From 11547381784bf7156832caf44d81aa16413385ba Mon Sep 17 00:00:00 2001
From: Adam Coldrick <adam.coldrick@codethink.co.uk>
Date: Tue, 2 Jun 2015 08:40:27 +0000
Subject: Move all the directories used for install-files into a subdirectory

Change-Id: I309c183ce8b9ff9d0f5ac4807244547f2cc4ddf5
---
 .../neutron/plugins/cisco/cisco_plugins.ini        | 100 +++++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 install-files/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini

(limited to 'install-files/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini')

diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini
new file mode 100644
index 00000000..17eae737
--- /dev/null
+++ b/install-files/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini
@@ -0,0 +1,100 @@
+[cisco]
+
+# (StrOpt) A short prefix to prepend to the VLAN number when creating a
+# VLAN interface. For example, if an interface is being created for
+# VLAN 2001 it will be named 'q-2001' using the default prefix.
+#
+# vlan_name_prefix = q-
+# Example: vlan_name_prefix = vnet-
+
+# (StrOpt) A short prefix to prepend to the VLAN number when creating a
+# provider VLAN interface. For example, if an interface is being created
+# for provider VLAN 3003 it will be named 'p-3003' using the default prefix.
+#
+# provider_vlan_name_prefix = p-
+# Example: provider_vlan_name_prefix = PV-
+
+# (BoolOpt) A flag indicating whether Openstack networking should manage the
+# creation and removal of VLAN interfaces for provider networks on the Nexus
+# switches. If the flag is set to False then Openstack will not create or
+# remove VLAN interfaces for provider networks, and the administrator needs
+# to manage these interfaces manually or by external orchestration.
+#
+# provider_vlan_auto_create = True
+
+# (BoolOpt) A flag indicating whether Openstack networking should manage
+# the adding and removing of provider VLANs from trunk ports on the Nexus
+# switches. If the flag is set to False then Openstack will not add or
+# remove provider VLANs from trunk ports, and the administrator needs to
+# manage these operations manually or by external orchestration.
+#
+# provider_vlan_auto_trunk = True
+
+# (StrOpt) Period-separated module path to the model class to use for
+# the Cisco neutron plugin.
+#
+# model_class = neutron.plugins.cisco.models.virt_phy_sw_v2.VirtualPhysicalSwitchModelV2
+
+# (BoolOpt) A flag to enable Layer 3 support on the Nexus switches.
+# Note: This feature is not supported on all models/versions of Cisco
+# Nexus switches. To use this feature, all of the Nexus switches in the
+# deployment must support it.
+# nexus_l3_enable = False
+
+# (BoolOpt) A flag to enable round robin scheduling of routers for SVI.
+# svi_round_robin = False
+
+# Cisco Nexus Switch configurations.
+# Each switch to be managed by Openstack Neutron must be configured here.
+#
+# N1KV Format.
+# [N1KV:<IP address of VSM>]
+# username=<credential username>
+# password=<credential password>
+#
+# Example:
+# [N1KV:2.2.2.2]
+# username=admin
+# password=mySecretPassword
+
+[cisco_n1k]
+
+# (StrOpt) Specify the name of the integration bridge to which the VIFs are
+# attached.
+# Default value: br-int
+# integration_bridge = br-int
+
+# (StrOpt) Name of the policy profile to be associated with a port when no
+# policy profile is specified during port creates.
+# Default value: service_profile
+# default_policy_profile = service_profile
+
+# (StrOpt) Name of the policy profile to be associated with a port owned by
+# network node (dhcp, router).
+# Default value: dhcp_pp
+# network_node_policy_profile = dhcp_pp
+
+# (StrOpt) Name of the network profile to be associated with a network when no
+# network profile is specified during network creates. Admin should pre-create
+# a network profile with this name.
+# Default value: default_network_profile
+# default_network_profile = network_pool
+
+# (IntOpt) Time in seconds for which the plugin polls the VSM for updates in
+# policy profiles.
+# Default value: 60
+# poll_duration = 60
+
+# (BoolOpt) Specify whether tenants are restricted from accessing all the
+# policy profiles.
+# Default value: False, indicating all tenants can access all policy profiles.
+#
+# restrict_policy_profiles = False
+
+# (IntOpt) Number of threads to use to make HTTP requests to the VSM.
+# Default value: 4
+# http_pool_size = 4
+
+# (IntOpt) Timeout duration in seconds for the http request
+# Default value: 15
+# http_timeout = 15
-- 
cgit v1.2.1