/** @file * IPRT - Threads. */ /* * Copyright (C) 2006-2013 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_thread_h #define ___iprt_thread_h #include #include #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_thread RTThread - Thread Management * @ingroup grp_rt * @{ */ /** * The thread state. */ typedef enum RTTHREADSTATE { /** The usual invalid 0 value. */ RTTHREADSTATE_INVALID = 0, /** The thread is being initialized. */ RTTHREADSTATE_INITIALIZING, /** The thread has terminated */ RTTHREADSTATE_TERMINATED, /** Probably running. */ RTTHREADSTATE_RUNNING, /** Waiting on a critical section. */ RTTHREADSTATE_CRITSECT, /** Waiting on a event semaphore. */ RTTHREADSTATE_EVENT, /** Waiting on a event multiple wakeup semaphore. */ RTTHREADSTATE_EVENT_MULTI, /** Waiting on a fast mutex. */ RTTHREADSTATE_FAST_MUTEX, /** Waiting on a mutex. */ RTTHREADSTATE_MUTEX, /** Waiting on a read write semaphore, read (shared) access. */ RTTHREADSTATE_RW_READ, /** Waiting on a read write semaphore, write (exclusive) access. */ RTTHREADSTATE_RW_WRITE, /** The thread is sleeping. */ RTTHREADSTATE_SLEEP, /** Waiting on a spin mutex. */ RTTHREADSTATE_SPIN_MUTEX, /** End of the thread states. */ RTTHREADSTATE_END, /** The usual 32-bit size hack. */ RTTHREADSTATE_32BIT_HACK = 0x7fffffff } RTTHREADSTATE; /** Checks if a thread state indicates that the thread is sleeping. */ #define RTTHREAD_IS_SLEEPING(enmState) ((enmState) >= RTTHREADSTATE_CRITSECT) /** * Thread types. * Besides identifying the purpose of the thread, the thread type is * used to select the scheduling properties. * * The types in are placed in a rough order of ascending priority. */ typedef enum RTTHREADTYPE { /** Invalid type. */ RTTHREADTYPE_INVALID = 0, /** Infrequent poller thread. * This type of thread will sleep for the most of the time, and do * infrequent polls on resources at 0.5 sec or higher intervals. */ RTTHREADTYPE_INFREQUENT_POLLER, /** Main heavy worker thread. * Thread of this type is driving asynchronous tasks in the Main * API which takes a long time and might involve a bit of CPU. Like * for instance creating a fixed sized VDI. */ RTTHREADTYPE_MAIN_HEAVY_WORKER, /** The emulation thread type. * While being a thread with very high workload it still is vital * that it gets scheduled frequently. When possible all other thread * types except DEFAULT and GUI should interrupt this one ASAP when * they become ready. */ RTTHREADTYPE_EMULATION, /** The default thread type. * Since it doesn't say much about the purpose of the thread * nothing special is normally done to the scheduling. This type * should be avoided. * The main thread is registered with default type during RTR3Init() * and that's what the default process priority is derived from. */ RTTHREADTYPE_DEFAULT, /** The GUI thread type * The GUI normally have a low workload but is frequently scheduled * to handle events. When possible the scheduler should not leave * threads of this kind waiting for too long (~50ms). */ RTTHREADTYPE_GUI, /** Main worker thread. * Thread of this type is driving asynchronous tasks in the Main API. * In most cases this means little work an a lot of waiting. */ RTTHREADTYPE_MAIN_WORKER, /** VRDP I/O thread. * These threads are I/O threads in the RDP server will hang around * waiting for data, process it and pass it on. */ RTTHREADTYPE_VRDP_IO, /** The debugger type. * Threads involved in servicing the debugger. It must remain * responsive even when things are running wild in. */ RTTHREADTYPE_DEBUGGER, /** Message pump thread. * Thread pumping messages from one thread/process to another * thread/process. The workload is very small, most of the time * it's blocked waiting for messages to be procduced or processed. * This type of thread will be favored after I/O threads. */ RTTHREADTYPE_MSG_PUMP, /** The I/O thread type. * Doing I/O means shuffling data, waiting for request to arrive and * for them to complete. The thread should be favored when competing * with any other threads except timer threads. */ RTTHREADTYPE_IO, /** The timer thread type. * A timer thread is mostly waiting for the timer to tick * and then perform a little bit of work. Accuracy is important here, * so the thread should be favoured over all threads. If premention can * be configured at thread level, it could be made very short. */ RTTHREADTYPE_TIMER, /** Only used for validation. */ RTTHREADTYPE_END } RTTHREADTYPE; #ifndef IN_RC /** * Checks if the IPRT thread component has been initialized. * * This is used to avoid calling into RTThread before the runtime has been * initialized. * * @returns @c true if it's initialized, @c false if not. */ RTDECL(bool) RTThreadIsInitialized(void); /** * Get the thread handle of the current thread. * * @returns Thread handle. */ RTDECL(RTTHREAD) RTThreadSelf(void); /** * Get the native thread handle of the current thread. * * @returns Native thread handle. */ RTDECL(RTNATIVETHREAD) RTThreadNativeSelf(void); /** * Millisecond granular sleep function. * * @returns VINF_SUCCESS on success. * @returns VERR_INTERRUPTED if a signal or other asynchronous stuff happened * which interrupt the peaceful sleep. * @param cMillies Number of milliseconds to sleep. * 0 milliseconds means yielding the timeslice - deprecated! * @remark See RTThreadNanoSleep() for sleeping for smaller periods of time. */ RTDECL(int) RTThreadSleep(RTMSINTERVAL cMillies); /** * Millisecond granular sleep function, no logger calls. * * Same as RTThreadSleep, except it will never call into the IPRT logger. It * can therefore safely be used in places where the logger is off limits, like * at termination or init time. The electric fence heap is one consumer of * this API. * * @returns VINF_SUCCESS on success. * @returns VERR_INTERRUPTED if a signal or other asynchronous stuff happened * which interrupt the peaceful sleep. * @param cMillies Number of milliseconds to sleep. * 0 milliseconds means yielding the timeslice - deprecated! */ RTDECL(int) RTThreadSleepNoLog(RTMSINTERVAL cMillies); /** * Yields the CPU. * * @returns true if we yielded. * @returns false if it's probable that we didn't yield. */ RTDECL(bool) RTThreadYield(void); /** * Thread function. * * @returns 0 on success. * @param ThreadSelf Thread handle to this thread. * @param pvUser User argument. */ typedef DECLCALLBACK(int) FNRTTHREAD(RTTHREAD ThreadSelf, void *pvUser); /** Pointer to a FNRTTHREAD(). */ typedef FNRTTHREAD *PFNRTTHREAD; /** * Thread creation flags. */ typedef enum RTTHREADFLAGS { /** This flag is used to keep the thread structure around so it can * be waited on after termination. @sa RTThreadWait and * RTThreadWaitNoResume. Not required for RTThreadUserWait and friends! */ RTTHREADFLAGS_WAITABLE = RT_BIT(0), /** The bit number corresponding to the RTTHREADFLAGS_WAITABLE mask. */ RTTHREADFLAGS_WAITABLE_BIT = 0, /** Mask of valid flags, use for validation. */ RTTHREADFLAGS_MASK = RT_BIT(0) } RTTHREADFLAGS; /** * Create a new thread. * * @returns iprt status code. * @param pThread Where to store the thread handle to the new thread. (optional) * @param pfnThread The thread function. * @param pvUser User argument. * @param cbStack The size of the stack for the new thread. * Use 0 for the default stack size. * @param enmType The thread type. Used for deciding scheduling attributes * of the thread. * @param fFlags Flags of the RTTHREADFLAGS type (ORed together). * @param pszName Thread name. * * @remark When called in Ring-0, this API will create a new kernel thread and not a thread in * the context of the calling process. */ RTDECL(int) RTThreadCreate(PRTTHREAD pThread, PFNRTTHREAD pfnThread, void *pvUser, size_t cbStack, RTTHREADTYPE enmType, unsigned fFlags, const char *pszName); /** * Create a new thread. * * Same as RTThreadCreate except the name is given in the RTStrPrintfV form. * * @returns iprt status code. * @param pThread See RTThreadCreate. * @param pfnThread See RTThreadCreate. * @param pvUser See RTThreadCreate. * @param cbStack See RTThreadCreate. * @param enmType See RTThreadCreate. * @param fFlags See RTThreadCreate. * @param pszName Thread name format. * @param va Format arguments. */ RTDECL(int) RTThreadCreateV(PRTTHREAD pThread, PFNRTTHREAD pfnThread, void *pvUser, size_t cbStack, RTTHREADTYPE enmType, uint32_t fFlags, const char *pszNameFmt, va_list va); /** * Create a new thread. * * Same as RTThreadCreate except the name is given in the RTStrPrintf form. * * @returns iprt status code. * @param pThread See RTThreadCreate. * @param pfnThread See RTThreadCreate. * @param pvUser See RTThreadCreate. * @param cbStack See RTThreadCreate. * @param enmType See RTThreadCreate. * @param fFlags See RTThreadCreate. * @param pszName Thread name format. * @param ... Format arguments. */ RTDECL(int) RTThreadCreateF(PRTTHREAD pThread, PFNRTTHREAD pfnThread, void *pvUser, size_t cbStack, RTTHREADTYPE enmType, uint32_t fFlags, const char *pszNameFmt, ...); /** * Gets the native thread id of a IPRT thread. * * @returns The native thread id. * @param Thread The IPRT thread. */ RTDECL(RTNATIVETHREAD) RTThreadGetNative(RTTHREAD Thread); /** * Gets the IPRT thread of a native thread. * * @returns The IPRT thread handle * @returns NIL_RTTHREAD if not a thread known to IPRT. * @param NativeThread The native thread handle/id. */ RTDECL(RTTHREAD) RTThreadFromNative(RTNATIVETHREAD NativeThread); /** * Changes the type of the specified thread. * * @returns iprt status code. * @param Thread The thread which type should be changed. * @param enmType The new thread type. * @remark In Ring-0 it only works if Thread == RTThreadSelf(). */ RTDECL(int) RTThreadSetType(RTTHREAD Thread, RTTHREADTYPE enmType); /** * Wait for the thread to terminate, resume on interruption. * * @returns iprt status code. * Will not return VERR_INTERRUPTED. * @param Thread The thread to wait for. * @param cMillies The number of milliseconds to wait. Use RT_INDEFINITE_WAIT for * an indefinite wait. * @param prc Where to store the return code of the thread. Optional. */ RTDECL(int) RTThreadWait(RTTHREAD Thread, RTMSINTERVAL cMillies, int *prc); /** * Wait for the thread to terminate, return on interruption. * * @returns iprt status code. * @param Thread The thread to wait for. * @param cMillies The number of milliseconds to wait. Use RT_INDEFINITE_WAIT for * an indefinite wait. * @param prc Where to store the return code of the thread. Optional. */ RTDECL(int) RTThreadWaitNoResume(RTTHREAD Thread, RTMSINTERVAL cMillies, int *prc); /** * Gets the name of the current thread thread. * * @returns Pointer to readonly name string. * @returns NULL on failure. */ RTDECL(const char *) RTThreadSelfName(void); /** * Gets the name of a thread. * * @returns Pointer to readonly name string. * @returns NULL on failure. * @param Thread Thread handle of the thread to query the name of. */ RTDECL(const char *) RTThreadGetName(RTTHREAD Thread); /** * Gets the type of the specified thread. * * @returns The thread type. * @returns RTTHREADTYPE_INVALID if the thread handle is invalid. * @param Thread The thread in question. */ RTDECL(RTTHREADTYPE) RTThreadGetType(RTTHREAD Thread); /** * Sets the name of a thread. * * @returns iprt status code. * @param Thread Thread handle of the thread to query the name of. * @param pszName The thread name. */ RTDECL(int) RTThreadSetName(RTTHREAD Thread, const char *pszName); /** * Checks if the specified thread is the main thread. * * @returns true if it is, false if it isn't. * * @param hThread The thread handle. */ RTDECL(bool) RTThreadIsMain(RTTHREAD hThread); /** * Checks if the calling thread is known to IPRT. * * @returns @c true if it is, @c false if it isn't. */ RTDECL(bool) RTThreadIsSelfKnown(void); /** * Checks if the calling thread is know to IPRT and is alive. * * @returns @c true if it is, @c false if it isn't. */ RTDECL(bool) RTThreadIsSelfAlive(void); /** * Checks if the calling thread is known to IPRT. * * @returns @c true if it is, @c false if it isn't. */ RTDECL(bool) RTThreadIsOperational(void); /** * Signal the user event. * * @returns iprt status code. */ RTDECL(int) RTThreadUserSignal(RTTHREAD Thread); /** * Wait for the user event. * * @returns iprt status code. * @param Thread The thread to wait for. * @param cMillies The number of milliseconds to wait. Use RT_INDEFINITE_WAIT for * an indefinite wait. */ RTDECL(int) RTThreadUserWait(RTTHREAD Thread, RTMSINTERVAL cMillies); /** * Wait for the user event, return on interruption. * * @returns iprt status code. * @param Thread The thread to wait for. * @param cMillies The number of milliseconds to wait. Use RT_INDEFINITE_WAIT for * an indefinite wait. */ RTDECL(int) RTThreadUserWaitNoResume(RTTHREAD Thread, RTMSINTERVAL cMillies); /** * Reset the user event. * * @returns iprt status code. * @param Thread The thread to reset. */ RTDECL(int) RTThreadUserReset(RTTHREAD Thread); /** * Pokes the thread. * * This will signal the thread, attempting to interrupt whatever it's currently * doing. This is *NOT* implemented on all platforms and may cause unresolved * symbols during linking or VERR_NOT_IMPLEMENTED at runtime. * * @returns IPRT status code. * * @param hThread The thread to poke. This must not be the * calling thread. */ RTDECL(int) RTThreadPoke(RTTHREAD hThread); # ifdef IN_RING0 /** * Check if preemption is currently enabled or not for the current thread. * * @note This may return true even on systems where preemption isn't * possible. In that case, it means no call to RTThreadPreemptDisable * has been made and interrupts are still enabled. * * @returns true if preemption is enabled, false if preemetion is disabled. * @param hThread Must be NIL_RTTHREAD for now. */ RTDECL(bool) RTThreadPreemptIsEnabled(RTTHREAD hThread); /** * Check if preemption is pending for the current thread. * * This function should be called regularly when executing larger portions of * code with preemption disabled. * * @returns true if pending, false if not. * @param hThread Must be NIL_RTTHREAD for now. */ RTDECL(bool) RTThreadPreemptIsPending(RTTHREAD hThread); /** * Is RTThreadPreemptIsPending reliable? * * @returns true if reliable, false if not. */ RTDECL(bool) RTThreadPreemptIsPendingTrusty(void); /** * Is preemption possible on this system. * * @returns true if possible, false if not. */ RTDECL(bool) RTThreadPreemptIsPossible(void); /** * Preemption state saved by RTThreadPreemptDisable and used by * RTThreadPreemptRestore to restore the previous state. */ typedef struct RTTHREADPREEMPTSTATE { /** In debug builds this will be used to check for cpu migration. */ RTCPUID idCpu; # ifdef RT_OS_WINDOWS /** The old IRQL. Don't touch! */ unsigned char uchOldIrql; /** Reserved, MBZ. */ uint8_t bReserved1; /** Reserved, MBZ. */ uint8_t bReserved2; /** Reserved, MBZ. */ uint8_t bReserved3; # define RTTHREADPREEMPTSTATE_INITIALIZER { NIL_RTCPUID, 255, 0, 0, 0 } # elif defined(RT_OS_HAIKU) /** The cpu_state. Don't touch! */ uint32_t uOldCpuState; # define RTTHREADPREEMPTSTATE_INITIALIZER { NIL_RTCPUID, 0 } # elif defined(RT_OS_SOLARIS) /** The Old PIL. Don't touch! */ uint32_t uOldPil; # define RTTHREADPREEMPTSTATE_INITIALIZER { NIL_RTCPUID, UINT32_MAX } # else /** Reserved, MBZ. */ uint32_t u32Reserved; # define RTTHREADPREEMPTSTATE_INITIALIZER { NIL_RTCPUID, 0 } # endif } RTTHREADPREEMPTSTATE; /** Pointer to a preemption state. */ typedef RTTHREADPREEMPTSTATE *PRTTHREADPREEMPTSTATE; /** * Disable preemption. * * A call to this function must be matched by exactly one call to * RTThreadPreemptRestore(). * * @param pState Where to store the preemption state. */ RTDECL(void) RTThreadPreemptDisable(PRTTHREADPREEMPTSTATE pState); /** * Restores the preemption state, undoing a previous call to * RTThreadPreemptDisable. * * A call to this function must be matching a previous call to * RTThreadPreemptDisable. * * @param pState The state return by RTThreadPreemptDisable. */ RTDECL(void) RTThreadPreemptRestore(PRTTHREADPREEMPTSTATE pState); /** * Check if the thread is executing in interrupt context. * * @returns true if in interrupt context, false if not. * @param hThread Must be NIL_RTTHREAD for now. */ RTDECL(bool) RTThreadIsInInterrupt(RTTHREAD hThread); /** * Thread-context events. */ typedef enum RTTHREADCTXEVENT { /** This thread is about to be preempted. */ RTTHREADCTXEVENT_PREEMPTING = 0, /** This thread has just been resumed. */ RTTHREADCTXEVENT_RESUMED, /** The usual 32-bit size hack. */ RTTHREADCTXEVENT_32BIT_HACK = 0x7fffffff } RTTHREADCTXEVENT; /** * Thread-context hook. * * @returns IPRT status code. * @param enmEvent The thread-context event. * @param pvUser User argument. * * @remarks This function may be called under different contexts, i.e. with * different locks held, with/without preemption disabled depending on * the event in @a enmEvent. */ typedef DECLCALLBACK(void) FNRTTHREADCTXHOOK(RTTHREADCTXEVENT enmEvent, void *pvUser); /** Pointer to a thread-context hook. */ typedef FNRTTHREADCTXHOOK *PFNRTTHREADCTXHOOK; /** * Initializes a thread-context hook for the current thread. * * This must be called once per-thread before using RTThreadCtxHooksRegister(). * * @returns IPRT status code. * @param phThreadCtx Where to store the thread-context handle. * * @remarks This must be called with preemption enabled! */ RTDECL(int) RTThreadCtxHooksCreate(PRTTHREADCTX phThreadCtx); /** * Retains a new reference to a thread-context hook. * * @returns New reference count. * UINT32_MAX is returned if the handle is invalid (asserted). * @param phThreadCtx Pointer to the thread-context handle. * * @remarks This can be called from any thread. Can be called with preemption * disabled. */ RTDECL(uint32_t) RTThreadCtxHooksRetain(RTTHREADCTX hThreadCtx); /** * Releases a reference to a thread-context hook. * * @returns New reference count. * @retval 0 if the thread-context hook was freed or @a hThreadCtx is * NIL_RTTHREADCTX. * @retval UINT32_MAX is returned if the handle is invalid (asserted). * * @param hThreadCtx The thread-context handle. * * @remarks This can be called from any thread but must be called with * preemption enabled! */ RTDECL(uint32_t) RTThreadCtxHooksRelease(RTTHREADCTX hThreadCtx); /** * Registers a thread-context hook for the current thread to receive * notifications for all supported thread-context events. * * @returns IPRT status code. * @param hThreadCtx The thread-context handle. * @param pfnThreadHook Pointer to a thread-context hook (a callback) * for all thread-context events. * @param pvUser User argument (optional, can be NULL). * * @remarks Can be called with preemption disabled. */ RTDECL(int) RTThreadCtxHooksRegister(RTTHREADCTX hThreadCtx, PFNRTTHREADCTXHOOK pfnThreadHook, void *pvUser); /** * Deregisters the thread-context hook for the current thread. * * @returns IPRT status code. * @param hThreadCtx The thread-context handle. * * @remarks Can be called with preemption disabled. */ RTDECL(int) RTThreadCtxHooksDeregister(RTTHREADCTX hThreadCtx); /** * Are thread-context hooks registered for the thread? * * @returns true if registered, false if not supported or not registered. * @param hThreadCtx The thread-context handle. * * @remarks Can be called from any thread (but possibility of races when * it's not the current thread!) */ RTDECL(bool) RTThreadCtxHooksAreRegistered(RTTHREADCTX hThreadCtx); # endif /* IN_RING0 */ # ifdef IN_RING3 /** * Adopts a non-IPRT thread. * * @returns IPRT status code. * @param enmType The thread type. * @param fFlags The thread flags. RTTHREADFLAGS_WAITABLE is not currently allowed. * @param pszName The thread name. Optional * @param pThread Where to store the thread handle. Optional. */ RTDECL(int) RTThreadAdopt(RTTHREADTYPE enmType, unsigned fFlags, const char *pszName, PRTTHREAD pThread); /** * Get the thread handle of the current thread, automatically adopting alien * threads. * * @returns Thread handle. */ RTDECL(RTTHREAD) RTThreadSelfAutoAdopt(void); /** * Gets the affinity mask of the current thread. * * @returns IPRT status code. * @param pCpuSet Where to return the CPU affienty set of the calling * thread. */ RTR3DECL(int) RTThreadGetAffinity(PRTCPUSET pCpuSet); /** * Sets the affinity mask of the current thread. * * @returns iprt status code. * @param pCpuSet The set of CPUs this thread can run on. NULL means * all CPUs. */ RTR3DECL(int) RTThreadSetAffinity(PCRTCPUSET pCpuSet); /** * Binds the thread to one specific CPU. * * @returns iprt status code. * @param idCpu The ID of the CPU to bind this thread to. Use * NIL_RTCPUID to unbind it. */ RTR3DECL(int) RTThreadSetAffinityToCpu(RTCPUID idCpu); /** * Unblocks a thread. * * This function is paired with RTThreadBlocking and RTThreadBlockingDebug. * * @param hThread The current thread. * @param enmCurState The current state, used to check for nested blocking. * The new state will be running. */ RTDECL(void) RTThreadUnblocked(RTTHREAD hThread, RTTHREADSTATE enmCurState); /** * Change the thread state to blocking. * * @param hThread The current thread. * @param enmState The sleep state. * @param fReallySleeping Really going to sleep now. Use false before calls * to other IPRT synchronization methods. */ RTDECL(void) RTThreadBlocking(RTTHREAD hThread, RTTHREADSTATE enmState, bool fReallySleeping); /** * Get the current thread state. * * A thread that is reported as sleeping may actually still be running inside * the lock validator or/and in the code of some other IPRT synchronization * primitive. Use RTThreadGetReallySleeping * * @returns The thread state. * @param hThread The thread. */ RTDECL(RTTHREADSTATE) RTThreadGetState(RTTHREAD hThread); /** * Checks if the thread is really sleeping or not. * * @returns RTTHREADSTATE_RUNNING if not really sleeping, otherwise the state it * is sleeping in. * @param hThread The thread. */ RTDECL(RTTHREADSTATE) RTThreadGetReallySleeping(RTTHREAD hThread); /** * Translate a thread state into a string. * * @returns Pointer to a read-only string containing the state name. * @param enmState The state. */ RTDECL(const char *) RTThreadStateName(RTTHREADSTATE enmState); /** * Native thread states returned by RTThreadNativeState. */ typedef enum RTTHREADNATIVESTATE { /** Invalid thread handle. */ RTTHREADNATIVESTATE_INVALID = 0, /** Unable to determine the thread state. */ RTTHREADNATIVESTATE_UNKNOWN, /** The thread is running. */ RTTHREADNATIVESTATE_RUNNING, /** The thread is blocked. */ RTTHREADNATIVESTATE_BLOCKED, /** The thread is suspended / stopped. */ RTTHREADNATIVESTATE_SUSPENDED, /** The thread has terminated. */ RTTHREADNATIVESTATE_TERMINATED, /** Make sure it's a 32-bit type. */ RTTHREADNATIVESTATE_32BIT_HACK = 0x7fffffff } RTTHREADNATIVESTATE; /** * Get the native state of a thread. * * @returns Native state. * @param hThread The thread handle. * * @remarks Not yet implemented on all systems, so have a backup plan for * RTTHREADNATIVESTATE_UNKNOWN. */ RTDECL(RTTHREADNATIVESTATE) RTThreadGetNativeState(RTTHREAD hThread); /** * Get the execution times of the specified thread * * @returns IPRT status code. * @param pKernelTime Kernel execution time in ms (out) * @param pUserTime User execution time in ms (out) * */ RTR3DECL(int) RTThreadGetExecutionTimeMilli(uint64_t *pKernelTime, uint64_t *pUserTime); /** @name Thread Local Storage * @{ */ /** * Thread termination callback for destroying a non-zero TLS entry. * * @remarks It is not permitable to use any RTTls APIs at this time. Doing so * may lead to endless loops, crashes, and other bad stuff. * * @param pvValue The current value. */ typedef DECLCALLBACK(void) FNRTTLSDTOR(void *pvValue); /** Pointer to a FNRTTLSDTOR. */ typedef FNRTTLSDTOR *PFNRTTLSDTOR; /** * Allocates a TLS entry (index). * * Example code: * @code RTTLS g_iTls = NIL_RTTLS; ... // once for the process, allocate the TLS index if (g_iTls == NIL_RTTLS) g_iTls = RTTlsAlloc(); // set the thread-local value. RTTlsSet(g_iTls, pMyData); ... // get the thread-local value PMYDATA pMyData = (PMYDATA)RTTlsGet(g_iTls); @endcode * * @returns the index of the allocated TLS entry. * @returns NIL_RTTLS on failure. */ RTR3DECL(RTTLS) RTTlsAlloc(void); /** * Variant of RTTlsAlloc that returns a status code. * * @returns IPRT status code. * @retval VERR_NOT_SUPPORTED if pfnDestructor is non-NULL and the platform * doesn't support this feature. * * @param piTls Where to store the index of the allocated TLS entry. * This is set to NIL_RTTLS on failure. * @param pfnDestructor Optional callback function for cleaning up on * thread termination. WARNING! This feature may not * be implemented everywhere. */ RTR3DECL(int) RTTlsAllocEx(PRTTLS piTls, PFNRTTLSDTOR pfnDestructor); /** * Frees a TLS entry. * * @returns IPRT status code. * @param iTls The index of the TLS entry. */ RTR3DECL(int) RTTlsFree(RTTLS iTls); /** * Get the (thread-local) value stored in a TLS entry. * * @returns value in given TLS entry. * @retval NULL if RTTlsSet() has not yet been called on this thread, or if the * TLS index is invalid. * * @param iTls The index of the TLS entry. */ RTR3DECL(void *) RTTlsGet(RTTLS iTls); /** * Get the value stored in a TLS entry. * * @returns IPRT status code. * @param iTls The index of the TLS entry. * @param ppvValue Where to store the value. The value will be NULL if * RTTlsSet has not yet been called on this thread. */ RTR3DECL(int) RTTlsGetEx(RTTLS iTls, void **ppvValue); /** * Set the value stored in an allocated TLS entry. * * @returns IPRT status. * @param iTls The index of the TLS entry. * @param pvValue The value to store. * * @remarks Note that NULL is considered a special value. */ RTR3DECL(int) RTTlsSet(RTTLS iTls, void *pvValue); /** @} */ # endif /* IN_RING3 */ # endif /* !IN_RC */ /** @} */ RT_C_DECLS_END #endif