/* Copyright 2017 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include "atomic.h"
#include "extpower.h"
#include "charge_manager.h"
#include "common.h"
#include "console.h"
#include "driver/tcpm/anx74xx.h"
#include "driver/tcpm/ps8xxx.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "registers.h"
#include "system.h"
#include "task.h"
#include "timer.h"
#include "util.h"
#include "usb_mux.h"
#include "usb_pd.h"
#include "usb_pd_tcpm.h"

#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)

#define PDO_FIXED_FLAGS (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |\
			 PDO_FIXED_COMM_CAP)

const uint32_t pd_src_pdo[] = {
	PDO_FIXED(5000, 3000, PDO_FIXED_FLAGS),
};
const int pd_src_pdo_cnt = ARRAY_SIZE(pd_src_pdo);

const uint32_t pd_snk_pdo[] = {
	PDO_FIXED(5000, 500, PDO_FIXED_FLAGS),
	PDO_BATT(4750, 21000, 50000),
	PDO_VAR(4750, 21000, 3000),
};
const int pd_snk_pdo_cnt = ARRAY_SIZE(pd_snk_pdo);

int board_vbus_source_enabled(int port)
{
	if (port != 0)
		return 0;
	return gpio_get_level(GPIO_USB_C0_5V_EN);
}

int pd_set_power_supply_ready(int port)
{
	/* Disable charging */
	gpio_set_level(GPIO_USB_C0_CHARGE_L, 1);

	/* Enable VBUS source */
	gpio_set_level(GPIO_USB_C0_5V_EN, 1);

	/* notify host of power info change */
	pd_send_host_event(PD_EVENT_POWER_CHANGE);

	return EC_SUCCESS; /* we are ready */
}

void pd_power_supply_reset(int port)
{
	/* Disable VBUS source */
	gpio_set_level(GPIO_USB_C0_5V_EN, 0);

	/* notify host of power info change */
	pd_send_host_event(PD_EVENT_POWER_CHANGE);
}

int pd_snk_is_vbus_provided(int port)
{
	return !gpio_get_level(GPIO_USB_C0_VBUS_WAKE_L);
}

__override int pd_check_power_swap(int port)
{
	/* If type-c port is supplying power, we never swap PR (to source) */
	if (port == charge_manager_get_active_charge_port())
		return 0;
	/*
	 * Allow power swap as long as we are acting as a dual role device,
	 * otherwise assume our role is fixed (not in S0 or console command
	 * to fix our role).
	 */
	return pd_get_dual_role(port) == PD_DRP_TOGGLE_ON ? 1 : 0;
}

int pd_check_vconn_swap(int port)
{
	/* in G3, do not allow vconn swap since pp5000_A rail is off */
	return gpio_get_level(GPIO_PMIC_SLP_SUS_L);
}

int board_set_active_charge_port(int port)
{
	const int active_port = charge_manager_get_active_charge_port();

	if (port < 0 || CHARGE_PORT_COUNT <= port)
		return EC_ERROR_INVAL;

	if (port == active_port)
		return EC_SUCCESS;

	/* Don't charge from a source port */
	if (board_vbus_source_enabled(port))
		return EC_ERROR_INVAL;

	CPRINTS("New charger p%d", port);

	switch (port) {
	case CHARGE_PORT_TYPEC0:
		/* This is connected to TP on board version 2.2+ thus no-op */
		gpio_set_level(GPIO_USB_C0_CHARGE_L, 0);
		gpio_set_level(GPIO_AC_JACK_CHARGE_L, 1);
		gpio_enable_interrupt(GPIO_ADP_IN_L);
		break;
	case CHARGE_PORT_BARRELJACK:
		/* Make sure BJ adapter is sourcing power */
		if (gpio_get_level(GPIO_ADP_IN_L))
			return EC_ERROR_INVAL;
		/* This will cause brown out when switching from type-c on
		 * board version 2.2+ thus the rest of the code is no-op. */
		gpio_set_level(GPIO_AC_JACK_CHARGE_L, 0);
		/* If type-c voltage > BJ voltage, we'll brown out due to the
		 * reverse current protection of PU3 but it's intended. */
		gpio_set_level(GPIO_USB_C0_CHARGE_L, 1);
		gpio_disable_interrupt(GPIO_ADP_IN_L);
		break;
	default:
		return EC_ERROR_INVAL;
	}

	return EC_SUCCESS;
}

int board_get_battery_soc(void)
{
	return 100;
}