summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--DEFAULTS197
-rw-r--r--VERSION2
2 files changed, 198 insertions, 1 deletions
diff --git a/DEFAULTS b/DEFAULTS
new file mode 100644
index 00000000..1b587728
--- /dev/null
+++ b/DEFAULTS
@@ -0,0 +1,197 @@
+# Baserock definitions defaults
+# =============================
+#
+# The DEFAULTS file is treated specially by Baserock build tools.
+#
+# For more information, see: <http://wiki.baserock.org/definitions/current>.
+
+
+# Predefined build commands
+# -------------------------
+#
+# Common patterns in build instructions can be defined here, which can save
+# users from having to write lots of similar-looking chunk .morph files.
+#
+# There are pre- and post- variants for each set of commands. These exist so
+# you can add more commands without having to copy the defaults. For example,
+# to create an extra symlink after running `make install`, you can use
+# post-install-commands. Since these exist as a way of extending the defaults,
+# you cannot set default values for the pre- and post- commands.
+#
+# The set of environment variables available when these commands are executed
+# is not formally specified right now, but you can assume PREFIX, DESTDIR and
+# MORPH_ARCH are all set.
+#
+build-systems:
+ manual:
+ # The special, default 'no-op' build system.
+ configure-commands: []
+ build-commands: []
+ install-commands: []
+ strip-commands: []
+
+ autotools:
+ # GNU Autoconf and GNU Automake, or anything which follow the same pattern.
+ #
+ # See also: https://github.com/cgwalters/build-api/blob/master/build-api.md
+ configure-commands:
+ - >-
+ export NOCONFIGURE=1;
+ if [ -e autogen ]; then ./autogen;
+ elif [ -e autogen.sh ]; then ./autogen.sh;
+ elif [ ! -e ./configure ]; then autoreconf -ivf;
+ fi
+ - ./configure --prefix="$PREFIX"
+ build-commands:
+ - make
+ install-commands:
+ - make DESTDIR="$DESTDIR" install
+ strip-commands:
+ # TODO: Make idempotent when files are hardlinks
+ # Strip all ELF binary files that are executable or named like a library.
+ # .so files for C, .cmxs for OCaml and .node for Node.
+ #
+ # The file name and permissions checks are done with the `find` command before
+ # the ELF header is checked with the shell command, because it is a lot cheaper
+ # to check the mode and file name first, because it is a metadata check, rather
+ # than a subprocess and a file read.
+ #
+ # `file` is not used, to keep the dependency requirements down.
+ - &generic-strip-command |
+ find "$DESTDIR" -type f \
+ '(' -perm -111 -o -name '*.so*' -o -name '*.cmxs' -o -name '*.node' ')' \
+ -exec sh -ec \
+ 'read -n4 hdr <"$1" # check for elf header
+ if [ "$hdr" != "$(printf \\x7fELF)" ]; then
+ exit 0
+ fi
+ debugfile="$DESTDIR$PREFIX/lib/debug/$(basename "$1")"
+ mkdir -p "$(dirname "$debugfile")"
+ objcopy --only-keep-debug "$1" "$debugfile"
+ chmod 644 "$debugfile"
+ strip --remove-section=.comment --remove-section=.note --strip-unneeded "$1"
+ objcopy --add-gnu-debuglink "$debugfile" "$1"' - {} ';'
+
+ python-distutils:
+ # The Python distutils build systems.
+ configure-commands: []
+ build-commands:
+ - python setup.py build
+ install-commands:
+ - python setup.py install --prefix "$PREFIX" --root "$DESTDIR"
+ strip-commands:
+ - *generic-strip-command
+
+ cpan:
+ # The Perl ExtUtil::MakeMaker build system. This is called the 'cpan' build
+ # system for historical reasons.
+ #
+ # To install perl distributions into the correct location in our chroot
+ # we need to set PREFIX to <destdir>/<prefix> in the configure-commands.
+ #
+ # The mapping between PREFIX and the final installation
+ # directories is complex and depends upon the configuration of perl
+ # see,
+ # https://metacpan.org/pod/distribution/perl/INSTALL#Installation-Directories
+ # and ExtUtil::MakeMaker's documentation for more details.
+ configure-commands:
+ - perl Makefile.PL PREFIX=$DESTDIR$PREFIX
+ build-commands:
+ - make
+ install-commands:
+ - make install
+ strip-commands:
+ - *generic-strip-command
+
+ module-build:
+ # The Module::Build build system
+ #
+ # See the comment in ExtUtilsMakeMakerBuildSystem to see why --prefix is
+ # set to $DESTDIR$PREFIX here (--prefix in Module::Build has the same
+ # meaning as PREFIX in ExtUtils::MakeMaker).
+ configure-commands:
+ - perl Build.PL --prefix "$DESTDIR$PREFIX"
+ build-commands:
+ - ./Build
+ install-commands:
+ - ./Build install
+ strip-commands:
+ - *generic-strip-command
+
+ cmake:
+ # The CMake build system.
+ configure-commands:
+ - cmake -DCMAKE_INSTALL_PREFIX="$PREFIX"
+ build-commands:
+ - make
+ install-commands:
+ - make DESTDIR="$DESTDIR" install
+ strip-commands:
+ - *generic-strip-command
+
+ qmake:
+ # The Qt build system.
+ configure-commands:
+ - qmake -makefile
+ build-commands:
+ - make
+ install-commands:
+ - make INSTALL_ROOT="$DESTDIR" install
+ strip-commands:
+ - *generic-strip-command
+
+
+# Predefined artifact splitting rules
+# -----------------------------------
+#
+# Once a build has completed, you have some files that have been installed into
+# $DESTDIR. The splitting rules control how many 'artifact' tarballs are
+# generated as a result of the build, and which files from $DESTDIR end up in
+# which 'artifact'.
+#
+# The default split rules are defined here. These can be overriden in
+# individual chunk .morph files and stratum .morph files using the 'products'
+# field.
+#
+split-rules:
+ chunk:
+ - artifact: -bins
+ include:
+ - (usr/)?s?bin/.*
+ - artifact: -libs
+ include:
+ - (usr/)?lib(32|64)?/lib[^/]*\.so(\.\d+)*
+ - (usr/)libexec/.*
+ - artifact: -devel
+ include:
+ - (usr/)?include/.*
+ - (usr/)?lib(32|64)?/lib.*\.a
+ - (usr/)?lib(32|64)?/lib.*\.la
+ - (usr/)?(lib(32|64)?|share)/pkgconfig/.*\.pc
+ - artifact: -doc
+ include:
+ - (usr/)?share/doc/.*
+ - (usr/)?share/man/.*
+ - (usr/)?share/info/.*
+ - artifact: -locale
+ include:
+ - (usr/)?share/locale/.*
+ - (usr/)?share/i18n/.*
+ - (usr/)?share/zoneinfo/.*
+ - artifact: -misc
+ include:
+ - .*
+
+ stratum:
+ - artifact: -devel
+ include:
+ - .*-devel
+ - .*-debug
+ - .*-doc
+ - artifact: -runtime
+ include:
+ - .*-bins
+ - .*-libs
+ - .*-locale
+ - .*-misc
+ - .*
diff --git a/VERSION b/VERSION
index 0eaf7e67..e8b0c161 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-version: 6
+version: 7