@settitle GNU AutoGen - The Automated Program Generator @setchapternewpage off @syncodeindex pg cp @c %**end of header @copying This manual is for GNU AutoGen version 5.16, updated August 2012. Copyright @copyright{} 1992-2012 by Bruce Korb. @quotation Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. @end quotation @end copying @ignore EDIT THIS FILE WITH CAUTION (agdoc.texi) It has been AutoGen-ed August 11, 2012 at 09:42:32 AM by AutoGen 5.16.2 From the definitions /old-home/bkorb/ag/ag/doc/ag-texi-30133.d/agdoc.def and the template file auto_gen.tpl Plus bits and pieces gathered from all over the source/build directories: /old-home/bkorb/ag/ag/doc/auto_gen.tpl /old-home/bkorb/ag/ag/agen5/opts.def /old-home/bkorb/ag/ag/columns/invoke-columns.texi /old-home/bkorb/ag/ag/getdefs/invoke-getdefs.texi /old-home/bkorb/ag/ag/xml2ag/invoke-xml2ag.texi /old-home/bkorb/ag/ag/doc/snprintfv.texi /old-home/bkorb/ag/ag/agen5/defParse-fsm.c /old-home/bkorb/ag/ag/agen5/opts.h /old-home/bkorb/ag/ag/autoopts/libopts.texi /old-home/bkorb/ag/ag/doc/autogen-intro.texi /old-home/bkorb/ag/ag/agen5/invoke-autogen.texi /old-home/bkorb/ag/ag/agen5/agShell.c /old-home/bkorb/ag/ag/agen5/defDirect.c /old-home/bkorb/ag/ag/agen5/expExtract.c /old-home/bkorb/ag/ag/agen5/expFormat.c /old-home/bkorb/ag/ag/agen5/expGperf.c /old-home/bkorb/ag/ag/agen5/expGuile.c /old-home/bkorb/ag/ag/agen5/expMake.c /old-home/bkorb/ag/ag/agen5/expOutput.c /old-home/bkorb/ag/ag/agen5/expPrint.c /old-home/bkorb/ag/ag/agen5/expState.c /old-home/bkorb/ag/ag/agen5/expString.c /old-home/bkorb/ag/ag/agen5/fmemopen.c /old-home/bkorb/ag/ag/agen5/funcCase.c /old-home/bkorb/ag/ag/agen5/funcDef.c /old-home/bkorb/ag/ag/agen5/funcEval.c /old-home/bkorb/ag/ag/agen5/funcFor.c /old-home/bkorb/ag/ag/agen5/funcIf.c /old-home/bkorb/ag/ag/agen5/functions.c /old-home/bkorb/ag/ag/agen5/schemedef.scm /old-home/bkorb/ag/ag/doc/autogen-texi.txt @end ignore @dircategory GNU programming tools @direntry * AutoGen: (autogen). The Automated Program Generator @end direntry @ifinfo @ifnothtml This file documents GNU AutoGen Version 5.16. AutoGen copyright @copyright{} 1992-2012 Bruce Korb AutoOpts copyright @copyright{} 1992-2012 Bruce Korb snprintfv copyright @copyright{} 1999-2000 Gary V. Vaughan AutoGen is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. AutoGen is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . @ignore Permission is granted to process this file through TeX and print the results, provided the printed document carries copying permission notice identical to this one except for the removal of this paragraph. @end ignore @end ifnothtml @end ifinfo @finalout @titlepage @title AutoGen - The Automated Program Generator @subtitle For version 5.16, August 2012 @author Bruce Korb @author @email{bkorb@@gnu.org} @page @vskip 0pt plus 1filll AutoGen copyright @copyright{} 1992-2012 Bruce Korb @sp 2 This is the second edition of the GNU AutoGen documentation, @sp 2 Published by Bruce Korb, 910 Redwood Dr., Santa Cruz, CA 95060 AutoGen is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. AutoGen is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . @insertcopying @end titlepage @node Top, Introduction, , (dir) @top The Automated Program Generator @comment node-name, next, previous, up This file documents AutoGen version 5.16. It is a tool designed for generating program files that contain repetitive text with varied substitutions. This document is very long because it is intended as a reference document. For a quick start example, @xref{Example Usage}. The AutoGen distribution includes the basic generator engine and several add-on libraries and programs. Of the most general interest would be Automated Option processing, @xref{AutoOpts}, which also includes stand-alone support for configuration file parsing, @xref{Features}. Please see the ``Add-on packages for AutoGen'' section for additional programs and libraries associated with AutoGen. This edition documents version 5.16, August 2012. @menu * Introduction:: AutoGen's Purpose * Definitions File:: AutoGen Definitions File * Template File:: AutoGen Template * Augmenting AutoGen:: Augmenting AutoGen Features * autogen Invocation:: Invoking AutoGen * Installation:: Configuring and Installing * AutoOpts:: Automated Option Processing * Add-Ons:: Add-on packages for AutoGen * Future:: Some ideas for the future. * Copying This Manual:: Copying This Manual * Concept Index:: General index * Function Index:: Function index @end menu @ignore * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @end ignore @page @node Introduction @chapter Introduction @cindex Introduction AutoGen is a tool designed for generating program files that contain repetitive text with varied substitutions. Its goal is to simplify the maintenance of programs that contain large amounts of repetitious text. This is especially valuable if there are several blocks of such text that must be kept synchronized in parallel tables. An obvious example is the problem of maintaining the code required for processing program options and configuration settings. Processing options requires a minimum of four different constructs be kept in proper order in different places in your program. You need at least: @enumerate @item The flag character in the flag string, @item code to process the flag when it is encountered, @item a global state variable or two, and @item a line in the usage text. @end enumerate @noindent You will need more things besides this if you choose to implement long option names, configuration (rc/ini) file processing, environment variable settings and keep all the documentation for these up to date. This can be done mechanically; with the proper templates and this program. In fact, it has already been done and AutoGen itself uses it@: @xref{AutoOpts}. For a simple example of Automated Option processing, @xref{Quick Start}. For a full list of the Automated Option features, @xref{Features}. Be forewarned, though, the feature list is ridiculously extensive. @menu * Generalities:: The Purpose of AutoGen * Example Usage:: A Simple Example * csh/zsh caveat:: csh/zsh caveat * Testimonial:: A User's Perspective @end menu @c === SECTION MARKER @node Generalities @section The Purpose of AutoGen The idea of this program is to have a text file, a template if you will, that contains the general text of the desired output file. That file includes substitution expressions and sections of text that are replicated under the control of separate definition files. @cindex design goals AutoGen was designed with the following features: @enumerate @item The definitions are completely separate from the template. By completely isolating the definitions from the template it greatly increases the flexibility of the template implementation. A secondary goal is that a template user only needs to specify those data that are necessary to describe his application of a template. @item Each datum in the definitions is named. Thus, the definitions can be rearranged, augmented and become obsolete without it being necessary to go back and clean up older definition files. Reduce incompatibilities! @item Every definition name defines an array of values, even when there is only one entry. These arrays of values are used to control the replication of sections of the template. @item There are named collections of definitions. They form a nested hierarchy. Associated values are collected and associated with a group name. These associated data are used collectively in sets of substitutions. @item The template has special markers to indicate where substitutions are required, much like the @code{$@{VAR@}} construct in a shell @code{here doc}. These markers are not fixed strings. They are specified at the start of each template. Template designers know best what fits into their syntax and can avoid marker conflicts. We did this because it is burdensome and difficult to avoid conflicts using either M4 tokenization or C preprocessor substitution rules. It also makes it easier to specify expressions that transform the value. Of course, our expressions are less cryptic than the shell methods. @item These same markers are used, in conjunction with enclosed keywords, to indicate sections of text that are to be skipped and for sections of text that are to be repeated. This is a major improvement over using C preprocessing macros. With the C preprocessor, you have no way of selecting output text because it is an @i{un}varying, mechanical substitution process. @item Finally, we supply methods for carefully controlling the output. Sometimes, it is just simply easier and clearer to compute some text or a value in one context when its application needs to be later. So, functions are available for saving text or values for later use. @end enumerate @c === SECTION MARKER @node Example Usage @section A Simple Example @cindex example, simple AutoGen This is just one simple example that shows a few basic features. If you are interested, you also may run "make check" with the @code{VERBOSE} environment variable set and see a number of other examples in the @file{agen5/test/testdir} directory. Assume you have an enumeration of names and you wish to associate some string with each name. Assume also, for the sake of this example, that it is either too complex or too large to maintain easily by hand. We will start by writing an abbreviated version of what the result is supposed to be. We will use that to construct our output templates. @noindent In a header file, @file{list.h}, you define the enumeration and the global array containing the associated strings: @example typedef enum @{ IDX_ALPHA, IDX_BETA, IDX_OMEGA @} list_enum; extern char const* az_name_list[ 3 ]; @end example @noindent Then you also have @file{list.c} that defines the actual strings: @example #include "list.h" char const* az_name_list[] = @{ "some alpha stuff", "more beta stuff", "final omega stuff" @}; @end example @noindent First, we will define the information that is unique for each enumeration name/string pair. This would be placed in a file named, @file{list.def}, for example. @example autogen definitions list; list = @{ list_element = alpha; list_info = "some alpha stuff"; @}; list = @{ list_info = "more beta stuff"; list_element = beta; @}; list = @{ list_element = omega; list_info = "final omega stuff"; @}; @end example The @code{autogen definitions list;} entry defines the file as an AutoGen definition file that uses a template named @code{list}. That is followed by three @code{list} entries that define the associations between the enumeration names and the strings. The order of the differently named elements inside of list is unimportant. They are reversed inside of the @code{beta} entry and the output is unaffected. Now, to actually create the output, we need a template or two that can be expanded into the files you want. In this program, we use a single template that is capable of multiple output files. The definitions above refer to a @file{list} template, so it would normally be named, @file{list.tpl}. It looks something like this. (For a full description, @xref{Template File}.) @example [+ AutoGen5 template h c +] [+ CASE (suffix) +][+ == h +] typedef enum @{[+ FOR list "," +] IDX_[+ (string-upcase! (get "list_element")) +][+ ENDFOR list +] @} list_enum; extern char const* az_name_list[ [+ (count "list") +] ]; [+ == c +] #include "list.h" char const* az_name_list[] = @{[+ FOR list "," +] "[+list_info+]"[+ ENDFOR list +] @};[+ ESAC +] @end example The @code{[+ AutoGen5 template h c +]} text tells AutoGen that this is an AutoGen version 5 template file; that it is to be processed twice; that the start macro marker is @code{[+}; and the end marker is @code{+]}. The template will be processed first with a suffix value of @code{h} and then with @code{c}. Normally, the suffix values are appended to the @file{base-name} to create the output file name. The @code{[+ == h +]} and @code{[+ == c +]} @code{CASE} selection clauses select different text for the two different passes. In this example, the output is nearly disjoint and could have been put in two separate templates. However, sometimes there are common sections and this is just an example. The @code{[+FOR list "," +]} and @code{[+ ENDFOR list +]} clauses delimit a block of text that will be repeated for every definition of @code{list}. Inside of that block, the definition name-value pairs that are members of each @code{list} are available for substitutions. The remainder of the macros are expressions. Some of these contain special expression functions that are dependent on AutoGen named values; others are simply Scheme expressions, the result of which will be inserted into the output text. Other expressions are names of AutoGen values. These values will be inserted into the output text. For example, @code{[+list_info+]} will result in the value associated with the name @code{list_info} being inserted between the double quotes and @code{(string-upcase! (get "list_element"))} will first "get" the value associated with the name @code{list_element}, then change the case of all the letters to upper case. The result will be inserted into the output document. If you have compiled AutoGen, you can copy out the template and definitions as described above and run @code{autogen list.def}. This will produce exactly the hypothesized desired output. One more point, too. Lets say you decided it was too much trouble to figure out how to use AutoGen, so you created this enumeration and string list with thousands of entries. Now, requirements have changed and it has become necessary to map a string containing the enumeration name into the enumeration number. With AutoGen, you just alter the template to emit the table of names. It will be guaranteed to be in the correct order, missing none of the entries. If you want to do that by hand, well, good luck. @c === SECTION MARKER @node csh/zsh caveat @section csh/zsh caveat AutoGen tries to use your normal shell so that you can supply shell code in a manner you are accustomed to using. If, however, you use csh or zsh, you cannot do this. Csh is sufficiently difficult to program that it is unsupported. Zsh, though largely programmable, also has some anomalies that make it incompatible with AutoGen usage. Therefore, when invoking AutoGen from these environments, you must be certain to set the SHELL environment variable to a Bourne-derived shell, e.g., sh, ksh or bash. Any shell you choose for your own scripts need to follow these basic requirements: @enumerate @item It handles @code{trap ":" $sig} without output to standard out. This is done when the server shell is first started. If your shell does not handle this, then it may be able to by loading functions from its start up files. @item At the beginning of each scriptlet, the command @code{\\cd $PWD} is inserted. This ensures that @code{cd} is not aliased to something peculiar and each scriptlet starts life in the execution directory. @item At the end of each scriptlet, the command @code{echo mumble} is appended. The program you use as a shell must emit the single argument @code{mumble} on a line by itself. @end enumerate @c === SECTION MARKER @node Testimonial @section A User's Perspective @format Alexandre wrote: > > I'd appreciate opinions from others about advantages/disadvantages of > each of these macro packages. @end format I am using AutoGen in my pet project, and find one of its best points to be that it separates the operational data from the implementation. Indulge me for a few paragraphs, and all will be revealed: In the manual, Bruce cites the example of maintaining command line flags inside the source code; traditionally spreading usage information, flag names, letters and processing across several functions (if not files). Investing the time in writing a sort of boiler plate (a template in AutoGen terminology) pays by moving all of the option details (usage, flags names etc.) into a well structured table (a definition file if you will), so that adding a new command line option becomes a simple matter of adding a set of details to the table. So far so good! Of course, now that there is a template, writing all of that tedious optargs processing and usage functions is no longer an issue. Creating a table of the options needed for the new project and running AutoGen generates all of the option processing code in C automatically from just the tabular data. AutoGen in fact already ships with such a template... AutoOpts. One final consequence of the good separation in the design of AutoGen is that it is retargetable to a greater extent. The egcs/gcc/fixinc/inclhack.def can equally be used (with different templates) to create a shell script (inclhack.sh) or a c program (fixincl.c). This is just the tip of the iceberg. AutoGen is far more powerful than these examples might indicate, and has many other varied uses. I am certain Bruce or I could supply you with many and varied examples, and I would heartily recommend that you try it for your project and see for yourself how it compares to m4. @cindex m4 As an aside, I would be interested to see whether someone might be persuaded to rationalise autoconf with AutoGen in place of m4... Ben, are you listening? autoconf-3.0! `kay? =)O| @format Sincerely, Gary V. Vaughan @end format @ignore * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @end ignore @page @node Definitions File @chapter Definitions File @cindex definitions file @cindex .def file This chapter describes the syntax and semantics of the AutoGen definition file. In order to instantiate a template, you normally must provide a definitions file that identifies itself and contains some value definitions. Consequently, we keep it very simple. For "advanced" users, there are preprocessing directives, sparse arrays, named indexes and comments that may be used as well. The definitions file is used to associate values with names. Every value is implicitly an array of values, even if there is only one value. Values may be either simple strings or compound collections of name-value pairs. An array may not contain both simple and compound members. Fundamentally, it is as simple as: @example prog-name = "autogen"; flag = @{ name = templ_dirs; value = L; descrip = "Template search directory list"; @}; @end example For purposes of commenting and controlling the processing of the definitions, C-style comments and most C preprocessing directives are honored. The major exception is that the @code{#if} directive is ignored, along with all following text through the matching @code{#endif} directive. The C preprocessor is not actually invoked, so C macro substitution is @strong{not} performed. @menu * Identification:: The Identification Definition * Definitions:: Named Definitions * Index Assignments:: Assigning an Index to a Definition * Dynamic Text:: Dynamic Text * Directives:: Controlling What Gets Processed * Predefines:: Pre-defined Names * Comments:: Commenting Your Definitions * Example:: What it all looks like. * Full Syntax:: Finite State Machine Grammar * Alternate Definition:: Alternate Definition Forms @end menu @c === SECTION MARKER @node Identification @section The Identification Definition @cindex identification The first definition in this file is used to identify it as a AutoGen file. It consists of the two keywords, @samp{autogen} and @samp{definitions} followed by the default template name and a terminating semi-colon (@code{;}). That is: @example AutoGen Definitions @var{template-name}; @end example @noindent Note that, other than the name @var{template-name}, the words @samp{AutoGen} and @samp{Definitions} are searched for without case sensitivity. Most lookups in this program are case insensitive. @noindent Also, if the input contains more identification definitions, they will be ignored. This is done so that you may include (@pxref{Directives}) other definition files without an identification conflict. @cindex template file @noindent AutoGen uses the name of the template to find the corresponding template file. It searches for the file in the following way, stopping when it finds the file: @enumerate @item It tries to open @file{./@var{template-name}}. If it fails, @item it tries @file{./@var{template-name}.tpl}. @item It searches for either of these files in the directories listed in the templ-dirs command line option. @end enumerate If AutoGen fails to find the template file in one of these places, it prints an error message and exits. @c === SECTION MARKER @node Definitions @section Named Definitions @cindex definitions A name is a sequence of characters beginning with an alphabetic character (@code{a} through @code{z}) followed by zero or more alpha-numeric characters and/or separator characters: hyphen (@code{-}), underscore (@code{_}) or carat (@code{^}). Names are case insensitive. Any name may have multiple values associated with it. Every name may be considered a sparse array of one or more elements. If there is more than one value, the values my be accessed by indexing the value with @code{[index]} or by iterating over them using the FOR (@pxref{FOR}) AutoGen macro on it, as described in the next chapter. Sparse arrays are specified by specifying an index when defining an entry (@pxref{Index Assignments,, Assigning an Index to a Definition}). There are two kinds of definitions, @samp{simple} and @samp{compound}. They are defined thus (@pxref{Full Syntax}): @example compound_name '=' '@{' definition-list '@}' ';' simple-name[2] '=' string ';' no^text^name ';' @end example @noindent @code{simple-name} has the third index (index number 2) defined here. @code{No^text^name} is a simple definition with a shorthand empty string value. The string values for definitions may be specified in any of several formation rules. @menu * def-list:: Definition List * double-quote-string:: Double Quote String * single-quote-string:: Single Quote String * simple-string:: An Unquoted String * shell-generated:: Shell Output String * scheme-generated:: Scheme Result String * here-string:: A Here String * concat-string:: Concatenated Strings @end menu @cindex simple definitions @cindex compound definitions @node def-list @subsection Definition List @code{definition-list} is a list of definitions that may or may not contain nested compound definitions. Any such definitions may @strong{only} be expanded within a @code{FOR} block iterating over the containing compound definition. @xref{FOR}. Here is, again, the example definitions from the previous chapter, with three additional name value pairs. Two with an empty value assigned (@var{first} and @var{last}), and a "global" @var{group_name}. @example autogen definitions list; group_name = example; list = @{ list_element = alpha; first; list_info = "some alpha stuff"; @}; list = @{ list_info = "more beta stuff"; list_element = beta; @}; list = @{ list_element = omega; last; list_info = "final omega stuff"; @}; @end example @node double-quote-string @subsection Double Quote String @cindex string, double quote The string follows the C-style escaping, using the backslash to quote (escape) the following character(s). Certain letters are translated to various control codes (e.g. @code{\n}, @code{\f}, @code{\t}, etc.). @code{x} introduces a two character hex code. @code{0} (the digit zero) introduces a one to three character octal code (note: an octal byte followed by a digit must be represented with three octal digits, thus: @code{"\0001"} yielding a NUL byte followed by the ASCII digit 1). Any other character following the backslash escape is simply inserted, without error, into the string being formed. Like ANSI "C", a series of these strings, possibly intermixed with single quote strings, will be concatenated together. @node single-quote-string @subsection Single Quote String @cindex string, single quote This is similar to the shell single-quote string. However, escapes @code{\} are honored before another escape, single quotes @code{'} and hash characters @code{#}. This latter is done specifically to disambiguate lines starting with a hash character inside of a quoted string. In other words, @example fumble = ' #endif '; @end example could be misinterpreted by the definitions scanner, whereas this would not: @example fumble = ' \#endif '; @end example @* As with the double quote string, a series of these, even intermixed with double quote strings, will be concatenated together. @node simple-string @subsection An Unquoted String A simple string that does not contain white space @i{may} be left unquoted. The string must not contain any of the characters special to the definition text (i.e., @code{"}, @code{#}, @code{'}, @code{(}, @code{)}, @code{,}, @code{;}, @code{<}, @code{=}, @code{>}, @code{[}, @code{]}, @code{`}, @code{@{}, or @code{@}}). This list is subject to change, but it will never contain underscore (@code{_}), period (@code{.}), slash (@code{/}), colon (@code{:}), hyphen (@code{-}) or backslash (@code{\\}). Basically, if the string looks like it is a normal DOS or UNIX file or variable name, and it is not one of two keywords (@samp{autogen} or @samp{definitions}) then it is OK to not quote it, otherwise you should. @node shell-generated @subsection Shell Output String @cindex shell-generated string @cindex string, shell output This is assembled according to the same rules as the double quote string, except that there is no concatenation of strings and the resulting string is written to a shell server process. The definition takes on the value of the output string. NB@: The text is interpreted by a server shell. There may be left over state from previous server shell processing. This scriptlet may also leave state for subsequent processing. However, a @code{cd} to the original directory is always issued before the new command is issued. @node scheme-generated @subsection Scheme Result String A scheme result string must begin with an open parenthesis @code{(}. The scheme expression will be evaluated by Guile and the value will be the result. The AutoGen expression functions are @strong{dis}abled at this stage, so do not use them. @node here-string @subsection A Here String @cindex here-string A @samp{here string} is formed in much the same way as a shell here doc. It is denoted with two less than characters(@code{<<}) and, optionally, a hyphen. This is followed by optional horizontal white space and an ending marker-identifier. This marker must follow the syntax rules for identifiers. Unlike the shell version, however, you must not quote this marker. The resulting string will start with the first character on the next line and continue up to but not including the newline that precedes the line that begins with the marker token. The characters are copied directly into the result string. Mostly. If a hyphen follows the less than characters, then leading tabs will be stripped and the terminating marker will be recognized even if preceded by tabs. Also, if the first character on the line (after removing tabs) is a backslash and the next character a tab, then the backslash will be removed as well. No other kind of processing is done on this string. Here are two examples: @example str1 = <<- STR_END $quotes = " ' ` STR_END; str2 = << STR_END $quotes = " ' ` STR_END; STR_END; @end example The first string contains no new line characters. The first character is the dollar sign, the last the back quote. The second string contains one new line character. The first character is the tab character preceding the dollar sign. The last character is the semicolon after the @code{STR_END}. That @code{STR_END} does not end the string because it is not at the beginning of the line. In the preceding case, the leading tab was stripped. @node concat-string @subsection Concatenated Strings @cindex concat-string If single or double quote characters are used, then you also have the option, a la ANSI-C syntax, of implicitly concatenating a series of them together, with intervening white space ignored. NB@: You @strong{cannot} use directives to alter the string content. That is, @example str = "fumble" #ifdef LATER "stumble" #endif ; @end example @noindent will result in a syntax error. The preprocessing directives are not carried out by the C preprocessor. However, @example str = '"fumble\n" #ifdef LATER " stumble\n" #endif '; @end example @noindent @strong{Will} work. It will enclose the @samp{#ifdef LATER} and @samp{#endif} in the string. But it may also wreak havoc with the definition processing directives. The hash characters in the first column should be disambiguated with an escape @code{\} or join them with previous lines: @code{"fumble\n#ifdef LATER...}. @c === SECTION MARKER @node Index Assignments @section Assigning an Index to a Definition @cindex Definition Index In AutoGen, every name is implicitly an array of values. When assigning values, they are usually implicitly assigned to the next highest slot. They can also be specified explicitly: @example mumble[9] = stumble; mumble[0] = grumble; @end example @noindent If, subsequently, you assign a value to @code{mumble} without an index, its index will be @code{10}, not @code{1}. If indexes are specified, they must not cause conflicts. @code{#define}-d names may also be used for index values. This is equivalent to the above: @example #define FIRST 0 #define LAST 9 mumble[LAST] = stumble; mumble[FIRST] = grumble; @end example All values in a range do @strong{not} have to be filled in. If you leave gaps, then you will have a sparse array. This is fine (@pxref{FOR}). You have your choice of iterating over all the defined values, or iterating over a range of slots. This: @example [+ FOR mumble +][+ ENDFOR +] @end example @noindent iterates over all and only the defined entries, whereas this: @example [+ FOR mumble (for-by 1) +][+ ENDFOR +] @end example @noindent will iterate over all 10 "slots". Your template will likely have to contain something like this: @example [+ IF (exist? (sprintf "mumble[%d]" (for-index))) +] @end example @noindent or else "mumble" will have to be a compound value that, say, always contains a "grumble" value: @example [+ IF (exist? "grumble") +] @end example @c === SECTION MARKER @node Dynamic Text @section Dynamic Text @cindex Dynamic Definition Text There are several methods for including dynamic content inside a definitions file. Three of them are mentioned above (@ref{shell-generated} and @pxref{scheme-generated}) in the discussion of string formation rules. Another method uses the @code{#shell} processing directive. It will be discussed in the next section (@pxref{Directives}). Guile/Scheme may also be used to yield to create definitions. When the Scheme expression is preceded by a backslash and single quote, then the expression is expected to be an alist of names and values that will be used to create AutoGen definitions. @noindent This method can be be used as follows: @example \'( (name (value-expression)) (name2 (another-expr)) ) @end example @noindent This is entirely equivalent to: @example name = (value-expression); name2 = (another-expr); @end example @noindent Under the covers, the expression gets handed off to a Guile function named @code{alist->autogen-def} in an expression that looks like this: @example (alist->autogen-def ( (name (value-expression)) (name2 (another-expr)) ) ) @end example @node Directives @section Controlling What Gets Processed @cindex directives Definition processing directives can @strong{only} be processed if the '#' character is the first character on a line. Also, if you want a '#' as the first character of a line in one of your string assignments, you should either escape it by preceding it with a backslash @samp{\}, or by embedding it in the string as in @code{"\n#"}. All of the normal C preprocessing directives are recognized, though several are ignored. There is also an additional @code{#shell} - @code{#endshell} pair. Another minor difference is that AutoGen directives must have the hash character (@code{#}) in column 1. The final tweak is that @code{#!} is treated as a comment line. Using this feature, you can use: @samp{#! /usr/local/bin/autogen} as the first line of a definitions file, set the mode to executable and "run" the definitions file as if it were a direct invocation of AutoGen. This was done for its hack value. The ignored directives are: @code{#ident}, @code{#let}, @code{#pragma}, and @code{#if}. Note that when ignoring the @code{#if} directive, all intervening text through its matching @code{#endif} is also ignored, including the @code{#else} clause. The AutoGen directives that affect the processing of definitions are: @table @code @item #assert `shell-script` | (scheme-expr) | @cindex #assert @cindex assert directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 406. @end ignore If the @code{shell-script} or @code{scheme-expr} do not yield @code{true} valued results, autogen will be aborted. If @code{} or nothing at all is provided, then this directive is ignored. When writing the shell script, remember this is on a preprocessing line. Multiple lines must be backslash continued and the result is a single long line. Separate multiple commands with semi-colons. The result is @code{false} (and fails) if the result is empty, the number zero, or a string that starts with the letters 'n' or 'f' ("no" or "false"). @item #define name [ ] @cindex #define @cindex define directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 469. @end ignore Will add the name to the define list as if it were a DEFINE program argument. Its value will be the first non-whitespace token following the name. Quotes are @strong{not} processed. After the definitions file has been processed, any remaining entries in the define list will be added to the environment. @item #elif @cindex #elif @cindex elif directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 542. @end ignore This must follow an @code{#if} otherwise it will generate an error. It will be ignored. @item #else @cindex #else @cindex else directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 560. @end ignore This must follow an @code{#if}, @code{#ifdef} or @code{#ifndef}. If it follows the @code{#if}, then it will be ignored. Otherwise, it will change the processing state to the reverse of what it was. @item #endif @cindex #endif @cindex endif directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 578. @end ignore This must follow an @code{#if}, @code{#ifdef} or @code{#ifndef}. In all cases, this will resume normal processing of text. @item #endmac @cindex #endmac @cindex endmac directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 595. @end ignore This terminates a "macdef", but must not ever be encountered directly. @item #endshell @cindex #endshell @cindex endshell directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 611. @end ignore Ends the text processed by a command shell into autogen definitions. @item #error [ ] @cindex #error @cindex error directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 631. @end ignore This directive will cause AutoGen to stop processing and exit with a status of EXIT_FAILURE. @item #if [ ] @cindex #if @cindex if directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 656. @end ignore @code{#if} expressions are not analyzed. @strong{Everything} from here to the matching @code{#endif} is skipped. @item #ifdef name-to-test @cindex #ifdef @cindex ifdef directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 673. @end ignore The definitions that follow, up to the matching @code{#endif} will be processed only if there is a corresponding @code{-Dname} command line option or if a @code{#define} of that name has been previously encountered. @item #ifndef name-to-test @cindex #ifndef @cindex ifndef directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 692. @end ignore The definitions that follow, up to the matching @code{#endif} will be processed only if there is @strong{not} a corresponding @code{-Dname} command line option or there was a canceling @code{-Uname} option. @item #include unadorned-file-name @cindex #include @cindex include directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 711. @end ignore This directive will insert definitions from another file into the current collection. If the file name is adorned with double quotes or angle brackets (as in a C program), then the include is ignored. @item #line @cindex #line @cindex line directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 829. @end ignore Alters the current line number and/or file name. You may wish to use this directive if you extract definition source from other files. @command{getdefs} uses this mechanism so AutoGen will report the correct file and approximate line number of any errors found in extracted definitions. @item #macdef @cindex #macdef @cindex macdef directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 873. @end ignore This is a new AT&T research preprocessing directive. Basically, it is a multi-line #define that may include other preprocessing directives. @item #option opt-name [ ] @cindex #option @cindex option directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 888. @end ignore This directive will pass the option name and associated text to the AutoOpts optionLoadLine routine (@pxref{libopts-optionLoadLine}). The option text may span multiple lines by continuing them with a backslash. The backslash/newline pair will be replaced with two space characters. This directive may be used to set a search path for locating template files For example, this: @example #option templ-dirs $ENVVAR/dirname @end example @noindent will direct autogen to use the @code{ENVVAR} environment variable to find a directory named @code{dirname} that (may) contain templates. Since these directories are searched in most recently supplied first order, search directories supplied in this way will be searched before any supplied on the command line. @item #shell @cindex #shell @cindex shell directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 925. @end ignore Invokes @code{$SHELL} or @file{/bin/sh} on a script that should generate AutoGen definitions. It does this using the same server process that handles the back-quoted @code{`} text. @strong{CAUTION}@: let not your @code{$SHELL} be @code{csh}. @item #undef name-to-undefine @cindex #undef @cindex undef directive @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/defDirect.c line 1025. @end ignore Will remove any entries from the define list that match the undef name pattern. @end table @ignore START == COMMENTS == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @ignore Resume input from autogen.texi @end ignore @c === SECTION MARKER @node Predefines @section Pre-defined Names @cindex predefines When AutoGen starts, it tries to determine several names from the operating environment and put them into environment variables for use in both @code{#ifdef} tests in the definitions files and in shell scripts with environment variable tests. @code{__autogen__} is always defined. For other names, AutoGen will first try to use the POSIX version of the @code{sysinfo(2)} system call. Failing that, it will try for the POSIX @code{uname(2)} call. If neither is available, then only "@code{__autogen__}" will be inserted into the environment. In all cases, the associated names are converted to lower case, surrounded by doubled underscores and non-symbol characters are replaced with underscores. With Solaris on a sparc platform, @code{sysinfo(2)} is available. The following strings are used: @itemize @bullet @item @code{SI_SYSNAME} (e.g., "__sunos__") @item @code{SI_HOSTNAME} (e.g., "__ellen__") @item @code{SI_ARCHITECTURE} (e.g., "__sparc__") @item @code{SI_HW_PROVIDER} (e.g., "__sun_microsystems__") @item @code{SI_PLATFORM} (e.g., "__sun_ultra_5_10__") @item @code{SI_MACHINE} (e.g., "__sun4u__") @end itemize For Linux and other operating systems that only support the @code{uname(2)} call, AutoGen will use these values: @itemize @bullet @item @code{sysname} (e.g., "__linux__") @item @code{machine} (e.g., "__i586__") @item @code{nodename} (e.g., "__bach__") @end itemize By testing these pre-defines in my definitions, you can select pieces of the definitions without resorting to writing shell scripts that parse the output of @code{uname(1)}. You can also segregate real C code from autogen definitions by testing for "@code{__autogen__}". @example #ifdef __bach__ location = home; #else location = work; #endif @end example @c === SECTION MARKER @node Comments @section Commenting Your Definitions @cindex comments The definitions file may contain C and C++ style comments. @example /* * This is a comment. It continues for several lines and closes * when the characters '*' and '/' appear together. */ // this comment is a single line comment @end example @c === SECTION MARKER @node Example @section What it all looks like. @noindent This is an extended example: @example autogen definitions @samp{template-name}; /* * This is a comment that describes what these * definitions are all about. */ global = "value for a global text definition."; /* * Include a standard set of definitions */ #include standards.def a_block = @{ a_field; a_subblock = @{ sub_name = first; sub_field = "sub value."; @}; #ifdef FEATURE a_subblock = @{ sub_name = second; @}; #endif @}; @end example @ignore END == COMMENTS == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @node Full Syntax @section Finite State Machine Grammar The preprocessing directives and comments are not part of the grammar. They are handled by the scanner/lexer. The following was extracted directly from the generated defParse-fsm.c source file. The "EVT:" is the token seen, the "STATE:" is the current state and the entries in this table describe the next state and the action to take. Invalid transitions were removed from the table. @ignore Extracted from $top_srcdir/agen5/defParse.y @end ignore @example dp_trans_table[ DP_STATE_CT ][ DP_EVENT_CT ] = @{ /* STATE 0: DP_ST_INIT */ @{ @{ DP_ST_NEED_DEF, NULL @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 1: DP_ST_NEED_DEF */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_NEED_TPL, NULL @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 2: DP_ST_NEED_TPL */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_NEED_SEMI, dp_do_tpl_name @}, /* EVT: VAR_NAME */ @{ DP_ST_NEED_SEMI, dp_do_tpl_name @}, /* EVT: OTHER_NAME */ @{ DP_ST_NEED_SEMI, dp_do_tpl_name @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 3: DP_ST_NEED_SEMI */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_NEED_NAME, NULL @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 4: DP_ST_NEED_NAME */ @{ @{ DP_ST_NEED_DEF, NULL @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_DONE, dp_do_need_name_end @}, /* EVT: End-Of-File */ @{ DP_ST_HAVE_NAME, dp_do_need_name_var_name @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_HAVE_VALUE, dp_do_end_block @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 5: DP_ST_HAVE_NAME */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_NEED_NAME, dp_do_empty_val @}, /* EVT: ; */ @{ DP_ST_NEED_VALUE, dp_do_have_name_lit_eq @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_NEED_IDX, NULL @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 6: DP_ST_NEED_VALUE */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_HAVE_VALUE, dp_do_str_value @}, /* EVT: VAR_NAME */ @{ DP_ST_HAVE_VALUE, dp_do_str_value @}, /* EVT: OTHER_NAME */ @{ DP_ST_HAVE_VALUE, dp_do_str_value @}, /* EVT: STRING */ @{ DP_ST_HAVE_VALUE, dp_do_str_value @}, /* EVT: HERE_STRING */ @{ DP_ST_HAVE_VALUE, dp_do_str_value @}, /* EVT: NUMBER */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_NEED_NAME, dp_do_start_block @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 7: DP_ST_NEED_IDX */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_NEED_CBKT, dp_do_indexed_name @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_NEED_CBKT, dp_do_indexed_name @}, /* EVT: NUMBER */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 8: DP_ST_NEED_CBKT */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INDX_NAME, NULL @} /* EVT: ] */ /* STATE 9: DP_ST_INDX_NAME */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_NEED_NAME, dp_do_empty_val @}, /* EVT: ; */ @{ DP_ST_NEED_VALUE, NULL @}, /* EVT: = */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ /* STATE 10: DP_ST_HAVE_VALUE */ @{ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: AUTOGEN */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: DEFINITIONS */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: End-Of-File */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: VAR_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: OTHER_NAME */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: HERE_STRING */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: NUMBER */ @{ DP_ST_NEED_NAME, NULL @}, /* EVT: ; */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: = */ @{ DP_ST_NEED_VALUE, dp_do_next_val @}, /* EVT: , */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @{ */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: @} */ @{ DP_ST_INVALID, dp_do_invalid @}, /* EVT: [ */ @{ DP_ST_INVALID, dp_do_invalid @} /* EVT: ] */ @end example @ignore START == TEMPLATE == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @c === SECTION MARKER @node Alternate Definition @section Alternate Definition Forms @cindex Alternate Definition There are several methods for supplying data values for templates. @table @samp @item no definitions It is entirely possible to write a template that does not depend upon external definitions. Such a template would likely have an unvarying output, but be convenient nonetheless because of an external library of either AutoGen or Scheme functions, or both. This can be accommodated by providing the @code{--override-tpl} and @code{--no-definitions} options on the command line. @xref{autogen Invocation}. @item CGI AutoGen behaves as a CGI server if the definitions input is from stdin and the environment variable @code{REQUEST_METHOD} is defined and set to either "GET" or "POST", @xref{AutoGen CGI}. Obviously, all the values are constrained to strings because there is no way to represent nested values. @item XML AutoGen comes with a program named, @code{xml2ag}. Its output can either be redirected to a file for later use, or the program can be used as an AutoGen wrapper. @xref{xml2ag Invocation}. The introductory template example (@pxref{Example Usage}) can be rewritten in XML as follows: @example @end example A more XML-normal form might look like this: @example some alpha stuff more beta stuff final omega stuff @end example @noindent but you would have to change the template @code{list_info} references into @code{text} references. @item standard AutoGen definitions Of course. :-) @end table @ignore * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @end ignore @page @node Template File @chapter Template File @cindex template file @cindex .tpl file The AutoGen template file defines the content of the output text. It is composed of two parts. The first part consists of a pseudo macro invocation and commentary. It is followed by the template proper. @cindex pseudo macro @cindex macro, pseudo This pseudo macro is special. It is used to identify the file as a AutoGen template file, fixing the starting and ending marks for the macro invocations in the rest of the file, specifying the list of suffixes to be generated by the template and, optionally, the shell to use for processing shell commands embedded in the template. AutoGen-ing a file consists of copying text from the template to the output file until a start macro marker is found. The text from the start marker to the end marker constitutes the macro text. AutoGen macros may cause sections of the template to be skipped or processed several times. The process continues until the end of the template is reached. The process is repeated once for each suffix specified in the pseudo macro. This chapter describes the format of the AutoGen template macros and the usage of the AutoGen native macros. Users may augment these by defining their own macros, @xref{DEFINE}. @menu * pseudo macro:: Format of the Pseudo Macro * naming values:: Naming a value * expression syntax:: Macro Expression Syntax * AutoGen Functions:: AutoGen Scheme Functions * Common Functions:: Common Scheme Functions * native macros:: AutoGen Native Macros * output controls:: Redirecting Output @end menu @c === SECTION MARKER @node pseudo macro @section Format of the Pseudo Macro @cindex pseudo macro The pseudo macro is used to tell AutoGen how to process a template. It tells autogen: @enumerate @item The start macro marker. It consists of punctuation characters used to demarcate the start of a macro. It may be up to seven characters long and must be the first non-whitespace characters in the file. @noindent It is generally a good idea to use some sort of opening bracket in the starting macro and closing bracket in the ending macro (e.g. @code{@{}, @code{(}, @code{[}, or even @code{<} in the starting macro). It helps both visually and with editors capable of finding a balancing parenthesis. @item That start marker must be immediately followed by the identifier strings "AutoGen5" and then "template", though capitalization is not important. @end enumerate @noindent The next several components may be intermingled: @enumerate 3 @item Zero, one or more suffix specifications tell AutoGen how many times to process the template file. No suffix specifications mean that it is to be processed once and that the generated text is to be written to @file{stdout}. The current suffix for each pass can be determined with the @code{(suffix)} scheme function (@pxref{SCM suffix}). The suffix specification consists of a sequence of POSIX compliant file name characters and, optionally, an equal sign and a file name formatting specification. That specification may be either an ordinary sequence of file name characters with zero, one or two "%s" formatting sequences in it, or else it may be a Scheme expression that, when evaluated, produces such a string. The Scheme result may not be empty. The two string arguments allowed for that string are the base name of the definition file, and the current suffix (that being the text to the left of the equal sign). (Note: "POSIX compliant file name characters" consist of alphanumerics plus the period (@code{.}), hyphen (@code{-}) and underscore (@code{_}) characters.) If the suffix begins with one of these three latter characters and a formatting string is not specified, then that character is presumed to be the suffix separator. Otherwise, without a specified format string, a single period will separate the suffix from the base name in constructing the output file name. @item Shell specification: to specify that the template was written expecting a particular shell to run the shell commands. By default, the shell used is the autoconf-ed @code{CONFIG_SHELL}. This will usually be @file{/bin/sh}. The shell is specified by a hash mark (@code{#}) followed by an exclamation mark (@code{!}) followed by a full-path file name (e.g. @file{/usr/xpg4/bin/sh} on Solaris): @example [= Autogen5 Template c #!/usr/xpg4/bin/sh =] @end example @item Comments: blank lines, lines starting with a hash mark (@code{#}) and not specifying a shell, and edit mode markers (text between pairs of @code{-*-} strings) are all treated as comments. @item Some scheme expressions may be inserted in order to make configuration changes before template processing begins. ``@i{before template processing begins}'' means that there is no current output file, no current suffix and, basically, none of the AutoGen specific functions (@pxref{AutoGen Functions}) may be invoked. The scheme expression can also be used, for example, to save a pre-existing output file for later text extraction (@pxref{SCM extract}). @example (shellf "mv -f %1$s.c %1$s.sav" (base-name)) @end example @end enumerate @noindent After these must come the end macro marker: @enumerate 6 @item The punctuation characters used to demarcate the end of a macro. Like the start marker, it must consist of seven or fewer punctuation characters. @end enumerate The ending macro marker has a few constraints on its content. Some of them are just advisory, though. There is no special check for advisory restrictions. @itemize @bullet @item It must not begin with a POSIX file name character (hyphen @code{-}, underscore @code{_} or period @code{.}), the backslash (@code{\}) or open parenthesis (@code{(}). These are used to identify a suffix specification, indicate Scheme code and trim white space. @item If it begins with an equal sign, then it must be separated from any suffix specification by white space. @item The closing marker may not begin with an open parenthesis, as that is used to enclose a scheme expression. @item It cannot begin with a backslash, as that is used to indicate white space trimming after the end macro mark. If, in the body of the template, you put the backslash character (@code{\}) before the end macro mark, then any white space characters after the mark and through the newline character are trimmed. @item It is also helpful to avoid using the comment marker (@code{#}). It might be seen as a comment within the pseudo macro. @item You should avoid using any of the quote characters@: double, single or back-quote. It won't confuse AutoGen, but it might well confuse you and/or your editor. @end itemize As an example, assume we want to use @code{[+} and @code{+]} as the start and end macro markers, and we wish to produce a @file{.c} and a @file{.h} file, then the pseudo macro might look something like this: @example [+ AutoGen5 template -*- Mode: emacs-mode-of-choice -*- h=chk-%s.h c # make sure we don't use csh: (setenv "SHELL" "/bin/sh") +] @end example The template proper starts after the pseudo-macro. The starting character is either the first non-whitespace character or the first character after the newline that follows the end macro marker. @c === SECTION MARKER @node naming values @section Naming a value @cindex naming values When an AutoGen value is specified in a template, it is specified by name. The name may be a simple name, or a compound name of several components. Since each named value in AutoGen is implicitly an array of one or more values, each component may have an index associated with it. @noindent It looks like this: @example comp-name-1 . comp-name-2 [ 2 ] @end example Note that if there are multiple components to a name, each component name is separated by a dot (@code{.}). Indexes follow a component name, enclosed in square brackets (@code{[} and @code{]}). The index may be either an integer or an integer-valued define name. The first component of the name is searched for in the current definition level. If not found, higher levels will be searched until either a value is found, or there are no more definition levels. Subsequent components of the name must be found within the context of the newly-current definition level. Also, if the named value is prefixed by a dot (@code{.}), @cindex . then the value search is started in the current context only. Backtracking @cindex backtrack into other definition levels is prevented. If someone rewrites this, I'll incorporate it. :-) @c === SECTION MARKER @node expression syntax @section Macro Expression Syntax @cindex expression syntax AutoGen has two types of expressions: full expressions and basic ones. A full AutoGen expression can appear by itself, or as the argument to certain AutoGen built-in macros: CASE, IF, ELIF, INCLUDE, INVOKE (explicit invocation, @pxref{INVOKE}), and WHILE. If it appears by itself, the result is inserted into the output. If it is an argument to one of these macros, the macro code will act on it sensibly. You are constrained to basic expressions only when passing arguments to user defined macros, @xref{DEFINE}. The syntax of a full AutoGen expression is: @example [[ ] ] [ [ ]] @end example How the expression is evaluated depends upon the presence or absence of the apply code and value name. The "value name" is the name of an AutoGen defined value, or not. If it does not name such a value, the expression result is generally the empty string. All expressions must contain either a @code{value-name} or a @code{basic-expr}. @menu * apply code:: Apply Code * basic expression:: Basic Expression @end menu @node apply code @subsection Apply Code The "apply code" selected determines the method of evaluating the expression. There are five apply codes, including the non-use of an apply code. @table @samp @item no apply code This is the most common expression type. Expressions of this sort come in three flavors: @table @samp @item The result is the value of @code{value-name}, if defined. Otherwise it is the empty string. @item The result of the basic expression is the result of the full expression, @xref{basic expression}. @item If there is a defined value for @code{value-name}, then the @code{basic-expr} is evaluated. Otherwise, the result is the empty string. @end table @item % If @code{value-name} is defined, use @code{basic-expr} as a format string for sprintf. Then, if the @code{basic-expr} is either a back-quoted string or a parenthesized expression, then hand the result to the appropriate interpreter for further evaluation. Otherwise, for single and double quote strings, the result is the result of the sprintf operation. Naturally, if @code{value-name} is not defined, the result is the empty string. For example, assume that @code{fumble} had the string value, @code{stumble}: @example [+ % fumble `printf '%%x\\n' $%s` +] @end example This would cause the shell to evaluate "@code{printf '%x\n' $stumble}". Assuming that the shell variable @code{stumble} had a numeric value, the expression result would be that number, in hex. Note the need for doubled percent characters and backslashes. @item ? Two @code{basic-expr}-s are required. If the @code{value-name} is defined, then the first @code{basic-expr-1} is evaluated, otherwise @code{basic-expr-2} is. @item - Evaluate @code{basic-expr} only if @code{value-name} is @i{not} defined. @item ?% This combines the functions of @samp{?} and @samp{%}. If @code{value-name} is defined, it behaves exactly like @samp{%}, above, using @code{basic-expr-1}. If not defined, then @code{basic-expr-2} is evaluated. For example, assume again that @code{fumble} had the string value, @code{stumble}: @example [+ ?% fumble `cat $%s` `pwd` +] @end example This would cause the shell to evaluate "@code{cat $stumble}". If @code{fumble} were not defined, then the result would be the name of our current directory. @end table @node basic expression @subsection Basic Expression A basic expression can have one of the following forms: @table @samp @item 'STRING' A single quoted string. Backslashes can be used to protect single quotes (@code{'}), hash characters (@code{#}), or backslashes (@code{\}) in the string. All other characters of STRING are output as-is when the single quoted string is evaluated. Backslashes are processed before the hash character for consistency with the definition syntax. It is needed there to avoid preprocessing conflicts. @item "STRING" A double quoted string. This is a cooked text string as in C, except that they are not concatenated with adjacent strings. Evaluating "@code{STRING}" will output STRING with all backslash sequences interpreted. @item `STRING` A back quoted string. When this expression is evaluated, STRING is first interpreted as a cooked string (as in `"STRING"') and evaluated as a shell expression by the AutoGen server shell. This expression is replaced by the @file{stdout} output of the shell. @item (STRING) A parenthesized expression. It will be passed to the Guile interpreter for evaluation and replaced by the resulting value. If there is a Scheme error in this expression, Guile 1.4 and Guile 1.6 will report the template line number where the error occurs. Guile 1.7 has lost this capability. Guile has the capability of creating and manipulating variables that can be referenced later on in the template processing. If you define such a variable, it is invisible to AutoGen. To reference its value, you must use a Guile expression. For example, @example [+ (define my-var "some-string-value") +] @end example can have that string inserted later, but only as in: @example [+ (. my-var) +] @end example Additionally, other than in the @code{%} and @code{?%} expressions, the Guile expressions may be introduced with the Guile comment character (@code{;}) and you may put a series of Guile expressions within a single macro. They will be implicitly evaluated as if they were arguments to the @code{(begin ...)} expression. The result will be the result of the last Guile expression evaluated. @end table @ignore END == TEMPLATE == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @ignore * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @end ignore @page @node AutoGen Functions @section AutoGen Scheme Functions AutoGen uses Guile to interpret Scheme expressions within AutoGen macros. All of the normal Guile functions are available, plus several extensions (@pxref{Common Functions}) have been added to augment the repertoire of string manipulation functions and manage the state of AutoGen processing. This section describes those functions that are specific to AutoGen. Please take note that these AutoGen specific functions are not loaded and thus not made available until after the command line options have been processed and the AutoGen definitions have been loaded. They may, of course, be used in Scheme functions that get defined at those times, but they cannot be invoked. @menu * SCM ag-fprintf:: @file{ag-fprintf} - format to autogen stream * SCM ag-function?:: @file{ag-function?} - test for function * SCM base-name:: @file{base-name} - base output name * SCM chdir:: @file{chdir} - Change current directory * SCM count:: @file{count} - definition count * SCM def-file:: @file{def-file} - definitions file name * SCM def-file-line:: @file{def-file-line} - get a definition file+line number * SCM dne:: @file{dne} - "Do Not Edit" warning * SCM emit:: @file{emit} - emit the text for each argument * SCM emit-string-table:: @file{emit-string-table} - output a string table * SCM error:: @file{error} - display message and exit * SCM exist?:: @file{exist?} - test for value name * SCM find-file:: @file{find-file} - locate a file in the search path * SCM first-for?:: @file{first-for?} - detect first iteration * SCM for-by:: @file{for-by} - set iteration step * SCM for-from:: @file{for-from} - set initial index * SCM for-index:: @file{for-index} - get current loop index * SCM for-sep:: @file{for-sep} - set loop separation string * SCM for-to:: @file{for-to} - set ending index * SCM get:: @file{get} - get named value * SCM get-c-name:: @file{get-c-name} - get named value, mapped to C name syntax * SCM get-down-name:: @file{get-down-name} - get lower cased named value, mapped to C name syntax * SCM get-up-name:: @file{get-up-name} - get upper cased named value, mapped to C name syntax * SCM high-lim:: @file{high-lim} - get highest value index * SCM last-for?:: @file{last-for?} - detect last iteration * SCM len:: @file{len} - get count of values * SCM low-lim:: @file{low-lim} - get lowest value index * SCM make-header-guard:: @file{make-header-guard} - make self-inclusion guard * SCM make-tmp-dir:: @file{make-tmp-dir} - create a temporary directory * SCM match-value?:: @file{match-value?} - test for matching value * SCM out-delete:: @file{out-delete} - delete current output file * SCM out-depth:: @file{out-depth} - output file stack depth * SCM out-emit-suspended:: @file{out-emit-suspended} - emit the text of suspended output * SCM out-line:: @file{out-line} - output file line number * SCM out-move:: @file{out-move} - change name of output file * SCM out-name:: @file{out-name} - current output file name * SCM out-pop:: @file{out-pop} - close current output file * SCM out-push-add:: @file{out-push-add} - append output to file * SCM out-push-new:: @file{out-push-new} - purge and create output file * SCM out-resume:: @file{out-resume} - resume suspended output file * SCM out-suspend:: @file{out-suspend} - suspend current output file * SCM out-switch:: @file{out-switch} - close and create new output * SCM output-file-next-line:: @file{output-file-next-line} - print the file name and next line number * SCM set-option:: @file{set-option} - Set a command line option * SCM set-writable:: @file{set-writable} - Make the output file be writable * SCM stack:: @file{stack} - make list of AutoGen values * SCM stack-join:: @file{stack-join} - stack values then join them * SCM suffix:: @file{suffix} - get the current suffix * SCM tpl-file:: @file{tpl-file} - get the template file name * SCM tpl-file-line:: @file{tpl-file-line} - get the template file+line number * SCM tpl-file-next-line:: @file{tpl-file-next-line} - get the template file plus next line number * SCM autogen-version:: @file{autogen-version} - ``5.16.2'' * SCM c-file-line-fmt:: format file info as, ``@code{#line nn "file"}'' @end menu @node SCM ag-fprintf @subsection @file{ag-fprintf} - format to autogen stream @findex ag-fprintf @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 444. @end ignore Usage: (ag-fprintf ag-diversion format [ format-arg ... ]) @* Format a string using arguments from the alist. Write to a specified AutoGen diversion. That may be either a specified suspended output stream (@pxref{SCM out-suspend}) or an index into the output stack (@pxref{SCM out-push-new}). @code{(ag-fprintf 0 ...)} is equivalent to @code{(emit (sprintf ...))}, and @code{(ag-fprintf 1 ...)} sends output to the most recently suspended output stream. Arguments: @* ag-diversion - AutoGen diversion name or number @* format - formatting string @* format-arg - Optional - list of arguments to formatting string @node SCM ag-function? @subsection @file{ag-function?} - test for function @findex ag-function? @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 379. @end ignore Usage: (ag-function? ag-name) @* return SCM_BOOL_T if a specified name is a user-defined AutoGen macro, otherwise return SCM_BOOL_F. Arguments: @* ag-name - name of AutoGen macro @node SCM base-name @subsection @file{base-name} - base output name @findex base-name @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 213. @end ignore Usage: (base-name) @* Returns a string containing the base name of the output file(s). Generally, this is also the base name of the definitions file. This Scheme function takes no arguments. @node SCM chdir @subsection @file{chdir} - Change current directory @findex chdir @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/agShell.c line 26. @end ignore Usage: (chdir dir) @* Sets the current directory for AutoGen. Shell commands will run from this directory as well. This is a wrapper around the Guile native function. It returns its directory name argument and fails the program on failure. Arguments: @* dir - new directory name @node SCM count @subsection @file{count} - definition count @findex count @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 308. @end ignore Usage: (count ag-name) @* Count the number of entries for a definition. The input argument must be a string containing the name of the AutoGen values to be counted. If there is no value associated with the name, the result is an SCM immediate integer value of zero. Arguments: @* ag-name - name of AutoGen value @node SCM def-file @subsection @file{def-file} - definitions file name @findex def-file @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 329. @end ignore Usage: (def-file) @* Get the name of the definitions file. Returns the name of the source file containing the AutoGen definitions. This Scheme function takes no arguments. @node SCM def-file-line @subsection @file{def-file-line} - get a definition file+line number @findex def-file-line @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 754. @end ignore Usage: (def-file-line ag-name [ msg-fmt ]) @* Returns the file and line number of a AutoGen defined value, using either the default format, "from %s line %d", or else the format you supply. For example, if you want to insert a "C" language file-line directive, you would supply the format "# %2$d \"%1$s\"", but that is also already supplied with the scheme variable @xref{SCM c-file-line-fmt}. You may use it thus: @example (def-file-line "ag-def-name" c-file-line-fmt) @end example It is also safe to use the formatting string, "%2$d". AutoGen uses an argument vector version of printf: @xref{snprintfv}. Arguments: @* ag-name - name of AutoGen value @* msg-fmt - Optional - formatting for line message @node SCM dne @subsection @file{dne} - "Do Not Edit" warning @findex dne @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 33. @end ignore Usage: (dne prefix [ first_prefix ] [ optpfx ]) @* Generate a "DO NOT EDIT" or "EDIT WITH CARE" warning string. Which depends on whether or not the @code{--writable} command line option was set. The first argument may be an option: -d This will suppress the variable text (date and version information). If specified, then the "prefix" and "first" arguments are shifted to the next arguments. The first argument is a per-line string prefix. The optional second argument is a prefix for the first-line and, in read-only mode, activates the editor hints. @* @example -*- buffer-read-only: t -*- vi: set ro: @end example @noindent The warning string also includes information about the template used to construct the file and the definitions used in its instantiation. The optional third argument is used when the first argument is actually an invocation option and the prefix arguments get shifted. The first argument must be, specifically, "@code{-d}". That is used to signify that the date stamp should not be inserted into the output. Arguments: @* prefix - string for starting each output line @* first_prefix - Optional - for the first output line @* optpfx - Optional - shifted prefix @node SCM emit @subsection @file{emit} - emit the text for each argument @findex emit @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcEval.c line 323. @end ignore Usage: (emit alist ...) @* Walk the tree of arguments, displaying the values of displayable SCM types. EXCEPTION: if the first argument is a number, then that number is used to index the output stack. "0" is the default, the current output. Arguments: @* alist - list of arguments to stringify and emit @node SCM emit-string-table @subsection @file{emit-string-table} - output a string table @findex emit-string-table @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/schemedef.scm line 279. @end ignore Usage: (emit-string-table st-name) @* Emit into the current output stream a @code{static char const} array named @code{st-name} that will have @code{NUL} bytes between each inserted string. Arguments: @* st-name - the name of the array of characters @node SCM error @subsection @file{error} - display message and exit @findex error @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 160. @end ignore Usage: (error message) @* The argument is a string that printed out as part of an error message. The message is formed from the formatting string: @example DEFINITIONS ERROR in %s line %d for %s: %s\n @end example The first three arguments to this format are provided by the routine and are: The name of the template file, the line within the template where the error was found, and the current output file name. After displaying the message, the current output file is removed and autogen exits with the EXIT_FAILURE error code. IF, however, the argument begins with the number 0 (zero), or the string is the empty string, then processing continues with the next suffix. Arguments: @* message - message to display before exiting @node SCM exist? @subsection @file{exist?} - test for value name @findex exist? @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 344. @end ignore Usage: (exist? ag-name) @* return SCM_BOOL_T iff a specified name has an AutoGen value. The name may include indexes and/or member names. All but the last member name must be an aggregate definition. For example: @example (exist? "foo[3].bar.baz") @end example will yield true if all of the following is true: @* There is a member value of either group or string type named @code{baz} for some group value @code{bar} that is a member of the @code{foo} group with index @code{3}. There may be multiple entries of @code{bar} within @code{foo}, only one needs to contain a value for @code{baz}. Arguments: @* ag-name - name of AutoGen value @node SCM find-file @subsection @file{find-file} - locate a file in the search path @findex find-file @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expExtract.c line 313. @end ignore Usage: (find-file file-name [ suffix ]) @* AutoGen has a search path that it uses to locate template and definition files. This function will search the same list for @file{file-name}, both with and without the @file{.suffix}, if provided. Arguments: @* file-name - name of file with text @* suffix - Optional - file suffix to try, too @node SCM first-for? @subsection @file{first-for?} - detect first iteration @findex first-for? @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 79. @end ignore Usage: (first-for? [ for_var ]) @* Returns @code{SCM_BOOL_T} if the named FOR loop (or, if not named, the current innermost loop) is on the first pass through the data. Outside of any @code{FOR} loop, it returns @code{SCM_UNDEFINED}, @pxref{FOR}. Arguments: @* for_var - Optional - which for loop @node SCM for-by @subsection @file{for-by} - set iteration step @findex for-by @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 189. @end ignore Usage: (for-by by) @* This function records the "step by" information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. @xref{FOR}. Arguments: @* by - the iteration increment for the AutoGen FOR macro @node SCM for-from @subsection @file{for-from} - set initial index @findex for-from @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 147. @end ignore Usage: (for-from from) @* This function records the initial index information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. @xref{FOR}. Arguments: @* from - the initial index for the AutoGen FOR macro @node SCM for-index @subsection @file{for-index} - get current loop index @findex for-index @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 125. @end ignore Usage: (for-index [ for_var ]) @* Returns the current index for the named @code{FOR} loop. If not named, then the index for the innermost loop. Outside of any FOR loop, it returns @code{SCM_UNDEFINED}, @xref{FOR}. Arguments: @* for_var - Optional - which for loop @node SCM for-sep @subsection @file{for-sep} - set loop separation string @findex for-sep @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 209. @end ignore Usage: (for-sep separator) @* This function records the separation string that is to be inserted between each iteration of an AutoGen FOR function. This is often nothing more than a comma. Outside of the FOR macro itself, this function will emit an error. Arguments: @* separator - the text to insert between the output of each FOR iteration @node SCM for-to @subsection @file{for-to} - set ending index @findex for-to @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 168. @end ignore Usage: (for-to to) @* This function records the terminating value information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. @xref{FOR}. Arguments: @* to - the final index for the AutoGen FOR macro @node SCM get @subsection @file{get} - get named value @findex get @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 434. @end ignore Usage: (get ag-name [ alt-val ]) @* Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string. Arguments: @* ag-name - name of AutoGen value @* alt-val - Optional - value if not present @node SCM get-c-name @subsection @file{get-c-name} - get named value, mapped to C name syntax @findex get-c-name @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 466. @end ignore Usage: (get-c-name ag-name) @* Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string. The result is passed through "string->c-name!". Arguments: @* ag-name - name of AutoGen value @node SCM get-down-name @subsection @file{get-down-name} - get lower cased named value, mapped to C name syntax @findex get-down-name @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 507. @end ignore Usage: (get-down-name ag-name) @* Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string. The result is passed through "string->c-name!" and "string->down-case!". Arguments: @* ag-name - name of AutoGen value @node SCM get-up-name @subsection @file{get-up-name} - get upper cased named value, mapped to C name syntax @findex get-up-name @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 487. @end ignore Usage: (get-up-name ag-name) @* Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string. The result is passed through "string->c-name!" and "string->up-case!". Arguments: @* ag-name - name of AutoGen value @node SCM high-lim @subsection @file{high-lim} - get highest value index @findex high-lim @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 527. @end ignore Usage: (high-lim ag-name) @* Returns the highest index associated with an array of definitions. This is generally, but not necessarily, one less than the @code{count} value. (The indexes may be specified, rendering a non-zero based or sparse array of values.) This is very useful for specifying the size of a zero-based array of values where not all values are present. For example: @example tMyStruct myVals[ [+ (+ 1 (high-lim "my-val-list")) +] ]; @end example Arguments: @* ag-name - name of AutoGen value @node SCM last-for? @subsection @file{last-for?} - detect last iteration @findex last-for? @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 104. @end ignore Usage: (last-for? [ for_var ]) @* Returns SCM_BOOL_T if the named FOR loop (or, if not named, the current innermost loop) is on the last pass through the data. Outside of any FOR loop, it returns SCM_UNDEFINED. @xref{FOR}. Arguments: @* for_var - Optional - which for loop @node SCM len @subsection @file{len} - get count of values @findex len @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 573. @end ignore Usage: (len ag-name) @* If the named object is a group definition, then "len" is the same as "count". Otherwise, if it is one or more text definitions, then it is the sum of their string lengths. If it is a single text definition, then it is equivalent to @code{(string-length (get "ag-name"))}. Arguments: @* ag-name - name of AutoGen value @node SCM low-lim @subsection @file{low-lim} - get lowest value index @findex low-lim @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 594. @end ignore Usage: (low-lim ag-name) @* Returns the lowest index associated with an array of definitions. Arguments: @* ag-name - name of AutoGen value @node SCM make-header-guard @subsection @file{make-header-guard} - make self-inclusion guard @findex make-header-guard @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 785. @end ignore Usage: (make-header-guard name) @* This function will create a @code{#ifndef}/@code{#define} sequence for protecting a header from multiple evaluation. It will also set the Scheme variable @code{header-file} to the name of the file being protected and it will set @code{header-guard} to the name of the @code{#define} being used to protect it. It is expected that this will be used as follows: @example [+ (make-header-guard "group_name") +] ... #endif /* [+ (. header-guard) +] */ #include "[+ (. header-file) +]" @end example @noindent The @code{#define} name is composed as follows: @enumerate @item The first element is the string argument and a separating underscore. @item That is followed by the name of the header file with illegal characters mapped to underscores. @item The end of the name is always, "@code{_GUARD}". @item Finally, the entire string is mapped to upper case. @end enumerate The final @code{#define} name is stored in an SCM symbol named @code{header-guard}. Consequently, the concluding @code{#endif} for the file should read something like: @example #endif /* [+ (. header-guard) +] */ @end example The name of the header file (the current output file) is also stored in an SCM symbol, @code{header-file}. Therefore, if you are also generating a C file that uses the previously generated header file, you can put this into that generated file: @example #include "[+ (. header-file) +]" @end example Obviously, if you are going to produce more than one header file from a particular template, you will need to be careful how these SCM symbols get handled. Arguments: @* name - header group name @node SCM make-tmp-dir @subsection @file{make-tmp-dir} - create a temporary directory @findex make-tmp-dir @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 544. @end ignore Usage: (make-tmp-dir) @* Create a directory that will be cleaned up upon exit. This Scheme function takes no arguments. @node SCM match-value? @subsection @file{match-value?} - test for matching value @findex match-value? @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 401. @end ignore Usage: (match-value? op ag-name test-str) @* This function answers the question, "Is there an AutoGen value named @code{ag-name} with a value that matches the pattern @code{test-str} using the match function @code{op}?" Return SCM_BOOL_T iff at least one occurrence of the specified name has such a value. The operator can be any function that takes two string arguments and yields a boolean. It is expected that you will use one of the string matching functions provided by AutoGen. @* The value name must follow the same rules as the @code{ag-name} argument for @code{exist?} (@pxref{SCM exist?}). Arguments: @* op - boolean result operator @* ag-name - name of AutoGen value @* test-str - string to test against @node SCM out-delete @subsection @file{out-delete} - delete current output file @findex out-delete @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 199. @end ignore Usage: (out-delete) @* Remove the current output file. Cease processing the template for the current suffix. It is an error if there are @code{push}-ed output files. Use the @code{(error "0")} scheme function instead. @xref{output controls}. This Scheme function takes no arguments. @node SCM out-depth @subsection @file{out-depth} - output file stack depth @findex out-depth @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 719. @end ignore Usage: (out-depth) @* Returns the depth of the output file stack. @xref{output controls}. This Scheme function takes no arguments. @node SCM out-emit-suspended @subsection @file{out-emit-suspended} - emit the text of suspended output @findex out-emit-suspended @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 428. @end ignore Usage: (out-emit-suspended susp_nm) @* This function is equivalent to @code{(begin (out-resume ) (out-pop #t))} Arguments: @* susp_nm - A name tag of suspended output @node SCM out-line @subsection @file{out-line} - output file line number @findex out-line @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 749. @end ignore Usage: (out-line) @* Returns the current line number of the output file. It rewinds and reads the file to count newlines. This Scheme function takes no arguments. @node SCM out-move @subsection @file{out-move} - change name of output file @findex out-move @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 224. @end ignore Usage: (out-move new-name) @* Rename current output file. @xref{output controls}. Please note: changing the name will not save a temporary file from being deleted. It @i{may}, however, be used on the root output file. Arguments: @* new-name - new name for the current output file @node SCM out-name @subsection @file{out-name} - current output file name @findex out-name @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 732. @end ignore Usage: (out-name) @* Returns the name of the current output file. If the current file is a temporary, unnamed file, then it will scan up the chain until a real output file name is found. @xref{output controls}. This Scheme function takes no arguments. @node SCM out-pop @subsection @file{out-pop} - close current output file @findex out-pop @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 265. @end ignore Usage: (out-pop [ disp ]) @* If there has been a @code{push} on the output, then close that file and go back to the previously open file. It is an error if there has not been a @code{push}. @xref{output controls}. If there is no argument, no further action is taken. Otherwise, the argument should be @code{#t} and the contents of the file are returned by the function. Arguments: @* disp - Optional - return contents of the file @node SCM out-push-add @subsection @file{out-push-add} - append output to file @findex out-push-add @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 520. @end ignore Usage: (out-push-add file-name) @* Identical to @code{push-new}, except the contents are @strong{not} purged, but appended to. @xref{output controls}. Arguments: @* file-name - name of the file to append text to @node SCM out-push-new @subsection @file{out-push-new} - purge and create output file @findex out-push-new @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 573. @end ignore Usage: (out-push-new [ file-name ]) @* Leave the current output file open, but purge and create a new file that will remain open until a @code{pop} @code{delete} or @code{switch} closes it. The file name is optional and, if omitted, the output will be sent to a temporary file that will be deleted when it is closed. @xref{output controls}. Arguments: @* file-name - Optional - name of the file to create @node SCM out-resume @subsection @file{out-resume} - resume suspended output file @findex out-resume @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 392. @end ignore Usage: (out-resume susp_nm) @* If there has been a suspended output, then make that output descriptor current again. That output must have been suspended with the same tag name given to this routine as its argument. Arguments: @* susp_nm - A name tag for reactivating @node SCM out-suspend @subsection @file{out-suspend} - suspend current output file @findex out-suspend @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 349. @end ignore Usage: (out-suspend suspName) @* If there has been a @code{push} on the output, then set aside the output descriptor for later reactiviation with @code{(out-resume "xxx")}. The tag name need not reflect the name of the output file. In fact, the output file may be an anonymous temporary file. You may also change the tag every time you suspend output to a file, because the tag names are forgotten as soon as the file has been "resumed". Arguments: @* suspName - A name tag for reactivating @node SCM out-switch @subsection @file{out-switch} - close and create new output @findex out-switch @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 657. @end ignore Usage: (out-switch file-name) @* Switch output files - close current file and make the current file pointer refer to the new file. This is equivalent to @code{out-pop} followed by @code{out-push-new}, except that you may not pop the base level output file, but you may @code{switch} it. @xref{output controls}. Arguments: @* file-name - name of the file to create @node SCM output-file-next-line @subsection @file{output-file-next-line} - print the file name and next line number @findex output-file-next-line @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expOutput.c line 313. @end ignore Usage: (output-file-next-line [ line_off ] [ alt_fmt ]) @* Returns a string with the current output file name and line number. The default format is: # "" The argument may be either a number indicating an offset from the current output line number or an alternate formatting string. If both are provided, then the first must be a numeric offset. Be careful that you are directing output to the final output file. Otherwise, you will get the file name and line number of the temporary file. That won't be what you want. Arguments: @* line_off - Optional - offset to line number @* alt_fmt - Optional - alternate format string @node SCM set-option @subsection @file{set-option} - Set a command line option @findex set-option @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 622. @end ignore Usage: (set-option opt) @* The text argument must be an option name followed by any needed option argument. Returns SCM_UNDEFINED. Arguments: @* opt - AutoGen option name + its argument @node SCM set-writable @subsection @file{set-writable} - Make the output file be writable @findex set-writable @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcIf.c line 478. @end ignore Usage: (set-writable [ set? ]) @* This function will set the current output file to be writable (or not). This is only effective if neither the @code{--writable} nor @code{--not-writable} have been specified. This state is reset when the current suffix's output is complete. Arguments: @* set? - Optional - boolean arg, false to make output non-writable @node SCM stack @subsection @file{stack} - make list of AutoGen values @findex stack @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 872. @end ignore Usage: (stack ag-name) @* Create a scheme list of all the strings that are associated with a name. They must all be text values or we choke. Arguments: @* ag-name - AutoGen value name @node SCM stack-join @subsection @file{stack-join} - stack values then join them @findex stack-join @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/schemedef.scm line 372. @end ignore Usage: (stack-join join ag-name) @* This function will collect all the values named @code{ag-name} (see the @pxref{SCM stack, stack function}) and join them separated by the @code{join} string (see the @pxref{SCM join, join function}). Arguments: @* join - string between each element @* ag-name - name of autogen values to stack @node SCM suffix @subsection @file{suffix} - get the current suffix @findex suffix @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 639. @end ignore Usage: (suffix) @* Returns the current active suffix (@pxref{pseudo macro}). This Scheme function takes no arguments. @node SCM tpl-file @subsection @file{tpl-file} - get the template file name @findex tpl-file @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 653. @end ignore Usage: (tpl-file [ full_path ]) @* Returns the name of the current template file. If @code{#t} is passed in as an argument, then the template file is hunted for in the template search path. Otherwise, just the unadorned name. Arguments: @* full_path - Optional - include full path to file @node SCM tpl-file-line @subsection @file{tpl-file-line} - get the template file+line number @findex tpl-file-line @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 701. @end ignore Usage: (tpl-file-line [ msg-fmt ]) @* Returns the file and line number of the current template macro using either the default format, "from %s line %d", or else the format you supply. For example, if you want to insert a "C" language file-line directive, you would supply the format "# %2$d \"%1$s\"", but that is also already supplied with the scheme variable @xref{SCM c-file-line-fmt}. You may use it thus: @example (tpl-file-line c-file-line-fmt) @end example It is also safe to use the formatting string, "%2$d". AutoGen uses an argument vector version of printf: @xref{snprintfv}, and it does not need to know the types of each argument in order to skip forward to the second argument. Arguments: @* msg-fmt - Optional - formatting for line message @node SCM tpl-file-next-line @subsection @file{tpl-file-next-line} - get the template file plus next line number @findex tpl-file-next-line @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 733. @end ignore Usage: (tpl-file-next-line [ msg-fmt ]) @* This is almost the same as @xref{SCM tpl-file-line}, except that the line referenced is the next line, per C compiler conventions, and consequently defaults to the format: # "" Arguments: @* msg-fmt - Optional - formatting for line message @ignore Generated from auto_gen.tpl line 271. @end ignore @node SCM autogen-version @subsection @file{autogen-version} - autogen version number @findex autogen-version This is a symbol defining the current AutoGen version number string. It was first defined in AutoGen-5.2.14. It is currently ``5.16.2''. @node SCM c-file-line-fmt @subsection format file info as, ``@code{#line nn "file"}'' @findex c-file-line-fmt This is a symbol that can easily be used with the functions @xref{SCM tpl-file-line}, and @xref{SCM def-file-line}. These will emit C program @code{#line} directives pointing to template and definitions text, respectively. @ignore * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @end ignore @page @node Common Functions @section Common Scheme Functions This section describes a number of general purpose functions that make the kind of string processing that AutoGen does a little easier. Unlike the AutoGen specific functions (@pxref{AutoGen Functions}), these functions are available for direct use during definition load time. The equality test (@pxref{SCM =}) is ``overloaded'' to do string equivalence comparisons. If you are looking for inequality, the Scheme/Lisp way of spelling that is, ``(not (= ...))''. @menu * SCM agpl:: @file{agpl} - GNU Affero General Public License * SCM bsd:: @file{bsd} - BSD Public License * SCM c-string:: @file{c-string} - emit string for ANSI C * SCM error-source-line:: @file{error-source-line} - display of file & line * SCM extract:: @file{extract} - extract text from another file * SCM format-arg-count:: @file{format-arg-count} - count the args to a format * SCM fprintf:: @file{fprintf} - format to a file * SCM gperf:: @file{gperf} - perform a perfect hash function * SCM gperf-code:: @file{gperf-code} - emit the source of the generated gperf program * SCM gpl:: @file{gpl} - GNU General Public License * SCM hide-email:: @file{hide-email} - convert eaddr to javascript * SCM html-escape-encode:: @file{html-escape-encode} - encode html special characters * SCM in?:: @file{in?} - test for string in list * SCM join:: @file{join} - join string list with separator * SCM kr-string:: @file{kr-string} - emit string for K&R C * SCM lgpl:: @file{lgpl} - GNU Library General Public License * SCM license:: @file{license} - an arbitrary license * SCM license-description:: @file{license-description} - Emit a license description * SCM license-full:: @file{license-full} - Emit the licensing information and description * SCM license-info:: @file{license-info} - Emit the licensing information and copyright years * SCM license-name:: @file{license-name} - Emit the name of the license * SCM make-gperf:: @file{make-gperf} - build a perfect hash function program * SCM makefile-script:: @file{makefile-script} - create makefile script * SCM max:: @file{max} - maximum value in list * SCM min:: @file{min} - minimum value in list * SCM prefix:: @file{prefix} - prefix lines with a string * SCM printf:: @file{printf} - format to stdout * SCM raw-shell-str:: @file{raw-shell-str} - single quote shell string * SCM shell:: @file{shell} - invoke a shell script * SCM shell-str:: @file{shell-str} - double quote shell string * SCM shellf:: @file{shellf} - format a string, run shell * SCM sprintf:: @file{sprintf} - format a string * SCM string-capitalize:: @file{string-capitalize} - capitalize a new string * SCM string-capitalize!:: @file{string-capitalize!} - capitalize a string * SCM *=*:: @file{string-contains-eqv?} - caseless substring * SCM *==*:: @file{string-contains?} - substring match * SCM string-downcase:: @file{string-downcase} - lower case a new string * SCM string-downcase!:: @file{string-downcase!} - make a string be lower case * SCM *~:: @file{string-end-eqv-match?} - caseless regex ending * SCM *~~:: @file{string-end-match?} - regex match end * SCM *=:: @file{string-ends-eqv?} - caseless string ending * SCM *==:: @file{string-ends-with?} - string ending * SCM ==:: @file{string-equals?} - string matching * SCM ~:: @file{string-eqv-match?} - caseless regex match * SCM =:: @file{string-eqv?} - caseless match * SCM *~*:: @file{string-has-eqv-match?} - caseless regex contains * SCM *~~*:: @file{string-has-match?} - contained regex match * SCM ~~:: @file{string-match?} - regex match * SCM ~*:: @file{string-start-eqv-match?} - caseless regex start * SCM ~~*:: @file{string-start-match?} - regex match start * SCM =*:: @file{string-starts-eqv?} - caseless string start * SCM ==*:: @file{string-starts-with?} - string starting * SCM string-substitute:: @file{string-substitute} - multiple global replacements * SCM string-table-add:: @file{string-table-add} - Add an entry to a string table * SCM string-table-add-ref:: @file{string-table-add-ref} - Add an entry to a string table, get reference * SCM string-table-new:: @file{string-table-new} - create a string table * SCM string-table-size:: @file{string-table-size} - print the current size of a string table * SCM string->c-name!:: @file{string->c-name!} - map non-name chars to underscore * SCM string->camelcase:: @file{string->camelcase} - make a string be CamelCase * SCM string-tr:: @file{string-tr} - convert characters with new result * SCM string-tr!:: @file{string-tr!} - convert characters * SCM string-upcase:: @file{string-upcase} - upper case a new string * SCM string-upcase!:: @file{string-upcase!} - make a string be upper case * SCM sub-shell-str:: @file{sub-shell-str} - back quoted (sub-)shell string * SCM sum:: @file{sum} - sum of values in list * SCM time-string->number:: @file{time-string->number} - duration string to seconds * SCM version-compare:: @file{version-compare} - compare two version numbers @end menu @node SCM agpl @subsection @file{agpl} - GNU Affero General Public License @findex agpl @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 649. @end ignore Usage: (agpl prog-name prefix) @* Emit a string that contains the GNU Affero General Public License. This function is now deprecated. Please @xref{SCM license-description}. Arguments: @* prog-name - name of the program under the GPL @* prefix - String for starting each output line @node SCM bsd @subsection @file{bsd} - BSD Public License @findex bsd @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 696. @end ignore Usage: (bsd prog_name owner prefix) @* Emit a string that contains the Free BSD Public License. This function is now deprecated. Please @xref{SCM license-description}. Arguments: @* prog_name - name of the program under the BSD @* owner - Grantor of the BSD License @* prefix - String for starting each output line @node SCM c-string @subsection @file{c-string} - emit string for ANSI C @findex c-string @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 936. @end ignore Usage: (c-string string) @* Reform a string so that, when printed, the C compiler will be able to compile the data and construct a string that contains exactly what the current string contains. Many non-printing characters are replaced with escape sequences. Newlines are replaced with a backslash, an @code{n}, a closing quote, a newline, seven spaces and another re-opening quote. The compiler will implicitly concatenate them. The reader will see line breaks. A K&R compiler will choke. Use @code{kr-string} for that compiler. Arguments: @* string - string to reformat @node SCM error-source-line @subsection @file{error-source-line} - display of file & line @findex error-source-line @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcEval.c line 303. @end ignore Usage: (error-source-line) @* This function is only invoked just before Guile displays an error message. It displays the file name and line number that triggered the evaluation error. You should not need to invoke this routine directly. Guile will do it automatically. This Scheme function takes no arguments. @node SCM extract @subsection @file{extract} - extract text from another file @findex extract @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expExtract.c line 186. @end ignore Usage: (extract file-name marker-fmt [ caveat ] [ default ]) @* This function is used to help construct output files that may contain text that is carried from one version of the output to the next. The first two arguments are required, the second are optional: @itemize @bullet @item The @code{file-name} argument is used to name the file that contains the demarcated text. @item The @code{marker-fmt} is a formatting string that is used to construct the starting and ending demarcation strings. The sprintf function is given the @code{marker-fmt} with two arguments. The first is either "START" or "END". The second is either "DO NOT CHANGE THIS COMMENT" or the optional @code{caveat} argument. @item @code{caveat} is presumed to be absent if it is the empty string (@code{""}). If absent, ``DO NOT CHANGE THIS COMMENT'' is used as the second string argument to the @code{marker-fmt}. @item When a @code{default} argument is supplied and no pre-existing text is found, then this text will be inserted between the START and END markers. @end itemize @noindent The resulting strings are presumed to be unique within the subject file. As a simplified example: @example [+ (extract "fname" "// %s - SOMETHING - %s" "" "example default") +] @end example @noindent will result in the following text being inserted into the output: @example // START - SOMETHING - DO NOT CHANGE THIS COMMENT example default // END - SOMETHING - DO NOT CHANGE THIS COMMENT @end example @noindent The ``@code{example default}'' string can then be carried forward to the next generation of the output, @strong{@i{provided}} the output is not named "@code{fname}" @i{and} the old output is renamed to "@code{fname}" before AutoGen-eration begins. @table @strong @item NB: You can set aside previously generated source files inside the pseudo macro with a Guile/scheme function, extract the text you want to keep with this extract function. Just remember you should delete it at the end, too. Here is an example from my Finite State Machine generator: @example [+ AutoGen5 Template -*- Mode: text -*- h=%s-fsm.h c=%s-fsm.c (shellf "test -f %1$s-fsm.h && mv -f %1$s-fsm.h .fsm.head test -f %1$s-fsm.c && mv -f %1$s-fsm.c .fsm.code" (base-name)) +] @end example This code will move the two previously produced output files to files named ".fsm.head" and ".fsm.code". At the end of the 'c' output processing, I delete them. @item also NB: This function presumes that the output file ought to be editable so that the code between the @code{START} and @code{END} marks can be edited by the template user. Consequently, when the @code{(extract ...)} function is invoked, if the @code{writable} option has not been specified, then it will be set at that point. If this is not the desired behavior, the @code{--not-writable} command line option will override this. Also, you may use the guile function @code{(chmod "file" mode-value)} to override whatever AutoGen is using for the result mode. @end table Arguments: @* file-name - name of file with text @* marker-fmt - format for marker text @* caveat - Optional - warn about changing marker @* default - Optional - default initial text @node SCM format-arg-count @subsection @file{format-arg-count} - count the args to a format @findex format-arg-count @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expPrint.c line 294. @end ignore Usage: (format-arg-count format) @* Sometimes, it is useful to simply be able to figure out how many arguments are required by a format string. For example, if you are extracting a format string for the purpose of generating a macro to invoke a printf-like function, you can run the formatting string through this function to determine how many arguments to provide for in the macro. e.g. for this extraction text: @example /*=fumble bumble * fmt: 'stumble %s: %d\n' =*/ @end example @noindent You may wish to generate a macro: @example #define BUMBLE(a1,a2) printf_like(something,(a1),(a2)) @end example @noindent You can do this by knowing that the format needs two arguments. Arguments: @* format - formatting string @node SCM fprintf @subsection @file{fprintf} - format to a file @findex fprintf @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expPrint.c line 230. @end ignore Usage: (fprintf port format [ format-arg ... ]) @* Format a string using arguments from the alist. Write to a specified port. The result will NOT appear in your output. Use this to print information messages to a template user. Arguments: @* port - Guile-scheme output port @* format - formatting string @* format-arg - Optional - list of arguments to formatting string @node SCM gperf @subsection @file{gperf} - perform a perfect hash function @findex gperf @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGperf.c line 109. @end ignore Usage: (gperf name str) @* Perform the perfect hash on the input string. This is only useful if you have previously created a gperf program with the @code{make-gperf} function @xref{SCM make-gperf}. The @code{name} you supply here must match the name used to create the program and the string to hash must be one of the strings supplied in the @code{make-gperf} string list. The result will be a perfect hash index. See the documentation for @command{gperf(1GNU)} for more details. Arguments: @* name - name of hash list @* str - string to hash @node SCM gperf-code @subsection @file{gperf-code} - emit the source of the generated gperf program @findex gperf-code @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/schemedef.scm line 324. @end ignore Usage: (gperf-code st-name) @* Returns the contents of the emitted code, suitable for inclusion in another program. The interface contains the following elements: @table @samp @item struct @i{}_index containg the fields: @code{@{char const * name, int const id; @};} @item @i{}_hash() This is the hashing function with local only scope (static). @item @i{}_find() This is the searching and validation function. The first argument is the string to look up, the second is its length. It returns a pointer to the corresponding @code{@i{}_index} entry. @end table Use this in your template as follows where "@i{}" was set to be "@code{lookup}": @example [+ (make-gperf "lookup" (join "\n" (stack "name_list"))) (gperf-code "lookup") +] void my_fun(char * str) @{ struct lookup_index * li = lookup_find(str, strlen(str)); if (li != NULL) printf("%s yields %d\n", str, li->idx); @end example Arguments: @* st-name - the name of the gperf hash list @node SCM gpl @subsection @file{gpl} - GNU General Public License @findex gpl @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 626. @end ignore Usage: (gpl prog-name prefix) @* Emit a string that contains the GNU General Public License. This function is now deprecated. Please @xref{SCM license-description}. Arguments: @* prog-name - name of the program under the GPL @* prefix - String for starting each output line @node SCM hide-email @subsection @file{hide-email} - convert eaddr to javascript @findex hide-email @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expPrint.c line 254. @end ignore Usage: (hide-email display eaddr) @* Hides an email address as a java scriptlett. The 'mailto:' tag and the email address are coded bytes rather than plain text. They are also broken up. Arguments: @* display - display text @* eaddr - email address @node SCM html-escape-encode @subsection @file{html-escape-encode} - encode html special characters @findex html-escape-encode @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/schemedef.scm line 108. @end ignore Usage: (html-escape-encode str) @* This function will replace replace the characters @code{'&'}, @code{'<'} and @code{'>'} characters with the HTML/XML escape-encoded strings (@code{"&"}, @code{"<"}, and @code{">"}, respectively). Arguments: @* str - string to make substitutions in @node SCM in? @subsection @file{in?} - test for string in list @findex in? @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 439. @end ignore Usage: (in? test-string string-list ...) @* Return SCM_BOOL_T if the first argument string is found in one of the entries in the second (list-of-strings) argument. Arguments: @* test-string - string to look for @* string-list - list of strings to check @node SCM join @subsection @file{join} - join string list with separator @findex join @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 506. @end ignore Usage: (join separator list ...) @* With the first argument as the separator string, joins together an a-list of strings into one long string. The list may contain nested lists, partly because you cannot always control that. Arguments: @* separator - string to insert between entries @* list - list of strings to join @node SCM kr-string @subsection @file{kr-string} - emit string for K&R C @findex kr-string @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 914. @end ignore Usage: (kr-string string) @* Reform a string so that, when printed, a K&R C compiler will be able to compile the data and construct a string that contains exactly what the current string contains. Many non-printing characters are replaced with escape sequences. New-lines are replaced with a backslash-n-backslash and newline sequence, Arguments: @* string - string to reformat @node SCM lgpl @subsection @file{lgpl} - GNU Library General Public License @findex lgpl @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 672. @end ignore Usage: (lgpl prog_name owner prefix) @* Emit a string that contains the GNU Library General Public License. This function is now deprecated. Please @xref{SCM license-description}. Arguments: @* prog_name - name of the program under the LGPL @* owner - Grantor of the LGPL @* prefix - String for starting each output line @node SCM license @subsection @file{license} - an arbitrary license @findex license @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 721. @end ignore Usage: (license lic_name prog_name owner prefix) @* Emit a string that contains the named license. This function is now deprecated. Please @xref{SCM license-description}. Arguments: @* lic_name - file name of the license @* prog_name - name of the licensed program or library @* owner - Grantor of the License @* prefix - String for starting each output line @node SCM license-description @subsection @file{license-description} - Emit a license description @findex license-description @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 550. @end ignore Usage: (license-description license prog-name prefix [ owner ]) @* Emit a string that contains a detailed license description, with substitutions for program name, copyright holder and a per-line prefix. This is the text typically used as part of a source file header. For more details, @xref{SCM license-full, the license-full command}. Arguments: @* license - name of license type @* prog-name - name of the program under the GPL @* prefix - String for starting each output line @* owner - Optional - owner of the program @node SCM license-full @subsection @file{license-full} - Emit the licensing information and description @findex license-full @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 493. @end ignore Usage: (license-full license prog-name prefix [ owner ] [ years ]) @* Emit all the text that @code{license-info} and @code{license-description} would emit (@pxref{SCM license-info, @code{license-info}}, and @pxref{SCM license-description, @code{license-description}}), with all the same substitutions. All of these depend upon the existence of a license file named after the @code{license} argument with a @code{.lic} suffix. That file should contain three blocks of text, each separated by two or more newline characters. The first section describes copyright attribution and the name of the usage licence. For GNU software, this should be the text that is to be displayed with the program version. Four text markers can be replaced: , , and . The second section is a short description of the terms of the license. This is typically the kind of text that gets displayed in the header of source files. The third section is strictly the name of the license without any substitution markers. Only the , and markers are substituted. The third section is strictly the name of the license. No marker substitutions are performed. @example Copyright (C) , all rights reserved. This is free software. It is licensed for use, modification and redistribution under the terms of the GNU General Public License, version 3 or later is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software ... the GNU General Public License, version 3 or later @end example Arguments: @* license - name of license type @* prog-name - name of the program under the GPL @* prefix - String for starting each output line @* owner - Optional - owner of the program @* years - Optional - copyright years @node SCM license-info @subsection @file{license-info} - Emit the licensing information and copyright years @findex license-info @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 574. @end ignore Usage: (license-info license prog-name prefix [ owner ] [ years ]) @* Emit a string that contains the licensing description, with some substitutions for program name, copyright holder, a list of years when the source was modified, and a per-line prefix. This text typically includes a brief license description and is often printed out when a program starts running or as part of the @code{--version} output. For more details, @xref{SCM license-full, the license-full command}. Arguments: @* license - name of license type @* prog-name - name of the program under the GPL @* prefix - String for starting each output line @* owner - Optional - owner of the program @* years - Optional - copyright years @node SCM license-name @subsection @file{license-name} - Emit the name of the license @findex license-name @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expFormat.c line 601. @end ignore Usage: (license-name license) @* Emit a string that contains the full name of the license. Arguments: @* license - name of license type @node SCM make-gperf @subsection @file{make-gperf} - build a perfect hash function program @findex make-gperf @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGperf.c line 39. @end ignore Usage: (make-gperf name strings ...) @* Build a program to perform perfect hashes of a known list of input strings. This function produces no output, but prepares a program named, @file{gperf_} for use by the gperf function @xref{SCM gperf}. This program will be obliterated as AutoGen exits. However, you may incorporate the generated hashing function into your C program with commands something like the following: @example [+ (shellf "sed '/^int main(/,$d;/^#line/d' $@{gpdir@}/%s.c" name ) +] @end example where @code{name} matches the name provided to this @code{make-perf} function. @code{gpdir} is the variable used to store the name of the temporary directory used to stash all the files. Arguments: @* name - name of hash list @* strings - list of strings to hash @node SCM makefile-script @subsection @file{makefile-script} - create makefile script @findex makefile-script @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expMake.c line 253. @end ignore Usage: (makefile-script text) @* This function will take ordinary shell script text and reformat it so that it will work properly inside of a makefile shell script. Not every shell construct can be supported; the intent is to have most ordinary scripts work without much, if any, alteration. The following transformations are performed on the source text: @enumerate @item Trailing whitespace on each line is stripped. @item Except for the last line, the string, " ; \\" is appended to the end of every line that does not end with certain special characters or keywords. Note that this will mutilate multi-line quoted strings, but @command{make} renders it impossible to use multi-line constructs anyway. @item If the line ends with a backslash, it is left alone. @item If the line ends with a semi-colon, conjunction operator, pipe (vertical bar) or one of the keywords "then", "else" or "in", then a space and a backslash is added, but no semi-colon. @item The dollar sign character is doubled, unless it immediately precedes an opening parenthesis or the single character make macros '*', '<', '@@', '?' or '%'. Other single character make macros that do not have enclosing parentheses will fail. For shell usage of the "$@@", "$?" and "$*" macros, you must enclose them with curly braces, e.g., "$@{?@}". The ksh construct @code{$()} will not work. Though some @command{make}s accept @code{$@{var@}} constructs, this function will assume it is for shell interpretation and double the dollar character. You must use @code{$(var)} for all @command{make} substitutions. @item Double dollar signs are replaced by four before the next character is examined. @item Every line is prefixed with a tab, unless the first line already starts with a tab. @item The newline character on the last line, if present, is suppressed. @item Blank lines are stripped. @item Lines starting with "@@ifdef", "@@ifndef", "@@else" and "@@endif" are presumed to be autoconf "sed" expression tags. These lines will be emitted as-is, with no tab prefix and no line splicing backslash. These lines can then be processed at configure time with @code{AC_CONFIG_FILES} sed expressions, similar to: @example sed "/^@@ifdef foo/d;/^@@endif foo/d;/^@@ifndef foo/,/^@@endif foo/d" @end example @end enumerate @noindent This function is intended to be used approximately as follows: @example $(TARGET) : $(DEPENDENCIES) <+ (out-push-new) +> ....mostly arbitrary shell script text.... <+ (makefile-script (out-pop #t)) +> @end example Arguments: @* text - the text of the script @node SCM max @subsection @file{max} - maximum value in list @findex max @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 88. @end ignore Usage: (max list ...) @* Return the maximum value in the list Arguments: @* list - list of values. Strings are converted to numbers @node SCM min @subsection @file{min} - minimum value in list @findex min @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 147. @end ignore Usage: (min list ...) @* Return the minimum value in the list Arguments: @* list - list of values. Strings are converted to numbers @node SCM prefix @subsection @file{prefix} - prefix lines with a string @findex prefix @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 604. @end ignore Usage: (prefix prefix text) @* Prefix every line in the second string with the first string. For example, if the first string is "# " and the second contains: @example two lines @end example @noindent The result string will contain: @example # two # lines @end example Arguments: @* prefix - string to insert at start of each line @* text - multi-line block of text @node SCM printf @subsection @file{printf} - format to stdout @findex printf @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expPrint.c line 206. @end ignore Usage: (printf format [ format-arg ... ]) @* Format a string using arguments from the alist. Write to the standard out port. The result will NOT appear in your output. Use this to print information messages to a template user. Use ``(sprintf ...)'' to add text to your document. Arguments: @* format - formatting string @* format-arg - Optional - list of arguments to formatting string @node SCM raw-shell-str @subsection @file{raw-shell-str} - single quote shell string @findex raw-shell-str @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 686. @end ignore Usage: (raw-shell-str string) @* Convert the text of the string into a singly quoted string that a normal shell will process into the original string. (It will not do macro expansion later, either.) Contained single quotes become tripled, with the middle quote escaped with a backslash. Normal shells will reconstitute the original string. @strong{Notice}: some shells will not correctly handle unusual non-printing characters. This routine works for most reasonably conventional ASCII strings. Arguments: @* string - string to transform @node SCM shell @subsection @file{shell} - invoke a shell script @findex shell @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/agShell.c line 57. @end ignore Usage: (shell command) @* Generate a string by writing the value to a server shell and reading the output back in. The template programmer is responsible for ensuring that it completes within 10 seconds. If it does not, the server will be killed, the output tossed and a new server started. Please note: This is the same server process used by the '#shell' definitions directive and backquoted @code{`} definitions. There may be left over state from previous shell expressions and the @code{`} processing in the declarations. However, a @code{cd} to the original directory is always issued before the new command is issued. Also note: When initializing, autogen will set the environment variable "AGexe" to the full path of the autogen executable. Arguments: @* command - shell command - the result value is the stdout output. @node SCM shell-str @subsection @file{shell-str} - double quote shell string @findex shell-str @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 783. @end ignore Usage: (shell-str string) @* Convert the text of the string into a double quoted string that a normal shell will process into the original string, almost. It will add the escape character @code{\\} before two special characters to accomplish this: the backslash @code{\\} and double quote @code{"}. @strong{Notice}: some shells will not correctly handle unusual non-printing characters. This routine works for most reasonably conventional ASCII strings. @strong{WARNING}: @* This function omits the extra backslash in front of a backslash, however, if it is followed by either a backquote or a dollar sign. It must do this because otherwise it would be impossible to protect the dollar sign or backquote from shell evaluation. Consequently, it is not possible to render the strings "\\$" or "\\`". The lesser of two evils. All others characters are copied directly into the output. The @code{sub-shell-str} variation of this routine behaves identically, except that the extra backslash is omitted in front of @code{"} instead of @code{`}. You have to think about it. I'm open to suggestions. Meanwhile, the best way to document is with a detailed output example. If the backslashes make it through the text processing correctly, below you will see what happens with three example strings. The first example string contains a list of quoted @code{foo}s, the second is the same with a single backslash before the quote characters and the last is with two backslash escapes. Below each is the result of the @code{raw-shell-str}, @code{shell-str} and @code{sub-shell-str} functions. @example foo[0] ''foo'' 'foo' "foo" `foo` $foo raw-shell-str -> \'\''foo'\'\'' '\''foo'\'' "foo" `foo` $foo' shell-str -> "''foo'' 'foo' \"foo\" `foo` $foo" sub-shell-str -> `''foo'' 'foo' "foo" \`foo\` $foo` foo[1] \'bar\' \"bar\" \`bar\` \$bar raw-shell-str -> '\'\''bar\'\'' \"bar\" \`bar\` \$bar' shell-str -> "\\'bar\\' \\\"bar\\\" \`bar\` \$bar" sub-shell-str -> `\\'bar\\' \"bar\" \\\`bar\\\` \$bar` foo[2] \\'BAZ\\' \\"BAZ\\" \\`BAZ\\` \\$BAZ raw-shell-str -> '\\'\''BAZ\\'\'' \\"BAZ\\" \\`BAZ\\` \\$BAZ' shell-str -> "\\\\'BAZ\\\\' \\\\\"BAZ\\\\\" \\\`BAZ\\\` \\\$BAZ" sub-shell-str -> `\\\\'BAZ\\\\' \\\"BAZ\\\" \\\\\`BAZ\\\\\` \\\$BAZ` @end example There should be four, three, five and three backslashes for the four examples on the last line, respectively. The next to last line should have four, five, three and three backslashes. If this was not accurately reproduced, take a look at the agen5/test/shell.test test. Notice the backslashes in front of the dollar signs. It goes from zero to one to three for the "cooked" string examples. Arguments: @* string - string to transform @node SCM shellf @subsection @file{shellf} - format a string, run shell @findex shellf @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/agShell.c line 96. @end ignore Usage: (shellf format [ format-arg ... ]) @* Format a string using arguments from the alist, then send the result to the shell for interpretation. Arguments: @* format - formatting string @* format-arg - Optional - list of arguments to formatting string @node SCM sprintf @subsection @file{sprintf} - format a string @findex sprintf @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expPrint.c line 183. @end ignore Usage: (sprintf format [ format-arg ... ]) @* Format a string using arguments from the alist. Arguments: @* format - formatting string @* format-arg - Optional - list of arguments to formatting string @node SCM string-capitalize @subsection @file{string-capitalize} - capitalize a new string @findex string-capitalize @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 385. @end ignore Usage: (string-capitalize str) @* Create a new SCM string containing the same text as the original, only all the first letter of each word is upper cased and all other letters are made lower case. Arguments: @* str - input string @node SCM string-capitalize! @subsection @file{string-capitalize!} - capitalize a string @findex string-capitalize! @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 342. @end ignore Usage: (string-capitalize! str) @* capitalize all the words in an SCM string. Arguments: @* str - input/output string @node SCM *=* @subsection @file{string-contains-eqv?} - caseless substring @findex string-contains-eqv? @findex *=* @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 291. @end ignore Usage: (*=* text match) @* string-contains-eqv?: Test to see if a string contains an equivalent string. `equivalent' means the strings match, but without regard to character case and certain characters are considered `equivalent'. Viz., '-', '_' and '^' are equivalent. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM *==* @subsection @file{string-contains?} - substring match @findex string-contains? @findex *==* @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 158. @end ignore Usage: (*==* text match) @* string-contains?: Test to see if a string contains a substring. "strstr(3)" will find an address. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM string-downcase @subsection @file{string-downcase} - lower case a new string @findex string-downcase @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 440. @end ignore Usage: (string-downcase str) @* Create a new SCM string containing the same text as the original, only all the upper case letters are changed to lower case. Arguments: @* str - input string @node SCM string-downcase! @subsection @file{string-downcase!} - make a string be lower case @findex string-downcase! @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 409. @end ignore Usage: (string-downcase! str) @* Change to lower case all the characters in an SCM string. Arguments: @* str - input/output string @node SCM *~ @subsection @file{string-end-eqv-match?} - caseless regex ending @findex string-end-eqv-match? @findex *~ @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 563. @end ignore Usage: (*~ text match) @* string-end-eqv-match?: Test to see if a string ends with a pattern. Case is not significant. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM *~~ @subsection @file{string-end-match?} - regex match end @findex string-end-match? @findex *~~ @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 550. @end ignore Usage: (*~~ text match) @* string-end-match?: Test to see if a string ends with a pattern. Case is significant. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM *= @subsection @file{string-ends-eqv?} - caseless string ending @findex string-ends-eqv? @findex *= @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 339. @end ignore Usage: (*= text match) @* string-ends-eqv?: Test to see if a string ends with an equivalent string. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM *== @subsection @file{string-ends-with?} - string ending @findex string-ends-with? @findex *== @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 187. @end ignore Usage: (*== text match) @* string-ends-with?: Test to see if a string ends with a substring. strcmp(3) returns zero for comparing the string ends. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM == @subsection @file{string-equals?} - string matching @findex string-equals? @findex == @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 262. @end ignore Usage: (== text match) @* string-equals?: Test to see if two strings exactly match. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM ~ @subsection @file{string-eqv-match?} - caseless regex match @findex string-eqv-match? @findex ~ @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 751. @end ignore Usage: (~ text match) @* string-eqv-match?: Test to see if a string fully matches a pattern. Case is not significant, but any character equivalences must be expressed in your regular expression. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM = @subsection @file{string-eqv?} - caseless match @findex string-eqv? @findex = @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 409. @end ignore Usage: (= text match) @* string-eqv?: Test to see if two strings are equivalent. `equivalent' means the strings match, but without regard to character case and certain characters are considered `equivalent'. Viz., '-', '_' and '^' are equivalent. If the arguments are not strings, then the result of the numeric comparison is returned. This is an overloaded operation. If the arguments are both numbers, then the query is passed through to @code{scm_num_eq_p()}, otherwise the result depends on the SCMs being strictly equal. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM *~* @subsection @file{string-has-eqv-match?} - caseless regex contains @findex string-has-eqv-match? @findex *~* @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 481. @end ignore Usage: (*~* text match) @* string-has-eqv-match?: Test to see if a string contains a pattern. Case is not significant. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM *~~* @subsection @file{string-has-match?} - contained regex match @findex string-has-match? @findex *~~* @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 468. @end ignore Usage: (*~~* text match) @* string-has-match?: Test to see if a string contains a pattern. Case is significant. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM ~~ @subsection @file{string-match?} - regex match @findex string-match? @findex ~~ @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 738. @end ignore Usage: (~~ text match) @* string-match?: Test to see if a string fully matches a pattern. Case is significant. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM ~* @subsection @file{string-start-eqv-match?} - caseless regex start @findex string-start-eqv-match? @findex ~* @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 657. @end ignore Usage: (~* text match) @* string-start-eqv-match?: Test to see if a string starts with a pattern. Case is not significant. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM ~~* @subsection @file{string-start-match?} - regex match start @findex string-start-match? @findex ~~* @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 644. @end ignore Usage: (~~* text match) @* string-start-match?: Test to see if a string starts with a pattern. Case is significant. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM =* @subsection @file{string-starts-eqv?} - caseless string start @findex string-starts-eqv? @findex =* @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 376. @end ignore Usage: (=* text match) @* string-starts-eqv?: Test to see if a string starts with an equivalent string. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM ==* @subsection @file{string-starts-with?} - string starting @findex string-starts-with? @findex ==* @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 226. @end ignore Usage: (==* text match) @* string-starts-with?: Test to see if a string starts with a substring. Arguments: @* text - text to test for pattern @* match - pattern/substring to search for @node SCM string-substitute @subsection @file{string-substitute} - multiple global replacements @findex string-substitute @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 1054. @end ignore Usage: (string-substitute source match repl) @* @code{match} and @code{repl} may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all amphersands, less than and greater than characters, do something like this: @example (string-substitute source (list "&" "<" ">") (list "&" "<" ">")) @end example Arguments: @* source - string to transform @* match - substring or substring list to be replaced @* repl - replacement strings or substrings @node SCM string-table-add @subsection @file{string-table-add} - Add an entry to a string table @findex string-table-add @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/schemedef.scm line 224. @end ignore Usage: (string-table-add st-name str-val) @* Check for a duplicate string and, if none, then insert a new string into the string table. In all cases, returns the character index of the beginning of the string in the table. The returned index can be used in expressions like: @example string_array + @end example @noindent that will yield the address of the first byte of the inserted string. See the @file{strtable.test} AutoGen test for a usage example. Arguments: @* st-name - the name of the array of characters @* str-val - the (possibly) new value to add @node SCM string-table-add-ref @subsection @file{string-table-add-ref} - Add an entry to a string table, get reference @findex string-table-add-ref @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/schemedef.scm line 262. @end ignore Usage: (string-table-add-ref st-name str-val) @* Identical to string-table-add, except the value returned is the string "st-name" '+' and the index returned by string-table-add. Arguments: @* st-name - the name of the array of characters @* str-val - the (possibly) new value to add @node SCM string-table-new @subsection @file{string-table-new} - create a string table @findex string-table-new @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/schemedef.scm line 131. @end ignore Usage: (string-table-new st-name) @* This function will create an array of characters. The companion functions, (@xref{SCM string-table-add}, @xref{SCM string-table-add-ref}, and @pxref{SCM emit-string-table}) will insert text and emit the populated table. With these functions, it should be much easier to construct structures containing string offsets instead of string pointers. That can be very useful when transmitting, storing or sharing data with different address spaces. @noindent Here is a brief example copied from the strtable.test test: @example [+ (string-table-new "scribble") (out-push-new) ;; redirect output to temporary (define ct 1) +][+ FOR str IN that was the week that was +][+ (set! ct (+ ct 1)) +] [+ (string-table-add-ref "scribble" (get "str")) +],[+ ENDFOR +] [+ (out-suspend "main") (emit-string-table "scribble") (ag-fprintf 0 "\nchar const *ap[%d] = @{" ct) (out-resume "main") (out-pop #t) ;; now dump out the redirected output +] NULL @}; @end example @noindent Some explanation: @noindent I added the @code{(out-push-new)} because the string table text is diverted into an output stream named, ``scribble'' and I want to have the string table emitted before the string table references. The string table references are also emitted inside the @code{FOR} loop. So, when the loop is done, the current output is suspended under the name, ``main'' and the ``scribble'' table is then emitted into the primary output. (@code{emit-string-table} inserts its output directly into the current output stream. It does not need to be the last function in an AutoGen macro block.) Next I @code{ag-fprintf} the array-of-pointer declaration directly into the current output. Finally I restore the ``main'' output stream and @code{(out-pop #t)}-it into the main output stream. Here is the result. Note that duplicate strings are not repeated in the string table: @example static char const scribble[18] = "that\0" "was\0" "the\0" "week\0"; char const *ap[7] = @{ scribble+0, scribble+5, scribble+9, scribble+13, scribble+0, scribble+5, NULL @}; @end example These functions use the global name space @code{stt-*} in addition to the function names. If you utilize this in your programming, it is recommended that you prevent printf format usage warnings with the GCC option @code{-Wno-format-contains-nul} Arguments: @* st-name - the name of the array of characters @node SCM string-table-size @subsection @file{string-table-size} - print the current size of a string table @findex string-table-size @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/schemedef.scm line 311. @end ignore Usage: (string-table-size st-name) @* Returns the current byte count of the string table. Arguments: @* st-name - the name of the array of characters @node SCM string->c-name! @subsection @file{string->c-name!} - map non-name chars to underscore @findex string->c-name! @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 248. @end ignore Usage: (string->c-name! str) @* Change all the graphic characters that are invalid in a C name token into underscores. Whitespace characters are ignored. Any other character type (i.e. non-graphic and non-white) will cause a failure. Arguments: @* str - input/output string @node SCM string->camelcase @subsection @file{string->camelcase} - make a string be CamelCase @findex string->camelcase @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 463. @end ignore Usage: (string->camelcase str) @* Capitalize the first letter of each block of letters and numbers, and stripping out characters that are not alphanumerics. For example, "alpha-beta0gamma" becomes "AlphaBeta0gamma". Arguments: @* str - input/output string @node SCM string-tr @subsection @file{string-tr} - convert characters with new result @findex string-tr @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 1034. @end ignore Usage: (string-tr source match translation) @* This is identical to @code{string-tr!}, except that it does not over-write the previous value. Arguments: @* source - string to transform @* match - characters to be converted @* translation - conversion list @node SCM string-tr! @subsection @file{string-tr!} - convert characters @findex string-tr! @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 963. @end ignore Usage: (string-tr! source match translation) @* This is the same as the @code{tr(1)} program, except the string to transform is the first argument. The second and third arguments are used to construct mapping arrays for the transformation of the first argument. It is too bad this little program has so many different and incompatible implementations! Arguments: @* source - string to transform @* match - characters to be converted @* translation - conversion list @node SCM string-upcase @subsection @file{string-upcase} - upper case a new string @findex string-upcase @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 319. @end ignore Usage: (string-upcase str) @* Create a new SCM string containing the same text as the original, only all the lower case letters are changed to upper case. Arguments: @* str - input string @node SCM string-upcase! @subsection @file{string-upcase!} - make a string be upper case @findex string-upcase! @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 288. @end ignore Usage: (string-upcase! str) @* Change to upper case all the characters in an SCM string. Arguments: @* str - input/output string @node SCM sub-shell-str @subsection @file{sub-shell-str} - back quoted (sub-)shell string @findex sub-shell-str @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 853. @end ignore Usage: (sub-shell-str string) @* This function is substantially identical to @code{shell-str}, except that the quoting character is @code{`} and the "leave the escape alone" character is @code{"}. Arguments: @* string - string to transform @node SCM sum @subsection @file{sum} - sum of values in list @findex sum @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expGuile.c line 206. @end ignore Usage: (sum list ...) @* Compute the sum of the list of expressions. Arguments: @* list - list of values. Strings are converted to numbers @node SCM time-string->number @subsection @file{time-string->number} - duration string to seconds @findex time-string->number @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expString.c line 1096. @end ignore Usage: (time-string->number time_spec) @* Convert the argument string to a time period in seconds. The string may use multiple parts consisting of days, hours minutes and seconds. These are indicated with a suffix of @code{d}, @code{h}, @code{m} and @code{s} respectively. Hours, minutes and seconds may also be represented with @code{HH:MM:SS} or, without hours, as @code{MM:SS}. Arguments: @* time_spec - string to parse @node SCM version-compare @subsection @file{version-compare} - compare two version numbers @findex version-compare @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/expState.c line 226. @end ignore Usage: (version-compare op v1 v2) @* Converts v1 and v2 strings into 64 bit values and returns the result of running 'op' on those values. It assumes that the version is a 1 to 4 part dot-separated series of numbers. Suffixes like, "5pre4" or "5-pre4" will be interpreted as two numbers. The first number ("5" in this case) will be decremented and the number after the "pre" will be added to 0xC000. (Unless your platform is unable to support 64 bit integer arithmetic. Then it will be added to 0xC0.) Consequently, these yield true: @example (version-compare > "5.8.5" "5.8.5-pre4") (version-compare > "5.8.5-pre10" "5.8.5-pre4") @end example Arguments: @* op - comparison operator @* v1 - first version @* v2 - compared-to version @ignore START == MACROS == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @c === SECTION MARKER @node native macros @section AutoGen Native Macros @cindex native macros This section describes the various AutoGen natively defined macros. Unlike the Scheme functions, some of these macros are "block macros" with a scope that extends through a terminating macro. Block macros must not overlap. That is to say, a block macro started within the scope of an encompassing block macro must have its matching end macro appear before the encompassing block macro is either ended or subdivided. The block macros are these: @table @code @item CASE This macro has scope through the @code{ESAC} macro. The scope is subdivided by @code{SELECT} macros. You must have at least one @code{SELECT} macro. @item DEFINE This macro has scope through the @code{ENDDEF} macro. The defined user macro can never be a block macro. This macro is extracted from the template @i{before} the template is processed. Consequently, you cannot select a definition based on context. You can, however, place them all at the end of the file. @item FOR This macro has scope through the @code{ENDFOR} macro. @item IF This macro has scope through the @code{ENDIF} macro. The scope may be subdivided by @code{ELIF} and @code{ELSE} macros. Obviously, there may be only one @code{ELSE} macro and it must be the last of these subdivisions. @item INCLUDE This macro has the scope of the included file. It is a block macro in the sense that the included file must not contain any incomplete block macros. @item WHILE This macro has scope through the @code{ENDWHILE} macro. @end table @ignore END == MACROS == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @menu * AGMacro syntax:: AutoGen Macro Syntax * BREAK:: BREAK - Leave a FOR or WHILE macro * CASE:: CASE - Select one of several template blocks * COMMENT:: COMMENT - A block of comment to be ignored * CONTINUE:: CONTINUE - Skip to end of a FOR or WHILE macro. * DEBUG:: DEBUG - Print debug message to trace output * DEFINE:: DEFINE - Define a user AutoGen macro * ELIF:: ELIF - Alternate Conditional Template Block * ELSE:: ELSE - Alternate Template Block * ENDDEF:: ENDDEF - Ends a macro definition. * ENDFOR:: ENDFOR - Terminates the @code{FOR} function template block * ENDIF:: ENDIF - Terminate the @code{IF} Template Block * ENDWHILE:: ENDWHILE - Terminate the @code{WHILE} Template Block * ESAC:: ESAC - Terminate the @code{CASE} Template Block * EXPR:: EXPR - Evaluate and emit an Expression * FOR:: FOR - Emit a template block multiple times * IF:: IF - Conditionally Emit a Template Block * INCLUDE:: INCLUDE - Read in and emit a template block * INVOKE:: INVOKE - Invoke a User Defined Macro * RETURN:: RETURN - Leave an INVOKE-d (DEFINE) macro * SELECT:: SELECT - Selection block for CASE function * UNKNOWN:: UNKNOWN - Either a user macro or a value name. * WHILE:: WHILE - Conditionally loop over a Template Block @end menu @node AGMacro syntax @subsection AutoGen Macro Syntax @cindex macro syntax The general syntax is: @example [ @{ | @} ] [ ... ] @end example @noindent The syntax for @code{} depends on the particular macro, but is generally a full expression (@pxref{expression syntax}). Here are the exceptions to that general rule: @enumerate @item @code{INVOKE} macros, implicit or explicit, must be followed by a list of name/string value pairs. The string values are @i{simple expressions}, as described above. That is, the @code{INVOKE} syntax is one of these two: @example [ [ = ] ... ] INVOKE [ [ = ] ... ] @end example @item AutoGen FOR macros must be in one of three forms: @example FOR [ ] FOR (...Scheme expression list) FOR IN [ ... ] @end example @noindent where: @table @samp @item must be a simple name. @item is inserted between copies of the enclosed block. Do not try to use ``IN'' as your separator string. It won't work. @item is an entry in a list of strings. ``@code{}'' is assigned each value from the ``@code{IN}'' list before expanding the @code{FOR} block. @item (...Scheme expression list) is expected to contain one or more of the @code{for-from}, @code{for-to}, @code{for-by}, and @code{for-sep} functions. (@xref{FOR}, and @ref{AutoGen Functions}) @end table The first two forms iterate over the @code{FOR} block if @code{} is found in the AutoGen values. The last form will create the AutoGen value named @code{}. @item AutoGen @code{DEFINE} macros must be followed by a simple name. Anything after that is ignored. Consequently, that ``comment space'' may be used to document any named values the macro expects to have set up as arguments. @xref{DEFINE}. @item The AutoGen @code{COMMENT}, @code{ELSE}, @code{ESAC} and the @code{END*} macros take no arguments and ignore everything after the macro name (e.g. see @ref{COMMENT}) @end enumerate @node BREAK @subsection BREAK - Leave a FOR or WHILE macro @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/functions.c line 36. @end ignore @findex BREAK This will unwind the loop context and resume after ENDFOR/ENDWHILE. Note that unless this happens to be the last iteration anyway, the (last-for?) function will never yield "#t". @node CASE @subsection CASE - Select one of several template blocks @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 880. @end ignore @findex CASE The arguments are evaluated and converted to a string, if necessary. A simple name will be interpreted as an AutoGen value name and its value will be used by the @code{SELECT} macros (see the example below and the expression evaluation function, @pxref{EXPR}). The scope of the macro is up to the matching @code{ESAC} macro. Within the scope of a @code{CASE}, this string is matched against case selection macros. There are sixteen match macros that are derived from four different ways matches may be performed, plus an "always true", "true if the AutoGen value was found", and "true if no AutoGen value was found" matches. The codes for the nineteen match macros are formed as follows: @enumerate @item Must the match start matching from the beginning of the string? If not, then the match macro code starts with an asterisk (@code{*}). @item Must the match finish matching at the end of the string? If not, then the match macro code ends with an asterisk (@code{*}). @item Is the match a pattern match or a string comparison? If a comparison, use an equal sign (@code{=}). If a pattern match, use a tilde (@code{~}). @item Is the match case sensitive? If alphabetic case is important, double the tilde or equal sign. @item Do you need a default match when none of the others match? Use a single asterisk (@code{*}). @item Do you need to distinguish between an empty string value and a value that was not found? Use the non-existence test (@code{!E}) before testing a full match against an empty string (@code{== ''}). There is also an existence test (@code{+E}), more for symmetry than for practical use. @end enumerate @noindent For example: @example [+ CASE +] [+ ~~* "[Tt]est" +]reg exp must match at start, not at end [+ == "TeSt" +]a full-string, case sensitive compare [+ = "TEST" +]a full-string, case insensitive compare [+ !E +]not exists - matches if no AutoGen value found [+ == "" +]expression yielded a zero-length string [+ +E +]exists - matches if there is any value result [+ * +]always match - no testing [+ ESAC +] @end example @code{} (@pxref{expression syntax}) may be any expression, including the use of apply-codes and value-names. If the expression yields a number, it is converted to a decimal string. These case selection codes have also been implemented as Scheme expression functions using the same codes. They are documented in this texi doc as ``string-*?'' predicates (@pxref{Common Functions}). @node COMMENT @subsection COMMENT - A block of comment to be ignored @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/functions.c line 348. @end ignore @findex COMMENT This function can be specified by the user, but there will never be a situation where it will be invoked at emit time. The macro is actually removed from the internal representation. If the native macro name code is @code{#}, then the entire macro function is treated as a comment and ignored. @example [+ # say what you want, but no '+' before any ']' chars +] @end example @node CONTINUE @subsection CONTINUE - Skip to end of a FOR or WHILE macro. @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/functions.c line 26. @end ignore @findex CONTINUE This will skip the remainder of the loop and start the next. @node DEBUG @subsection DEBUG - Print debug message to trace output @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcDef.c line 387. @end ignore @findex DEBUG If the tracing level is at "debug-message" or above (@pxref{autogen trace}), this macro prints a debug message to trace output. This message is not evaluated. This macro can also be used to set useful debugger breakpoints. By inserting [+DEBUG n+] into your template, you can set a debugger breakpoint on the #n case element below (in the AutoGen source) and step through the processing of interesting parts of your template. To be useful, you have to have access to the source tree where autogen was built and the template being processed. The definitions are also helpful, but not crucial. Please contact the author if you think you might actually want to use this. @node DEFINE @subsection DEFINE - Define a user AutoGen macro @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcDef.c line 531. @end ignore @findex DEFINE @cindex define macro This function will define a new macro. You must provide a name for the macro. You do not specify any arguments, though the invocation may specify a set of name/value pairs that are to be active during the processing of the macro. @example [+ define foo +] ... macro body with macro functions ... [+ enddef +] ... [+ foo bar='raw text' baz=<> +] @end example Once the macro has been defined, this new macro can be invoked by specifying the macro name as the first token after the start macro marker. Alternatively, you may make the invocation explicitly invoke a defined macro by specifying @code{INVOKE} (@pxref{INVOKE}) in the macro invocation. If you do that, the macro name can be computed with an expression that gets evaluated every time the INVOKE macro is encountered. Any remaining text in the macro invocation will be used to create new name/value pairs that only persist for the duration of the processing of the macro. The expressions are evaluated the same way basic expressions are evaluated. @xref{expression syntax}. The resulting definitions are handled much like regular definitions, except: @enumerate @item The values may not be compound. That is, they may not contain nested name/value pairs. @item The bindings go away when the macro is complete. @item The name/value pairs are separated by whitespace instead of semi-colons. @item Sequences of strings are not concatenated. @end enumerate @quotation @strong{NB:} The macro is extracted from the template as the template is scanned. You cannot conditionally define a macro by enclosing it in an @code{IF}/@code{ENDIF} (@pxref{IF}) macro pair. If you need to dynamically select the format of a @code{DEFINE}d macro, then put the flavors into separate template files that simply define macros. @code{INCLUDE} (@pxref{INCLUDE}) the appropriate template when you have computed which you need. @end quotation Due to this, it is acceptable and even a good idea to place all the @code{DEFINE} macros at the end of the template. That puts the main body of the template at the beginning of the file. @node ELIF @subsection ELIF - Alternate Conditional Template Block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcIf.c line 258. @end ignore @findex ELIF This macro must only appear after an @code{IF} function, and before any associated @code{ELSE} or @code{ENDIF} functions. It denotes the start of an alternate template block for the @code{IF} function. Its expression argument is evaluated as are the arguments to @code{IF}. For a complete description @xref{IF}. @node ELSE @subsection ELSE - Alternate Template Block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcIf.c line 286. @end ignore @findex ELSE This macro must only appear after an @code{IF} function, and before the associated @code{ENDIF} function. It denotes the start of an alternate template block for the @code{IF} function. For a complete description @xref{IF}. @node ENDDEF @subsection ENDDEF - Ends a macro definition. @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcDef.c line 595. @end ignore @findex ENDDEF This macro ends the @code{DEFINE} function template block. For a complete description @xref{DEFINE}. @node ENDFOR @subsection ENDFOR - Terminates the @code{FOR} function template block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 678. @end ignore @findex ENDFOR This macro ends the @code{FOR} function template block. For a complete description @xref{FOR}. @node ENDIF @subsection ENDIF - Terminate the @code{IF} Template Block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcIf.c line 132. @end ignore @findex ENDIF This macro ends the @code{IF} function template block. For a complete description @xref{IF}. @node ENDWHILE @subsection ENDWHILE - Terminate the @code{WHILE} Template Block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcIf.c line 215. @end ignore @findex ENDWHILE This macro ends the @code{WHILE} function template block. For a complete description @xref{WHILE}. @node ESAC @subsection ESAC - Terminate the @code{CASE} Template Block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 947. @end ignore @findex ESAC This macro ends the @code{CASE} function template block. For a complete description, @xref{CASE}. @node EXPR @subsection EXPR - Evaluate and emit an Expression @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcEval.c line 453. @end ignore @findex EXPR This macro does not have a name to cause it to be invoked explicitly, though if a macro starts with one of the apply codes or one of the simple expression markers, then an expression macro is inferred. The result of the expression evaluation (@pxref{expression syntax}) is written to the current output. @node FOR @subsection FOR - Emit a template block multiple times @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcFor.c line 599. @end ignore @findex FOR @cindex looping, for @cindex for loop This macro has a slight variation on the standard syntax: @example FOR [ ] FOR (...Scheme expression list) FOR IN "string" [ ... ] @end example Other than for the last form, the first macro argument must be the name of an AutoGen value. If there is no value associated with the name, the @code{FOR} template block is skipped entirely. The scope of the @code{FOR} macro extends to the corresponding @code{ENDFOR} macro. The last form will create an array of string values named @code{} that only exists within the context of this @code{FOR} loop. With this form, in order to use a @code{separator-string}, you must code it into the end of the template block using the @code{(last-for?)} predicate function (@pxref{SCM last-for?}). If there are any arguments after the @code{value-name}, the initial characters are used to determine the form. If the first character is either a semi-colon (@code{;}) or an opening parenthesis (@code{(}), then it is presumed to be a Scheme expression containing the FOR macro specific functions @code{for-from}, @code{for-by}, @code{for-to}, and/or @code{for-sep}. @xref{AutoGen Functions}. If it consists of an '@code{i}' an '@code{n}' and separated by white space from more text, then the @code{FOR x IN} form is processed. Otherwise, the remaining text is presumed to be a string for inserting between each iteration of the loop. This string will be emitted one time less than the number of iterations of the loop. That is, it is emitted after each loop, excepting for the last iteration. If the from/by/to functions are invoked, they will specify which copies of the named value are to be processed. If there is no copy of the named value associated with a particular index, the @code{FOR} template block will be instantiated anyway. The template must use methods for detecting missing definitions and emitting default text. In this fashion, you can insert entries from a sparse or non-zero based array into a dense, zero based array. @strong{NB:} the @code{for-from}, @code{for-to}, @code{for-by} and @code{for-sep} functions are disabled outside of the context of the @code{FOR} macro. Likewise, the @code{first-for}, @code{last-for} and @code{for-index} functions are disabled outside of the range of a @code{FOR} block. @strong{Also:} the @code{} must be a single level name, not a compound name (@pxref{naming values}). @example [+FOR var (for-from 0) (for-to ) (for-sep ",") +] ... text with @code{var}ious substitutions ...[+ ENDFOR var+] @end example @noindent this will repeat the @code{... text with @code{var}ious substitutions ...} +1 times. Each repetition, except for the last, will have a comma @code{,} after it. @example [+FOR var ",\n" +] ... text with @code{var}ious substitutions ...[+ ENDFOR var +] @end example @noindent This will do the same thing, but only for the index values of @code{var} that have actually been defined. @node IF @subsection IF - Conditionally Emit a Template Block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcIf.c line 96. @end ignore @findex IF @cindex conditional emit @cindex if test Conditional block. Its arguments are evaluated (@pxref{EXPR}) and if the result is non-zero or a string with one or more bytes, then the condition is true and the text from that point until a matched @code{ELIF}, @code{ELSE} or @code{ENDIF} is emitted. @code{ELIF} introduces a conditional alternative if the @code{IF} clause evaluated FALSE and @code{ELSE} introduces an unconditional alternative. @example [+IF +] emit things that are for the true condition[+ ELIF +] emit things that are true maybe[+ ELSE "This may be a comment" +] emit this if all but else fails[+ ENDIF "This may *also* be a comment" +] @end example @noindent @code{} may be any expression described in the @code{EXPR} expression function, including the use of apply-codes and value-names. If the expression yields an empty string, it is interpreted as @i{false}. @node INCLUDE @subsection INCLUDE - Read in and emit a template block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/functions.c line 177. @end ignore @findex INCLUDE The entire contents of the named file is inserted at this point. The contents of the file are processed for macro expansion. The arguments are eval-ed, so you may compute the name of the file to be included. The included file must not contain any incomplete function blocks. Function blocks are template text beginning with any of the macro functions @samp{CASE}, @samp{DEFINE}, @samp{FOR}, @samp{IF} and @samp{WHILE}; extending through their respective terminating macro functions. @node INVOKE @subsection INVOKE - Invoke a User Defined Macro @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcDef.c line 667. @end ignore @findex INVOKE User defined macros may be invoked explicitly or implicitly. If you invoke one implicitly, the macro must begin with the name of the defined macro. Consequently, this may @strong{not} be a computed value. If you explicitly invoke a user defined macro, the macro begins with the macro name @code{INVOKE} followed by a @i{basic expression} that must yield a known user defined macro. A macro name _must_ be found, or AutoGen will issue a diagnostic and exit. Arguments are passed to the invoked macro by name. The text following the macro name must consist of a series of names each of which is followed by an equal sign (@code{=}) and a @i{basic expression} that yields a string. The string values may contain template macros that are parsed the first time the macro is processed and evaluated again every time the macro is evaluated. @node RETURN @subsection RETURN - Leave an INVOKE-d (DEFINE) macro @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/functions.c line 93. @end ignore @findex RETURN This will unwind looping constructs inside of a DEFINE-d macro and return to the invocation point. The output files and diversions @i{are left alone}. This means it is unwise to start diversions in a DEFINEd macro and RETURN from it before you have handled the diversion. Unless you are careful. Here is some rope for you. Please be careful using it. @node SELECT @subsection SELECT - Selection block for CASE function @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcCase.c line 1280. @end ignore @findex SELECT This macro selects a block of text by matching an expression against the sample text expression evaluated in the @code{CASE} macro. @xref{CASE}. You do not specify a @code{SELECT} macro with the word ``select''. Instead, you must use one of the 19 match operators described in the @code{CASE} macro description. @node UNKNOWN @subsection UNKNOWN - Either a user macro or a value name. @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/functions.c line 241. @end ignore @findex UNKNOWN The macro text has started with a name not known to AutoGen. If, at run time, it turns out to be the name of a defined macro, then that macro is invoked. If it is not, then it is a conditional expression that is evaluated only if the name is defined at the time the macro is invoked. You may not specify @code{UNKNOWN} explicitly. @node WHILE @subsection WHILE - Conditionally loop over a Template Block @ignore Generated from auto_gen.tpl line 538. Extracted from /old-home/bkorb/ag/ag/agen5/funcIf.c line 188. @end ignore @findex WHILE @cindex conditional emit @cindex while test Conditionally repeated block. Its arguments are evaluated (@pxref{EXPR}) and as long as the result is non-zero or a string with one or more bytes, then the condition is true and the text from that point until a matched @code{ENDWHILE} is emitted. @example [+WHILE +] emit things that are for the true condition[+ ENDWHILE +] @end example @noindent @code{} may be any expression described in the @code{EXPR} expression function, including the use of apply-codes and value-names. If the expression yields an empty string, it is interpreted as @i{false}. @ignore START == AUGMENTING == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @c === SECTION MARKER @node output controls @section Redirecting Output @cindex Redirecting Output @cindex diversion AutoGen provides a means for redirecting the template output to different files or, in @file{M4} parlance, to various diversions. It is accomplished by providing a set of Scheme functions named @code{out-*} (@pxref{AutoGen Functions}). @table @samp @item out-push-new (@pxref{SCM out-push-new}) This allows you to logically "push" output files onto a stack. If you supply a string name, then a file by that name is created to hold the output. If you do not supply a name, then the text is written to a scratch pad and retrieved by passing a ``@code{#t}'' argument to the @code{out-pop} (@pxref{SCM out-pop}) function. @item out-pop (@pxref{SCM out-pop}) This function closes the current output file and resumes output to the next one in the stack. At least one output must have been pushed onto the output stack with the @code{out-push-new} (@pxref{SCM out-push-new}) function. If ``@code{#t}'' is passed in as an argument, then the entire contents of the diversion (or file) is returned. @item out-suspend (@pxref{SCM out-suspend}) This function does not close the current output, but instead sets it aside for resumption by the given name with @code{out-resume}. The current output must have been pushed on the output queue with @code{out-push-new} (@pxref{SCM out-push-new}). @item out-resume (@pxref{SCM out-resume}) This will put a named file descriptor back onto the top of stack so that it becomes the current output again. @item out-switch (@pxref{SCM out-switch}) This closes the current output and creates a new file, purging any preexisting one. This is a shortcut for "pop" followed by "push", but this can also be done at the base level. @item out-move (@pxref{SCM out-move}) Renames the current output file without closing it. @end table There are also several functions for determining the output status. @xref{AutoGen Functions}. @ignore * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @end ignore @page @node Augmenting AutoGen @chapter Augmenting AutoGen Features @cindex Augmenting AutoGen AutoGen was designed to be simple to enhance. You can do it by providing shell commands, Guile/Scheme macros or callout functions that can be invoked as a Guile macro. Here is how you do these. @menu * shell commands:: Shell Output Commands * guile macros:: Guile Macros * guile callouts:: Guile Callout Functions * AutoGen macros:: AutoGen Macros @end menu @c === SECTION MARKER @node shell commands @section Shell Output Commands Shell commands are run inside of a server process. This means that, unlike @file{make}, context is kept from one command to the next. Consequently, you can define a shell function in one place inside of your template and invoke it in another. You may also store values in shell variables for later reference. If you load functions from a file containing shell functions, they will remain until AutoGen exits. If your shell script should determine that AutoGen should stop processing, the recommended method for stopping AutoGen is: @example die "some error text" @end example @noindent That is a shell function added by AutoGen. It will send a SIGTERM to autogen and exit from the "persistent" shell. @c === SECTION MARKER @node guile macros @section Guile Macros Guile also maintains context from one command to the next. This means you may define functions and variables in one place and reference them elsewhere. You also may load Guile macro definitions from a Scheme file by using the @code{--load-scheme} command line option (@pxref{autogen load-scheme}). Beware, however, that the AutoGen specific scheme functions have not been loaded at this time, so though you may define functions that reference them, do not invoke the AutoGen functions at this time. If your Scheme script should determine that AutoGen should stop processing, the recommended method for stopping AutoGen is: @example (error "some error text") @end example @c === SECTION MARKER @node guile callouts @section Guile Callout Functions Callout functions must be registered with Guile to work. This can be accomplished either by putting your routines into a shared library that contains a @code{void scm_init( void )} routine that registers these routines, or by building them into AutoGen. To build them into AutoGen, you must place your routines in the source directory and name the files @file{exp*.c}. You also must have a stylized comment that @file{getdefs} can find that conforms to the following: @example /*=gfunc * * what: * general_use: * string: * exparg: , [, ['optional'] [, 'list']] * doc: A long description telling people how to use * this function. =*/ SCM ag_scm_( SCM arg_name[, ...] ) @{ @} @end example @table @samp @item gfunc You must have this exactly thus. @item This must follow C syntax for variable names @item This should be about a half a line long. It is used as a subsection title in this document. @item general_use: You must supply this unless you are an AutoGen maintainer and are writing a function that queries or modifies the state of AutoGen. @item Normally, the @code{function-name} string will be transformed into a reasonable invocation name. However, that is not always true. If the result does not suit your needs, then supply an alternate string. @item exparg: You must supply one for each argument to your function. All optional arguments must be last. The last of the optional arguments may be a list, if you choose. @item doc: Please say something meaningful. @item [, ...] Do not actually specify an ANSI ellipsis here. You must provide for all the arguments you specified with @code{exparg}. @end table See the Guile documentation for more details. More information is also available in a large comment at the beginning of the @file{agen5/snarf.tpl} template file. @c === SECTION MARKER @node AutoGen macros @section AutoGen Macros There are two kinds@: those you define yourself and AutoGen native. The user-defined macros may be defined in your templates or loaded with the @code{--lib-template} option (See @ref{DEFINE} and @ref{autogen lib-template}). As for AutoGen native macros, do not add any. It is easy to do, but I won't like it. The basic functions needed to accomplish looping over and selecting blocks of text have proved to be sufficient over a period of several years. New text transformations can be easily added via any of the AutoGen extension methods, as discussed above. @ignore END == AUGMENTING == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @ignore Invocation section from invoke-autogen.texi @end ignore @page @include invoke-autogen.texi @ignore START == INSTALLATION == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @page @node Installation @chapter Configuring and Installing @menu * configuring:: Configuring AutoGen * AutoGen CGI:: AutoGen as a CGI server * signal names:: Signal Names * installing:: Installing AutoGen @end menu @c === SECTION MARKER @node configuring @section Configuring AutoGen @cindex configuring AutoGen is configured and built using Libtool, Automake and Autoconf. Consequently, you can install it wherever you wish using the various @samp{--prefix} options. To the various configuration options supplied by these tools, AutoGen adds a few of its own: @table @samp @item --disable-shell AutoGen is now capable of acting as a CGI forms server, @xref{AutoGen CGI}. As such, it will gather its definitions using either @samp{GET} or @samp{POST} methods. All you need to do is have a template named @file{cgi.tpl} handy or specify a different one with a command line option. However, doing this without disabling the server shell brings considerable risk. If you were to pass user input to a script that contained, say, the classic "@samp{`rm -rf /`}", you might have a problem. This configuration option will cause shell template commands to simply return the command string as the result. No mistakes. Much safer. Strongly recommended. The default is to have server shell scripting enabled. Disabling the shell will have some build side effects, too. @itemize @bullet @item Many of the make check tests will fail, since they assume a working server shell. @item The getdefs and columns programs are not built. The options are distributed as definition files and they cannot be expanded with a shell-disabled AutoGen. @item Similarly, the documentation cannot be regenerated because the documentation templates depend on subshell functionality. @end itemize @item --enable-debug Turning on AutoGen debugging enables very detailed inspection of the input definitions and monitoring shell script processing. These options are not particularly useful to anyone not directly involved in maintaining AutoGen. If you do choose to enable AutoGen debugging, be aware that the usage page was generated without these options, so when the build process reaches the documentation rebuild, there will be a failure. @samp{cd} into the @file{agen5} build directory, @samp{make} the @samp{autogen.texi} file and all will be well thereafter. @item --with-regex-header @itemx --with-header-path @itemx --with-regex-lib These three work together to specify how to compile with and link to a particular POSIX regular expression library. The value for @file{--with-regex-header=value} must be the name of the relevant header file. The AutoGen sources will attempt to include that source with a @code{#include } C preprocessing statement. The @code{path} from the @file{--with-header-path=path} will be added to @code{CPPFLAGS} as @file{-Ipath}. The @code{lib-specs} from @file{--with-regex-lib=lib-specs} will be added to @code{LDFLAGS} without any adornment. @end table @c === SECTION MARKER @page @node AutoGen CGI @section AutoGen as a CGI server AutoGen is now capable of acting as a CGI forms server. It behaves as a CGI server if the definitions input is from stdin and the environment variable @code{REQUEST_METHOD} is defined and set to either "GET" or "POST". If set to anything else, AutoGen will exit with a failure message. When set to one of those values, the CGI data will be converted to AutoGen definitions (@pxref{Definitions File}) and the template named "@code{cgi.tpl}" will be processed. This works by including the name of the real template to process in the form data and having the "@code{cgi.tpl}" template include that template for processing. I do this for processing the form @url{http://autogen.sourceforge.net/conftest.html}. The "@code{cgi.tpl}" looks approximately like this: @example @end example @noindent This forces the template to be found in the "@code{cgi-tpl/}" directory. Note also that there is no suffix specified in the pseudo macro (@pxref{pseudo macro}). That tells AutoGen to emit the output to @file{stdout}. The output is actually spooled until it is complete so that, in the case of an error, the output can be discarded and a proper error message can be written in its stead. @strong{Please also note} that it is advisable, @emph{especially} for network accessible machines, to configure AutoGen (@pxref{configuring}) with shell processing disabled (@code{--disable-shell}). That will make it impossible for any referenced template to hand data to a subshell for interpretation. @c === SECTION MARKER @node signal names @section Signal Names @cindex Signal Names When AutoGen is first built, it tries to use @code{psignal(3)}, @code{sys_siglist}, @code{strsigno(3)} and @code{strsignal(3)} from the host operating system. If your system does not supply these, the AutoGen distribution will. However, it will use the distributed mapping and this mapping is unlikely to match what your system uses. This can be fixed. Once you have installed autogen, the mapping can be rebuilt on the host operating system. To do so, you must perform the following steps: @enumerate @item Build and install AutoGen in a place where it will be found in your search path. @item @code{cd $@{top_srcdir@}/compat} @item @code{autogen strsignal.def} @item Verify the results by examining the @file{strsignal.h} file produced. @item Re-build and re-install AutoGen. @end enumerate If you have any problems or peculiarities that cause this process to fail on your platform, please send me copies of the header files containing the signal names and numbers, along with the full path names of these files. I will endeavor to fix it. There is a shell script inside of @file{strsignal.def} that tries to hunt down the information. @c === SECTION MARKER @node installing @section Installing AutoGen @cindex Installing There are several files that get installed. The number depend whether or not both shared and archive libraries are to be installed. The following assumes that everything is installed relative to @code{$prefix}. You can, of course, use @code{configure} to place these files where you wish. @strong{NB}@: AutoGen does not contain any compiled-in path names. All support directories are located via option processing, the environment variable @code{HOME} or finding the directory where the executable came from. The installed files are: @enumerate @item The executables in @file{bin} (autogen, getdefs and columns). @item The AutoOpts link libraries as @file{lib/libopts.*}. @item An include file in @file{include/options.h}, needed for Automated Option Processing (see next chapter). @item Several template files and a scheme script in @file{share/autogen}, needed for Automated Option Processing (@pxref{AutoOpts}), parsing definitions written with scheme syntax (@pxref{Dynamic Text}), the templates for producing documentation for your program (@pxref{documentation attributes}), autoconf test macros, and AutoFSM. @item Info-style help files as @file{info/autogen.info*}. These files document AutoGen, the option processing library AutoOpts, and several add-on components. @item The three man pages for the three executables are installed in man/man1. @end enumerate This program, library and supporting files can be installed with three commands: @itemize @bullet @item /configure [ ] @item make @item make install @end itemize However, you may wish to insert @code{make check} before the @code{make install} command. If you do perform a @code{make check} and there are any failures, you will find the results in @code{/test/FAILURES}. Needless to say, I would be interested in seeing the contents of those files and any associated messages. If you choose to go on and analyze one of these failures, you will need to invoke the test scripts individually. You may do so by specifying the test (or list of test) in the TESTS make variable, thus: @example gmake TESTS=test-name.test check @end example I specify @code{gmake} because most makes will not let you override internal definitions with command line arguments. @code{gmake} does. All of the AutoGen tests are written to honor the contents of the @t{VERBOSE} environment variable. Normally, any commentary generated during a test run is discarded unless the @t{VERBOSE} environment variable is set. So, to see what is happening during the test, you might invoke the following with @i{bash} or @i{ksh}: @example VERBOSE=1 gmake TESTS="for.test forcomma.test" check @end example @noindent Or equivalently with @i{csh}: @example env VERBOSE=1 gmake TESTS="for.test forcomma.test" check @end example @ignore END == INSTALLATION == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore@page @node AutoOpts @chapter Automated Option Processing @cindex autoopts AutoOpts 36.5 is bundled with AutoGen. It is a tool that virtually eliminates the hassle of processing options and keeping man pages, info docs and usage text up to date. This package allows you to specify several program attributes, up to a hundred option types and many option attributes. From this, it then produces all the code necessary to parse and handle the command line and configuration file options, and the documentation that should go with your program as well. @ignore START == AUTOOPTS == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore All the features notwithstanding, some applications simply have well-established command line interfaces. Even still, those programs may use the configuration file parsing portion of the library. See the ``AutoOpts Features'' and ``Configuration File Format'' sections. @menu * Features:: AutoOpts Features * Licensing:: AutoOpts Licensing * Caveats:: Developer and User Notes * Quick Start:: Quick Start * Option Definitions:: Option Definitions * AutoOpts API:: Programmatic Interface * Multi-Threading:: Multi-Threading * option descriptor:: Option Descriptor File * Using AutoOpts:: Using AutoOpts * Presetting Options:: Configuring your program * Config File Format:: Configuration File Format * shell options:: AutoOpts for Shell Scripts * AutoInfo:: Automated Info Docs * AutoMan pages:: Automated Man Pages * getopt_long:: Using getopt(3C) * i18n:: Internationalizing AutoOpts * Naming Conflicts:: Naming Conflicts * All Attribute Names:: All Attribute Names * Option Define Names:: Option Definition Name Index @end menu @c === SECTION MARKER @node Features @section AutoOpts Features @cindex features AutoOpts supports option processing; option state saving; and program documentation with innumerable features. Here, we list a few obvious ones and some important ones, but the full list is really defined by all the attributes defined in the @ref{Option Definitions} section. @enumerate @item POSIX-compliant short (flag) option processing. @item GNU-style long options processing. Long options are recognized without case sensitivity, and they may be abbreviated. @item Environment variable initializations, @xref{environrc}. @item Initialization from configuration files (aka RC or INI files), and saving the option state back into one, @xref{loading rcfile}. @item Config files may be partitioned. One config file may be used by several programs by partitioning it with lines containing, ``@code{[PROGRAM_NAME]}'' or ``@code{}'', @xref{loading rcfile}. @item Config files may contain AutoOpts directives. ``@code{}'' may be used to set @code{AutoOpts} option processing options. Viz., @code{GNU} usage layout versus @code{AutoOpts} conventional layout, and @code{misuse-usage} versus @code{no-misuse-usage}, @xref{usage attributes}. @item Options may be marked as @code{@i{dis}-abled} with a disablement prefix. Such options may default to either an enabled or a disabled state. You may also provide an enablement prefix, too, e.g., @code{--allow-mumble} and @code{--prevent-mumble} (@pxref{Common Attributes}). @item Verify that required options are present between the minimum and maximum number of times on the command line. Verify that conflicting options do not appear together. Verify that options requiring the presence of other options are, in fact, used in the presence of other options. See @xref{Common Attributes}, and @xref{Option Conflict Attributes}. @item There are several @ref{automatic options, automatically supported options}. They will have short flags if any options have option flags and the flags are not suppressed. The associated flag may be altered or suppressed by specifying no value or an alternate character for ``@code{xxx-value;}'' in the option definition file. ``@code{xxx}'' is the name of the option below: @table @samp @item --help @itemx --more-help These are always available. @samp{--more-help} will pass the full usage text through a pager. @item --usage @vindex usage-opt This is added to the option list if @code{usage-opt} is specified. It yields the abbreviated usage to @file{stdout}. @item --version This is added to the option list if @code{version = xxx;} is specified. @item --load-opts @itemx --save-opts These are added to the option list if @code{homerc} is specified. Mostly. If, @code{disable-save} is specified, then @samp{--save-opts} is disabled. @end table @item Various forms of main procedures can be added to the output, @xref{Generated main}. There are four basic forms: @enumerate a @item A program that processes the arguments and writes to standard out portable shell commands containing the digested options. @item A program that will generate portable shell commands to parse the defined options. The expectation is that this result will be copied into a shell script and used there. @item A ``for-each'' main that will invoke a named function once for either each non-option argument on the command line or, if there are none, then once for each non-blank, non-comment input line read from stdin. @item A main procedure of your own design. Its code can be supplied in the option description template or by incorporating another template. @end enumerate @item There are several methods for handling option arguments. @itemize @bullet @item nothing (@pxref{OPT_ARG}) option argument strings are globally available. @item user supplied (@pxref{Option Argument Handling}) @item stack option arguments (@pxref{Option Argument Handling}) @item integer numbers (@pxref{arg-type number}) @item true or false valued (@pxref{arg-type boolean}) @item enumerated list of names (@pxref{arg-type keyword}) @item an enumeration (membership) set (@pxref{arg-type set membership}) @item a list of name/value pairs (option ``subopts'') (@pxref{arg-type hierarchy}) @item a time duration or a specific time and date @item validated file name (@pxref{arg-type file name}) @item optional option argument (@pxref{arg-optional}) @end itemize @item The generated usage text can be emitted in either AutoOpts standard format (maximizing the information about each option), or GNU-ish normal form. The default form is selected by either specifying or not specifying the @code{gnu-usage} attribute (@pxref{information attributes}). This can be overridden by the user himself with the @code{AUTOOPTS_USAGE} environment variable. If it exists and is set to the string @code{gnu}, it will force GNU-ish style format; if it is set to the string @code{autoopts}, it will force AutoOpts standard format; otherwise, it will have no effect. @item The usage text and many other strings are stored in a single character array (@pxref{SCM string-table-new,string table functions}). This reduces fixup costs when loading the program or library. The downside is that if GCC detects that any of these strings are used in a printf format, you may get the warning, @code{embedded '\0' in format}. To eliminate the warning, you must provide GCC with the @code{-Wno-format-contains-nul} option. @item If you compile with @code{ENABLE_NLS} defined and @code{_()} defined to a localization function (e.g. @code{gettext(3GNU)}), then the option processing code will be localizable (@pxref{i18n}). Provided also that you do not define the @code{no-xlate} attribute to @emph{anything} (@pxref{presentation attributes}). @item Provides a callable routine to parse a text string as if it were from one of the rc/ini/config files, hereafter referred to as a configuration file. @item By adding a @samp{doc} and @samp{arg-name} attributes to each option, AutoGen will also be able to produce a man page and the @samp{invoking} section of a texinfo document. @item Intermingled option processing. AutoOpts options may be intermingled with command line operands and options processed with other parsing techniques. This is accomplished by setting the @code{allow-errors} (@pxref{program attributes}) attribute. When processing reaches a point where @code{optionProcess} (@pxref{libopts-optionProcess}) needs to be called again, the current option can be set with @code{RESTART_OPT(n)} (@pxref{RESTART_OPT}) before calling @code{optionProcess}. See: @xref{library attributes}. @item Library suppliers can specify command line options that their client programs will accept. They specify option definitions that get @code{#include}-d into the client option definitions and they specify an "anchor" option that has a callback and must be invoked. That will give the library access to the option state for their options. @item library options. An AutoOpt-ed library may export its options for use in an AutoOpt-ed program. This is done by providing an option definition file that client programs @code{#include} into their own option definitions. See ``AutoOpt-ed Library for AutoOpt-ed Program'' (@pxref{lib and program}) for more details. @end enumerate @c === SECTION MARKER @node Licensing @section AutoOpts Licensing @cindex Licensing When AutoGen is installed, the AutoOpts project is installed with it. AutoOpts includes various AutoGen templates and a pair of shared libraries. These libraries may be used under the terms of version 3 of the GNU Lesser General Public License (LGPL). One of these libraries (@code{libopts}) is needed by programs that are built using AutoOpts generated code. This library is available as a separate ``tear-off'' source tarball. It is redistributable for use under either of two licenses: The above mentioned GNU Lesser General Public License, and the advertising-clause-free BSD license. Both of these license terms are incorporated into appropriate COPYING files included with the @code{libopts} source tarball. This source may be incorporated into your package with the following simple commands: @example rm -rf libopts libopts-* gunzip -c `autoopts-config libsrc` | \ tar -xvf - mv libopts-*.*.* libopts @end example View the @file{libopts/README} file for further integration information. @c === SECTION MARKER @page @node Caveats @section Developer and User Notes AutoOpts has its conventional way of displaying option information that includes somewhat more information that the standard GNU method. AutoOpts will also print out a line of usage text for each option type when options are misspecified. GNU programs typically do not do this. These defaults can be changed on a per-program basis by adding either or both of the following in the option definition file: @example gnu-usage; no-misuse-usage; @end example Users may also override these settings with the @code{AUTOOPTS_USAGE} environment variable. It may be set to a comma or white space separated list of the following strings: @table @samp @item gnu @cindex gnu The format of the extended usage text will be displayed in GNU-normal form. The default display for @code{--version} will be to include a note on licensing terms. @item autoopts @cindex autoopts The format of the extended usage will be in AutoOpts' native layout. @item no-misuse-usage @cindex no-misuse-usage When an option error is made on the command line, the abbreviated usage text will be suppressed. @item misuse-usage @cindex misuse-usage When an option error is made on the command line, the abbreviated usage text will be shown. @end table @noindent The setting used is the last one seen. The @code{autoopts} and @code{misuse-usage} serve no purpose, unless the definition file entries were specified as above. @b{Note for developers}: The templates used to implement AutoOpts depend heavily upon token pasting. That mens that if you name an option, ``debug'', for example, the generated header will expect to be able to emit @code{#define} macros such as this: @example #define DESC(n) (autogenOptions.pOptDesc[INDEX_OPT_## n]) @end example and expect @code{DESC(DEBUG)} to expand correctly into @code{(autogenOptions.pOptDesc[INDEX_OPT_DEBUG])}. If @code{DEBUG} is @code{#defined} to something else, then that something else will be in the above expansion. If you discover you are having strange problems like this, you may wish to use some variation of the @code{guard-option-names} @xref{program attributes}. @c === SECTION MARKER @page @node Quick Start @section Quick Start @cindex example, simple AutoOpts Since it is generally easier to start with a simple example than it is to look at the options that AutoGen uses itself, here is a very simple AutoOpts example. You can copy this example out of the Info file and into a source file to try it. You can then embellish it into what you really need. For more extensive examples, you can also examine the help output and option definitions for the commands @code{columns}, @code{getdefs} and @code{autogen} itself. For our simple example, assume you have a program named @code{check} that takes two options: @enumerate @item A list of directories to check over for whatever it is @code{check} does. You want this option available as a POSIX-style flag option and a GNU long option. You want to allow as many of these as the user wishes. @item An option to show or not show the definition tree being used. Only one occurrence is to be allowed, specifying one or the other. @end enumerate @ignore END == AUTOOPTS == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @noindent First, specify your program attributes and its options to AutoOpts, as with the following example. @example AutoGen Definitions options; prog-name = check; prog-title = "Checkout Automated Options"; long-opts; gnu-usage; /* GNU style preferred to default */ main = @{ main-type = shell-process; @}; flag = @{ name = check-dirs; value = L; /* flag style option character */ arg-type = string; /* option argument indication */ max = NOLIMIT; /* occurrence limit (none) */ stack-arg; /* save opt args in a stack */ descrip = "Checkout directory list"; doc = 'name of each directory that is to be "checked out".'; @}; flag = @{ name = show_defs; descrip = "Show the definition tree"; disable = dont; /* mark as enable/disable type */ /* option. Disable as `dont-' */ doc = 'disable, if you do not want to see the tree.'; @}; @end example @noindent This program will produce a program that digests its options and writes the values as shell script code to stdout. Run the following short script to produce this program: @example base=check BASE=`echo $base | tr a-z- A-Z_` cflags="-DTEST_$@{BASE@} `autoopts-config cflags`" ldflags="`autoopts-config ldflags`" autogen $@{base@}.def cc -o $@{base@} -g $@{cflags@} $@{base@}.c $@{ldflags@} ./$@{base@} --help @end example @noindent Running those commands yields: @example check - Checkout Automated Options USAGE: check [ - [] | --[@{=| @}] ]... -L, --check-dirs=str Checkout directory list - may appear multiple times --show-defs Show the definition tree - disabled as --dont-show-defs -?, --help Display extended usage information and exit -!, --more-help Extended usage information passed thru pager Options are specified by doubled hyphens and their name or by a single hyphen and the flag character. Packaged by Bruce (2012-08-11) Report check bugs to bkorb@@gnu.org @end example @ignore START == AUTOOPTS-MAIN == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @noindent Normally, however, you would not use the ``main'' clause. Instead, the file would be named something like @file{checkopt.def}, you would compile @file{checkopt.c} the usual way, and link the object with the rest of your program. The options are processed by calling @code{optionProcess} (@pxref{libopts-optionProcess}): @example main( int argc, char** argv ) @{ @{ int optct = optionProcess( &checkOptions, argc, argv ); argc -= optct; argv += optct; @} @end example The options are tested and used as in the following fragment. ``@code{ENABLED_OPT}'' is used instead of ``@code{HAVE_OPT}'' for the @code{show-defs} option because it is an enabled/disabled option type: @example if ( ENABLED_OPT( SHOW_DEFS ) && HAVE_OPT( CHECK_DIRS )) @{ int dirct = STACKCT_OPT( CHECK_DIRS ); char** dirs = STACKLST_OPT( CHECK_DIRS ); while (dirct-- > 0) @{ char* dir = *dirs++; ... @end example The ``doc'' clauses are used in the flag stanzas for man pages and texinfo invoking documentation. With the above definition file, the two following commands will produce the two documentation files @file{check.1} and @file{invoke-check.texi}. The latter file will be generated as a chapter, rather than a section or subsection. @example autogen -Tagman-cmd check.def autogen -DLEVEL=chapter -Tagtexi-cmd -binvoke-check.texi check.def @end example @noindent The result of which is left as an exercise for the reader. A lot of magic happens to make this happen. The rest of this chapter will describe the myriad of option attributes supported by AutoOpts. However, keep in mind that, in general, you won't need much more than what was described in this "quick start" section. @node Option Definitions @section Option Definitions @cindex Option Definitions AutoOpts uses an AutoGen definitions file for the definitions of the program options and overall configuration attributes. The complete list of program and option attributes is quite extensive, so if you are reading to understand how to use AutoOpts, I recommend reading the "Quick Start" section (@pxref{Quick Start}) and paying attention to the following: @enumerate @item @code{prog-name}, @code{prog-title}, and @code{argument}, program attributes, @xref{program attributes}. @item @code{name} and @code{descrip} option attributes, @xref{Required Attributes}. @item @code{value} (flag character) and @code{min} (occurrence counts) option attributes, @xref{Common Attributes}. @item @code{arg-type} from the option argument specification section, @xref{Option Arguments}. @item Read the overall how to, @xref{Using AutoOpts}. @item Highly recommended, but not required, are the several "man" and "info" documentation attributes, @xref{documentation attributes}. @end enumerate Keep in mind that the majority are rarely used and can be safely ignored. However, when you have special option processing requirements, the flexibility is there. @menu * program attributes:: Program Description Attributes * library attributes:: Options for Library Code * information attributes:: Program Information Attributes * Generated main:: Generating main procedures * option attributes:: Option Attributes * Option Arguments:: Option Argument Specification * Option Argument Handling:: Option Argument Handling * Internationalizing Options:: Internationalizing Options * documentation attributes:: Man and Info doc Attributes * automatic options:: Automatically Supported Options * standard options:: Library of Standard Options @end menu @node program attributes @subsection Program Description Attributes @cindex program attributes The following global definitions are used to define attributes of the entire program. These generally alter the configuration or global behavior of the AutoOpts option parser. The first two are required of every program. The third is required if there are to be any left over arguments (operands) after option processing. The rest have been grouped below. Except as noted, there may be only one copy of each of these definitions: @table @samp @item prog-name @vindex prog-name This attribute is required. Variable names derived from this name are derived using @code{string->c_name!} (@pxref{SCM string->c-name!}). @item prog-title @vindex prog-title This attribute is required and may be any descriptive text. @item argument @vindex argument This attribute is required if your program uses operand arguments. It specifies the syntax of the arguments that @strong{follow} the options. It may not be empty, but if it is not supplied, then option processing must consume all the arguments. If it is supplied and starts with an open bracket (@code{[}), then there is no requirement on the presence or absence of command line arguments following the options. Lastly, if it is supplied and does not start with an open bracket, then option processing must @strong{not} consume all of the command line arguments. @item config-header @vindex config-header If your build has a configuration header, it must be included before anything else. Specifying the configuration header file name with this attribute will cause that to happen. @end table @menu * usage attributes:: Usage and Version Info Display * config attributes:: Program Configuration * programming attributes:: Programming Details * presentation attributes:: User Presentation Attributes @end menu @c @c = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = @c @node usage attributes @subsubsection Usage and Version Info Display These will affect the way usage is seen and whether or not version information gets displayed. @table @samp @item full-usage @vindex full-usage If this attribute is provided, it may specify the full length usage text, or a variable name assignable to a ``char const *'' pointer, or it may be empty. The meanings are determined by the length. @itemize @bullet @item If not provided, the text will be computed as normal. @item If the length is zero, then the usage text will be derived from the current settings and inserted as text into the generated .c file. @item If the length is 1 to 32 bytes, then it is presumed to be a variable name that either points to or is an array of const chars. @item If it is longer than that, it is presumed to be the help text itself. This text will be inserted into the generated .c file. @end itemize This string should be readily translatable. Provision will be made to translate it if this is provided, if the source code is compiled with @code{ENABLE_NLS} defined, and @code{no-xlate} has not been set to the value @emph{anything}. @item short-usage @vindex short-usage If this attribute is provided, it is used to specify an abbreviated version of the usage text. This text is constructed in the same way as the ``full-usage'', described above. @item gnu-usage @vindex gnu-usage AutoOpts normaly displays usage text in a format that provides more information than the standard GNU layout, but that also means it is not the standard GNU layout. This attribute changes the default to GNU layout, with the @code{AUTOOPTS_USAGE} environment variable used to request @code{autoopts} layout. See @xref{Caveats, Developer and User Notes}. @item usage-opt @vindex usage-opt I apologize for too many confusing usages of usage. This attribute specifies that @code{--usage} and/or @code{-u} be supported. The help (usage) text displayed will be abbreviated when compared to the default help text. @item no-misuse-usage @vindex no-misuse-usage When there is a command line syntax error, by default AutoOpts will display the abbreviated usage text, rather than just a one line ``you goofed it, ask for usage'' message. You can change the default behavior for your program by supplying this attribute. The user may override this choice, again, with the @code{AUTOOPTS_USAGE} environment variable. See @xref{Caveats, Developer and User Notes}. @item prog-group @vindex prog-group The version text in the @file{getopt.tpl} template will include this text in parentheses after the program name, when this attribute is specified. For example: @example mumble (stumble) 1.0 @end example @noindent says that the ``@code{mumble}'' program is version 1.0 and is part of the ``@code{stumble}'' group of programs. @item usage @vindex usage If your program has some cleanup work that must be done before exiting on usage mode issues, or if you have to customize the usage message in some way, specify this procedure and it will be called instead of the default @code{optionUsage()} function. For example, if a program is using the curses library and needs to invoke the usage display, then you must arrange to call @code{endwin()} before invoking the library function @code{optionUsage()}. This can be handled by specifying your own usage function, thus: @example void my_usage(tOptions * opts, int ex) @{ if (curses_window_active) endwin(); optionUsage(opts, ex); @} @end example @item version @vindex version Specifies the program version and activates the VERSION option, @xref{automatic options}. @end table @c @c = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = @c @node config attributes @subsubsection Program Configuration Programs may be ``pre-configured'' before normal command line options are processed (See @pxref{Immediate Action, Immediate Action Attributes}). How configuration files and environment variables are handled get specified with these attributes. @table @samp @item disable-load @itemx disable-save @vindex disable-load @vindex disable-save Indicates that the command line usage of @code{--load-opts} and/or @code{--save-opts} are disallowed. @item environrc @vindex environrc Indicates looking in the environment for values of variables named, @code{PROGRAM_OPTNAME} or @code{PROGRAM}, where @code{PROGRAM} is the upper cased @code{C-name} of the program and @code{OPTNAME} is the upper cased @code{C-name} of a specific option. The contents of the @code{PROGRAM} variable, if found, are tokenized and processed. The contents of @code{PROGRAM_OPTNAME} environment variables are taken as the option argument to the option nameed @code{optname}. @item homerc @vindex homerc Specifies that option settings may be loaded from and stored into configuration files. Each instance of this attribute is either a directory or a file using a specific path, a path based on an environment variable or a path relative to installation directories. The method used depends on the name. If the one entry is empty, it enables the loading and storing of settings, but no specific files are searched for. Otherwise, a series of configuration files are hunted down and, if found, loaded. If the first character of the @samp{homerc} value is not the dollar character (@code{$}), then it is presumed to be a path name based on the current directory. Otherwise, the method depends on the second character: @table @code @item $ The path is relative to the directory where the executable was found. @item @@ The path is relative to the package data directory, e.g. @code{/usr/local/share/autogen}. @item [a-zA-Z] The path is derived from the named environment variable. @end table Use as many as you like. The presence of this attribute activates the @code{--save-opts} and @code{--load-opts} options. However, saving into a file may be disabled with the @samp{disable-save}. @xref{loading rcfile}. See the @code{optionMakePath(3AGEN)} man page for excruciating details. @item rcfile @vindex rcfile Specifies the configuration file name. This is only useful if you have provided at least one @code{homerc} attribute. @example default: .rc @end example @item vendor-opt @vindex vendor-opt This option implements the @code{-W} vendor option command line option. For POSIX specified utilities, the options are constrained to the options that are specified by POSIX. Extensions should be handled with @code{-W} command line options, the short flag form. Long option name processing must be disabled. In fact, the @code{long-opts} attribute must not be provided, and some options must be specified without flag values. The @code{-W long-name} is processed by looking up the long option name that follows it. It cannot be a short flag because that would conflict with the POSIX flag name space. It will be processed as if long options were accepted and @code{--long-name} were found on the command line. @end table @c @c = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = @c @node programming attributes @subsubsection Programming Details These attributes affect some of the ways that the option data are used and made available to the program. @table @samp @item config-header @vindex config-header The contents of this attribute should be just the name of the configuration file. A "#include" naming this file will be inserted at the top of the generated header. @item exit-name @itemx exit-desc @vindex exit-name @vindex exit-desc These values should be defined as indexed values, thus: @example exit-name[0] = success; exit-desc[0] = 'Successful program execution.'; exit-name[1] = failure; exit-desc[1] = 'The operation failed or command syntax was not valid.'; @end example By default, all programs have these effectively defined for them. They may be overridden by explicitly defining any or all of these values. Additional names and descriptions may be defined. They will cause an enumeration to be emitted, like this one for @code{getdefs}: @example typedef enum @{ GETDEFS_EXIT_SUCCESS = 0, GETDEFS_EXIT_FAILURE = 1 @} getdefs_exit_code_t; @end example @noindent which will be augmented by any @code{exit-name} definitions beyond ``1''. @item usage-message @vindex usage-message This attribute will cause two procedures to be added to the code file: @code{usage_message} and @code{vusage_message}, with any applicable prefix (see @code{prefix}, below). They are declared in the generated header, thus: @example extern void vusage_message(char const * fmt, va_list ap); extern void usage_message(char const * fmt, ...); @end example @noindent These functions print the message to @file{stderr} and invoke the usage function with the exit code set to @code{1} (@code{EXIT_FAILURE}). @item die-code @vindex die-code This tells AutoOpts templates to emit code for @code{vdie}, @code{die} and @code{fserr} functions. If the @code{die-code} is assigned a text value, then that code will be inserted in the @code{vdie} function immediately before it prints the death rattle message. The profiles for these functions are: @example extern void vdie( int exit_code, char const * fmt, va_list); extern void die( int exit_code, char const * fmt, ...); extern void fserr(int exit_code, char const * op, char const * fname); @end example @item export @vindex export This string is inserted into the .h interface file. Generally used for global variables or @code{#include} directives required by @code{flag-code} text and shared with other program text. Do not specify your configuration header (@file{config.h}) in this attribute or the @code{include} attribute, however. Instead, use @code{config-header}, above. @item guard-option-names @vindex guard-option-names AutoOpts generates macros that presume that there are no @code{cpp} macros with the same name as the option name. For example, if you have an option named, @code{debug}, then you must not use @code{#ifdef DEBUG} in your code. If you specify this attribute, every option name will be guarded. If the name is @code{#define}-d, then a warning will be issued and the name undefined. If you do not specify this and there is a conflict, you will get strange error messages. This attribute may be set to any of four recognized states: @itemize @bullet @item Not defined. AutoOpts will behave as described above. @item Defined, but set to the empty string. Text will be emitted into the header to undefine (@code{#undef}) any conflicting preprocessor macros. The code will include compiler warnings (via @code{#warning}). Some compilers are not ANSI-C-99 compliant yet and will error out on those warnings. You may compile with @code{-DNO_OPTION_NAME_WARNINGS} to silence or mostly silence them. @item Defined and set to the string, ``@code{no-warning}''. All of the needed @code{#undef}s will be emitted, without any conflict checking @code{#warning} directives emitted. @item Defined and set to the string, ``@code{full-enum}''. The option manipulation preprocessor macros will not token paste the option names to the index enumeration prefix. e.g. you will need to use @code{HAVE_OPT(INDEX_OPT_DEBUG)} instead of @code{HAVE_OPT(DEBUG)}. @end itemize @item include @vindex include This string is inserted into the .c file. Generally used for global variables required only by @code{flag-code} program text. @item no-libopts @vindex no-libopts If you are going to handle your option processing with the @code{getopt.tpl} template instead of using libopts, then specify this attribute. It will suppress mention of @code{--more-help} in the generated documentation. (@code{getopt_long} does not support @code{--more-help}.) @item prefix @vindex prefix This value is inserted into @strong{all} global names. This will disambiguate them if more than one set of options are to be compiled into a single program. @end table @c @c = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = @c @node presentation attributes @subsubsection User Presentation Attributes Attributes that affect the user's experience. @table @samp @item allow-errors @vindex allow-errors The presence of this attribute indicates ignoring any command line option errors. This may also be turned on and off by invoking the macros @code{ERRSKIP_OPTERR} and @code{ERRSTOP_OPTERR} from the generated interface file. @item long-opts @vindex long-opts @cindex named option mode Presence indicates GNU-standard long option processing. Partial name matches are accepted, if they are at least two characters long and the partial match is unique. The matching is not case sensitive, and the underscore, hyphen and carat characters are all equivalent (they match). If any options do not have an option value (flag character) specified, and least one does specify such a value, then you must specify @code{long-opts}. If none of your options specify an option value (flag character) and you do not specify @code{long-opts}, then command line arguments are processed in "named option mode". This means that: @itemize @bullet @item Every command line argument must be a long option. @item The flag markers @code{-} and @code{--} are completely optional. @item The @code{argument} program attribute is disallowed. @item One of the options may be specified as the default (as long as it has a required option argument). @end itemize @item no-xlate @vindex no-xlate Modifies when or whether option names get translated. If provided, it must be assigned one of these values: @table @samp @item opt-cfg to suppress option name translation for configuration file and and environment variable processing. @item opt to suppress option name translation completely. The usage text will always be translated if @code{ENABLE_NLS} is defined and you have translations for that text. @item anything Specifies disabling all internationalization support for option code, completely. @end table See also the various @code{XLAT} interface entries in the AutoOpts Programmatic Interface section (@pxref{AutoOpts API}). @item reorder-args @vindex reorder-args Normally, POSIX compliant commands do not allow for options to be interleaved with operands. If this is necessary for historical reasons, there are two approaches available: @itemize @bullet @item Allow @code{optionProcess} to return the index of the operand like it normally does and process the operand(s). When an operand is encountered that starts with a hyphen, then set the AutoOpts current index with the @code{RESTART_OPT} macro (see @pxref{RESTART_OPT}), and re-invoke @code{optionProcess}. This will also allow you to process the operands in context. @item Specify this attribute. AutoOpts will re-order the command arguments so that the operands appear (in the original order) at the end of the argument list. Differing configuration state is not possible to detect after all options have been processed. @end itemize @item resettable @vindex resettable Specifies that the @code{--reset-option} command line option is to be supported. This makes it possible to suppress any setting that might be found in a configuration file or environment variable. @end table @node library attributes @subsection Options for Library Code @cindex library attributes Some libraries provide their own code for processing command line options, and this may be used by programs that utilize AutoOpts. You may also wish to write a library that gets configured with AutoOpts options and config files. Such a library may either supply its own configury routine and process its own options, or it may export its option descriptions to programs that also use AutoOpts. This section will describe how to do all of these different things. @menu * lib and program:: AutoOpt-ed Library for AutoOpt-ed Program * lib called:: AutoOpt-ed Library for Regular Program * prog calls lib:: AutoOpt-ed Program Calls Regular Library @end menu @node lib and program @subsubsection AutoOpt-ed Library for AutoOpt-ed Program The library source code must provide an option definition file that consists of only the attribute @code{library} @vindex library and @code{flag} entries. The ``library'' attribute does not need any associated value, so it will generally appeary by itself on a line folowed by a semi-colon. The first @code{flag} entry must contain the following attributes: @table @samp @item name This name is used in the construction of a global pointer of type @code{tOptDesc const*}. It is always required. @item documentation @vindex documentation It tells @code{AutoOpts} that this option serves no normal purpose. It will be used to add usage clarity and to locate option descriptors in the library code. @item descrip This is a string that is inserted in the extended usage display before the options specific to the current library. It is always required. @item lib-name @vindex lib-name This should match the name of the library. This string is also used in the construction of the option descriptor pointer name. In the end, it looks like this: @example extern tOptDesc const* <>_<>_optDesc_p; @end example @noindent and is used in the macros generated for the library's @code{.h} file. @end table In order to compile this @code{AutoOpts} using library, you must create a special header that is not used by the client program. This is accomplished by creating an option definition file that contains essentially exactly the following: @example AutoGen definitions options; prog-name = does-not-matter; // but is always required prog-title = 'also does not matter'; // also required config-header = 'config.h'; // optional, but common library; #include library-options-only.def @end example @noindent and nothing else. AutoGen will produce only the @code{.h} file. You may now compile your library, referencing just this @code{.h} file. The macros it creates will utilize a global variable that will be defined by the @code{AutoOpts}-using client program. That program will need to have the following @code{#include} in @i{its} option definition file: @example #include library-options-only.def @end example @noindent All the right things will magically happen so that the global variables named @code{<>_<>_optDesc_p} are initialized correctly. For an example, please see the @code{AutoOpts} test script: @file{autoopts/test/library.test}. @node lib called @subsubsection AutoOpt-ed Library for Regular Program In this case, your library must provide an option processing function to a calling program. This is accomplished by setting the @code{allow-errors} global option attribute. Each time your option handling function is called, you must determine where your scan is to resume and tell the AutoOpts library by invoking: @example RESTART_OPT(next_arg_index); @end example @noindent and then invoke @code{not_opt_index = optionProcess(...)}. The @code{not_opt_index} value can be used to set @code{optind}, if that is the global being used to scan the program argument array. In this method, do @strong{NOT} utilize the global @code{library} attribute. Your library must specify its options as if it were a complete program. You may choose to specify an alternate @code{usage()} function so that usage for other parts of the option interface may be displayed as well. See ``Program Information Attributes'' (@pxref{information attributes}). At the moment, there is no method for calling @code{optionUsage()} telling it to produce just the information about the options and not the program as a whole. Some later revision after somebody asks. @node prog calls lib @subsubsection AutoOpt-ed Program Calls Regular Library As with providing an @code{AutoOpt}-ed library to a non-@code{AutoOpt}-ed program, you must write the option description file as if you were writing all the options for the program, but you should specify the @code{allow-errors} global option attribute and you will likely want an alternate @code{usage()} function (see ``Program Information Attributes'' @pxref{information attributes}). In this case, though, when @code{optionProcess()} returns, you need to test to see if there might be library options. If there might be, then call the library's exported routine for handling command line options, set the next-option-to-process with the @code{RESTART_OPT()} macro, and recall @code{optionProcess()}. Repeat until done. @node information attributes @subsection Program Information Attributes @cindex information attributes These attributes are used to define how and what information is displayed to the user of the program. @table @samp @item copyright @vindex copyright The @code{copyright} is a structured value containing three to five values. If @code{copyright} is used, then the first three are required. @enumerate @item @vindex date @file{date} - the list of applicable dates for the copyright. @item @vindex owner @file{owner} - the name of the copyright holder. @item @vindex type @file{type} - specifies the type of distribution license. AutoOpts/AutoGen supports the text of the GNU Public License (@file{gpl}), the GNU ``Lesser'' General Public License with Library extensions (@file{lgpl}), the Modified Free BSD license (@file{mbsd}) and a few others. Other licenses may be specified, but you must provide your own license file. The list of license files provided by AutoOpts may be seen by typing: @example ls $(autoopts-config pkgdatadir)/*.lic @end example @item @vindex text @file{text} - the text of the copyright notice. This must be provided if @file{type} is set to @file{NOTE}. @item @vindex author @file{author} - in case the author name is to appear in the documentation and is different from the copyright owner. @item @vindex eaddr @file{eaddr} - email address for receiving praises and complaints. Typically that of the author or copyright holder. @end enumerate @* An example of this might be: @example copyright = @{ date = "1992-2012"; owner = "Bruce Korb"; eaddr = 'bkorb@@gnu.org'; type = GPL; @}; @end example @item detail @vindex detail This string is added to the usage output when the HELP option is selected. @item explain @vindex explain Gives additional information whenever the usage routine is invoked. @item package @vindex package The name of the package the program belongs to. This will appear parenthetically after the program name in the version and usage output, e.g.: @code{autogen @i{(GNU autogen)} - The Automated Program Generator}. @item preserve-case @vindex preserve-case This attribute will not change anything except appearance. Normally, the option names are all documented in lower case. However, if you specify this attribute, then they will display in the case used in their specification. Command line options will still be matched without case sensitivity. This is useful for specifying option names in camel-case. @item prog-desc @strong{and} @itemx opts-ptr @vindex prog-desc @vindex opts-ptr These define global pointer variables that point to the program descriptor and the first option descriptor for a library option. This is intended for use by certain libraries that need command line and/or initialization file option processing. These definitions have no effect on the option template output, but are used for creating a library interface file. Normally, the first "option" for a library will be a documentation option that cannot be specified on the command line, but is marked as @code{settable}. The library client program will invoke the @code{SET_OPTION} macro which will invoke a handler function that will finally set these global variables. @item usage @vindex usage Optionally names the usage procedure, if the library routine @code{optionUsage()} does not work for you. If you specify @code{my_usage} as the value of this attribute, for example, you will use a procedure by that name for displaying usage. Of course, you will need to provide that procedure and it must conform to this profile: @example void @i{my_usage}( tOptions* pOptions, int exitCode ) @end example @item gnu-usage @vindex gnu-usage Normally, the default format produced by the @code{optionUsage} procedure is @i{AutoOpts Standard}. By specifying this attribute, the default format will be @i{GNU-ish style}. Either default may be overridden by the user with the @code{AUTOOPTS_USAGE} environment variable. If it is set to @code{gnu} or @code{autoopts}, it will alter the style appropriately. This attribute will conflict with the @code{usage} attribute. @item reorder-args @vindex reorder-args Some applications traditionally require that the command operands be intermixed with the command options. In order to handle that, the arguments must be reordered. If you are writing such an application, specify this global option. All of the options (and any associated option arguments) will be brought to the beginning of the argument list. New applications should not use this feature, if at all possible. This feature is @i{disabled} if @code{POSIXLY_CORRECT} is defined in the environment. @end table @node Generated main @subsection Generating main procedures @cindex main procedure When AutoOpts generates the code to parse the command line options, it has the ability to produce any of several types of @code{main()} procedures. This is done by specifying a global structured value for @vindex main @code{main}. The values that it contains are dependent on the value set for the one value it must have: @code{main-type}. @vindex main-type The recognized values for @code{main-type} are: @menu * main guile:: guile: main and inner_main procedures * main shell-process:: shell-process: emit Bourne shell results * main shell-parser:: shell-parser: emit Bourne shell script * main main:: main: user supplied main procedure * main include:: include: code emitted from included template * main invoke:: invoke: code emitted from AutoGen macro * main for-each:: for-each: perform function on each argument @end menu Here is an example of an @code{include} variation: @example main = @{ main-type = include; tpl = "main-template.tpl"; @}; @end example @node main guile @subsubsection guile: main and inner_main procedures When the @code{main-type} is specified to be @code{guile}, a @code{main()} procedure is generated that calls @code{gh_enter()}, providing it with a generated @code{inner_main()} to invoke. If you must perform certain tasks before calling @code{gh_enter()}, you may specify such code in the value for the @vindex before-guile-boot @code{before-guile-boot} attribute. The @code{inner_main()} procedure itself will process the command line arguments (by calling @code{optionProcess()}, @pxref{libopts-optionProcess}), and then either invoke the code specified with the @vindex guile-main @code{guile-main} attribute, or else export the parsed options to Guile symbols and invoke the @code{scm_shell()} function from the Guile library. This latter will render the program nearly identical to the stock @code{guile(1)} program. @node main shell-process @subsubsection shell-process: emit Bourne shell results This will produce a @code{main()} procedure that parses the command line options and emits to @file{stdout} Bourne shell commands that puts the option state into environment variables. This can be used within a shell script as follows: @example unset OPTION_CT eval "`opt_parser \"$@@\"`" test -z "$@{OPTION_CT@}" && exit 1 test $@{OPTION_CT@} -gt 0 && shift $@{OPTION_CT@} @end example If the option parsing code detects an error or a request for usage, it will not emit an assignment to OPTION_CT and the script should just exit. If the options are set consistently, then something along the lines of the following will be written to @file{stdout} and evaled: @example OPTION_CT=4 export OPTION_CT MYPROG_SECOND='first' export MYPROG_SECOND MYPROG_ANOTHER=1 # 0x1 export MYPROG_ANOTHER @end example @noindent If the arguments are to be reordered, however, then the resulting set of operands will be emitted and @code{OPTION_CT} gets set to zero. For example, the following would be appended to the above: @example set -- 'operand1' 'operand2' 'operand3' OPTION_CT=0 @end example @noindent @code{OPTION_CT} is set to zero since it is not necessary to shift off any options. @node main shell-parser @subsubsection shell-parser: emit Bourne shell script This will produce a @code{main()} procedure that emits a shell script that will parse the command line options. That script can be emitted to @file{stdout} or inserted or substituted into a pre-existing shell script file. Improbable markers are used to identify previously inserted parsing text: @example # # # # # # # # # # -- do not modify this marker -- @end example @noindent The program is also pretty insistent upon starting its parsing script on the second line. @node main main @subsubsection main: user supplied main procedure You must supply a value for the @code{main-text} attribute. You may also supply a value for @vindex option-code @code{option-code}. If you do, then the @code{optionProcess} invocation will not be emitted into the code. AutoOpts will wrap the @code{main-text} inside of: @example int main( int argc, char** argv ) @{ @{ // replaced by option-code, if that exists int ct = optionProcess( &<>Options, argc, argv ); argc -= ct; argv += ct; @} <> @} @end example @noindent so you can most conveniently set the value with a ``@code{here string}'' (@pxref{here-string}): @example code = <<- _EndOfMainProc_ <> _EndOfMainProc_; @end example @node main include @subsubsection include: code emitted from included template You must write a template to produce your main procedure. You specify the name of the template with the @code{tpl} attribute and it will be incorporated at the point where AutoOpts is ready to emit the @code{main()} procedure. This can be very useful if, in your working environment, you have many programs with highly similar @code{main()} procedures. All you need to do is parameterize the variations and specify which variant is needed within the @code{main} AutoOpts specification. Since you are coding the template for this, the attributes needed for this variation would be dictated by your template. @node main invoke @subsubsection invoke: code emitted from AutoGen macro You must write a template to produce your main procedure. That template must contain a definition for the function specified with the @code{func} attribute to this @code{main()} procedure specification. Typically, this template will be incorporated by using the @code{--lib-template} option (@pxref{autogen lib-template}) in the AutoGen invocation. Otherwise, this variation operates in much the same way as ``@code{include}'' (@pxref{main include}) method. @node main for-each @subsubsection for-each: perform function on each argument This produces a main procedure that invokes a procedure once for each operand on the command line (non-option arguments), @strong{OR} once for each non-blank, non-comment @code{stdin} input line. Leading and trailing white space is trimmed from the input line and comment lines are lines that are empty or begin with a comment character, defaulting to a hash ('#') character. @strong{NB}: The @code{argument} program attribute (@pxref{program attributes}) must begin with the @code{[} character, to indicate that there are command operands, but that they are optional. There are a number of attributes to @code{main} that may be used: @table @code @item handler-proc @vindex handler-proc This attribute is required. It is used to name the procedure to call. That procedure is presumed to be external, but if you provide the code for it, then the procedure is emitted as a static procedure in the generated code. This procedure should return 0 on success, a cumulative error code on warning and exit without returning on an unrecoverable error. As the cumulative warning codes are @i{or}-ed together, the codes should be some sort of bit mask in order to be ultimately decipherable (if you need to do that). If the called procedure needs to cause a fail-exit, it is expected to call @code{exit(3)} directly. If you want to cause a warning exit code, then this handler function should return a non-zero status. That value will be @strong{OR}-ed into a result integer for computing the final exit code. E.g., here is part of the emitted code: @example int res = 0; if (argc > 0) @{ do @{ res |= @i{my_handler}( *(argv++) ); @} while (--argc > 0); @} else @{ ... @end example @item handler-type @vindex handler-type If you do not supply this attribute, your handler procedure must be the default type. The profile of the procedure must be: @example int @i{my_handler}( char const *pz_entry ); @end example @noindent However, if you do supply this attribute, you may set the value to any of four alternate flavors: @table @samp @item name-of-file This is essentially the same as the default handler type, except that before your procedure is invoked, the generated code has verified that the string names an existing file. The profile is unchanged. @item file-X Before calling your procedure, the file is f-opened according to the ``X'', where ``X'' may be any of the legal modes for @code{fopen(3C)}. In this case, the profile for your procedure must be: @example int @i{my_handler}( char const* pz_fname, FILE* entry_fp ); @end example @item text-of-file @itemx some-text-of-file Before calling your procedure, the contents of the file are read or mapped into memory. (Excessively large files may cause problems.) The @samp{some-text-of-file} disallows empty files. Both require regular files. In this case, the profile for your procedure must be: @example program_exit_code_t @i{my_handler}(char const* pz_fname, char* file_text, size_t text_size); @end example @noindent Note that though the @code{file_text} is not @code{const}, any changes made to it are not written back to the original file. It is merely a memory image of the file contents. Also, the memory allocated to hold the text is @code{text_size + 1} bytes long and the final byte is always @code{NUL}. The file contents need not be text, as the data are read with the @code{read(2)} system call. @end table If you select one of these file type handlers, then on access or usage errors the @code{PROGRAM_EXIT_FAILURE} exit code will, by default, be or-ed into the final exit code. This can be changed by specifying the global @code{file-fail-code} attribute and naming a different value. That is, something other than @code{failure}. You may choose @code{success}, in which case file access issues will not affect the exit code and the error message will not be printed. @item @i{my_handler}-code @vindex MYHANDLER-code With this attribute, you provide the code for your handler procedure in the option definition file. In this case, your @code{main()} procedure specification might look something like this: @example main = @{ main-type = for-each; handler-proc = @i{my_handler}; @i{my_handler}-code = <<- EndOfMyCode /* whatever you want to do */ EndOfMyCode; @}; @end example @noindent and instead of an emitted external reference, a procedure will be emitted that looks like this: @example static int @i{my_handler}( char const* pz_entry ) @{ int res = 0; <<@i{my_handler}-code goes here>> return res; @} @end example @item main-init @vindex main-init This is code that gets inserted after the options have been processed, but before the handler procs get invoked. @item main-fini @vindex main-fini This is code that gets inserted after all the entries have been processed, just before returning from @code{main()}. @item comment-char @vindex comment-char If you wish comment lines to start with a character other than a hash (@code{#}) character, then specify one character with this attribute. If that character is the @code{NUL} byte, then only blank lines will be considered comments. @end table @node option attributes @subsection Option Attributes @cindex option attributes For each option you wish to specify, you must have a block macro named @code{flag} defined. There are two required attributes: @code{name} and @code{descrip}. If any options do not have a @code{value} (traditional flag character) attribute, then the @code{long-opts} program attribute must also be defined. As a special exception, if no options have a @code{value} @strong{and} @code{long-opts} is not defined @strong{and} @code{argument} is not defined, then all arguments to the program are named options. In this case, the @code{-} and @code{--} command line option markers are optional. @menu * Required Attributes:: Required Attributes * Common Attributes:: Common Option Attributes * Immediate Action:: Immediate Action Attributes * Option Conflict Attributes:: Option Conflict Attributes These option attributes do not fit well with the above categories. * opt-attr settable:: Program may set option * opt-attr no-preset:: Option cannot be pre-configured * opt-attr equivalence:: Option Equivalence Class * opt-attr aliases:: Option Aliasing * opt-attr default option:: Default Option * opt-attr documentation:: Option Sectioning Comment * opt-attr translators:: Translator Notes @end menu @node Required Attributes @subsubsection Required Attributes @cindex Required Attributes Every option must have exactly one copy of both of these attributes. @table @samp @item name @vindex name Long name for the option. Even if you are not accepting long options and are only accepting flags, it must be provided. AutoOpts generates private, named storage that requires this name. This name also causes a @code{#define}-d name to be emitted. It must not conflict with any other names you may be using in your program. For example, if your option name is, @code{debug} or @code{munged-up}, you must not use the @code{#define} names @code{DEBUG} (or @code{MUNGED_UP}) in your program for non-AutoOpts related purposes. They are now used by AutoOpts. Sometimes (most especially under Windows), you may get a surprise. For example, @code{INTERFACE} is apparently a user space name that one should be free to use. Windows usurps this name. To solve this, you must do one of the following: @enumerate @item Change the name of your option @item add the program attribute (@pxref{program attributes}): @example export = '#undef INTERFACE'; @end example @item add the program attribute: @example guard-option-names; @end example @end enumerate @item descrip @vindex descrip Except for documentation options, a @strong{very} brief description of the option. About 40 characters on one line, maximum, not counting any texinfo markups. Texinfo markups are stripped before printing in the usage text. It appears on the @code{usage()} output next to the option name. If, however, the option is a documentation option, it will appear on one or more lines by itself. It is thus used to visually separate and comment upon groups of options in the usage text. @end table @node Common Attributes @subsubsection Common Option Attributes @cindex Common Option Attributes These option attributes are optional. Any that do appear in the definition of a flag, may appear only once. @table @samp @item value @vindex value The flag character to specify for traditional option flags, e.g., @code{-L}. @item max @vindex max Maximum occurrence count (invalid if @var{disable} present). The default maximum is 1. @code{NOLIMIT} can be used for the value, otherwise it must be a number or a @code{#define} that evaluates to a number. @item min @vindex min Minimum occurrence count. If present, then the option @strong{must} appear on the command line. Do not define it with the value zero (0). @item must-set @vindex must-set If an option must be specified, but it need not be specified on the command line, then specify this attribute for the option. @item deprecated @vindex deprecated There are two effects to this attribute: the usage text will not show the option, and the generated documentation will mark it with: ``@emph{NOTE: THIS OPTION IS DEPRECATED}''. @item disable @vindex disable Prefix for disabling (inverting sense of) the option. Only useful if long option names are being processed. When an option has this attribute, the test @code{ENABLED_OPT(OPTNAME)} is false when either of the following is true: @itemize @bullet @item The option has not been specified and the @code{enable} attribute has not been specified. @item The option has been specified with this disabling prefix. @end itemize To detect that the option has been specified with the disabling prefix, you must use: @example HAVE_OPT(OPTNAME) && ! ENABLED_OPT(OPTNAME) @end example @item enable @vindex enable Long-name prefix for enabling the option (invalid if @var{disable} @strong{not} present). Only useful if long option names are being processed. @item enabled @vindex enabled If default is for option being enabled. (Otherwise, the OPTST_DISABLED bit is set at compile time.) Only useful if the option can be disabled. @item ifdef @itemx ifndef @itemx omitted-usage @vindex ifdef @vindex ifndef @vindex omitted-usage If an option is relevant on certain platforms or when certain features are enabled or disabled, you can specify the compile time flag used to indicate when the option should be compiled in or out. For example, if you have a configurable feature, @code{mumble} that is indicated with the compile time define, @code{WITH_MUMBLING}, then add: @example ifdef = WITH_MUMBLING; @end example @noindent Take care when using these. There are several caveats: @itemize @bullet @item The case and spelling must match whatever is specified. @item Do not confuse these attributes with the AutoGen directives of the same names, @xref{Directives}. These cause C preprocessing directives to be inserted into the generated C text. @item Only one of @code{ifdef} and @code{ifndef} may apply to any one option. @item The @code{VALUE_OPT_} values are @code{#define}-d. If @code{WITH_MUMBLING} is not defined, then the associated @code{VALUE_OPT_} value will not be @code{#define}-d either. So, if you have an option named, @code{MUMBLING} that is active only if @code{WITH_MUMBLING} is @code{#define}-d, then @code{VALUE_OPT_MUMBLING} will be @code{#define}-d iff @code{WITH_MUMBLING} is @code{#define}-d. Watch those switch statements. @item If you specify @code{omitted-usage}, then the option will be recognized as disabled when it is configured out of the build, but will yield the message, ``This option has been disabled.'' You may specify an alternate message by giving @code{omitted-usage} a string value. e.g.: @example omitted-usage = 'you cannot do this'; @end example @end itemize @item no-command @vindex no-command This option specifies that the option is not allowed on the command line. Such an option may not take a @code{value} (flag character) attribute. The program must have the @code{homerc} (@pxref{program attributes}) option set. @end table @node Immediate Action @subsubsection Immediate Action Attributes @cindex immediate action Certain options may need to be processed early. For example, in order to suppress the processing of configuration files, it is necessary to process the command line option @code{--no-load-opts} @strong{before} the config files are processed. To accommodate this, certain options may have their enabled or disabled forms marked for immediate processing. The consequence of this is that they are processed ahead of all other options in the reverse of normal order. Normally, the first options processed are the options specified in the first @code{homerc} file, followed by then next @code{homerc} file through to the end of config file processing. Next, environment variables are processed and finally, the command line options. The later options override settings processed earlier. That actually gives them higher priority. Command line immediate action options actually have the lowest priority of all. They would be used only if they are to have an effect on the processing of subsequent options. @table @samp @item immediate @vindex immediate Use this option attribute to specify that the enabled form of the option is to be processed immediately. The @code{help} and @code{more-help} options are so specified. They will also call @code{exit()} upon completion, so they @strong{do} have an effect on the processing of the remaining options :-). @item immed-disable @vindex immed-disable Use this option attribute to specify that the disabled form of the option is to be processed immediately. The @code{load-opts} option is so specified. The @code{--no-load-opts} command line option will suppress the processing of config files and environment variables. Contrariwise, the @code{--load-opts} command line option is processed normally. That means that the options specified in that file will be processed after all the @code{homerc} files and, in fact, after options that precede it on the command line. @item also If either the @code{immediate} or the @code{immed-disable} attributes are set to the string, ``@code{also}'', then the option will actually be processed twice: first at the immediate processing phase and again at the ``normal'' time. @end table @node Option Conflict Attributes @subsubsection Option Conflict Attributes @cindex Option Conflict Attributes These attributes may be used as many times as you need. They are used at the end of the option processing to verify that the context within which each option is found does not conflict with the presence or absence of other options. This is not a complete cover of all possible conflicts and requirements, but it simple to implement and covers the more common situations. @table @samp @cindex flags-must @item flags-must one entry for every option that @strong{must} be present when this option is present @cindex flags-cant @item flags-cant one entry for every option that @strong{cannot} be present when this option is present @end table @node opt-attr settable @subsubsection Program may set option @vindex settable If the option can be set outside of option processing, specify ``@code{settable}''. If this attribute is defined, special macros for setting this particular option will be inserted into the interface file. For example, @code{TEMPL_DIRS} is a settable option for AutoGen, so a macro named @code{SET_OPT_TEMPL_DIRS(a)} appears in the interface file. This attribute interacts with the @var{documentation} attribute. @node opt-attr no-preset @subsubsection Option cannot be pre-configured @vindex no-preset @cindex configuration file If presetting this option is not allowed, specify ``@code{no-preset}''. (Thus, environment variables and values set in configuration files will be ignored.) @node opt-attr equivalence @subsubsection Option Equivalence Class @vindex equivalence Generally, when several options are mutually exclusive and basically serve the purpose of selecting one of several processing modes, specify the ``@code{equivalence}'' attribute. These options will be considered an equivalence class. Sometimes, it is just easier to deal with them as such. All members of the equivalence class must contain the same equivalenced-to option, including the equivalenced-to option itself. Thus, it must be a class member. For an option equivalence class, there is a single occurrence counter for the class. It can be referenced with the interface macro, @code{COUNT_OPT(BASE_OPTION)}, where ``BASE_OPTION'' is the equivalenced-to option name. Also, please take careful note: since the options are mapped to the equivalenced-to option descriptor, any option argument values are mapped to that descriptor also. Be sure you know which ``equivalent option'' was selected before getting an option argument value! During the presetting phase of option processing (@pxref{Presetting Options}), equivalenced options may be specified. However, if different equivalenced members are specified, only the last instance will be recognized and the others will be discarded. A conflict error is indicated only when multiple different members appear on the command line itself. As an example of where equivalenced options might be useful, @code{cpio(1)} has three options @code{-o}, @code{-i}, and @code{-p} that define the operational mode of the program (@code{create}, @code{extract} and @code{pass-through}, respectively). They form an equivalence class from which one and only one member must appear on the command line. If @code{cpio} were an AutoOpt-ed program, then each of these option definitions would contain: @example equivalence = create; @end example and the program would be able to determine the operating mode with code that worked something like this: @example switch (WHICH_IDX_CREATE) @{ case INDEX_OPT_CREATE: ... case INDEX_OPT_EXTRACT: ... case INDEX_OPT_PASS_THROUGH: ... default: /* cannot happen */ @} @end example @node opt-attr aliases @subsubsection Option Aliasing Sometimes, for backwards compatibility or tradition or just plain convenience, it works better to define one option as a pure alias for another option. For such situations, provide the following pieces of information: @example flag = @{ name = @i{aliasing-option-name}; value = @i{aliasing-flag-char}; // optional ! aliases = @i{aliased-to-option}; @}; @end example Do not provide anything else. The usage text for such an option will be: @example This is an alias for @i{aliased-to-option} @end example @node opt-attr default option @subsubsection Default Option @vindex default If your program processes its arguments in named option mode (See @code{long-opts} in @ref{program attributes}), then you may select @strong{one} of your options to be the default option. Do so by using attribute @code{default} with one of the options. The option so specified must have an @code{arg-type} (@pxref{Option Arguments}) specified, but not the @code{arg-optional} (@pxref{arg-optional}) attribute. That is to say, the option argument must be required. If you have done this, then any arguments that do not match an option name and do not contain an equal sign (@code{=}) will be interpreted as an option argument to the default option. @node opt-attr documentation @subsubsection Option Sectioning Comment This attribute means the option exists for the purpose of separating option description text in the usage output and texi documentation. Without this attribute, every option is a separate node in the texi docs. With this attribute, the documentation options become texi doc nodes and the options are collected under them. Choose the name attribute carefully because it will appear in the texi documentation. Libraries may also choose to make it settable so that the library can determine which command line option is the first one that pertains to the library. @vindex documentation If the @samp{documentation} attribute is present, then all other attributes are disabled except @code{settable}, @code{call-proc} and @code{flag-code}. @code{settable} must be and is only specified if @code{call-proc}, @code{extract-code} or @code{flag-code} has been specified. When present, the @code{descrip} attribute will be displayed only when the @code{--help} option has been specified. It will be displayed flush to the left hand margin and may consist of one or more lines of text, filled to 72 columns. The name of the option will not be printed in the help text. It @i{will}, however, be printed as section headers in the texi documentation. If the attribute is given a non-empty value, this text will be reproduced in the man page and texi doc immediately after the @code{descrip} text. @node opt-attr translators @subsubsection Translator Notes @vindex translators If you need to give the translators a special note about a particular option, please use the ``@code{translators}'' attribute. The attribute text will be emitted into the generated @code{.c} text where the option related strings get defined. To make a general comment about all of the option code, add comments to an @code{include} attribute (@pxref{program attributes}). Do @strong{not} use this attribute globally, or it will get emitted into every option definition block. @node Option Arguments @subsection Option Argument Specification @cindex Option Arguments Command line options come in three flavors: options that do not take arguments, those that do and those that may. Without an "arg-type" attribute, AutoOpts will not process an argument to an option. If "arg-type" is specified and "arg-optional" is also specified, then the next command line token will be taken to be an argument, unless it looks like the name of another option. If the argument type is specified to be anything other than "str[ing]", then AutoOpts will specify a callback procedure to handle the argument. Some of these procedures will be created and inserted into the generated @code{.c} file, and others are already built into the @file{libopts} library. Therefore, if you write your own callback procedure (@pxref{Option Argument Handling}), then you must either not specify an "arg-type" attribute, or else specify it to be of type "str[ing]". Your callback function will be able to place its own restrictions on what that string may contain or represent. Option argument handling attributes depend upon the value set for the @vindex arg-type @code{arg-type} attribute. It specifies the type of argument the option will take. If not present, the option cannot take an argument. If present, it must be an entry in the following table. The first three letters is sufficient. @menu * arg-type string:: Arg Type String * arg-type number:: Arg Type Number * arg-type boolean:: Arg Type Boolean * arg-type keyword:: Arg Type Keyword * arg-type set membership:: Arg Type Set Membership * arg-type hierarchy:: Arg Type Hierarchical * arg-type file name:: Arg Type File Name * arg-type time-duration:: Arg Type Time Duration * arg-type time-date:: Arg Type Time and Date Supporting attributes for particular argument types: * arg-keyword:: Keyword list * arg-optional:: Option Argument Optional * arg-default:: Default Option Argument Value @end menu @node arg-type string @subsubsection Arg Type String @code{arg-type = string;} The argument may be any arbitrary string, though your program or option callback procedure may place additional constraints upon it. @node arg-type number @subsubsection Arg Type Number @code{arg-type = number;} The argument must be a correctly formed integer, without any trailing U's or L's. AutoOpts contains a library procedure to convert the string to a number. If you specify range checking with @code{arg-range} (see below), then AutoOpts produces a special purpose procedure for this option. @table @samp @item scaled @vindex scaled @code{scaled} marks the option so that suffixes of @samp{k}, @samp{K}, @samp{m}, @samp{M}, @samp{g}, @samp{G}, @samp{t}, and @samp{T} will multiply the given number by a power of 1000 or 1024. Lower case letters scale by a power of 1000 and upper case scale by a power of 1024. @item arg-range @vindex arg-range @code{arg-range} is used to create a callback procedure for validating the range of the option argument. It must match one of the range entries. Each @code{arg-range} should consist of either an integer by itself or an integer range. The integer range is specified by one or two integers separated by the two character sequence, @code{->}. Be sure to quote the entire range string. The definitions parser will not accept the range syntax as a single string token. The generated procedure imposes the range constraints as follows: @itemize @bullet @item A number by itself will match that one value. @item The high end of the range may not be @code{INT_MIN}, both for obvious reasons and because that value is used to indicate a single-valued match. @item An omitted lower value implies a lower bound of INT_MIN. @item An omitted upper value implies a upper bound of INT_MAX. @item The argument value is required. It may not be optional. @item The value must match one of the entries. If it can match more than one, then you have redundancies, but no harm will come of it. @end itemize @end table @node arg-type boolean @subsubsection Arg Type Boolean @code{arg-type = boolean;} The argument will be interpreted and always yield either AG_TRUE or AG_FALSE. False values are@: the empty string, the number zero, or a string that starts with @code{f}, @code{F}, @code{n} or @code{N} (representing False or No). Anything else will be interpreted as True. @node arg-type keyword @subsubsection Arg Type Keyword @code{arg-type = keyword;} The argument must match a specified list of strings (@pxref{arg-keyword}). Assuming you have named the option, @code{optn-name}, the strings will be converted into an enumeration of type @code{te_Optn_Name} with the values @code{OPTN_NAME_KEYWORD}.* If you have @strong{not} specified a default value, the value @code{OPTN_NAME_UNDEFINED} will be inserted with the value zero. The option will be initialized to that value. You may now use this in your code as follows: @example te_Optn_Name opt = OPT_VALUE_OPTN_NAME; switch (opt) @{ case OPTN_NAME_UNDEFINED: /* undefined things */ break; case OPTN_NAME_KEYWORD: /* `keyword' things */ break; default: /* utterly impossible */ ; @} @end example AutoOpts produces a special purpose procedure for this option. You may not specify an alternate handling procedure. If you have need for the string name of the selected keyword, you may obtain this with the macro, @code{OPT_OPTN_NAME_VAL2STR(val)}. The value you pass would normally be @code{OPT_VALUE_OPTN_NAME}, but anything with numeric value that is legal for @code{te_Optn_Name} may be passed. Anything out of range will result in the string, @code{"*INVALID*"} being returned. The strings are read only. It may be used as in: @example te_Optn_Name opt = OPT_VALUE_OPTN_NAME; printf( "you selected the %s keyword\n", OPT_OPTN_NAME_VAL2STR(opt) ); @end example * Note: you may replace the @code{OPTN_NAME} enumeration prefix with another prefix by specifying a @vindex prefix-enum @code{prefix-enum} attribute. Finally, users may specify the argument either by name or by number. Since the numeric equivalents change by having new entries inserted into the keyword list, this would not be a recommended practice. However, either @code{-1} or @code{~0} will always be equivalent to specifying the last keyword. @node arg-type set membership @subsubsection Arg Type Set Membership @code{arg-type = set;} The argument must be a list of names each of which must match the strings "@code{all}", "@code{none}" or one of the keywords (@pxref{arg-keyword}) specified for this option. @code{all} will turn on all membership bits and @code{none} will turn them all off. Specifying one of the keywords will turn on the corresponding set membership bit. Literal numbers may also be used and may, thereby, set or clear more than one bit. Preceding a keyword or literal number with a bang (@code{!} - exclamation point) will turn the bit(s) off. The number of keywords allowed is constrained by the number of bits in a pointer, as the bit set is kept in a @code{void*}. If, for example, you specified @code{first} in your list of keywords, then you can use the following code to test to see if either @code{first} or @code{all} was specified: @example uintptr_t opt = OPT_VALUE_OPTN_NAME; if (opt & OPTN_NAME_FIRST) /* OPTN_NAME_FIRST bit was set */ ; @end example AutoOpts produces a special purpose procedure for this option. To set multiple bits as the default (initial) value, you must specify an initial numeric value (which might become inaccurate over time), or else specify @code{arg-default} multiple times. Do not specify a series of names conjoined with @code{+} symbols as the value for any of the @code{arg-default} attributes. That works for option parsing, but not for the option code generation. @node arg-type hierarchy @subsubsection Arg Type Hierarchical @code{arg-type = hierarchy;} @* @code{arg-type = nested;} This denotes an option with a structure-valued argument, a.k.a. ``subopts'' in @code{getopts} terminology. The argument is parsed and the values made available to the program via the find and find next calls (@xref{libopts-optionFindValue}, @xref{libopts-optionGetValue}, and @pxref{libopts-optionFindNextValue}). @example tOptionValue * val = optionGetValue(VALUE_OPT_OPTN_NAME, "name"); while (val != NULL) @{ process(val); val = optionNextValue(VALUE_OPT_OPTN_NAME, val); if (wrong_name(val, "name")) break; @} @end example @node arg-type file name @subsubsection Arg Type File Name @code{arg-type = file;} This argument type will have some validations on the argument and, optionally, actually open the file. You must specify several additonal attributes for the option: @table @samp @item file-exists @vindex file-exists If not specified or empty, then the directory portion of the name is checked. The directory must exist or the argument is rejected and the usage procedure is invoked. Otherwise, both the directory as above and the full name is tested for existence. If the value begins with the two letters ``no'', then the file must not pre-exist. Otherwise, the file is expected to exist. @item open-file @vindex open-file If not specified or empty, the file is left alone. If the value begins with the four letters ``desc''[@i{riptor}], then @code{open(2)} is used and @code{optArg.argFd} is set. Otherwise, the file is opened with @code{fopen} and @code{optArg.argFp} is set. @item file-mode @vindex file-mode If ``open-file'' is set and not empty, then you must specify the open mode. Set the value to the flag bits or mode string as appropriate for the open type. @end table @node arg-type time-duration @subsubsection Arg Type Time Duration @code{arg-type = time-duration;} The argument will be converted into a number of seconds. It may be a multi-part number with different parts being multiplied into a seconds value and added into the final result. Valid forms are in the table below. Upper cased letters represent numbers that must be used in the expressions. @table @samp @item [[HH:]MM:]SS @code{HH} is multiplied by @code{3600} and @code{MM} multiplied by @code{60} before they are added to @code{SS}. This time specification may not be followed by any other time specs. @code{HH} and @code{MM} are both optional, though @code{HH} cannot be specified without @code{MM}. @item DAYS d @code{DAYS} is multiplied by the number of seconds in a day. This value may be followed by (and added to) values specified by @code{HH:MM:SS} or the suffixed values below. If present, it must always be first. @item HRS h @code{HRS} is multiplied by the number of seconds in an hour. This value may be followed by (and added to) values specified by @code{MM:SS} or the suffixed values below. @item MINS m @code{MINS} is multiplied by the number of seconds in a minute. This value may be followed by (and added to) a count of seconds. @item SECS s This value can only be the last value in a time specification. The @code{s} suffix is optional. @end table @example 5 d 1:10:05 ==> 5 days + 1 hour 10 minutes and 5 seconds 5 d 1 h 10 m 5 ==> yields: 436205 seconds 5d1h10m5s ==> same result -- spaces are optional. @end example When saved into a config file, the value will be stored as a simple count of seconds. There are actually more (many) accepted time duration strings. The full documentation can be found with ISO-8601 documentation and the more extedded documentation when ``parse_duration()'' becomes more widely available. @node arg-type time-date @subsubsection Arg Type Time and Date @code{arg-type = time-date;} The argument will be converted into the number of seconds since the epoch. The conversion rules are very complicated, please see the @file{getdate_r(3GNU)} man page. There are some additional restrictions: @enumerate @item Your project must be compiled with @code{PKGDATADIR} defined and naming a valid directory. @item The @code{DATEMSK} environment variable will be set to the @file{datemsk} file within that directory. @end enumerate If that file is not accessible for any reason, the string will be parsed as a time duration (@pxref{arg-type time-duration}) instead of a specific date and time. @node arg-keyword @subsubsection Keyword list @vindex keyword If the @code{arg-type} is @code{keyword} (@pxref{arg-type keyword}) or @code{set-membership} (@pxref{arg-type set membership}), then you must specify the list of keywords by a series of @code{keyword} entries. The interface file will contain values for @code{@i{}_@i{}} for each keyword entry. @code{keyword} option types will have an enumeration and @code{set-membership} option types will have a set of unsigned bits @code{#define}-d. If the @code{arg-type} is specifically @code{keyword}, you may also add special handling code with a @vindex extra-code @code{extra-code} attribute. After @code{optionEnumerationVal} has converted the input string into an enumeration, you may insert code to process this enumeration value (@code{pOptDesc->optArg.argEnum}). @node arg-optional @subsubsection Option Argument Optional @vindex arg-optional This attribute indicates that the user does not have to supply an argument for the option. This is only valid if the @var{arg-type} is @code{string} (@pxref{arg-type string}) or @code{keyword} (@pxref{arg-type keyword}). If it is @code{keyword}, then this attribute may also specify the default keyword to assume when the argument is not supplied. If left empty, @var{arg-default} (@pxref{arg-default}) or the zero-valued keyword will be used. This is overridden and the options are required if the libopts library gets configured with @code{--disable-optional-args}. @node arg-default @subsubsection Default Option Argument Value @vindex arg-default This specifies the default option argument value to be used when the option is not specified or preset. You may specify multiple @code{arg-default} values if the argument type is @code{set membership}. @node Option Argument Handling @subsection Option Argument Handling @cindex Option Argument Handling AutoOpts will either specify or automatically generate callback procedures for options that take specialized arguments. The only option argument types that are not specialized are plain string arguments and no argument at all. For options that fall into one of those two categories, you may specify your own callback function, as specified below. If you do this and if you specify that options are resettable (@pxref{automatic options}), then your option handling code @strong{must} look for the @samp{OPTST_RESET} bit in the @code{fOptState} field of the option descriptor. If the option takes a string argument, then you may specify that the option is to be handled by the @code{libopts} library procedures @code{stackOptArg()} or @code{unstackOptArg()} (see below). In this case, you may not provide option handling code. Finally, @samp{documentation} options (@pxref{opt-attr documentation}) may also be marked as @option{settable} (@pxref{opt-attr settable}) and have special callback functions (either @samp{flag-code}, @samp{extract-code}, or @samp{call-proc}). @table @samp @item flag-code @vindex flag-code statements to execute when the option is encountered. This may be used in conjunction with option argument types that cause AutoOpts to emit handler code. If you do this, the @samp{flag-code} with index zero (0) is emitted into the handler code @emph{before} the argument is handled, and the entry with index one (1) is handled afterward. The generated procedure will be laid out something like this: @example static void doOpt(tOptions* pOptions, tOptDesc* pOptDesc) @{ @} @end example Only certain fields within the @code{tOptions} and @code{tOptDesc} structures may be accessed. @xref{Option Processing Data}. When writing this code, you must be very careful with the @code{pOptions} pointer. The handler code is called with this pointer set to special values for handling special situations. Your code must handle them. As an example, look at @code{optionEnumerationVal} in @file{enum.c}. @item extract-code @vindex extract-code This is effectively identical to @code{flag-code}, except that the source is kept in the output file instead of the definitions file and you cannot use this in conjunction with options with arguments, other than string arguments. A long comment is used to demarcate the code. You must not modify that marker. @i{Before} regenerating the option code file, the old file is renamed from MUMBLE.c to MUMBLE.c.save. The template will be looking there for the text to copy into the new output file. @item call-proc @vindex call-proc external procedure to call when option is encountered. The calling sequence must conform to the sequence defined above for the generated procedure, @code{doOpt}. It has the same restrictions regarding the fields within the structures passed in as arguments. @xref{Option Processing Data}. @item flag-proc @vindex flag-proc Name of another option whose @code{flag-code} can be executed when this option is encountered. @item stack-arg @vindex stack-arg Call a special library routine to stack the option's arguments. Special macros in the interface file are provided for determining how many of the options were found (@code{STACKCT_OPT(NAME)}) and to obtain a pointer to a list of pointers to the argument values (@code{STACKLST_OPT(NAME)}). Obviously, for a stackable argument, the @code{max} attribute (@pxref{Common Attributes}) needs to be set higher than @code{1}. If this stacked argument option has a disablement prefix, then the entire stack of arguments will be cleared by specifying the option with that disablement prefix. @item unstack-arg @vindex unstack-arg Call a special library routine to remove (``unstack'') strings from a @code{stack-arg} option stack. This attribute must name the option that is to be ``unstacked''. Neither this option nor the stacked argument option it references may be equivalenced to another option. @end table @node Internationalizing Options @subsection Internationalizing Options @cindex Internationalizing Options Normally, AutoOpts produces usage text that is difficult to translate. It is pieced together on the fly using words and phrases scattered around here and there, piecing together toe document. This does not translate well. Incorporated into this package are some ways around the problem. First, you should specify the @code{full-usage} and @code{short-usage} program attributes (@pxref{program attributes}). This will enable your translators to translate the usage text as a whole. Your translators will also be able to translate long option names. The option name translations will then become the names searched for both on the command line and in configuration files. However, it will not affect the names of environment variable names used to configure your program. If it is considered desireable to keep configuration files in the ``C'' locale, then several macros are available to suppress or delay the translations of option names at run time. These are all disabled if @code{ENABLE_NLS} is not defined at compile time or if @code{no-xlate} has been set to the value @emph{anything}. These macros @strong{must} be invoked before the first invocation of @code{optionProcess}. @table @samp @item OPT_NO_XLAT_CFG_NAMES; @itemx OPT_XLAT_CFG_NAMES; Disable (or enable) the translations of option names for configuration files. If you enable translation for config files, then they will be translated for command line options. @item OPT_NO_XLAT_OPT_NAMES; @itemx OPT_XLAT_OPT_NAMES; Disable (or enable) the translations of option names for command line processing. If you disable the translation for command line processing, you will also disable it for configuration file processing. Once translated, the option names will remain translated. @end table @node documentation attributes @subsection Man and Info doc Attributes @cindex documentation attributes AutoOpts includes AutoGen templates for producing abbreviated man pages and for producing the invoking section of an info document. To take advantage of these templates, you must add several attributes to your option definitions. @table @samp @item arg-name @vindex arg-name If an option has an argument, the argument should have a name for documentation purposes. It will default to @code{arg-type}, but it will likely be clearer with something else like, @code{file-name} instead of @code{string} (the type). @item doc @vindex doc First, every @code{flag} definition @emph{other than} ``documentation'' definitions, must have a @code{doc} attribute defined. If the option takes an argument, then it will need an @code{arg-name} attribute as well. The @code{doc} text should be in plain sentences with minimal formatting. The Texinfo commands @code{@@code}, and @code{@@var} will have its enclosed text made into @strong{\fB} entries in the man page, and the @code{@@file} text will be made into @strong{\fI} entries. The @code{arg-name} attribute is used to display the option's argument in the man page. Options marked with the ``documentation'' attribute are for documenting the usage text. All other options should have the ``doc'' attribute in order to document the usage of the option in the generated man pages. @item option-info @vindex option-info This text will be inserted as a lead-in paragraph in the @code{OPTIONS} section of the generated man page. @item doc-section @vindex doc-section This is a compound attribute that requires three @i{sub}attributes: @table @i @item ds-type This describes the section type. Basically, the title of the section that will be added to all output documentation. There may be only one @code{doc-section} for any given @code{ds-type}. If there are duplicates, the results are undefined (it might work, it might not). There are five categories of @code{ds-type} sections. They are those that the documentation templates would otherwise: @enumerate @item always create itself, ignoring any @code{ds-type}s by this name. These are marked, below, as @code{ao-only}. @item create, if none have been provided. These are marked, @code{alternate}. @item create, but augment if the @code{doc-section} was provided. These are marked, @code{augments}. @item do nothing, but inserts them into the output in a prescribed order. These are marked, @code{known} @item knows nothing about them. They will be alphabetized and inserted after the list of leading sections and before the list of trailing sections. These are not marked because I don't know their names. @end enumerate Some of these are emitted by the documentation templates only if certain conditions are met. If there are conditions, they are explained below. If there are no conditions, then you will always see the named section in the output. The output sections will appear in this order: @table @samp @item NAME @code{ao-only}. @item SYNOPSIS @code{alternate}. @item DESCRIPTION @code{augments}. @item OPTIONS @code{ao-only}. @item OPTION PRESETS @code{ao-only}, if environment presets or configuration file processing has been specified. @item unknown At this point, the unknown, alphabetized sections are inserted. @item IMPLEMENTATION NOTES @code{known} @item ENVIRONMENT @code{augments}, if environment presets have been specified. @item FILES @code{augments}, if configuration file processing has been specified. @item EXAMPLES @code{known} @item EXIT STATUS @code{augments}. @item ERRORS @code{known} @item COMPATIBILITY @code{known} @item SEE ALSO @code{known} @item CONFORMING TO @code{known} @item HISTORY @code{known} @item AUTHORS @code{alternate}, if the @code{copyright} stanza has either an @code{author} or an @code{owner} attribute. @item COPYRIGHT @code{alternate}, if there is a @code{copyright} stanza. @item BUGS @code{augments}, if the @code{copyright} stanza has an @code{eaddr} attribute. @item NOTES @code{augments}. @end table @item ds-format This describes the format of the associated @code{ds-text} section. @code{man}, @code{mdoc} and @code{texi} formats are supported. Regardless of the chosen format, the formatting tags in the output text will be converted to @code{man} macros for @code{man} pages, @code{mdoc} macros for @code{mdoc} pages, and @code{texi} macros for @code{texinfo} pages. @item ds-text This is the descriptive text, written according to the rules for @code{ds-format} documents. @end table Here is an example of a ``doc-section'' for a ``SEE ALSO'' type. @example doc-section = @{ ds-type = 'SEE ALSO'; // or anything else ds-format = 'man'; // or texi or mdoc format ds-text = <<-_EOText_ text relevant to this section type, in the chosen format _EOText_; @}; @end example @item prog-man-descrip @itemx prog-info-descrip @vindex prog-man-descrip @vindex prog-info-descrip These attributes are now deprecated. Please use a @code{doc-section} stanza with a @code{ds-type} attribute set to @code{DESCRIPTION} instead. @item detail @vindex detail This attribute is used to add a very short explanation about what a program is used for when the ``title'' attribute is insufficient. If there is no ``doc-section'' stanza of type ``DESCRIPTION'', then this text is used for the man page DESCRIPTION section, too. @end table @node automatic options @subsection Automatically Supported Options @cindex automatic options AutoOpts provides automated support for several options. @code{help} and @code{more-help} are always provided. The others are conditional upon various global program attributes being defined @xref{program attributes}. Below are the option names and default flag values. The flags are activated if and only if at least one user-defined option also uses a flag value. The long names are supported as option names if @code{long-opts} has been specified. These option flags may be deleted or changed to characters of your choosing by specifying @vindex more-help-value @vindex usage-value @vindex version-value @vindex load-opts-value @vindex reset-value @code{xxx-value = "y";}, where @code{xxx} is one of the option names below and @code{y} is either empty or the character of your choice. For example, to change the help flag from @code{?} to @code{h}, specify @vindex help-value @code{help-value = "h";}; and to require that @code{save-opts} be specified only with its long option name, specify @vindex save-opts-value @code{save-opts-value = "";}. Additionally, the procedure that prints out the program version may be replaced by specifying @code{version-proc}. @vindex version-proc This procedure must be defined to be of external scope (non-static). By default, the AutoOpts library provides @code{optionPrintVersion} and it will be the specified callback function in the option definition structure. With the exception of the @code{load-opts} option, none of these automatically supported options will be recognized in configuration files or environment variables. @table @samp @item help -? This option will immediately invoke the @code{USAGE()} procedure and display the usage line, a description of each option with its description and option usage information. This is followed by the contents of the definition of the @code{detail} text macro. @item more-help -! This option is identical to the @code{help} option, except that the output is passed through a pager program. (@code{more} by default, or the program identified by the @code{PAGER} environment variable.) @item usage -u This option must be requested by specifying, @code{usage-opt} in the option definition file. It will produce abbreviated help text to @file{stdout} and exit with zero status (@code{EXIT_SUCCESS}). @item version -v This will print the program name, title and version. If it is followed by the letter @code{c} and a value for @code{copyright} and @code{owner} have been provided, then the copyright will be printed, too. If it is followed by the letter @code{n}, then the full copyright notice (if available) will be printed. The @code{version} attribute must be specified in the option definition file. @item load-opts -< @cindex configuration file This option will load options from the named file. They will be treated exactly as if they were loaded from the normally found configuration files, but will not be loaded until the option is actually processed. This can also be used within another configuration file, causing them to nest. This is the @strong{only} automatically supported option that can be activated inside of config files or with environment variables. Specifying the negated form of the option (@code{--no-load-opts}) will suppress the processing of configuration files and environment variables. This option is activated by specifying one or more @code{homerc} attributes. @item save-opts -> @cindex configuration file This option will cause the option state to be printed in the configuration file format when option processing is done but not yet verified for consistency. The program will terminate successfully without running when this has completed. Note that for most shells you will have to quote or escape the flag character to restrict special meanings to the shell. The output file will be the configuration file name (default or provided by @code{rcfile}) in the last directory named in a @code{homerc} definition. This option may be set from within your program by invoking the "@code{SET_OPT_SAVE_OPTS(@i{filename})}" macro (@pxref{SET_OPT_name}). Invoking this macro will set the file name for saving the option processing state, but the state will @strong{not} actually be saved. You must call @code{optionSaveFile} to do that (@pxref{libopts-optionSaveFile}). @strong{CAVEAT:} if, after invoking this macro, you call @code{optionProcess}, the option processing state will be saved to this file and @code{optionProcess} will not return. You may wish to invoke @code{CLEAR_OPT( SAVE_OPTS )} (@pxref{CLEAR_OPT}) beforehand if you do need to reinvoke @code{optionProcess}. This option is activated by specifying one or more @code{homerc} attributes. @item reset-option -R This option takes the name of an option for the current program and resets its state such that it is set back to its original, compile-time initialized value. If the option state is subsequently stored (via @code{--save-opts}), the named option will not appear in that file. This option is activated by specifying the @code{resettable} attribute. @strong{BEWARE}: If the @code{resettable} attribute is specified, all option callbacks @strong{must} look for the @code{OPTST_RESET} bit in the @code{fOptState} field of the option descriptor. If set, the @code{optCookie} and @code{optArg} fields will be unchanged from their last setting. When the callback returns, these fields will be set to their original values. If you use this feature and you have allocated data hanging off of the cookie, you need to deallocate it. @end table @node standard options @subsection Library of Standard Options @cindex standard options AutoOpts has developed a set of standardized options. You may incorporate these options in your program simply by @emph{first} adding a @code{#define} for the options you want, and then the line, @example #include stdoptions.def @end example @noindent in your option definitions. The supported options are specified thus: @example #define DEBUG #define DIRECTORY #define DRY_RUN #define INPUT #define INTERACTIVE #define OUTPUT #define WARN #define SILENT #define QUIET #define BRIEF #define VERBOSE @end example By default, only the long form of the option will be available. To specify the short (flag) form, suffix these names with @code{_FLAG}. e.g., @example #define DEBUG_FLAG @end example @code{--silent}, @code{--quiet}, @code{--brief} and @code{--verbose} are related in that they all indicate some level of diagnostic output. These options are all designed to conflict with each other. Instead of four different options, however, several levels can be incorporated by @code{#define}-ing @code{VERBOSE_ENUM}. In conjunction with @code{VERBOSE}, it incorporates the notion of @i{5} levels in an enumeration: @code{silent}, @code{quiet}, @code{brief}, @code{informative} and @code{verbose}; with the default being @code{brief}. @ignore END == AUTOOPTS-MAIN == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore Here is an example program that uses the following set of definitions: @example AutoGen Definitions options; prog-name = default-test; prog-title = 'Default Option Example'; homerc = '$$/../share/default-test', '$HOME', '.'; environrc; long-opts; gnu-usage; usage-opt; version = '1.0'; main = @{ main-type = shell-process; @}; #define DEBUG_FLAG #define WARN_FLAG #define WARN_LEVEL #define VERBOSE_FLAG #define VERBOSE_ENUM #define DRY_RUN_FLAG #define OUTPUT_FLAG #define INPUT_FLAG #define DIRECTORY_FLAG #define INTERACTIVE_FLAG #include stdoptions.def @end example @noindent Running a few simple commands on that definition file: @example autogen default-test.def copts="-DTEST_DEFAULT_TEST_OPTS `autoopts-config cflags`" lopts="`autoopts-config ldflags`" cc -o default-test $@{copts@} default-test.c $@{lopts@} @end example @noindent Yields a program which, when run with @file{--help}, prints out: @example default-test - Default Option Example - Ver. 1.0 USAGE: default-test [ - [] | --[@{=| @}] ]... The following options are commonly used and are provided and supported by AutoOpts: -D, --debug run program with debugging info -V, --verbose=KWd run program with progress info -w, --warn=num specify a warning-level threshhold - disabled as --no-warn -R, --dry-run program will make no changes -I, --interactive=str prompt for confirmation -i, --input=str redirect input from file -o, --output=str redirect output to file -d, --directory=str use specified dir for I/O version, usage and configuration options: -v, --version[=arg] Output version information and exit -?, --help Display extended usage information and exit -!, --more-help Extended usage information passed thru pager -u, --usage Abbreviated usage to stdout ->, --save-opts[=arg] Save the option state to a config file -<, --load-opts=str Load options from a config file - disabled as --no-load-opts - may appear multiple times Options are specified by doubled hyphens and their name or by a single hyphen and the flag character. The following option preset mechanisms are supported: - reading file $$/../share/default-test - reading file $HOME/.default_testrc - reading file ./.default_testrc - examining environment variables named DEFAULT_TEST_* The valid "verbose" option keywords are: silent quiet brief informative verbose or an integer from 0 through 4 Packaged by Bruce (2012-08-11) Report default_test bugs to bkorb@@gnu.org @end example @ignore START == AUTOOPTS-API == DO NOT CHANGE THIS COMMENT or the surrounding 'ignore's Extraction from autogen.texi @end ignore @c === SECTION MARKER @node AutoOpts API @section Programmatic Interface @cindex AutoOpts API The user interface for access to the argument information is completely defined in the generated header file and in the portions of the distributed file "options.h" that are marked "public". In the following macros, text marked @code{} or @code{name} is the name of the option @strong{in upper case} and @strong{segmented with underscores @code{_}}. The macros and enumerations defined in the options header (interface) file are used as follows: To see how these @code{#define} macros are used in a program, the reader is referred to the several @file{opts.h} files included with the AutoGen sources. @menu * Option Processing Data:: Data for Option Processing * CLEAR_OPT:: CLEAR_OPT( ) - Clear Option Markings * COUNT_OPT:: COUNT_OPT( ) - Definition Count * DESC:: DESC( ) - Option Descriptor * DISABLE_OPT_name:: DISABLE_OPT_name - Disable an option * ENABLED_OPT:: ENABLED_OPT( ) - Is Option Enabled? * ERRSKIP_OPTERR:: ERRSKIP_OPTERR - Ignore Option Errors * ERRSTOP_OPTERR:: ERRSTOP_OPTERR - Stop on Errors * HAVE_OPT:: HAVE_OPT( ) - Have this option? * ISSEL_OPT:: ISSEL_OPT( ) - Is Option Selected? * ISUNUSED_OPT:: ISUNUSED_OPT( ) - Never Specified? * OPTION_CT:: OPTION_CT - Full Count of Options * OPT_ARG:: OPT_ARG( ) - Option Argument String * OPT_NO_XLAT_CFG_NAMES:: OPT_NO_XLAT_CFG_NAMES - option name xlation * OPT_NO_XLAT_OPT_NAMES:: OPT_NO_XLAT_OPT_NAMES - option name xlation * OPT_VALUE_name:: OPT_VALUE_name - Option Argument Value * OPT_XLAT_CFG_NAMES:: OPT_XLAT_CFG_NAMES - option name xlation * OPT_XLAT_OPT_NAMES:: OPT_XLAT_OPT_NAMES - option name xlation * RESTART_OPT:: RESTART_OPT( n ) - Resume Option Processing * SET_OPT_name:: SET_OPT_name - Force an option to be set * STACKCT_OPT:: STACKCT_OPT( ) - Stacked Arg Count * STACKLST_OPT:: STACKLST_OPT( ) - Argument Stack * START_OPT:: START_OPT - Restart Option Processing * STATE_OPT:: STATE_OPT( ) - Option State * USAGE:: USAGE( exit-code ) - Usage invocation macro * VALUE_OPT_name:: VALUE_OPT_name - Option Flag Value * VERSION:: VERSION - Version and Full Version * WHICH_IDX_name:: WHICH_IDX_name - Which Equivalenced Index * WHICH_OPT_name:: WHICH_OPT_name - Which Equivalenced Option * teOptIndex:: teOptIndex - Option Index and Enumeration * OPTIONS_STRUCT_VERSION:: OPTIONS_STRUCT_VERSION - active version * libopts procedures:: libopts External Procedures @end menu @node Option Processing Data @subsection Data for Option Processing @cindex Option Processing Data This section describes the data that may be accessed from within the option processing callback routines. The following fields may be used in the following ways and may be used for read only. The first set is addressed from the @code{tOptDesc*} pointer: @table @samp @cindex optIndex @item optIndex @cindex optValue @item optValue These may be used by option procedures to determine which option they are working on (in case they handle several options). @cindex optActualIndex @item optActualIndex @cindex optActualValue @item optActualValue These may be used by option procedures to determine which option was used to set the current option. This may be different from the above if the options are members of an equivalence class. @cindex optOccCt @item optOccCt If AutoOpts is processing command line arguments, then this value will contain the current occurrence count. During the option preset phase (reading configuration files and examining environment variables), the value is zero. @cindex fOptState @item fOptState The field may be tested for the following bit values (prefix each name with @code{OPTST_}, e.g. @code{OPTST_INIT}): @table @samp @item INIT Initial compiled value. As a bit test, it will always yield FALSE. @item SET The option was set via the @code{SET_OPT()} macro. @item PRESET @cindex configuration file The option was set via a configuration file. @item DEFINED The option was set via a command line option. @item SET_MASK This is a mask of flags that show the set state, one of the above four values. @item EQUIVALENCE This bit is set when the option was selected by an equivalenced option. @item DISABLED This bit is set if the option is to be disabled. (Meaning it was a long option prefixed by the disablement prefix, or the option has not been specified yet and initializes as @code{disabled}.) @end table As an example of how this might be used, in AutoGen I want to allow template writers to specify that the template output can be left in a writable or read-only state. To support this, there is a Guile function named @code{set-writable} (@pxref{SCM set-writable}). Also, I provide for command options @code{--writable} and @code{--not-writable}. I give precedence to command line and RC file options, thus: @example switch (STATE_OPT( WRITABLE )) @{ case OPTST_DEFINED: case OPTST_PRESET: fprintf(stderr, zOverrideWarn, pCurTemplate->pzFileName, pCurMacro->lineNo); break; default: if (gh_boolean_p( set ) && (set == SCM_BOOL_F)) CLEAR_OPT( WRITABLE ); else SET_OPT_WRITABLE; @} @end example @cindex pzLastArg @item pzLastArg Pointer to the latest argument string. BEWARE@: If the argument type is numeric, an enumeration or a bit mask, then this will be the argument @strong{value} and not a pointer to a string. @end table The following two fields are addressed from the @code{tOptions*} pointer: @table @samp @cindex pzProgName @item pzProgName Points to a NUL-terminated string containing the current program name, as retrieved from the argument vector. @cindex pzProgPath @item pzProgPath Points to a NUL-terminated string containing the full path of the current program, as retrieved from the argument vector. (If available on your system.) @end table Note@: these fields get filled in during the first call to @code{optionProcess()}. All other fields are private, for the exclusive use of AutoOpts code and are subject to change. @node CLEAR_OPT @subsection CLEAR_OPT( ) - Clear Option Markings @findex CLEAR_OPT Make as if the option had never been specified. @code{HAVE_OPT()} will yield @code{FALSE} after invoking this macro. @node COUNT_OPT @subsection COUNT_OPT( ) - Definition Count @findex COUNT_OPT This macro will tell you how many times the option was specified on the command line. It does not include counts of preset options. @example if (COUNT_OPT( NAME ) != desired-count) @{ make-an-undesirable-message. @} @end example @node DESC @subsection DESC( ) - Option Descriptor @findex DESC This macro is used internally by other AutoOpt macros. It is not for general use. It is used to obtain the option description corresponding to its @strong{UPPER CASED} option name argument. This is primarily used in other macro definitions. @node DISABLE_OPT_name @subsection DISABLE_OPT_name - Disable an option @findex DISABLE_OPT_name This macro is emitted if it is both settable and it can be disabled. If it cannot be disabled, it may always be CLEAR-ed (see above). The form of the macro will actually depend on whether the option is equivalenced to another, and/or has an assigned handler procedure. Unlike the @code{SET_OPT} macro, this macro does not allow an option argument. @example DISABLE_OPT_NAME; @end example @node ENABLED_OPT @subsection ENABLED_OPT( ) - Is Option Enabled? @findex ENABLED_OPT Yields true if the option defaults to disabled and @code{ISUNUSED_OPT()} would yield true. It also yields true if the option has been specified with a disablement prefix, disablement value or the @code{DISABLE_OPT_NAME} macro was invoked. @node ERRSKIP_OPTERR @subsection ERRSKIP_OPTERR - Ignore Option Errors @findex ERRSKIP_OPTERR When it is necessary to continue (return to caller) on option errors, invoke this option. It is reversible. @xref{ERRSTOP_OPTERR}. @node ERRSTOP_OPTERR @subsection ERRSTOP_OPTERR - Stop on Errors @findex ERRSTOP_OPTERR After invoking this macro, if @code{optionProcess()} encounters an error, it will call @code{exit(1)} rather than return. This is the default processing mode. It can be overridden by specifying @code{allow-errors} in the definitions file, or invoking the macro @xref{ERRSKIP_OPTERR}. @node HAVE_OPT @subsection HAVE_OPT( ) - Have this option? @findex HAVE_OPT This macro yields true if the option has been specified in any fashion at all. It is used thus: @example if (HAVE_OPT( NAME )) @{ ; @} @end example @node ISSEL_OPT @subsection ISSEL_OPT( ) - Is Option Selected? @findex ISSEL_OPT This macro yields true if the option has been specified either on the command line or via a SET/DISABLE macro. @node ISUNUSED_OPT @subsection ISUNUSED_OPT( ) - Never Specified? @findex ISUNUSED_OPT This macro yields true if the option has never been specified, or has been cleared via the @code{CLEAR_OPT()} macro. @node OPTION_CT @subsection OPTION_CT - Full Count of Options @findex OPTION_CT The full count of all options, both those defined and those generated automatically by AutoOpts. This is primarily used to initialize the program option descriptor structure. @node OPT_ARG @subsection OPT_ARG( ) - Option Argument String @findex OPT_ARG The option argument value as a pointer to string. Note that argument values that have been specified as numbers are stored as numbers or keywords. For such options, use instead the @code{OPT_VALUE_name} define. It is used thus: @example if (HAVE_OPT( NAME )) @{ char* p = OPT_ARG( NAME ); ; @} @end example @node OPT_NO_XLAT_CFG_NAMES @subsection OPT_NO_XLAT_CFG_NAMES - option name xlation @findex OPT_NO_XLAT_CFG_NAMES Invoking this macro will disable the translation of option names only while processing configuration files and environment variables. This must be invoked before the first call to @code{optionProcess}.. You need not invoke this if your option definition file contains the attribute assignment, ``@code{no-xlate = opt-cfg;}''. @node OPT_NO_XLAT_OPT_NAMES @subsection OPT_NO_XLAT_OPT_NAMES - option name xlation @findex OPT_NO_XLAT_OPT_NAMES Invoking this macro will completely disable the translation of option names. This must be invoked before the first call to @code{optionProcess}. You need not invoke this if your option definition file contains the attribute assignment, ``@code{no-xlate = opt;}''. @node OPT_VALUE_name @subsection OPT_VALUE_name - Option Argument Value @findex OPT_VALUE_name This macro gets emitted only for options that take numeric, keyword or set membership arguments. The macro yields a word-sized integer containing the enumeration, bit set or numeric value for the option argument. @example int opt_val = OPT_VALUE_name; @end example @node OPT_XLAT_CFG_NAMES @subsection OPT_XLAT_CFG_NAMES - option name xlation @findex OPT_XLAT_CFG_NAMES If @code{ENABLE_NLS} is defined and @code{no-xlate} has been not set to the value @emph{anything}, this macro will cause the translation of option names to happen before starting the processing of configuration files and environment variables. This will change the recognition of options within the @code{$PROGRAMNAME} environment variable, but will not alter the names used for setting options via @code{$PROGRAMNAME_name} environment variables. This must be invoked before the first call to @code{optionProcess}. You might need to use this macro if your option definition file contains the attribute assignment, ``@code{no-xlate = opt;}'' or ``@code{no-xlate = opt-cfg;}'', and you have determined in some way that you wish to override that. @node OPT_XLAT_OPT_NAMES @subsection OPT_XLAT_OPT_NAMES - option name xlation @findex OPT_XLAT_OPT_NAMES If @code{ENABLE_NLS} is defined and @code{no-xlate} has been not set to the value @emph{anything}, translate the option names before processing the command line options. Long option names may thus be localized. (If the names were translated before configuration processing, they will not be re-translated.) This must be invoked before the first call to @code{optionProcess}. You might need to use this macro if your option definition file contains the attribute assignment, ``@code{no-xlate = opt;}'' and you have determined in some way that you wish to override that. @node RESTART_OPT @subsection RESTART_OPT( n ) - Resume Option Processing @findex RESTART_OPT If option processing has stopped (either because of an error or something was encountered that looked like a program argument), it can be resumed by providing this macro with the index @code{n} of the next option to process and calling @code{optionProcess()} again. @node SET_OPT_name @subsection SET_OPT_name - Force an option to be set @findex SET_OPT_name This macro gets emitted only when the given option has the @code{settable} attribute specified. The form of the macro will actually depend on whether the option is equivalenced to another, has an option argument and/or has an assigned handler procedure. If the option has an argument, then this macro will too. Beware that the argument is not reallocated, so the value must not be on the stack or deallocated in any other way for as long as the value might get referenced. If you have supplied at least one @file{homerc} file (@pxref{program attributes}), this macro will be emitted for the @code{--save-opts} option. @example SET_OPT_SAVE_OPTS( "filename" ); @end example @noindent @xref{automatic options}, for a discussion of the implications of using this particular example. @node STACKCT_OPT @subsection STACKCT_OPT( ) - Stacked Arg Count @findex STACKCT_OPT When the option handling attribute is specified as @code{stack_arg}, this macro may be used to determine how many of them actually got stacked. Do not use this on options that have not been stacked or has not been specified (the @code{stack_arg} attribute must have been specified, and @code{HAVE_OPT()} must yield TRUE). Otherwise, you will likely seg fault. @example if (HAVE_OPT( NAME )) @{ int ct = STACKCT_OPT( NAME ); char** pp = STACKLST_OPT( NAME ); do @{ char* p = *pp++; do-things-with-p; @} while (--ct > 0); @} @end example @node STACKLST_OPT @subsection STACKLST_OPT( ) - Argument Stack @findex STACKLST_OPT The address of the list of pointers to the option arguments. The pointers are ordered by the order in which they were encountered in the option presets and command line processing. Do not use this on options that have not been stacked or has not been specified (the @code{stack_arg} attribute must have been specified, and @code{HAVE_OPT(