' $Id: configure.vbs $ '' @file ' The purpose of this script is to check for all external tools, headers, and ' libraries VBox OSE depends on. ' ' The script generates the build configuration file 'AutoConfig.kmk' and the ' environment setup script 'env.bat'. A log of what has been done is ' written to 'configure.log'. ' ' ' Copyright (C) 2006-2012 Oracle Corporation ' ' This file is part of VirtualBox Open Source Edition (OSE), as ' available from http://www.virtualbox.org. This file is free software; ' you can redistribute it and/or modify it under the terms of the GNU ' General Public License (GPL) as published by the Free Software ' Foundation, in version 2 as it comes in the "COPYING" file of the ' VirtualBox OSE distribution. VirtualBox OSE is distributed in the ' hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. ' '***************************************************************************** '* Global Variables * '***************************************************************************** dim g_strPath, g_strEnvFile, g_strLogFile, g_strCfgFile, g_strShellOutput g_strPath = Left(Wscript.ScriptFullName, Len(Wscript.ScriptFullName) - Len("\configure.vbs")) g_strEnvFile = g_strPath & "\env.bat" g_strCfgFile = g_strPath & "\AutoConfig.kmk" g_strLogFile = g_strPath & "\configure.log" 'g_strTmpFile = g_strPath & "\configure.tmp" dim g_objShell, g_objFileSys Set g_objShell = WScript.CreateObject("WScript.Shell") Set g_objFileSys = WScript.CreateObject("Scripting.FileSystemObject") dim g_strPathkBuild, g_strPathkBuildBin, g_strPathDev, g_strPathVCC, g_strPathPSDK, g_strVerPSDK, g_strPathDDK, g_strSubOutput g_strPathkBuild = "" g_strPathDev = "" g_strPathVCC = "" g_strPathPSDK = "" g_strPathDDK = "" dim g_strTargetArch g_strTargetArch = "x86" dim g_blnDisableCOM, g_strDisableCOM g_blnDisableCOM = False g_strDisableCOM = "" ' The internal mode is primarily for skipping some large libraries. dim g_blnInternalMode g_blnInternalMode = False ' Whether to try the internal stuff first or last. dim g_blnInternalFirst g_blnInternalFirst = True '' ' Converts to unix slashes function UnixSlashes(str) UnixSlashes = replace(str, "\", "/") end function '' ' Converts to dos slashes function DosSlashes(str) DosSlashes = replace(str, "/", "\") end function '' ' Read a file (typically the tmp file) into a string. function FileToString(strFilename) const ForReading = 1, TristateFalse = 0 dim objLogFile, str set objFile = g_objFileSys.OpenTextFile(DosSlashes(strFilename), ForReading, False, TristateFalse) str = objFile.ReadAll() objFile.Close() FileToString = str end function '' ' Deletes a file sub FileDelete(strFilename) if g_objFileSys.FileExists(DosSlashes(strFilename)) then g_objFileSys.DeleteFile(DosSlashes(strFilename)) end if end sub '' ' Appends a line to an ascii file. sub FileAppendLine(strFilename, str) const ForAppending = 8, TristateFalse = 0 dim objFile set objFile = g_objFileSys.OpenTextFile(DosSlashes(strFilename), ForAppending, True, TristateFalse) objFile.WriteLine(str) objFile.Close() end sub '' ' Checks if the file exists. function FileExists(strFilename) FileExists = g_objFileSys.FileExists(DosSlashes(strFilename)) end function '' ' Checks if the directory exists. function DirExists(strDirectory) DirExists = g_objFileSys.FolderExists(DosSlashes(strDirectory)) end function '' ' Checks if this is a WOW64 process. function IsWow64() if g_objShell.Environment("PROCESS")("PROCESSOR_ARCHITEW6432") <> "" then IsWow64 = 1 else IsWow64 = 0 end if end function '' ' Returns a reverse sorted array (strings). function ArraySortStrings(arrStrings) for i = LBound(arrStrings) to UBound(arrStrings) str1 = arrStrings(i) for j = i + 1 to UBound(arrStrings) str2 = arrStrings(j) if StrComp(str2, str1) < 0 then arrStrings(j) = str1 str1 = str2 end if next arrStrings(i) = str1 next ArraySortStrings = arrStrings end function '' ' Prints a string array. sub ArrayPrintStrings(arrStrings, strPrefix) for i = LBound(arrStrings) to UBound(arrStrings) Print strPrefix & "arrStrings(" & i & ") = '" & arrStrings(i) & "'" next end sub '' ' Returns a reverse sorted array (strings). function ArrayRSortStrings(arrStrings) ' Sort it. arrStrings = ArraySortStrings(arrStrings) ' Reverse the array. cnt = UBound(arrStrings) - LBound(arrStrings) + 1 if cnt > 0 then j = UBound(arrStrings) iHalf = Fix(LBound(arrStrings) + cnt / 2) for i = LBound(arrStrings) to iHalf - 1 strTmp = arrStrings(i) arrStrings(i) = arrStrings(j) arrStrings(j) = strTmp j = j - 1 next end if ArrayRSortStrings = arrStrings end function '' ' Returns the input array with the string appended. ' Note! There must be some better way of doing this... function ArrayAppend(arr, str) dim i, cnt cnt = UBound(arr) - LBound(arr) + 1 redim arrRet(cnt) for i = LBound(arr) to UBound(arr) arrRet(i) = arr(i) next arrRet(UBound(arr) + 1) = str ArrayAppend = arrRet end function '' ' Translates a register root name to a value function RegTransRoot(strRoot) const HKEY_LOCAL_MACHINE = &H80000002 const HKEY_CURRENT_USER = &H80000001 select case strRoot case "HKLM" RegTransRoot = HKEY_LOCAL_MACHINE case "HKCU" RegTransRoot = HKEY_CURRENT_USER case else MsgFatal "RegTransRoot: Unknown root: '" & strRoot & "'" RegTransRoot = 0 end select end function '' The registry globals dim g_objReg, g_objRegCtx dim g_blnRegistry g_blnRegistry = false '' ' Init the register provider globals. function RegInit() RegInit = false On Error Resume Next if g_blnRegistry = false then set g_objRegCtx = CreateObject("WbemScripting.SWbemNamedValueSet") ' Comment out the following for lines if the cause trouble on your windows version. if IsWow64() then g_objRegCtx.Add "__ProviderArchitecture", 64 g_objRegCtx.Add "__RequiredArchitecture", true end if set objLocator = CreateObject("Wbemscripting.SWbemLocator") set objServices = objLocator.ConnectServer("", "root\default", "", "", , , , g_objRegCtx) set g_objReg = objServices.Get("StdRegProv") g_blnRegistry = true end if RegInit = true end function '' ' Gets a value from the registry. Returns "" if string wasn't found / valid. function RegGetString(strName) RegGetString = "" if RegInit() then dim strRoot, strKey, strValue dim iRoot ' split up into root, key and value parts. strRoot = left(strName, instr(strName, "\") - 1) strKey = mid(strName, instr(strName, "\") + 1, instrrev(strName, "\") - instr(strName, "\")) strValue = mid(strName, instrrev(strName, "\") + 1) ' Must use ExecMethod to call the GetStringValue method because of the context. Set InParms = g_objReg.Methods_("GetStringValue").Inparameters InParms.hDefKey = RegTransRoot(strRoot) InParms.sSubKeyName = strKey InParms.sValueName = strValue On Error Resume Next set OutParms = g_objReg.ExecMethod_("GetStringValue", InParms, , g_objRegCtx) if OutParms.ReturnValue = 0 then RegGetString = OutParms.sValue end if else ' fallback mode On Error Resume Next RegGetString = g_objShell.RegRead(strName) end if end function '' ' Returns an array of subkey strings. function RegEnumSubKeys(strRoot, strKeyPath) dim iRoot iRoot = RegTransRoot(strRoot) RegEnumSubKeys = Array() if RegInit() then ' Must use ExecMethod to call the EnumKey method because of the context. Set InParms = g_objReg.Methods_("EnumKey").Inparameters InParms.hDefKey = RegTransRoot(strRoot) InParms.sSubKeyName = strKeyPath On Error Resume Next set OutParms = g_objReg.ExecMethod_("EnumKey", InParms, , g_objRegCtx) if OutParms.ReturnValue = 0 then RegEnumSubKeys = OutParms.sNames end if else ' fallback mode dim objReg, rc, arrSubKeys set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv") On Error Resume Next rc = objReg.EnumKey(iRoot, strKeyPath, arrSubKeys) if rc = 0 then RegEnumSubKeys = arrSubKeys end if end if end function '' ' Returns an array of full path subkey strings. function RegEnumSubKeysFull(strRoot, strKeyPath) dim arrTmp arrTmp = RegEnumSubKeys(strRoot, strKeyPath) for i = LBound(arrTmp) to UBound(arrTmp) arrTmp(i) = strKeyPath & "\" & arrTmp(i) next RegEnumSubKeysFull = arrTmp end function '' ' Returns an rsorted array of subkey strings. function RegEnumSubKeysRSort(strRoot, strKeyPath) RegEnumSubKeysRSort = ArrayRSortStrings(RegEnumSubKeys(strRoot, strKeyPath)) end function '' ' Returns an rsorted array of subkey strings. function RegEnumSubKeysFullRSort(strRoot, strKeyPath) RegEnumSubKeysFullRSort = ArrayRSortStrings(RegEnumSubKeysFull(strRoot, strKeyPath)) end function '' ' Gets the commandline used to invoke the script. function GetCommandline() dim str, i '' @todo find an api for querying it instead of reconstructing it like this... GetCommandline = "cscript configure.vbs" for i = 1 to WScript.Arguments.Count str = WScript.Arguments.Item(i - 1) if str = "" then str = """""" elseif (InStr(1, str, " ")) then str = """" & str & """" end if GetCommandline = GetCommandline & " " & str next end function '' ' Gets an environment variable. function EnvGet(strName) EnvGet = g_objShell.Environment("PROCESS")(strName) end function '' ' Sets an environment variable. sub EnvSet(strName, strValue) g_objShell.Environment("PROCESS")(strName) = strValue LogPrint "EnvSet: " & strName & "=" & strValue end sub '' ' Appends a string to an environment variable sub EnvAppend(strName, strValue) dim str str = g_objShell.Environment("PROCESS")(strName) g_objShell.Environment("PROCESS")(strName) = str & strValue LogPrint "EnvAppend: " & strName & "=" & str & strValue end sub '' ' Prepends a string to an environment variable sub EnvPrepend(strName, strValue) dim str str = g_objShell.Environment("PROCESS")(strName) g_objShell.Environment("PROCESS")(strName) = strValue & str LogPrint "EnvPrepend: " & strName & "=" & strValue & str end sub '' ' Gets the first non-empty environment variable of the given two. function EnvGetFirst(strName1, strName2) EnvGetFirst = g_objShell.Environment("PROCESS")(strName1) if EnvGetFirst = "" then EnvGetFirst = g_objShell.Environment("PROCESS")(strName2) end if end function '' ' Get the path of the parent directory. Returns root if root was specified. ' Expects abs path. function PathParent(str) PathParent = g_objFileSys.GetParentFolderName(DosSlashes(str)) end function '' ' Strips the filename from at path. function PathStripFilename(str) PathStripFilename = g_objFileSys.GetParentFolderName(DosSlashes(str)) end function '' ' Get the abs path, use the short version if necessary. function PathAbs(str) strAbs = g_objFileSys.GetAbsolutePathName(DosSlashes(str)) strParent = g_objFileSys.GetParentFolderName(strAbs) if strParent = "" then PathAbs = strAbs else strParent = PathAbs(strParent) ' Recurse to resolve parent paths. PathAbs = g_objFileSys.BuildPath(strParent, g_objFileSys.GetFileName(strAbs)) dim obj set obj = Nothing if FileExists(PathAbs) then set obj = g_objFileSys.GetFile(PathAbs) elseif DirExists(PathAbs) then set obj = g_objFileSys.GetFolder(PathAbs) end if if not (obj is nothing) then for each objSub in obj.ParentFolder.SubFolders if obj.Name = objSub.Name or obj.ShortName = objSub.ShortName then if InStr(1, objSub.Name, " ") > 0 _ Or InStr(1, objSub.Name, "&") > 0 _ Or InStr(1, objSub.Name, "$") > 0 _ then PathAbs = g_objFileSys.BuildPath(strParent, objSub.ShortName) if InStr(1, PathAbs, " ") > 0 _ Or InStr(1, PathAbs, "&") > 0 _ Or InStr(1, PathAbs, "$") > 0 _ then MsgFatal "PathAbs(" & str & ") attempted to return filename with problematic " _ & "characters in it (" & PathAbs & "). The tool/sdk referenced will probably " _ & "need to be copied or reinstalled to a location without 'spaces', '$', ';' " _ & "or '&' in the path name. (Unless it's a problem with this script of course...)" end if else PathAbs = g_objFileSys.BuildPath(strParent, objSub.Name) end if exit for end if next end if end if end function '' ' Get the abs path, use the long version. function PathAbsLong(str) strAbs = g_objFileSys.GetAbsolutePathName(DosSlashes(str)) strParent = g_objFileSys.GetParentFolderName(strAbs) if strParent = "" then PathAbsLong = strAbs else strParent = PathAbsLong(strParent) ' Recurse to resolve parent paths. PathAbsLong = g_objFileSys.BuildPath(strParent, g_objFileSys.GetFileName(strAbs)) dim obj set obj = Nothing if FileExists(PathAbsLong) then set obj = g_objFileSys.GetFile(PathAbsLong) elseif DirExists(PathAbsLong) then set obj = g_objFileSys.GetFolder(PathAbsLong) end if if not (obj is nothing) then for each objSub in obj.ParentFolder.SubFolders if obj.Name = objSub.Name or obj.ShortName = objSub.ShortName then PathAbsLong = g_objFileSys.BuildPath(strParent, objSub.Name) exit for end if next end if end if end function '' ' Executes a command in the shell catching output in g_strShellOutput function Shell(strCommand, blnBoth) dim strShell, strCmdline, objExec, str strShell = g_objShell.ExpandEnvironmentStrings("%ComSpec%") if blnBoth = true then strCmdline = strShell & " /c " & strCommand & " 2>&1" else strCmdline = strShell & " /c " & strCommand & " 2>nul" end if LogPrint "# Shell: " & strCmdline Set objExec = g_objShell.Exec(strCmdLine) g_strShellOutput = objExec.StdOut.ReadAll() objExec.StdErr.ReadAll() do while objExec.Status = 0 Wscript.Sleep 20 g_strShellOutput = g_strShellOutput & objExec.StdOut.ReadAll() objExec.StdErr.ReadAll() loop LogPrint "# Status: " & objExec.ExitCode LogPrint "# Start of Output" LogPrint g_strShellOutput LogPrint "# End of Output" Shell = objExec.ExitCode end function '' ' Try find the specified file in the path. function Which(strFile) dim strPath, iStart, iEnd, str ' the path strPath = EnvGet("Path") iStart = 1 do while iStart <= Len(strPath) iEnd = InStr(iStart, strPath, ";") if iEnd <= 0 then iEnd = Len(strPath) + 1 if iEnd > iStart then str = Mid(strPath, iStart, iEnd - iStart) & "/" & strFile if FileExists(str) then Which = str exit function end if end if iStart = iEnd + 1 loop ' registry or somewhere? Which = "" end function '' ' Append text to the log file and echo it to stdout sub Print(str) LogPrint str Wscript.Echo str end sub '' ' Prints a test header sub PrintHdr(strTest) LogPrint "***** Checking for " & strTest & " *****" Wscript.Echo "Checking for " & StrTest & "..." end sub '' ' Prints a success message sub PrintResultMsg(strTest, strResult) LogPrint "** " & strTest & ": " & strResult Wscript.Echo " Found "& strTest & ": " & strResult end sub '' ' Prints a successfully detected path sub PrintResult(strTest, strPath) strLongPath = PathAbsLong(strPath) if PathAbs(strPath) <> strLongPath then LogPrint "** " & strTest & ": " & strPath & " (" & UnixSlashes(strLongPath) & ")" Wscript.Echo " Found " & strTest & ": " & strPath & " (" & UnixSlashes(strLongPath) & ")" else LogPrint "** " & strTest & ": " & strPath Wscript.Echo " Found " & strTest & ": " & strPath end if end sub '' ' Warning message. sub MsgWarning(strMsg) Print "warning: " & strMsg end sub '' ' Fatal error. sub MsgFatal(strMsg) Print "fatal error: " & strMsg Wscript.Quit end sub '' ' Error message, fatal unless flag to ignore errors is given. sub MsgError(strMsg) Print "error: " & strMsg if g_blnInternalMode = False then Wscript.Quit end if end sub '' ' Write a log header with some basic info. sub LogInit FileDelete g_strLogFile LogPrint "# Log file generated by " & Wscript.ScriptFullName for i = 1 to WScript.Arguments.Count LogPrint "# Arg #" & i & ": " & WScript.Arguments.Item(i - 1) next if Wscript.Arguments.Count = 0 then LogPrint "# No arguments given" end if LogPrint "# Reconstructed command line: " & GetCommandline() ' some Wscript stuff LogPrint "# Wscript properties:" LogPrint "# ScriptName: " & Wscript.ScriptName LogPrint "# Version: " & Wscript.Version LogPrint "# Build: " & Wscript.BuildVersion LogPrint "# Name: " & Wscript.Name LogPrint "# Full Name: " & Wscript.FullName LogPrint "# Path: " & Wscript.Path LogPrint "#" ' the environment LogPrint "# Environment:" dim objEnv for each strVar in g_objShell.Environment("PROCESS") LogPrint "# " & strVar next LogPrint "#" end sub '' ' Append text to the log file. sub LogPrint(str) FileAppendLine g_strLogFile, str 'Wscript.Echo "dbg: " & str end sub '' ' Checks if the file exists and logs failures. function LogFileExists(strPath, strFilename) LogFileExists = FileExists(strPath & "/" & strFilename) if LogFileExists = False then LogPrint "Testing '" & strPath & "': " & strFilename & " not found" end if end function '' ' Finds the first file matching the pattern. ' If no file is found, log the failure. function LogFindFile(strPath, strPattern) dim str ' ' Yes, there are some facy database kinda interface to the filesystem ' however, breaking down the path and constructing a usable query is ' too much hassle. So, we'll do it the unix way... ' if Shell("dir /B """ & DosSlashes(strPath) & "\" & DosSlashes(strPattern) & """", True) = 0 _ And InStr(1, g_strShellOutput, Chr(13)) > 1 _ then ' return the first word. LogFindFile = Left(g_strShellOutput, InStr(1, g_strShellOutput, Chr(13)) - 1) else LogPrint "Testing '" & strPath & "': " & strPattern & " not found" LogFindFile = "" end if end function '' ' Finds the first directory matching the pattern. ' If no directory is found, log the failure, ' else return the complete path to the found directory. function LogFindDir(strPath, strPattern) dim str ' ' Yes, there are some facy database kinda interface to the filesystem ' however, breaking down the path and constructing a usable query is ' too much hassle. So, we'll do it the unix way... ' ' List the alphabetically last names as first entries (with /O-N). if Shell("dir /B /AD /O-N """ & DosSlashes(strPath) & "\" & DosSlashes(strPattern) & """", True) = 0 _ And InStr(1, g_strShellOutput, Chr(13)) > 1 _ then ' return the first word. LogFindDir = strPath & "/" & Left(g_strShellOutput, InStr(1, g_strShellOutput, Chr(13)) - 1) else LogPrint "Testing '" & strPath & "': " & strPattern & " not found" LogFindDir = "" end if end function '' ' Initializes the config file. sub CfgInit FileDelete g_strCfgFile CfgPrint "# -*- Makefile -*-" CfgPrint "#" CfgPrint "# Build configuration generated by " & GetCommandline() CfgPrint "#" if g_blnInternalMode = False then CfgPrint "VBOX_OSE := 1" end if end sub '' ' Prints a string to the config file. sub CfgPrint(str) FileAppendLine g_strCfgFile, str end sub '' ' Initializes the environment batch script. sub EnvInit FileDelete g_strEnvFile EnvPrint "@echo off" EnvPrint "rem" EnvPrint "rem Environment setup script generated by " & GetCommandline() EnvPrint "rem" end sub '' ' Prints a string to the environment batch script. sub EnvPrint(str) FileAppendLine g_strEnvFile, str end sub '' ' No COM sub DisableCOM(strReason) if g_blnDisableCOM = False then LogPrint "Disabled COM components: " & strReason g_blnDisableCOM = True g_strDisableCOM = strReason CfgPrint "VBOX_WITH_MAIN=" CfgPrint "VBOX_WITH_QTGUI=" CfgPrint "VBOX_WITH_VBOXSDL=" CfgPrint "VBOX_WITH_DEBUGGER_GUI=" CfgPrint "VBOX_WITHOUT_COM=1" end if end sub '' ' No UDPTunnel sub DisableUDPTunnel(strReason) if g_blnDisableUDPTunnel = False then LogPrint "Disabled UDPTunnel network transport: " & strReason g_blnDisableUDPTunnel = True g_strDisableUDPTunnel = strReason CfgPrint "VBOX_WITH_UDPTUNNEL=" end if end sub '' ' Checks the the path doesn't contain characters the tools cannot deal with. sub CheckSourcePath dim sPwd sPwd = PathAbs(g_strPath) if InStr(1, sPwd, " ") > 0 then MsgError "Source path contains spaces! Please move it. (" & sPwd & ")" end if if InStr(1, sPwd, "$") > 0 then MsgError "Source path contains the '$' char! Please move it. (" & sPwd & ")" end if if InStr(1, sPwd, "%") > 0 then MsgError "Source path contains the '%' char! Please move it. (" & sPwd & ")" end if if InStr(1, sPwd, Chr(10)) > 0 _ Or InStr(1, sPwd, Chr(13)) > 0 _ Or InStr(1, sPwd, Chr(9)) > 0 _ then MsgError "Source path contains control characters! Please move it. (" & sPwd & ")" end if Print "Source path: OK" end sub '' ' Checks for kBuild - very simple :) sub CheckForkBuild(strOptkBuild) PrintHdr "kBuild" ' ' Check if there is a 'kmk' in the path somewhere without ' any KBUILD_*PATH stuff around. ' blnNeedEnvVars = True g_strPathkBuild = strOptkBuild g_strPathkBuildBin = "" if (g_strPathkBuild = "") _ And (EnvGetFirst("KBUILD_PATH", "PATH_KBUILD") = "") _ And (EnvGetFirst("KBUILD_BIN_PATH", "PATH_KBUILD_BIN") = "") _ And (Shell("kmk.exe --version", True) = 0) _ And (InStr(1,g_strShellOutput, "kBuild Make 0.1") > 0) _ And (InStr(1,g_strShellOutput, "KBUILD_PATH") > 0) _ And (InStr(1,g_strShellOutput, "KBUILD_BIN_PATH") > 0) then '' @todo Need to parse out the KBUILD_PATH and KBUILD_BIN_PATH values to complete the other tests. 'blnNeedEnvVars = False MsgWarning "You've installed kBuild it seems. configure.vbs hasn't been updated to " _ & "deal with that yet and will use the one it ships with. Sorry." end if ' ' Check for the KBUILD_PATH env.var. and fall back on root/kBuild otherwise. ' if g_strPathkBuild = "" then g_strPathkBuild = EnvGetFirst("KBUILD_PATH", "PATH_KBUILD") if (g_strPathkBuild <> "") and (FileExists(g_strPathkBuild & "/footer.kmk") = False) then MsgWarning "Ignoring incorrect kBuild path (KBUILD_PATH=" & g_strPathkBuild & ")" g_strPathkBuild = "" end if if g_strPathkBuild = "" then g_strPathkBuild = g_strPath & "/kBuild" end if end if g_strPathkBuild = UnixSlashes(PathAbs(g_strPathkBuild)) ' ' Check for env.vars that kBuild uses (do this early to set g_strTargetArch). ' str = EnvGetFirst("KBUILD_TYPE", "BUILD_TYPE") if (str <> "") _ And (InStr(1, "|release|debug|profile|kprofile", str) <= 0) then EnvPrint "set KBUILD_TYPE=release" EnvSet "KBUILD_TYPE", "release" MsgWarning "Found unknown KBUILD_TYPE value '" & str &"' in your environment. Setting it to 'release'." end if str = EnvGetFirst("KBUILD_TARGET", "BUILD_TARGET") if (str <> "") _ And (InStr(1, "win|win32|win64", str) <= 0) then '' @todo later only 'win' will be valid. remember to fix this check! EnvPrint "set KBUILD_TARGET=win" EnvSet "KBUILD_TARGET", "win" MsgWarning "Found unknown KBUILD_TARGET value '" & str &"' in your environment. Setting it to 'win32'." end if str = EnvGetFirst("KBUILD_TARGET_ARCH", "BUILD_TARGET_ARCH") if (str <> "") _ And (InStr(1, "x86|amd64", str) <= 0) then EnvPrint "set KBUILD_TARGET_ARCH=x86" EnvSet "KBUILD_TARGET_ARCH", "x86" MsgWarning "Found unknown KBUILD_TARGET_ARCH value '" & str &"' in your environment. Setting it to 'x86'." str = "x86" end if if str <> "" then g_strTargetArch = str elseif (EnvGet("PROCESSOR_ARCHITEW6432") = "AMD64" ) _ Or (EnvGet("PROCESSOR_ARCHITECTURE") = "AMD64" ) then g_strTargetArch = "amd64" else g_strTargetArch = "x86" end if str = EnvGetFirst("KBUILD_TARGET_CPU", "BUILD_TARGET_CPU") ' perhaps a bit pedantic this since this isn't clearly define nor used much... if (str <> "") _ And (InStr(1, "i386|i486|i686|i786|i868|k5|k6|k7|k8", str) <= 0) then EnvPrint "set BUILD_TARGET_CPU=i386" EnvSet "KBUILD_TARGET_CPU", "i386" MsgWarning "Found unknown KBUILD_TARGET_CPU value '" & str &"' in your environment. Setting it to 'i386'." end if str = EnvGetFirst("KBUILD_HOST", "BUILD_PLATFORM") if (str <> "") _ And (InStr(1, "win|win32|win64", str) <= 0) then '' @todo later only 'win' will be valid. remember to fix this check! EnvPrint "set KBUILD_HOST=win" EnvSet "KBUILD_HOST", "win" MsgWarning "Found unknown KBUILD_HOST value '" & str &"' in your environment. Setting it to 'win32'." end if str = EnvGetFirst("KBUILD_HOST_ARCH", "BUILD_PLATFORM_ARCH") if (str <> "") _ And (InStr(1, "x86|amd64", str) <= 0) then EnvPrint "set KBUILD_HOST_ARCH=x86" EnvSet "KBUILD_HOST_ARCH", "x86" MsgWarning "Found unknown KBUILD_HOST_ARCH value '" & str &"' in your environment. Setting it to 'x86'." end if str = EnvGetFirst("KBUILD_HOST_CPU", "BUILD_PLATFORM_CPU") ' perhaps a bit pedantic this since this isn't clearly define nor used much... if (str <> "") _ And (InStr(1, "i386|i486|i686|i786|i868|k5|k6|k7|k8", str) <= 0) then EnvPrint "set KBUILD_HOST_CPU=i386" EnvSet "KBUILD_HOST_CPU", "i386" MsgWarning "Found unknown KBUILD_HOST_CPU value '" & str &"' in your environment. Setting it to 'i386'." end if ' ' Determin the location of the kBuild binaries. ' if g_strPathkBuildBin = "" then g_strPathkBuildBin = g_strPathkBuild & "/bin/win." & g_strTargetArch if FileExists(g_strPathkBuild & "/kmk.exe") = False then g_strPathkBuildBin = g_strPathkBuild & "/bin/win.x86" end if end if ' ' Perform basic validations of the kBuild installation. ' if (FileExists(g_strPathkBuild & "/footer.kmk") = False) _ Or (FileExists(g_strPathkBuild & "/header.kmk") = False) _ Or (FileExists(g_strPathkBuild & "/rules.kmk") = False) then MsgFatal "Can't find valid kBuild at '" & g_strPathkBuild & "'. Either there is an " _ & "incorrect KBUILD_PATH in the environment or the checkout didn't succeed." exit sub end if if (FileExists(g_strPathkBuildBin & "/kmk.exe") = False) _ Or (FileExists(g_strPathkBuildBin & "/kmk_ash.exe") = False) then MsgFatal "Can't find valid kBuild binaries at '" & g_strPathkBuildBin & "'. Either there is an " _ & "incorrect KBUILD_PATH in the environment or the checkout didn't succeed." exit sub end if if (Shell(DosSlashes(g_strPathkBuildBin & "/kmk.exe") & " --version", True) <> 0) Then MsgFatal "Can't execute '" & g_strPathkBuildBin & "/kmk.exe --version'. check configure.log for the out." exit sub end if ' ' If PATH_DEV is set, check that it's pointing to something useful. ' str = EnvGet("PATH_DEV") g_strPathDev = str if (str <> "") _ And False then '' @todo add some proper tests here. strNew = UnixSlashes(g_strPath & "/tools") EnvPrint "set PATH_DEV=" & strNew EnvSet "PATH_DEV", strNew MsgWarning "Found PATH_DEV='" & str &"' in your environment. Setting it to '" & strNew & "'." g_strPathDev = strNew end if if g_strPathDev = "" then g_strPathDev = UnixSlashes(g_strPath & "/tools") ' ' Write KBUILD_PATH to the environment script if necessary. ' if blnNeedEnvVars = True then EnvPrint "set KBUILD_PATH=" & g_strPathkBuild EnvSet "KBUILD_PATH", g_strPathkBuild EnvPrint "set PATH=" & g_strPathkBuildBin & ";%PATH%" EnvPrepend "PATH", g_strPathkBuildBin & ";" end if PrintResult "kBuild", g_strPathkBuild PrintResult "kBuild binaries", g_strPathkBuildBin end sub '' ' Checks for Visual C++ version 10 (2010). sub CheckForVisualCPP(strOptVC, strOptVCCommon, blnOptVCExpressEdition) dim strPathVC, strPathVCCommon, str, str2, blnNeedMsPDB PrintHdr "Visual C++" ' ' Try find it... ' strPathVC = "" strPathVCCommon = "" if (strPathVC = "") And (strOptVC <> "") then if CheckForVisualCPPSub(strOptVC, strOptVCCommon, blnOptVCExpressEdition) then strPathVC = strOptVC strPathVCCommon = strOptVCCommon end if end if if (strPathVC = "") And (g_blnInternalFirst = True) Then strPathVC = g_strPathDev & "/win.x86/vcc/v10sp1" if CheckForVisualCPPSub(strPathVC, "", blnOptVCExpressEdition) = False then strPathVC = "" end if end if if (strPathVC = "") _ And (Shell("cl.exe", True) = 0) then str = Which("cl.exe") if FileExists(PathStripFilename(strClExe) & "/build.exe") then ' don't know how to deal with this cl. Warning "Ignoring DDK cl.exe (" & str & ")." else strPathVC = PathParent(PathStripFilename(str)) strPathVCCommon = PathParent(strPathVC) & "/Common7" end if end if if (strPathVC = "") then str = RegGetString("HKLM\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\Setup\VS\ProductDir") if str <> "" Then str2 = str & "Common7" str = str & "VC" if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then strPathVC = str strPathVCCommon = str2 end if end if end if if (strPathVC = "") then str = RegGetString("HKLM\SOFTWARE\Microsoft\VisualStudio\10.0\Setup\VS\ProductDir") if str <> "" Then str2 = str & "Common7" str = str & "VC" if CheckForVisualCPPSub(str, str2, blnOptVCExpressEdition) then strPathVC = str strPathVCCommon = str2 end if end if end if if (strPathVC = "") And (g_blnInternalFirst = False) Then strPathVC = g_strPathDev & "/win.x86/vcc/v10sp1" if CheckForVisualCPPSub(strPathVC, "", blnOptVCExpressEdition) = False then strPathVC = "" end if end if if strPathVC = "" then MsgError "Cannot find cl.exe (Visual C++) anywhere on your system. Check the build requirements." exit sub end if ' ' Clean up the path and determin the VC directory. ' strPathVC = UnixSlashes(PathAbs(strPathVC)) g_strPathVCC = strPathVC ' ' Check the version. ' We'll have to make sure mspdbXX.dll is somewhere in the PATH. ' if (strPathVCCommon <> "") Then EnvAppend "PATH", ";" & strPathVCCommon & "/IDE" end if if Shell(DosSlashes(strPathVC & "/bin/cl.exe"), True) <> 0 then MsgError "Executing '" & strClExe & "' (which we believe to be the Visual C++ compiler driver) failed." exit sub end if if (InStr(1, g_strShellOutput, "Version 16.") <= 0) _ And (InStr(1, g_strShellOutput, "Version 17.") <= 0) then MsgError "The Visual C++ compiler we found ('" & strPathVC & "') isn't 10.0 or 11.0. Check the build requirements." exit sub end if ' ' Ok, emit build config variables. ' if InStr(1, g_strShellOutput, "Version 16.") > 0 then CfgPrint "PATH_TOOL_VCC100 := " & g_strPathVCC CfgPrint "PATH_TOOL_VCC100X86 := $(PATH_TOOL_VCC100)" CfgPrint "PATH_TOOL_VCC100AMD64 := $(PATH_TOOL_VCC100)" if LogFileExists(strPathVC, "atlmfc/include/atlbase.h") then PrintResult "Visual C++ v10 with ATL", g_strPathVCC elseif LogFileExists(g_strPathDDK, "inc/atl71/atlbase.h") _ And LogFileExists(g_strPathDDK, "lib/ATL/i386/atls.lib") then CfgPrint "VBOX_WITHOUT_COMPILER_REDIST=1" CfgPrint "PATH_TOOL_VCC100_ATLMFC_INC = " & g_strPathDDK & "/inc/atl71" CfgPrint "PATH_TOOL_VCC100_ATLMFC_LIB.amd64 = " & g_strPathDDK & "/lib/ATL/amd64" CfgPrint "PATH_TOOL_VCC100_ATLMFC_LIB.x86 = " & g_strPathDDK & "/lib/ATL/i386" CfgPrint "PATH_TOOL_VCC100AMD64_ATLMFC_INC = " & g_strPathDDK & "/inc/atl71" CfgPrint "PATH_TOOL_VCC100AMD64_ATLMFC_LIB = " & g_strPathDDK & "/lib/ATL/amd64" CfgPrint "PATH_TOOL_VCC100X86_ATLMFC_INC = " & g_strPathDDK & "/inc/atl71" CfgPrint "PATH_TOOL_VCC100X86_ATLMFC_LIB = " & g_strPathDDK & "/lib/ATL/i386" PrintResult "Visual C++ v10 with DDK ATL", g_strPathVCC else CfgPrint "VBOX_WITHOUT_COMPILER_REDIST=1" DisableCOM "No ATL" PrintResult "Visual C++ v10 (or later) without ATL", g_strPathVCC end if elseif InStr(1, g_strShellOutput, "Version 17.") > 0 then CfgPrint "PATH_TOOL_VCC110 := " & g_strPathVCC CfgPrint "PATH_TOOL_VCC110X86 := $(PATH_TOOL_VCC110)" CfgPrint "PATH_TOOL_VCC110AMD64 := $(PATH_TOOL_VCC110)" PrintResult "Visual C++ v11", g_strPathVCC MsgWarning "The support for Visual C++ v11 (aka 2012) is experimental" else MsgError "The Visual C++ compiler we found ('" & strPathVC & "') isn't 10.0 or 11.0. Check the build requirements." exit sub end if ' and the env.bat path fix. if strPathVCCommon <> "" then EnvPrint "set PATH=%PATH%;" & strPathVCCommon & "/IDE;" end if end sub '' ' Checks if the specified path points to a usable PSDK. function CheckForVisualCPPSub(strPathVC, strPathVCCommon, blnOptVCExpressEdition) strPathVC = UnixSlashes(PathAbs(strPathVC)) CheckForVisualCPPSub = False LogPrint "trying: strPathVC=" & strPathVC & " strPathVCCommon=" & strPathVCCommon & " blnOptVCExpressEdition=" & blnOptVCExpressEdition if LogFileExists(strPathVC, "bin/cl.exe") _ And LogFileExists(strPathVC, "bin/link.exe") _ And LogFileExists(strPathVC, "include/string.h") _ And LogFileExists(strPathVC, "lib/libcmt.lib") _ And LogFileExists(strPathVC, "lib/msvcrt.lib") _ then if blnOptVCExpressEdition _ Or ( LogFileExists(strPathVC, "atlmfc/include/atlbase.h") _ And LogFileExists(strPathVC, "atlmfc/lib/atls.lib")) _ Or ( LogFileExists(g_strPathDDK, "inc/atl71/atlbase.h") _ And LogFileExists(g_strPathDDK, "lib/ATL/i386/atls.lib")) _ Then '' @todo figure out a way we can verify the version/build! CheckForVisualCPPSub = True end if end if end function '' ' Checks for a platform SDK that works with the compiler sub CheckForPlatformSDK(strOptSDK) dim strPathPSDK, str PrintHdr "Windows Platform SDK (recent)" strPathPSDK = "" ' Check the supplied argument first. str = strOptSDK if str <> "" then if CheckForPlatformSDKSub(str) then strPathPSDK = str end if ' The tools location (first). if strPathPSDK = "" And g_blnInternalFirst then str = g_strPathDev & "/win.x86/sdk/v7.1" if CheckForPlatformSDKSub(str) then strPathPSDK = str end if if strPathPSDK = "" And g_blnInternalFirst then str = g_strPathDev & "/win.x86/sdk/v8.0" if CheckForPlatformSDKSub(str) then strPathPSDK = str end if ' Look for it in the environment str = EnvGet("MSSdk") if strPathPSDK = "" And str <> "" then if CheckForPlatformSDKSub(str) then strPathPSDK = str end if str = EnvGet("Mstools") if strPathPSDK = "" And str <> "" then if CheckForPlatformSDKSub(str) then strPathPSDK = str end if ' Check if there is one installed with the compiler. if strPathPSDK = "" And str <> "" then str = g_strPathVCC & "/PlatformSDK" if CheckForPlatformSDKSub(str) then strPathPSDK = str end if ' Check the registry next (ASSUMES sorting). arrSubKeys = RegEnumSubKeysRSort("HKLM", "SOFTWARE\Microsoft\Microsoft SDKs\Windows") for each strSubKey in arrSubKeys str = RegGetString("HKLM\SOFTWARE\Microsoft\Microsoft SDKs\Windows\" & strSubKey & "\InstallationFolder") if strPathPSDK = "" And str <> "" then if CheckForPlatformSDKSub(str) then strPathPSDK = str end if Next arrSubKeys = RegEnumSubKeysRSort("HKCU", "SOFTWARE\Microsoft\Microsoft SDKs\Windows") for each strSubKey in arrSubKeys str = RegGetString("HKCU\SOFTWARE\Microsoft\Microsoft SDKs\Windows\" & strSubKey & "\InstallationFolder") if strPathPSDK = "" And str <> "" then if CheckForPlatformSDKSub(str) then strPathPSDK = str end if Next ' The tools location (post). if (strPathPSDK = "") And (g_blnInternalFirst = False) then str = g_strPathDev & "/win.x86/sdk/v7.1" if CheckForPlatformSDKSub(str) then strPathPSDK = str end if if (strPathPSDK = "") And (g_blnInternalFirst = False) then str = g_strPathDev & "/win.x86/sdk/v8.0" if CheckForPlatformSDKSub(str) then strPathPSDK = str end if ' Give up. if strPathPSDK = "" then MsgError "Cannot find a suitable Platform SDK. Check configure.log and the build requirements." exit sub end if ' ' Emit the config. ' strPathPSDK = UnixSlashes(PathAbs(strPathPSDK)) CfgPrint "PATH_SDK_WINPSDK" & g_strVerPSDK & " := " & strPathPSDK CfgPrint "VBOX_WINPSDK := WINPSDK" & g_strVerPSDK PrintResult "Windows Platform SDK (v" & g_strVerPSDK & ")", strPathPSDK g_strPathPSDK = strPathPSDK end sub '' ' Checks if the specified path points to a usable PSDK. function CheckForPlatformSDKSub(strPathPSDK) CheckForPlatformSDKSub = False LogPrint "trying: strPathPSDK=" & strPathPSDK if LogFileExists(strPathPSDK, "include/Windows.h") _ And LogFileExists(strPathPSDK, "lib/Kernel32.Lib") _ And LogFileExists(strPathPSDK, "lib/User32.Lib") _ And LogFileExists(strPathPSDK, "bin/rc.exe") _ And Shell("""" & DosSlashes(strPathPSDK & "/bin/rc.exe") & """" , True) <> 0 _ then if InStr(1, g_strShellOutput, "Resource Compiler Version 6.2.") > 0 then g_strVerPSDK = "80" CheckForPlatformSDKSub = True elseif InStr(1, g_strShellOutput, "Resource Compiler Version 6.1.") > 0 then g_strVerPSDK = "71" CheckForPlatformSDKSub = True end if end if end function '' ' Checks for a Windows 7 Driver Kit. sub CheckForWinDDK(strOptDDK) dim strPathDDK, str, strSubKeys PrintHdr "Windows DDK v7.1" ' ' Find the DDK. ' strPathDDK = "" ' The specified path. if strPathDDK = "" And strOptDDK <> "" then if CheckForWinDDKSub(strOptDDK, True) then strPathDDK = strOptDDK end if ' The tools location (first). if strPathDDK = "" And g_blnInternalFirst then str = g_strPathDev & "/win.x86/ddk/7600.16385.1" if CheckForWinDDKSub(str, False) then strPathDDK = str end if ' Check the environment str = EnvGet("DDK_INC_PATH") if strPathDDK = "" And str <> "" then str = PathParent(PathParent(str)) if CheckForWinDDKSub(str, True) then strPathDDK = str end if str = EnvGet("BASEDIR") if strPathDDK = "" And str <> "" then if CheckForWinDDKSub(str, True) then strPathDDK = str end if ' Some array constants to ease the work. arrSoftwareKeys = array("SOFTWARE", "SOFTWARE\Wow6432Node") arrRoots = array("HKLM", "HKCU") ' Windows 7 WDK. arrLocations = array() for each strSoftwareKey in arrSoftwareKeys for each strSubKey in RegEnumSubKeysFull("HKLM", strSoftwareKey & "\Microsoft\KitSetup\configured-kits") for each strSubKey2 in RegEnumSubKeysFull("HKLM", strSubKey) str = RegGetString("HKLM\" & strSubKey2 & "\setup-install-location") if str <> "" then arrLocations = ArrayAppend(arrLocations, PathAbsLong(str)) end if next next next arrLocations = ArrayRSortStrings(arrLocations) ' Check the locations we've gathered. for each str in arrLocations if strPathDDK = "" then if CheckForWinDDKSub(str, True) then strPathDDK = str end if next ' The tools location (post). if (strPathDDK = "") And (g_blnInternalFirst = False) then str = g_strPathDev & "/win.x86/ddk/7600.16385.1" if CheckForWinDDKSub(str, False) then strPathDDK = str end if ' Give up. if strPathDDK = "" then MsgError "Cannot find the Windows DDK v7.1. Check configure.log and the build requirements." exit sub end if ' ' Emit the config. ' strPathDDK = UnixSlashes(PathAbs(strPathDDK)) CfgPrint "PATH_SDK_WINDDK71 := " & strPathDDK PrintResult "Windows DDK v7.1", strPathDDK g_strPathDDK = strPathDDK end sub '' Quick check if the DDK is in the specified directory or not. function CheckForWinDDKSub(strPathDDK, blnCheckBuild) CheckForWinDDKSub = False LogPrint "trying: strPathDDK=" & strPathDDK & " blnCheckBuild=" & blnCheckBuild if LogFileExists(strPathDDK, "inc/api/ntdef.h") _ And LogFileExists(strPathDDK, "lib/win7/i386/int64.lib") _ And LogFileExists(strPathDDK, "lib/wlh/i386/int64.lib") _ And LogFileExists(strPathDDK, "lib/wnet/i386/int64.lib") _ And LogFileExists(strPathDDK, "lib/wxp/i386/int64.lib") _ And Not LogFileExists(strPathDDK, "lib/win8/i386/int64.lib") _ And LogFileExists(strPathDDK, "bin/x86/rc.exe") _ then if Not blnCheckBuild then CheckForWinDDKSub = True '' @todo Find better build check. elseif Shell("""" & DosSlashes(strPathDDK & "/bin/x86/rc.exe") & """" , True) <> 0 _ And InStr(1, g_strShellOutput, "Resource Compiler Version 6.1.") > 0 then CheckForWinDDKSub = True end if end if end function '' ' Finds midl.exe sub CheckForMidl() dim strMidl PrintHdr "Midl.exe" ' Skip if no COM/ATL. if g_blnDisableCOM then PrintResultMsg "Midl", "Skipped (" & g_strDisableCOM & ")" exit sub end if if LogFileExists(g_strPathPSDK, "bin/Midl.exe") then strMidl = g_strPathPSDK & "/bin/Midl.exe" elseif LogFileExists(g_strPathVCC, "Common7/Tools/Bin/Midl.exe") then strMidl = g_strPathVCC & "/Common7/Tools/Bin/Midl.exe" elseif LogFileExists(g_strPathDDK, "bin/x86/Midl.exe") then strMidl = g_strPathDDK & "/bin/x86/Midl.exe" elseif LogFileExists(g_strPathDDK, "bin/Midl.exe") then strMidl = g_strPathDDK & "/bin/Midl.exe" elseif LogFileExists(g_strPathDev, "win.x86/bin/Midl.exe") then strMidl = g_strPathDev & "/win.x86/bin/Midl.exe" else MsgWarning "Midl.exe not found!" exit sub end if CfgPrint "VBOX_MAIN_IDL := " & strMidl PrintResult "Midl.exe", strMidl end sub '' ' Checks for a MinGW32 suitable for building the recompiler. ' ' strOptW32API is currently ignored. ' sub CheckForMinGW32(strOptMinGW32, strOptW32API) dim strPathMingW32, strPathW32API, str PrintHdr "MinGW32 GCC v3.3.x + Binutils + Runtime + W32API" ' ' Find the MinGW and W32API tools. ' strPathMingW32 = "" strPathW32API = "" ' The specified path. if (strPathMingW32 = "") And (strOptMinGW32 <> "") then if CheckForMinGW32Sub(strOptMinGW32, strOptW32API) then strPathMingW32 = strOptMinGW32 strPathW32API = strOptW32API end if end if ' The tools location (first). if (strPathMingW32 = "") And (g_blnInternalFirst = True) then str = g_strPathDev & "/win.x86/mingw32/v3.3.3" str2 = g_strPathDev & "/win.x86/w32api/v2.5" if CheckForMinGW32Sub(str, str2) then strPathMingW32 = str strPathW32API = str2 end if end if ' See if there is any gcc around. if strPathMingW32 = "" then str = Which("mingw32-gcc.exe") if (str <> "") then str = PathParent(PathStripFilename(str)) if CheckForMinGW32Sub(str, str) then strPathMingW32 = str end if end if if strPathMingW32 = "" then str = Which("gcc.exe") if (str <> "") then str = PathParent(PathStripFilename(str)) if CheckForMinGW32Sub(str, str) then strPathMingW32 = str end if end if ' The tools location (post). if (strPathMingW32 = "") And (g_blnInternalFirst = False) then str = g_strPathDev & "/win.x86/mingw32/v3.3.3" str2 = g_strPathDev & "/win.x86/w32api/v2.5" if CheckForMinGW32Sub(str, str2) then strPathMingW32 = str strPathW32API = str2 end if end if ' Success? if strPathMingW32 = "" then if g_strTargetArch = "amd64" then MsgWarning "Can't locate a suitable MinGW32 installation, ignoring since we're targetting AMD64 and won't need it." elseif strOptMinGW32 = "" then MsgError "Can't locate a suitable MinGW32 installation. Try specify the path with " _ & "the --with-MinGW32= argument. If still no luck, consult the configure.log and the build requirements." else MsgError "Can't locate a suitable MinGW32 installation. Please consult the configure.log and the build requirements." end if exit sub end if ' ' Emit the config. ' strPathMingW32 = UnixSlashes(PathAbs(strPathMingW32)) CfgPrint "PATH_TOOL_MINGW32 := " & strPathMingW32 PrintResult "MinGW32 (GCC v" & g_strSubOutput & ")", strPathMingW32 if (strPathMingW32 = strPathW32API) Or strPathW32API = "" then CfgPrint "PATH_SDK_W32API := $(PATH_TOOL_MINGW32)" else CfgPrint "PATH_SDK_W32API := " & strPathW32API PrintResult "W32API", strPathW32API end if end sub '' ' Checks if the specified path points to an usable MinGW or not. function CheckForMinGW32Sub(strPathMingW32, strPathW32API) g_strSubOutput = "" if strPathW32API = "" then strPathW32API = strPathMingW32 LogPrint "trying: strPathMingW32=" &strPathMingW32 & " strPathW32API=" & strPathW32API if LogFileExists(strPathMingW32, "bin/mingw32-gcc.exe") _ And LogFileExists(strPathMingW32, "bin/ld.exe") _ And LogFileExists(strPathMingW32, "bin/objdump.exe") _ And LogFileExists(strPathMingW32, "bin/dllwrap.exe") _ And LogFileExists(strPathMingW32, "bin/as.exe") _ And LogFileExists(strPathMingW32, "include/string.h") _ And LogFileExists(strPathMingW32, "include/_mingw.h") _ And LogFileExists(strPathMingW32, "lib/dllcrt1.o") _ And LogFileExists(strPathMingW32, "lib/dllcrt2.o") _ And LogFileExists(strPathMingW32, "lib/libmsvcrt.a") _ _ And LogFileExists(strPathW32API, "lib/libkernel32.a") _ And LogFileExists(strPathW32API, "include/windows.h") _ then if Shell(DosSlashes(strPathMingW32 & "/bin/gcc.exe") & " --version", True) = 0 then dim offVer, iMajor, iMinor, iPatch, strVer ' extract the version. strVer = "" offVer = InStr(1, g_strShellOutput, "(GCC) ") if offVer > 0 then strVer = LTrim(Mid(g_strShellOutput, offVer + Len("(GCC) "))) strVer = RTrim(Left(strVer, InStr(1, strVer, " "))) if (Mid(strVer, 2, 1) = ".") _ And (Mid(strVer, 4, 1) = ".") then iMajor = Int(Left(strVer, 1)) ' Is Int() the right thing here? I want atoi()!!! iMinor = Int(Mid(strVer, 3, 1)) iPatch = Int(Mid(strVer, 5)) else LogPrint "Malformed version: '" & strVer & "'" strVer = "" end if end if if strVer <> "" then if (iMajor = 3) And (iMinor = 3) then CheckForMinGW32Sub = True g_strSubOutput = strVer else LogPrint "MinGW32 version '" & iMajor & "." & iMinor & "." & iPatch & "' is not supported (or configure.vbs failed to parse it correctly)." end if else LogPrint "Couldn't locate the GCC version in the output!" end if else LogPrint "Failed to run gcc.exe!" end if end if end function '' ' Checks for a MinGW-w64 suitable for building the recompiler. ' sub CheckForMinGWw64(strOptMinGWw64) dim strPathMingWw64, str PrintHdr "MinGW-w64 GCC (unprefixed)" ' ' Find the MinGW-w64 tools. ' strPathMingWw64 = "" ' The specified path. if (strPathMingWw64 = "") And (strOptMinGWw64 <> "") then if CheckForMinGWw64Sub(strOptMinGWw64) then strPathMingWw64 = strOptMinGWw64 end if end if ' The tools location (first). if (strPathMinGWw64 = "") And (g_blnInternalFirst = True) then str = g_strPathDev & "/win.amd64/mingw-w64/r1" if CheckForMinGWw64Sub(str) then strPathMinGWw64 = str end if end if ' See if there is any gcc around. if strPathMinGWw64 = "" then str = Which("x86_64-w64-mingw32-gcc.exe") if (str <> "") then str = PathParent(PathStripFilename(str)) if CheckForMinGWw64Sub(str) then strPathMinGWw64 = str end if end if if strPathMinGWw64 = "" then str = Which("gcc.exe") if (str <> "") then str = PathParent(PathStripFilename(str)) if CheckForMinGWw64Sub(str) then strPathMinGWw64 = str end if end if ' The tools location (post). if (strPathMinGWw64 = "") And (g_blnInternalFirst = False) then str = g_strPathDev & "/win.amd64/mingw-w64/r1" if CheckForMinGWw64Sub(str) then strPathMinGWw64 = str end if end if ' Success? if strPathMinGWw64 = "" then if g_strTargetArch = "x86" then MsgWarning "Can't locate a suitable MinGW-w64 installation, ignoring since we're targetting x86 and won't need it." elseif strOptMinGWw64 = "" then MsgError "Can't locate a suitable MinGW-w64 installation. Try specify the path with " _ & "the --with-MinGW-w64= argument. If still no luck, consult the configure.log and the build requirements." else MsgError "Can't locate a suitable MinGW-w64 installation. Please consult the configure.log and the build requirements." end if exit sub end if ' ' Emit the config. ' strPathMinGWw64 = UnixSlashes(PathAbs(strPathMinGWw64)) CfgPrint "PATH_TOOL_MINGWW64 := " & strPathMinGWw64 PrintResult "MinGW-w64 (GCC v" & g_strSubOutput & ")", strPathMinGWw64 end sub '' ' Checks if the specified path points to an usable MinGW-w64 or not. function CheckForMinGWw64Sub(strPathMinGWw64) g_strSubOutput = "" LogPrint "trying: strPathMinGWw64=" &strPathMinGWw64 if LogFileExists(strPathMinGWw64, "bin/gcc.exe") _ And LogFileExists(strPathMinGWw64, "bin/ld.exe") _ And LogFileExists(strPathMinGWw64, "bin/objdump.exe") _ And LogFileExists(strPathMinGWw64, "bin/dllwrap.exe") _ And LogFileExists(strPathMinGWw64, "bin/dlltool.exe") _ And LogFileExists(strPathMinGWw64, "bin/as.exe") _ And LogFileExists(strPathMinGWw64, "include/bfd.h") _ And LogFileExists(strPathMinGWw64, "lib64/libgcc_s.a") _ And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/lib/dllcrt1.o") _ And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/lib/dllcrt2.o") _ And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/lib/libmsvcrt.a") _ And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/lib/libmsvcr100.a") _ And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/include/_mingw.h") _ And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/include/stdint.h") _ And LogFileExists(strPathMinGWw64, "x86_64-w64-mingw32/include/windows.h") _ then if Shell(DosSlashes(strPathMinGWw64 & "/bin/gcc.exe") & " -dumpversion", True) = 0 then dim offVer, iMajor, iMinor, iPatch, strVer ' extract the version. strVer = Trim(Replace(Replace(g_strShellOutput, vbCr, ""), vbLf, "")) if (Mid(strVer, 2, 1) = ".") _ And (Mid(strVer, 4, 1) = ".") then iMajor = Int(Left(strVer, 1)) ' Is Int() the right thing here? I want atoi()!!! iMinor = Int(Mid(strVer, 3, 1)) iPatch = Int(Mid(strVer, 5)) else LogPrint "Malformed version: '" & strVer & "'" strVer = "" end if if strVer <> "" then if (iMajor = 4) And (iMinor >= 4) then CheckForMinGWw64Sub = True g_strSubOutput = strVer else LogPrint "MinGW-w64 version '" & iMajor & "." & iMinor & "." & iPatch & "' is not supported (or configure.vbs failed to parse it correctly)." end if else LogPrint "Couldn't locate the GCC version in the output!" end if else LogPrint "Failed to run gcc.exe!" end if end if end function '' ' Checks for any libSDL binaries. sub CheckForlibSDL(strOptlibSDL) dim strPathlibSDL, str PrintHdr "libSDL" ' ' Try find some SDL library. ' ' First, the specific location. strPathlibSDL = "" if (strPathlibSDL = "") And (strOptlibSDL <> "") then if CheckForlibSDLSub(strOptlibSDL) then strPathlibSDL = strOptlibSDL end if ' The tools location (first). if (strPathlibSDL = "") And (g_blnInternalFirst = True) Then str = g_strPathDev & "/win.x86/libsdl/v1.2.11" if CheckForlibSDLSub(str) then strPathlibSDL = str end if if (strPathlibSDL = "") And (g_blnInternalFirst = True) Then str = g_strPathDev & "/win.x86/libsdl/v1.2.7-InnoTek" if CheckForlibSDLSub(str) then strPathlibSDL = str end if ' Poke about in the path. str = Which("SDLmain.lib") if (strPathlibSDL = "") And (str <> "") Then str = PathParent(PathStripFilename(str)) if CheckForlibSDLSub(str) then strPathlibSDL = str end if str = Which("SDL.dll") if (strPathlibSDL = "") And (str <> "") Then str = PathParent(PathStripFilename(str)) if CheckForlibSDLSub(str) then strPathlibSDL = str end if ' The tools location (post). if (strPathlibSDL = "") And (g_blnInternalFirst = False) Then str = g_strPathDev & "/win.x86/libsdl/v1.2.11" if CheckForlibSDLSub(str) then strPathlibSDL = str end if if (strPathlibSDL = "") And (g_blnInternalFirst = False) Then str = g_strPathDev & "/win.x86/libsdl/v1.2.7-InnoTek" if CheckForlibSDLSub(str) then strPathlibSDL = str end if ' Success? if strPathlibSDL = "" then if strOptlibSDL = "" then MsgError "Can't locate libSDL. Try specify the path with the --with-libSDL= argument. " _ & "If still no luck, consult the configure.log and the build requirements." else MsgError "Can't locate libSDL. Please consult the configure.log and the build requirements." end if exit sub end if strPathLibSDL = UnixSlashes(PathAbs(strPathLibSDL)) CfgPrint "PATH_SDK_LIBSDL := " & strPathlibSDL PrintResult "libSDL", strPathlibSDL end sub '' ' Checks if the specified path points to an usable libSDL or not. function CheckForlibSDLSub(strPathlibSDL) CheckForlibSDLSub = False LogPrint "trying: strPathlibSDL=" & strPathlibSDL if LogFileExists(strPathlibSDL, "lib/SDL.lib") _ And LogFileExists(strPathlibSDL, "lib/SDLmain.lib") _ And LogFileExists(strPathlibSDL, "lib/SDL.dll") _ And LogFileExists(strPathlibSDL, "include/SDL.h") _ And LogFileExists(strPathlibSDL, "include/SDL_syswm.h") _ And LogFileExists(strPathlibSDL, "include/SDL_version.h") _ then CheckForlibSDLSub = True end if end function '' ' Checks for libxml2. sub CheckForXml2(strOptXml2) dim strPathXml2, str PrintHdr "libxml2" ' Skip if no COM/ATL. if g_blnDisableCOM then PrintResultMsg "libxml2", "Skipped (" & g_strDisableCOM & ")" exit sub end if ' ' Try find some xml2 dll/lib. ' strPathXml2 = "" if (strPathXml2 = "") And (strOptXml2 <> "") then if CheckForXml2Sub(strOptXml2) then strPathXml2 = strOptXml2 end if if strPathXml2 = "" Then str = Which("libxml2.lib") if str <> "" Then str = PathParent(PathStripFilename(str)) if CheckForXml2Sub(str) then strPathXml2 = str end if end if ' Ignore failure if we're in 'internal' mode. if (strPathXml2 = "") and g_blnInternalMode then PrintResultMsg "libxml2", "ignored (internal mode)" exit sub end if ' Success? if strPathXml2 = "" then if strOptXml2 = "" then MsgError "Can't locate libxml2. Try specify the path with the --with-libxml2= argument. " _ & "If still no luck, consult the configure.log and the build requirements." else MsgError "Can't locate libxml2. Please consult the configure.log and the build requirements." end if exit sub end if strPathXml2 = UnixSlashes(PathAbs(strPathXml2)) CfgPrint "SDK_VBOX_LIBXML2_INCS := " & strPathXml2 & "/include" CfgPrint "SDK_VBOX_LIBXML2_LIBS := " & strPathXml2 & "/lib/libxml2.lib" PrintResult "libxml2", strPathXml2 end sub '' ' Checks if the specified path points to an usable libxml2 or not. function CheckForXml2Sub(strPathXml2) dim str CheckForXml2Sub = False LogPrint "trying: strPathXml2=" & strPathXml2 if LogFileExists(strPathXml2, "include/libxml/xmlexports.h") _ And LogFileExists(strPathXml2, "include/libxml/xmlreader.h") _ then str = LogFindFile(strPathXml2, "bin/libxml2.dll") if str <> "" then if LogFindFile(strPathXml2, "lib/libxml2.lib") <> "" then CheckForXml2Sub = True end if end if end if end function '' ' Checks for libxslt. sub CheckForXslt(strOptXslt) dim strPathXslt, str PrintHdr "libxslt" ' Skip if no COM/ATL. if g_blnDisableCOM then PrintResultMsg "libxslt", "Skipped (" & g_strDisableCOM & ")" exit sub end if ' ' Try find some libxslt dll/lib. ' strPathXslt = "" if (strPathXslt = "") And (strOptXslt <> "") then if CheckForXsltSub(strOptXslt) then strPathXslt = strOptXslt end if if strPathXslt = "" Then str = Which("libxslt.lib") if str <> "" Then str = PathParent(PathStripFilename(str)) if CheckForXsltSub(str) then strPathXslt = str end if end if if strPathXslt = "" Then str = Which("libxslt.dll") if str <> "" Then str = PathParent(PathStripFilename(str)) if CheckForXsltSub(str) then strPathXslt = str end if end if ' Ignore failure if we're in 'internal' mode. if (strPathXslt = "") and g_blnInternalMode then PrintResultMsg "libxslt", "ignored (internal mode)" exit sub end if ' Success? if strPathXslt = "" then if strOptXslt = "" then MsgError "Can't locate libxslt. Try specify the path with the --with-libxslt= argument. " _ & "If still no luck, consult the configure.log and the build requirements." else MsgError "Can't locate libxslt. Please consult the configure.log and the build requirements." end if exit sub end if strPathXslt = UnixSlashes(PathAbs(strPathXslt)) CfgPrint "SDK_VBOX_LIBXSLT_INCS := " & strPathXslt & "/include" CfgPrint "SDK_VBOX_LIBXSLT_LIBS := " & strPathXslt & "/lib/libxslt.lib" PrintResult "libxslt", strPathXslt end sub '' ' Checks if the specified path points to an usable libxslt or not. function CheckForXsltSub(strPathXslt) dim str CheckForXsltSub = False LogPrint "trying: strPathXslt=" & strPathXslt if LogFileExists(strPathXslt, "include/libxslt/namespaces.h") _ And LogFileExists(strPathXslt, "include/libxslt/xsltutils.h") _ then str = LogFindFile(strPathXslt, "lib/libxslt.dll") if str <> "" then if LogFileExists(strPathXslt, "lib/libxslt.lib") _ then CheckForXsltSub = True end if end if end if end function '' ' Checks for openssl sub CheckForSsl(strOptSsl) dim strPathSsl, str PrintHdr "openssl" ' ' Try find some openssl dll/lib. ' strPathSsl = "" if (strPathSsl = "") And (strOptSsl <> "") then if CheckForSslSub(strOptSsl) then strPathSsl = strOptSsl end if if strPathSsl = "" Then str = Which("ssleay32.lib") if str <> "" Then str = PathParent(PathStripFilename(str)) if CheckForSslSub(str) then strPathSsl = str end if end if ' Ignore failure if we're in 'internal' mode. if (strPathSsl = "") and g_blnInternalMode then PrintResultMsg "openssl", "ignored (internal mode)" exit sub end if ' Success? if strPathSsl = "" then if strOptSsl = "" then MsgError "Can't locate openssl. Try specify the path with the --with-openssl= argument. " _ & "If still no luck, consult the configure.log and the build requirements." else MsgError "Can't locate openssl. Please consult the configure.log and the build requirements." end if exit sub end if strPathSsl = UnixSlashes(PathAbs(strPathSsl)) CfgPrint "SDK_VBOX_OPENSSL_INCS := " & strPathSsl & "/include" CfgPrint "SDK_VBOX_OPENSSL_LIBS := " & strPathSsl & "/lib/ssleay32.lib" & " " & strPathSsl & "/lib/libeay32.lib" CfgPrint "SDK_VBOX_BLD_OPENSSL_LIBS := " & strPathSsl & "/lib/ssleay32.lib" & " " & strPathSsl & "/lib/libeay32.lib" PrintResult "openssl", strPathSsl end sub '' ' Checks if the specified path points to an usable openssl or not. function CheckForSslSub(strPathSsl) CheckForSslSub = False LogPrint "trying: strPathSsl=" & strPathSsl if LogFileExists(strPathSsl, "include/openssl/md5.h") _ And LogFindFile(strPathSsl, "bin/ssleay32.dll") <> "" _ And LogFindFile(strPathSsl, "lib/ssleay32.lib") <> "" _ And LogFindFile(strPathSsl, "bin/libeay32.dll") <> "" _ And LogFindFile(strPathSsl, "lib/libeay32.lib") <> "" _ then CheckForSslSub = True end if end function '' ' Checks for libcurl sub CheckForCurl(strOptCurl) dim strPathCurl, str PrintHdr "libcurl" ' ' Try find some cURL dll/lib. ' strPathCurl = "" if (strPathCurl = "") And (strOptCurl <> "") then if CheckForCurlSub(strOptCurl) then strPathCurl = strOptCurl end if if strPathCurl = "" Then str = Which("libcurl.lib") if str <> "" Then str = PathParent(PathStripFilename(str)) if CheckForCurlSub(str) then strPathCurl = str end if end if ' Ignore failure if we're in 'internal' mode. if (strPathCurl = "") and g_blnInternalMode then PrintResultMsg "curl", "ignored (internal mode)" exit sub end if ' Success? if strPathCurl = "" then if strOptCurl = "" then MsgError "Can't locate libcurl. Try specify the path with the --with-libcurl= argument. " _ & "If still no luck, consult the configure.log and the build requirements." else MsgError "Can't locate libcurl. Please consult the configure.log and the build requirements." end if exit sub end if strPathCurl = UnixSlashes(PathAbs(strPathCurl)) CfgPrint "SDK_VBOX_LIBCURL_INCS := " & strPathCurl & "/include" CfgPrint "SDK_VBOX_LIBCURL_LIBS := " & strPathCurl & "/libcurl.lib" PrintResult "libcurl", strPathCurl end sub '' ' Checks if the specified path points to an usable libcurl or not. function CheckForCurlSub(strPathCurl) CheckForCurlSub = False LogPrint "trying: strPathCurl=" & strPathCurl if LogFileExists(strPathCurl, "include/curl/curl.h") _ And LogFindFile(strPathCurl, "libcurl.dll") <> "" _ And LogFindFile(strPathCurl, "libcurl.lib") <> "" _ then CheckForCurlSub = True end if end function '' ' Checks for any Qt4 binaries. sub CheckForQt4(strOptQt4) dim strPathQt4 PrintHdr "Qt4" ' ' Try to find the Qt4 installation (user specified path with --with-qt4) ' strPathQt4 = "" LogPrint "Checking for user specified path of Qt4 ... " if (strPathQt4 = "") And (strOptQt4 <> "") then strOptQt4 = UnixSlashes(strOptQt4) if CheckForQt4Sub(strOptQt4) then strPathQt4 = strOptQt4 end if ' Check the dev tools if (strPathQt4 = "") Then strPathQt4 = g_strPathDev & "/win." & g_strTargetArch & "/qt/v4.7.3-vcc100" if CheckForQt4Sub(strPathQt4) = False then strPathQt4 = "" end if ' Display the result. if strPathQt4 = "" then CfgPrint "VBOX_WITH_QT4GUI=" PrintResultMsg "Qt4", "not found" else CfgPrint "PATH_SDK_QT4 := " & strPathQt4 CfgPrint "PATH_TOOL_QT4 := $(PATH_SDK_QT4)" CfgPrint "VBOX_PATH_QT4 := $(PATH_SDK_QT4)" PrintResult "Qt4 ", strPathQt4 end if end sub '' ' Checks if the specified path points to an usable Qt library. function CheckForQt4Sub(strPathQt4) CheckForQt4Sub = False LogPrint "trying: strPathQt4=" & strPathQt4 if LogFileExists(strPathQt4, "bin/moc.exe") _ And LogFileExists(strPathQt4, "bin/uic.exe") _ And LogFileExists(strPathQt4, "include/Qt/qwidget.h") _ And LogFileExists(strPathQt4, "include/QtGui/QApplication") _ And LogFileExists(strPathQt4, "include/QtNetwork/QHostAddress") _ And ( LogFileExists(strPathQt4, "lib/QtCore4.lib") _ Or LogFileExists(strPathQt4, "lib/VBoxQtCore4.lib") _ Or LogFileExists(strPathQt4, "lib/QtCoreVBox4.lib")) _ And ( LogFileExists(strPathQt4, "lib/QtNetwork4.lib") _ Or LogFileExists(strPathQt4, "lib/VBoxQtNetwork4.lib") _ Or LogFileExists(strPathQt4, "lib/QtNetworkVBox4.lib")) _ then CheckForQt4Sub = True end if end function ' ' function CheckForPython(strPathPython) PrintHdr "Python" CheckForPython = False LogPrint "trying: strPathPython=" & strPathPython if LogFileExists(strPathPython, "python.exe") then CfgPrint "VBOX_BLD_PYTHON := " & strPathPython & "\python.exe" CheckForPython = True end if PrintResult "Python ", strPathPython end function ' ' function CheckForMkisofs(strFnameMkisofs) PrintHdr "mkisofs" CheckForMkisofs = False LogPrint "trying: strFnameMkisofs=" & strFnameMkisofs if FileExists(strFnameMkisofs) = false then LogPrint "Testing '" & strFnameMkisofs & " not found" else CfgPrint "VBOX_MKISOFS := " & strFnameMkisofs CheckForMkisofs = True end if PrintResult "mkisofs ", strFnameMkisofs end function '' ' Show usage. sub usage Print "Usage: cscript configure.vbs [options]" Print "" Print "Configuration:" Print " -h, --help" Print " --internal" Print " --internal-last" Print "" Print "Components:" Print " --disable-COM" Print " --disable-UDPTunnel" Print "" Print "Locations:" Print " --with-DDK=PATH " Print " --with-DXSDK=PATH " Print " --with-kBuild=PATH " Print " --with-libSDL=PATH " Print " --with-MinGW32=PATH " Print " --with-MinGW-w64=PATH " Print " --with-Qt4=PATH " Print " --with-SDK=PATH " Print " --with-VC=PATH " Print " --with-VC-Common=PATH " Print " --with-VC-Express-Edition" Print " --with-W32API=PATH " Print " --with-libxml2=PATH " Print " --with-libxslt=PATH " Print " --with-openssl=PATH " Print " --with-libcurl=PATH " Print " --with-python=PATH " end sub '' ' The main() like function. ' Sub Main ' ' Write the log header and check that we're not using wscript. ' LogInit If UCase(Right(Wscript.FullName, 11)) = "WSCRIPT.EXE" Then Wscript.Echo "This script must be run under CScript." Wscript.Quit(1) End If ' ' Parse arguments. ' strOptDDK = "" strOptDXDDK = "" strOptkBuild = "" strOptlibSDL = "" strOptMinGW32 = "" strOptMinGWw64 = "" strOptQt4 = "" strOptSDK = "" strOptVC = "" strOptVCCommon = "" blnOptVCExpressEdition = False strOptW32API = "" strOptXml2 = "" strOptXslt = "" strOptSsl = "" strOptCurl = "" strOptPython = "" strOptMkisofs = "" blnOptDisableCOM = False blnOptDisableUDPTunnel = False for i = 1 to Wscript.Arguments.Count dim str, strArg, strPath ' Separate argument and path value str = Wscript.Arguments.item(i - 1) if InStr(1, str, "=") > 0 then strArg = Mid(str, 1, InStr(1, str, "=") - 1) strPath = Mid(str, InStr(1, str, "=") + 1) if strPath = "" then MsgFatal "Syntax error! Argument #" & i & " is missing the path." else strArg = str strPath = "" end if ' Process the argument select case LCase(strArg) case "--with-ddk" strOptDDK = strPath case "--with-dxsdk" MsgWarning "Ignornig --with-dxsdk (the DirectX SDK is no longer required)." case "--with-kbuild" strOptkBuild = strPath case "--with-libsdl" strOptlibSDL = strPath case "--with-mingw32" strOptMinGW32 = strPath case "--with-mingw-w64" strOptMinGWw64 = strPath case "--with-qt4" strOptQt4 = strPath case "--with-sdk" strOptSDK = strPath case "--with-vc" strOptVC = strPath case "--with-vc-common" strOptVCCommon = strPath case "--with-vc-express-edition" blnOptVCExpressEdition = True case "--with-w32api" strOptW32API = strPath case "--with-libxml2" strOptXml2 = strPath case "--with-libxslt" strOptXslt = strPath case "--with-openssl" strOptSsl = strPath case "--with-libcurl" strOptCurl = strPath case "--with-python" strOptPython = strPath case "--with-mkisofs" strOptMkisofs = strPath case "--disable-com" blnOptDisableCOM = True case "--enable-com" blnOptDisableCOM = False case "--disable-udptunnel" blnOptDisableUDPTunnel = True case "--internal" g_blnInternalMode = True case "--internal-last" g_blnInternalFirst = False case "-h", "--help", "-?" usage Wscript.Quit(0) case else Wscript.echo "syntax error: Unknown option '" & str &"'." usage Wscript.Quit(1) end select next ' ' Initialize output files. ' CfgInit EnvInit ' ' Check that the Shell function is sane. ' g_objShell.Environment("PROCESS")("TESTING_ENVIRONMENT_INHERITANCE") = "This works" if Shell("set TESTING_ENVIRONMENT_INHERITANC", False) <> 0 then ' The 'E' is missing on purpose (4nt). MsgFatal "shell execution test failed!" end if if g_strShellOutput <> "TESTING_ENVIRONMENT_INHERITANCE=This works" & CHR(13) & CHR(10) then Print "Shell test Test -> '" & g_strShellOutput & "'" MsgFatal "shell inheritance or shell execution isn't working right. Make sure you use cmd.exe." end if g_objShell.Environment("PROCESS")("TESTING_ENVIRONMENT_INHERITANCE") = "" Print "Shell inheritance test: OK" ' ' Do the checks. ' if blnOptDisableCOM = True then DisableCOM "--disable-com" end if if blnOptDisableUDPTunnel = True then DisableUDPTunnel "--disable-udptunnel" end if CheckSourcePath CheckForkBuild strOptkBuild CheckForWinDDK strOptDDK CfgPrint "VBOX_WITH_WDDM_W8 := " '' @todo look for WinDDKv8; Check with Misha if we _really_ need the v8 DDK... CheckForVisualCPP strOptVC, strOptVCCommon, blnOptVCExpressEdition CheckForPlatformSDK strOptSDK CheckForMidl CheckForMinGW32 strOptMinGW32, strOptW32API CheckForMinGWw64 strOptMinGWw64 CfgPrint "VBOX_WITH_OPEN_WATCOM := " '' @todo look for openwatcom 1.9+ EnvPrint "set PATH=%PATH%;" & g_strPath& "/tools/win." & g_strTargetArch & "/bin;" '' @todo look for yasm CheckForlibSDL strOptlibSDL ' Don't check for these libraries by default as they are part of OSE ' Using external libs can add a dependency to iconv if (strOptXml2 <> "") then CheckForXml2 strOptXml2 end if if (strOptXslt <> "") then CheckForXslt strOptXslt end if CheckForSsl strOptSsl CheckForCurl strOptCurl CheckForQt4 strOptQt4 if (strOptPython <> "") then CheckForPython strOptPython end if if (strOptMkisofs <> "") then CheckForMkisofs strOptMkisofs end if if g_blnInternalMode then EnvPrint "call " & g_strPathDev & "/env.cmd %1 %2 %3 %4 %5 %6 %7 %8 %9" end if Print "" Print "Execute env.bat once before you start to build VBox:" Print "" Print " env.bat" Print " kmk" Print "" End Sub Main