/* Copyright 2016 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Hammer configuration */

#ifndef __CROS_EC_BOARD_H
#define __CROS_EC_BOARD_H

/* TODO: Remove CONFIG_SYSTEM_UNLOCKED prior to building MP FW. */
#define CONFIG_SYSTEM_UNLOCKED
/* TODO(b:63378217): Define FLASH_PSTATE_LOCKED prior to building MP FW. */
#undef CONFIG_FLASH_PSTATE_LOCKED

/* 48 MHz SYSCLK clock frequency */
#define CPU_CLOCK 48000000

/*
 * Flash layout: we redefine the sections offsets and sizes as we want to
 * include a rollback region, and will use RO/RW regions of different sizes.
 */
#undef _IMAGE_SIZE
#undef CONFIG_ROLLBACK_OFF
#undef CONFIG_ROLLBACK_SIZE
#undef CONFIG_FLASH_PSTATE
#undef CONFIG_FW_PSTATE_SIZE
#undef CONFIG_FW_PSTATE_OFF
#undef CONFIG_SHAREDLIB_SIZE
#undef CONFIG_RO_MEM_OFF
#undef CONFIG_RO_STORAGE_OFF
#undef CONFIG_RO_SIZE
#undef CONFIG_RW_MEM_OFF
#undef CONFIG_RW_STORAGE_OFF
#undef CONFIG_RW_SIZE
#undef CONFIG_EC_PROTECTED_STORAGE_OFF
#undef CONFIG_EC_PROTECTED_STORAGE_SIZE
#undef CONFIG_EC_WRITABLE_STORAGE_OFF
#undef CONFIG_EC_WRITABLE_STORAGE_SIZE
#undef CONFIG_WP_STORAGE_OFF
#undef CONFIG_WP_STORAGE_SIZE

#define CONFIG_FLASH_PSTATE
/* Do not use a dedicated PSTATE bank */
#undef CONFIG_FLASH_PSTATE_BANK

#define CONFIG_SHAREDLIB_SIZE	0

#define CONFIG_RO_MEM_OFF	0
#define CONFIG_RO_STORAGE_OFF	0
#define CONFIG_RO_SIZE		(44*1024)

/* EC rollback protection block */
#define CONFIG_ROLLBACK_OFF (CONFIG_RO_MEM_OFF + CONFIG_RO_SIZE)
#define CONFIG_ROLLBACK_SIZE CONFIG_FLASH_BANK_SIZE

#define CONFIG_RW_MEM_OFF	(CONFIG_ROLLBACK_OFF + CONFIG_ROLLBACK_SIZE)
#define CONFIG_RW_STORAGE_OFF	0
#define CONFIG_RW_SIZE		(CONFIG_FLASH_SIZE - \
				(CONFIG_RW_MEM_OFF - CONFIG_RO_MEM_OFF))

#define CONFIG_EC_PROTECTED_STORAGE_OFF		CONFIG_RO_MEM_OFF
#define CONFIG_EC_PROTECTED_STORAGE_SIZE	CONFIG_RO_SIZE
#define CONFIG_EC_WRITABLE_STORAGE_OFF		CONFIG_RW_MEM_OFF
#define CONFIG_EC_WRITABLE_STORAGE_SIZE		CONFIG_RW_SIZE

#define CONFIG_WP_STORAGE_OFF		CONFIG_EC_PROTECTED_STORAGE_OFF
#define CONFIG_WP_STORAGE_SIZE		CONFIG_EC_PROTECTED_STORAGE_SIZE

/* The UART console is on USART1 (PA9/PA10) */
#undef CONFIG_UART_CONSOLE
#define CONFIG_UART_CONSOLE 1

/* Optional features */
#define CONFIG_LOW_POWER_IDLE
#define CONFIG_LTO
#define CONFIG_FORCE_CONSOLE_RESUME
#define CONFIG_STM_HWTIMER32
#define CONFIG_HW_CRC

/* USB Configuration */
#define CONFIG_USB
#ifdef BOARD_HAMMER
#define CONFIG_USB_PID 0x5022
#elif defined(BOARD_STAFF)
#define CONFIG_USB_PID 0x502b
#elif defined(BOARD_WHISKERS)
#define CONFIG_USB_PID 0x5030
#else
#error "Invalid board"
#endif
#define CONFIG_STREAM_USB
#define CONFIG_USB_UPDATE

#undef CONFIG_USB_MAXPOWER_MA
#define CONFIG_USB_MAXPOWER_MA 100

#define CONFIG_USB_REMOTE_WAKEUP
#define CONFIG_USB_SUSPEND

#define CONFIG_USB_SERIALNO
/* Replaced at runtime (board_read_serial) by chip unique-id-based number. */
#define DEFAULT_SERIALNO ""

/* USB interface indexes (use define rather than enum to expand them) */
#ifdef SECTION_IS_RW
#define USB_IFACE_HID_KEYBOARD	0
#define USB_IFACE_UPDATE	1
#define USB_IFACE_HID_TOUCHPAD	2
#define USB_IFACE_I2C		3
#define USB_IFACE_COUNT		4
#else
#define USB_IFACE_UPDATE	0
#define USB_IFACE_COUNT		1
#endif

/* USB endpoint indexes (use define rather than enum to expand them) */
#define USB_EP_CONTROL		0
#define USB_EP_UPDATE		1
#ifdef SECTION_IS_RW
#define USB_EP_HID_KEYBOARD	2
#define USB_EP_HID_TOUCHPAD	3
#define USB_EP_I2C		4
#define USB_EP_COUNT		5
#else
#define USB_EP_COUNT		2
#endif

/* Optional features */
#define CONFIG_BOARD_PRE_INIT
#define CONFIG_WATCHDOG_HELP

/*
 * Enlarge the allowed write / read count for trackpad debug
 * In the extended I2C reading over I2C ( >= 128 bytes ), the header size
 * have to be 6 bytes instead of 4 bytes for receiving packets. Moreover,
 * buffer size have to be power of two.
 */
#undef CONFIG_USB_I2C_MAX_WRITE_COUNT
#define CONFIG_USB_I2C_MAX_WRITE_COUNT (128 - 4) /* 4 is maximum header size */

#undef CONFIG_USB_I2C_MAX_READ_COUNT
#define CONFIG_USB_I2C_MAX_READ_COUNT (1024 - 6) /* 6 is maximum header size */

/* No lid switch */
#undef CONFIG_LID_SWITCH

#ifdef SECTION_IS_RW
#define CONFIG_USB_HID
#define CONFIG_USB_HID_KEYBOARD
#define CONFIG_USB_HID_KEYBOARD_BACKLIGHT
#define CONFIG_USB_HID_TOUCHPAD

/* Virtual address for touchpad FW in USB updater. */
#define CONFIG_TOUCHPAD_VIRTUAL_OFF	0x80000000

/* Include touchpad FW hashes in image */
#define CONFIG_TOUCHPAD_HASH_FW

/* Touchpad firmware size and dimension difference */
#ifdef BOARD_HAMMER
#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_X 3207
#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_Y 1783
#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_X 1018 /* tenth of mm */
#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_Y 566 /* tenth of mm */
#define CONFIG_TOUCHPAD_VIRTUAL_SIZE (48*1024)
#elif defined(BOARD_STAFF)
#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_X 3206
#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_Y 1832
#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_X 1017 /* tenth of mm */
#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_Y 581 /* tenth of mm */
#define CONFIG_TOUCHPAD_VIRTUAL_SIZE (56*1024)
#elif defined(BOARD_WHISKERS)
/* TODO(b:68934906): Add support for touchpad and replace these values. */
#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_X 3000
#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_Y 1500
#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_X 1000 /* tenth of mm */
#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_Y 500 /* tenth of mm */
#define CONFIG_TOUCHPAD_VIRTUAL_SIZE (48*1024)
#else
#error "No touchpad information for board."
#endif

#define CONFIG_KEYBOARD_DEBUG
#undef CONFIG_KEYBOARD_BOOT_KEYS
#undef CONFIG_KEYBOARD_RUNTIME_KEYS
#if defined(BOARD_HAMMER) || defined(BOARD_WHISKERS)
#define CONFIG_KEYBOARD_BOARD_CONFIG
#define CONFIG_KEYBOARD_NEW_KEY
#endif
/* Keyboard output port list */
#define KB_OUT_PORT_LIST GPIO_A, GPIO_B, GPIO_C, GPIO_F

/* Enable control of I2C over USB */
#define CONFIG_USB_I2C
#define CONFIG_I2C
#define CONFIG_I2C_MASTER
#define I2C_PORT_MASTER 0

/* Enable PWM */
#define CONFIG_PWM

/* Enable Elan touchpad driver */
#define CONFIG_TOUCHPAD
#define CONFIG_TOUCHPAD_ELAN
#define CONFIG_TOUCHPAD_I2C_PORT 0
#define CONFIG_TOUCHPAD_I2C_ADDR (0x15 << 1)

#define CONFIG_CURVE25519

#define CONFIG_USB_PAIRING

#else /* SECTION_IS_RO */
/* Sign and switch to RW partition on boot. */
#define CONFIG_RWSIG
#define CONFIG_RSA
#define CONFIG_RSA_KEY_SIZE 3072
#define CONFIG_RSA_EXPONENT_3
#endif

#define CONFIG_SHA256
#ifdef SECTION_IS_RO
#define CONFIG_SHA256_UNROLLED
#endif

#define CONFIG_RWSIG_TYPE_RWSIG

/*
 * Add rollback protection, and independent RW region protection.
 */
#define CONFIG_ROLLBACK
#define CONFIG_ROLLBACK_SECRET_SIZE 32
#define CONFIG_ROLLBACK_SECRET_LOCAL_ENTROPY_SIZE 32
#define CONFIG_FLASH_PROTECT_RW
#ifdef SECTION_IS_RW
#undef CONFIG_ROLLBACK_UPDATE
#endif

#ifndef __ASSEMBLER__

/* Timer selection */
#define TIM_CLOCK32 2
#ifdef BOARD_WHISKERS
#define TIM_KBLIGHT 16
#define TIM_WATCHDOG 17
#else
#define TIM_WATCHDOG 16
#define TIM_KBLIGHT 17
#endif

#include "gpio_signal.h"

/* USB string indexes */
enum usb_strings {
	USB_STR_DESC = 0,
	USB_STR_VENDOR,
	USB_STR_PRODUCT,
	USB_STR_SERIALNO,
	USB_STR_VERSION,
	USB_STR_I2C_NAME,
	USB_STR_UPDATE_NAME,
	USB_STR_COUNT
};

#ifdef SECTION_IS_RW
enum pwm_channel {
	PWM_CH_KBLIGHT = 0,
	/* Number of PWM channels */
	PWM_CH_COUNT
};
#endif

#endif /* !__ASSEMBLER__ */
#endif /* __CROS_EC_BOARD_H */