delta/coreboot/arm-trusted-firmware.git/fdts/stm32mp157c-odyssey.dts, branch topics/clang-format review.coreboot.org: arm-trusted-firmware.git fdts: stm32mp1: add support for the Seeed Odyssey SoM and board 2021-04-21T17:56:10+00:00 Grzegorz Szymaszek gszymaszek@short.pl 2021-04-21T17:46:18+00:00 c3c6732f8eb9746a663909f3a2092fea752bb6e6 Seeed Studio’s SoM‐STM32MP157C is a System‐on‐Module that integrates the STM32MP157C MPU (the 650 MHz dual‐core variant with a GPU and a cryptographic processor) the STPMIC1A PMIC, 512 MB of DDR3 RAM and a 4 GB eMMC. There are two LEDs as well, one hardwired to the PMIC’s VDD output, and the other available at the MPU’s port PG3. The SoM can be plugged into a carrier board using its three 70‑pin connectors. Seeed Odyssey‐STM32MP157C is the reference carrier board for the SoM in a Raspberry Pi‐like form factor. It features a WiFi/Bluetooth chip, a microSD card port and various I/O interfaces. The device tree is based on the DKx boards. TF‑A was successfully tested on the board with Buildroot 2021.02 and U-Boot 2021.04. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Change-Id: I2c9aecc925561e8d338dddbb192d3bb23a533914 
Seeed Studio’s SoM‐STM32MP157C is a System‐on‐Module that integrates the
STM32MP157C MPU (the 650 MHz dual‐core variant with a GPU and a
cryptographic processor) the STPMIC1A PMIC, 512 MB of DDR3 RAM and a
4 GB eMMC. There are two LEDs as well, one hardwired to the PMIC’s VDD
output, and the other available at the MPU’s port PG3. The SoM can be
plugged into a carrier board using its three 70‑pin connectors.

Seeed Odyssey‐STM32MP157C is the reference carrier board for the SoM in
a Raspberry Pi‐like form factor. It features a WiFi/Bluetooth chip, a
microSD card port and various I/O interfaces.

The device tree is based on the DKx boards. TF‑A was successfully tested
on the board with Buildroot 2021.02 and U-Boot 2021.04.

Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Change-Id: I2c9aecc925561e8d338dddbb192d3bb23a533914