name: moonshot-m2-deployment kind: cluster description: | Install a build armv8b64 system into the M.2 SSD storage of an HP Moonshot node, using a combination of the pxeboot.write extension and the installer system. systems: - morph: systems/installer-system-armv8b64.morph deploy: installer: type: extensions/pxeboot location: 14:58:d0:57:7f:42 PXEBOOT_MODE: existing-server PXEBOOT_CONFIG_TFTP_ADDRESS: sftp://192.168.0.1/srv/nfsboot/tftp/ PXEBOOT_ROOTFS_RSYNC_ADDRESS: rsync://192.168.0.1/srv/nfsboot/ PXEBOOT_PXE_REBOOT_COMMAND: | ssh Administrator@10.0.1.10 set node power off force c31n1 ssh Administrator@10.0.1.10 set node boot pxe c31n1 # Nodes are powered on twice as sometimes powering them on # once is not enough ssh Administrator@10.0.1.10 set node power on c31n1 ssh Administrator@10.0.1.10 set node power on c31n1 PXEBOOT_REBOOT_COMMAND: | ssh Administrator@10.0.1.10 set node power off force c31n1 ssh Administrator@10.0.1.10 set node boot m.2 c31n1 ssh Administrator@10.0.1.10 set node power on c31n1 ssh Administrator@10.0.1.10 set node power on c31n1 INSTALLER_TARGET_STORAGE_DEVICE: /dev/sda INSTALLER_ROOTFS_TO_INSTALL: /rootfs INSTALLER_POST_INSTALL_COMMAND: | while : ; do echo "enter 'installed' in your deployment machine to finish the installation" sleep 2 done INSTALLER_CREATE_BOOT_PARTITION: true HOSTNAME: installer-system-c31n1 DTB_PATH: boot/m400-1003.dtb KERNEL_ARGS: console=ttyS0,9600n8r init=/usr/lib/baserock-installer/installer INSTALL_FILES: install-files/moonshot/manifest MOONSHOT_KERNEL: true subsystems: - morph: systems/devel-system-armv8b64.morph deploy: to-install: type: extensions/sysroot location: /rootfs HOSTNAME: baserock-c31n1 DTB_PATH: boot/m400-1003.dtb INSTALL_FILES: install-files/moonshot/manifest MOONSHOT_KERNEL: true BOOT_DEVICE: /dev/sda1 ROOT_DEVICE: /dev/sda2 BOOTLOADER_CONFIG_FORMAT: extlinux BOOTLOADER_INSTALL: none