2013-03-08 Yann Sionneau * lm32-desc.c: Regenerate. 2013-03-01 H.J. Lu * i386-reg.tbl (riz): Add RegRex64. * i386-tbl.h: Regenerated. 2013-02-28 Yufeng Zhang * aarch64-tbl.h (QL_I3SAMEW, QL_I3WWX): New macros. (aarch64_feature_crc): New static. (CRC): New macro. (aarch64_opcode_table): Add entries for the crc32b, crc32h, crc32w, crc32x, crc32cb, crc32ch, crc32cw and crc32cx instructions. * aarch64-asm-2.c: Re-generate. * aarch64-dis-2.c: Ditto. * aarch64-opc-2.c: Ditto. 2013-02-27 Alan Modra * rl78-decode.opc (rl78_decode_opcode): Fix typo. * rl78-decode.c: Regenerate. 2013-02-25 Kaushik Phatak * rl78-decode.opc: Fix encoding of DIVWU insn. * rl78-decode.c: Regenerate. 2013-02-19 H.J. Lu PR gas/15159 * i386-dis.c (rm_table): Add clac and stac to RM_0F01_REG_1. * i386-gen.c (cpu_flag_init): Add CPU_SMAP_FLAGS. (cpu_flags): Add CpuSMAP. * i386-opc.h (CpuSMAP): New. (i386_cpu_flags): Add cpusmap. * i386-opc.tbl: Add clac and stac. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2013-02-15 Markos Chandras * metag-dis.c: Initialize outf->bytes_per_chunk to 4 which also makes the disassembler output be in little endian like it should be. 2013-02-14 Yufeng Zhang * aarch64-opc.c (aarch64_prfops): Change unnamed operation 'name' fields to NULL. (aarch64_print_operand): Adjust the printing for AARCH64_OPND_PRFOP. 2013-02-13 Maciej W. Rozycki * mips-dis.c (is_compressed_mode_p): Only match symbols from the section disassembled. 2013-02-11 Kyrylo Tkachov * arm-dis.c: Update strht pattern. 2013-02-09 Jürgen Urban * mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for single-float. Disable ll, lld, sc and scd for EE. Disable the trunc.w.s macro for EE. 2013-02-06 Sandra Loosemore Andrew Jenner Based on patches from Altera Corporation. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and nios2-opc.c. * Makefile.in: Regenerated. * configure.in: Add case for bfd_nios2_arch. * configure: Regenerated. * disassemble.c (ARCH_nios2): Define. (disassembler): Add case for bfd_arch_nios2. * nios2-dis.c: New file. * nios2-opc.c: New file. 2013-02-04 Alan Modra * po/POTFILES.in: Regenerate. * rl78-decode.c: Regenerate. * rx-decode.c: Regenerate. 2013-01-30 Yufeng Zhang * aarch64-tbl.h (aarch64_opcode_table): Flag sshll, sshll2, ushll and ushll2 with F_HAS_ALIAS. Add entries for sxtl, sxtl2, uxtl and uxtl2. * aarch64-asm.c (convert_xtl_to_shll): New function. (convert_to_real): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by calling convert_xtl_to_shll. * aarch64-dis.c (convert_shll_to_xtl): New function. (convert_to_alias): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by calling convert_shll_to_xtl. * aarch64-gen.c: Update copyright year. * aarch64-asm-2.c: Re-generate. * aarch64-dis-2.c: Re-generate. * aarch64-opc-2.c: Re-generate. 2013-01-24 Nick Clifton * v850-dis.c: Add support for e3v5 architecture. * v850-opc.c: Likewise. 2013-01-17 Yufeng Zhang * aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI. * aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): For AARCH64_MOD_LSL, move the range check on the shift amount before the alignment check; change to call set_sft_amount_out_of_range_error instead of set_imm_out_of_range_error. * aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL. (aarch64_opcode_table): Remove the OP enumerator from the asimdimm 8-bit MOVI entry; change the 2nd operand from SIMD_IMM to SIMD_IMM_SFT. 2013-01-16 H.J. Lu * i386-gen.c (operand_type_init): Add OPERAND_TYPE_IMM32_64. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2013-01-15 Nick Clifton * v850-dis.c (get_operand_value): Sign extend V850E_IMMEDIATE values. * v850-opc.c (IMM16LO): Add V850_OPERAND_SIGNED attribute. 2013-01-14 Will Newton * metag-dis.c (REG_WIDTH): Increase to 64. 2013-01-10 Peter Bergner * ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries. * ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK, XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines. (SH6): Update. <"tabort.", "tabortdc.", "tabortdci.", "tabortwc.", "tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.", "treclaim.", "tsr.">: Add POWER8 HTM opcodes. <"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes. 2013-01-10 Will Newton * Makefile.am: Add Meta. * configure.in: Add Meta. * disassemble.c: Add Meta support. * metag-dis.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. 2013-01-07 Kaushik Phatak * cr16-dis.c (make_instruction): Rename to cr16_make_instruction. (match_opcode): Rename to cr16_match_opcode. 2013-01-04 Juergen Urban * mips-dis.c: Add names for CP0 registers of r5900. * mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq. Add support for MIPS r5900 CPU. Add support for 128 bit MMI (Multimedia Instructions). Add support for EE instructions (Emotion Engine). Disable unsupported floating point instructions (64 bit and undefined compare operations). Enable instructions of MIPS ISA IV which are supported by r5900. Disable 64 bit co processor instructions. Disable 64 bit multiplication and division instructions. Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)). Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900. Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers. 2013-01-04 Yufeng Zhang * aarch64-opc.c (aarch64_print_operand): Change to print AARCH64_OPND_IMM_MOV in hexadecimal in the instruction and in decimal in comment. * aarch64-tbl.h (aarch64_opcode_table): Remove the 'F_PSEUDO' flag from the opcode entries of OP_MOV_IMM_LOG, OP_MOV_IMM_WIDEN and OP_MOV_IMM_WIDE. 2013-01-04 Yufeng Zhang * aarch64-opc.c (aarch64_prfops): Update to support PLIL1KEEP, PLIL1STRM, PLIL2KEEP, PLIL2STRM, PLIL3KEEP and PLIL3STRM. 2013-01-02 H.J. Lu * i386-gen.c (process_copyright): Update copyright year to 2013. 2013-01-02 Kaushik Phatak * cr16-dis.c (match_opcode,make_instruction): Remove static declaration. (dwordU,wordU): Moved typedefs to opcode/cr16.h (cr16_words,cr16_allWords,cr16_currInsn): Added prefix 'cr16_'. For older changes see ChangeLog-2012 Copyright (C) 2013 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: