From edeb456f6980896ad651d734ea3f3f2f3e034026 Mon Sep 17 00:00:00 2001
From: Francisco Redondo Marchena <francisco.marchena@codethink.co.uk>
Date: Thu, 12 Feb 2015 17:26:00 +0000
Subject: SPLITME: Add all Openstack

---
 .../plugins/linuxbridge/linuxbridge_conf.ini       | 78 ++++++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 openstack/etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini

(limited to 'openstack/etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini')

diff --git a/openstack/etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini b/openstack/etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini
new file mode 100644
index 00000000..94fe9803
--- /dev/null
+++ b/openstack/etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini
@@ -0,0 +1,78 @@
+[vlans]
+# (StrOpt) Type of network to allocate for tenant networks. The
+# default value 'local' is useful only for single-box testing and
+# provides no connectivity between hosts. You MUST change this to
+# 'vlan' and configure network_vlan_ranges below in order for tenant
+# networks to provide connectivity between hosts. Set to 'none' to
+# disable creation of tenant networks.
+#
+# tenant_network_type = local
+# Example: tenant_network_type = vlan
+
+# (ListOpt) Comma-separated list of
+# <physical_network>[:<vlan_min>:<vlan_max>] tuples enumerating ranges
+# of VLAN IDs on named physical networks that are available for
+# allocation. All physical networks listed are available for flat and
+# VLAN provider network creation. Specified ranges of VLAN IDs are
+# available for tenant network allocation if tenant_network_type is
+# 'vlan'. If empty, only local networks may be created.
+#
+# network_vlan_ranges =
+# Example: network_vlan_ranges = physnet1:1000:2999
+
+[linux_bridge]
+# (ListOpt) Comma-separated list of
+# <physical_network>:<physical_interface> tuples mapping physical
+# network names to the agent's node-specific physical network
+# interfaces to be used for flat and VLAN networks. All physical
+# networks listed in network_vlan_ranges on the server should have
+# mappings to appropriate interfaces on each agent.
+#
+# physical_interface_mappings =
+# Example: physical_interface_mappings = physnet1:eth1
+
+[vxlan]
+# (BoolOpt) enable VXLAN on the agent
+# VXLAN support can be enabled when agent is managed by ml2 plugin using
+# linuxbridge mechanism driver. Useless if set while using linuxbridge plugin.
+# enable_vxlan = False
+#
+# (IntOpt) use specific TTL for vxlan interface protocol packets
+# ttl =
+#
+# (IntOpt) use specific TOS for vxlan interface protocol packets
+# tos =
+#
+# (StrOpt) multicast group to use for broadcast emulation.
+# This group must be the same on all the agents.
+# vxlan_group = 224.0.0.1
+#
+# (StrOpt) Local IP address to use for VXLAN endpoints (required)
+# local_ip =
+#
+# (BoolOpt) Flag to enable l2population extension. This option should be used
+# in conjunction with ml2 plugin l2population mechanism driver (in that case,
+# both linuxbridge and l2population mechanism drivers should be loaded).
+# It enables plugin to populate VXLAN forwarding table, in order to limit
+# the use of broadcast emulation (multicast will be turned off if kernel and
+# iproute2 supports unicast flooding - requires 3.11 kernel and iproute2 3.10)
+# l2_population = False
+
+[agent]
+# Agent's polling interval in seconds
+# polling_interval = 2
+
+# (BoolOpt) Enable server RPC compatibility with old (pre-havana)
+# agents.
+#
+# rpc_support_old_agents = False
+# Example: rpc_support_old_agents = True
+
+[securitygroup]
+# Firewall driver for realizing neutron security group function
+# firewall_driver = neutron.agent.firewall.NoopFirewallDriver
+# Example: firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
+
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
-- 
cgit v1.2.1