/* Copyright 2017 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* TI SN5S330 Type-C Power Path Controller */

#ifndef __CROS_EC_SN5S330_H
#define __CROS_EC_SN5S330_H

#include "common.h"
#include "driver/ppc/sn5s330_public.h"

struct sn5s330_config {
	uint8_t i2c_port;
	uint8_t i2c_addr_flags;
};

extern const struct sn5s330_config sn5s330_chips[];
extern const unsigned int sn5s330_cnt;

/* Power Path Indices */
enum sn5s330_pp_idx {
	SN5S330_PP1,
	SN5S330_PP2,
	SN5S330_PP_COUNT,
};

#define SN5S330_FUNC_SET1 0x50
#define SN5S330_FUNC_SET2 0x51
#define SN5S330_FUNC_SET3 0x52
#define SN5S330_FUNC_SET4 0x53
#define SN5S330_FUNC_SET5 0x54
#define SN5S330_FUNC_SET6 0x55
#define SN5S330_FUNC_SET7 0x56
#define SN5S330_FUNC_SET8 0x57
#define SN5S330_FUNC_SET9 0x58
#define SN5S330_FUNC_SET10 0x59
#define SN5S330_FUNC_SET11 0x5A
#define SN5S330_FUNC_SET12 0x5B

#define SN5S330_INT_STATUS_REG1 0x2F
#define SN5S330_INT_STATUS_REG2 0x30
#define SN5S330_INT_STATUS_REG3 0x31
/*
 * TODO(b:205754232): Register name discrepancy
 */
#define SN5S330_INT_STATUS_REG4 0x32

#define SN5S330_INT_TRIP_RISE_REG1 0x20
#define SN5S330_INT_TRIP_RISE_REG2 0x21
#define SN5S330_INT_TRIP_RISE_REG3 0x22
#define SN5S330_INT_TRIP_FALL_REG1 0x23
#define SN5S330_INT_TRIP_FALL_REG2 0x24
#define SN5S330_INT_TRIP_FALL_REG3 0x25

#define SN5S330_INT_MASK_RISE_REG1 0x26
#define SN5S330_INT_MASK_RISE_REG2 0x27
#define SN5S330_INT_MASK_RISE_REG3 0x28
#define SN5S330_INT_MASK_FALL_REG1 0x29
#define SN5S330_INT_MASK_FALL_REG2 0x2A
#define SN5S330_INT_MASK_FALL_REG3 0x2B

#define PPX_ILIM_DEGLITCH_0_US_20 0x1
#define PPX_ILIM_DEGLITCH_0_US_50 0x2
#define PPX_ILIM_DEGLITCH_0_US_100 0x3
#define PPX_ILIM_DEGLITCH_0_US_200 0x4
#define PPX_ILIM_DEGLITCH_0_US_1000 0x5
#define PPX_ILIM_DEGLITCH_0_US_2000 0x6
#define PPX_ILIM_DEGLITCH_0_US_10000 0x7

/* Internal VBUS Switch Current Limit Settings (min) */
#define SN5S330_ILIM_0_35 0
#define SN5S330_ILIM_0_63 1
#define SN5S330_ILIM_0_90 2
#define SN5S330_ILIM_1_14 3
#define SN5S330_ILIM_1_38 4
#define SN5S330_ILIM_1_62 5
#define SN5S330_ILIM_1_86 6
#define SN5S330_ILIM_2_10 7
#define SN5S330_ILIM_2_34 8
#define SN5S330_ILIM_2_58 9
#define SN5S330_ILIM_2_82 10
#define SN5S330_ILIM_3_06 11
#define SN5S330_ILIM_3_30 12

/* FUNC_SET_2 */
#define SN5S330_SBU_EN BIT(4)

/* FUNC_SET_3 */
#define SN5S330_PP1_EN BIT(0)
#define SN5S330_PP2_EN BIT(1)
#define SN5S330_VBUS_DISCH_EN BIT(2)
#define SN5S330_SET_RCP_MODE_PP1 BIT(5)
#define SN5S330_SET_RCP_MODE_PP2 BIT(6)

/* FUNC_SET_4 */
#define SN5S330_VCONN_EN BIT(0)
#define SN5S330_CC_POLARITY BIT(1)
#define SN5S330_CC_EN BIT(4)
#define SN5S330_VCONN_ILIM_SEL BIT(5)

/* FUNC_SET_8 */
#define SN5S330_VCONN_DEGLITCH_MASK (3 << 6)
#define SN5S330_VCONN_DEGLITCH_63_US (0 << 6)
#define SN5S330_VCONN_DEGLITCH_125_US BIT(6)
#define SN5S330_VCONN_DEGLITCH_640_US (2 << 6)
#define SN5S330_VCONN_DEGLITCH_1280_US (3 << 6)

/* FUNC_SET_9 */
#define SN5S330_FORCE_OVP_EN_SBU BIT(1)
#define SN5S330_PP2_CONFIG BIT(2)
#define SN5S330_PWR_OVR_VBUS BIT(3)
#define SN5S330_OVP_EN_CC BIT(4)
#define SN5S330_CONFIG_UVP BIT(5)
#define SN5S330_FORCE_ON_VBUS_OVP BIT(6)
#define SN5S330_FORCE_ON_VBUS_UVP BIT(7)

/* INT_STATUS_REG3 */
#define SN5S330_VBUS_GOOD BIT(0)

/* INT_STATUS_REG4 */
#define SN5S330_DIG_RES BIT(0)
#define SN5S330_DB_BOOT BIT(1)
#define SN5S330_VSAFE0V_STAT BIT(2)
#define SN5S330_VSAFE0V_MASK BIT(3)

/* FUNC_SET_10 */
#define SN5S330_PP1_RCP_OFFSET BIT(4)

/*
 * INT_MASK_RISE/FALL_EDGE_1
 *
 * The ILIM_PP1 bit indicates an overcurrent condition when sourcing on power
 * path 1.  For rising edge registers, this indicates an overcurrent has
 * occured; similarly for falling edge, it means the overcurrent condition is no
 * longer present.
 */
#define SN5S330_ILIM_PP1_MASK BIT(4)

/*
 * INT_MASK_RISE/FALL_EDGE2
 *
 * The VCONN_ILIM bit indicates an overcurrent condition on VCONN.  By default,
 * VCONN will be latched off.
 */
#define SN5S330_VCONN_ILIM (1 << 1)

/*
 * INT_MASK_RISE/FALL_EDGE2
 *
 * The OV_CC1_CON/OV_CC2_CON bit indicates an over-voltage occurred on
 * C_CC1/C_CC2.
 */
#define SN5S330_CC1_CON (1 << 2)
#define SN5S330_CC2_CON (1 << 3)

/*
 * INT_MASK_RISE/FALL_EDGE_3
 *
 * The VBUS_GOOD bit indicates VBUS has increased beyond a 4.0V threshold.
 * For rising edge registers, this indicates VBUS has risen above 4.0V.
 * For falling edge registers, this indicates VBUS has fallen below 4.0V.
 */
#define SN5S330_VBUS_GOOD_MASK BIT(0)

#endif /* defined(__CROS_EC_SN5S330_H) */