From ae1912cb0d494b48d514d937826c9fe83ec96c4d Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Wed, 29 Dec 1999 14:20:26 +0000 Subject: Initial revision --- missing | 188 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 188 insertions(+) create mode 100755 missing (limited to 'missing') diff --git a/missing b/missing new file mode 100755 index 000000000..cbe2b0ef0 --- /dev/null +++ b/missing @@ -0,0 +1,188 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. +# Copyright (C) 1996, 1997 Free Software Foundation, Inc. +# Franc,ois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +case "$1" in + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing - GNU libit 0.0" + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + + aclocal) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acinclude.m4' or \`configure.in'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`configure.in'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acconfig.h' or \`configure.in'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in` + if test -z "$files"; then + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in` + test -z "$files" || files="$files.in" + else + files=`echo "$files" | sed -e 's/:/ /g'` + fi + test -z "$files" && files="config.h.in" + touch $files + ;; + + automake) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print \ + | sed 's/^\(.*\).am$/touch \1.in/' \ + | sh + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequirements for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 -- cgit v1.2.1 From 1180ef4b317e6f91b23a931f6ea62de0bc024c45 Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Tue, 28 Aug 2001 09:01:50 +0000 Subject: added the most recent one from automake 1.5, it complained on the former one being "too old" --- missing | 133 ++++++++++++++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 114 insertions(+), 19 deletions(-) (limited to 'missing') diff --git a/missing b/missing index cbe2b0ef0..0a7fb5a2a 100755 --- a/missing +++ b/missing @@ -1,7 +1,7 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997 Free Software Foundation, Inc. -# Franc,ois Pinard , 1996. +# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -18,11 +18,37 @@ # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. case "$1" in -h|--h|--he|--hel|--help) @@ -35,6 +61,7 @@ error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' @@ -43,13 +70,15 @@ Supported PROGRAM values: automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing - GNU libit 0.0" + echo "missing 0.3 - GNU automake" ;; -*) @@ -61,7 +90,7 @@ Supported PROGRAM values: aclocal) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acinclude.m4' or \`configure.in'. You might want + you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 @@ -70,7 +99,7 @@ WARNING: \`$1' is missing on your system. You should only need it if autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if - you modified \`configure.in'. You might want to install the + you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure @@ -79,29 +108,31 @@ WARNING: \`$1' is missing on your system. You should only need it if autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acconfig.h' or \`configure.in'. You might want + you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in` - if test -z "$files"; then - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in` - test -z "$files" || files="$files.in" - else - files=`echo "$files" | sed -e 's/:/ /g'` - fi - test -z "$files" && files="config.h.in" - touch $files + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files ;; automake) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." - find . -type f -name Makefile.am -print \ - | sed 's/^\(.*\).am$/touch \1.in/' \ - | sh + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done ;; bison|yacc) @@ -157,7 +188,32 @@ WARNING: \`$1' is missing on your system. You should only need it if fi ;; + help2man) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -173,6 +229,45 @@ WARNING: \`$1' is missing on your system. You should only need it if touch $file ;; + tar) + shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar ${1+"$@"} && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar ${1+"$@"} && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" ${1+"$@"} && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" ${1+"$@"} && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your -- cgit v1.2.1 From f671d0513ccc9cdcd7516c732c719b2f31a9578e Mon Sep 17 00:00:00 2001 From: Gunter Knauf Date: Tue, 14 Jul 2009 13:25:14 +0000 Subject: renamed generated config.h to curl_config.h in order to avoid clashes when libcurl is used with other projects which also have a config.h. --- missing | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'missing') diff --git a/missing b/missing index 0a7fb5a2a..a9f9d941e 100755 --- a/missing +++ b/missing @@ -66,7 +66,7 @@ Options: Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' - autoheader touch file \`config.h.in' + autoheader touch file \`curl_config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c @@ -112,7 +112,7 @@ WARNING: \`$1' is missing on your system. You should only need it if to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" + test -z "$files" && files="curl_config.h" touch_files= for f in $files; do case "$f" in -- cgit v1.2.1