#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# SPDX-License-Identifier: curl
#
###########################################################################
# Starter pipeline
# Start with a minimal pipeline that you can customize to build and deploy your code.
# Add steps that build, run tests, deploy, and more:
# https://aka.ms/yaml

trigger:
  branches:
    include:
    - 'master'
    - '*/ci'

pr:
  branches:
    include:
    - 'master'

stages:

##########################################
### Linux jobs first
##########################################

- stage: linux
  dependsOn: []
  jobs:
  - job: ubuntu
    # define defaults to make sure variables are always expanded/replaced
    variables:
      install: ''
      configure: ''
      tests: '!433'
    timeoutInMinutes: 60
    pool:
      vmImage: 'ubuntu-latest'
    strategy:
      matrix:
        default:
          name: default
          install:
          configure: --enable-debug --with-openssl
        disable_ipv6:
          name: w/o IPv6
          configure: --disable-ipv6 --with-openssl
        disable_http_smtp_imap:
          name: w/o HTTP/SMTP/IMAP
          configure: --disable-http --disable-smtp --disable-imap --without-ssl
        disable_thredres:
          name: sync resolver
          configure: --disable-threaded-resolver --with-openssl
        https_only:
          name: HTTPS only
          configure: --disable-dict --disable-file --disable-ftp --disable-gopher --disable-imap --disable-ldap --disable-pop3 --disable-rtmp --disable-rtsp --disable-scp --disable-sftp --disable-smb --disable-smtp --disable-telnet --disable-tftp --with-openssl
        torture:
          name: torture
          install: libnghttp2-dev
          configure: --enable-debug --disable-shared --disable-threaded-resolver --with-openssl
          tests: -n -t --shallow=25 !FTP
    steps:
    - script: sudo apt-get update && sudo apt-get install -y stunnel4 python3-impacket libzstd-dev libbrotli-dev $(install)
      displayName: 'apt install'
      retryCountOnTaskFailure: 3

    - script: autoreconf -fi && ./configure --enable-warnings --enable-werror $(configure)
      displayName: 'configure $(name)'

    - script: make V=1 && make V=1 examples && cd tests && make V=1
      displayName: 'compile'
      env:
        MAKEFLAGS: "-j 2"

    - script: make V=1 test-ci
      displayName: 'test'
      env:
        AZURE_ACCESS_TOKEN: "$(System.AccessToken)"
        TFLAGS: "-ac /usr/bin/curl -r $(tests)"

- stage: distcheck
  dependsOn: []
  jobs:
  - job: ubuntu
    timeoutInMinutes: 30
    pool:
      vmImage: 'ubuntu-latest'
    steps:
    - script: autoreconf -fi && ./configure --without-ssl
      displayName: 'configure $(name)'

    - script: make && ./maketgz 99.98.97
      displayName: 'make tarball'

    - script: |
        tar xf curl-99.98.97.tar.gz
        cd curl-99.98.97
        ./configure --prefix=$HOME/temp --without-ssl
        make
        make TFLAGS=1 test
        make install
        # basic check of the installed files
        cd ..
        bash scripts/installcheck.sh $HOME/temp
        rm -rf curl-99.98.97

      displayName: 'verify in-tree configure build'

    - script: |
        # verify out-of-tree build
        tar xf curl-99.98.97.tar.gz
        touch curl-99.98.97/docs/{cmdline-opts,libcurl}/Makefile.inc
        mkdir build
        cd build
        ../curl-99.98.97/configure --without-ssl
        make
        make TFLAGS='-p 1 1139' test
        # verify cmake build
        cd ..
        rm -rf curl-99.98.97

      displayName: 'verify out-of-tree configure build'

    - script: |
        tar xf curl-99.98.97.tar.gz
        cd curl-99.98.97
        mkdir build
        cd build
        cmake ..
        make

      displayName: 'verify out-of-tree cmake build'

- stage: scanbuild
  dependsOn: []
  jobs:
  - job: ubuntu
    timeoutInMinutes: 30
    pool:
      vmImage: 'ubuntu-latest'
    steps:
    - script: sudo apt-get update && sudo apt-get install -y clang-tools clang libssl-dev libssh2-1-dev libpsl-dev libbrotli-dev libzstd-dev
      displayName: 'apt install'
      retryCountOnTaskFailure: 3

    - script: autoreconf -fi
      displayName: 'autoreconf'

    - script: scan-build ./configure --enable-debug --enable-werror --with-openssl --with-libssh2
      displayName: 'configure'
      env:
        CC: "clang"
        CCX: "clang++"

    - script: scan-build --status-bugs make
      displayName: 'make'

    - script: scan-build --status-bugs make examples
      displayName: 'make examples'

##########################################
### Windows jobs below
##########################################

- stage: windows
  dependsOn: []
  variables:
    agent.preferPowerShellOnContainers: true
  jobs:
  - job: msys
    # define defaults to make sure variables are always expanded/replaced
    variables:
      container_img: ''
      container_cmd: ''
      configure: ''
      tests: ''
    timeoutInMinutes: 120
    pool:
      vmImage: 'windows-2019'
    strategy:
      matrix:
        v2_mingw32_openssl:
          name: 32-bit OpenSSL/libssh2
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2 mingw-w64-i686-python-pip mingw-w64-i686-python-wheel mingw-w64-i686-python-pyopenssl && python3 -m pip install --prefer-binary impacket
          configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --with-libssh2 --with-openssl
          tests: "~571"
        v2_mingw64_openssl:
          name: 64-bit OpenSSL/libssh2
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2 mingw-w64-x86_64-python-pip mingw-w64-x86_64-python-wheel mingw-w64-x86_64-python-pyopenssl && python3 -m pip install --prefer-binary impacket
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --with-libssh2 --with-openssl
          tests: "~571"
        v2_mingw64_libssh:
          name: 64-bit OpenSSL/libssh
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh-devel mingw-w64-x86_64-libssh
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --with-libssh --with-openssl
          tests: "~571 ~614"
        v1_mingw:
          name: 32-bit (legacy)
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=i686-pc-mingw32 --build=i686-pc-mingw32 --prefix=/mingw --enable-debug --without-ssl
          tests: "!203 !1143"
        v1_mingw32:
          name: 32-bit w/o zlib
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw32:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --without-zlib --without-ssl
          tests: "!203 !1143"
        v1_mingw64:
          name: 64-bit w/o zlib
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw64:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --without-zlib --without-ssl
          tests: "!203 !1143"
        v2_mingw32_schannel:
          name: 32-bit Schannel/SSPI/WinIDN/libssh2
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw32:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2 mingw-w64-i686-python-pip mingw-w64-i686-python-wheel mingw-w64-i686-python-pyopenssl && python3 -m pip install --prefer-binary impacket
          configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --with-libssh2
          tests: "~571"
        v2_mingw64_schannel:
          name: 64-bit Schannel/SSPI/WinIDN/libssh2
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys2-mingw64:ltsc2019
          container_cmd: C:\msys64\usr\bin\sh
          prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2 mingw-w64-x86_64-python-pip mingw-w64-x86_64-python-wheel mingw-w64-x86_64-python-pyopenssl && python3 -m pip install --prefer-binary impacket
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --with-libssh2
          tests: "~571"
        v1_mingw_schannel:
          name: 32-bit Schannel/SSPI/WinIDN (legacy)
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=i686-pc-mingw32 --build=i686-pc-mingw32 --prefix=/mingw --enable-debug --enable-sspi --with-schannel --with-winidn
          tests: "!203 !305 !311 !312 !313 !404 !1143 !2033 !2035 !2038 !2041 !2042 !2048 !2070 !2079 !2087 !3023 !3024"
        v1_mingw32_schannel:
          name: 32-bit Schannel/SSPI/WinIDN w/o zlib
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw32:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --without-zlib
          tests: "!203 !1143"
        v1_mingw64_schannel:
          name: 64-bit Schannel/SSPI/WinIDN w/o zlib
          container_img: ghcr.io/mback2k/curl-docker-winbuildenv/msys1-mingw64:ltsc2019
          container_cmd: C:\MinGW\msys\1.0\bin\sh
          configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64  --enable-debug --enable-werror --enable-sspi --with-schannel --with-winidn --without-zlib
          tests: "!203 !1143"
    container:
      image: $(container_img)
      env:
        MSYS2_PATH_TYPE: inherit
    steps:
    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && $(prepare)"
      displayName: 'prepare'
      condition: variables.prepare
      retryCountOnTaskFailure: 3

    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && autoreconf -fi && ./configure $(configure)"
      displayName: 'configure $(name)'

    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 && make V=1 examples && cd tests && make V=1"
      displayName: 'compile'
      env:
        MAKEFLAGS: "-j 2"

    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 install && PATH=/usr/bin:/bin find . -type f -path '*/.libs/*.exe' -print -execdir mv -t .. {} \;"
      displayName: 'install'

    - script: $(container_cmd) -l -c "cd $(echo '%cd%') && make V=1 test-ci"
      displayName: 'test'
      env:
        AZURE_ACCESS_TOKEN: "$(System.AccessToken)"
        TFLAGS: "-ac /usr/bin/curl.exe !IDN !SCP ~612 ~1056 $(tests)"