/* Copyright 2018 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Intel GLK-RVP-ITE board-specific configuration */

#include "button.h"
#include "chipset.h"
#include "charger.h"
#include "console.h"
#include "driver/charger/isl923x.h"
#include "ec2i_chip.h"
#include "extpower.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "i2c.h"
#include "intc.h"
#include "keyboard_scan.h"
#include "lid_switch.h"
#include "pca9555.h"
#include "power.h"
#include "power_button.h"
#include "spi.h"
#include "switch.h"
#include "system.h"
#include "task.h"
#include "timer.h"
#include "uart.h"
#include "util.h"

#include "gpio_list.h"

#define I2C_PORT_PCA555_BOARD_ID_GPIO	IT83XX_I2C_CH_C
#define I2C_ADDR_PCA555_BOARD_ID_GPIO_FLAGS	0x20

/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
	{"charger", IT83XX_I2C_CH_A, 100, GPIO_I2C_A_SCL, GPIO_I2C_A_SDA},
	{"typec",   IT83XX_I2C_CH_B, 400, GPIO_I2C_B_SCL, GPIO_I2C_B_SDA},
	{"pmic",    IT83XX_I2C_CH_C, 100, GPIO_I2C_C_SCL, GPIO_I2C_C_SDA},
	{"ext_io",  IT83XX_I2C_CH_E, 400, GPIO_I2C_E_SCL, GPIO_I2C_E_SDA},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);

/* Charger Chips */
const struct charger_config_t chg_chips[] = {
	{
		.i2c_port = I2C_PORT_CHARGER,
		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
		.drv = &isl923x_drv,
	},
};

const unsigned int chg_cnt = ARRAY_SIZE(chg_chips);

/* Wake-up pins for hibernate */
const enum gpio_signal hibernate_wake_pins[] = {
	GPIO_AC_PRESENT,
	GPIO_LID_OPEN,
	GPIO_POWER_BUTTON_L,
};
const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins);

/* Called by APL power state machine when transitioning from G3 to S5 */
void chipset_pre_init_callback(void)
{
	int data;

	if (pca9555_read(I2C_PORT_PCA555_PMIC_BATT_GPIO,
		I2C_ADDR_PCA555_PMIC_BATT_GPIO_FLAGS,
		PCA9555_CMD_OUTPUT_PORT_0, &data))
		return;

	/*
	 * No need to re-init PMIC since settings are sticky across sysjump.
	 * However, be sure to check that PMIC is already enabled. If it is
	 * then there's no need to re-sequence the PMIC.
	 */
	if (system_jumped_to_this_image() && (data & PCA9555_IO_0))
		return;

	/* Enable SOC_3P3_EN_L: Set the Output port O0.1 to low level */
	data &= ~PCA9555_IO_1;
	pca9555_write(I2C_PORT_PCA555_PMIC_BATT_GPIO,
		I2C_ADDR_PCA555_PMIC_BATT_GPIO_FLAGS,
		PCA9555_CMD_OUTPUT_PORT_0, data);

	/* TODO: Find out from the spec */
	msleep(10);

	/* Enable PMIC_EN: Set the Output port O0.0 to high level */
	pca9555_write(I2C_PORT_PCA555_PMIC_BATT_GPIO,
		I2C_ADDR_PCA555_PMIC_BATT_GPIO_FLAGS,
		PCA9555_CMD_OUTPUT_PORT_0,
		data | PCA9555_IO_0);
}

/* Initialize board. */
static void board_init(void)
{
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_FIRST);

/* Called on AP S5 -> S3 transition */
static void board_chipset_startup(void)
{
}
DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT);

/* Called on AP S3 -> S5 transition */
static void board_chipset_shutdown(void)
{
}
DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT);

void chipset_do_shutdown(void)
{
	int data;

	if (pca9555_read(I2C_PORT_PCA555_PMIC_BATT_GPIO,
		I2C_ADDR_PCA555_PMIC_BATT_GPIO_FLAGS,
		PCA9555_CMD_OUTPUT_PORT_0, &data))
		return;

	/* Disable SOC_3P3_EN_L: Set the Output port O0.1 to high level */
	data |= PCA9555_IO_1;
	pca9555_write(I2C_PORT_PCA555_PMIC_BATT_GPIO,
		I2C_ADDR_PCA555_PMIC_BATT_GPIO_FLAGS,
		PCA9555_CMD_OUTPUT_PORT_0, data);

	/* TODO: Find out from the spec */
	msleep(10);

	/* Disable PMIC_EN: Set the Output port O0.0 to low level */
	pca9555_write(I2C_PORT_PCA555_PMIC_BATT_GPIO,
		I2C_ADDR_PCA555_PMIC_BATT_GPIO_FLAGS,
		PCA9555_CMD_OUTPUT_PORT_0,
		data & ~PCA9555_IO_0);
}

void board_hibernate_late(void)
{
}

void board_hibernate(void)
{
	/*
	 * To support hibernate called from console commands, ectool commands
	 * and key sequence, shutdown the AP before hibernating.
	 */
	chipset_do_shutdown();

	/* Added delay to allow AP to settle down */
	msleep(100);
}

int board_get_version(void)
{
	int data;

	if (pca9555_read(I2C_PORT_PCA555_BOARD_ID_GPIO,
			 I2C_ADDR_PCA555_BOARD_ID_GPIO_FLAGS,
			 PCA9555_CMD_INPUT_PORT_1, &data))
		return -1;

	return data & 0x0f;
}

static void pmic_init(void)
{
	/* No need to re-init PMIC since settings are sticky across sysjump. */
	if (system_jumped_to_this_image())
		return;

	/*
	 * PMIC INIT
	 * Configure Port O0.0 as Output port - PMIC_EN
	 * Configure Port O0.1 as Output port - SOC_3P3_EN_L
	 */
	pca9555_write(I2C_PORT_PCA555_PMIC_BATT_GPIO,
		      I2C_ADDR_PCA555_PMIC_BATT_GPIO_FLAGS,
		      PCA9555_CMD_CONFIGURATION_PORT_0, 0xfc);

	/*
	 * Set the Output port O0.0 to low level - PMIC_EN
	 * Set the Output port O0.1 to high level - SOC_3P3_EN_L
	 *
	 * POR of PCA9555 port is input with high impedance hence explicitly
	 * configure the SOC_3P3_EN_L to high level.
	 */
	pca9555_write(I2C_PORT_PCA555_PMIC_BATT_GPIO,
		      I2C_ADDR_PCA555_PMIC_BATT_GPIO_FLAGS,
		      PCA9555_CMD_OUTPUT_PORT_0, 0xfe);
}
DECLARE_HOOK(HOOK_INIT, pmic_init, HOOK_PRIO_INIT_I2C + 1);

/* Keyboard scan setting */
struct keyboard_scan_config keyscan_config = {
	.output_settle_us = 35,
	.debounce_down_us = 5 * MSEC,
	.debounce_up_us = 40 * MSEC,
	.scan_period_us = 3 * MSEC,
	.min_post_scan_delay_us = 1000,
	.poll_timeout_us = 100 * MSEC,
	.actual_key_mask = {
		0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
	},
};