From 129807aa19f5d375f8574438d37b729c709f4cf2 Mon Sep 17 00:00:00 2001 From: Mary Ruthven Date: Wed, 22 Aug 2018 15:17:42 -0700 Subject: rdd: use rdd_interrupt for rdd_connect/disconnect Occasionally cc1 and cc2 might be in a valid debug range for a short time even if a debug accesssory isn't connected. The rdd hardware will debounce the signals long enough to make sure they're stable before triggering the Rdd interrupt. This change moves all rdd connect/disconnect logic to the interrupt instead of sampling the voltages in detect_rdd. In detect_rdd the samples of the cc lines falsely triggered rdd connect whenever the cc voltages happened to be in the valid debug range. We weren't waiting for Rdd to declare the voltage stable before running rdd connect. Moving the logic from rdd_detect to rdd_interrupt will ensure the signals are actually stable before we change the rdd state. BUG=b:113064204 BRANCH=cr50 TEST=manual connect suzyq reboot cr50 verify rdd is connected disconnect suzyq verify rdd is disconnected boot nami leave it up for a while make sure there aren't any false connects reconnect suzyq verify rdd is connected disconnect suzyq verify rdd is disconnected reboot cr50 verify rdd is disconnected run firmware_Cr50CCDServoCap and firmware_Cr50DeviceState Change-Id: I3eeaa39f79d2ccc3e997da291d8aae1f12103dc8 Signed-off-by: Mary Ruthven Reviewed-on: https://chromium-review.googlesource.com/1185967 Tested-by: Mary Ruthven Reviewed-by: Randall Spangler Reviewed-by: Vadim Bendebury Commit-Queue: Mary Ruthven --- chip/g/rdd.c | 70 ++++++++++++++++++++++-------------------------------------- chip/g/rdd.h | 2 +- 2 files changed, 26 insertions(+), 46 deletions(-) (limited to 'chip') diff --git a/chip/g/rdd.c b/chip/g/rdd.c index 9febad81c6..9460ad35e6 100644 --- a/chip/g/rdd.c +++ b/chip/g/rdd.c @@ -36,17 +36,20 @@ static enum device_state state = DEVICE_STATE_DISCONNECTED; /* Force detecting a debug accessory (ignore RDD CC detect hardware) */ static int force_detected; +/* + * The Rdd state. This is saved in the rdd_interrupt to make sure the state is + * stable. + */ +static uint8_t rdd_is_detected_shadow; + /** * Get instantaneous cable detect state * * @return 1 if debug accessory is detected, 0 if not detected */ -int rdd_is_detected(void) +uint8_t rdd_is_detected(void) { - uint8_t cc1 = GREAD_FIELD(RDD, INPUT_PIN_VALUES, CC1); - uint8_t cc2 = GREAD_FIELD(RDD, INPUT_PIN_VALUES, CC2); - - return (cc1 == cc2 && (cc1 == 3 || cc1 == 1)); + return rdd_is_detected_shadow; } void print_rdd_state(void) @@ -73,6 +76,7 @@ static void rdd_disconnect(void) */ gpio_set_flags(GPIO_CCD_MODE_L, GPIO_INPUT); } +DECLARE_DEFERRED(rdd_disconnect); /** * Handle debug accessory connecting @@ -105,6 +109,12 @@ DECLARE_DEFERRED(rdd_connect); */ static void rdd_interrupt(void) { + uint8_t cc1 = GREAD_FIELD(RDD, INPUT_PIN_VALUES, CC1); + uint8_t cc2 = GREAD_FIELD(RDD, INPUT_PIN_VALUES, CC2); + + /* Save the rdd state while the cc lines are stable. */ + rdd_is_detected_shadow = (cc1 == cc2 && (cc1 == 3 || cc1 == 1)); + /* * The Rdd detector is level-sensitive with debounce. That is, it * samples the RDCCx pin states. If they're different, it resets the @@ -128,12 +138,13 @@ static void rdd_interrupt(void) * unlikely to actually trigger the deferred function twice, and it * doesn't care if we do anyway because on the second call it'll * already be in the connected state. - * */ if (rdd_is_detected()) { /* Accessory detected; toggle to looking for disconnect */ GWRITE(RDD, PROG_DEBUG_STATE_MAP, DETECT_DISCONNECT); + /* Cancel any pending disconnects */ + hook_call_deferred(&rdd_disconnect_data, -1); /* * Trigger the deferred handler so that we move back into the * connected state before our debounce interval expires. @@ -141,10 +152,15 @@ static void rdd_interrupt(void) hook_call_deferred(&rdd_connect_data, 0); } else { /* - * Not detected; toggle to looking for connect. We'll start - * debouncing disconnect the next time HOOK_SECOND triggers - * rdd_detect() below. + * Skip disconnecting Rdd, if rdd is force detected. If Rdd is + * already disconnected, no need to do it again. */ + if (!force_detected && state != DEVICE_STATE_DISCONNECTED) { + /* Debounce disconnect for 1 second */ + state = DEVICE_STATE_DEBOUNCING; + hook_call_deferred(&rdd_disconnect_data, SECOND); + } + /* Not detected; toggle to looking for connect. */ GWRITE(RDD, PROG_DEBUG_STATE_MAP, DETECT_DEBUG); } @@ -156,42 +172,6 @@ static void rdd_interrupt(void) } DECLARE_IRQ(GC_IRQNUM_RDD0_INTR_DEBUG_STATE_DETECTED_INT, rdd_interrupt, 1); -/** - * RDD CC detect state machine - */ -static void rdd_detect(void) -{ - /* Handle detecting device */ - if (force_detected || rdd_is_detected()) { - rdd_connect(); - return; - } - - /* CC wasn't detected. If we're already disconnected, done. */ - if (state == DEVICE_STATE_DISCONNECTED) - return; - - /* If we were debouncing, we're now sure we're disconnected */ - if (state == DEVICE_STATE_DEBOUNCING) { - rdd_disconnect(); - return; - } - - /* - * Otherwise, we were connected but the accessory seems to be - * disconnected right now. PD negotiation (e.g. during EC reset or - * sysjump) can alter the RDCCx voltages, so we need to debounce this - * signal for longer than the Rdd hardware does to make sure it's - * really disconnected before we deassert CCD_MODE_L. - */ - state = DEVICE_STATE_DEBOUNCING; -} -/* - * Bump up priority so this runs before the CCD_MODE_L state machine, because - * we can change CCD_MODE_L. - */ -DECLARE_HOOK(HOOK_SECOND, rdd_detect, HOOK_PRIO_DEFAULT - 1); - void init_rdd_state(void) { /* Enable RDD hardware */ diff --git a/chip/g/rdd.h b/chip/g/rdd.h index 159801b203..e30dc0c80f 100644 --- a/chip/g/rdd.h +++ b/chip/g/rdd.h @@ -21,6 +21,6 @@ void print_rdd_state(void); * * @return 1 if debug accessory is detected, 0 if not detected. */ -int rdd_is_detected(void); +uint8_t rdd_is_detected(void); #endif /* __CROS_RDD_H */ -- cgit v1.2.1