/* Copyright 2021 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include <dt-bindings/usb_pd_tcpm.h>

/*
 * Kingler and Steelix use the same dts, take care of this when modify it.
 */

/ {
	named-i2c-ports {
		compatible = "named-i2c-ports";

		i2c_sensor: sensor {
			i2c-port = <&i2c0_0>;
			enum-names = "I2C_PORT_SENSOR";
		};
		i2c_usb_c0: usb-c0 {
			i2c-port = <&i2c1_0>;
			remote-port = <7>;
			enum-names = "I2C_PORT_USB_C0";
		};
		i2c_usb_c1: usb-c1 {
			i2c-port = <&i2c2_0>;
			enum-names = "I2C_PORT_USB_C1",
				"I2C_PORT_USB_C1_TCPC",
				"I2C_PORT_USB_C1_PPC";
		};
		i2c_charger: charger {
			i2c-port = <&i2c3_0>;
			enum-names = "I2C_PORT_POWER",
				"I2C_PORT_EEPROM";
		};
		battery {
			i2c-port = <&i2c5_0>;
			remote-port = <1>;
			enum-names = "I2C_PORT_BATTERY",
				"I2C_PORT_VIRTUAL_BATTERY";
		};
	};
};

&i2c0_0 {
	label = "I2C_SENSOR";
	status = "okay";
	clock-frequency = <I2C_BITRATE_FAST>;
	pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>;
	pinctrl-names = "default";
};

&i2c_ctrl0 {
	status = "okay";
};

&i2c1_0 {
	label = "I2C_USB_C0";
	status = "okay";
	clock-frequency = <I2C_BITRATE_FAST_PLUS>;
	pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>;
	pinctrl-names = "default";

	bc12_port0: pi3usb9201@5f {
		compatible = "pericom,pi3usb9201";
		status = "okay";
		reg = <0x5f>;
		irq = <&int_usb_c0_bc12>;
	};

	tcpc_port0: anx7447-tcpc@2c {
		compatible = "analogix,anx7447-tcpc";
		status = "okay";
		reg = <0x2c>;
		tcpc-flags = <(
			TCPC_FLAGS_VBUS_MONITOR |
			TCPC_FLAGS_ALERT_OD |
			TCPC_FLAGS_CONTROL_VCONN |
			TCPC_FLAGS_CONTROL_FRS)>;
		/* a duplicate of the <&gpio_usb_c0_tcpc_int_odl> node in
		 * "named-gpios". This is the Zephyr preferred style,
		 * the "named-gpios" node will be dealt with at a later date.
		 */
		irq-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
		/* a duplicate of the <&gpio_usb_c0_tcpc_rst> node in
		 * "named-gpios". This is the Zephyr preferred style,
		 * the "named-gpios" node will be dealt with at a later date.
		 */
		rst-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>;
	};

	ppc_port0: nx20p348x@72 {
		compatible = "nxp,nx20p348x";
		status = "okay";
		reg = <0x72>;
	};
};

&i2c_ctrl1 {
	status = "okay";
};

&i2c2_0 {
	label = "I2C_USB_C1";
	status = "okay";
	clock-frequency = <I2C_BITRATE_FAST_PLUS>;
	pinctrl-0 = <&i2c2_0_sda_scl_gp91_92>;
	pinctrl-names = "default";

	bc12_port1: rt1718s-bc12@40 {
		compatible = "richtek,rt1718s-bc12";
		status = "okay";
		reg = <0x40>;
	};

	tcpc_port1: rt1718s-tcpc@40 {
		compatible = "richtek,rt1718s-tcpc";
		reg = <0x40>;
		tcpc-flags = <(
			TCPC_FLAGS_ALERT_OD |
			TCPC_FLAGS_CONTROL_VCONN |
			TCPC_FLAGS_CONTROL_FRS)>;
		/* a duplicate of the <&gpio_usb_c1_tcpc_int_odl> node in
		 * "named-gpios". This is the Zephyr preferred style,
		 * the "named-gpios" node will be dealt with at a later date.
		 */
		irq-gpios = <&gpioe 1 GPIO_ACTIVE_LOW>;
	};

	ppc_port1: nx20p348x@72 {
		compatible = "nxp,nx20p348x";
		status = "okay";
		reg = <0x72>;
	};

	ps8743_mux_1: ps8743-mux-1@10 {
		compatible = "parade,ps8743";
		reg = <0x10>;
		board-init = "ps8743_mux_1_board_init";
	};
};

&i2c_ctrl2 {
	status = "okay";
};

&i2c3_0 {
	label = "I2C_PWR_CBI";
	status = "okay";
	clock-frequency = <I2C_BITRATE_FAST>;
	pinctrl-0 = <&i2c3_0_sda_scl_gpd0_d1>;
	pinctrl-names = "default";

	charger: isl923x@9 {
		compatible = "intersil,isl923x";
		status = "okay";
		reg = <0x9>;
	};

	cbi_eeprom: eeprom@50 {
		compatible = "atmel,at24";
		reg = <0x50>;
		size = <2048>;
		pagesize = <16>;
		address-width = <8>;
		timeout = <5>;
	};
};

&i2c_ctrl3 {
	status = "okay";
};

&i2c5_0 {
	label = "I2C_BATTERY";
	status = "okay";
	clock-frequency = <I2C_BITRATE_STANDARD>;
	pinctrl-0 = <&i2c5_0_sda_scl_gp33_36>;
	pinctrl-names = "default";
};

&i2c_ctrl5 {
	status = "okay";
};