/** @file * VBox HDD Container API. */ /* * Copyright (C) 2006-2013 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___VBox_VD_h #define ___VBox_VD_h #include #include #include #include #include #include #include #include #include #include #include RT_C_DECLS_BEGIN #ifdef IN_RING0 # error "There are no VBox HDD Container APIs available in Ring-0 Host Context!" #endif /** @defgroup grp_vd VBox HDD Container * @{ */ /** Current VMDK image version. */ #define VMDK_IMAGE_VERSION (0x0001) /** Current VDI image major version. */ #define VDI_IMAGE_VERSION_MAJOR (0x0001) /** Current VDI image minor version. */ #define VDI_IMAGE_VERSION_MINOR (0x0001) /** Current VDI image version. */ #define VDI_IMAGE_VERSION ((VDI_IMAGE_VERSION_MAJOR << 16) | VDI_IMAGE_VERSION_MINOR) /** Get VDI major version from combined version. */ #define VDI_GET_VERSION_MAJOR(uVer) ((uVer) >> 16) /** Get VDI minor version from combined version. */ #define VDI_GET_VERSION_MINOR(uVer) ((uVer) & 0xffff) /** Placeholder for specifying the last opened image. */ #define VD_LAST_IMAGE 0xffffffffU /** Placeholder for VDCopyEx to indicate that the image content is unknown. */ #define VD_IMAGE_CONTENT_UNKNOWN 0xffffffffU /** @name VBox HDD container image flags * @{ */ /** No flags. */ #define VD_IMAGE_FLAGS_NONE (0) /** Fixed image. */ #define VD_IMAGE_FLAGS_FIXED (0x10000) /** Diff image. Mutually exclusive with fixed image. */ #define VD_IMAGE_FLAGS_DIFF (0x20000) /** VMDK: Split image into 2GB extents. */ #define VD_VMDK_IMAGE_FLAGS_SPLIT_2G (0x0001) /** VMDK: Raw disk image (giving access to a number of host partitions). */ #define VD_VMDK_IMAGE_FLAGS_RAWDISK (0x0002) /** VMDK: stream optimized image, read only. */ #define VD_VMDK_IMAGE_FLAGS_STREAM_OPTIMIZED (0x0004) /** VMDK: ESX variant, use in addition to other flags. */ #define VD_VMDK_IMAGE_FLAGS_ESX (0x0008) /** VDI: Fill new blocks with zeroes while expanding image file. Only valid * for newly created images, never set for opened existing images. */ #define VD_VDI_IMAGE_FLAGS_ZERO_EXPAND (0x0100) /** Mask of valid image flags for VMDK. */ #define VD_VMDK_IMAGE_FLAGS_MASK ( VD_IMAGE_FLAGS_FIXED | VD_IMAGE_FLAGS_DIFF | VD_IMAGE_FLAGS_NONE \ | VD_VMDK_IMAGE_FLAGS_SPLIT_2G | VD_VMDK_IMAGE_FLAGS_RAWDISK \ | VD_VMDK_IMAGE_FLAGS_STREAM_OPTIMIZED | VD_VMDK_IMAGE_FLAGS_ESX) /** Mask of valid image flags for VDI. */ #define VD_VDI_IMAGE_FLAGS_MASK (VD_IMAGE_FLAGS_FIXED | VD_IMAGE_FLAGS_DIFF | VD_IMAGE_FLAGS_NONE | VD_VDI_IMAGE_FLAGS_ZERO_EXPAND) /** Mask of all valid image flags for all formats. */ #define VD_IMAGE_FLAGS_MASK (VD_VMDK_IMAGE_FLAGS_MASK | VD_VDI_IMAGE_FLAGS_MASK) /** Default image flags. */ #define VD_IMAGE_FLAGS_DEFAULT (VD_IMAGE_FLAGS_NONE) /** @} */ /** @name VD image repair flags * @{ */ /** Don't repair the image but check what needs to be done. */ #define VD_REPAIR_DRY_RUN RT_BIT_32(0) /** Mask of all valid repair flags. */ #define VD_REPAIR_FLAGS_MASK (VD_REPAIR_DRY_RUN) /** @} */ /** @name VD image VFS file flags * @{ */ /** Destroy the VD disk container when the VFS file is released. */ #define VD_VFSFILE_DESTROY_ON_RELEASE RT_BIT_32(0) /** Mask of all valid repair flags. */ #define VD_VFSFILE_FLAGS_MASK (VD_VFSFILE_DESTROY_ON_RELEASE) /** @} */ /** * Auxiliary type for describing partitions on raw disks. The entries must be * in ascending order (as far as uStart is concerned), and must not overlap. * Note that this does not correspond 1:1 to partitions, it is describing the * general meaning of contiguous areas on the disk. */ typedef struct VBOXHDDRAWPARTDESC { /** Device to use for this partition/data area. Can be the disk device if * the offset field is set appropriately. If this is NULL, then this * partition will not be accessible to the guest. The size of the data area * must still be set correctly. */ const char *pszRawDevice; /** Pointer to the partitioning info. NULL means this is a regular data * area on disk, non-NULL denotes data which should be copied to the * partition data overlay. */ const void *pvPartitionData; /** Offset where the data starts in this device. */ uint64_t uStartOffset; /** Offset where the data starts in the disk. */ uint64_t uStart; /** Size of the data area. */ uint64_t cbData; } VBOXHDDRAWPARTDESC, *PVBOXHDDRAWPARTDESC; /** * Auxiliary data structure for difference between GPT and MBR * disks. */ typedef enum VBOXHDDPARTTYPE { MBR, GPT } VBOXHDDPARTTYPE; /** * Auxiliary data structure for creating raw disks. */ typedef struct VBOXHDDRAW { /** Signature for structure. Must be 'R', 'A', 'W', '\\0'. Actually a trick * to make logging of the comment string produce sensible results. */ char szSignature[4]; /** Flag whether access to full disk should be given (ignoring the * partition information below). */ bool fRawDisk; /** Filename for the raw disk. Ignored for partitioned raw disks. * For Linux e.g. /dev/sda, and for Windows e.g. \\\\.\\PhysicalDisk0. */ const char *pszRawDisk; /** Number of entries in the partition descriptor array. */ unsigned cPartDescs; /** Pointer to the partition descriptor array. */ PVBOXHDDRAWPARTDESC pPartDescs; /** Partitioning type of the disk */ VBOXHDDPARTTYPE uPartitioningType; } VBOXHDDRAW, *PVBOXHDDRAW; /** @name VBox HDD container image open mode flags * @{ */ /** Try to open image in read/write exclusive access mode if possible, or in read-only elsewhere. */ #define VD_OPEN_FLAGS_NORMAL 0 /** Open image in read-only mode with sharing access with others. */ #define VD_OPEN_FLAGS_READONLY RT_BIT(0) /** Honor zero block writes instead of ignoring them whenever possible. * This is not supported by all formats. It is silently ignored in this case. */ #define VD_OPEN_FLAGS_HONOR_ZEROES RT_BIT(1) /** Honor writes of the same data instead of ignoring whenever possible. * This is handled generically, and is only meaningful for differential image * formats. It is silently ignored otherwise. */ #define VD_OPEN_FLAGS_HONOR_SAME RT_BIT(2) /** Do not perform the base/diff image check on open. This does NOT imply * opening the image as readonly (would break e.g. adding UUIDs to VMDK files * created by other products). Images opened with this flag should only be * used for querying information, and nothing else. */ #define VD_OPEN_FLAGS_INFO RT_BIT(3) /** Open image for asynchronous access. Only available if VD_CAP_ASYNC_IO is * set. VDOpen fails with VERR_NOT_SUPPORTED if this operation is not supported for * this kind of image. */ #define VD_OPEN_FLAGS_ASYNC_IO RT_BIT(4) /** Allow sharing of the image for writable images. May be ignored if the * format backend doesn't support this type of concurrent access. */ #define VD_OPEN_FLAGS_SHAREABLE RT_BIT(5) /** Ask the backend to switch to sequential accesses if possible. Opening * will not fail if it cannot do this, the flag will be simply ignored. */ #define VD_OPEN_FLAGS_SEQUENTIAL RT_BIT(6) /** Allow the discard operation if supported. Only available if VD_CAP_DISCARD * is set. VDOpen fails with VERR_VD_DISCARD_NOT_SUPPORTED if discarding is not * supported. */ #define VD_OPEN_FLAGS_DISCARD RT_BIT(7) /** Ignore all flush requests to workaround certain filesystems which are slow * when writing a lot of cached data to the medium. * Use with extreme care as a host crash can result in completely corrupted and * unusable images. */ #define VD_OPEN_FLAGS_IGNORE_FLUSH RT_BIT(8) /** * Return VINF_VD_NEW_ZEROED_BLOCK for reads from unallocated blocks. * The caller who uses the flag has to make sure that the read doesn't cross * a block boundary. Because the block size can differ between images reading one * sector at a time is the safest solution. */ #define VD_OPEN_FLAGS_INFORM_ABOUT_ZERO_BLOCKS RT_BIT(9) /** * Don't do unnecessary consistency checks when opening the image. * Only valid when the image is opened in readonly because inconsistencies * can lead to corrupted images in read-write mode. */ #define VD_OPEN_FLAGS_SKIP_CONSISTENCY_CHECKS RT_BIT(10) /** Mask of valid flags. */ #define VD_OPEN_FLAGS_MASK (VD_OPEN_FLAGS_NORMAL | VD_OPEN_FLAGS_READONLY | VD_OPEN_FLAGS_HONOR_ZEROES | VD_OPEN_FLAGS_HONOR_SAME | VD_OPEN_FLAGS_INFO | VD_OPEN_FLAGS_ASYNC_IO | VD_OPEN_FLAGS_SHAREABLE | VD_OPEN_FLAGS_SEQUENTIAL | VD_OPEN_FLAGS_DISCARD | VD_OPEN_FLAGS_IGNORE_FLUSH | VD_OPEN_FLAGS_INFORM_ABOUT_ZERO_BLOCKS | VD_OPEN_FLAGS_SKIP_CONSISTENCY_CHECKS) /** @}*/ /** * Helper functions to handle open flags. */ /** * Translate VD_OPEN_FLAGS_* to RTFile open flags. * * @return RTFile open flags. * @param uOpenFlags VD_OPEN_FLAGS_* open flags. * @param fCreate Flag that the file should be created. */ DECLINLINE(uint32_t) VDOpenFlagsToFileOpenFlags(unsigned uOpenFlags, bool fCreate) { AssertMsg(!((uOpenFlags & VD_OPEN_FLAGS_READONLY) && fCreate), ("Image can't be opened readonly while being created\n")); uint32_t fOpen = 0; if (RT_UNLIKELY(uOpenFlags & VD_OPEN_FLAGS_READONLY)) fOpen |= RTFILE_O_READ | RTFILE_O_DENY_NONE; else { fOpen |= RTFILE_O_READWRITE; if (RT_UNLIKELY(uOpenFlags & VD_OPEN_FLAGS_SHAREABLE)) fOpen |= RTFILE_O_DENY_NONE; else fOpen |= RTFILE_O_DENY_WRITE; } if (RT_UNLIKELY(fCreate)) fOpen |= RTFILE_O_CREATE | RTFILE_O_NOT_CONTENT_INDEXED; else fOpen |= RTFILE_O_OPEN; return fOpen; } /** @name VBox HDD container backend capability flags * @{ */ /** Supports UUIDs as expected by VirtualBox code. */ #define VD_CAP_UUID RT_BIT(0) /** Supports creating fixed size images, allocating all space instantly. */ #define VD_CAP_CREATE_FIXED RT_BIT(1) /** Supports creating dynamically growing images, allocating space on demand. */ #define VD_CAP_CREATE_DYNAMIC RT_BIT(2) /** Supports creating images split in chunks of a bit less than 2GBytes. */ #define VD_CAP_CREATE_SPLIT_2G RT_BIT(3) /** Supports being used as differencing image format backend. */ #define VD_CAP_DIFF RT_BIT(4) /** Supports asynchronous I/O operations for at least some configurations. */ #define VD_CAP_ASYNC RT_BIT(5) /** The backend operates on files. The caller needs to know to handle the * location appropriately. */ #define VD_CAP_FILE RT_BIT(6) /** The backend uses the config interface. The caller needs to know how to * provide the mandatory configuration parts this way. */ #define VD_CAP_CONFIG RT_BIT(7) /** The backend uses the network stack interface. The caller has to provide * the appropriate interface. */ #define VD_CAP_TCPNET RT_BIT(8) /** The backend supports VFS (virtual filesystem) functionality since it uses * VDINTERFACEIO exclusively for all file operations. */ #define VD_CAP_VFS RT_BIT(9) /** The backend supports the discard operation. */ #define VD_CAP_DISCARD RT_BIT(10) /** @}*/ /** @name VBox HDD container type. * @{ */ typedef enum VDTYPE { /** Invalid. */ VDTYPE_INVALID = 0, /** HardDisk */ VDTYPE_HDD, /** CD/DVD */ VDTYPE_DVD, /** Floppy. */ VDTYPE_FLOPPY } VDTYPE; /** @}*/ /** @name Configuration interface key handling flags. * @{ */ /** Mandatory config key. Not providing a value for this key will cause * the backend to fail. */ #define VD_CFGKEY_MANDATORY RT_BIT(0) /** Expert config key. Not showing it by default in the GUI is is probably * a good idea, as the average user won't understand it easily. */ #define VD_CFGKEY_EXPERT RT_BIT(1) /** @}*/ /** * Configuration value type for configuration information interface. */ typedef enum VDCFGVALUETYPE { /** Integer value. */ VDCFGVALUETYPE_INTEGER = 1, /** String value. */ VDCFGVALUETYPE_STRING, /** Bytestring value. */ VDCFGVALUETYPE_BYTES } VDCFGVALUETYPE; /** * Structure describing configuration keys required/supported by a backend * through the config interface. */ typedef struct VDCONFIGINFO { /** Key name of the configuration. */ const char *pszKey; /** Pointer to default value (descriptor). NULL if no useful default value * can be specified. */ const char *pszDefaultValue; /** Value type for this key. */ VDCFGVALUETYPE enmValueType; /** Key handling flags (a combination of VD_CFGKEY_* flags). */ uint64_t uKeyFlags; } VDCONFIGINFO; /** Pointer to structure describing configuration keys. */ typedef VDCONFIGINFO *PVDCONFIGINFO; /** Pointer to const structure describing configuration keys. */ typedef const VDCONFIGINFO *PCVDCONFIGINFO; /** * Structure describing a file extension. */ typedef struct VDFILEEXTENSION { /** Pointer to the NULL-terminated string containing the extension. */ const char *pszExtension; /** The device type the extension supports. */ VDTYPE enmType; } VDFILEEXTENSION; /** Pointer to a structure describing a file extension. */ typedef VDFILEEXTENSION *PVDFILEEXTENSION; /** Pointer to a const structure describing a file extension. */ typedef const VDFILEEXTENSION *PCVDFILEEXTENSION; /** * Data structure for returning a list of backend capabilities. */ typedef struct VDBACKENDINFO { /** Name of the backend. Must be unique even with case insensitive comparison. */ const char *pszBackend; /** Capabilities of the backend (a combination of the VD_CAP_* flags). */ uint64_t uBackendCaps; /** Pointer to a NULL-terminated array of strings, containing the supported * file extensions. Note that some backends do not work on files, so this * pointer may just contain NULL. */ PCVDFILEEXTENSION paFileExtensions; /** Pointer to an array of structs describing each supported config key. * Terminated by a NULL config key. Note that some backends do not support * the configuration interface, so this pointer may just contain NULL. * Mandatory if the backend sets VD_CAP_CONFIG. */ PCVDCONFIGINFO paConfigInfo; /** Returns a human readable hard disk location string given a * set of hard disk configuration keys. The returned string is an * equivalent of the full file path for image-based hard disks. * Mandatory for backends with no VD_CAP_FILE and NULL otherwise. */ DECLR3CALLBACKMEMBER(int, pfnComposeLocation, (PVDINTERFACE pConfig, char **pszLocation)); /** Returns a human readable hard disk name string given a * set of hard disk configuration keys. The returned string is an * equivalent of the file name part in the full file path for * image-based hard disks. Mandatory for backends with no * VD_CAP_FILE and NULL otherwise. */ DECLR3CALLBACKMEMBER(int, pfnComposeName, (PVDINTERFACE pConfig, char **pszName)); } VDBACKENDINFO, *PVDBACKENDINFO; /** * Request completion callback for the async read/write API. */ typedef void (FNVDASYNCTRANSFERCOMPLETE) (void *pvUser1, void *pvUser2, int rcReq); /** Pointer to a transfer compelte callback. */ typedef FNVDASYNCTRANSFERCOMPLETE *PFNVDASYNCTRANSFERCOMPLETE; /** * Disk geometry. */ typedef struct VDGEOMETRY { /** Number of cylinders. */ uint32_t cCylinders; /** Number of heads. */ uint32_t cHeads; /** Number of sectors. */ uint32_t cSectors; } VDGEOMETRY; /** Pointer to disk geometry. */ typedef VDGEOMETRY *PVDGEOMETRY; /** Pointer to constant disk geometry. */ typedef const VDGEOMETRY *PCVDGEOMETRY; /** * VBox HDD Container main structure. */ /* Forward declaration, VBOXHDD structure is visible only inside VBox HDD module. */ struct VBOXHDD; typedef struct VBOXHDD VBOXHDD; typedef VBOXHDD *PVBOXHDD; /** * Initializes HDD backends. * * @returns VBox status code. */ VBOXDDU_DECL(int) VDInit(void); /** * Destroys loaded HDD backends. * * @returns VBox status code. */ VBOXDDU_DECL(int) VDShutdown(void); /** * Lists all HDD backends and their capabilities in a caller-provided buffer. * * @return VBox status code. * VERR_BUFFER_OVERFLOW if not enough space is passed. * @param cEntriesAlloc Number of list entries available. * @param pEntries Pointer to array for the entries. * @param pcEntriesUsed Number of entries returned. */ VBOXDDU_DECL(int) VDBackendInfo(unsigned cEntriesAlloc, PVDBACKENDINFO pEntries, unsigned *pcEntriesUsed); /** * Lists the capabilities of a backend identified by its name. * * @return VBox status code. * @param pszBackend The backend name (case insensitive). * @param pEntries Pointer to an entry. */ VBOXDDU_DECL(int) VDBackendInfoOne(const char *pszBackend, PVDBACKENDINFO pEntry); /** * Allocates and initializes an empty HDD container. * No image files are opened. * * @return VBox status code. * @param pVDIfsDisk Pointer to the per-disk VD interface list. * @param enmType Type of the image container. * @param ppDisk Where to store the reference to HDD container. */ VBOXDDU_DECL(int) VDCreate(PVDINTERFACE pVDIfsDisk, VDTYPE enmType, PVBOXHDD *ppDisk); /** * Destroys HDD container. * If container has opened image files they will be closed. * * @return VBox status code. * @param pDisk Pointer to HDD container. */ VBOXDDU_DECL(int) VDDestroy(PVBOXHDD pDisk); /** * Try to get the backend name which can use this image. * * @return VBox status code. * VINF_SUCCESS if a plugin was found. * ppszFormat contains the string which can be used as backend name. * VERR_NOT_SUPPORTED if no backend was found. * @param pVDIfsDisk Pointer to the per-disk VD interface list. * @param pVDIfsImage Pointer to the per-image VD interface list. * @param pszFilename Name of the image file for which the backend is queried. * @param ppszFormat Receives pointer of the UTF-8 string which contains the format name. * The returned pointer must be freed using RTStrFree(). * @param penmType Where to store the type of the image. */ VBOXDDU_DECL(int) VDGetFormat(PVDINTERFACE pVDIfsDisk, PVDINTERFACE pVDIfsImage, const char *pszFilename, char **ppszFormat, VDTYPE *penmType); /** * Opens an image file. * * The first opened image file in HDD container must have a base image type, * others (next opened images) must be differencing or undo images. * Linkage is checked for differencing image to be consistent with the previously opened image. * When another differencing image is opened and the last image was opened in read/write access * mode, then the last image is reopened in read-only with deny write sharing mode. This allows * other processes to use images in read-only mode too. * * Note that the image is opened in read-only mode if a read/write open is not possible. * Use VDIsReadOnly to check open mode. * * @return VBox status code. * @param pDisk Pointer to HDD container. * @param pszBackend Name of the image file backend to use (case insensitive). * @param pszFilename Name of the image file to open. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * @param pVDIfsImage Pointer to the per-image VD interface list. */ VBOXDDU_DECL(int) VDOpen(PVBOXHDD pDisk, const char *pszBackend, const char *pszFilename, unsigned uOpenFlags, PVDINTERFACE pVDIfsImage); /** * Opens a cache image. * * @return VBox status code. * @param pDisk Pointer to the HDD container which should use the cache image. * @param pszBackend Name of the cache file backend to use (case insensitive). * @param pszFilename Name of the cache image to open. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * @param pVDIfsCache Pointer to the per-cache VD interface list. */ VBOXDDU_DECL(int) VDCacheOpen(PVBOXHDD pDisk, const char *pszBackend, const char *pszFilename, unsigned uOpenFlags, PVDINTERFACE pVDIfsCache); /** * Creates and opens a new base image file. * * @return VBox status code. * @param pDisk Pointer to HDD container. * @param pszBackend Name of the image file backend to use (case insensitive). * @param pszFilename Name of the image file to create. * @param cbSize Image size in bytes. * @param uImageFlags Flags specifying special image features. * @param pszComment Pointer to image comment. NULL is ok. * @param pPCHSGeometry Pointer to physical disk geometry <= (16383,16,63). Not NULL. * @param pLCHSGeometry Pointer to logical disk geometry <= (x,255,63). Not NULL. * @param pUuid New UUID of the image. If NULL, a new UUID is created. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * @param pVDIfsImage Pointer to the per-image VD interface list. * @param pVDIfsOperation Pointer to the per-operation VD interface list. */ VBOXDDU_DECL(int) VDCreateBase(PVBOXHDD pDisk, const char *pszBackend, const char *pszFilename, uint64_t cbSize, unsigned uImageFlags, const char *pszComment, PCVDGEOMETRY pPCHSGeometry, PCVDGEOMETRY pLCHSGeometry, PCRTUUID pUuid, unsigned uOpenFlags, PVDINTERFACE pVDIfsImage, PVDINTERFACE pVDIfsOperation); /** * Creates and opens a new differencing image file in HDD container. * See comments for VDOpen function about differencing images. * * @return VBox status code. * @param pDisk Pointer to HDD container. * @param pszBackend Name of the image file backend to use (case insensitive). * @param pszFilename Name of the differencing image file to create. * @param uImageFlags Flags specifying special image features. * @param pszComment Pointer to image comment. NULL is ok. * @param pUuid New UUID of the image. If NULL, a new UUID is created. * @param pParentUuid New parent UUID of the image. If NULL, the UUID is queried automatically. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * @param pVDIfsImage Pointer to the per-image VD interface list. * @param pVDIfsOperation Pointer to the per-operation VD interface list. */ VBOXDDU_DECL(int) VDCreateDiff(PVBOXHDD pDisk, const char *pszBackend, const char *pszFilename, unsigned uImageFlags, const char *pszComment, PCRTUUID pUuid, PCRTUUID pParentUuid, unsigned uOpenFlags, PVDINTERFACE pVDIfsImage, PVDINTERFACE pVDIfsOperation); /** * Creates and opens new cache image file in HDD container. * * @return VBox status code. * @param pDisk Name of the cache file backend to use (case insensitive). * @param pszFilename Name of the differencing cache file to create. * @param cbSize Maximum size of the cache. * @param uImageFlags Flags specifying special cache features. * @param pszComment Pointer to image comment. NULL is ok. * @param pUuid New UUID of the image. If NULL, a new UUID is created. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * @param pVDIfsCache Pointer to the per-cache VD interface list. * @param pVDIfsOperation Pointer to the per-operation VD interface list. */ VBOXDDU_DECL(int) VDCreateCache(PVBOXHDD pDisk, const char *pszBackend, const char *pszFilename, uint64_t cbSize, unsigned uImageFlags, const char *pszComment, PCRTUUID pUuid, unsigned uOpenFlags, PVDINTERFACE pVDIfsCache, PVDINTERFACE pVDIfsOperation); /** * Merges two images (not necessarily with direct parent/child relationship). * As a side effect the source image and potentially the other images which * are also merged to the destination are deleted from both the disk and the * images in the HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImageFrom Image number to merge from, counts from 0. 0 is always base image of container. * @param nImageTo Image number to merge to, counts from 0. 0 is always base image of container. * @param pVDIfsOperation Pointer to the per-operation VD interface list. */ VBOXDDU_DECL(int) VDMerge(PVBOXHDD pDisk, unsigned nImageFrom, unsigned nImageTo, PVDINTERFACE pVDIfsOperation); /** * Copies an image from one HDD container to another - extended version. * The copy is opened in the target HDD container. * It is possible to convert between different image formats, because the * backend for the destination may be different from the source. * If both the source and destination reference the same HDD container, * then the image is moved (by copying/deleting or renaming) to the new location. * The source container is unchanged if the move operation fails, otherwise * the image at the new location is opened in the same way as the old one was. * * @note The read/write accesses across disks are not synchronized, just the * accesses to each disk. Once there is a use case which requires a defined * read/write behavior in this situation this needs to be extended. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDiskFrom Pointer to source HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pDiskTo Pointer to destination HDD container. * @param pszBackend Name of the image file backend to use (may be NULL to use the same as the source, case insensitive). * @param pszFilename New name of the image (may be NULL to specify that the * copy destination is the destination container, or * if pDiskFrom == pDiskTo, i.e. when moving). * @param fMoveByRename If true, attempt to perform a move by renaming (if successful the new size is ignored). * @param cbSize New image size (0 means leave unchanged). * @param nImageSameFrom The number of the last image in the source chain having the same content as the * image in the destination chain given by nImageSameTo or * VD_IMAGE_CONTENT_UNKNOWN to indicate that the content of both containers is unknown. * See the notes for further information. * @param nImageSameTo The number of the last image in the destination chain having the same content as the * image in the source chain given by nImageSameFrom or * VD_IMAGE_CONTENT_UNKNOWN to indicate that the content of both containers is unknown. * See the notes for further information. * @param uImageFlags Flags specifying special destination image features. * @param pDstUuid New UUID of the destination image. If NULL, a new UUID is created. * This parameter is used if and only if a true copy is created. * In all rename/move cases or copy to existing image cases the modification UUIDs are copied over. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * Only used if the destination image is created. * @param pVDIfsOperation Pointer to the per-operation VD interface list. * @param pDstVDIfsImage Pointer to the per-image VD interface list, for the * destination image. * @param pDstVDIfsOperation Pointer to the per-operation VD interface list, * for the destination operation. * * @note Using nImageSameFrom and nImageSameTo can lead to a significant speedup * when copying an image but can also lead to a corrupted copy if used incorrectly. * It is mainly useful when cloning a chain of images and it is known that * the virtual disk content of the two chains is exactly the same upto a certain image. * Example: * Imagine the chain of images which consist of a base and one diff image. * Copying the chain starts with the base image. When copying the first * diff image VDCopy() will read the data from the diff of the source chain * and probably from the base image again in case the diff doesn't has data * for the block. However the block will be optimized away because VDCopy() * reads data from the base image of the destination chain compares the to * and suppresses the write because the data is unchanged. * For a lot of diff images this will be a huge waste of I/O bandwidth if * the diff images contain only few changes. * Because it is known that the base image of the source and the destination chain * have the same content it is enough to check the diff image for changed data * and copy it to the destination diff image which is achieved with * nImageSameFrom and nImageSameTo. Setting both to 0 can suppress a lot of I/O. */ VBOXDDU_DECL(int) VDCopyEx(PVBOXHDD pDiskFrom, unsigned nImage, PVBOXHDD pDiskTo, const char *pszBackend, const char *pszFilename, bool fMoveByRename, uint64_t cbSize, unsigned nImageFromSame, unsigned nImageToSame, unsigned uImageFlags, PCRTUUID pDstUuid, unsigned uOpenFlags, PVDINTERFACE pVDIfsOperation, PVDINTERFACE pDstVDIfsImage, PVDINTERFACE pDstVDIfsOperation); /** * Copies an image from one HDD container to another. * The copy is opened in the target HDD container. * It is possible to convert between different image formats, because the * backend for the destination may be different from the source. * If both the source and destination reference the same HDD container, * then the image is moved (by copying/deleting or renaming) to the new location. * The source container is unchanged if the move operation fails, otherwise * the image at the new location is opened in the same way as the old one was. * * @note The read/write accesses across disks are not synchronized, just the * accesses to each disk. Once there is a use case which requires a defined * read/write behavior in this situation this needs to be extended. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDiskFrom Pointer to source HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pDiskTo Pointer to destination HDD container. * @param pszBackend Name of the image file backend to use (may be NULL to use the same as the source, case insensitive). * @param pszFilename New name of the image (may be NULL to specify that the * copy destination is the destination container, or * if pDiskFrom == pDiskTo, i.e. when moving). * @param fMoveByRename If true, attempt to perform a move by renaming (if successful the new size is ignored). * @param cbSize New image size (0 means leave unchanged). * @param uImageFlags Flags specifying special destination image features. * @param pDstUuid New UUID of the destination image. If NULL, a new UUID is created. * This parameter is used if and only if a true copy is created. * In all rename/move cases or copy to existing image cases the modification UUIDs are copied over. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * Only used if the destination image is created. * @param pVDIfsOperation Pointer to the per-operation VD interface list. * @param pDstVDIfsImage Pointer to the per-image VD interface list, for the * destination image. * @param pDstVDIfsOperation Pointer to the per-operation VD interface list, * for the destination operation. */ VBOXDDU_DECL(int) VDCopy(PVBOXHDD pDiskFrom, unsigned nImage, PVBOXHDD pDiskTo, const char *pszBackend, const char *pszFilename, bool fMoveByRename, uint64_t cbSize, unsigned uImageFlags, PCRTUUID pDstUuid, unsigned uOpenFlags, PVDINTERFACE pVDIfsOperation, PVDINTERFACE pDstVDIfsImage, PVDINTERFACE pDstVDIfsOperation); /** * Optimizes the storage consumption of an image. Typically the unused blocks * have to be wiped with zeroes to achieve a substantial reduced storage use. * Another optimization done is reordering the image blocks, which can provide * a significant performance boost, as reads and writes tend to use less random * file offsets. * * @note Compaction is treated as a single operation with regard to thread * synchronization, which means that it potentially blocks other activities for * a long time. The complexity of compaction would grow even more if concurrent * accesses have to be handled. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @return VERR_VD_IMAGE_READ_ONLY if image is not writable. * @return VERR_NOT_SUPPORTED if this kind of image can be compacted, but * this isn't supported yet. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pVDIfsOperation Pointer to the per-operation VD interface list. */ VBOXDDU_DECL(int) VDCompact(PVBOXHDD pDisk, unsigned nImage, PVDINTERFACE pVDIfsOperation); /** * Resizes the given disk image to the given size. It is OK if there are * multiple images open in the container. In this case the last disk image * will be resized. * * @return VBox status * @return VERR_VD_IMAGE_READ_ONLY if image is not writable. * @return VERR_NOT_SUPPORTED if this kind of image can be compacted, but * * @param pDisk Pointer to the HDD container. * @param cbSize New size of the image. * @param pPCHSGeometry Pointer to the new physical disk geometry <= (16383,16,63). Not NULL. * @param pLCHSGeometry Pointer to the new logical disk geometry <= (x,255,63). Not NULL. * @param pVDIfsOperation Pointer to the per-operation VD interface list. */ VBOXDDU_DECL(int) VDResize(PVBOXHDD pDisk, uint64_t cbSize, PCVDGEOMETRY pPCHSGeometry, PCVDGEOMETRY pLCHSGeometry, PVDINTERFACE pVDIfsOperation); /** * Closes the last opened image file in HDD container. * If previous image file was opened in read-only mode (the normal case) and * the last opened image is in read-write mode then the previous image will be * reopened in read/write mode. * * @return VBox status code. * @return VERR_VD_NOT_OPENED if no image is opened in HDD container. * @param pDisk Pointer to HDD container. * @param fDelete If true, delete the image from the host disk. */ VBOXDDU_DECL(int) VDClose(PVBOXHDD pDisk, bool fDelete); /** * Closes the currently opened cache image file in HDD container. * * @return VBox status code. * @return VERR_VD_NOT_OPENED if no cache is opened in HDD container. * @param pDisk Pointer to HDD container. * @param fDelete If true, delete the image from the host disk. */ VBOXDDU_DECL(int) VDCacheClose(PVBOXHDD pDisk, bool fDelete); /** * Closes all opened image files in HDD container. * * @return VBox status code. * @param pDisk Pointer to HDD container. */ VBOXDDU_DECL(int) VDCloseAll(PVBOXHDD pDisk); /** * Read data from virtual HDD. * * @return VBox status code. * @return VERR_VD_NOT_OPENED if no image is opened in HDD container. * @param pDisk Pointer to HDD container. * @param uOffset Offset of first reading byte from start of disk. * Must be aligned to a sector boundary. * @param pvBuffer Pointer to buffer for reading data. * @param cbBuffer Number of bytes to read. * Must be aligned to a sector boundary. */ VBOXDDU_DECL(int) VDRead(PVBOXHDD pDisk, uint64_t uOffset, void *pvBuffer, size_t cbBuffer); /** * Write data to virtual HDD. * * @return VBox status code. * @return VERR_VD_NOT_OPENED if no image is opened in HDD container. * @param pDisk Pointer to HDD container. * @param uOffset Offset of first writing byte from start of disk. * Must be aligned to a sector boundary. * @param pvBuffer Pointer to buffer for writing data. * @param cbBuffer Number of bytes to write. * Must be aligned to a sector boundary. */ VBOXDDU_DECL(int) VDWrite(PVBOXHDD pDisk, uint64_t uOffset, const void *pvBuffer, size_t cbBuffer); /** * Make sure the on disk representation of a virtual HDD is up to date. * * @return VBox status code. * @return VERR_VD_NOT_OPENED if no image is opened in HDD container. * @param pDisk Pointer to HDD container. */ VBOXDDU_DECL(int) VDFlush(PVBOXHDD pDisk); /** * Get number of opened images in HDD container. * * @return Number of opened images for HDD container. 0 if no images have been opened. * @param pDisk Pointer to HDD container. */ VBOXDDU_DECL(unsigned) VDGetCount(PVBOXHDD pDisk); /** * Get read/write mode of HDD container. * * @return Virtual disk ReadOnly status. * @return true if no image is opened in HDD container. * @param pDisk Pointer to HDD container. */ VBOXDDU_DECL(bool) VDIsReadOnly(PVBOXHDD pDisk); /** * Get sector size of an image in HDD container. * * @return Virtual disk sector size in bytes. * @return 0 if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. */ VBOXDDU_DECL(uint32_t) VDGetSectorSize(PVBOXHDD pDisk, unsigned nImage); /** * Get total capacity of an image in HDD container. * * @return Virtual disk size in bytes. * @return 0 if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. */ VBOXDDU_DECL(uint64_t) VDGetSize(PVBOXHDD pDisk, unsigned nImage); /** * Get total file size of an image in HDD container. * * @return Virtual disk size in bytes. * @return 0 if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. */ VBOXDDU_DECL(uint64_t) VDGetFileSize(PVBOXHDD pDisk, unsigned nImage); /** * Get virtual disk PCHS geometry of an image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @return VERR_VD_GEOMETRY_NOT_SET if no geometry present in the HDD container. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pPCHSGeometry Where to store PCHS geometry. Not NULL. */ VBOXDDU_DECL(int) VDGetPCHSGeometry(PVBOXHDD pDisk, unsigned nImage, PVDGEOMETRY pPCHSGeometry); /** * Store virtual disk PCHS geometry of an image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pPCHSGeometry Where to load PCHS geometry from. Not NULL. */ VBOXDDU_DECL(int) VDSetPCHSGeometry(PVBOXHDD pDisk, unsigned nImage, PCVDGEOMETRY pPCHSGeometry); /** * Get virtual disk LCHS geometry of an image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @return VERR_VD_GEOMETRY_NOT_SET if no geometry present in the HDD container. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pLCHSGeometry Where to store LCHS geometry. Not NULL. */ VBOXDDU_DECL(int) VDGetLCHSGeometry(PVBOXHDD pDisk, unsigned nImage, PVDGEOMETRY pLCHSGeometry); /** * Store virtual disk LCHS geometry of an image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pLCHSGeometry Where to load LCHS geometry from. Not NULL. */ VBOXDDU_DECL(int) VDSetLCHSGeometry(PVBOXHDD pDisk, unsigned nImage, PCVDGEOMETRY pLCHSGeometry); /** * Get version of image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param puVersion Where to store the image version. */ VBOXDDU_DECL(int) VDGetVersion(PVBOXHDD pDisk, unsigned nImage, unsigned *puVersion); /** * List the capabilities of image backend in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to the HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pbackendInfo Where to store the backend information. */ VBOXDDU_DECL(int) VDBackendInfoSingle(PVBOXHDD pDisk, unsigned nImage, PVDBACKENDINFO pBackendInfo); /** * Get flags of image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param puImageFlags Where to store the image flags. */ VBOXDDU_DECL(int) VDGetImageFlags(PVBOXHDD pDisk, unsigned nImage, unsigned *puImageFlags); /** * Get open flags of image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param puOpenFlags Where to store the image open flags. */ VBOXDDU_DECL(int) VDGetOpenFlags(PVBOXHDD pDisk, unsigned nImage, unsigned *puOpenFlags); /** * Set open flags of image in HDD container. * This operation may cause file locking changes and/or files being reopened. * Note that in case of unrecoverable error all images in HDD container will be closed. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. */ VBOXDDU_DECL(int) VDSetOpenFlags(PVBOXHDD pDisk, unsigned nImage, unsigned uOpenFlags); /** * Get base filename of image in HDD container. Some image formats use * other filenames as well, so don't use this for anything but informational * purposes. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @return VERR_BUFFER_OVERFLOW if pszFilename buffer too small to hold filename. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pszFilename Where to store the image file name. * @param cbFilename Size of buffer pszFilename points to. */ VBOXDDU_DECL(int) VDGetFilename(PVBOXHDD pDisk, unsigned nImage, char *pszFilename, unsigned cbFilename); /** * Get the comment line of image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @return VERR_BUFFER_OVERFLOW if pszComment buffer too small to hold comment text. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pszComment Where to store the comment string of image. NULL is ok. * @param cbComment The size of pszComment buffer. 0 is ok. */ VBOXDDU_DECL(int) VDGetComment(PVBOXHDD pDisk, unsigned nImage, char *pszComment, unsigned cbComment); /** * Changes the comment line of image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pszComment New comment string (UTF-8). NULL is allowed to reset the comment. */ VBOXDDU_DECL(int) VDSetComment(PVBOXHDD pDisk, unsigned nImage, const char *pszComment); /** * Get UUID of image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pUuid Where to store the image UUID. */ VBOXDDU_DECL(int) VDGetUuid(PVBOXHDD pDisk, unsigned nImage, PRTUUID pUuid); /** * Set the image's UUID. Should not be used by normal applications. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pUuid New UUID of the image. If NULL, a new UUID is created. */ VBOXDDU_DECL(int) VDSetUuid(PVBOXHDD pDisk, unsigned nImage, PCRTUUID pUuid); /** * Get last modification UUID of image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pUuid Where to store the image modification UUID. */ VBOXDDU_DECL(int) VDGetModificationUuid(PVBOXHDD pDisk, unsigned nImage, PRTUUID pUuid); /** * Set the image's last modification UUID. Should not be used by normal applications. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pUuid New modification UUID of the image. If NULL, a new UUID is created. */ VBOXDDU_DECL(int) VDSetModificationUuid(PVBOXHDD pDisk, unsigned nImage, PCRTUUID pUuid); /** * Get parent UUID of image in HDD container. * * @return VBox status code. * @return VERR_VD_IMAGE_NOT_FOUND if image with specified number was not opened. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of the container. * @param pUuid Where to store the parent image UUID. */ VBOXDDU_DECL(int) VDGetParentUuid(PVBOXHDD pDisk, unsigned nImage, PRTUUID pUuid); /** * Set the image's parent UUID. Should not be used by normal applications. * * @return VBox status code. * @param pDisk Pointer to HDD container. * @param nImage Image number, counts from 0. 0 is always base image of container. * @param pUuid New parent UUID of the image. If NULL, a new UUID is created. */ VBOXDDU_DECL(int) VDSetParentUuid(PVBOXHDD pDisk, unsigned nImage, PCRTUUID pUuid); /** * Debug helper - dumps all opened images in HDD container into the log file. * * @param pDisk Pointer to HDD container. */ VBOXDDU_DECL(void) VDDumpImages(PVBOXHDD pDisk); /** * Discards unused ranges given as a list. * * @return VBox status code. * @param pDisk Pointer to HDD container. * @param paRanges The array of ranges to discard. * @param cRanges Number of entries in the array. * * @note In contrast to VDCompact() the ranges are always discarded even if they * appear to contain data. This method is mainly used to implement TRIM support. */ VBOXDDU_DECL(int) VDDiscardRanges(PVBOXHDD pDisk, PCRTRANGE paRanges, unsigned cRanges); /** * Start an asynchronous read request. * * @return VBox status code. * @param pDisk Pointer to the HDD container. * @param uOffset The offset of the virtual disk to read from. * @param cbRead How many bytes to read. * @param pcSgBuf Pointer to the S/G buffer to read into. * @param pfnComplete Completion callback. * @param pvUser User data which is passed on completion */ VBOXDDU_DECL(int) VDAsyncRead(PVBOXHDD pDisk, uint64_t uOffset, size_t cbRead, PCRTSGBUF pcSgBuf, PFNVDASYNCTRANSFERCOMPLETE pfnComplete, void *pvUser1, void *pvUser2); /** * Start an asynchronous write request. * * @return VBox status code. * @param pDisk Pointer to the HDD container. * @param uOffset The offset of the virtual disk to write to. * @param cbWrtie How many bytes to write. * @param pcSgBuf Pointer to the S/G buffer to write from. * @param pfnComplete Completion callback. * @param pvUser User data which is passed on completion. */ VBOXDDU_DECL(int) VDAsyncWrite(PVBOXHDD pDisk, uint64_t uOffset, size_t cbWrite, PCRTSGBUF pcSgBuf, PFNVDASYNCTRANSFERCOMPLETE pfnComplete, void *pvUser1, void *pvUser2); /** * Start an asynchronous flush request. * * @return VBox status code. * @param pDisk Pointer to the HDD container. * @param pfnComplete Completion callback. * @param pvUser User data which is passed on completion. */ VBOXDDU_DECL(int) VDAsyncFlush(PVBOXHDD pDisk, PFNVDASYNCTRANSFERCOMPLETE pfnComplete, void *pvUser1, void *pvUser2); /** * Start an asynchronous discard request. * * @return VBox status code. * @param pDisk Pointer to HDD container. * @param paRanges The array of ranges to discard. * @param cRanges Number of entries in the array. * @param pfnComplete Completion callback. * @param pvUser1 User data which is passed on completion. * @param pvUser2 User data which is passed on completion. */ VBOXDDU_DECL(int) VDAsyncDiscardRanges(PVBOXHDD pDisk, PCRTRANGE paRanges, unsigned cRanges, PFNVDASYNCTRANSFERCOMPLETE pfnComplete, void *pvUser1, void *pvUser); /** * Tries to repair a corrupted image. * * @return VBox status code. * @retval VERR_VD_IMAGE_REPAIR_NOT_SUPPORTED if the backend does not support repairing the image. * @retval VERR_VD_IMAGE_REPAIR_IMPOSSIBLE if the corruption is to severe to repair the image. * @param pVDIfsDisk Pointer to the per-disk VD interface list. * @param pVDIfsImage Pointer to the per-image VD interface list. * @param pszFilename Name of the image file to repair. * @param pszFormat The backend to use. * @param fFlags Combination of the VD_REPAIR_* flags. */ VBOXDDU_DECL(int) VDRepair(PVDINTERFACE pVDIfsDisk, PVDINTERFACE pVDIfsImage, const char *pszFilename, const char *pszBackend, uint32_t fFlags); /** * Create a VFS file handle from the given HDD container. * * @return VBox status code. * @param pDisk Pointer to HDD container. * @param fFlags Combination of the VD_VFSFILE_* flags. * @param phVfsFile Where to store the handle to the VFS file on * success. */ VBOXDDU_DECL(int) VDCreateVfsFileFromDisk(PVBOXHDD pDisk, uint32_t fFlags, PRTVFSFILE phVfsFile); RT_C_DECLS_END /** @} */ #endif