From d85382e41efbe3f3f9012a08851f93bb4919de65 Mon Sep 17 00:00:00 2001 From: Tristan Van Berkom Date: Wed, 1 Feb 2017 20:37:29 +0900 Subject: Manual conversion of Baserock's build-essential stratum This huge commit is a manual conversion, notes on what was needed: o project.conf defines the arch specific stuff which was previously hardcoded into YBD, so the stage1 target and target etc are all defined by the build-essential project.conf o Direct and easy changes for git source representation o Added stage1.bst & stage2.bst "stacks", everything built in stage2 build-depends on stage1.bst, and the final build-essential products build-depend on stage2.bst (note build-depend means to depend _only_ for building, not propagated forward). o Instead of using host tools we build on the GNOME flatpak sdk/platform bundles o Some build-essential morph files use $(dirname $(pwd)) for a sysroot, which is weird, it means the morph files rely on building at one directory below the slash sysroot - in buildstream we build in /buildstream/build which is two - had to replace these with $(dirname $(dirname $(pwd))) instead o Remove the devices sections from the fhs-dirs elements, not allowed to create static device nodes in buildstream. --- build-essential.bst | 20 +++++ build-essential/binutils.bst | 23 +++++ build-essential/busybox.bst | 103 +++++++++++++++++++++++ build-essential/ccache.bst | 27 ++++++ build-essential/fhs-dirs.bst | 26 ++++++ build-essential/gawk.bst | 19 +++++ build-essential/gcc.bst | 66 +++++++++++++++ build-essential/glibc.bst | 76 +++++++++++++++++ build-essential/gnome-platform.bst | 27 ++++++ build-essential/gnome-sdk.bst | 20 +++++ build-essential/linux-api-headers.bst | 38 +++++++++ build-essential/m4-tarball.bst | 19 +++++ build-essential/make.bst | 20 +++++ build-essential/stage1-binutils.bst | 38 +++++++++ build-essential/stage1-gcc.bst | 100 ++++++++++++++++++++++ build-essential/stage1.bst | 7 ++ build-essential/stage2-binutils.bst | 38 +++++++++ build-essential/stage2-busybox.bst | 99 ++++++++++++++++++++++ build-essential/stage2-fake-bash.bst | 15 ++++ build-essential/stage2-fhs-dirs.bst | 31 +++++++ build-essential/stage2-gawk.bst | 28 +++++++ build-essential/stage2-gcc-fixed-headers.bst | 37 +++++++++ build-essential/stage2-gcc.bst | 102 +++++++++++++++++++++++ build-essential/stage2-glibc.bst | 120 +++++++++++++++++++++++++++ build-essential/stage2-libstdcxx.bst | 55 ++++++++++++ build-essential/stage2-linux-api-headers.bst | 41 +++++++++ build-essential/stage2-make.bst | 27 ++++++ build-essential/stage2-reset-specs.bst | 33 ++++++++ build-essential/stage2.bst | 19 +++++ build-essential/zlib.bst | 23 +++++ gedit.bst | 16 ---- gnome-platform.bst | 23 ----- gnome-sdk.bst | 27 ------ gspell.bst | 10 --- gtksourceview.bst | 16 ---- libpeas.bst | 16 ---- project.conf | 62 ++++++++++---- 37 files changed, 1344 insertions(+), 123 deletions(-) create mode 100644 build-essential.bst create mode 100644 build-essential/binutils.bst create mode 100644 build-essential/busybox.bst create mode 100644 build-essential/ccache.bst create mode 100644 build-essential/fhs-dirs.bst create mode 100644 build-essential/gawk.bst create mode 100644 build-essential/gcc.bst create mode 100644 build-essential/glibc.bst create mode 100644 build-essential/gnome-platform.bst create mode 100644 build-essential/gnome-sdk.bst create mode 100644 build-essential/linux-api-headers.bst create mode 100644 build-essential/m4-tarball.bst create mode 100644 build-essential/make.bst create mode 100644 build-essential/stage1-binutils.bst create mode 100644 build-essential/stage1-gcc.bst create mode 100644 build-essential/stage1.bst create mode 100644 build-essential/stage2-binutils.bst create mode 100644 build-essential/stage2-busybox.bst create mode 100644 build-essential/stage2-fake-bash.bst create mode 100644 build-essential/stage2-fhs-dirs.bst create mode 100644 build-essential/stage2-gawk.bst create mode 100644 build-essential/stage2-gcc-fixed-headers.bst create mode 100644 build-essential/stage2-gcc.bst create mode 100644 build-essential/stage2-glibc.bst create mode 100644 build-essential/stage2-libstdcxx.bst create mode 100644 build-essential/stage2-linux-api-headers.bst create mode 100644 build-essential/stage2-make.bst create mode 100644 build-essential/stage2-reset-specs.bst create mode 100644 build-essential/stage2.bst create mode 100644 build-essential/zlib.bst delete mode 100644 gedit.bst delete mode 100644 gnome-platform.bst delete mode 100644 gnome-sdk.bst delete mode 100644 gspell.bst delete mode 100644 gtksourceview.bst delete mode 100644 libpeas.bst diff --git a/build-essential.bst b/build-essential.bst new file mode 100644 index 00000000..54a5d00b --- /dev/null +++ b/build-essential.bst @@ -0,0 +1,20 @@ +kind: stack + +depends: +- build-essential/binutils.bst +- build-essential/busybox.bst +- build-essential/ccache.bst +- build-essential/fhs-dirs.bst +- build-essential/gawk.bst +- build-essential/gcc.bst +- build-essential/glibc.bst +- build-essential/linux-api-headers.bst +- build-essential/m4-tarball.bst +- build-essential/make.bst + +# Build essential is the base runtime, ldconfig +# must be run on it. +public: + bst: + integration-commands: + - ldconfig diff --git a/build-essential/binutils.bst b/build-essential/binutils.bst new file mode 100644 index 00000000..39996ffd --- /dev/null +++ b/build-essential/binutils.bst @@ -0,0 +1,23 @@ +kind: autotools + +sources: +- kind: git + url: upstream:binutils-tarball + track: binutils-2.25 + ref: 5500a97a2ad1735db5b35bc51cfb825c1f4c38df + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/glibc.bst +- build-essential/zlib.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + + configure-commands: + - | + ./configure --prefix="%{prefix}" --disable-nls --disable-werror \ + --with-system-zlib diff --git a/build-essential/busybox.bst b/build-essential/busybox.bst new file mode 100644 index 00000000..9eca9302 --- /dev/null +++ b/build-essential/busybox.bst @@ -0,0 +1,103 @@ +kind: manual + +sources: +- kind: git + url: upstream:busybox + track: 1_23_1 + ref: 1ecfe811fe2f70380170ef7d820e8150054e88ca + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/glibc.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + # Busybox's default config has everything enabled. + - make defconfig KCONFIG_NOTIMESTAMP=1 + + - sed -e 's|.*UDHCPC_DEFAULT_SCRIPT.*|CONFIG_UDHCPC_DEFAULT_SCRIPT="'%{prefix}/share/udhcpc/default.script'"|' + -i .config + - sed -e 's|.*IFUPDOWN_IFSTATE_PATH.*|CONFIG_IFUPDOWN_IFSTATE_PATH="/run/ifstate"|' + -i .config + + # Avoid dividing applets between %{prefix}/[s]bin and %{prefix}/usr/[s]bin. + - '[ "%{prefix}" = /usr ] || sed -e ''s/.*INSTALL_NO_USR.*/CONFIG_INSTALL_NO_USR=y/'' + -i .config' + # We have GAWK, but in GENIVI baseline we want to get rid of it + # - sed -e 's/CONFIG_AWK=y.*/# CONFIG_AWK is not set/' -i .config + + # Depends on stuff that was removed since eglibc 2.14. + - sed -e 's/CONFIG_INETD=y.*/# CONFIG_INETD is not set/' -i .config + + # Busybox Patch is incompatible enough with GNU Patch that it can't be + # used for GNULib projects built from Git. + - sed -e 's/CONFIG_PATCH=y.*/# CONFIG_PATCH is not set/' -i .config + + # None of this is needed because we have kmod; and it actually breaks the + # Linux build because depmod isn't compatible enough with util-linux's. + - sed -e 's/CONFIG_DEPMOD=y.*/# CONFIG_DEPMOD is not set/' -i .config + - sed -e 's/CONFIG_INSMOD=y.*/# CONFIG_INSMOD is not set/' -i .config + - sed -e 's/CONFIG_MODPROBE=y.*/# CONFIG_MODPROBE is not set/' -i .config + - sed -e 's/CONFIG_MODPROBE_SMALL=y.*/# CONFIG_MODPROBE_SMALL is not set/' -i .config + - sed -e 's/CONFIG_LSMOD=y.*/# CONFIG_LSMOD is not set/' -i .config + - sed -e 's/CONFIG_RMMOD=y.*/# CONFIG_RMMOD is not set/' -i .config + + # General features that we don't need. + - sed -e 's/CONFIG_FEATURE_MOUNT_CIFS=y.*/# CONFIG_FEATURE_MOUNT_CIFS is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_EXTRA_QUIET=y.*/# CONFIG_FEATURE_EXTRA_QUIET is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_INIT_COREDUMPS=y.*/# CONFIG_FEATURE_INIT_COREDUMPS is not + set/' -i .config + - sed -e 's/CONFIG_FEATURE_INIT_SCTTY=y.*/# CONFIG_FEATURE_INIT_SCTTY is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_INIT_SYSLOG=y.*/# CONFIG_FEATURE_INIT_SYSLOG is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_INITRD=y.*/# CONFIG_FEATURE_INITRD is not set/' -i .config + - sed -e 's/CONFIG_FEATURE_MINIX2=y.*/# CONFIG_FEATURE_MINIX2 is not set/' -i .config + - sed -e 's/CONFIG_FSCK_MINIX=y.*/# CONFIG_FSCK_MINIX is not set/' -i .config + - sed -e 's/CONFIG_LOSETUP=y.*/# CONFIG_LOSETUP is not set/' -i .config + - sed -e 's/CONFIG_LSUSB=y.*/# CONFIG_LSUSB is not set/' -i .config + - sed -e 's/CONFIG_LSPCI=y.*/# CONFIG_LSPCI is not set/' -i .config + - sed -e 's/CONFIG_LZMA=y.*/# CONFIG_LZMA is not set/' -i .config + - sed -e 's/CONFIG_MKFS_EXT2=y.*/# CONFIG_MKFS_EXT2 is not set/' -i .config + - sed -e 's/CONFIG_MKFS_MINIX=y.*/# CONFIG_MKFS_MINIX is not set/' -i .config + - sed -e 's/CONFIG_STRINGS=y.*/# CONFIG_STRINGS is not set/' -i .config + - sed -e 's/CONFIG_UNLZMA=y.*/# CONFIG_UNLZMA is not set/' -i .config + - sed -e 's/CONFIG_UNXZ=y.*/# CONFIG_UNXZ is not set/' -i .config + - sed -e 's/CONFIG_XZ=y.*/# CONFIG_XZ is not set/' -i .config + + # Now turn on some little bits we do need + - sed -e 's/# CONFIG_BBCONFIG is not set/CONFIG_BBCONFIG=y/' -i .config + - sed -e 's/# CONFIG_FEATURE_COMPRESS_BBCONFIG is not set/CONFIG_FEATURE_COMPRESS_BBCONFIG=y/' + -i .config + - sed -e 's/# CONFIG_FEATURE_MOUNT_HELPERS is not set/CONFIG_FEATURE_MOUNT_HELPERS=y/' + -i .config + + build-commands: + - make KCONFIG_NOTIMESTAMP=1 + + install-commands: + - | + # Note here we intentionally ignore '%{prefix}', this is going into '/' + make CONFIG_PREFIX="%{install-root}" KCONFIG_NOTIMESTAMP=1 install && + chmod 6755 "%{install-root}/bin/busybox" + + # Set up man environment variables + - mkdir -p "%{install-root}/etc" + - | + cat << EOF > "%{install-root}/etc/man.conf" + # This file is used by man to provide a manpath for those without one by + # examining their PATH environment variable. + # + # Lines beginning with `#' are comments and are ignored. Any combination of + # tabs or spaces may be used as `whitespace' separators. + + MANDATORY_MANPATH /usr/man + MANDATORY_MANPATH /usr/share/man + MANDATORY_MANPATH /usr/local/share/man + EOF diff --git a/build-essential/ccache.bst b/build-essential/ccache.bst new file mode 100644 index 00000000..ed5b088f --- /dev/null +++ b/build-essential/ccache.bst @@ -0,0 +1,27 @@ +kind: autotools + +sources: +- kind: git + url: upstream:ccache + track: baserock/build-essential + ref: 567631456f0899cdf0c382f898d38aadc8901d32 + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/glibc.bst +- build-essential/zlib.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + - ./configure --prefix="%{prefix}" + install-commands: + - make DESTDIR="%{install-root}" install + - mkdir -p "%{install-root}%{prefix}/lib/ccache" + - for cc in gcc cc g++ c++; do ln -sf "%{prefix}/bin/ccache" "%{install-root}%{prefix}/lib/ccache/$cc"; + done + - for cc in gcc cc g++ c++; do ln -sf "%{prefix}/bin/ccache" "%{install-root}%{prefix}/lib/ccache/%{target}-$cc"; + done diff --git a/build-essential/fhs-dirs.bst b/build-essential/fhs-dirs.bst new file mode 100644 index 00000000..b0b76de3 --- /dev/null +++ b/build-essential/fhs-dirs.bst @@ -0,0 +1,26 @@ +kind: manual + +sources: +- kind: git + url: baserock:baserock/fhs-dirs + track: master + ref: 1218cbd38a4f4e9da75af6f7fae946ca92666afb + +depends: +- filename: build-essential/stage2.bst + type: build + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + install-commands: + - sh ./create-fhs-dirs "%{install-root}" + - install -m 644 passwd "%{install-root}/etc/passwd" + - install -m 600 shadow "%{install-root}/etc/shadow" + - install -m 644 interfaces "%{install-root}/etc/network/interfaces" + - install -m 644 group "%{install-root}/etc/group" + - install -m 644 issue "%{install-root}/etc/issue" + - install -m 644 services "%{install-root}/etc/services" + - install -m 644 protocols "%{install-root}/etc/protocols" + - echo baserock > "%{install-root}/etc/hostname" diff --git a/build-essential/gawk.bst b/build-essential/gawk.bst new file mode 100644 index 00000000..bac25a56 --- /dev/null +++ b/build-essential/gawk.bst @@ -0,0 +1,19 @@ +kind: autotools + +sources: +- kind: git + url: upstream:gawk + track: gawk-4.1-stable + ref: 925f9363c4b0a5bb9375298afcdcf404efb32587 + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/glibc.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + - ./configure --prefix="%{prefix}" --disable-nls diff --git a/build-essential/gcc.bst b/build-essential/gcc.bst new file mode 100644 index 00000000..56ca5d86 --- /dev/null +++ b/build-essential/gcc.bst @@ -0,0 +1,66 @@ +kind: manual + +sources: +- kind: git + url: upstream:gcc-tarball + track: baserock/build-essential + ref: b3c9b176c1f10ebeff5700eb3760e9511f23fa06 + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/linux-api-headers.bst +- build-essential/glibc.bst +- build-essential/zlib.bst +- build-essential/m4-tarball.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + + configure-commands: + - mkdir o + + # Configure flag notes: + # 1. An attempt to stop anything going in %{prefix}/lib64 (which doesn't + # fully work; we will need to hobble the multilib configuration in + # config/i386/t-linux64 if we really want to kill /lib64). + # 2. Avoid having more than one copy of ZLib in use on the system + # 3. Multilib does not make sense in Baserock. + - | + case "%{bst-arch}" in + armv7lhf) ARCH_FLAGS="--with-arch=armv7-a \ + --with-cpu=cortex-a9 \ + --with-tune=cortex-a9 \ + --with-fpu=vfpv3-d16 \ + --with-float=hard" ;; + armv7*) ARCH_FLAGS="--with-arch=armv7-a" ;; + esac + + cd o && ../configure \ + $ARCH_FLAGS \ + --prefix="%{prefix}" \ + `# [1]` --libdir=%{prefix}/lib \ + --disable-bootstrap \ + `# [2]` --with-system-zlib \ + `# [3]` --disable-multilib \ + --enable-languages=c,c++,fortran + + build-commands: + - | + case "%{bst-arch}" in + armv5*) sed -i "s/--host=none/--host=armv5/" o/Makefile + sed -i "s/--target=none/--target=armv5/" o/Makefile ;; + armv7*) sed -i "s/--host=none/--host=armv7a/" o/Makefile + sed -i "s/--target=none/--target=armv7a/" o/Makefile ;; + esac + cd o && make + + install-commands: + - cd o && make DESTDIR="%{install-root}" install + - ln -s gcc "%{install-root}%{prefix}/bin/cc" + - | + for fortran_alias in f77 f90 f95; do + ln -s gfortran "%{install-root}%{prefix}/bin/$fortran_alias" + done diff --git a/build-essential/glibc.bst b/build-essential/glibc.bst new file mode 100644 index 00000000..d634b5f7 --- /dev/null +++ b/build-essential/glibc.bst @@ -0,0 +1,76 @@ +kind: manual + +sources: +- kind: git + url: upstream:glibc + track: release/2.22/master + ref: b995d95a5943785be3ab862b2d3276f3b4a22481 + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/linux-api-headers.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + + configure-commands: + - mkdir o + + - | + case "%{bst-arch}" in + armv7*) + ARCH_FLAGS="--without-fp" ;; + esac + + # We override the PATH here to remove /tools/bin from it. + # Thanks to this glibc finds bash in /bin/bash through the /bin + # symlink. This is important because glibc changes the path to bash + # of the shebang in some scripts and these scripts will be broken if + # they point to bash in /tools/bin/bash. + export PATH="/usr/bin:/sbin:/bin"; + export CFLAGS="-O2 $CFLAGS"; + cd o && ../configure \ + $ARCH_FLAGS \ + --prefix="%{prefix}" \ + --disable-profile \ + --enable-kernel=3.0.0 \ + --without-cvs \ + --without-selinux \ + --enable-obsolete-rpc + + build-commands: + - cd o && make localtime=UTC + + install-commands: + - cd o && make install_root="%{install-root}" localtime=UTC install + - cd o && make install_root="%{install-root}" localtime=UTC localedata/install-locales + - mkdir -p "%{install-root}/etc" + - mkdir -p "%{install-root}/etc/ld.so.conf.d" + - | + cat < nsswitch.conf + passwd: compat + group: compat + shadow: compat + + hosts: files myhostname mdns4_minimal [NOTFOUND=return] dns mdns4 + networks: files + + protocols: db files + services: db files + ethers: db files + rpc: db files + + netgroup: nis + EOF + - install -m 644 -o root -g root nsswitch.conf "%{install-root}/etc/nsswitch.conf" + - | + cat < ld.so.conf + /lib + /usr/lib + /usr/local/lib + include /etc/ld.so.conf.d/*.conf + EOF + - install -m 644 -o root -g root ld.so.conf "%{install-root}/etc/ld.so.conf" diff --git a/build-essential/gnome-platform.bst b/build-essential/gnome-platform.bst new file mode 100644 index 00000000..fd5efb6b --- /dev/null +++ b/build-essential/gnome-platform.bst @@ -0,0 +1,27 @@ +kind: import +description: Import the GNOME Platform +config: + source: files +public: + bst: + integration-commands: + - ldconfig + - | + if [ -d "/app/share/glib-2.0/schemas" ]; then + glib-compile-schemas /app/share/glib-2.0/schemas + fi +arches: + x86_64: + sources: + - kind: ostree + url: gnomesdk:repo/ + track: runtime/org.gnome.Platform/x86_64/3.22 + gpg-key: keys/gnome-sdk.gpg + ref: af7b50663d808bf5cc6eb7538a3481b29c34864d71b719562246071113a18327 + i386: + sources: + - kind: ostree + url: gnomesdk:repo/ + track: runtime/org.gnome.Platform/i386/3.22 + gpg-key: keys/gnome-sdk.gpg + ref: 8c86378e95d305097e64a7b04e23595773ab894ed5d216b49777a22819bff08f diff --git a/build-essential/gnome-sdk.bst b/build-essential/gnome-sdk.bst new file mode 100644 index 00000000..6b0f158f --- /dev/null +++ b/build-essential/gnome-sdk.bst @@ -0,0 +1,20 @@ +kind: import +description: Import the GNOME SDK +config: + source: files + target: usr +arches: + x86_64: + sources: + - kind: ostree + url: gnomesdk:repo/ + track: runtime/org.gnome.Sdk/x86_64/3.22 + gpg-key: keys/gnome-sdk.gpg + ref: bc2d97521fa42ca824b4d28b1b7746e275820b26aa63c9ae08d6aa5eefcfee20 + i386: + sources: + - kind: ostree + url: gnomesdk:repo/ + track: runtime/org.gnome.Sdk/i386/3.22 + gpg-key: keys/gnome-sdk.gpg + ref: f5616d5b7257a81a8e8b08c34cd7ffcfe3b79c80439c969799dc8617fd9ac5c5 diff --git a/build-essential/linux-api-headers.bst b/build-essential/linux-api-headers.bst new file mode 100644 index 00000000..db98e096 --- /dev/null +++ b/build-essential/linux-api-headers.bst @@ -0,0 +1,38 @@ +kind: manual + +sources: +- kind: git + url: upstream:linux + track: v4.0 + ref: 39a8804455fb23f09157341d3ba7db6d7ae6ee76 + +depends: +- filename: build-essential/stage2.bst + type: build + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + install-commands: + - | + case "%{bst-arch}" in + armv5l) + ARCH="arm" ;; + armv7b|armv7l|armv7lhf) + ARCH="arm" ;; + armv8l64|armv8b64) + ARCH="arm64" ;; + x86_32) + ARCH="i386" ;; + x86_64) + ARCH="x86_64" ;; + ppc64) + ARCH="powerpc" ;; + *) + echo "Error: unsupported Morph architecture: %{bst-arch}" >&2 + exit 1 + esac + ARCH=$ARCH make INSTALL_HDR_PATH=dest headers_install + - install -d "%{install-root}%{includedir}" + - cp -r dest/include/* "%{install-root}%{includedir}" diff --git a/build-essential/m4-tarball.bst b/build-essential/m4-tarball.bst new file mode 100644 index 00000000..41f9969d --- /dev/null +++ b/build-essential/m4-tarball.bst @@ -0,0 +1,19 @@ +kind: autotools + +sources: +- kind: git + url: upstream:m4-tarball + track: m4-1.4.17 + ref: 23c11479b3ad787adc7a651ee0c4347839e47723 + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/glibc.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + - ./configure --prefix="%{prefix}" --disable-gcc-warnings diff --git a/build-essential/make.bst b/build-essential/make.bst new file mode 100644 index 00000000..514140cf --- /dev/null +++ b/build-essential/make.bst @@ -0,0 +1,20 @@ +kind: autotools + +sources: +- kind: git + url: upstream:make-tarball + track: baserock/make-4.1-ttyname-segfault-fix + ref: 4978d7129e42340ab9efeb0cb9cae4ad0fa052d4 + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/glibc.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + + configure-commands: + - ./configure --prefix="%{prefix}" --disable-nls diff --git a/build-essential/stage1-binutils.bst b/build-essential/stage1-binutils.bst new file mode 100644 index 00000000..8c89c7ce --- /dev/null +++ b/build-essential/stage1-binutils.bst @@ -0,0 +1,38 @@ +kind: autotools + +sources: +- kind: git + url: upstream:binutils-tarball + track: binutils-2.25 + ref: 5500a97a2ad1735db5b35bc51cfb825c1f4c38df + +depends: +- build-essential/gnome-platform.bst +- build-essential/gnome-sdk.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + # We set the sysroot location dynamically at runtime by passing + # `--sysroot` to GCC, so we need to build a linker with sysroot support. + # We set it to a non-existent directory as a safety net to avoid looking + # at the host dirs in case we forget to set the sysroot. Setting the + # lib path is vital to avoid the tools we build linking to the libraries + # on the host system; the '=' makes the path we give relative to the + # sysroot, which we can then set at runtime by passing -Wl,--sysroot to + # GCC. Although nothing should be installed on /lib64, we configure the + # linker to look at that directory as well to make things more robust + # (currently GCC installs libraries to this directory at least on + # x86_64). + + - | + %{configure} --disable-nls --disable-werror \ + --build=$(sh config.guess) \ + --host=$(sh config.guess) \ + --target=%{target-stage1} \ + --with-sysroot=/nonexistentdir --with-lib-path="=%{prefix}/lib:=%{prefix}/lib64" diff --git a/build-essential/stage1-gcc.bst b/build-essential/stage1-gcc.bst new file mode 100644 index 00000000..81c4d40a --- /dev/null +++ b/build-essential/stage1-gcc.bst @@ -0,0 +1,100 @@ +kind: autotools + +sources: +- kind: git + url: upstream:gcc-tarball + track: baserock/build-essential + ref: b3c9b176c1f10ebeff5700eb3760e9511f23fa06 + +depends: +- build-essential/gnome-platform.bst +- build-essential/gnome-sdk.bst +- build-essential/stage1-binutils.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + # Workaround from LFS due GCC not detecting stack protection correctly + - | + sed -i -e '/k prot/a \ + gcc_cv_libc_provides_ssp=yes + ' gcc/configure + + - mkdir o + + # Configure flag notes: + # 1. See gcc.morph. + # 2. Although we will be setting a sysroot at runtime, giving a + # temporary one at configuration time seems necessary so that + # `--with-native-system-header-dir` produces effect and + # /tools/include is in the include path for the newly built GCC. We + # set it by default to a non-existent directory to avoid GCC looking + # at the host dirs, in case we forget to give it at runtime. + # 3. Disable searching /usr/local/include for headers + # 4. The pass 1 compiler needs to find the libraries we build in pass + # 2. Include path must be set explicility, because it defaults to + # $SYSROOT/usr/include rather than $SYSROOT/include. + # 5. Disable stuff that doesn't work when building a cross compiler + # without an existing libc, and generally try to keep this build as + # simple as possible. + - | + case "%{bst-arch}" in + armv7lhf) ARCH_FLAGS="--with-arch=armv7-a \ + --with-cpu=cortex-a9 \ + --with-tune=cortex-a9 \ + --with-fpu=vfpv3-d16 \ + --with-float=hard" ;; + armv7*) ARCH_FLAGS="--with-arch=armv7-a" ;; + esac + + cd o && ../configure \ + $ARCH_FLAGS \ + --build=$(sh ../config.guess) \ + --host=$(sh ../config.guess) \ + --target=%{target-stage1} \ + --prefix="%{prefix}" \ + `# [1]` --libdir="%{libdir}" \ + `# [2]` --with-sysroot=/nonexistentdir \ + --with-newlib \ + `# [3]` --with-local-prefix="%{prefix}" \ + `# [4]` --with-native-system-header-dir="%{prefix}/include" \ + --without-headers \ + --disable-nls \ + --disable-shared \ + --disable-multilib \ + `# [5]` --disable-decimal-float \ + `# [5]` --disable-threads \ + `# [5]` --disable-libatomic \ + `# [5]` --disable-libgomp \ + `# [5]` --disable-libitm \ + `# [5]` --disable-libquadmath \ + `# [5]` --disable-libsanitizer \ + `# [5]` --disable-libssp \ + `# [5]` --disable-libvtv \ + `# [5]` --disable-libcilkrts \ + `# [5]` --disable-libstdc++-v3 \ + --enable-languages=c,c++ + + build-commands: + - | + # GCC is not passing the correct host/target flags to GMP's configure + # script, which causes it to not use the machine-dependent code for + # the platform and use the generic one instead. However, the generic + # code results on an undefined reference to `__gmpn_invert_limb' in + # ARMv7. Fix the invocation of GMP's configure script so that GMP can + # use the machine-dependent code. + case "%{bst-arch}" in + armv5*) sed -i "s/--host=none/--host=armv5/" o/Makefile + sed -i "s/--target=none/--target=armv5/" o/Makefile ;; + armv7*) sed -i "s/--host=none/--host=armv7a/" o/Makefile + sed -i "s/--target=none/--target=armv7a/" o/Makefile ;; + esac + cd o && make + + install-commands: + - cd o && make DESTDIR="%{install-root}" install diff --git a/build-essential/stage1.bst b/build-essential/stage1.bst new file mode 100644 index 00000000..7304572a --- /dev/null +++ b/build-essential/stage1.bst @@ -0,0 +1,7 @@ +kind: stack + +depends: +- build-essential/gnome-platform.bst +- build-essential/gnome-sdk.bst +- build-essential/stage1-binutils.bst +- build-essential/stage1-gcc.bst diff --git a/build-essential/stage2-binutils.bst b/build-essential/stage2-binutils.bst new file mode 100644 index 00000000..a515d5dd --- /dev/null +++ b/build-essential/stage2-binutils.bst @@ -0,0 +1,38 @@ +kind: autotools + +sources: +- kind: git + url: upstream:binutils-tarball + track: binutils-2.25 + ref: 5500a97a2ad1735db5b35bc51cfb825c1f4c38df + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-glibc.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + - | + export STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" + export CXX="%{target-stage1}-g++ --sysroot=$STAGE2_SYSROOT" + # binutils has its own embedded libtool, which is old and strips out + # `--sysroot`. Work around by modifying the compiler command to + # include the sysroot flag + export CC="%{target-stage1}-gcc --sysroot=$STAGE2_SYSROOT" + ./configure --prefix="%{prefix}" --disable-nls --disable-werror \ + --build=$(sh config.guess) \ + --host=%{target-stage1} \ + --target=%{target-stage1} + + build-commands: + - | + export STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" + make diff --git a/build-essential/stage2-busybox.bst b/build-essential/stage2-busybox.bst new file mode 100644 index 00000000..12e770dd --- /dev/null +++ b/build-essential/stage2-busybox.bst @@ -0,0 +1,99 @@ +kind: manual + +sources: +- kind: git + url: upstream:busybox + track: 1_23_1 + ref: 1ecfe811fe2f70380170ef7d820e8150054e88ca + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-glibc.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + + configure-commands: + # Explicitly setting HOSTCC is required because we have a 'gcc' earlier in + # the PATH supplied by the stage2-gcc chunk, which can't execute outside of + # the stage 3 staging area. + - make HOSTCC="/usr/bin/gcc" CROSS_COMPILE=%{target-stage1}- KCONFIG_NOTIMESTAMP=1 defconfig + + # Avoid dividing applets between %{prefix}/[s]bin and %{prefix}/usr/[s]bin. + - '[ "%{prefix}" = /usr ] || sed -e ''s/.*INSTALL_NO_USR.*/CONFIG_INSTALL_NO_USR=y/'' + -i .config' + # We have GAWK. + - sed -e 's/CONFIG_AWK=y.*/# CONFIG_AWK is not set/' -i .config + + # Depends on stuff that was removed since eglibc 2.14. + - sed -e 's/CONFIG_INETD=y.*/# CONFIG_INETD is not set/' -i .config + + # Busybox Patch is incompatible enough with GNU Patch that it can't be + # used for GNULib projects built from Git. + - sed -e 's/CONFIG_PATCH=y.*/# CONFIG_PATCH is not set/' -i .config + + # None of this is needed because we have kmod; and it actually breaks the + # Linux build because depmod isn't compatible enough with util-linux's. + - sed -e 's/CONFIG_DEPMOD=y.*/# CONFIG_DEPMOD is not set/' -i .config + - sed -e 's/CONFIG_INSMOD=y.*/# CONFIG_INSMOD is not set/' -i .config + - sed -e 's/CONFIG_MODPROBE=y.*/# CONFIG_MODPROBE is not set/' -i .config + - sed -e 's/CONFIG_MODPROBE_SMALL=y.*/# CONFIG_MODPROBE_SMALL is not set/' -i .config + - sed -e 's/CONFIG_LSMOD=y.*/# CONFIG_LSMOD is not set/' -i .config + - sed -e 's/CONFIG_RMMOD=y.*/# CONFIG_RMMOD is not set/' -i .config + + # General features that we don't need. + - sed -e 's/CONFIG_FEATURE_MOUNT_CIFS=y.*/# CONFIG_FEATURE_MOUNT_CIFS is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_EXTRA_QUIET=y.*/# CONFIG_FEATURE_EXTRA_QUIET is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_INIT_COREDUMPS=y.*/# CONFIG_FEATURE_INIT_COREDUMPS is not + set/' -i .config + - sed -e 's/CONFIG_FEATURE_INIT_SCTTY=y.*/# CONFIG_FEATURE_INIT_SCTTY is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_INIT_SYSLOG=y.*/# CONFIG_FEATURE_INIT_SYSLOG is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_INITRD=y.*/# CONFIG_FEATURE_INITRD is not set/' -i .config + - sed -e 's/CONFIG_FEATURE_USE_INITTAB=y.*/# CONFIG_FEATURE_USE_INITTAB is not set/' + -i .config + - sed -e 's/CONFIG_FEATURE_MINIX2=y.*/# CONFIG_FEATURE_MINIX2 is not set/' -i .config + - sed -e 's/CONFIG_FSCK_MINIX=y.*/# CONFIG_FSCK_MINIX is not set/' -i .config + - sed -e 's/CONFIG_HALT=y.*/# CONFIG_HALT is not set/' -i .config + - sed -e 's/CONFIG_INIT=y.*/# CONFIG_INIT is not set/' -i .config + - sed -e 's/CONFIG_INIT_TERMINAL_TYPE=y.*/CONFIG_INIT_TERMINAL_TYPE=""/' -i .config + - sed -e 's/CONFIG_LOSETUP=y.*/# CONFIG_LOSETUP is not set/' -i .config + - sed -e 's/CONFIG_LSUSB=y.*/# CONFIG_LSUSB is not set/' -i .config + - sed -e 's/CONFIG_LZMA=y.*/# CONFIG_LZMA is not set/' -i .config + - sed -e 's/CONFIG_MKFS_EXT2=y.*/# CONFIG_MKFS_EXT2 is not set/' -i .config + - sed -e 's/CONFIG_MKFS_MINIX=y.*/# CONFIG_MKFS_MINIX is not set/' -i .config + - sed -e 's/CONFIG_RUNLEVEL=y.*/# CONFIG_RUNLEVEL is not set/' -i .config + - sed -e 's/CONFIG_STRINGS=y.*/# CONFIG_STRINGS is not set/' -i .config + - sed -e 's/CONFIG_UNLZMA=y.*/# CONFIG_UNLZMA is not set/' -i .config + - sed -e 's/CONFIG_UNXZ=y.*/# CONFIG_UNXZ is not set/' -i .config + - sed -e 's/CONFIG_XZ=y.*/# CONFIG_XZ is not set/' -i .config + + build-commands: + - | + export STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" + export CPPFLAGS="--sysroot=$STAGE2_SYSROOT" + export LDFLAGS="--sysroot=$STAGE2_SYSROOT" + make HOSTCC="/usr/bin/gcc" CROSS_COMPILE=%{target-stage1}- KCONFIG_NOTIMESTAMP=1 + + install-commands: + # We expect to be built with a non-standard prefix in stage 2 (i.e. not + # /usr). The install will break if prefix is set to /usr. + - | + export STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" + export CPPFLAGS="--sysroot=$STAGE2_SYSROOT" + export LDFLAGS="--sysroot=$STAGE2_SYSROOT" + make CONFIG_PREFIX="%{install-root}%{prefix}" \ + HOSTCC="/usr/bin/gcc" \ + CROSS_COMPILE=%{target-stage1}- \ + KCONFIG_NOTIMESTAMP=1 install && + chmod 6755 "%{install-root}%{prefix}"/bin/busybox diff --git a/build-essential/stage2-fake-bash.bst b/build-essential/stage2-fake-bash.bst new file mode 100644 index 00000000..8bd5b15a --- /dev/null +++ b/build-essential/stage2-fake-bash.bst @@ -0,0 +1,15 @@ +kind: manual + +depends: +- filename: build-essential/stage1.bst + type: build + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + install-commands: + - printf '#!/bin/sh\nexec /bin/sh "$@"\n' | install -D /proc/self/fd/0 -m 755 "%{install-root}%{prefix}/bin/bash" diff --git a/build-essential/stage2-fhs-dirs.bst b/build-essential/stage2-fhs-dirs.bst new file mode 100644 index 00000000..80ce42f4 --- /dev/null +++ b/build-essential/stage2-fhs-dirs.bst @@ -0,0 +1,31 @@ +kind: manual + +sources: +- kind: git + url: baserock:baserock/fhs-dirs + track: master + ref: 1218cbd38a4f4e9da75af6f7fae946ca92666afb + +depends: +- filename: build-essential/stage1.bst + type: build + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + install-commands: + - sh ./create-fhs-dirs "%{install-root}" + - rmdir "%{install-root}/bin" + - ln -s "%{prefix}/bin" "%{install-root}/bin" + - install -m 644 passwd "%{install-root}/etc/passwd" + - install -m 600 shadow "%{install-root}/etc/shadow" + - install -m 644 interfaces "%{install-root}/etc/network/interfaces" + - install -m 644 group "%{install-root}/etc/group" + - install -m 644 issue "%{install-root}/etc/issue" + - install -m 644 services "%{install-root}/etc/services" + - install -m 644 protocols "%{install-root}/etc/protocols" + - echo baserock > "%{install-root}/etc/hostname" diff --git a/build-essential/stage2-gawk.bst b/build-essential/stage2-gawk.bst new file mode 100644 index 00000000..ee901796 --- /dev/null +++ b/build-essential/stage2-gawk.bst @@ -0,0 +1,28 @@ +kind: autotools + +sources: +- kind: git + url: upstream:gawk + track: gawk-4.1-stable + ref: 925f9363c4b0a5bb9375298afcdcf404efb32587 + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-glibc.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + + configure-commands: + - STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" CPPFLAGS="--sysroot=$STAGE2_SYSROOT" CXX=false + LDFLAGS="--sysroot=$STAGE2_SYSROOT" ./configure --prefix="%{prefix}" --disable-nls + --build=$(sh config.guess) --host=%{target-stage1} + build-commands: + - STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" make diff --git a/build-essential/stage2-gcc-fixed-headers.bst b/build-essential/stage2-gcc-fixed-headers.bst new file mode 100644 index 00000000..a83fca25 --- /dev/null +++ b/build-essential/stage2-gcc-fixed-headers.bst @@ -0,0 +1,37 @@ +kind: manual + +sources: +- kind: git + url: upstream:gcc-tarball + track: baserock/build-essential + ref: b3c9b176c1f10ebeff5700eb3760e9511f23fa06 + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-glibc.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + install-commands: + # Stage 1 GCC's fixincludes process created a limits.h before there was + # a real limits.h available for the target. This step (taken from Linux + # Linux From Scratch) creates a better one so that stage 2 GCC can compile. + # + # THIS IS A FRAGILE HACK! We need to replace the headers. The only way to + # overwrite files in a staging area is to install a new chunk. + # This is undesired behaviour in the long term, as we want to never + # have overlaps, so this functionality may go away. + - | + libgcc_dir=$(dirname $(%{target-stage1}-gcc -print-libgcc-file-name)) + sysroot="$(dirname $(dirname $(pwd)))" + target_libgcc_dir="${libgcc_dir#$sysroot}" + mkdir -p "%{install-root}/$target_libgcc_dir/include-fixed" + cat "gcc/limitx.h" "gcc/glimits.h" "gcc/limity.h" \ + >"%{install-root}/$target_libgcc_dir/include-fixed/limits.h" diff --git a/build-essential/stage2-gcc.bst b/build-essential/stage2-gcc.bst new file mode 100644 index 00000000..445fe6f7 --- /dev/null +++ b/build-essential/stage2-gcc.bst @@ -0,0 +1,102 @@ +kind: manual + +sources: +- kind: git + url: upstream:gcc-tarball + track: baserock/build-essential + ref: b3c9b176c1f10ebeff5700eb3760e9511f23fa06 + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-glibc.bst +- build-essential/stage2-gcc-fixed-headers.bst +- build-essential/stage2-libstdcxx.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + - mkdir o + + # In other projects we specify the sysroot location using CPPFLAGS. + # Here, that breaks because GCC compiles stuff for the *build* machine, + # too ... and this requires using the host's compiler, which cannot use + # the same set of CPPFLAGS as the target. If we specify the sysroot + # using CC instead then we don't interfere, because we are only + # specifying the *host* C compiler. + # + # Configure flag notes: + # 1. It's vital that this compiler runs in the bootstrap machine, and + # targets the same machine (TARGET_STAGE1) so that the stage 1 GCC + # is used instead of the compiler of the build machine. + # 2. See gcc.morph. + # 3. Disable searching /usr/local/include for headers + # 4. This flag causes the correct --sysroot flag to be passed when + # calling stage 1 GCC. + - | + case "%{bst-arch}" in + armv7lhf) ARCH_FLAGS="--with-arch=armv7-a \ + --with-cpu=cortex-a9 \ + --with-tune=cortex-a9 \ + --with-fpu=vfpv3-d16 \ + --with-float=hard" ;; + armv7*) ARCH_FLAGS="--with-arch=armv7-a" ;; + esac + export STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" + export CC="%{target-stage1}-gcc --sysroot=$STAGE2_SYSROOT" + export CXX="%{target-stage1}-g++ --sysroot=$STAGE2_SYSROOT" + export AR="%{target-stage1}-ar" + export RANLIB="%{target-stage1}-ranlib" + cd o && ../configure \ + $ARCH_FLAGS \ + --build=$(sh ../config.guess) \ + `# [1]` --host=%{target-stage1} \ + `# [1]` --target=%{target-stage1} \ + --prefix="%{prefix}" \ + `# [2]` --libdir=%{prefix}/lib \ + `# [3]` --with-local-prefix=%{prefix} \ + `# [4]` --with-build-sysroot="$STAGE2_SYSROOT" \ + --disable-bootstrap \ + --disable-nls \ + --disable-multilib \ + --disable-libgomp \ + --disable-libstdcxx-pch \ + --enable-languages=c,c++ + + build-commands: + - | + case "%{bst-arch}" in + armv5*) sed -i "s/--host=none/--host=armv5/" o/Makefile + sed -i "s/--target=none/--target=armv5/" o/Makefile ;; + armv7*) sed -i "s/--host=none/--host=armv7a/" o/Makefile + sed -i "s/--target=none/--target=armv7a/" o/Makefile ;; + esac + export STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" + cd o && make + + install-commands: + - cd o && make DESTDIR="%{install-root}" install + + # Stage 3 builds need to link against this file in the location that + # it will be in the final system, so we make a temporary link now. + # + # On x86_64 GCC resolutely installs its libraries into lib64. To fix this + # would require hobbling the MULTILIB_OSDIRNAMES field in + # gcc/config/i386/t-linux64 and this might break things, so for now we + # tolerate the inconsistency. + - | + if [ "$(echo %{target} | cut -c -6)" = "x86_64" ]; then + libdir=lib64 + else + libdir=lib + fi + + install -d "%{install-root}/lib" + ln -s "%{prefix}/$libdir/libgcc_s.so" "%{install-root}/lib/" + ln -s "%{prefix}/$libdir/libgcc_s.so.1" "%{install-root}/lib/" diff --git a/build-essential/stage2-glibc.bst b/build-essential/stage2-glibc.bst new file mode 100644 index 00000000..0f0bace5 --- /dev/null +++ b/build-essential/stage2-glibc.bst @@ -0,0 +1,120 @@ +kind: manual + +sources: +- kind: git + url: upstream:glibc + track: release/2.22/master + ref: b995d95a5943785be3ab862b2d3276f3b4a22481 + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + + configure-commands: + - mkdir o + + # Configure flag notes: + # 1. Avoid installing to PREFIX/lib64 on x86_64. + # 2. Location of linux-api-headers. + # 3. Normal flags. See glibc.morph. + # 4. Force configuration values of certain things that can't be detected + # in a cross-compile. + - | + case "%{bst-arch}" in + armv7*) + ARCH_FLAGS="--without-fp" ;; + esac + + export CFLAGS="-O2 $CFLAGS"; export CXX=false; \ + cd o && ../configure \ + $ARCH_FLAGS \ + --build=$(../scripts/config.guess) --host=%{target-stage1} \ + --prefix="%{prefix}" \ + `# [1]` --libdir="%{prefix}/lib" \ + `# [2]` --with-headers="%{prefix}/include" \ + `# [3]` --disable-profile --enable-kernel=2.6.25 \ + `# [4]` libc_cv_c_cleanup=yes libc_cv_ctors_header=yes \ + libc_cv_forced_unwind=yes libc_cv_ssp=no + + build-commands: + - cd o && make localtime=UTC + + install-commands: + - cd o && make install_root="%{install-root}" localtime=UTC install + - mkdir -p "%{install-root}/etc" + - mkdir -p "%{install-root}/etc/ld.so.conf.d" + - | + cat < ld.so.conf + /lib + /usr/lib + /usr/local/lib + include /etc/ld.so.conf.d/*.conf + EOF + - install -m 644 -o root -g root ld.so.conf "%{install-root}/etc/ld.so.conf" + - | + # Fix up GCC to handle the sysroot containing glibc being in a different + # location for each chunk build. + # + # For headers, it's enough to pass -B in the CPPFLAGS. This would work for + # the startup files (crt*.o) as well, except where libtool is involved (in + # which case it strips -B out of your LDFLAGS before calling GCC). We get + # around this by making GCC locate them relative to the environment variable + # STAGE2_SYSROOT, which we can then set along with CPPFLAGS in each stage 2 + # chunk build. + # + # We also force the use of the program loader at PREFIX/lib/ld.so instead + # of its usual home in /lib or /lib64, which is necessary for the output of + # stage 2 to work as a chroot when building stage 3. + + sysroot="$(dirname $(dirname $(pwd)))" + specs_dir="$(dirname $(%{target-stage1}-gcc --print-libgcc-file-name))" + target_specs_dir="%{install-root}/${specs_dir#$sysroot}" + mkdir -p "$target_specs_dir" + + %{target-stage1}-gcc -dumpspecs | + sed -e "s@[gMS]\?crt[1in].o%s@%:getenv(STAGE2_SYSROOT %{libdir}/&)@g" \ + -e "s@/lib\(64\)\?/ld@%{libdir}/ld@g" \ + > "$target_specs_dir/specs-for-sysroot" + + # NASTY HACK # + # We create a symlink to the actual specs here, so that later the + # symlink can be replaced with a dangling link. + # + # This is necessary as we need to have gcc use its internal specs, + # which can differ to the specs generated by `gcc -dumpspecs`. + # + # The dangling symlink will not make it onto the final system, just + # like all other bootstrap only components. + ln -s specs-for-sysroot "$target_specs_dir/specs" + + # Install a symlink for the program interpreter (ld.so) so that binaries + # built in stage 3 before the stage 3 glibc is built can use it. + # FIXME: get a better way of finding the name of the loader. The lib64 + # path is hardcoded into glibc in the file + # sysdeps/unix/sysv/linux/configure. + - install -d %{install-root}/lib + - | + case "%{bst-arch}" in + x86_64) + install -d "%{install-root}/lib64" + ln -s "%{prefix}/lib/ld-linux-x86-64.so.2" \ + "%{install-root}/lib64/ld-linux-x86-64.so.2" ;; + ppc64) + install -d "%{install-root}/lib64" + ln -s "%{prefix}/lib/ld64.so.1" \ + "%{install-root}/lib64/ld64.so.1" ;; + *) + loader=$(basename $(ls "%{install-root}%{prefix}"/lib/ld-linux*)) + [ -z $loader ] && loader=$(basename $(ls "%{install-root}%{prefix}"/lib/ld.so*)) + [ -z $loader ] && ( echo "Bug in stage2-glibc ld.so symlinks" ; exit 1 ) + ln -s "%{prefix}/lib/$loader" "%{install-root}/lib/$loader" + esac diff --git a/build-essential/stage2-libstdcxx.bst b/build-essential/stage2-libstdcxx.bst new file mode 100644 index 00000000..f8a75a23 --- /dev/null +++ b/build-essential/stage2-libstdcxx.bst @@ -0,0 +1,55 @@ +kind: manual + +sources: +- kind: git + url: upstream:gcc-tarball + track: baserock/build-essential + ref: b3c9b176c1f10ebeff5700eb3760e9511f23fa06 + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-glibc.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + - mkdir o + + # Configure flag notes: + # 1. The thread C++ library cannot be built, as the thread C library + # was not build in stage1-gcc. + # 2. Prevents the installation of precompiled include files, which are + # not needed at this stage. + # 3. From LFS: the header location of C++ needs to be explicitly given + # as we are running the configure script from the top-level + # directory. + - | + export STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" + # -fPIC must be given, otherwise it will not be possible to create + # shared libraries linked to libstdc++ + export CPPFLAGS="--sysroot=$STAGE2_SYSROOT -fPIC" + export LDFLAGS="--sysroot=$STAGE2_SYSROOT" + cd o && ../libstdc++-v3/configure \ + --build=$(sh ../config.guess) \ + --host="%{target-stage1}" \ + --target="%{target-stage1}" \ + --prefix="%{prefix}" \ + --disable-nls \ + --disable-shared \ + --disable-multilib \ + `# [1]` --disable-libstdcxx-threads \ + `# [2]` --disable-libstdcxx-pch \ + `# [3]` --with-gxx-include-dir=/tools/%{target-stage1}/include/c++/4.9.2 + + build-commands: + - cd o && make + + install-commands: + - cd o && make DESTDIR="%{install-root}" install diff --git a/build-essential/stage2-linux-api-headers.bst b/build-essential/stage2-linux-api-headers.bst new file mode 100644 index 00000000..d72106c0 --- /dev/null +++ b/build-essential/stage2-linux-api-headers.bst @@ -0,0 +1,41 @@ +kind: manual + +sources: +- kind: git + url: upstream:linux + track: v4.0 + ref: 39a8804455fb23f09157341d3ba7db6d7ae6ee76 + +depends: +- filename: build-essential/stage1.bst + type: build + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + install-commands: + - | + case "%{bst-arch}" in + armv5l) + ARCH="arm" ;; + armv7b|armv7l|armv7lhf) + ARCH="arm" ;; + armv8l64|armv8b64) + ARCH="arm64" ;; + x86_32) + ARCH="i386" ;; + x86_64) + ARCH="x86_64" ;; + ppc64) + ARCH="powerpc" ;; + *) + echo "Error: unsupported Morph architecture: %{bst-arch}" >&2 + exit 1 + esac + ARCH=$ARCH make INSTALL_HDR_PATH=dest headers_install + - install -d "%{install-root}%{includedir}" + - cp -r dest/include/* "%{install-root}%{includedir}" diff --git a/build-essential/stage2-make.bst b/build-essential/stage2-make.bst new file mode 100644 index 00000000..3b760c0d --- /dev/null +++ b/build-essential/stage2-make.bst @@ -0,0 +1,27 @@ +kind: autotools + +sources: +- kind: git + url: upstream:make-tarball + track: baserock/make-4.1-ttyname-segfault-fix + ref: 4978d7129e42340ab9efeb0cb9cae4ad0fa052d4 + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-glibc.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + - STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" CPPFLAGS="--sysroot=$STAGE2_SYSROOT" CXX=false + LDFLAGS="--sysroot=$STAGE2_SYSROOT" ./configure --prefix="%{prefix}" --disable-nls --without-guile + --build=$(sh config/config.guess) --host=%{target-stage1} + build-commands: + - STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" make diff --git a/build-essential/stage2-reset-specs.bst b/build-essential/stage2-reset-specs.bst new file mode 100644 index 00000000..4b3b6f91 --- /dev/null +++ b/build-essential/stage2-reset-specs.bst @@ -0,0 +1,33 @@ +kind: manual + +depends: +- filename: build-essential/stage1.bst + type: build +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-glibc.bst + +variables: + prefix: /tools + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + # Nasty hack to get around being unable to reliably add configuration to gcc, + # hence the gcc specs are modified, combined with Baserock's rootfs protection + # preventing specs being modified before builds. + # The limitation is overcome by installing files as part of a chunk, which + # overwrites previous files. + # New specs were added for the bootstrap builds, but after stage2 we start + # having chrooted builds, so the old specs need to be replaced. + # Unfortunately we can't just replace the specs with the ones gcc produces, + # since gcc behaves differently without specs to with specs it produces! + # So we use a **NASTY HACK** to replace the specs symlink with one that + # points to a file that doesn't exist. + install-commands: + - | + STAGE2_SYSROOT="$(dirname $(dirname $(pwd)))" + specs_dir="$(dirname $(%{target-stage1}-gcc -print-libgcc-file-name))" + target_specs_dir="%{install-root}/${specs_dir#$STAGE2_SYSROOT}" + mkdir -p "$target_specs_dir" + ln -s "temporary specs removed by baserock bootstrap" "$target_specs_dir/specs" diff --git a/build-essential/stage2.bst b/build-essential/stage2.bst new file mode 100644 index 00000000..09ed6be0 --- /dev/null +++ b/build-essential/stage2.bst @@ -0,0 +1,19 @@ +kind: stack + +depends: +- build-essential/stage2-binutils.bst +- build-essential/stage2-busybox.bst +- build-essential/stage2-fhs-dirs.bst +- build-essential/stage2-glibc.bst +- build-essential/stage2-gawk.bst +- build-essential/stage2-gcc.bst +- build-essential/stage2-linux-api-headers.bst +- build-essential/stage2-make.bst +- build-essential/stage2-reset-specs.bst + +# Stage 2 is a minimal base used to build the +# base runtime, must ldconfig when building on stage2 +public: + bst: + integration-commands: + - ldconfig diff --git a/build-essential/zlib.bst b/build-essential/zlib.bst new file mode 100644 index 00000000..17849abd --- /dev/null +++ b/build-essential/zlib.bst @@ -0,0 +1,23 @@ +kind: manual + +sources: +- kind: git + url: upstream:zlib + track: v1.2.8 + ref: 50893291621658f355bc5b4d450a8d06a563053d + +depends: +- filename: build-essential/stage2.bst + type: build +- build-essential/glibc.bst + +environment: + PATH: /tools/bin:/usr/bin:/bin:/usr/sbin:/sbin + +config: + configure-commands: + - ./configure --prefix="%{prefix}" + build-commands: + - make + install-commands: + - make DESTDIR="%{install-root}" install diff --git a/gedit.bst b/gedit.bst deleted file mode 100644 index 8ec9bdd0..00000000 --- a/gedit.bst +++ /dev/null @@ -1,16 +0,0 @@ -kind: autotools -description: gedit module -sources: -- kind: git - url: gnome:gedit - track: master - ref: b1d7de77c27c021b481b79bbc9369327368d7710 - submodules: - libgd: - url: gnome:libgd -depends: -- filename: gnome-sdk.bst -- filename: gnome-platform.bst -- filename: gtksourceview.bst -- filename: gspell.bst -- filename: libpeas.bst diff --git a/gnome-platform.bst b/gnome-platform.bst deleted file mode 100644 index 79346805..00000000 --- a/gnome-platform.bst +++ /dev/null @@ -1,23 +0,0 @@ -kind: import -description: Import the GNOME Platform -config: - source: files -public: - bst: - integration-commands: - - ldconfig -arches: - x86_64: - sources: - - kind: ostree - url: https://sdk.gnome.org/repo/ - track: runtime/org.gnome.Platform/x86_64/3.22 - gpg-key: keys/gnome-sdk.gpg - ref: af7b50663d808bf5cc6eb7538a3481b29c34864d71b719562246071113a18327 - i386: - sources: - - kind: ostree - url: https://sdk.gnome.org/repo/ - track: runtime/org.gnome.Platform/i386/3.22 - gpg-key: keys/gnome-sdk.gpg - ref: 8c86378e95d305097e64a7b04e23595773ab894ed5d216b49777a22819bff08f diff --git a/gnome-sdk.bst b/gnome-sdk.bst deleted file mode 100644 index 6c645fa3..00000000 --- a/gnome-sdk.bst +++ /dev/null @@ -1,27 +0,0 @@ -kind: import -description: Import the GNOME SDK -config: - source: files - target: usr -public: - bst: - integration-commands: - - | - if [ -d "/app/share/glib-2.0/schemas" ]; then - glib-compile-schemas /app/share/glib-2.0/schemas - fi -arches: - x86_64: - sources: - - kind: ostree - url: https://sdk.gnome.org/repo/ - track: runtime/org.gnome.Sdk/x86_64/3.22 - gpg-key: keys/gnome-sdk.gpg - ref: bc2d97521fa42ca824b4d28b1b7746e275820b26aa63c9ae08d6aa5eefcfee20 - i386: - sources: - - kind: ostree - url: https://sdk.gnome.org/repo/ - track: runtime/org.gnome.Sdk/i386/3.22 - gpg-key: keys/gnome-sdk.gpg - ref: f5616d5b7257a81a8e8b08c34cd7ffcfe3b79c80439c969799dc8617fd9ac5c5 diff --git a/gspell.bst b/gspell.bst deleted file mode 100644 index 5028861f..00000000 --- a/gspell.bst +++ /dev/null @@ -1,10 +0,0 @@ -kind: autotools -description: gspell module -sources: -- kind: git - url: gnome:gspell - track: 1.2.0 - ref: 372ad5dd7d7f18950f8f013bf31efda505dfa449 -depends: -- filename: gnome-sdk.bst -- filename: gnome-platform.bst diff --git a/gtksourceview.bst b/gtksourceview.bst deleted file mode 100644 index d5242da2..00000000 --- a/gtksourceview.bst +++ /dev/null @@ -1,16 +0,0 @@ -kind: autotools -description: gtksourceview module -sources: -- kind: git - url: gnome:gtksourceview - track: gnome-3-22 - ref: e996f1c73bf1bbc766ff920a67258f9ad2e31c16 -depends: -- filename: gnome-sdk.bst -- filename: gnome-platform.bst -config: - configure-commands: - - | - %{autogen} - - | - %{configure} --disable-Werror diff --git a/libpeas.bst b/libpeas.bst deleted file mode 100644 index 0e6b7719..00000000 --- a/libpeas.bst +++ /dev/null @@ -1,16 +0,0 @@ -kind: autotools -description: libpeas module -sources: -- kind: git - url: gnome:libpeas - track: libpeas-1.18.0 - ref: 05d8b7d8ddb5875a0355ba3664733998e2621221 -depends: -- filename: gnome-sdk.bst -- filename: gnome-platform.bst -variables: - conf-cmd: ./autogen.sh -config: - configure-commands: - - | - %{configure} diff --git a/project.conf b/project.conf index 15069bb1..9ea4e31d 100644 --- a/project.conf +++ b/project.conf @@ -1,21 +1,53 @@ -# Gedit text editor flatpakish build demo +# Building baserock build-essential in BuildStream # -name: gedit +name: build-essential aliases: - gnome: git://git.gnome.org/ + upstream: ssh://git@git.baserock.org/delta/ + baserock: ssh://git@git.baserock.org/baserock/ + gnomesdk: https://sdk.gnome.org/ + -# We're gonna eventually try to build a flatpak, -# so lets start trying to override the environment -# in the appropriate ways. -# variables: - prefix: /app + cpu: "%{bst-arch}" + abi: gnu + target-stage1: "%{cpu}-bootstrap-linux-%{abi}" + target: "%{cpu}-baserock-linux-%{abi}" -environment: - CFLAGS: "-O2 -g" - CXXFLAGS: "-O2 -g" - PATH: /app/bin:/usr/bin:/bin:/usr/sbin:/sbin - PKG_CONFIG_PATH: /app/lib/pkgconfig:/usr/lib/pkgconfig - XDG_DATA_DIRS: /app/share:/usr/share - GI_TYPELIB_PATH: /app/lib/girepository-1.0:/usr/lib/girepository-1.0 +# Resolve the cpu and ABI portions of the host triple based +# on archetecture names. +arches: + x86_32: + variables: + cpu: i686 + armv5l: + variables: + abi: gnueabi + armv7b: + variables: + abi: gnueabi + armv7l: + variables: + abi: gnueabi + armv7lhf: + variables: + abi: gnueabi + armv8l64: + variables: + cpu: aarch64 + armv8b64: + variables: + cpu: aarch64_be + mips64b: + variables: + cpu: mips64 + abi: gnuabi64 + mips64l: + variables: + cpu: mips64el + mips32b: + variables: + cpu: mips + mips32l: + variables: + cpu: mipsel -- cgit v1.2.1