[DEFAULT] use_syslog = True # # Options defined in oslo.messaging # # ZeroMQ bind address. Should be a wildcard (*), an ethernet # interface, or IP. The "host" option should point or resolve # to this address. (string value) #rpc_zmq_bind_address=* # MatchMaker driver. (string value) #rpc_zmq_matchmaker=local # ZeroMQ receiver listening port. (integer value) #rpc_zmq_port=9501 # Number of ZeroMQ contexts, defaults to 1. (integer value) #rpc_zmq_contexts=1 # Maximum number of ingress messages to locally buffer per # topic. Default is unlimited. (integer value) #rpc_zmq_topic_backlog= # Directory for holding IPC sockets. (string value) #rpc_zmq_ipc_dir=/var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP # address. Must match "host" option, if running Nova. (string # value) #rpc_zmq_host=cinder # Seconds to wait before a cast expires (TTL). Only supported # by impl_zmq. (integer value) #rpc_cast_timeout=30 # Heartbeat frequency. (integer value) #matchmaker_heartbeat_freq=300 # Heartbeat time-to-live. (integer value) #matchmaker_heartbeat_ttl=600 # Size of RPC thread pool. (integer value) #rpc_thread_pool_size=64 # Driver or drivers to handle sending notifications. (multi # valued) notification_driver=messagingv2 # AMQP topic used for OpenStack notifications. (list value) # Deprecated group/name - [rpc_notifier2]/topics #notification_topics=notifications # Seconds to wait for a response from a call. (integer value) #rpc_response_timeout=60 # A URL representing the messaging driver to use and its full # configuration. If not set, we fall back to the rpc_backend # option and driver specific configuration. (string value) #transport_url= # The messaging driver to use, defaults to rabbit. Other # drivers include qpid and zmq. (string value) rpc_backend=rabbit # The default exchange under which topics are scoped. May be # overridden by an exchange name specified in the # transport_url option. (string value) control_exchange=cinder # # Options defined in cinder.exception # # Make exception message format errors fatal. (boolean value) #fatal_exception_format_errors=false # # Options defined in cinder.quota # # Number of volumes allowed per project (integer value) #quota_volumes=10 # Number of volume snapshots allowed per project (integer # value) #quota_snapshots=10 # Number of consistencygroups allowed per project (integer # value) #quota_consistencygroups=10 # Total amount of storage, in gigabytes, allowed for volumes # and snapshots per project (integer value) #quota_gigabytes=1000 # Number of volume backups allowed per project (integer value) #quota_backups=10 # Total amount of storage, in gigabytes, allowed for backups # per project (integer value) #quota_backup_gigabytes=1000 # Number of seconds until a reservation expires (integer # value) #reservation_expire=86400 # Count of reservations until usage is refreshed (integer # value) #until_refresh=0 # Number of seconds between subsequent usage refreshes # (integer value) #max_age=0 # Default driver to use for quota checks (string value) #quota_driver=cinder.quota.DbQuotaDriver # Enables or disables use of default quota class with default # quota. (boolean value) #use_default_quota_class=true # # Options defined in cinder.service # # Interval, in seconds, between nodes reporting state to # datastore (integer value) #report_interval=10 # Interval, in seconds, between running periodic tasks # (integer value) #periodic_interval=60 # Range, in seconds, to randomly delay when starting the # periodic task scheduler to reduce stampeding. (Disable by # setting to 0) (integer value) #periodic_fuzzy_delay=60 # IP address on which OpenStack Volume API listens (string # value) #osapi_volume_listen=0.0.0.0 # Port on which OpenStack Volume API listens (integer value) #osapi_volume_listen_port=8776 # Number of workers for OpenStack Volume API service. The # default is equal to the number of CPUs available. (integer # value) #osapi_volume_workers= # # Options defined in cinder.ssh_utils # # Option to enable strict host key checking. When set to # "True" Cinder will only connect to systems with a host key # present in the configured "ssh_hosts_key_file". When set to # "False" the host key will be saved upon first connection and # used for subsequent connections. Default=False (boolean # value) #strict_ssh_host_key_policy=false # File containing SSH host keys for the systems with which # Cinder needs to communicate. OPTIONAL: # Default=$state_path/ssh_known_hosts (string value) #ssh_hosts_key_file=$state_path/ssh_known_hosts # # Options defined in cinder.test # # File name of clean sqlite db (string value) #sqlite_clean_db=clean.sqlite # # Options defined in cinder.wsgi # # Maximum line size of message headers to be accepted. # max_header_line may need to be increased when using large # tokens (typically those generated by the Keystone v3 API # with big service catalogs). (integer value) #max_header_line=16384 # Timeout for client connections' socket operations. If an # incoming connection is idle for this number of seconds it # will be closed. A value of '0' means wait forever. (integer # value) #client_socket_timeout=900 # If False, closes the client socket connection explicitly. # Setting it to True to maintain backward compatibility. # Recommended setting is set it to False. (boolean value) #wsgi_keep_alive=true # Sets the value of TCP_KEEPALIVE (True/False) for each server # socket. (boolean value) #tcp_keepalive=true # Sets the value of TCP_KEEPIDLE in seconds for each server # socket. Not supported on OS X. (integer value) #tcp_keepidle=600 # Sets the value of TCP_KEEPINTVL in seconds for each server # socket. Not supported on OS X. (integer value) #tcp_keepalive_interval= # Sets the value of TCP_KEEPCNT for each server socket. Not # supported on OS X. (integer value) #tcp_keepalive_count= # CA certificate file to use to verify connecting clients # (string value) #ssl_ca_file= # Certificate file to use when starting the server securely # (string value) #ssl_cert_file= # Private key file to use when starting the server securely # (string value) #ssl_key_file= # # Options defined in cinder.api.common # # The maximum number of items that a collection resource # returns in a single response (integer value) #osapi_max_limit=1000 # Base URL that will be presented to users in links to the # OpenStack Volume API (string value) # Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix #osapi_volume_base_URL= # # Options defined in cinder.api.middleware.auth # # Treat X-Forwarded-For as the canonical remote address. Only # enable this if you have a sanitizing proxy. (boolean value) #use_forwarded_for=false # # Options defined in cinder.api.middleware.sizelimit # # Max size for body of a request (integer value) #osapi_max_request_body_size=114688 # # Options defined in cinder.api.views.versions # # Public url to use for versions endpoint. The default is # None, which will use the request's host_url attribute to # populate the URL base. If Cinder is operating behind a # proxy, you will want to change this to represent the proxy's # URL. (string value) #public_endpoint= # # Options defined in cinder.backup.chunkeddriver # # Compression algorithm (None to disable) (string value) #backup_compression_algorithm=zlib # # Options defined in cinder.backup.driver # # Backup metadata version to be used when backing up volume # metadata. If this number is bumped, make sure the service # doing the restore supports the new version. (integer value) #backup_metadata_version=2 # The number of chunks or objects, for which one Ceilometer # notification will be sent (integer value) #backup_object_number_per_notification=10 # Interval, in seconds, between two progress notifications # reporting the backup status (integer value) #backup_timer_interval=120 # # Options defined in cinder.backup.drivers.ceph # # Ceph configuration file to use. (string value) #backup_ceph_conf=/etc/ceph/ceph.conf # The Ceph user to connect with. Default here is to use the # same user as for Cinder volumes. If not using cephx this # should be set to None. (string value) #backup_ceph_user=cinder # The chunk size, in bytes, that a backup is broken into # before transfer to the Ceph object store. (integer value) #backup_ceph_chunk_size=134217728 # The Ceph pool where volume backups are stored. (string # value) #backup_ceph_pool=backups # RBD stripe unit to use when creating a backup image. # (integer value) #backup_ceph_stripe_unit=0 # RBD stripe count to use when creating a backup image. # (integer value) #backup_ceph_stripe_count=0 # If True, always discard excess bytes when restoring volumes # i.e. pad with zeroes. (boolean value) #restore_discard_excess_bytes=true # # Options defined in cinder.backup.drivers.nfs # # The maximum size in bytes of the files used to hold backups. # If the volume being backed up exceeds this size, then it # will be backed up into multiple files. (integer value) #backup_file_size=1999994880 # The size in bytes that changes are tracked for incremental # backups. backup_swift_object_size has to be multiple of # backup_swift_block_size. (integer value) #backup_sha_block_size_bytes=32768 # Enable or Disable the timer to send the periodic progress # notifications to Ceilometer when backing up the volume to # the backend storage. The default value is True to enable the # timer. (boolean value) #backup_enable_progress_timer=true # Base dir containing mount point for NFS share. (string # value) #backup_mount_point_base=$state_path/backup_mount # NFS share in fqdn:path, ipv4addr:path, or "[ipv6addr]:path" # format. (string value) #backup_share= # Mount options passed to the NFS client. See NFS man page for # details. (string value) #backup_mount_options= # Custom container to use for backups. (string value) #backup_container= # # Options defined in cinder.backup.drivers.swift # # The URL of the Swift endpoint (string value) #backup_swift_url= # Info to match when looking for swift in the service catalog. # Format is: separated values of the form: # :: - Only used if # backup_swift_url is unset (string value) #swift_catalog_info=object-store:swift:publicURL # Swift authentication mechanism (string value) #backup_swift_auth=per_user # Swift authentication version. Specify "1" for auth 1.0, or # "2" for auth 2.0 (string value) #backup_swift_auth_version=1 # Swift tenant/account name. Required when connecting to an # auth 2.0 system (string value) #backup_swift_tenant= # Swift user name (string value) #backup_swift_user= # Swift key for authentication (string value) #backup_swift_key= # The default Swift container to use (string value) #backup_swift_container=volumebackups # The size in bytes of Swift backup objects (integer value) #backup_swift_object_size=52428800 # The size in bytes that changes are tracked for incremental # backups. backup_swift_object_size has to be multiple of # backup_swift_block_size. (integer value) #backup_swift_block_size=32768 # The number of retries to make for Swift operations (integer # value) #backup_swift_retry_attempts=3 # The backoff time in seconds between Swift retries (integer # value) #backup_swift_retry_backoff=2 # Enable or Disable the timer to send the periodic progress # notifications to Ceilometer when backing up the volume to # the Swift backend storage. The default value is True to # enable the timer. (boolean value) #backup_swift_enable_progress_timer=true # # Options defined in cinder.backup.drivers.tsm # # Volume prefix for the backup id when backing up to TSM # (string value) #backup_tsm_volume_prefix=backup # TSM password for the running username (string value) #backup_tsm_password=password # Enable or Disable compression for backups (boolean value) #backup_tsm_compression=true # # Options defined in cinder.backup.manager # # Driver to use for backups. (string value) # Deprecated group/name - [DEFAULT]/backup_service #backup_driver=cinder.backup.drivers.swift # # Options defined in cinder.cmd.volume # # Backend override of host value. (string value) # Deprecated group/name - [DEFAULT]/host #backend_host= # # Options defined in cinder.cmd.volume_usage_audit # # If this option is specified then the start time specified is # used instead of the start time of the last completed audit # period. (string value) #start_time= # If this option is specified then the end time specified is # used instead of the end time of the last completed audit # period. (string value) #end_time= # Send the volume and snapshot create and delete notifications # generated in the specified period. (boolean value) #send_actions=false # # Options defined in cinder.common.config # # File name for the paste.deploy config for cinder-api (string # value) api_paste_config=api-paste.ini # Top-level directory for maintaining cinder's state (string # value) # Deprecated group/name - [DEFAULT]/pybasedir state_path=/var/lib/cinder # IP address of this host (string value) my_ip={{ MANAGEMENT_INTERFACE_IP_ADDRESS }} # Default glance host name or IP (string value) glance_host={{ CONTROLLER_HOST_ADDRESS }} # Default glance port (integer value) #glance_port=9292 # A list of the glance API servers available to cinder # ([hostname|ip]:port) (list value) #glance_api_servers=$glance_host:$glance_port # Version of the glance API to use (integer value) #glance_api_version=1 # Number retries when downloading an image from glance # (integer value) #glance_num_retries=0 # Allow to perform insecure SSL (https) requests to glance # (boolean value) #glance_api_insecure=false # Enables or disables negotiation of SSL layer compression. In # some cases disabling compression can improve data # throughput, such as when high network bandwidth is available # and you use compressed image formats like qcow2. (boolean # value) #glance_api_ssl_compression=false # Location of ca certificates file to use for glance client # requests. (string value) #glance_ca_certificates_file= # http/https timeout value for glance operations. If no value # (None) is supplied here, the glanceclient default value is # used. (integer value) #glance_request_timeout= # The topic that scheduler nodes listen on (string value) #scheduler_topic=cinder-scheduler # The topic that volume nodes listen on (string value) #volume_topic=cinder-volume # The topic that volume backup nodes listen on (string value) #backup_topic=cinder-backup # DEPRECATED: Deploy v1 of the Cinder API. (boolean value) #enable_v1_api=true # Deploy v2 of the Cinder API. (boolean value) #enable_v2_api=true # Enables or disables rate limit of the API. (boolean value) #api_rate_limit=true # Specify list of extensions to load when using # osapi_volume_extension option with # cinder.api.contrib.select_extensions (list value) #osapi_volume_ext_list= # osapi volume extension to load (multi valued) #osapi_volume_extension=cinder.api.contrib.standard_extensions # Full class name for the Manager for volume (string value) #volume_manager=cinder.volume.manager.VolumeManager # Full class name for the Manager for volume backup (string # value) #backup_manager=cinder.backup.manager.BackupManager # Full class name for the Manager for scheduler (string value) #scheduler_manager=cinder.scheduler.manager.SchedulerManager # Name of this node. This can be an opaque identifier. It is # not necessarily a host name, FQDN, or IP address. (string # value) #host=cinder # Availability zone of this node (string value) #storage_availability_zone=nova # Default availability zone for new volumes. If not set, the # storage_availability_zone option value is used as the # default for new volumes. (string value) #default_availability_zone= # Default volume type to use (string value) #default_volume_type= # Time period for which to generate volume usages. The options # are hour, day, month, or year. (string value) #volume_usage_audit_period=month # Path to the rootwrap configuration file to use for running # commands as root (string value) rootwrap_config=/etc/cinder/rootwrap.conf # Enable monkey patching (boolean value) #monkey_patch=false # List of modules/decorators to monkey patch (list value) #monkey_patch_modules= # Maximum time since last check-in for a service to be # considered up (integer value) #service_down_time=60 # The full class name of the volume API class to use (string # value) #volume_api_class=cinder.volume.api.API # The full class name of the volume backup API class (string # value) #backup_api_class=cinder.backup.api.API # The strategy to use for auth. Supports noauth, keystone, and # deprecated. (string value) auth_strategy=keystone # A list of backend names to use. These backend names should # be backed by a unique [CONFIG] group with its options (list # value) #enabled_backends= # Whether snapshots count against gigabyte quota (boolean # value) #no_snapshot_gb_quota=false # The full class name of the volume transfer API class (string # value) #transfer_api_class=cinder.transfer.api.API # The full class name of the volume replication API class # (string value) #replication_api_class=cinder.replication.api.API # The full class name of the consistencygroup API class # (string value) #consistencygroup_api_class=cinder.consistencygroup.api.API # OpenStack privileged account username. Used for requests to # other services (such as Nova) that require an account with # special rights. (string value) #os_privileged_user_name= # Password associated with the OpenStack privileged account. # (string value) #os_privileged_user_password= # Tenant name associated with the OpenStack privileged # account. (string value) #os_privileged_user_tenant= # # Options defined in cinder.compute # # The full class name of the compute API class to use (string # value) #compute_api_class=cinder.compute.nova.API # # Options defined in cinder.compute.nova # # Match this value when searching for nova in the service # catalog. Format is: separated values of the form: # :: (string value) #nova_catalog_info=compute:Compute Service:publicURL # Same as nova_catalog_info, but for admin endpoint. (string # value) #nova_catalog_admin_info=compute:Compute Service:adminURL # Override service catalog lookup with template for nova # endpoint e.g. http://localhost:8774/v2/%(project_id)s # (string value) #nova_endpoint_template= # Same as nova_endpoint_template, but for admin endpoint. # (string value) #nova_endpoint_admin_template= # Region name of this node (string value) #os_region_name= # Location of ca certificates file to use for nova client # requests. (string value) #nova_ca_certificates_file= # Allow to perform insecure SSL requests to nova (boolean # value) #nova_api_insecure=false # # Options defined in cinder.db.api # # Services to be added to the available pool on create # (boolean value) #enable_new_services=true # Template string to be used to generate volume names (string # value) volume_name_template=volume-%s # Template string to be used to generate snapshot names # (string value) snapshot_name_template=snapshot-%s # Template string to be used to generate backup names (string # value) backup_name_template=backup-%s # # Options defined in cinder.db.base # # Driver to use for database access (string value) #db_driver=cinder.db # # Options defined in cinder.image.glance # # Default core properties of image (list value) #glance_core_properties=checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size # A list of url schemes that can be downloaded directly via # the direct_url. Currently supported schemes: [file]. (list # value) #allowed_direct_url_schemes= # # Options defined in cinder.image.image_utils # # Directory used for temporary storage during image conversion # (string value) #image_conversion_dir=$state_path/conversion # # Options defined in cinder.openstack.common.eventlet_backdoor # # Enable eventlet backdoor. Acceptable values are 0, , # and :, where 0 results in listening on a random # tcp port number; results in listening on the # specified port number (and not enabling backdoor if that # port is in use); and : results in listening on # the smallest unused port number within the specified range # of port numbers. The chosen port is displayed in the # service's log file. (string value) #backdoor_port= # # Options defined in cinder.openstack.common.periodic_task # # Some periodic tasks can be run in a separate process. Should # we run them here? (boolean value) #run_external_periodic_tasks=true # # Options defined in cinder.openstack.common.policy # # The JSON file that defines policies. (string value) #policy_file=policy.json # Default rule. Enforced when a requested rule is not found. # (string value) #policy_default_rule=default # Directories where policy configuration files are stored. # They can be relative to any directory in the search path # defined by the config_dir option, or absolute paths. The # file defined by policy_file must exist for these directories # to be searched. Missing or empty directories are ignored. # (multi valued) #policy_dirs=policy.d # # Options defined in cinder.openstack.common.versionutils # # Enables or disables fatal status of deprecations. (boolean # value) #fatal_deprecations=false # # Options defined in cinder.scheduler.driver # # The scheduler host manager class to use (string value) #scheduler_host_manager=cinder.scheduler.host_manager.HostManager # Maximum number of attempts to schedule an volume (integer # value) #scheduler_max_attempts=3 # # Options defined in cinder.scheduler.host_manager # # Which filter class names to use for filtering hosts when not # specified in the request. (list value) #scheduler_default_filters=AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter # Which weigher class names to use for weighing hosts. (list # value) #scheduler_default_weighers=CapacityWeigher # # Options defined in cinder.scheduler.manager # # Default scheduler driver to use (string value) #scheduler_driver=cinder.scheduler.filter_scheduler.FilterScheduler # # Options defined in cinder.scheduler.scheduler_options # # Absolute path to scheduler configuration JSON file. (string # value) #scheduler_json_config_location= # # Options defined in cinder.scheduler.simple # # This configure option has been deprecated along with the # SimpleScheduler. New scheduler is able to gather capacity # information for each host, thus setting the maximum number # of volume gigabytes for host is no longer needed. It's safe # to remove this configure from cinder.conf. (integer value) #max_gigabytes=10000 # # Options defined in cinder.scheduler.weights.capacity # # Multiplier used for weighing volume capacity. Negative # numbers mean to stack vs spread. (floating point value) #capacity_weight_multiplier=1.0 # Multiplier used for weighing volume capacity. Negative # numbers mean to stack vs spread. (floating point value) #allocated_capacity_weight_multiplier=-1.0 # # Options defined in cinder.scheduler.weights.volume_number # # Multiplier used for weighing volume number. Negative numbers # mean to spread vs stack. (floating point value) #volume_number_multiplier=-1.0 # # Options defined in cinder.transfer.api # # The number of characters in the salt. (integer value) #volume_transfer_salt_length=8 # The number of characters in the autogenerated auth key. # (integer value) #volume_transfer_key_length=16 # # Options defined in cinder.volume.api # # Cache volume availability zones in memory for the provided # duration in seconds (integer value) #az_cache_duration=3600 # Create volume from snapshot at the host where snapshot # resides (boolean value) #snapshot_same_host=true # Ensure that the new volumes are the same AZ as snapshot or # source volume (boolean value) #cloned_volume_same_az=true # # Options defined in cinder.volume.driver # # The maximum number of times to rescan iSER targetto find # volume (integer value) #num_iser_scan_tries=3 # This option is deprecated and unused. It will be removed in # the Liberty release. (integer value) #iser_num_targets= # Prefix for iSER volumes (string value) #iser_target_prefix=iqn.2010-10.org.openstack: # The IP address that the iSER daemon is listening on (string # value) #iser_ip_address=$my_ip # The port that the iSER daemon is listening on (integer # value) #iser_port=3260 # The name of the iSER target user-land tool to use (string # value) #iser_helper=tgtadm # Number of times to attempt to run flakey shell commands # (integer value) #num_shell_tries=3 # The percentage of backend capacity is reserved (integer # value) #reserved_percentage=0 # This option is deprecated and unused. It will be removed in # the Liberty release. (integer value) #iscsi_num_targets= # Prefix for iSCSI volumes (string value) #iscsi_target_prefix=iqn.2010-10.org.openstack: # The IP address that the iSCSI daemon is listening on (string # value) iscsi_ip_address={{ MANAGEMENT_INTERFACE_IP_ADDRESS }} # The list of secondary IP addresses of the iSCSI daemon (list # value) #iscsi_secondary_ip_addresses= # The port that the iSCSI daemon is listening on (integer # value) iscsi_port=3260 # The maximum number of times to rescan targets to find volume # (integer value) # Deprecated group/name - [DEFAULT]/num_iscsi_scan_tries #num_volume_device_scan_tries=3 # The backend name for a given driver implementation (string # value) volume_backend_name=LVM_iSCSI # Do we attach/detach volumes in cinder using multipath for # volume to image and image to volume transfers? (boolean # value) #use_multipath_for_image_xfer=false # If this is set to True, attachment of volumes for image # transfer will be aborted when multipathd is not running. # Otherwise, it will fallback to single path. (boolean value) #enforce_multipath_for_image_xfer=false # Method used to wipe old volumes (string value) volume_clear=zero # Size in MiB to wipe at start of old volumes. 0 => all # (integer value) volume_clear_size=50 # The flag to pass to ionice to alter the i/o priority of the # process used to zero a volume after deletion, for example # "-c3" for idle only priority. (string value) #volume_clear_ionice= # iSCSI target user-land tool to use. tgtadm is default, use # lioadm for LIO iSCSI support, scstadmin for SCST target # support, iseradm for the ISER protocol, ietadm for iSCSI # Enterprise Target, iscsictl for Chelsio iSCSI Target or fake # for testing. (string value) iscsi_helper=lioadm # Volume configuration file storage directory (string value) volumes_dir=$state_path/volumes # IET configuration file (string value) #iet_conf=/etc/iet/ietd.conf # Chiscsi (CXT) global defaults configuration file (string # value) #chiscsi_conf=/etc/chelsio-iscsi/chiscsi.conf # This option is deprecated and unused. It will be removed in # the next release. (string value) #lio_initiator_iqns= # Sets the behavior of the iSCSI target to either perform # blockio or fileio optionally, auto can be set and Cinder # will autodetect type of backing device (string value) #iscsi_iotype=fileio # The default block size used when copying/clearing volumes # (string value) #volume_dd_blocksize=1M # The blkio cgroup name to be used to limit bandwidth of # volume copy (string value) #volume_copy_blkio_cgroup_name=cinder-volume-copy # The upper limit of bandwidth of volume copy. 0 => unlimited # (integer value) #volume_copy_bps_limit=0 # Sets the behavior of the iSCSI target to either perform # write-back(on) or write-through(off). This parameter is # valid if iscsi_helper is set to tgtadm or iseradm. (string # value) #iscsi_write_cache=on # Determines the iSCSI protocol for new iSCSI volumes, created # with tgtadm or lioadm target helpers. In order to enable # RDMA, this parameter should be set with the value "iser". # The supported iSCSI protocol values are "iscsi" and "iser". # (string value) #iscsi_protocol=iscsi # The path to the client certificate key for verification, if # the driver supports it. (string value) #driver_client_cert_key= # The path to the client certificate for verification, if the # driver supports it. (string value) #driver_client_cert= # Tell driver to use SSL for connection to backend storage if # the driver supports it. (boolean value) #driver_use_ssl=false # Float representation of the over subscription ratio when # thin provisioning is involved. Default ratio is 20.0, # meaning provisioned capacity can be 20 times of the total # physical capacity. If the ratio is 10.5, it means # provisioned capacity can be 10.5 times of the total physical # capacity. A ratio of 1.0 means provisioned capacity cannot # exceed the total physical capacity. A ratio lower than 1.0 # will be ignored and the default value will be used instead. # (floating point value) #max_over_subscription_ratio=20.0 # Certain ISCSI targets have predefined target names, SCST # target driver uses this name. (string value) #scst_target_iqn_name= # SCST target implementation can choose from multiple SCST # target drivers. (string value) #scst_target_driver=iscsi # Option to enable/disable CHAP authentication for targets. # (boolean value) # Deprecated group/name - [DEFAULT]/eqlx_use_chap #use_chap_auth=false # CHAP user name. (string value) # Deprecated group/name - [DEFAULT]/eqlx_chap_login #chap_username= # Password for specified CHAP account name. (string value) # Deprecated group/name - [DEFAULT]/eqlx_chap_password #chap_password= # Namespace for driver private data values to be saved in. # (string value) #driver_data_namespace= # String representation for an equation that will be used to # filter hosts. Only used when the driver filter is set to be # used by the Cinder scheduler. (string value) #filter_function= # String representation for an equation that will be used to # determine the goodness of a host. Only used when using the # goodness weigher is set to be used by the Cinder scheduler. # (string value) #goodness_function= # # Options defined in cinder.volume.drivers.block_device # # List of all available devices (list value) #available_devices= # # Options defined in cinder.volume.drivers.cloudbyte.options # # These values will be used for CloudByte storage's addQos API # call. (dict value) #cb_add_qosgroup=latency:15,iops:10,graceallowed:false,iopscontrol:true,memlimit:0,throughput:0,tpcontrol:false,networkspeed:0 # Driver will use this API key to authenticate against the # CloudByte storage's management interface. (string value) #cb_apikey=None # CloudByte storage specific account name. This maps to a # project name in OpenStack. (string value) #cb_account_name=None # This corresponds to the name of Tenant Storage Machine (TSM) # in CloudByte storage. A volume will be created in this TSM. # (string value) #cb_tsm_name=None # A retry value in seconds. Will be used by the driver to # check if volume creation was successful in CloudByte # storage. (integer value) #cb_confirm_volume_create_retry_interval=5 # Will confirm a successful volume creation in CloudByte # storage by making this many number of attempts. (integer # value) #cb_confirm_volume_create_retries=3 # These values will be used for CloudByte storage's # createVolume API call. (dict value) #cb_create_volume=compression:off,deduplication:off,blocklength:512B,sync:always,protocoltype:ISCSI,recordsize:16k # # Options defined in cinder.volume.drivers.datera # # DEPRECATED: This will be removed in the Liberty release. Use # san_login and san_password instead. This directly sets the # Datera API token. (string value) #datera_api_token= # Datera API port. (string value) #datera_api_port=7717 # Datera API version. (string value) #datera_api_version=1 # Number of replicas to create of an inode. (string value) #datera_num_replicas=3 # # Options defined in cinder.volume.drivers.dell.dell_storagecenter_common # # Storage Center System Serial Number (integer value) #dell_sc_ssn=64702 # Dell API port (integer value) #dell_sc_api_port=3033 # Name of the server folder to use on the Storage Center # (string value) #dell_sc_server_folder=openstack # Name of the volume folder to use on the Storage Center # (string value) #dell_sc_volume_folder=openstack # # Options defined in cinder.volume.drivers.emc.emc_vmax_common # # use this file for cinder emc plugin config data (string # value) #cinder_emc_config_file=/etc/cinder/cinder_emc_config.xml # # Options defined in cinder.volume.drivers.emc.emc_vnx_cli # # VNX authentication scope type. (string value) #storage_vnx_authentication_type=global # Directory path that contains the VNX security file. Make # sure the security file is generated first. (string value) #storage_vnx_security_file_dir= # Naviseccli Path. (string value) #naviseccli_path= # Storage pool name. (string value) #storage_vnx_pool_name= # VNX secondary SP IP Address. (string value) #san_secondary_ip= # Default timeout for CLI operations in minutes. For example, # LUN migration is a typical long running operation, which # depends on the LUN size and the load of the array. An upper # bound in the specific deployment can be set to avoid # unnecessary long wait. By default, it is 365 days long. # (integer value) #default_timeout=525600 # Default max number of LUNs in a storage group. By default, # the value is 255. (integer value) #max_luns_per_storage_group=255 # To destroy storage group when the last LUN is removed from # it. By default, the value is False. (boolean value) #destroy_empty_storage_group=false # Mapping between hostname and its iSCSI initiator IP # addresses. (string value) #iscsi_initiators= # Automatically register initiators. By default, the value is # False. (boolean value) #initiator_auto_registration=false # Automatically deregister initiators after the related # storage group is destroyed. By default, the value is False. # (boolean value) #initiator_auto_deregistration=false # Report free_capacity_gb as 0 when the limit to maximum # number of pool LUNs is reached. By default, the value is # False. (boolean value) #check_max_pool_luns_threshold=false # Delete a LUN even if it is in Storage Groups. (boolean # value) #force_delete_lun_in_storagegroup=false # # Options defined in cinder.volume.drivers.emc.xtremio # # XMS cluster id in multi-cluster environment (string value) #xtremio_cluster_name= # # Options defined in cinder.volume.drivers.eqlx # # Group name to use for creating volumes. Defaults to # "group-0". (string value) #eqlx_group_name=group-0 # Timeout for the Group Manager cli command execution. Default # is 30. (integer value) #eqlx_cli_timeout=30 # Maximum retry count for reconnection. Default is 5. (integer # value) #eqlx_cli_max_retries=5 # Use CHAP authentication for targets. Note that this option # is deprecated in favour of "use_chap_auth" as specified in # cinder/volume/driver.py and will be removed in next release. # (boolean value) #eqlx_use_chap=false # Existing CHAP account name. Note that this option is # deprecated in favour of "chap_username" as specified in # cinder/volume/driver.py and will be removed in next release. # (string value) #eqlx_chap_login=admin # Password for specified CHAP account name. Note that this # option is deprecated in favour of "chap_password" as # specified in cinder/volume/driver.py and will be removed in # the next release (string value) #eqlx_chap_password=password # Pool in which volumes will be created. Defaults to # "default". (string value) #eqlx_pool=default # # Options defined in cinder.volume.drivers.glusterfs # # File with the list of available gluster shares (string # value) #glusterfs_shares_config=/etc/cinder/glusterfs_shares # Create volumes as sparsed files which take no space.If set # to False volume is created as regular file.In such case # volume creation takes a lot of time. (boolean value) #glusterfs_sparsed_volumes=true # Create volumes as QCOW2 files rather than raw files. # (boolean value) #glusterfs_qcow2_volumes=false # Base dir containing mount points for gluster shares. (string # value) #glusterfs_mount_point_base=$state_path/mnt # # Options defined in cinder.volume.drivers.hds.hds # # The configuration file for the Cinder HDS driver for HUS # (string value) #hds_cinder_config_file=/opt/hds/hus/cinder_hus_conf.xml # # Options defined in cinder.volume.drivers.hds.iscsi # # Configuration file for HDS iSCSI cinder plugin (string # value) #hds_hnas_iscsi_config_file=/opt/hds/hnas/cinder_iscsi_conf.xml # # Options defined in cinder.volume.drivers.hds.nfs # # Configuration file for HDS NFS cinder plugin (string value) #hds_hnas_nfs_config_file=/opt/hds/hnas/cinder_nfs_conf.xml # # Options defined in cinder.volume.drivers.hitachi.hbsd_common # # Serial number of storage system (string value) #hitachi_serial_number= # Name of an array unit (string value) #hitachi_unit_name= # Pool ID of storage system (integer value) #hitachi_pool_id= # Thin pool ID of storage system (integer value) #hitachi_thin_pool_id= # Range of logical device of storage system (string value) #hitachi_ldev_range= # Default copy method of storage system (string value) #hitachi_default_copy_method=FULL # Copy speed of storage system (integer value) #hitachi_copy_speed=3 # Interval to check copy (integer value) #hitachi_copy_check_interval=3 # Interval to check copy asynchronously (integer value) #hitachi_async_copy_check_interval=10 # Control port names for HostGroup or iSCSI Target (string # value) #hitachi_target_ports= # Range of group number (string value) #hitachi_group_range= # Request for creating HostGroup or iSCSI Target (boolean # value) #hitachi_group_request=false # # Options defined in cinder.volume.drivers.hitachi.hbsd_fc # # Request for FC Zone creating HostGroup (boolean value) #hitachi_zoning_request=false # # Options defined in cinder.volume.drivers.hitachi.hbsd_horcm # # Instance numbers for HORCM (string value) #hitachi_horcm_numbers=200,201 # Username of storage system for HORCM (string value) #hitachi_horcm_user= # Password of storage system for HORCM (string value) #hitachi_horcm_password= # Add to HORCM configuration (boolean value) #hitachi_horcm_add_conf=true # # Options defined in cinder.volume.drivers.hitachi.hbsd_iscsi # # Add CHAP user (boolean value) #hitachi_add_chap_user=false # iSCSI authentication method (string value) #hitachi_auth_method= # iSCSI authentication username (string value) #hitachi_auth_user=HBSD-CHAP-user # iSCSI authentication password (string value) #hitachi_auth_password=HBSD-CHAP-password # # Options defined in cinder.volume.drivers.huawei # # The configuration file for the Cinder Huawei driver (string # value) #cinder_huawei_conf_file=/etc/cinder/cinder_huawei_conf.xml # # Options defined in cinder.volume.drivers.ibm.flashsystem # # Connection protocol should be FC. (string value) #flashsystem_connection_protocol=FC # Connect with multipath (FC only). (boolean value) #flashsystem_multipath_enabled=false # Allows vdisk to multi host mapping. (boolean value) #flashsystem_multihostmap_enabled=true # # Options defined in cinder.volume.drivers.ibm.gpfs # # Specifies the path of the GPFS directory where Block Storage # volume and snapshot files are stored. (string value) #gpfs_mount_point_base= # Specifies the path of the Image service repository in GPFS. # Leave undefined if not storing images in GPFS. (string # value) #gpfs_images_dir= # Specifies the type of image copy to be used. Set this when # the Image service repository also uses GPFS so that image # files can be transferred efficiently from the Image service # to the Block Storage service. There are two valid values: # "copy" specifies that a full copy of the image is made; # "copy_on_write" specifies that copy-on-write optimization # strategy is used and unmodified blocks of the image file are # shared efficiently. (string value) #gpfs_images_share_mode= # Specifies an upper limit on the number of indirections # required to reach a specific block due to snapshots or # clones. A lengthy chain of copy-on-write snapshots or # clones can have a negative impact on performance, but # improves space utilization. 0 indicates unlimited clone # depth. (integer value) #gpfs_max_clone_depth=0 # Specifies that volumes are created as sparse files which # initially consume no space. If set to False, the volume is # created as a fully allocated file, in which case, creation # may take a significantly longer time. (boolean value) #gpfs_sparse_volumes=true # Specifies the storage pool that volumes are assigned to. By # default, the system storage pool is used. (string value) #gpfs_storage_pool=system # # Options defined in cinder.volume.drivers.ibm.ibmnas # # IBMNAS platform type to be used as backend storage; valid # values are - v7ku : for using IBM Storwize V7000 Unified, # sonas : for using IBM Scale Out NAS, gpfs-nas : for using # NFS based IBM GPFS deployments. (string value) #ibmnas_platform_type=v7ku # # Options defined in cinder.volume.drivers.ibm.storwize_svc # # Storage system storage pool for volumes (string value) #storwize_svc_volpool_name=volpool # Storage system space-efficiency parameter for volumes # (percentage) (integer value) #storwize_svc_vol_rsize=2 # Storage system threshold for volume capacity warnings # (percentage) (integer value) #storwize_svc_vol_warning=0 # Storage system autoexpand parameter for volumes (True/False) # (boolean value) #storwize_svc_vol_autoexpand=true # Storage system grain size parameter for volumes # (32/64/128/256) (integer value) #storwize_svc_vol_grainsize=256 # Storage system compression option for volumes (boolean # value) #storwize_svc_vol_compression=false # Enable Easy Tier for volumes (boolean value) #storwize_svc_vol_easytier=true # The I/O group in which to allocate volumes (integer value) #storwize_svc_vol_iogrp=0 # Maximum number of seconds to wait for FlashCopy to be # prepared. Maximum value is 600 seconds (10 minutes) (integer # value) #storwize_svc_flashcopy_timeout=120 # Connection protocol (iSCSI/FC) (string value) #storwize_svc_connection_protocol=iSCSI # Configure CHAP authentication for iSCSI connections # (Default: Enabled) (boolean value) #storwize_svc_iscsi_chap_enabled=true # Connect with multipath (FC only; iSCSI multipath is # controlled by Nova) (boolean value) #storwize_svc_multipath_enabled=false # Allows vdisk to multi host mapping (boolean value) #storwize_svc_multihostmap_enabled=true # Indicate whether svc driver is compatible for NPIV setup. If # it is compatible, it will allow no wwpns being returned on # get_conn_fc_wwpns during initialize_connection (boolean # value) #storwize_svc_npiv_compatibility_mode=false # Allow tenants to specify QOS on create (boolean value) #storwize_svc_allow_tenant_qos=false # If operating in stretched cluster mode, specify the name of # the pool in which mirrored copies are stored.Example: # "pool2" (string value) #storwize_svc_stretched_cluster_partner= # # Options defined in cinder.volume.drivers.ibm.xiv_ds8k # # Proxy driver that connects to the IBM Storage Array (string # value) #xiv_ds8k_proxy=xiv_ds8k_openstack.nova_proxy.XIVDS8KNovaProxy # Connection type to the IBM Storage Array (string value) #xiv_ds8k_connection_type=iscsi # CHAP authentication mode, effective only for iscsi # (disabled|enabled) (string value) #xiv_chap=disabled # # Options defined in cinder.volume.drivers.lvm # # Name for the VG that will contain exported volumes (string # value) volume_group=cinder-volumes # If >0, create LVs with multiple mirrors. Note that this # requires lvm_mirrors + 2 PVs with available space (integer # value) #lvm_mirrors=0 # Type of LVM volumes to deploy (string value) #lvm_type=default # LVM conf file to use for the LVM driver in Cinder; this # setting is ignored if the specified file does not exist (You # can also specify 'None' to not use a conf file even if one # exists). (string value) #lvm_conf_file=/etc/cinder/lvm.conf # # Options defined in cinder.volume.drivers.netapp.options # # The vFiler unit on which provisioning of block storage # volumes will be done. This option is only used by the driver # when connecting to an instance with a storage family of Data # ONTAP operating in 7-Mode. Only use this option when # utilizing the MultiStore feature on the NetApp storage # system. (string value) #netapp_vfiler= # The name of the config.conf stanza for a Data ONTAP (7-mode) # HA partner. This option is only used by the driver when # connecting to an instance with a storage family of Data # ONTAP operating in 7-Mode, and it is required if the storage # protocol selected is FC. (string value) #netapp_partner_backend_name= # Administrative user account name used to access the storage # system or proxy server. (string value) #netapp_login= # Password for the administrative user account specified in # the netapp_login option. (string value) #netapp_password= # This option specifies the virtual storage server (Vserver) # name on the storage cluster on which provisioning of block # storage volumes should occur. (string value) #netapp_vserver= # The hostname (or IP address) for the storage system or proxy # server. (string value) #netapp_server_hostname= # The TCP port to use for communication with the storage # system or proxy server. If not specified, Data ONTAP drivers # will use 80 for HTTP and 443 for HTTPS; E-Series will use # 8080 for HTTP and 8443 for HTTPS. (integer value) #netapp_server_port= # This option is used to specify the path to the E-Series # proxy application on a proxy server. The value is combined # with the value of the netapp_transport_type, # netapp_server_hostname, and netapp_server_port options to # create the URL used by the driver to connect to the proxy # application. (string value) #netapp_webservice_path=/devmgr/v2 # This option is only utilized when the storage family is # configured to eseries. This option is used to restrict # provisioning to the specified controllers. Specify the value # of this option to be a comma separated list of controller # hostnames or IP addresses to be used for provisioning. # (string value) #netapp_controller_ips= # Password for the NetApp E-Series storage array. (string # value) #netapp_sa_password= # This option is used to restrict provisioning to the # specified storage pools. Only dynamic disk pools are # currently supported. Specify the value of this option to be # a comma separated list of disk pool names to be used for # provisioning. (string value) #netapp_storage_pools= # This option is used to define how the controllers in the # E-Series storage array will work with the particular # operating system on the hosts that are connected to it. # (string value) #netapp_eseries_host_type=linux_dm_mp # If the percentage of available space for an NFS share has # dropped below the value specified by this option, the NFS # image cache will be cleaned. (integer value) #thres_avl_size_perc_start=20 # When the percentage of available space on an NFS share has # reached the percentage specified by this option, the driver # will stop clearing files from the NFS image cache that have # not been accessed in the last M minutes, where M is the # value of the expiry_thres_minutes configuration option. # (integer value) #thres_avl_size_perc_stop=60 # This option specifies the threshold for last access time for # images in the NFS image cache. When a cache cleaning cycle # begins, images in the cache that have not been accessed in # the last M minutes, where M is the value of this parameter, # will be deleted from the cache to create free space on the # NFS share. (integer value) #expiry_thres_minutes=720 # This option specifies the path of the NetApp copy offload # tool binary. Ensure that the binary has execute permissions # set which allow the effective user of the cinder-volume # process to execute the file. (string value) #netapp_copyoffload_tool_path= # The quantity to be multiplied by the requested volume size # to ensure enough space is available on the virtual storage # server (Vserver) to fulfill the volume creation request. # (floating point value) #netapp_size_multiplier=1.2 # This option is only utilized when the storage protocol is # configured to use iSCSI or FC. This option is used to # restrict provisioning to the specified controller volumes. # Specify the value of this option to be a comma separated # list of NetApp controller volume names to be used for # provisioning. (string value) #netapp_volume_list= # The storage family type used on the storage system; valid # values are ontap_7mode for using Data ONTAP operating in # 7-Mode, ontap_cluster for using clustered Data ONTAP, or # eseries for using E-Series. (string value) #netapp_storage_family=ontap_cluster # The storage protocol to be used on the data path with the # storage system. (string value) #netapp_storage_protocol= # The transport protocol used when communicating with the # storage system or proxy server. (string value) #netapp_transport_type=http # # Options defined in cinder.volume.drivers.nfs # # File with the list of available nfs shares (string value) #nfs_shares_config=/etc/cinder/nfs_shares # Create volumes as sparsed files which take no space.If set # to False volume is created as regular file.In such case # volume creation takes a lot of time. (boolean value) #nfs_sparsed_volumes=true # Percent of ACTUAL usage of the underlying volume before no # new volumes can be allocated to the volume destination. # (floating point value) #nfs_used_ratio=0.95 # This will compare the allocated to available space on the # volume destination. If the ratio exceeds this number, the # destination will no longer be valid. (floating point value) #nfs_oversub_ratio=1.0 # Base dir containing mount points for nfs shares. (string # value) #nfs_mount_point_base=$state_path/mnt # Mount options passed to the nfs client. See section of the # nfs man page for details. (string value) #nfs_mount_options= # The number of attempts to mount nfs shares before raising an # error. At least one attempt will be made to mount an nfs # share, regardless of the value specified. (integer value) #nfs_mount_attempts=3 # # Options defined in cinder.volume.drivers.nimble # # Nimble Controller pool name (string value) #nimble_pool_name=default # Nimble Subnet Label (string value) #nimble_subnet_label=* # # Options defined in cinder.volume.drivers.openvstorage # # Vpool to use for volumes - backend is defined by vpool not # by us. (string value) #vpool_name= # # Options defined in cinder.volume.drivers.prophetstor.options # # DPL pool uuid in which DPL volumes are stored. (string # value) #dpl_pool= # DPL port number. (integer value) #dpl_port=8357 # # Options defined in cinder.volume.drivers.pure # # REST API authorization token. (string value) #pure_api_token= # # Options defined in cinder.volume.drivers.quobyte # # URL to the Quobyte volume e.g., quobyte:/// (string value) #quobyte_volume_url= # Path to a Quobyte Client configuration file. (string value) #quobyte_client_cfg= # Create volumes as sparse files which take no space. If set # to False, volume is created as regular file.In such case # volume creation takes a lot of time. (boolean value) #quobyte_sparsed_volumes=true # Create volumes as QCOW2 files rather than raw files. # (boolean value) #quobyte_qcow2_volumes=true # Base dir containing the mount point for the Quobyte volume. # (string value) #quobyte_mount_point_base=$state_path/mnt # # Options defined in cinder.volume.drivers.rbd # # The RADOS pool where rbd volumes are stored (string value) #rbd_pool=rbd # The RADOS client name for accessing rbd volumes - only set # when using cephx authentication (string value) #rbd_user= # Path to the ceph configuration file (string value) #rbd_ceph_conf= # Flatten volumes created from snapshots to remove dependency # from volume to snapshot (boolean value) #rbd_flatten_volume_from_snapshot=false # The libvirt uuid of the secret for the rbd_user volumes # (string value) #rbd_secret_uuid= # Directory where temporary image files are stored when the # volume driver does not write them directly to the volume. # Warning: this option is now deprecated, please use # image_conversion_dir instead. (string value) #volume_tmp_dir= # Maximum number of nested volume clones that are taken before # a flatten occurs. Set to 0 to disable cloning. (integer # value) #rbd_max_clone_depth=5 # Volumes will be chunked into objects of this size (in # megabytes). (integer value) #rbd_store_chunk_size=4 # Timeout value (in seconds) used when connecting to ceph # cluster. If value < 0, no timeout is set and default # librados value is used. (integer value) #rados_connect_timeout=-1 # # Options defined in cinder.volume.drivers.remotefs # # IP address or Hostname of NAS system. (string value) #nas_ip= # User name to connect to NAS system. (string value) #nas_login=admin # Password to connect to NAS system. (string value) #nas_password= # SSH port to use to connect to NAS system. (integer value) #nas_ssh_port=22 # Filename of private key to use for SSH authentication. # (string value) #nas_private_key= # Allow network-attached storage systems to operate in a # secure environment where root level access is not permitted. # If set to False, access is as the root user and insecure. If # set to True, access is not as root. If set to auto, a check # is done to determine if this is a new installation: True is # used if so, otherwise False. Default is auto. (string value) #nas_secure_file_operations=auto # Set more secure file permissions on network-attached storage # volume files to restrict broad other/world access. If set to # False, volumes are created with open permissions. If set to # True, volumes are created with permissions for the cinder # user and group (660). If set to auto, a check is done to # determine if this is a new installation: True is used if so, # otherwise False. Default is auto. (string value) #nas_secure_file_permissions=auto # Path to the share to use for storing Cinder volumes. For # example: "/srv/export1" for an NFS server export available # at 10.0.5.10:/srv/export1 . (string value) #nas_share_path= # Options used to mount the storage backend file system where # Cinder volumes are stored. (string value) #nas_mount_options= # # Options defined in cinder.volume.drivers.san.hp.hp_3par_common # # 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 # (string value) #hp3par_api_url= # 3PAR Super user username (string value) #hp3par_username= # 3PAR Super user password (string value) #hp3par_password= # List of the CPG(s) to use for volume creation (list value) #hp3par_cpg=OpenStack # The CPG to use for Snapshots for volumes. If empty the # userCPG will be used. (string value) #hp3par_cpg_snap= # The time in hours to retain a snapshot. You can't delete it # before this expires. (string value) #hp3par_snapshot_retention= # The time in hours when a snapshot expires and is deleted. # This must be larger than expiration (string value) #hp3par_snapshot_expiration= # Enable HTTP debugging to 3PAR (boolean value) #hp3par_debug=false # List of target iSCSI addresses to use. (list value) #hp3par_iscsi_ips= # Enable CHAP authentication for iSCSI connections. (boolean # value) #hp3par_iscsi_chap_enabled=false # # Options defined in cinder.volume.drivers.san.hp.hp_lefthand_rest_proxy # # HP LeftHand WSAPI Server Url like https://:8081/lhos (string value) #hplefthand_api_url= # HP LeftHand Super user username (string value) #hplefthand_username= # HP LeftHand Super user password (string value) #hplefthand_password= # HP LeftHand cluster name (string value) #hplefthand_clustername= # Configure CHAP authentication for iSCSI connections # (Default: Disabled) (boolean value) #hplefthand_iscsi_chap_enabled=false # Enable HTTP debugging to LeftHand (boolean value) #hplefthand_debug=false # # Options defined in cinder.volume.drivers.san.san # # Use thin provisioning for SAN volumes? (boolean value) #san_thin_provision=true # IP address of SAN controller (string value) #san_ip= # Username for SAN controller (string value) #san_login=admin # Password for SAN controller (string value) #san_password= # Filename of private key to use for SSH authentication # (string value) #san_private_key= # Cluster name to use for creating volumes (string value) #san_clustername= # SSH port to use with SAN (integer value) #san_ssh_port=22 # Execute commands locally instead of over SSH; use if the # volume service is running on the SAN device (boolean value) #san_is_local=false # SSH connection timeout in seconds (integer value) #ssh_conn_timeout=30 # Minimum ssh connections in the pool (integer value) #ssh_min_pool_conn=1 # Maximum ssh connections in the pool (integer value) #ssh_max_pool_conn=5 # # Options defined in cinder.volume.drivers.scality # # Path or URL to Scality SOFS configuration file (string # value) #scality_sofs_config= # Base dir where Scality SOFS shall be mounted (string value) #scality_sofs_mount_point=$state_path/scality # Path from Scality SOFS root to volume dir (string value) #scality_sofs_volume_dir=cinder/volumes # # Options defined in cinder.volume.drivers.smbfs # # File with the list of available smbfs shares. (string value) #smbfs_shares_config=/etc/cinder/smbfs_shares # Default format that will be used when creating volumes if no # volume format is specified. (string value) #smbfs_default_volume_format=qcow2 # Create volumes as sparsed files which take no space rather # than regular files when using raw format, in which case # volume creation takes lot of time. (boolean value) #smbfs_sparsed_volumes=true # Percent of ACTUAL usage of the underlying volume before no # new volumes can be allocated to the volume destination. # (floating point value) #smbfs_used_ratio=0.95 # This will compare the allocated to available space on the # volume destination. If the ratio exceeds this number, the # destination will no longer be valid. (floating point value) #smbfs_oversub_ratio=1.0 # Base dir containing mount points for smbfs shares. (string # value) #smbfs_mount_point_base=$state_path/mnt # Mount options passed to the smbfs client. See mount.cifs man # page for details. (string value) #smbfs_mount_options=noperm,file_mode=0775,dir_mode=0775 # # Options defined in cinder.volume.drivers.solidfire # # Set 512 byte emulation on volume creation; (boolean value) #sf_emulate_512=true # Allow tenants to specify QOS on create (boolean value) #sf_allow_tenant_qos=false # Create SolidFire accounts with this prefix. Any string can # be used here, but the string "hostname" is special and will # create a prefix using the cinder node hostsname (previous # default behavior). The default is NO prefix. (string value) #sf_account_prefix= # Account name on the SolidFire Cluster to use as owner of # template/cache volumes (created if does not exist). (string # value) #sf_template_account_name=openstack-vtemplate # Create an internal cache of copy of images when a bootable # volume is created to eliminate fetch from glance and qemu- # conversion on subsequent calls. (boolean value) #sf_allow_template_caching=true # SolidFire API port. Useful if the device api is behind a # proxy on a different port. (integer value) #sf_api_port=443 # # Options defined in cinder.volume.drivers.srb # # Comma-separated list of REST servers IP to connect to. (eg # http://IP1/,http://IP2:81/path (string value) #srb_base_urls= # # Options defined in cinder.volume.drivers.violin.v6000_common # # IP address or hostname of mg-a (string value) #gateway_mga= # IP address or hostname of mg-b (string value) #gateway_mgb= # Use igroups to manage targets and initiators (boolean value) #use_igroups=false # Global backend request timeout, in seconds (integer value) #request_timeout=300 # # Options defined in cinder.volume.drivers.vmware.vmdk # # IP address for connecting to VMware ESX/VC server. (string # value) #vmware_host_ip= # Username for authenticating with VMware ESX/VC server. # (string value) #vmware_host_username= # Password for authenticating with VMware ESX/VC server. # (string value) #vmware_host_password= # Optional VIM service WSDL Location e.g # http:///vimService.wsdl. Optional over-ride to # default location for bug work-arounds. (string value) #vmware_wsdl_location= # Number of times VMware ESX/VC server API must be retried # upon connection related issues. (integer value) #vmware_api_retry_count=10 # The interval (in seconds) for polling remote tasks invoked # on VMware ESX/VC server. (floating point value) #vmware_task_poll_interval=0.5 # Name for the folder in the VC datacenter that will contain # cinder volumes. (string value) #vmware_volume_folder=cinder-volumes # Timeout in seconds for VMDK volume transfer between Cinder # and Glance. (integer value) #vmware_image_transfer_timeout_secs=7200 # Max number of objects to be retrieved per batch. Query # results will be obtained in batches from the server and not # in one shot. Server may still limit the count to something # less than the configured value. (integer value) #vmware_max_objects_retrieval=100 # Optional string specifying the VMware VC server version. The # driver attempts to retrieve the version from VMware VC # server. Set this configuration only if you want to override # the VC server version. (string value) #vmware_host_version= # Directory where virtual disks are stored during volume # backup and restore. (string value) #vmware_tmp_dir=/tmp # # Options defined in cinder.volume.drivers.windows.windows # # Path to store VHD backed volumes (string value) #windows_iscsi_lun_path=C:\iSCSIVirtualDisks # # Options defined in cinder.volume.drivers.xio # # Default storage pool for volumes. (integer value) #ise_storage_pool=1 # Raid level for ISE volumes. (integer value) #ise_raid=1 # Number of retries (per port) when establishing connection to # ISE management port. (integer value) #ise_connection_retries=5 # Interval (secs) between retries. (integer value) #ise_retry_interval=1 # Number on retries to get completion status after issuing a # command to ISE. (integer value) #ise_completion_retries=30 # # Options defined in cinder.volume.drivers.zfssa.zfssanfs # # Data path IP address (string value) #zfssa_data_ip= # HTTPS port number (string value) #zfssa_https_port=443 # Options to be passed while mounting share over nfs (string # value) #zfssa_nfs_mount_options= # Storage pool name. (string value) #zfssa_nfs_pool= # Project name. (string value) #zfssa_nfs_project=NFSProject # Share name. (string value) #zfssa_nfs_share=nfs_share # Data compression. (string value) #zfssa_nfs_share_compression=off # Synchronous write bias-latency, throughput. (string value) #zfssa_nfs_share_logbias=latency # REST connection timeout. (seconds) (integer value) #zfssa_rest_timeout= # # Options defined in cinder.volume.manager # # Driver to use for volume creation (string value) volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver # Timeout for creating the volume to migrate to when # performing volume migration (seconds) (integer value) #migration_create_volume_timeout_secs=300 # Offload pending volume delete during volume service startup # (boolean value) #volume_service_inithost_offload=false # FC Zoning mode configured (string value) #zoning_mode=none # User defined capabilities, a JSON formatted string # specifying key/value pairs. The key/value pairs can be used # by the CapabilitiesFilter to select between backends when # requests specify volume types. For example, specifying a # service level or the geographical location of a backend, # then creating a volume type to allow the user to select by # these different properties. (string value) #extra_capabilities={} [BRCD_FABRIC_EXAMPLE] # # Options defined in cinder.zonemanager.drivers.brocade.brcd_fabric_opts # # Management IP of fabric (string value) #fc_fabric_address= # Fabric user ID (string value) #fc_fabric_user= # Password for user (string value) #fc_fabric_password= # Connecting port (integer value) #fc_fabric_port=22 # overridden zoning policy (string value) #zoning_policy=initiator-target # overridden zoning activation state (boolean value) #zone_activate=true # overridden zone name prefix (string value) #zone_name_prefix= # Principal switch WWN of the fabric (string value) #principal_switch_wwn= [CISCO_FABRIC_EXAMPLE] # # Options defined in cinder.zonemanager.drivers.cisco.cisco_fabric_opts # # Management IP of fabric (string value) #cisco_fc_fabric_address= # Fabric user ID (string value) #cisco_fc_fabric_user= # Password for user (string value) #cisco_fc_fabric_password= # Connecting port (integer value) #cisco_fc_fabric_port=22 # overridden zoning policy (string value) #cisco_zoning_policy=initiator-target # overridden zoning activation state (boolean value) #cisco_zone_activate=true # overridden zone name prefix (string value) #cisco_zone_name_prefix= # VSAN of the Fabric (string value) #cisco_zoning_vsan= [database] # # Options defined in oslo.db.concurrency # # Enable the experimental use of thread pooling for all DB API # calls (boolean value) # Deprecated group/name - [DEFAULT]/dbapi_use_tpool #use_tpool=false # The SQLAlchemy connection string to use to connect to the # database. (string value) connection=postgresql://{{ CINDER_DB_USER }}:{{ CINDER_DB_PASSWORD }}@{{ CONTROLLER_HOST_ADDRESS }}/cinder [fc-zone-manager] # # Options defined in cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver # # Southbound connector for zoning operation (string value) #brcd_sb_connector=cinder.zonemanager.drivers.brocade.brcd_fc_zone_client_cli.BrcdFCZoneClientCLI # # Options defined in cinder.zonemanager.drivers.cisco.cisco_fc_zone_driver # # Southbound connector for zoning operation (string value) #cisco_sb_connector=cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI # # Options defined in cinder.zonemanager.fc_zone_manager # # FC Zone Driver responsible for zone management (string # value) #zone_driver=cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver # Zoning policy configured by user; valid values include # "initiator-target" or "initiator" (string value) #zoning_policy=initiator-target # Comma separated list of Fibre Channel fabric names. This # list of names is used to retrieve other SAN credentials for # connecting to each SAN fabric (string value) #fc_fabric_names= # FC SAN Lookup Service (string value) #fc_san_lookup_service=cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService [keymgr] # # Options defined in cinder.keymgr # # The full class name of the key manager API class (string # value) #api_class=cinder.keymgr.conf_key_mgr.ConfKeyManager # # Options defined in cinder.keymgr.conf_key_mgr # # Fixed key returned by key manager, specified in hex (string # value) #fixed_key= # # Options defined in cinder.keymgr.key_mgr # # Authentication url for encryption service. (string value) #encryption_auth_url=http://localhost:5000/v3 # Url for encryption service. (string value) #encryption_api_url=http://localhost:9311/v1 [oslo_concurrency] lock_path = /var/lock/cinder [keystone_authtoken] # # Options defined in keystonemiddleware.auth_token # # Complete public Identity API endpoint. (string value) auth_uri=http://{{ CONTROLLER_HOST_ADDRESS }}:5000/v2.0 # API version of the admin Identity API endpoint. (string # value) #auth_version= # Do not handle authorization requests within the middleware, # but delegate the authorization decision to downstream WSGI # components. (boolean value) #delay_auth_decision=false # Request timeout value for communicating with Identity API # server. (integer value) #http_connect_timeout= # How many times are we trying to reconnect when communicating # with Identity API Server. (integer value) #http_request_max_retries=3 # Env key for the swift cache. (string value) #cache= # Required if identity server requires client certificate # (string value) #certfile= # Required if identity server requires client certificate # (string value) #keyfile= # A PEM encoded Certificate Authority to use when verifying # HTTPs connections. Defaults to system CAs. (string value) #cafile= # Verify HTTPS connections. (boolean value) #insecure=false # Directory used to cache files related to PKI tokens. (string # value) #signing_dir= # Optionally specify a list of memcached server(s) to use for # caching. If left undefined, tokens will instead be cached # in-process. (list value) # Deprecated group/name - [DEFAULT]/memcache_servers #memcached_servers= # In order to prevent excessive effort spent validating # tokens, the middleware caches previously-seen tokens for a # configurable duration (in seconds). Set to -1 to disable # caching completely. (integer value) #token_cache_time=300 # Determines the frequency at which the list of revoked tokens # is retrieved from the Identity service (in seconds). A high # number of revocation events combined with a low cache # duration may significantly reduce performance. (integer # value) #revocation_cache_time=10 # (Optional) If defined, indicate whether token data should be # authenticated or authenticated and encrypted. Acceptable # values are MAC or ENCRYPT. If MAC, token data is # authenticated (with HMAC) in the cache. If ENCRYPT, token # data is encrypted and authenticated in the cache. If the # value is not one of these options or empty, auth_token will # raise an exception on initialization. (string value) #memcache_security_strategy= # (Optional, mandatory if memcache_security_strategy is # defined) This string is used for key derivation. (string # value) #memcache_secret_key= # (Optional) Number of seconds memcached server is considered # dead before it is tried again. (integer value) #memcache_pool_dead_retry=300 # (Optional) Maximum total number of open connections to every # memcached server. (integer value) #memcache_pool_maxsize=10 # (Optional) Socket timeout in seconds for communicating with # a memcache server. (integer value) #memcache_pool_socket_timeout=3 # (Optional) Number of seconds a connection to memcached is # held unused in the pool before it is closed. (integer value) #memcache_pool_unused_timeout=60 # (Optional) Number of seconds that an operation will wait to # get a memcache client connection from the pool. (integer # value) #memcache_pool_conn_get_timeout=10 # (Optional) Use the advanced (eventlet safe) memcache client # pool. The advanced pool will only work under python 2.x. # (boolean value) #memcache_use_advanced_pool=false # (Optional) Indicate whether to set the X-Service-Catalog # header. If False, middleware will not ask for service # catalog on token validation and will not set the X-Service- # Catalog header. (boolean value) #include_service_catalog=true # Used to control the use and type of token binding. Can be # set to: "disabled" to not check token binding. "permissive" # (default) to validate binding information if the bind type # is of a form known to the server and ignore it if not. # "strict" like "permissive" but if the bind type is unknown # the token will be rejected. "required" any form of token # binding is needed to be allowed. Finally the name of a # binding method that must be present in tokens. (string # value) #enforce_token_bind=permissive # If true, the revocation list will be checked for cached # tokens. This requires that PKI tokens are configured on the # identity server. (boolean value) #check_revocations_for_cached=false # Hash algorithms to use for hashing PKI tokens. This may be a # single algorithm or multiple. The algorithms are those # supported by Python standard hashlib.new(). The hashes will # be tried in the order given, so put the preferred one first # for performance. The result of the first hash will be stored # in the cache. This will typically be set to multiple values # only while migrating from a less secure algorithm to a more # secure one. Once all the old tokens are expired this option # should be set to a single value for better performance. # (list value) #hash_algorithms=md5 [matchmaker_redis] # # Options defined in oslo.messaging # # Host to locate redis. (string value) #host=127.0.0.1 # Use this port to connect to redis host. (integer value) #port=6379 # Password for Redis server (optional). (string value) #password= [matchmaker_ring] # # Options defined in oslo.messaging # # Matchmaker ring file (JSON). (string value) # Deprecated group/name - [DEFAULT]/matchmaker_ringfile #ringfile=/etc/oslo/matchmaker_ring.json [oslo_messaging_amqp] # # Options defined in oslo.messaging # # address prefix used when sending to a specific server # (string value) #server_request_prefix=exclusive # address prefix used when broadcasting to all servers (string # value) #broadcast_prefix=broadcast # address prefix when sending to any server in group (string # value) #group_request_prefix=unicast # Name for the AMQP container (string value) #container_name= # Timeout for inactive connections (in seconds) (integer # value) #idle_timeout=0 # Debug: dump AMQP frames to stdout (boolean value) #trace=false # CA certificate PEM file for verifing server certificate # (string value) #ssl_ca_file= # Identifying certificate PEM file to present to clients # (string value) #ssl_cert_file= # Private key PEM file used to sign cert_file certificate # (string value) #ssl_key_file= # Password for decrypting ssl_key_file (if encrypted) (string # value) #ssl_key_password= # Accept clients using either SSL or plain TCP (boolean value) #allow_insecure_clients=false [oslo_messaging_qpid] # # Options defined in oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues=false # Auto-delete queues in AMQP. (boolean value) #amqp_auto_delete=false # Size of RPC connection pool. (integer value) #rpc_conn_pool_size=30 # Qpid broker hostname. (string value) #qpid_hostname=localhost # Qpid broker port. (integer value) #qpid_port=5672 # Qpid HA cluster host:port pairs. (list value) #qpid_hosts=$qpid_hostname:$qpid_port # Username for Qpid connection. (string value) #qpid_username= # Password for Qpid connection. (string value) #qpid_password= # Space separated list of SASL mechanisms to use for auth. # (string value) #qpid_sasl_mechanisms= # Seconds between connection keepalive heartbeats. (integer # value) #qpid_heartbeat=60 # Transport to use, either 'tcp' or 'ssl'. (string value) #qpid_protocol=tcp # Whether to disable the Nagle algorithm. (boolean value) #qpid_tcp_nodelay=true # The number of prefetched messages held by receiver. (integer # value) #qpid_receiver_capacity=1 # The qpid topology version to use. Version 1 is what was # originally used by impl_qpid. Version 2 includes some # backwards-incompatible changes that allow broker federation # to work. Users should update to version 2 when they are # able to take everything down, as it requires a clean break. # (integer value) #qpid_topology_version=1 [oslo_messaging_rabbit] # # Options defined in oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues=false # Auto-delete queues in AMQP. (boolean value) #amqp_auto_delete=false # Size of RPC connection pool. (integer value) #rpc_conn_pool_size=30 # SSL version to use (valid only if SSL enabled). Valid values # are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may # be available on some distributions. (string value) #kombu_ssl_version= # SSL key file (valid only if SSL enabled). (string value) #kombu_ssl_keyfile= # SSL cert file (valid only if SSL enabled). (string value) #kombu_ssl_certfile= # SSL certification authority file (valid only if SSL # enabled). (string value) #kombu_ssl_ca_certs= # How long to wait before reconnecting in response to an AMQP # consumer cancel notification. (floating point value) #kombu_reconnect_delay=1.0 # The RabbitMQ broker address where a single node is used. # (string value) rabbit_host={{ RABBITMQ_HOST }} # The RabbitMQ broker port where a single node is used. # (integer value) rabbit_port={{ RABBITMQ_PORT }} # RabbitMQ HA cluster host:port pairs. (list value) rabbit_hosts=$rabbit_host:$rabbit_port # Connect over SSL for RabbitMQ. (boolean value) #rabbit_use_ssl=false # The RabbitMQ userid. (string value) rabbit_userid={{ RABBITMQ_USER }} # The RabbitMQ password. (string value) rabbit_password={{ RABBITMQ_PASSWORD }} # The RabbitMQ login method. (string value) #rabbit_login_method=AMQPLAIN # The RabbitMQ virtual host. (string value) #rabbit_virtual_host=/ # How frequently to retry connecting with RabbitMQ. (integer # value) #rabbit_retry_interval=1 # How long to backoff for between retries when connecting to # RabbitMQ. (integer value) #rabbit_retry_backoff=2 # Maximum number of RabbitMQ connection retries. Default is 0 # (infinite retry count). (integer value) #rabbit_max_retries=0 # Use HA queues in RabbitMQ (x-ha-policy: all). If you change # this option, you must wipe the RabbitMQ database. (boolean # value) #rabbit_ha_queues=false # Number of seconds after which the Rabbit broker is # considered down if heartbeat's keep-alive fails (0 disables # the heartbeat, >0 enables it. Enabling heartbeats requires # kombu>=3.0.7 and amqp>=1.4.0). EXPERIMENTAL (integer value) #heartbeat_timeout_threshold=0 # How often times during the heartbeat_timeout_threshold we # check the heartbeat. (integer value) #heartbeat_rate=2 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake # (boolean value) #fake_rabbit=false [profiler] # # Options defined in cinder.service # # If False fully disable profiling feature. (boolean value) #profiler_enabled=false # If False doesn't trace SQL requests. (boolean value) #trace_sqlalchemy=false [DEFAULT] [keystone_authtoken] # # From keystonemiddleware.auth_token # # Complete public Identity API endpoint. (string value) #auth_uri = # API version of the admin Identity API endpoint. (string value) #auth_version = # Do not handle authorization requests within the middleware, but # delegate the authorization decision to downstream WSGI components. # (boolean value) #delay_auth_decision = false # Request timeout value for communicating with Identity API server. # (integer value) #http_connect_timeout = # How many times are we trying to reconnect when communicating with # Identity API Server. (integer value) #http_request_max_retries = 3 # Env key for the swift cache. (string value) #cache = # Required if identity server requires client certificate (string # value) #certfile = # Required if identity server requires client certificate (string # value) #keyfile = # A PEM encoded Certificate Authority to use when verifying HTTPs # connections. Defaults to system CAs. (string value) #cafile = # Verify HTTPS connections. (boolean value) #insecure = false # Directory used to cache files related to PKI tokens. (string value) #signing_dir = # Optionally specify a list of memcached server(s) to use for caching. # If left undefined, tokens will instead be cached in-process. (list # value) # Deprecated group/name - [DEFAULT]/memcache_servers #memcached_servers = # In order to prevent excessive effort spent validating tokens, the # middleware caches previously-seen tokens for a configurable duration # (in seconds). Set to -1 to disable caching completely. (integer # value) #token_cache_time = 300 # Determines the frequency at which the list of revoked tokens is # retrieved from the Identity service (in seconds). A high number of # revocation events combined with a low cache duration may # significantly reduce performance. (integer value) #revocation_cache_time = 10 # (Optional) If defined, indicate whether token data should be # authenticated or authenticated and encrypted. Acceptable values are # MAC or ENCRYPT. If MAC, token data is authenticated (with HMAC) in # the cache. If ENCRYPT, token data is encrypted and authenticated in # the cache. If the value is not one of these options or empty, # auth_token will raise an exception on initialization. (string value) #memcache_security_strategy = # (Optional, mandatory if memcache_security_strategy is defined) This # string is used for key derivation. (string value) #memcache_secret_key = # (Optional) Number of seconds memcached server is considered dead # before it is tried again. (integer value) #memcache_pool_dead_retry = 300 # (Optional) Maximum total number of open connections to every # memcached server. (integer value) #memcache_pool_maxsize = 10 # (Optional) Socket timeout in seconds for communicating with a # memcache server. (integer value) #memcache_pool_socket_timeout = 3 # (Optional) Number of seconds a connection to memcached is held # unused in the pool before it is closed. (integer value) #memcache_pool_unused_timeout = 60 # (Optional) Number of seconds that an operation will wait to get a # memcache client connection from the pool. (integer value) #memcache_pool_conn_get_timeout = 10 # (Optional) Use the advanced (eventlet safe) memcache client pool. # The advanced pool will only work under python 2.x. (boolean value) #memcache_use_advanced_pool = false # (Optional) Indicate whether to set the X-Service-Catalog header. If # False, middleware will not ask for service catalog on token # validation and will not set the X-Service-Catalog header. (boolean # value) #include_service_catalog = true # Used to control the use and type of token binding. Can be set to: # "disabled" to not check token binding. "permissive" (default) to # validate binding information if the bind type is of a form known to # the server and ignore it if not. "strict" like "permissive" but if # the bind type is unknown the token will be rejected. "required" any # form of token binding is needed to be allowed. Finally the name of a # binding method that must be present in tokens. (string value) #enforce_token_bind = permissive # If true, the revocation list will be checked for cached tokens. This # requires that PKI tokens are configured on the identity server. # (boolean value) #check_revocations_for_cached = false # Hash algorithms to use for hashing PKI tokens. This may be a single # algorithm or multiple. The algorithms are those supported by Python # standard hashlib.new(). The hashes will be tried in the order given, # so put the preferred one first for performance. The result of the # first hash will be stored in the cache. This will typically be set # to multiple values only while migrating from a less secure algorithm # to a more secure one. Once all the old tokens are expired this # option should be set to a single value for better performance. (list # value) #hash_algorithms = md5 # Prefix to prepend at the beginning of the path. Deprecated, use # identity_uri. (string value) #auth_admin_prefix = # Host providing the admin Identity API endpoint. Deprecated, use # identity_uri. (string value) #auth_host = 127.0.0.1 # Port of the admin Identity API endpoint. Deprecated, use # identity_uri. (integer value) #auth_port = 35357 # Protocol of the admin Identity API endpoint (http or https). # Deprecated, use identity_uri. (string value) #auth_protocol = https # Complete admin Identity API endpoint. This should specify the # unversioned root endpoint e.g. https://localhost:35357/ (string # value) identity_uri = http://{{ CONTROLLER_HOST_ADDRESS }}:35357 # This option is deprecated and may be removed in a future release. # Single shared secret with the Keystone configuration used for # bootstrapping a Keystone installation, or otherwise bypassing the # normal authentication process. This option should not be used, use # `admin_user` and `admin_password` instead. (string value) #admin_token = # Service username. (string value) admin_user = {{ CINDER_SERVICE_USER }} # Service user password. (string value) admin_password = {{ CINDER_SERVICE_PASSWORD }} # Service tenant name. (string value) admin_tenant_name = service