From 7e53974603079a9522acdb10f3b4de499ffa6e4d Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Sun, 19 Apr 2020 18:10:41 +0200 Subject: tests/FILEFORMAT: converted to markdown and extended Closes #5261 --- tests/FILEFORMAT | 485 ---------------------------------------------------- tests/FILEFORMAT.md | 468 ++++++++++++++++++++++++++++++++++++++++++++++++++ tests/Makefile.am | 2 +- tests/README | 38 +--- 4 files changed, 478 insertions(+), 515 deletions(-) delete mode 100644 tests/FILEFORMAT create mode 100644 tests/FILEFORMAT.md diff --git a/tests/FILEFORMAT b/tests/FILEFORMAT deleted file mode 100644 index 44e79ab5f..000000000 --- a/tests/FILEFORMAT +++ /dev/null @@ -1,485 +0,0 @@ - The test suite's file format is very simple and extensible, closely -resembling XML. All data for a single test case resides in a single -ASCII file. Labels mark the beginning and the end of all sections, and each -label must be written in its own line. Comments are either XML-style -(enclosed with ) or C-style (beginning with #) and must appear -on their own lines and not alongside actual test data. Most test data files -are syntactically valid XML, although a few files are not (lack of -support for character entities and the preservation of CR/LF characters at -the end of lines are the biggest differences). - - The file begins with a 'testcase' tag, which encompasses the remainder of -the file. - - - - Each file is split up in three main sections: reply, client and verify. The -reply section is used for the server to know what to send as a reply for the -requests curl sends, the client section defines how the client should behave -while the verify section defines how to verify that the data stored after a -command has been run ended up correctly. - - Each main section has a number of available subsections that can be -specified, that will be checked/used if specified. This document includes all -the subsections currently supported. - -Main sections are 'info', 'reply', 'client' and 'verify'. - - - -A newline-separated list of keywords describing what this test case uses and -tests. Try to use an already used keyword. These keywords will be used for -statistical/informational purposes and for choosing or skipping classes -of tests. "Keywords" must begin with an alphabetic character, "-", "[" -or "{" and may actually consist of multiple words separated by spaces -which are treated together as a single identifier. - - - - - -data to be sent to the client on its request and later verified that it arrived -safely. Set nocheck="yes" to prevent the test script from verifying the arrival -of this data. - -If the data contains 'swsclose' anywhere within the start and end tag, and -this is a HTTP test, then the connection will be closed by the server after -this response is sent. If not, the connection will be kept persistent. - -If the data contains 'swsbounce' anywhere within the start and end tag, the -HTTP server will detect if this is a second request using the same test and -part number and will then increase the part number with one. This is useful -for auth tests and similar. - -'sendzero' set to yes means that the (FTP) server will "send" the data even if -the size is zero bytes. Used to verify curl's behaviour on zero bytes -transfers. - -'base64' set to yes means that the data provided in the test-file is a chunk -of data encoded with base64. It is the only way a test case can contain binary -data. (This attribute can in fact be used on any section, but it doesn't make -much sense for other sections than "data"). - -'hex' set to yes means that the data is a sequence of hex pairs. It will get -decoded and used as "raw" data. - -For FTP file listings, the section will be used *only* if you make sure -that there has been a CWD done first to a directory named 'test-[num]' where -[num] is the test case number. Otherwise the ftp server can't know from which -test file to load the list content. - - - -Send back this contents instead of the one. The num is set by: -A) The test number in the request line is >10000 and this is the remainder -of [test case number]%10000. -B) The request was HTTP and included digest details, which adds 1000 to NUM -C) If a HTTP request is NTLM type-1, it adds 1001 to num -D) If a HTTP request is NTLM type-3, it adds 1002 to num -E) If a HTTP request is Basic and num is already >=1000, it adds 1 to num -F) If a HTTP request is Negotiate, num gets incremented by one for each -request with Negotiate authorization header on the same test case. - -Dynamically changing num in this way allows the test harness to be used to -test authentication negotiation where several different requests must be sent -to complete a transfer. The response to each request is found in its own data -section. Validating the entire negotiation sequence can be done by -specifying a datacheck section. - - -The connect section is used instead of the 'data' for all CONNECT -requests. The remainder of the rules for the data section then apply but with -a connect prefix. - - -if the data is sent but this is what should be checked afterwards. If -'nonewline' is set, we will cut off the trailing newline of this given data -before comparing with the one actually received by the client. - -Use the mode="text" attribute if the output is in text mode on platforms that -have a text/binary difference. - - -The contents of numbered datacheck sections are appended to the non-numbered -one. - - -number to return on a ftp SIZE command (set to -1 to make this command fail) - - -what to send back if the client sends a (FTP) MDTM command, set to -1 to -have it return that the file doesn't exist - - -special purpose server-command to control its behavior *after* the -reply is sent -For HTTP/HTTPS, these are supported: - -wait [secs] - - Pause for the given time - - -Special-commands for the server. -For FTP/SMTP/POP/IMAP, these are supported: - -REPLY [command] [return value] [response string] - - Changes how the server responds to the [command]. [response string] is - evaluated as a perl string, so it can contain embedded \r\n, for example. - There's a special [command] named "welcome" (without quotes) which is the - string sent immediately on connect as a welcome. -REPLYLF (like above but sends the response terminated with LF-only and not - CRLF) -COUNT [command] [num] - - Do the REPLY change for [command] only [num] times and then go back to the - built-in approach -DELAY [command] [secs] - - Delay responding to this command for the given time -RETRWEIRDO - - Enable the "weirdo" RETR case when multiple response lines appear at once - when a file is transferred -RETRNOSIZE - - Make sure the RETR response doesn't contain the size of the file -NOSAVE - - Don't actually save what is received -SLOWDOWN - - Send FTP responses with 0.01 sec delay between each byte -PASVBADIP - - makes PASV send back an illegal IP in its 227 response -CAPA [capabilities] - - Enables support for and specifies a list of space separated capabilities to - return to the client for the IMAP CAPABILITY, POP3 CAPA and SMTP EHLO - commands -AUTH [mechanisms] - - Enables support for SASL authentication and specifies a list of space - separated mechanisms for IMAP, POP3 and SMTP - -For HTTP/HTTPS: -auth_required if this is set and a POST/PUT is made without auth, the - server will NOT wait for the full request body to get sent -idle do nothing after receiving the request, just "sit idle" -stream continuously send data to the client, never-ending -writedelay: [secs] delay this amount between reply packets -skip: [num] instructs the server to ignore reading this many bytes from a - PUT or POST request -rtp: part [num] channel [num] size [num] - stream a fake RTP packet for the given part on a chosen channel - with the given payload size -connection-monitor When used, this will log [DISCONNECT] to the server.input - log when the connection is disconnected. -upgrade when an HTTP upgrade header is found, the server will upgrade - to http2 -swsclose instruct server to close connection after response -no-expect don't read the request body if Expect: is present - -For TFTP: -writedelay: [secs] delay this amount between reply packets (each packet being - 512 bytes payload) - - - - - - -What server(s) this test case requires/uses: - -file -ftp -ftp-ipv6 -ftps -http -http-ipv6 -http-proxy -http-unix -https -httptls+srp -httptls+srp-ipv6 -http/2 -imap -none -pop3 -rtsp -rtsp-ipv6 -scp -sftp -smtp -socks4 -socks5 - -Give only one per line. This subsection is mandatory. - - - -A list of features that MUST be present in the client/library for this test to -be able to run. If a required feature is not present then the test will be -SKIPPED. - -Alternatively a feature can be prefixed with an exclamation mark to indicate a -feature is NOT required. If the feature is present then the test will be -SKIPPED. - -Features testable here are: - -alt-svc -crypto -debug -getrlimit -GnuTLS -GSS-API -http/2 -idn -ipv6 -Kerberos -large_file -ld_preload -libz -manual -Metalink -NSS -NTLM -OpenSSL -PSL -socks -SPNEGO -SSL -SSLpinning -SSPI -threaded-resolver -TLS-SRP -TrackMemory -unittest -unix-sockets -win32 -WinSSL - -as well as each protocol that curl supports. A protocol only needs to be -specified if it is different from the server (useful when the server -is 'none'). - - - -Using the same syntax as in but when mentioned here these servers -are explicitly KILLED when this test case is completed. Only use this if there -is no other alternatives. Using this of course requires subsequent tests to -restart servers. - - - -A command line that if set gets run by the test script before the test. If an -output is displayed by the command or if the return code is non-zero, the test -will be skipped and the (single-line) output will be displayed as reason for -not running the test. Variables are substituted as in the section. - - - -A command line that if set gets run by the test script after the test. If -the command exists with a non-zero status code, the test will be considered -to have failed. Variables are substituted as in the section. - - - -Name of tool to use instead of "curl". This tool must be built and exist -either in the libtest/ directory (if the tool starts with 'lib') or in the -unit/ directory (if the tool starts with 'unit'). - - - -test case description - - - -variable1=contents1 -variable2=contents2 - -Set the given environment variables to the specified value before the actual -command is run. They are cleared again after the command has been run. -Variables are first substituted as in the section. - - - -command line to run, there's a bunch of %variables that get replaced -accordingly. - -Note that the URL that gets passed to the server actually controls what data -that is returned. The last slash in the URL must be followed by a number. That -number (N) will be used by the test-server to load test case N and return the -data that is defined within the section. - -If there's no test number found above, the HTTP test server will use the -number following the last dot in the given hostname (made so that a CONNECT -can still pass on test number) so that "foo.bar.123" gets treated as test case -123. Alternatively, if an IPv6 address is provided to CONNECT, the last -hexadecimal group in the address will be used as the test number! For example -the address "[1234::ff]" would be treated as test case 255. - -Set type="perl" to write the test case as a perl script. It implies that -there's no memory debugging and valgrind gets shut off for this test. - -Set option="no-output" to prevent the test script to slap on the --output -argument that directs the output to a file. The --output is also not added if -the verify/stdout section is used. - -Set option="force-output" to make use of --output even when the test is -otherwise written to verify stdout. - -Set option="no-include" to prevent the test script to slap on the --include -argument. - -Set option="binary-trace" to use --trace instead of --trace-ascii for tracing. -Suitable for binary-oriented protocols such as MQTT. - -Set timeout="secs" to override default server logs advisor read lock timeout. -This timeout is used by the test harness, once that the command has completed -execution, to wait for the test server to write out server side log files and -remove the lock that advised not to read them. The "secs" parameter is the not -negative integer number of seconds for the timeout. This 'timeout' attribute -is documented for completeness sake, but is deep test harness stuff and only -needed for very singular and specific test cases. Avoid using it. - -Set delay="secs" to introduce a time delay once that the command has completed -execution and before the section runs. The "secs" parameter is the -not negative integer number of seconds for the delay. This 'delay' attribute -is intended for very specific test cases, and normally not needed. - -Available substitute variables include: -%CLIENT6IP - IPv6 address of the client running curl -%CLIENTIP - IPv4 address of the client running curl -%CURL - Path to the curl executable -%FTP2PORT - Port number of the FTP server 2 -%FTP6PORT - IPv6 port number of the FTP server -%FTPPORT - Port number of the FTP server -%FTPSPORT - Port number of the FTPS server -%FTPTIME2 - Timeout in seconds that should be just sufficient to receive - a response from the test FTP server -%FTPTIME3 - Even longer than %FTPTIME2 -%GOPHER6PORT - IPv6 port number of the Gopher server -%GOPHERPORT - Port number of the Gopher server -%HOST6IP - IPv6 address of the host running this test -%HOSTIP - IPv4 address of the host running this test -%HTTP6PORT - IPv6 port number of the HTTP server -%HTTPUNIXPATH - Path to the Unix socket of the HTTP server -%HTTPPORT - Port number of the HTTP server -%HTTPSPORT - Port number of the HTTPS server -%HTTPTLS6PORT - IPv6 port number of the HTTP TLS server -%HTTPTLSPORT - Port number of the HTTP TLS server -%IMAP6PORT - IPv6 port number of the IMAP server -%IMAPPORT - Port number of the IMAP server -%POP36PORT - IPv6 port number of the POP3 server -%POP3PORT - Port number of the POP3 server -%PROXYPORT - Port number of the HTTP proxy -%PWD - Current directory -%POSIX_PWD - Current directory somewhat mingw friendly -%FILE_PWD - Current directory, on windows prefixed with a slash -%RTSP6PORT - IPv6 port number of the RTSP server -%RTSPPORT - Port number of the RTSP server -%SSHSRVMD5 - MD5 of SSH server's public key -%SMTP6PORT - IPv6 port number of the SMTP server -%SMTPPORT - Port number of the SMTP server -%SOCKSPORT - Port number of the SOCKS4/5 server -%SRCDIR - Full path to the source dir -%SSHPORT - Port number of the SCP/SFTP server -%TFTP6PORT - IPv6 port number of the TFTP server -%TFTPPORT - Port number of the TFTP server -%USER - Login ID of the user running the test - - - -This creates the named file with this content before the test case is run, -which is useful if the test case needs a file to act on. -Variables are substituted on the contents of the file as in the -section. - - - -Pass this given data on stdin to the tool. - -If 'nonewline' is set, we will cut off the trailing newline of this given data -before comparing with the one actually received by the client - - - - - - -numerical error code curl is supposed to return. Specify a list of accepted -error codes by separating multiple numbers with comma. See test 237 for an -example. - - -One regex per line that is removed from the protocol dumps before the -comparison is made. This is very useful to remove dependencies on dynamically -changing protocol data such as port numbers or user-agent strings. - - -One perl op per line that operates on the protocol dump. This is pretty -advanced. Example: "s/^EPRT .*/EPRT stripped/" - - - - -the protocol dump curl should transmit, if 'nonewline' is set, we will cut off -the trailing newline of this given data before comparing with the one actually -sent by the client Variables are substituted as in the section. The - and rules are applied before comparisons are made. - - - - - -The protocol dump curl should transmit to a HTTP proxy (when the http-proxy -server is used), if 'nonewline' is set, we will cut off the trailing newline -of this given data before comparing with the one actually sent by the client -Variables are substituted as in the section. The and - rules are applied before comparisons are made. - - - - -This verifies that this data was passed to stdout. Variables are -substituted as in the section. - -Use the mode="text" attribute if the output is in text mode on platforms that -have a text/binary difference. - -If 'nonewline' is set, we will cut off the trailing newline of this given data -before comparing with the one actually received by the client - - -The file's contents must be identical to this after the test is complete. -Use the mode="text" attribute if the output is in text mode on platforms that -have a text/binary difference. -Variables are substituted as in the section. - - -1 to 4 can be appended to 'file' to compare more files. - - - - - - - - -One perl op per line that operates on the output file or stdout before being -compared with what is stored in the test file. This is pretty -advanced. Example: "s/^EPRT .*/EPRT stripped/" - - -1 to 4 can be appended to 'stripfile' to strip the corresponding -content - - - - - - - - -the contents of the upload data curl should have sent - - -disable - disables the valgrind log check for this test - - - - diff --git a/tests/FILEFORMAT.md b/tests/FILEFORMAT.md new file mode 100644 index 000000000..d01f3f17f --- /dev/null +++ b/tests/FILEFORMAT.md @@ -0,0 +1,468 @@ +# curl test suite file format + +The curl test suite's file format is very simple and extensible, closely +resembling XML. All data for a single test case resides in a single ASCII +file. Labels mark the beginning and the end of all sections, and each label +must be written in its own line. Comments are either XML-style (enclosed with +``) or shell script style (beginning with `#`) and must appear +on their own lines and not alongside actual test data. Most test data files +are syntactically valid XML, although a few files are not (lack of support for +character entities and the preservation of CR/LF characters at the end of +lines are the biggest differences). + +Each test case exists as a file matching the format `tests/data/testNUM`, +where NUM is considered the unique test number. + +The file begins with a 'testcase' tag, which encompasses the remainder of the +file. + +# `` + +Each test is always within the testcase tag. Each test case is split up in +four main sections: `info`, `reply`, `client` and `verify`. + +- **info** provides information about the test case + +- **reply** is used for the server to know what to send as a reply for the +requests curl sends + +- **client** defines how the client should behave + +- **verify** defines how to verify that the data stored after a command has +been run ended up correctly + +Each main section has a number of available subsections that can be specified, +that will be checked/used if specified. + +## `` + +### `` +A newline-separated list of keywords describing what this test case uses and +tests. Try to use an already used keyword. These keywords will be used for +statistical/informational purposes and for choosing or skipping classes +of tests. "Keywords" must begin with an alphabetic character, "-", "[" +or "{" and may actually consist of multiple words separated by spaces +which are treated together as a single identifier. + +## `` + +### `` + +data to be sent to the client on its request and later verified that it +arrived safely. Set `nocheck="yes"` to prevent the test script from verifying +the arrival of this data. + +If the data contains `swsclose` anywhere within the start and end tag, and +this is a HTTP test, then the connection will be closed by the server after +this response is sent. If not, the connection will be kept persistent. + +If the data contains `swsbounce` anywhere within the start and end tag, the +HTTP server will detect if this is a second request using the same test and +part number and will then increase the part number with one. This is useful +for auth tests and similar. + +`sendzero=yes` means that the (FTP) server will "send" the data even if the +size is zero bytes. Used to verify curl's behaviour on zero bytes transfers. + +`base64=yes` means that the data provided in the test-file is a chunk of data +encoded with base64. It is the only way a test case can contain binary +data. (This attribute can in fact be used on any section, but it doesn't make +much sense for other sections than "data"). + +`hex=yes` means that the data is a sequence of hex pairs. It will get decoded +and used as "raw" data. + +For FTP file listings, the `` section will be used *only* if you make +sure that there has been a CWD done first to a directory named `test-[num]` +where [num] is the test case number. Otherwise the ftp server can't know from +which test file to load the list content. + +### `` + +Send back this contents instead of the one. The num is set by: + + - The test number in the request line is >10000 and this is the remainder + of [test case number]%10000. + - The request was HTTP and included digest details, which adds 1000 to NUM + - If a HTTP request is NTLM type-1, it adds 1001 to num + - If a HTTP request is NTLM type-3, it adds 1002 to num + - If a HTTP request is Basic and num is already >=1000, it adds 1 to num + - If a HTTP request is Negotiate, num gets incremented by one for each + request with Negotiate authorization header on the same test case. + +Dynamically changing num in this way allows the test harness to be used to +test authentication negotiation where several different requests must be sent +to complete a transfer. The response to each request is found in its own data +section. Validating the entire negotiation sequence can be done by specifying +a datacheck section. + +### `` +The connect section is used instead of the 'data' for all CONNECT +requests. The remainder of the rules for the data section then apply but with +a connect prefix. + +### `` +if the data is sent but this is what should be checked afterwards. If +`nonewline=yes` is set, runtests will cut off the trailing newline from the +data before comparing with the one actually received by the client. + +Use the `mode="text"` attribute if the output is in text mode on platforms +that have a text/binary difference. + +### `` +The contents of numbered datacheck sections are appended to the non-numbered +one. + +### `` +number to return on a ftp SIZE command (set to -1 to make this command fail) + +### `` +what to send back if the client sends a (FTP) MDTM command, set to -1 to +have it return that the file doesn't exist + +### `` +special purpose server-command to control its behavior *after* the +reply is sent +For HTTP/HTTPS, these are supported: + +`wait [secs]` - Pause for the given time + +### `` +Special-commands for the server. + +#### For FTP/SMTP/POP/IMAP + +- `REPLY [command] [return value] [response string]` - Changes how the server + responds to the [command]. [response string] is evaluated as a perl string, + so it can contain embedded \r\n, for example. There's a special [command] + named "welcome" (without quotes) which is the string sent immediately on + connect as a welcome. +- `REPLYLF` (like above but sends the response terminated with LF-only and not + CRLF) +- `COUNT [command] [num]` - Do the `REPLY` change for `[command]` only `[num]` + times and then go back to the built-in approach +- `DELAY [command] [secs]` - Delay responding to this command for the given + time +- `RETRWEIRDO` - Enable the "weirdo" RETR case when multiple response lines + appear at once when a file is transferred +- `RETRNOSIZE` - Make sure the RETR response doesn't contain the size of the + file +- `NOSAVE` - Don't actually save what is received +- `SLOWDOWN` - Send FTP responses with 0.01 sec delay between each byte +- `PASVBADIP` - makes PASV send back an illegal IP in its 227 response +- `CAPA [capabilities]` - Enables support for and specifies a list of space + separated capabilities to return to the client for the IMAP `CAPABILITY`, + POP3 `CAPA` and SMTP `EHLO` commands +- `AUTH [mechanisms]` - Enables support for SASL authentication and specifies + a list of space separated mechanisms for IMAP, POP3 and SMTP + +#### For HTTP/HTTPS + +- `auth_required` if this is set and a POST/PUT is made without auth, the + server will NOT wait for the full request body to get sent +- `idle` - do nothing after receiving the request, just "sit idle" +- `stream` - continuously send data to the client, never-ending +- `writedelay: [secs]` delay this amount between reply packets +- `skip: [num]` - instructs the server to ignore reading this many bytes from + a PUT or POST request +- `rtp: part [num] channel [num] size [num]` - stream a fake RTP packet for + the given part on a chosen channel with the given payload size +- `connection-monitor` - When used, this will log `[DISCONNECT]` to the + `server.input` log when the connection is disconnected. +- `upgrade` - when an HTTP upgrade header is found, the server will upgrade to + http2 +- `swsclose` - instruct server to close connection after response +- `no-expect` - don't read the request body if Expect: is present + +#### For TFTP +`writedelay: [secs]` delay this amount between reply packets (each packet + being 512 bytes payload) + +## `` + +### `` +What server(s) this test case requires/uses. Available servers: + +- `file` +- `ftp-ipv6` +- `ftp` +- `ftps` +- `http-ipv6` +- `http-proxy` +- `http-unix` +- `http/2` +- `http` +- `https` +- `httptls+srp-ipv6` +- `httptls+srp` +- `imap` +- `mqtt` +- `none` +- `pop3` +- `rtsp-ipv6` +- `rtsp` +- `scp` +- `sftp` +- `smtp` +- `socks4` +- `socks5` + +Give only one per line. This subsection is mandatory. + +### `` +A list of features that MUST be present in the client/library for this test to +be able to run. If a required feature is not present then the test will be +SKIPPED. + +Alternatively a feature can be prefixed with an exclamation mark to indicate a +feature is NOT required. If the feature is present then the test will be +SKIPPED. + +Features testable here are: + +- `alt-svc` +- `crypto` +- `debug` +- `getrlimit` +- `GnuTLS` +- `GSS-API` +- `http/2` +- `idn` +- `ipv6` +- `Kerberos` +- `large_file` +- `ld_preload` +- `libz` +- `manual` +- `Metalink` +- `NSS` +- `NTLM` +- `OpenSSL` +- `PSL` +- `socks` +- `SPNEGO` +- `SSL` +- `SSLpinning` +- `SSPI` +- `threaded-resolver` +- `TLS-SRP` +- `TrackMemory` +- `unittest` +- `unix-sockets` +- `win32` +- `WinSSL` + +as well as each protocol that curl supports. A protocol only needs to be +specified if it is different from the server (useful when the server +is `none`). + +### `` +Using the same syntax as in `` but when mentioned here these servers +are explicitly KILLED when this test case is completed. Only use this if there +is no other alternatives. Using this of course requires subsequent tests to +restart servers. + +### `` +A command line that if set gets run by the test script before the test. If an +output is displayed by the command or if the return code is non-zero, the test +will be skipped and the (single-line) output will be displayed as reason for +not running the test. Variables are substituted as in the `` + section. + +### `` +A command line that if set gets run by the test script after the test. If +the command exists with a non-zero status code, the test will be considered +to have failed. Variables are substituted as in the `` section. + +### `` +Name of tool to invoke instead of "curl". This tool must be built and exist +either in the libtest/ directory (if the tool name starts with 'lib') or in +the unit/ directory (if the tool name starts with 'unit'). + +### `` +Brief test case description, shown when the test runs. + +### `` + variable1=contents1 + variable2=contents2 + +Set the given environment variables to the specified value before the actual +command is run. They are cleared again after the command has been run. +Variables are first substituted as in the `` section. +### `` +Command line to run. There's a bunch of %variables that get replaced +accordingly. + +Note that the URL that gets passed to the server actually controls what data +that is returned. The last slash in the URL must be followed by a number. That +number (N) will be used by the test-server to load test case N and return the +data that is defined within the `` section. + +If there's no test number found above, the HTTP test server will use the +number following the last dot in the given hostname (made so that a CONNECT +can still pass on test number) so that "foo.bar.123" gets treated as test case +123. Alternatively, if an IPv6 address is provided to CONNECT, the last +hexadecimal group in the address will be used as the test number! For example +the address "[1234::ff]" would be treated as test case 255. + +Set `type="perl"` to write the test case as a perl script. It implies that +there's no memory debugging and valgrind gets shut off for this test. + +Set `option="no-output"` to prevent the test script to slap on the `--output` +argument that directs the output to a file. The `--output` is also not added +if the verify/stdout section is used. + +Set `option="force-output"` to make use of `--output` even when the test is +otherwise written to verify stdout. + +Set `option="no-include"` to prevent the test script to slap on the +`--include` argument. + +Set `option="binary-trace"` to use `--trace` instead of `--trace-ascii` for +tracing. Suitable for binary-oriented protocols such as MQTT. + +Set `timeout="secs"` to override default server logs advisor read lock +timeout. This timeout is used by the test harness, once that the command has +completed execution, to wait for the test server to write out server side log +files and remove the lock that advised not to read them. The "secs" parameter +is the not negative integer number of seconds for the timeout. This `timeout` +attribute is documented for completeness sake, but is deep test harness stuff +and only needed for very singular and specific test cases. Avoid using it. + +Set `delay="secs"` to introduce a time delay once that the command has +completed execution and before the `` section runs. The "secs" +parameter is the not negative integer number of seconds for the delay. This +'delay' attribute is intended for very specific test cases, and normally not +needed. + +Available substitute variables include: + +- `%CLIENT6IP` - IPv6 address of the client running curl +- `%CLIENTIP` - IPv4 address of the client running curl +- `%CURL` - Path to the curl executable +- `%FILE_PWD` - Current directory, on windows prefixed with a slash +- `%FTP2PORT` - Port number of the FTP server 2 +- `%FTP6PORT` - IPv6 port number of the FTP server +- `%FTPPORT` - Port number of the FTP server +- `%FTPSPORT` - Port number of the FTPS server +- `%FTPTIME2` - Timeout in seconds that should be just sufficient to receive a response from the test FTP server +- `%FTPTIME3` - Even longer than %FTPTIME2 +- `%GOPHER6PORT` - IPv6 port number of the Gopher server +- `%GOPHERPORT` - Port number of the Gopher server +- `%HOST6IP` - IPv6 address of the host running this test +- `%HOSTIP` - IPv4 address of the host running this test +- `%HTTP6PORT` - IPv6 port number of the HTTP server +- `%HTTPPORT` - Port number of the HTTP server +- `%HTTPSPORT` - Port number of the HTTPS server +- `%HTTPTLS6PORT` - IPv6 port number of the HTTP TLS server +- `%HTTPTLSPORT` - Port number of the HTTP TLS server +- `%HTTPUNIXPATH` - Path to the Unix socket of the HTTP server +- `%IMAP6PORT` - IPv6 port number of the IMAP server +- `%IMAPPORT` - Port number of the IMAP server +- `%MQTTPORT` - Port number of the MQTT server +- `%NEGTELNETPORT` - Port number of the telnet server +- `%POP36PORT` - IPv6 port number of the POP3 server +- `%POP3PORT` - Port number of the POP3 server +- `%POSIX_PWD` - Current directory somewhat mingw friendly +- `%PROXYPORT` - Port number of the HTTP proxy +- `%PWD` - Current directory +- `%RTSP6PORT` - IPv6 port number of the RTSP server +- `%RTSPPORT` - Port number of the RTSP server +- `%SMBPORT` - Port number of the SMB server +- `%SMBSPORT` - Port number of the SMBS server +- `%SMTP6PORT` - IPv6 port number of the SMTP server +- `%SMTPPORT` - Port number of the SMTP server +- `%SOCKSPORT` - Port number of the SOCKS4/5 server +- `%SRCDIR` - Full path to the source dir +- `%SSHPORT` - Port number of the SCP/SFTP server +- `%SSHSRVMD5` - MD5 of SSH server's public key +- `%TFTP6PORT` - IPv6 port number of the TFTP server +- `%TFTPPORT` - Port number of the TFTP server +- `%USER` - Login ID of the user running the test + +### `` +This creates the named file with this content before the test case is run, +which is useful if the test case needs a file to act on. Variables are +substituted on the contents of the file as in the `` section. + +### `` +Pass this given data on stdin to the tool. + +If 'nonewline' is set, we will cut off the trailing newline of this given data +before comparing with the one actually received by the client + +## `` +### `` +numerical error code curl is supposed to return. Specify a list of accepted +error codes by separating multiple numbers with comma. See test 237 for an +example. + +### `` +One regex per line that is removed from the protocol dumps before the +comparison is made. This is very useful to remove dependencies on dynamically +changing protocol data such as port numbers or user-agent strings. + +### `` +One perl op per line that operates on the protocol dump. This is pretty +advanced. Example: `s/^EPRT .*/EPRT stripped/`. + +### `` + +the protocol dump curl should transmit, if 'nonewline' is set, we will cut off +the trailing newline of this given data before comparing with the one actually +sent by the client Variables are substituted as in the `` section. +The `` and `` rules are applied before comparisons are made. + +### `` + +The protocol dump curl should transmit to a HTTP proxy (when the http-proxy +server is used), if 'nonewline' is set, we will cut off the trailing newline +of this given data before comparing with the one actually sent by the client +Variables are substituted as in the `` section. The `` and +`` rules are applied before comparisons are made. + +### `` +This verifies that this data was passed to stdout. Variables are +substituted as in the `` section. + +Use the mode="text" attribute if the output is in text mode on platforms that +have a text/binary difference. + +If 'nonewline' is set, we will cut off the trailing newline of this given data +before comparing with the one actually received by the client + +### `` +The file's contents must be identical to this after the test is complete. Use +the mode="text" attribute if the output is in text mode on platforms that have +a text/binary difference. Variables are substituted as in the `` +section. + +### `` +1 to 4 can be appended to 'file' to compare more files. + +### `` + +### `` + +### `` + +### `` +One perl op per line that operates on the output file or stdout before being +compared with what is stored in the test file. This is pretty +advanced. Example: "s/^EPRT .*/EPRT stripped/" + +### `` +1 to 4 can be appended to 'stripfile' to strip the corresponding +content + +### `` + +### `` + +### `` + +### `` +the contents of the upload data curl should have sent + +### `` +disable - disables the valgrind log check for this test diff --git a/tests/Makefile.am b/tests/Makefile.am index c7b465d9a..cea09d146 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -25,7 +25,7 @@ PDFPAGES = testcurl.pdf runtests.pdf MANDISTPAGES = runtests.1.dist testcurl.1.dist EXTRA_DIST = ftpserver.pl httpserver.pl secureserver.pl runtests.pl \ - getpart.pm FILEFORMAT README stunnel.pem memanalyze.pl testcurl.pl \ + getpart.pm FILEFORMAT.md README stunnel.pem memanalyze.pl testcurl.pl \ valgrind.pm ftp.pm sshserver.pl sshhelp.pm pathhelp.pm testcurl.1 runtests.1 \ serverhelp.pm tftpserver.pl rtspserver.pl directories.pm symbol-scan.pl \ CMakeLists.txt mem-include-scan.pl valgrind.supp extern-scan.pl \ diff --git a/tests/README b/tests/README index 7f50d1cd1..209887dfc 100644 --- a/tests/README +++ b/tests/README @@ -72,35 +72,15 @@ The curl Test Suite 1.2 Port numbers used by test servers - - TCP/8990 for HTTP - - TCP/8991 for HTTPS - - TCP/8992 for FTP - - TCP/8993 for FTPS - - TCP/8994 for HTTP IPv6 - - TCP/8995 for FTP (2) - - TCP/8996 for FTP IPv6 - - UDP/8997 for TFTP - - UDP/8998 for TFTP IPv6 - - TCP/8999 for SCP/SFTP - - TCP/9000 for SOCKS - - TCP/9001 for POP3 - - TCP/9002 for POP3 IPv6 - - TCP/9003 for IMAP - - TCP/9004 for IMAP IPv6 - - TCP/9005 for SMTP - - TCP/9006 for SMTP IPv6 - - TCP/9007 for RTSP - - TCP/9008 for RTSP IPv6 - - TCP/9009 for GOPHER - - TCP/9010 for GOPHER IPv6 - - TCP/9011 for HTTPS server with TLS-SRP support - - TCP/9012 for HTTPS IPv6 server with TLS-SRP support - - TCP/9013 for HTTP proxy server for CONNECT - - TCP/9014 for HTTP/2 server - - TCP/9015 for DICT server - - TCP/9016 for SMB server - - TCP/9017 for SMBS server (reserved) - - TCP/9018 for TELNET server with negotiation support + Tests are written to use as few fixed fixed port numbers as possible and all + tests should be written to use suitable variables instead of port numbers so + that test cases continue to work independent on what port numbers the test + servers actually use. + + The remaining fixed-port test servers that are still used, use the port + range 8890 - 8904 by default, but can be moved with runtests' -b option. + + See the FILEFORMAT for a listing of existing port number variables. 1.3 Test servers -- cgit v1.2.1