/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * * Data structure definitions for verified boot, for on-disk / in-eeprom * data. */ #ifndef VBOOT_REFERENCE_VBOOT_2STRUCT_H_ #define VBOOT_REFERENCE_VBOOT_2STRUCT_H_ #include #include "2crypto.h" /* * Key block flags. * *The following flags set where the key is valid. Not used by firmware * verification; only kernel verification. */ #define VB2_KEY_BLOCK_FLAG_DEVELOPER_0 0x01 /* Developer switch off */ #define VB2_KEY_BLOCK_FLAG_DEVELOPER_1 0x02 /* Developer switch on */ #define VB2_KEY_BLOCK_FLAG_RECOVERY_0 0x04 /* Not recovery mode */ #define VB2_KEY_BLOCK_FLAG_RECOVERY_1 0x08 /* Recovery mode */ #define VB2_GBB_HWID_DIGEST_SIZE 32 /****************************************************************************/ /* Flags for vb2_shared_data.flags */ enum vb2_shared_data_flags { /* User has explicitly and physically requested recovery */ VB2_SD_FLAG_MANUAL_RECOVERY = (1 << 0), /* Developer mode is enabled */ VB2_SD_DEV_MODE_ENABLED = (1 << 1), /* * TODO: might be nice to add flags for why dev mode is enabled - via * gbb, virtual dev switch, or forced on for testing. */ }; /* Flags for vb2_shared_data.status */ enum vb2_shared_data_status { /* Reinitialized NV data due to invalid checksum */ VB2_SD_STATUS_NV_REINIT = (1 << 0), /* NV data has been initialized */ VB2_SD_STATUS_NV_INIT = (1 << 1), /* Secure data initialized */ VB2_SD_STATUS_SECDATA_INIT = (1 << 2), /* Chose a firmware slot */ VB2_SD_STATUS_CHOSE_SLOT = (1 << 3), /* Secure data kernel version space initialized */ VB2_SD_STATUS_SECDATAK_INIT = (1 << 4), }; /* * Data shared between vboot API calls. Stored at the start of the work * buffer. */ struct vb2_shared_data { /* Flags; see enum vb2_shared_data_flags */ uint32_t flags; /* Flags from GBB header */ uint32_t gbb_flags; /* * Reason we are in recovery mode this boot (enum vb2_nv_recovery), or * 0 if we aren't. */ uint32_t recovery_reason; /* Firmware slot used last boot (0=A, 1=B) */ uint32_t last_fw_slot; /* Result of last boot (enum vb2_fw_result) */ uint32_t last_fw_result; /* Firmware slot used this boot */ uint32_t fw_slot; /* * Version for this slot (top 16 bits = key, lower 16 bits = firmware). * * TODO: Make this a union to allow getting/setting those versions * separately? */ uint32_t fw_version; /* Version stored in secdata (must be <= fw_version to boot). */ uint32_t fw_version_secdata; /* * Status flags for this boot; see enum vb2_shared_data_status. Status * is "what we've done"; flags above are "decisions we've made". */ uint32_t status; /********************************************************************** * Temporary variables used during firmware verification. These don't * really need to persist through to the OS, but there's nowhere else * we can put them. */ /* Root key offset and size from GBB header */ uint32_t gbb_rootkey_offset; uint32_t gbb_rootkey_size; /* HWID digest from GBB header */ uint8_t gbb_hwid_digest[VB2_GBB_HWID_DIGEST_SIZE]; /* Offset of preamble from start of vblock */ uint32_t vblock_preamble_offset; /* * Offset and size of packed data key in work buffer. Size is 0 if * data key is not stored in the work buffer. */ uint32_t workbuf_data_key_offset; uint32_t workbuf_data_key_size; /* * Offset and size of firmware preamble in work buffer. Size is 0 if * preamble is not stored in the work buffer. */ uint32_t workbuf_preamble_offset; uint32_t workbuf_preamble_size; /* * Offset and size of hash context in work buffer. Size is 0 if * hash context is not stored in the work buffer. */ uint32_t workbuf_hash_offset; uint32_t workbuf_hash_size; /* * Current tag we're hashing * * For new structs, this is the offset of the vb2_signature struct * in the work buffer. * * TODO: rename to workbuf_hash_sig_offset when vboot1 structs are * deprecated. */ uint32_t hash_tag; /* Amount of data we still expect to hash */ uint32_t hash_remaining_size; } __attribute__((packed)); /****************************************************************************/ /* Signature at start of the GBB * Note that if you compile in the signature as is, you are likely to break any * tools that search for the signature. */ #define VB2_GBB_SIGNATURE "$GBB" #define VB2_GBB_SIGNATURE_SIZE 4 #define VB2_GBB_XOR_CHARS "****" /* TODO: can we write a macro to produce this at compile time? */ #define VB2_GBB_XOR_SIGNATURE { 0x0e, 0x6d, 0x68, 0x68 } /* VB2 GBB struct version */ #define VB2_GBB_MAJOR_VER 1 #define VB2_GBB_MINOR_VER 2 /* v1.2 - added fields for sha256 digest of the HWID */ /* Flags for vb2_gbb_header.flags */ enum vb2_gbb_flag { /* * Reduce the dev screen delay to 2 sec from 30 sec to speed up * factory. */ VB2_GBB_FLAG_DEV_SCREEN_SHORT_DELAY = (1 << 0), /* * BIOS should load option ROMs from arbitrary PCI devices. We'll never * enable this ourselves because it executes non-verified code, but if * a customer wants to void their warranty and set this flag in the * read-only flash, they should be able to do so. * * (TODO: Currently not supported. Mark as deprecated/unused?) */ VB2_GBB_FLAG_LOAD_OPTION_ROMS = (1 << 1), /* * The factory flow may need the BIOS to boot a non-ChromeOS kernel if * the dev-switch is on. This flag allows that. * * (TODO: Currently not supported. Mark as deprecated/unused?) */ VB2_GBB_FLAG_ENABLE_ALTERNATE_OS = (1 << 2), /* * Force dev switch on, regardless of physical/keyboard dev switch * position. */ VB2_GBB_FLAG_FORCE_DEV_SWITCH_ON = (1 << 3), /* Allow booting from USB in dev mode even if dev_boot_usb=0. */ VB2_GBB_FLAG_FORCE_DEV_BOOT_USB = (1 << 4), /* Disable firmware rollback protection. */ VB2_GBB_FLAG_DISABLE_FW_ROLLBACK_CHECK = (1 << 5), /* Allow Enter key to trigger dev->tonorm screen transition */ VB2_GBB_FLAG_ENTER_TRIGGERS_TONORM = (1 << 6), /* Allow booting Legacy OSes in dev mode even if dev_boot_legacy=0. */ VB2_GBB_FLAG_FORCE_DEV_BOOT_LEGACY = (1 << 7), /* Allow booting using alternate keys for FAFT servo testing */ VB2_GBB_FLAG_FAFT_KEY_OVERIDE = (1 << 8), /* Disable EC software sync */ VB2_GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC = (1 << 9), /* Default to booting legacy OS when dev screen times out */ VB2_GBB_FLAG_DEFAULT_DEV_BOOT_LEGACY = (1 << 10), /* Disable PD software sync */ VB2_GBB_FLAG_DISABLE_PD_SOFTWARE_SYNC = (1 << 11), /* * Allow full fastboot capability in firmware even if * dev_boot_fastboot_full_cap=0. */ VB2_GBB_FLAG_FORCE_DEV_BOOT_FASTBOOT_FULL_CAP = (1 << 13), }; struct vb2_gbb_header { /* Fields present in version 1.1 */ uint8_t signature[VB2_GBB_SIGNATURE_SIZE]; /* VB2_GBB_SIGNATURE */ uint16_t major_version; /* See VB2_GBB_MAJOR_VER */ uint16_t minor_version; /* See VB2_GBB_MINOR_VER */ uint32_t header_size; /* Size of GBB header in bytes */ uint32_t flags; /* Flags (see enum vb2_gbb_flag) */ /* Offsets (from start of header) and sizes (in bytes) of components */ uint32_t hwid_offset; /* HWID */ uint32_t hwid_size; uint32_t rootkey_offset; /* Root key */ uint32_t rootkey_size; uint32_t bmpfv_offset; /* BMP FV */ uint32_t bmpfv_size; uint32_t recovery_key_offset; /* Recovery key */ uint32_t recovery_key_size; /* Added in version 1.2 */ uint8_t hwid_digest[VB2_GBB_HWID_DIGEST_SIZE]; /* SHA-256 of HWID */ /* Pad to match EXPECETED_VB2_GBB_HEADER_SIZE. Initialize to 0. */ uint8_t pad[48]; } __attribute__((packed)); /* The GBB is used outside of vboot_reference, so this size is important. */ #define EXPECTED_VB2_GBB_HEADER_SIZE 128 #endif /* VBOOT_REFERENCE_VBOOT_2STRUCT_H_ */