/* Copyright 2016 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ /* Task scheduling / events module for Chrome EC operating system */ /* * Needed before headers to support test builds since minute-ia defines 5 * parameters instead of the normal 4. This specifies a flag value of 0 for all * tests tasks. */ #define TEST_TASK_EXTRA_ARGS 0 #include "atomic.h" #include "common.h" #include "console.h" #include "link_defs.h" #include "panic.h" #include "task.h" #include "timer.h" #include "util.h" #include "task_defs.h" #include "interrupts.h" #include "hpet.h" /* Console output macros */ #define CPUTS(outstr) cputs(CC_SYSTEM, outstr) #define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args) #define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args) /* Value to store in unused stack */ #define STACK_UNUSED_VALUE 0xdeadd00d /* declare task routine prototypes */ #define TASK(n, r, d, s, f) void r(void *); void __idle(void); CONFIG_TASK_LIST CONFIG_TEST_TASK_LIST #undef TASK /* This is set by interrupt handlers */ extern volatile uint32_t __in_isr; /* Task names for easier debugging */ #define TASK(n, r, d, s, f) #n, static const char * const task_names[] = { "<< idle >>", CONFIG_TASK_LIST CONFIG_TEST_TASK_LIST }; #undef TASK #ifdef CONFIG_TASK_PROFILING static uint64_t task_start_time; /* Time task scheduling started */ /* * We only keep 32-bit values for exception start/end time, to avoid * accounting errors when we service interrupt when the timer wraps around. */ static uint32_t exc_start_time; /* Time of task->exception transition */ static uint32_t exc_end_time; /* Time of exception->task transition */ static uint64_t exc_total_time; /* Total time in exceptions */ static uint32_t svc_calls; /* Number of service calls */ static uint32_t task_switches; /* Number of times active task changed */ static uint32_t irq_dist[CONFIG_IRQ_COUNT]; /* Distribution of IRQ calls */ #endif void __schedule(int desched, int resched); #ifndef CONFIG_LOW_POWER_IDLE /* Idle task. Executed when no tasks are ready to be scheduled. */ void __idle(void) { uint32_t idelay = 1000; while (1) { /* * Wait for the next irq event. This stops the CPU clock * (sleep / deep sleep, depending on chip config). * * Todo - implement sleep instead of delay */ udelay(idelay); } } #endif /* !CONFIG_LOW_POWER_IDLE */ static void task_exit_trap(void) { int i = task_get_current(); cprints(CC_TASK, "Task %d (%s) exited!", i, task_get_name(i)); /* Exited tasks simply sleep forever */ while (1) task_wait_event(-1); } /* Startup parameters for all tasks. */ #define TASK(n, r, d, s, f) { \ .r0 = (uint32_t)d, \ .pc = (uint32_t)r, \ .stack_size = s, \ .flags = f, \ }, static const struct { uint32_t r0; uint32_t pc; uint16_t stack_size; uint32_t flags; } tasks_init[] = { TASK(IDLE, __idle, 0, IDLE_TASK_STACK_SIZE, 0) CONFIG_TASK_LIST CONFIG_TEST_TASK_LIST }; #undef TASK /* Contexts for all tasks */ static task_ tasks[TASK_ID_COUNT]; /* Validity checks about static task invariants */ BUILD_ASSERT(TASK_ID_COUNT <= sizeof(unsigned) * 8); BUILD_ASSERT(TASK_ID_COUNT < (1 << (sizeof(task_id_t) * 8))); /* Stacks for all tasks */ #define TASK(n, r, d, s, f) + s uint8_t task_stacks[0 TASK(IDLE, __idle, 0, IDLE_TASK_STACK_SIZE, 0) CONFIG_TASK_LIST CONFIG_TEST_TASK_LIST ] __aligned(8); #undef TASK task_ *current_task, *next_task; /* * Bitmap of all tasks ready to be run. * * Start off with only the hooks task marked as ready such that all the modules * can do their init within a task switching context. The hooks task will then * make a call to enable all tasks. */ static uint32_t tasks_ready = BIT(TASK_ID_HOOKS); /* * Initially allow only the HOOKS and IDLE task to run, regardless of ready * status, in order for HOOK_INIT to complete before other tasks. * task_enable_all_tasks() will open the flood gates. */ static uint32_t tasks_enabled = BIT(TASK_ID_HOOKS) | BIT(TASK_ID_IDLE); static int start_called; /* Has task swapping started */ static inline task_ *__task_id_to_ptr(task_id_t id) { return tasks + id; } void interrupt_disable(void) { __asm__ __volatile__ ("cli"); } void interrupt_enable(void) { /* * allow enbling interrupt only after task switch is ready */ ASSERT(task_start_called() != 1); __asm__ __volatile__ ("sti"); } inline int is_interrupt_enabled(void) { uint32_t eflags = 0; __asm__ __volatile__ ("pushfl\n" "popl %0\n" : "=r"(eflags)); /* Check Interrupt Enable flag */ return !!(eflags & 0x200); } inline int in_interrupt_context(void) { return !!__in_isr; } task_id_t task_get_current(void) { /* If we haven't done a context switch then our task ID isn't valid */ if (IS_ENABLED(CONFIG_DEBUG_BRINGUP)) ASSERT(task_start_called() != 1); return current_task - tasks; } const char *task_get_name(task_id_t tskid) { if (tskid < ARRAY_SIZE(task_names)) return task_names[tskid]; return "<< unknown >>"; } uint32_t *task_get_event_bitmap(task_id_t tskid) { task_ *tsk = __task_id_to_ptr(tskid); return &tsk->events; } int task_start_called(void) { return start_called; } /** * Scheduling system call */ uint32_t switch_handler(int desched, task_id_t resched) { task_ *current, *next; current = current_task; if (IS_ENABLED(CONFIG_DEBUG_STACK_OVERFLOW) && *current->stack != STACK_UNUSED_VALUE) { panic_printf("\n\nStack overflow in %s task!\n", task_get_name(current - tasks)); if (IS_ENABLED(CONFIG_SOFTWARE_PANIC)) software_panic(PANIC_SW_STACK_OVERFLOW, current - tasks); } if (desched && !current->events) { /* * Remove our own ready bit (current - tasks is same as * task_get_current()) */ tasks_ready &= ~(1 << (current - tasks)); } tasks_ready |= 1 << resched; ASSERT(tasks_ready & tasks_enabled); next = __task_id_to_ptr(__fls(tasks_ready & tasks_enabled)); /* Only the first ISR on the (nested IRQ) stack calculates time */ if (IS_ENABLED(CONFIG_TASK_PROFILING) && __in_isr == 1) { /* Track time in interrupts */ uint32_t t = get_time().le.lo; exc_end_time = t; exc_total_time += (t - exc_start_time); } /* Nothing to do */ if (next == current) return 0; /* Switch to new task */ if (IS_ENABLED(CONFIG_TASK_PROFILING)) task_switches++; next_task = next; /* TS required */ return 1; } void __schedule(int desched, int resched) { __asm__ __volatile__("int %0" : : "i"(ISH_TS_VECTOR), "d"(desched), "c"(resched)); } #ifdef CONFIG_TASK_PROFILING void __keep task_start_irq_handler(void *data) { /* * Get time before checking depth, in case this handler is * pre-empted. */ uint32_t t = get_time().le.lo; int irq = (uint32_t)data; /* * Track IRQ distribution. No need for atomic add, because an IRQ * can't pre-empt itself. If less than 0, then the vector did not map * to an IRQ but was for a synchronous exception instead (TS_VECTOR) */ if (irq < CONFIG_IRQ_COUNT) irq_dist[irq]++; else /* Track total number of service calls */ atomic_add(&svc_calls, 1); /* Only the outer ISR should keep track of the ISR start time */ if (__in_isr == 1) { exc_start_time = t; /* * Bill the current task for time between the end of the last * interrupt and the start of this interrupt (now). */ current_task->runtime += (t - exc_end_time); } } #endif static uint32_t __wait_evt(int timeout_us, task_id_t resched) { task_ *tsk = current_task; task_id_t me = tsk - tasks; uint32_t evt; int ret __attribute__((unused)); ASSERT(!in_interrupt_context()); if (timeout_us > 0) { timestamp_t deadline = get_time(); deadline.val += timeout_us; ret = timer_arm(deadline, me); ASSERT(ret == EC_SUCCESS); } while (!(evt = atomic_clear(&tsk->events))) { /* Remove ourself and get the next task in the scheduler */ __schedule(1, resched); resched = TASK_ID_IDLE; } if (timeout_us > 0) { timer_cancel(me); /* Ensure timer event is clear, we no longer care about it */ atomic_clear_bits(&tsk->events, TASK_EVENT_TIMER); } return evt; } uint32_t task_set_event(task_id_t tskid, uint32_t event) { task_ *receiver = __task_id_to_ptr(tskid); if (tskid > TASK_ID_COUNT) { receiver = current_task; tskid = receiver - tasks; } else { receiver = __task_id_to_ptr(tskid); } ASSERT(receiver); /* Set the event bit in the receiver message bitmap */ atomic_or(&receiver->events, event); /* Re-schedule if priorities have changed */ if (in_interrupt_context()) { /* The receiver might run again */ atomic_or(&tasks_ready, 1 << tskid); } else { __schedule(0, tskid); } return 0; } uint32_t task_wait_event(int timeout_us) { return __wait_evt(timeout_us, TASK_ID_IDLE); } uint32_t task_wait_event_mask(uint32_t event_mask, int timeout_us) { uint64_t deadline = get_time().val + timeout_us; uint32_t events = 0; int time_remaining_us = timeout_us; /* Add the timer event to the mask so we can indicate a timeout */ event_mask |= TASK_EVENT_TIMER; while (!(events & event_mask)) { /* Collect events to re-post later */ events |= __wait_evt(time_remaining_us, TASK_ID_IDLE); time_remaining_us = deadline - get_time().val; if (timeout_us > 0 && time_remaining_us <= 0) { /* Ensure we return a TIMER event if we timeout */ events |= TASK_EVENT_TIMER; break; } } /* Re-post any other events collected */ if (events & ~event_mask) atomic_or(¤t_task->events, events & ~event_mask); return events & event_mask; } void task_enable_all_tasks(void) { /* Mark all tasks as ready and table to run. */ tasks_ready = tasks_enabled = BIT(TASK_ID_COUNT) - 1; /* Reschedule the highest priority task. */ __schedule(0, 0); } void task_enable_task(task_id_t tskid) { atomic_or(&tasks_enabled, BIT(tskid)); } void task_disable_task(task_id_t tskid) { atomic_clear_bits(&tasks_enabled, BIT(tskid)); if (!in_interrupt_context() && tskid == task_get_current()) __schedule(0, 0); } void task_enable_irq(int irq) { unmask_interrupt(irq); } void __keep task_disable_irq(int irq) { mask_interrupt(irq); } void task_clear_pending_irq(int irq) { } void task_trigger_irq(int irq) { /* ISR should not be called before the first task is scheduled */ if (!task_start_called()) return; /* we don't allow nested interrupt */ if (in_interrupt_context()) return; /* * "int" instruction accepts vector only as immediate value. * so here, we use one vector(SOFTIRQ_VECTOR) and pass * the address of ISR of irq in ecx register. */ __asm__ __volatile__("int %0\n" : : "i"(SOFTIRQ_VECTOR), "c"(irq)); } void mutex_lock(struct mutex *mtx) { uint32_t old_val = 0, value = 1; uint32_t id = 1 << task_get_current(); ASSERT(id != TASK_ID_INVALID); atomic_or(&mtx->waiters, id); do { old_val = 0; __asm__ __volatile__( ASM_LOCK_PREFIX "cmpxchg %1, %2\n" : "=a" (old_val) : "r" (value), "m" (mtx->lock), "a" (old_val) : "memory"); if (old_val != 0) { /* Contention on the mutex */ task_wait_event_mask(TASK_EVENT_MUTEX, 0); } } while (old_val); atomic_clear_bits(&mtx->waiters, id); } void mutex_unlock(struct mutex *mtx) { uint32_t waiters = 0; uint32_t old_val = 1, val = 0; task_ *tsk = current_task; __asm__ __volatile__( ASM_LOCK_PREFIX "cmpxchg %1, %2\n" : "=a" (old_val) : "r" (val), "m" (mtx->lock), "a" (old_val) : "memory"); if (old_val == 1) waiters = mtx->waiters; /* else? Does unlock fail - what to do then ? */ while (waiters) { task_id_t id = __fls(waiters); waiters &= ~BIT(id); /* Somebody is waiting on the mutex */ task_set_event(id, TASK_EVENT_MUTEX); } /* Ensure no event is remaining from mutex wake-up */ atomic_clear_bits(&tsk->events, TASK_EVENT_MUTEX); } void task_print_list(void) { int i; if (IS_ENABLED(CONFIG_FPU)) ccputs("Task Ready Name Events Time (s) " " StkUsed UseFPU\n"); else ccputs("Task Ready Name Events Time (s) " "StkUsed\n"); for (i = 0; i < TASK_ID_COUNT; i++) { char is_ready = (tasks_ready & (1<