(res == PARAM_LIBCURL_UNSUPPORTED_PROTOCOL) result = CURLE_UNSUPPORTED_PROTOCOL; else result = CURLE_FAILED_INIT; } else { #ifndef CURL_DISABLE_LIBCURL_OPTION if(global->libcurl) { /* Initialise the libcurl source output */ result = easysrc_init(); } #endif /* Perform the main operations */ if(!result) { size_t count = 0; struct OperationConfig *operation = global->first; CURLSH *share = curl_share_init(); if(!share) { #ifndef CURL_DISABLE_LIBCURL_OPTION if(global->libcurl) { /* Cleanup the libcurl source output */ easysrc_cleanup(); } #endif return CURLE_OUT_OF_MEMORY; } curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_COOKIE); curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_DNS); curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_SSL_SESSION); curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_CONNECT); curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_PSL); /* Get the required arguments for each operation */ do { result = get_args(operation, count++); operation = operation->next; } while(!result && operation); /* Set the current operation pointer */ global->current = global->first; /* now run! */ result = run_all_transfers(global, share, result); curl_share_cleanup(share); #ifndef CURL_DISABLE_LIBCURL_OPTION if(global->libcurl) { /* Cleanup the libcurl source output */ easysrc_cleanup(); /* Dump the libcurl code if previously enabled */ dumpeasysrc(global); } #endif } else errorf(global, "out of memory\n"); } } return result; }