# -*- makefile -*-
# Copyright 2014 The ChromiumOS Authors
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
#
# Board-specific build requirements

# Define the SoC used by this board
CHIP:=g
CHIP_FAMILY:=cr50
CHIP_VARIANT ?= cr50_fpga

# Additional / overriding warnings for common rules and chip
# (TODO) enable after https://crrev.com/c/3198155
# CFLAGS_BOARD :=-Wno-array-parameter -Wno-stringop-overread

# This file is included twice by the Makefile, once to determine the CHIP info
# and then again after defining all the CONFIG_ and HAS_TASK variables. We use
# a guard so that recipe definitions and variable extensions only happen the
# second time.
ifeq ($(BOARD_MK_INCLUDED_ONCE),)

# List of variables which can be defined in the environment or set in the make
# command line.
ENV_VARS := CR50_DEV CRYPTO_TEST CMAC_TEST DCRYPTO_TEST DRBG_TEST ECDSA_TEST\
	    H1_RED_BOARD HMAC_SHA256_TEST P256_BIN_TEST RND_TEST SELF_TEST\
	    SHA1_TEST SHA256_TEST U2F_TEST U2F_VERBOSE

ifneq ($(H1_RED_BOARD),)
CPPFLAGS += -DH1_RED_BOARD=$(EMPTY)
endif

ifneq ($(CRYPTO_TEST),)
CPPFLAGS += -DCRYPTO_TEST_SETUP

# These options only work with CRYPTO_TEST=1
ifneq ($(DCRYPTO_TEST),)
CPPFLAGS_RW += -DCRYPTO_TEST_CMD_DCRYPTO_TEST=1
endif

ifneq ($(DRBG_TEST),)
CPPFLAGS_RW += -DCRYPTO_TEST_CMD_HMAC_DRBG=1
endif

ifneq ($(ECDSA_TEST),)
CPPFLAGS_RW += -DCRYPTO_TEST_CMD_DCRYPTO_ECDSA=1
endif

ifneq ($(HMAC_SHA256_TEST),)
CPPFLAGS_RW += -DHMAC_SHA256_TEST=1
endif

ifneq ($(P256_BIN_TEST),)
CPPFLAGS_RW += -DP256_BIN_TEST=1
endif

ifneq ($(RND_TEST),)
CPPFLAGS_RW += -DCRYPTO_TEST_CMD_RAND=1
endif

ifneq ($(SELF_TEST),)
CPPFLAGS_RW += -DSELF_INTEGRITY_TEST=1
endif

ifneq ($(SHA1_TEST),)
CPPFLAGS_RW += -DSHA1_TEST=1
endif

ifneq ($(SHA256_TEST),)
CPPFLAGS_RW += -DSHA256_TEST=1
endif

ifneq ($(U2F_TEST),)
CPPFLAGS_RW += -DCRYPTO_TEST_CMD_U2F_TEST=1
endif

ifneq ($(U2F_VERBOSE),)
CPPFLAGS_RW += -DU2F_DEV_VERBOSE=1
endif

endif # CRYPTO_TEST=1


BOARD_MK_INCLUDED_ONCE=1
SIG_EXTRA = --cros
else

# Need to generate a .hex file
all: hex

ifeq ($(CONFIG_DCRYPTO_BOARD),y)
# chip/g/build.mk also adds chip/g/dcrypto for CONFIG_DCRYPTO
# so, only add it if we build RW with CONFIG_DCRYPTO_BOARD
CPPFLAGS_RW += -I$(realpath $(BDIR)/dcrypto)
dirs-y += $(BDIR)/dcrypto
endif

# The simulator components have their own subdirectory
CFLAGS += -I$(realpath $(BDIR)/tpm2)
dirs-y += $(BDIR)/tpm2

# Objects that we need to build
board-y =  board.o
board-y += ap_state.o
board-y += closed_source_set1.o
board-y += ec_state.o
board-y += int_ap_extension.o
board-y += power_button.o
board-y += servo_state.o
board-y += ap_uart_state.o
board-y += factory_mode.o
board-${CONFIG_RDD} += rdd.o
board-${CONFIG_USB_SPI_V2} += usb_spi.o
board-${CONFIG_USB_I2C} += usb_i2c.o
board-y += recovery_button.o
board-y += user_pres.o

fips-y=
fips-y += dcrypto/fips.o
fips-y += dcrypto/fips_rand.o
fips-$(CONFIG_U2F) += dcrypto/u2f.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/aes.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/app_cipher.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/app_key.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/bn.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/dcrypto_bn.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/dcrypto_p256.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/compare.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/dcrypto_runtime.o
ifneq ($(CRYPTO_TEST),)
ifneq ($(CMAC_TEST),)
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/aes_cmac.o
endif
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/gcm.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/hkdf.o
endif
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/hash_api.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/hmac_sw.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/hmac_drbg.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/key_ladder.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/p256.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/p256_ec.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/rsa.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/sha_hw.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/sha1.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/sha256.o
ifeq ($(CONFIG_UPTO_SHA512),y)
ifeq ($(CONFIG_DCRYPTO_SHA512),y)
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/dcrypto_sha512.o
# we may still want to have software implementation
ifneq ($(CONFIG_SHA512_HW_EQ_SW),y)
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/sha512.o
endif
else
# only software version
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/sha512.o
endif
endif
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/x509.o
fips-${CONFIG_DCRYPTO_BOARD} += dcrypto/trng.o
fips-${CONFIG_FIPS_UTIL} += dcrypto/util.o

custom-board-ro_objs-${CONFIG_FIPS_UTIL} = $(BDIR)/dcrypto/util.o

# FIPS console and TPM2 commands are outside FIPS module
board-y += fips_cmd.o
board-y += crypto_api.o
board-y += u2f_state_load.o

board-y += tpm2/NVMem.o
board-y += tpm2/aes.o
board-y += tpm2/ecc.o
board-y += tpm2/endorsement.o
board-y += tpm2/hash.o
board-y += tpm2/hash_data.o
board-y += tpm2/manufacture.o
board-y += tpm2/nvmem_ops.o
board-y += tpm2/platform.o
board-y += tpm2/rsa.o
board-y += tpm2/stubs.o
board-y += tpm2/tpm_mode.o
board-y += tpm2/tpm_state.o
board-y += tpm2/trng.o
board-y += tpm2/virtual_nvmem.o
board-y += tpm_nvmem_ops.o
board-y += wp.o
board-$(CONFIG_PINWEAVER)+=pinweaver_tpm_imports.o
board-$(CONFIG_PLATFORM_PINWEAVER)+=pinweaver_tpm_imports.o

TPM2_MODULE := linkedtpm2.cp.o
board-y += $(TPM2_MODULE)

ifneq ($(H1_RED_BOARD),)
CPPFLAGS += -DH1_RED_BOARD=$(EMPTY)
endif
RW_BD_OUT=$(out)/RW/$(BDIR)

# Build fips code separately
ifneq ($(fips-y),)
FIPS_MODULE=dcrypto/fips_module.o
FIPS_LD_SCRIPT=$(BDIR)/dcrypto/fips_module.ld
RW_FIPS_OBJS=$(patsubst %.o, $(RW_BD_OUT)/%.o, $(fips-y))
$(RW_FIPS_OBJS): CFLAGS += -frandom-seed=0 -fno-fat-lto-objects -Wswitch\
			   -Wsign-compare -Wuninitialized

$(RW_FIPS_OBJS): | $(out)/ec_version.h $(out)/env_config.h
rw_board_deps := $(addsuffix .d, $(RW_FIPS_OBJS))

# Note, since FIPS object files are compiled with lto, actual compilation
# and code optimization take place during link time.
# Consider -ffile-prefix-map=old_path=new_path if needed
FIPS_CFLAGS = $(CFLAGS) -frandom-seed=0 -flto=1 -flto-partition=1to1 -fipa-pta\
  -fvisibility=hidden -fipa-cp-clone -fweb -ftree-partial-pre\
  -flive-range-shrinkage -fgcse-after-reload -fgcse-sm -fgcse-las -fivopts\
  -fpredictive-commoning -freorder-blocks-algorithm=stc\
  $(CFLAGS_LTO_PARTIAL_LINK)

$(RW_BD_OUT)/$(FIPS_MODULE): $(RW_FIPS_OBJS) $(FIPS_LD_SCRIPT)
	@echo "  LD      $(notdir $@)"
	$(Q)$(CC) $(FIPS_CFLAGS) --static -Wl,--relocatable\
		-Wl,-T $(FIPS_LD_SCRIPT) -Wl,-Map=$@.map -o $@ $(RW_FIPS_OBJS)
	$(Q)$(OBJDUMP) -th $@ > $@.sym

board-y+= $(FIPS_MODULE)
endif

# Build and link with an external library
EXTLIB := $(realpath ../../third_party/tpm2)
CFLAGS += -I$(EXTLIB)

# For the benefit of the tpm2 library.
INCLUDE_ROOT := $(abspath ./include)
CFLAGS += -I$(INCLUDE_ROOT)
CPPFLAGS += -I$(abspath ./builtin)
CPPFLAGS += -I$(abspath ./chip/$(CHIP))
# For core includes
CPPFLAGS += -I$(abspath .)
CPPFLAGS += -I$(abspath $(BDIR))
CPPFLAGS += -I$(abspath ./fuzz)
CPPFLAGS += -I$(abspath ./test)

# Make sure the context of the software sha512 implementation fits. If it ever
# increases, a compile time assert will fire in tpm2/hash.c.
ifeq ($(CONFIG_UPTO_SHA512),y)
CFLAGS += -DUSER_MIN_HASH_STATE_SIZE=200
else
CFLAGS += -DUSER_MIN_HASH_STATE_SIZE=104
endif
# Configure TPM2 headers accordingly.
CFLAGS += -DEMBEDDED_MODE=1

# Use absolute path as the destination to ensure that TPM2 makefile finds the
# place for output.
outdir := $(abspath $(RW_BD_OUT))
cmd_tpm2linked := $(MAKE) obj=$(outdir) EMBEDDED_MODE=1 LTO=1 \
		 -C $(EXTLIB) --no-print-directory $(outdir)/$(TPM2_MODULE)

tpm2_check_clean := $(cmd_tpm2linked) -q && echo clean
ifneq ($(shell $(tpm2_check_clean)),clean)
# Force the external build only if it is needed.
.PHONY: $(RW_BD_OUT)/$(TPM2_MODULE)
endif

$(RW_BD_OUT)/$(TPM2_MODULE):
	$(call quiet,tpm2linked,TPM2   )

endif   # BOARD_MK_INCLUDED_ONCE is nonempty