/* Copyright 2022 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/ {
	chosen {
		intel-ap-pwrseq,espi = &espi0;
	};

	common-pwrseq {
		compatible = "intel,ap-pwrseq";

		sys-pwrok-delay = <3>;
		all-sys-pwrgd-timeout = <20>;
	};

	pwr-en-pp3300-s5 {
		compatible = "intel,ap-pwrseq-gpio";
		dbg-label = "PP1800_S5/PP3300_S5 enable output to LS";
		enum-name = "PWR_EN_PP3300_A";
		gpios = <&gpiob 6 GPIO_ACTIVE_HIGH>;
		output;
	};
	pwr-pg-ec-rsmrst-od {
		compatible = "intel,ap-pwrseq-gpio";
		dbg-label = "RSMRST power good from regulator";
		enum-name = "PWR_RSMRST";
		gpios = <&gpioe 2 GPIO_ACTIVE_HIGH>;
		interrupt-flags = <GPIO_INT_EDGE_BOTH>;
	};
	pwr-ec-pch-rsmrst-odl {
		compatible = "intel,ap-pwrseq-gpio";
		dbg-label = "RSMRST output to PCH";
		enum-name = "PWR_EC_PCH_RSMRST";
		gpios = <&gpioa 6 GPIO_ACTIVE_HIGH>;
		output;
	};
	pwr-pch-pwrok {
		compatible = "intel,ap-pwrseq-gpio";
		dbg-label = "PCH_PWROK output to PCH";
		enum-name = "PWR_PCH_PWROK";
		gpios = <&gpioa 5 GPIO_ACTIVE_HIGH>;
		output;
	};
	pwr-ec-pch-sys-pwrok {
		compatible = "intel,ap-pwrseq-gpio";
		dbg-label = "SYS_PWROK output to PCH";
		enum-name = "PWR_EC_PCH_SYS_PWROK";
		gpios = <&gpiob 0 GPIO_ACTIVE_HIGH>;
		output;
	};
	pwr-sys-rst-l {
		compatible = "intel,ap-pwrseq-gpio";
		dbg-label = "SYS_RESET# output to PCH";
		enum-name = "PWR_SYS_RST";
		gpios = <&gpioc 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
		output;
	};
	pwr-slp-s0-l {
		compatible = "intel,ap-pwrseq-gpio";
		dbg-label = "SLP_S0_L input from PCH";
		enum-name = "PWR_SLP_S0";
		gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
		interrupt-flags = <GPIO_INT_EDGE_BOTH>;
	};
	pwr-slp-s3-l {
		compatible = "intel,ap-pwrseq-vw";
		dbg-label = "SLP_S3_L input from PCH";
		enum-name = "PWR_SLP_S3";
		virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4";
		vw-invert;
/*
 * TODO: Initially, use virtual wire for sleep S3 signal instead of
 * of the GPIO signal which also exists.
 *		compatible = "intel,ap-pwrseq-gpio";
 *		gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
 *		interrupt-flags = <GPIO_INT_EDGE_BOTH>;
 */
	};
	pwr-slp-s4 {
		compatible = "intel,ap-pwrseq-vw";
		dbg-label = "SLP_S4 virtual wire input from PCH";
		enum-name = "PWR_SLP_S4";
		virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S4";
		vw-invert;
	};
	pwr-slp-s5 {
		compatible = "intel,ap-pwrseq-vw";
		dbg-label = "SLP_S5 virtual wire input from PCH";
		enum-name = "PWR_SLP_S5";
		virtual-wire = "ESPI_VWIRE_SIGNAL_SLP_S5";
		vw-invert;
	};
	pwr-all-sys-pwrgd {
		compatible = "intel,ap-pwrseq-gpio";
		dbg-label = "all power good";
		enum-name = "PWR_ALL_SYS_PWRGD";
		gpios = <&gpiof 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
		interrupt-flags = <GPIO_INT_EDGE_BOTH>;
	};
};

/*
 * Because the power signals directly reference the GPIOs,
 * the corresponding named-gpios need to have no-auto-init set.
 */
 /* pwr-en-pp3300-s5 */
&gpio_en_s5_rails {
	no-auto-init;
};

/* pwr-pg-ec-rsmrst-od */
&gpio_seq_ec_rsmrst_odl {
	no-auto-init;
};

/* pwr-ec-pch-rsmrst-odl */
&gpio_ec_soc_rsmrst_l {
	no-auto-init;
};

/* pwr-pch-pwrok */
&gpio_soc_pwrok {
	no-auto-init;
};

/* pwr-ec-pch-sys-pwrok */
&gpio_sys_pwrok {
	no-auto-init;
};

/* pwr-sys-rst-l */
&gpio_sys_rst_odl {
	no-auto-init;
};

/* pwr-slp-s0-l */
&gpio_sys_slp_s0ix_3v3_l {
	no-auto-init;
};

/* pwr-slp-s3-l */
&gpio_slp_s3_ls_l {
	no-auto-init;
};

/* pwr-all-sys-pwrgd */
&gpio_seq_ec_all_sys_pg_od {
	no-auto-init;
};