/* $Id: VMMDevTesting.h $ */ /** @file * VMMDev - Testing Extensions. */ /* * Copyright (C) 2010-2012 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___VBox_VMMDevTesting_h #define ___VBox_VMMDevTesting_h #include /** The base address of the MMIO range used for testing. * This is intentionally put at the 2nd page above 1M so that it can be * accessed from both real (!A20) and protected mode. */ #define VMMDEV_TESTING_MMIO_BASE UINT32_C(0x00101000) /** The size of the MMIO range used for testing. */ #define VMMDEV_TESTING_MMIO_SIZE UINT32_C(0x00001000) /** The NOP MMIO register - 124 RW. */ #define VMMDEV_TESTING_MMIO_NOP (VMMDEV_TESTING_MMIO_BASE + 0x000) /** The XXX MMIO register - 124 RW. */ #define VMMDEV_TESTING_MMIO_TODO (VMMDEV_TESTING_MMIO_BASE + 0x004) /** The real mode selector to use. * @remarks Requires that the A20 gate is enabled. */ #define VMMDEV_TESTING_MMIO_RM_SEL 0xffff /** Calculate the real mode offset of a MMIO register. */ #define VMMDEV_TESTING_MMIO_RM_OFF(val) ((val) - 0xffff0) /** The base port of the I/O range used for testing. */ #define VMMDEV_TESTING_IOPORT_BASE 0x0510 /** The number of I/O ports reserved for testing. */ #define VMMDEV_TESTING_IOPORT_COUNT 0x0010 /** The NOP I/O port - 1,2,4 RW. */ #define VMMDEV_TESTING_IOPORT_NOP (VMMDEV_TESTING_IOPORT_BASE + 0) /** The low nanosecond timestamp - 4 RO. */ #define VMMDEV_TESTING_IOPORT_TS_LOW (VMMDEV_TESTING_IOPORT_BASE + 1) /** The high nanosecond timestamp - 4 RO. Read this after the low one! */ #define VMMDEV_TESTING_IOPORT_TS_HIGH (VMMDEV_TESTING_IOPORT_BASE + 2) /** Command register usually used for preparing the data register - 4 WO. */ #define VMMDEV_TESTING_IOPORT_CMD (VMMDEV_TESTING_IOPORT_BASE + 3) /** Data register which use depends on the current command - 1s, 4 WO. */ #define VMMDEV_TESTING_IOPORT_DATA (VMMDEV_TESTING_IOPORT_BASE + 4) /** @name Commands. * @{ */ /** Initialize test, sending name (zero terminated string). (RTTestCreate) */ #define VMMDEV_TESTING_CMD_INIT UINT32_C(0xcab1e000) /** Test done, no data. (RTTestSummaryAndDestroy) */ #define VMMDEV_TESTING_CMD_TERM UINT32_C(0xcab1e001) /** Start a new sub-test, sending name (zero terminated string). (RTTestSub) */ #define VMMDEV_TESTING_CMD_SUB_NEW UINT32_C(0xcab1e002) /** Sub-test is done, sending 32-bit error count for it. (RTTestDone) */ #define VMMDEV_TESTING_CMD_SUB_DONE UINT32_C(0xcab1e003) /** Report a failure, sending reason (zero terminated string). (RTTestFailed) */ #define VMMDEV_TESTING_CMD_FAILED UINT32_C(0xcab1e004) /** Report a value, sending the 64-bit value (2x4), the 32-bit unit (4), and * finally the name (zero terminated string). (RTTestValue) */ #define VMMDEV_TESTING_CMD_VALUE UINT32_C(0xcab1e005) /** Report a failure, sending reason (zero terminated string). (RTTestSkipped) */ #define VMMDEV_TESTING_CMD_SKIPPED UINT32_C(0xcab1e006) /** Report a value found in a VMM register, sending a string on the form * "value-name:register-name". */ #define VMMDEV_TESTING_CMD_VALUE_REG UINT32_C(0xcab1e007) /** @} */ /** @name Value units * @{ */ #define VMMDEV_TESTING_UNIT_PCT UINT8_C(0x01) /**< Percentage. */ #define VMMDEV_TESTING_UNIT_BYTES UINT8_C(0x02) /**< Bytes. */ #define VMMDEV_TESTING_UNIT_BYTES_PER_SEC UINT8_C(0x03) /**< Bytes per second. */ #define VMMDEV_TESTING_UNIT_KILOBYTES UINT8_C(0x04) /**< Kilobytes. */ #define VMMDEV_TESTING_UNIT_KILOBYTES_PER_SEC UINT8_C(0x05) /**< Kilobytes per second. */ #define VMMDEV_TESTING_UNIT_MEGABYTES UINT8_C(0x06) /**< Megabytes. */ #define VMMDEV_TESTING_UNIT_MEGABYTES_PER_SEC UINT8_C(0x07) /**< Megabytes per second. */ #define VMMDEV_TESTING_UNIT_PACKETS UINT8_C(0x08) /**< Packets. */ #define VMMDEV_TESTING_UNIT_PACKETS_PER_SEC UINT8_C(0x09) /**< Packets per second. */ #define VMMDEV_TESTING_UNIT_FRAMES UINT8_C(0x0a) /**< Frames. */ #define VMMDEV_TESTING_UNIT_FRAMES_PER_SEC UINT8_C(0x0b) /**< Frames per second. */ #define VMMDEV_TESTING_UNIT_OCCURRENCES UINT8_C(0x0c) /**< Occurrences. */ #define VMMDEV_TESTING_UNIT_OCCURRENCES_PER_SEC UINT8_C(0x0d) /**< Occurrences per second. */ #define VMMDEV_TESTING_UNIT_CALLS UINT8_C(0x0e) /**< Calls. */ #define VMMDEV_TESTING_UNIT_CALLS_PER_SEC UINT8_C(0x0f) /**< Calls per second. */ #define VMMDEV_TESTING_UNIT_ROUND_TRIP UINT8_C(0x10) /**< Round trips. */ #define VMMDEV_TESTING_UNIT_SECS UINT8_C(0x11) /**< Seconds. */ #define VMMDEV_TESTING_UNIT_MS UINT8_C(0x12) /**< Milliseconds. */ #define VMMDEV_TESTING_UNIT_NS UINT8_C(0x13) /**< Nanoseconds. */ #define VMMDEV_TESTING_UNIT_NS_PER_CALL UINT8_C(0x14) /**< Nanoseconds per call. */ #define VMMDEV_TESTING_UNIT_NS_PER_FRAME UINT8_C(0x15) /**< Nanoseconds per frame. */ #define VMMDEV_TESTING_UNIT_NS_PER_OCCURRENCE UINT8_C(0x16) /**< Nanoseconds per occurrence. */ #define VMMDEV_TESTING_UNIT_NS_PER_PACKET UINT8_C(0x17) /**< Nanoseconds per frame. */ #define VMMDEV_TESTING_UNIT_NS_PER_ROUND_TRIP UINT8_C(0x18) /**< Nanoseconds per round trip. */ #define VMMDEV_TESTING_UNIT_INSTRS UINT8_C(0x19) /**< Instructions. */ #define VMMDEV_TESTING_UNIT_INSTRS_PER_SEC UINT8_C(0x1a) /**< Instructions per second. */ #define VMMDEV_TESTING_UNIT_NONE UINT8_C(0x1b) /**< No unit. */ /** @} */ /** What the NOP accesses returns. */ #define VMMDEV_TESTING_NOP_RET UINT32_C(0x64726962) /* bird */ #endif